2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
linux-next/fs/io_uring.c

10009 lines
240 KiB
C
Raw Normal View History

Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Shared application/kernel submission and completion ring pairs, for
* supporting fast/efficient IO.
*
* A note on the read/write ordering memory barriers that are matched between
* the application and kernel side.
*
* After the application reads the CQ ring tail, it must use an
* appropriate smp_rmb() to pair with the smp_wmb() the kernel uses
* before writing the tail (using smp_load_acquire to read the tail will
* do). It also needs a smp_mb() before updating CQ head (ordering the
* entry load(s) with the head store), pairing with an implicit barrier
* through a control-dependency in io_get_cqring (smp_store_release to
* store head will do). Failure to do so could lead to reading invalid
* CQ entries.
*
* Likewise, the application must use an appropriate smp_wmb() before
* writing the SQ tail (ordering SQ entry stores with the tail store),
* which pairs with smp_load_acquire in io_get_sqring (smp_store_release
* to store the tail will do). And it needs a barrier ordering the SQ
* head load before writing new SQ entries (smp_load_acquire to read
* head will do).
*
* When using the SQ poll thread (IORING_SETUP_SQPOLL), the application
* needs to check the SQ flags for IORING_SQ_NEED_WAKEUP *after*
* updating the SQ tail; a full memory barrier smp_mb() is needed
* between.
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
*
* Also see the examples in the liburing library:
*
* git://git.kernel.dk/liburing
*
* io_uring also uses READ/WRITE_ONCE() for _any_ store or load that happens
* from data shared between the kernel and application. This is done both
* for ordering purposes, but also to ensure that once a value is loaded from
* data that the application could potentially modify, it remains stable.
*
* Copyright (C) 2018-2019 Jens Axboe
* Copyright (c) 2018-2019 Christoph Hellwig
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/syscalls.h>
#include <linux/compat.h>
#include <net/compat.h>
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#include <linux/refcount.h>
#include <linux/uio.h>
#include <linux/bits.h>
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#include <linux/sched/signal.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/percpu.h>
#include <linux/slab.h>
#include <linux/kthread.h>
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#include <linux/blkdev.h>
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
#include <linux/bvec.h>
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#include <linux/net.h>
#include <net/sock.h>
#include <net/af_unix.h>
#include <net/scm.h>
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#include <linux/anon_inodes.h>
#include <linux/sched/mm.h>
#include <linux/uaccess.h>
#include <linux/nospec.h>
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
#include <linux/sizes.h>
#include <linux/hugetlb.h>
#include <linux/highmem.h>
#include <linux/namei.h>
#include <linux/fsnotify.h>
#include <linux/fadvise.h>
#include <linux/eventpoll.h>
#include <linux/fs_struct.h>
#include <linux/splice.h>
#include <linux/task_work.h>
#include <linux/pagemap.h>
#include <linux/io_uring.h>
#include <linux/blk-cgroup.h>
#include <linux/audit.h>
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#define CREATE_TRACE_POINTS
#include <trace/events/io_uring.h>
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#include <uapi/linux/io_uring.h>
#include "internal.h"
#include "io-wq.h"
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#define IORING_MAX_ENTRIES 32768
#define IORING_MAX_CQ_ENTRIES (2 * IORING_MAX_ENTRIES)
/*
* Shift of 9 is 512 entries, or exactly one page on 64-bit archs
*/
#define IORING_FILE_TABLE_SHIFT 9
#define IORING_MAX_FILES_TABLE (1U << IORING_FILE_TABLE_SHIFT)
#define IORING_FILE_TABLE_MASK (IORING_MAX_FILES_TABLE - 1)
#define IORING_MAX_FIXED_FILES (64 * IORING_MAX_FILES_TABLE)
#define IORING_MAX_RESTRICTIONS (IORING_RESTRICTION_LAST + \
IORING_REGISTER_LAST + IORING_OP_LAST)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
struct io_uring {
u32 head ____cacheline_aligned_in_smp;
u32 tail ____cacheline_aligned_in_smp;
};
/*
* This data is shared with the application through the mmap at offsets
* IORING_OFF_SQ_RING and IORING_OFF_CQ_RING.
*
* The offsets to the member fields are published through struct
* io_sqring_offsets when calling io_uring_setup.
*/
struct io_rings {
/*
* Head and tail offsets into the ring; the offsets need to be
* masked to get valid indices.
*
* The kernel controls head of the sq ring and the tail of the cq ring,
* and the application controls tail of the sq ring and the head of the
* cq ring.
*/
struct io_uring sq, cq;
/*
* Bitmasks to apply to head and tail offsets (constant, equals
* ring_entries - 1)
*/
u32 sq_ring_mask, cq_ring_mask;
/* Ring sizes (constant, power of 2) */
u32 sq_ring_entries, cq_ring_entries;
/*
* Number of invalid entries dropped by the kernel due to
* invalid index stored in array
*
* Written by the kernel, shouldn't be modified by the
* application (i.e. get number of "new events" by comparing to
* cached value).
*
* After a new SQ head value was read by the application this
* counter includes all submissions that were dropped reaching
* the new SQ head (and possibly more).
*/
u32 sq_dropped;
/*
* Runtime SQ flags
*
* Written by the kernel, shouldn't be modified by the
* application.
*
* The application needs a full memory barrier before checking
* for IORING_SQ_NEED_WAKEUP after updating the sq tail.
*/
u32 sq_flags;
/*
* Runtime CQ flags
*
* Written by the application, shouldn't be modified by the
* kernel.
*/
u32 cq_flags;
/*
* Number of completion events lost because the queue was full;
* this should be avoided by the application by making sure
* there are not more requests pending than there is space in
* the completion queue.
*
* Written by the kernel, shouldn't be modified by the
* application (i.e. get number of "new events" by comparing to
* cached value).
*
* As completion events come in out of order this counter is not
* ordered with any other data.
*/
u32 cq_overflow;
/*
* Ring buffer of completion events.
*
* The kernel writes completion events fresh every time they are
* produced, so the application is allowed to modify pending
* entries.
*/
struct io_uring_cqe cqes[] ____cacheline_aligned_in_smp;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
};
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
struct io_mapped_ubuf {
u64 ubuf;
size_t len;
struct bio_vec *bvec;
unsigned int nr_bvecs;
unsigned long acct_pages;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
};
struct fixed_file_table {
struct file **files;
};
struct fixed_file_ref_node {
struct percpu_ref refs;
struct list_head node;
struct list_head file_list;
struct fixed_file_data *file_data;
struct llist_node llist;
bool done;
};
struct fixed_file_data {
struct fixed_file_table *table;
struct io_ring_ctx *ctx;
struct fixed_file_ref_node *node;
struct percpu_ref refs;
struct completion done;
struct list_head ref_list;
spinlock_t lock;
};
struct io_buffer {
struct list_head list;
__u64 addr;
__s32 len;
__u16 bid;
};
struct io_restriction {
DECLARE_BITMAP(register_op, IORING_REGISTER_LAST);
DECLARE_BITMAP(sqe_op, IORING_OP_LAST);
u8 sqe_flags_allowed;
u8 sqe_flags_required;
bool registered;
};
struct io_sq_data {
refcount_t refs;
struct mutex lock;
/* ctx's that are using this sqd */
struct list_head ctx_list;
struct list_head ctx_new_list;
struct mutex ctx_lock;
struct task_struct *thread;
struct wait_queue_head wait;
unsigned sq_thread_idle;
};
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
struct io_ring_ctx {
struct {
struct percpu_ref refs;
} ____cacheline_aligned_in_smp;
struct {
unsigned int flags;
unsigned int compat: 1;
unsigned int limit_mem: 1;
unsigned int cq_overflow_flushed: 1;
unsigned int drain_next: 1;
unsigned int eventfd_async: 1;
unsigned int restricted: 1;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/*
* Ring buffer of indices into array of io_uring_sqe, which is
* mmapped by the application using the IORING_OFF_SQES offset.
*
* This indirection could e.g. be used to assign fixed
* io_uring_sqe entries to operations and only submit them to
* the queue when needed.
*
* The kernel modifies neither the indices array nor the entries
* array.
*/
u32 *sq_array;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
unsigned cached_sq_head;
unsigned sq_entries;
unsigned sq_mask;
unsigned sq_thread_idle;
unsigned cached_sq_dropped;
unsigned cached_cq_overflow;
unsigned long sq_check_overflow;
struct list_head defer_list;
struct list_head timeout_list;
struct list_head cq_overflow_list;
struct io_uring_sqe *sq_sqes;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
} ____cacheline_aligned_in_smp;
struct io_rings *rings;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/* IO offload */
struct io_wq *io_wq;
/*
* For SQPOLL usage - we hold a reference to the parent task, so we
* have access to the ->files
*/
struct task_struct *sqo_task;
/* Only used for accounting purposes */
struct mm_struct *mm_account;
#ifdef CONFIG_BLK_CGROUP
struct cgroup_subsys_state *sqo_blkcg_css;
#endif
struct io_sq_data *sq_data; /* if using sq thread polling */
struct wait_queue_head sqo_sq_wait;
struct list_head sqd_list;
/*
* If used, fixed file set. Writers must ensure that ->refs is dead,
* readers must ensure that ->refs is alive as long as the file* is
* used. Only updated through io_uring_register(2).
*/
struct fixed_file_data *file_data;
unsigned nr_user_files;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
/* if used, fixed mapped user buffers */
unsigned nr_user_bufs;
struct io_mapped_ubuf *user_bufs;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
struct user_struct *user;
io_uring: use current task creds instead of allocating a new one syzbot reports: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9217 Comm: io_uring-sq Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:creds_are_invalid kernel/cred.c:792 [inline] RIP: 0010:__validate_creds include/linux/cred.h:187 [inline] RIP: 0010:override_creds+0x9f/0x170 kernel/cred.c:550 Code: ac 25 00 81 fb 64 65 73 43 0f 85 a3 37 00 00 e8 17 ab 25 00 49 8d 7c 24 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 96 00 00 00 41 8b 5c 24 10 bf RSP: 0018:ffff88809c45fda0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000043736564 RCX: ffffffff814f3318 RDX: 0000000000000002 RSI: ffffffff814f3329 RDI: 0000000000000010 RBP: ffff88809c45fdb8 R08: ffff8880a3aac240 R09: ffffed1014755849 R10: ffffed1014755848 R11: ffff8880a3aac247 R12: 0000000000000000 R13: ffff888098ab1600 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd51c40664 CR3: 0000000092641000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: io_sq_thread+0x1c7/0xa20 fs/io_uring.c:3274 kthread+0x361/0x430 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Modules linked in: ---[ end trace f2e1a4307fbe2245 ]--- RIP: 0010:creds_are_invalid kernel/cred.c:792 [inline] RIP: 0010:__validate_creds include/linux/cred.h:187 [inline] RIP: 0010:override_creds+0x9f/0x170 kernel/cred.c:550 Code: ac 25 00 81 fb 64 65 73 43 0f 85 a3 37 00 00 e8 17 ab 25 00 49 8d 7c 24 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 96 00 00 00 41 8b 5c 24 10 bf RSP: 0018:ffff88809c45fda0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000043736564 RCX: ffffffff814f3318 RDX: 0000000000000002 RSI: ffffffff814f3329 RDI: 0000000000000010 RBP: ffff88809c45fdb8 R08: ffff8880a3aac240 R09: ffffed1014755849 R10: ffffed1014755848 R11: ffff8880a3aac247 R12: 0000000000000000 R13: ffff888098ab1600 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd51c40664 CR3: 0000000092641000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 which is caused by slab fault injection triggering a failure in prepare_creds(). We don't actually need to create a copy of the creds as we're not modifying it, we just need a reference on the current task creds. This avoids the failure case as well, and propagates the const throughout the stack. Fixes: 181e448d8709 ("io_uring: async workers should inherit the user creds") Reported-by: syzbot+5320383e16029ba057ff@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-02 23:50:00 +08:00
const struct cred *creds;
#ifdef CONFIG_AUDIT
kuid_t loginuid;
unsigned int sessionid;
#endif
struct completion ref_comp;
struct completion sq_thread_comp;
/* if all else fails... */
struct io_kiocb *fallback_req;
#if defined(CONFIG_UNIX)
struct socket *ring_sock;
#endif
struct idr io_buffer_idr;
struct idr personality_idr;
struct {
unsigned cached_cq_tail;
unsigned cq_entries;
unsigned cq_mask;
atomic_t cq_timeouts;
unsigned long cq_check_overflow;
struct wait_queue_head cq_wait;
struct fasync_struct *cq_fasync;
struct eventfd_ctx *cq_ev_fd;
} ____cacheline_aligned_in_smp;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
struct {
struct mutex uring_lock;
wait_queue_head_t wait;
} ____cacheline_aligned_in_smp;
struct {
spinlock_t completion_lock;
/*
* ->iopoll_list is protected by the ctx->uring_lock for
* io_uring instances that don't use IORING_SETUP_SQPOLL.
* For SQPOLL, only the single threaded io_sq_thread() will
* manipulate the list, hence no extra locking is needed there.
*/
struct list_head iopoll_list;
struct hlist_head *cancel_hash;
unsigned cancel_hash_bits;
bool poll_multi_file;
spinlock_t inflight_lock;
struct list_head inflight_list;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
} ____cacheline_aligned_in_smp;
struct delayed_work file_put_work;
struct llist_head file_put_llist;
struct work_struct exit_work;
struct io_restriction restrictions;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
};
/*
* First field must be the file pointer in all the
* iocb unions! See also 'struct kiocb' in <linux/fs.h>
*/
struct io_poll_iocb {
struct file *file;
struct wait_queue_head *head;
__poll_t events;
io_uring: fix poll races This is a straight port of Al's fix for the aio poll implementation, since the io_uring version is heavily based on that. The below description is almost straight from that patch, just modified to fit the io_uring situation. io_poll() has to cope with several unpleasant problems: * requests that might stay around indefinitely need to be made visible for io_cancel(2); that must not be done to a request already completed, though. * in cases when ->poll() has placed us on a waitqueue, wakeup might have happened (and request completed) before ->poll() returns. * worse, in some early wakeup cases request might end up re-added into the queue later - we can't treat "woken up and currently not in the queue" as "it's not going to stick around indefinitely" * ... moreover, ->poll() might have decided not to put it on any queues to start with, and that needs to be distinguished from the previous case * ->poll() might have tried to put us on more than one queue. Only the first will succeed for io poll, so we might end up missing wakeups. OTOH, we might very well notice that only after the wakeup hits and request gets completed (all before ->poll() gets around to the second poll_wait()). In that case it's too late to decide that we have an error. req->woken was an attempt to deal with that. Unfortunately, it was broken. What we need to keep track of is not that wakeup has happened - the thing might come back after that. It's that async reference is already gone and won't come back, so we can't (and needn't) put the request on the list of cancellables. The easiest case is "request hadn't been put on any waitqueues"; we can tell by seeing NULL apt.head, and in that case there won't be anything async. We should either complete the request ourselves (if vfs_poll() reports anything of interest) or return an error. In all other cases we get exclusion with wakeups by grabbing the queue lock. If request is currently on queue and we have something interesting from vfs_poll(), we can steal it and complete the request ourselves. If it's on queue and vfs_poll() has not reported anything interesting, we either put it on the cancellable list, or, if we know that it hadn't been put on all queues ->poll() wanted it on, we steal it and return an error. If it's _not_ on queue, it's either been already dealt with (in which case we do nothing), or there's io_poll_complete_work() about to be executed. In that case we either put it on the cancellable list, or, if we know it hadn't been put on all queues ->poll() wanted it on, simulate what cancel would've done. Fixes: 221c5eb23382 ("io_uring: add support for IORING_OP_POLL") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-13 05:48:16 +08:00
bool done;
bool canceled;
struct wait_queue_entry wait;
};
struct io_poll_remove {
struct file *file;
u64 addr;
};
struct io_close {
struct file *file;
struct file *put_file;
int fd;
};
struct io_timeout_data {
struct io_kiocb *req;
struct hrtimer timer;
struct timespec64 ts;
enum hrtimer_mode mode;
};
struct io_accept {
struct file *file;
struct sockaddr __user *addr;
int __user *addr_len;
int flags;
unsigned long nofile;
};
struct io_sync {
struct file *file;
loff_t len;
loff_t off;
int flags;
int mode;
};
struct io_cancel {
struct file *file;
u64 addr;
};
struct io_timeout {
struct file *file;
u32 off;
u32 target_seq;
struct list_head list;
/* head of the link, used by linked timeouts only */
struct io_kiocb *head;
};
struct io_timeout_rem {
struct file *file;
u64 addr;
/* timeout update */
struct timespec64 ts;
u32 flags;
};
struct io_rw {
/* NOTE: kiocb has the file as the first member, so don't do it here */
struct kiocb kiocb;
u64 addr;
u64 len;
};
struct io_connect {
struct file *file;
struct sockaddr __user *addr;
int addr_len;
};
struct io_sr_msg {
struct file *file;
union {
struct user_msghdr __user *umsg;
void __user *buf;
};
int msg_flags;
int bgid;
size_t len;
struct io_buffer *kbuf;
};
struct io_open {
struct file *file;
int dfd;
bool ignore_nonblock;
struct filename *filename;
struct open_how how;
unsigned long nofile;
};
struct io_files_update {
struct file *file;
u64 arg;
u32 nr_args;
u32 offset;
};
struct io_fadvise {
struct file *file;
u64 offset;
u32 len;
u32 advice;
};
struct io_madvise {
struct file *file;
u64 addr;
u32 len;
u32 advice;
};
struct io_epoll {
struct file *file;
int epfd;
int op;
int fd;
struct epoll_event event;
};
struct io_splice {
struct file *file_out;
struct file *file_in;
loff_t off_out;
loff_t off_in;
u64 len;
unsigned int flags;
};
struct io_provide_buf {
struct file *file;
__u64 addr;
__s32 len;
__u32 bgid;
__u16 nbufs;
__u16 bid;
};
struct io_statx {
struct file *file;
int dfd;
unsigned int mask;
unsigned int flags;
const char __user *filename;
struct statx __user *buffer;
};
struct io_shutdown {
struct file *file;
int how;
};
struct io_rename {
struct file *file;
int old_dfd;
int new_dfd;
struct filename *oldpath;
struct filename *newpath;
int flags;
};
struct io_unlink {
struct file *file;
int dfd;
int flags;
struct filename *filename;
};
struct io_completion {
struct file *file;
struct list_head list;
int cflags;
};
struct io_async_connect {
struct sockaddr_storage address;
};
struct io_async_msghdr {
struct iovec fast_iov[UIO_FASTIOV];
struct iovec *iov;
struct sockaddr __user *uaddr;
struct msghdr msg;
struct sockaddr_storage addr;
};
struct io_async_rw {
struct iovec fast_iov[UIO_FASTIOV];
const struct iovec *free_iovec;
struct iov_iter iter;
size_t bytes_done;
struct wait_page_queue wpq;
};
enum {
REQ_F_FIXED_FILE_BIT = IOSQE_FIXED_FILE_BIT,
REQ_F_IO_DRAIN_BIT = IOSQE_IO_DRAIN_BIT,
REQ_F_LINK_BIT = IOSQE_IO_LINK_BIT,
REQ_F_HARDLINK_BIT = IOSQE_IO_HARDLINK_BIT,
REQ_F_FORCE_ASYNC_BIT = IOSQE_ASYNC_BIT,
REQ_F_BUFFER_SELECT_BIT = IOSQE_BUFFER_SELECT_BIT,
REQ_F_FAIL_LINK_BIT,
REQ_F_INFLIGHT_BIT,
REQ_F_CUR_POS_BIT,
REQ_F_NOWAIT_BIT,
REQ_F_LINK_TIMEOUT_BIT,
REQ_F_ISREG_BIT,
REQ_F_NEED_CLEANUP_BIT,
REQ_F_POLLED_BIT,
REQ_F_BUFFER_SELECTED_BIT,
REQ_F_NO_FILE_TABLE_BIT,
REQ_F_WORK_INITIALIZED_BIT,
REQ_F_LTIMEOUT_ACTIVE_BIT,
/* not a real bit, just to check we're not overflowing the space */
__REQ_F_LAST_BIT,
};
enum {
/* ctx owns file */
REQ_F_FIXED_FILE = BIT(REQ_F_FIXED_FILE_BIT),
/* drain existing IO first */
REQ_F_IO_DRAIN = BIT(REQ_F_IO_DRAIN_BIT),
/* linked sqes */
REQ_F_LINK = BIT(REQ_F_LINK_BIT),
/* doesn't sever on completion < 0 */
REQ_F_HARDLINK = BIT(REQ_F_HARDLINK_BIT),
/* IOSQE_ASYNC */
REQ_F_FORCE_ASYNC = BIT(REQ_F_FORCE_ASYNC_BIT),
/* IOSQE_BUFFER_SELECT */
REQ_F_BUFFER_SELECT = BIT(REQ_F_BUFFER_SELECT_BIT),
/* fail rest of links */
REQ_F_FAIL_LINK = BIT(REQ_F_FAIL_LINK_BIT),
/* on inflight list */
REQ_F_INFLIGHT = BIT(REQ_F_INFLIGHT_BIT),
/* read/write uses file position */
REQ_F_CUR_POS = BIT(REQ_F_CUR_POS_BIT),
/* must not punt to workers */
REQ_F_NOWAIT = BIT(REQ_F_NOWAIT_BIT),
/* has or had linked timeout */
REQ_F_LINK_TIMEOUT = BIT(REQ_F_LINK_TIMEOUT_BIT),
/* regular file */
REQ_F_ISREG = BIT(REQ_F_ISREG_BIT),
/* needs cleanup */
REQ_F_NEED_CLEANUP = BIT(REQ_F_NEED_CLEANUP_BIT),
/* already went through poll handler */
REQ_F_POLLED = BIT(REQ_F_POLLED_BIT),
/* buffer already selected */
REQ_F_BUFFER_SELECTED = BIT(REQ_F_BUFFER_SELECTED_BIT),
/* doesn't need file table for this request */
REQ_F_NO_FILE_TABLE = BIT(REQ_F_NO_FILE_TABLE_BIT),
/* io_wq_work is initialized */
REQ_F_WORK_INITIALIZED = BIT(REQ_F_WORK_INITIALIZED_BIT),
/* linked timeout is active, i.e. prepared by link's head */
REQ_F_LTIMEOUT_ACTIVE = BIT(REQ_F_LTIMEOUT_ACTIVE_BIT),
};
struct async_poll {
struct io_poll_iocb poll;
struct io_poll_iocb *double_poll;
};
/*
* NOTE! Each of the iocb union members has the file pointer
* as the first entry in their struct definition. So you can
* access the file pointer through any of the sub-structs,
* or directly as just 'ki_filp' in this struct.
*/
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
struct io_kiocb {
union {
struct file *file;
struct io_rw rw;
struct io_poll_iocb poll;
struct io_poll_remove poll_remove;
struct io_accept accept;
struct io_sync sync;
struct io_cancel cancel;
struct io_timeout timeout;
struct io_timeout_rem timeout_rem;
struct io_connect connect;
struct io_sr_msg sr_msg;
struct io_open open;
struct io_close close;
struct io_files_update files_update;
struct io_fadvise fadvise;
struct io_madvise madvise;
struct io_epoll epoll;
struct io_splice splice;
struct io_provide_buf pbuf;
struct io_statx statx;
struct io_shutdown shutdown;
struct io_rename rename;
struct io_unlink unlink;
/* use only after cleaning per-op data, see io_clean_op() */
struct io_completion compl;
};
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/* opcode allocated if it needs to store data for async defer */
void *async_data;
u8 opcode;
/* polled IO has completed */
u8 iopoll_completed;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
u16 buf_index;
u32 result;
struct io_ring_ctx *ctx;
unsigned int flags;
refcount_t refs;
struct task_struct *task;
u64 user_data;
struct io_kiocb *link;
struct percpu_ref *fixed_file_refs;
/*
* 1. used with ctx->iopoll_list with reads/writes
* 2. to track reqs with ->files (see io_op_def::file_table)
*/
struct list_head inflight_entry;
struct callback_head task_work;
/* for polled requests, i.e. IORING_OP_POLL_ADD and async armed poll */
struct hlist_node hash_node;
struct async_poll *apoll;
struct io_wq_work work;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
};
struct io_defer_entry {
struct list_head list;
struct io_kiocb *req;
u32 seq;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
};
#define IO_IOPOLL_BATCH 8
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
struct io_comp_state {
unsigned int nr;
struct list_head list;
struct io_ring_ctx *ctx;
};
struct io_submit_state {
struct blk_plug plug;
/*
* io_kiocb alloc cache
*/
void *reqs[IO_IOPOLL_BATCH];
unsigned int free_reqs;
bool plug_started;
/*
* Batch completion logic
*/
struct io_comp_state comp;
/*
* File reference cache
*/
struct file *file;
unsigned int fd;
unsigned int file_refs;
unsigned int ios_left;
};
struct io_op_def {
/* needs req->file assigned */
unsigned needs_file : 1;
/* don't fail if file grab fails */
unsigned needs_file_no_error : 1;
/* hash wq insertion if file is a regular file */
unsigned hash_reg_file : 1;
/* unbound wq insertion if file is a non-regular file */
unsigned unbound_nonreg_file : 1;
/* opcode is not supported by this kernel */
unsigned not_supported : 1;
/* set if opcode supports polled "wait" */
unsigned pollin : 1;
unsigned pollout : 1;
/* op supports buffer selection */
unsigned buffer_select : 1;
/* must always have async data allocated */
unsigned needs_async_data : 1;
/* should block plug */
unsigned plug : 1;
/* size of async data needed, if any */
unsigned short async_size;
unsigned work_flags;
};
static const struct io_op_def io_op_defs[] = {
[IORING_OP_NOP] = {},
[IORING_OP_READV] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.needs_async_data = 1,
.plug = 1,
.async_size = sizeof(struct io_async_rw),
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG,
},
[IORING_OP_WRITEV] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.needs_async_data = 1,
.plug = 1,
.async_size = sizeof(struct io_async_rw),
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG |
IO_WQ_WORK_FSIZE,
},
[IORING_OP_FSYNC] = {
.needs_file = 1,
.work_flags = IO_WQ_WORK_BLKCG,
},
[IORING_OP_READ_FIXED] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.plug = 1,
.async_size = sizeof(struct io_async_rw),
.work_flags = IO_WQ_WORK_BLKCG | IO_WQ_WORK_MM,
},
[IORING_OP_WRITE_FIXED] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.plug = 1,
.async_size = sizeof(struct io_async_rw),
.work_flags = IO_WQ_WORK_BLKCG | IO_WQ_WORK_FSIZE |
IO_WQ_WORK_MM,
},
[IORING_OP_POLL_ADD] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
},
[IORING_OP_POLL_REMOVE] = {},
[IORING_OP_SYNC_FILE_RANGE] = {
.needs_file = 1,
.work_flags = IO_WQ_WORK_BLKCG,
},
[IORING_OP_SENDMSG] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.needs_async_data = 1,
.async_size = sizeof(struct io_async_msghdr),
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG,
},
[IORING_OP_RECVMSG] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.needs_async_data = 1,
.async_size = sizeof(struct io_async_msghdr),
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG,
},
[IORING_OP_TIMEOUT] = {
.needs_async_data = 1,
.async_size = sizeof(struct io_timeout_data),
.work_flags = IO_WQ_WORK_MM,
},
[IORING_OP_TIMEOUT_REMOVE] = {
/* used by timeout updates' prep() */
.work_flags = IO_WQ_WORK_MM,
},
[IORING_OP_ACCEPT] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_FILES,
},
[IORING_OP_ASYNC_CANCEL] = {},
[IORING_OP_LINK_TIMEOUT] = {
.needs_async_data = 1,
.async_size = sizeof(struct io_timeout_data),
.work_flags = IO_WQ_WORK_MM,
},
[IORING_OP_CONNECT] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.needs_async_data = 1,
.async_size = sizeof(struct io_async_connect),
.work_flags = IO_WQ_WORK_MM,
},
[IORING_OP_FALLOCATE] = {
.needs_file = 1,
.work_flags = IO_WQ_WORK_BLKCG | IO_WQ_WORK_FSIZE,
},
[IORING_OP_OPENAT] = {
.work_flags = IO_WQ_WORK_FILES | IO_WQ_WORK_BLKCG |
IO_WQ_WORK_FS | IO_WQ_WORK_MM,
},
[IORING_OP_CLOSE] = {
.needs_file = 1,
.needs_file_no_error = 1,
.work_flags = IO_WQ_WORK_FILES | IO_WQ_WORK_BLKCG,
},
[IORING_OP_FILES_UPDATE] = {
.work_flags = IO_WQ_WORK_FILES | IO_WQ_WORK_MM,
},
[IORING_OP_STATX] = {
.work_flags = IO_WQ_WORK_FILES | IO_WQ_WORK_MM |
IO_WQ_WORK_FS | IO_WQ_WORK_BLKCG,
},
[IORING_OP_READ] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.plug = 1,
.async_size = sizeof(struct io_async_rw),
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG,
},
[IORING_OP_WRITE] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.plug = 1,
.async_size = sizeof(struct io_async_rw),
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG |
IO_WQ_WORK_FSIZE,
},
[IORING_OP_FADVISE] = {
.needs_file = 1,
.work_flags = IO_WQ_WORK_BLKCG,
},
[IORING_OP_MADVISE] = {
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG,
},
[IORING_OP_SEND] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG,
},
[IORING_OP_RECV] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_BLKCG,
},
[IORING_OP_OPENAT2] = {
.work_flags = IO_WQ_WORK_FILES | IO_WQ_WORK_FS |
IO_WQ_WORK_BLKCG | IO_WQ_WORK_MM,
},
[IORING_OP_EPOLL_CTL] = {
.unbound_nonreg_file = 1,
.work_flags = IO_WQ_WORK_FILES,
},
[IORING_OP_SPLICE] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.work_flags = IO_WQ_WORK_BLKCG,
},
[IORING_OP_PROVIDE_BUFFERS] = {},
[IORING_OP_REMOVE_BUFFERS] = {},
[IORING_OP_TEE] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
},
[IORING_OP_SHUTDOWN] = {
.needs_file = 1,
},
[IORING_OP_RENAMEAT] = {
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_FILES |
IO_WQ_WORK_FS | IO_WQ_WORK_BLKCG,
},
[IORING_OP_UNLINKAT] = {
.work_flags = IO_WQ_WORK_MM | IO_WQ_WORK_FILES |
IO_WQ_WORK_FS | IO_WQ_WORK_BLKCG,
},
};
enum io_mem_account {
ACCT_LOCKED,
ACCT_PINNED,
};
static void __io_complete_rw(struct io_kiocb *req, long res, long res2,
struct io_comp_state *cs);
static void io_cqring_fill_event(struct io_kiocb *req, long res);
static void io_put_req(struct io_kiocb *req);
static void io_put_req_deferred(struct io_kiocb *req, int nr);
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
static void io_double_put_req(struct io_kiocb *req);
static struct io_kiocb *io_prep_linked_timeout(struct io_kiocb *req);
io_uring: fix recursive completion locking on oveflow flush syszbot reports a scenario where we recurse on the completion lock when flushing an overflow: 1 lock held by syz-executor287/6816: #0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333 stack backtrace: CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2391 [inline] check_deadlock kernel/locking/lockdep.c:2432 [inline] validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202 __lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426 lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167 spin_lock_irq include/linux/spinlock.h:379 [inline] io_queue_linked_timeout fs/io_uring.c:5928 [inline] __io_queue_async_work fs/io_uring.c:1192 [inline] __io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237 io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359 io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808 io_uring_release+0x59/0x70 fs/io_uring.c:7829 __fput+0x34f/0x7b0 fs/file_table.c:281 task_work_run+0x137/0x1c0 kernel/task_work.c:135 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0x5f3/0x1f20 kernel/exit.c:806 do_group_exit+0x161/0x2d0 kernel/exit.c:903 __do_sys_exit_group+0x13/0x20 kernel/exit.c:914 __se_sys_exit_group+0x10/0x10 kernel/exit.c:912 __x64_sys_exit_group+0x37/0x40 kernel/exit.c:912 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by passing back the link from __io_queue_async_work(), and then let the caller handle the queueing of the link. Take care to also punt the submission reference put to the caller, as we're holding the completion lock for the __io_queue_defer() case. Hence we need to mark the io_kiocb appropriately for that case. Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-10 23:55:22 +08:00
static void __io_queue_linked_timeout(struct io_kiocb *req);
static void io_queue_linked_timeout(struct io_kiocb *req);
static int __io_sqe_files_update(struct io_ring_ctx *ctx,
struct io_uring_files_update *ip,
unsigned nr_args);
static void __io_clean_op(struct io_kiocb *req);
static struct file *io_file_get(struct io_submit_state *state,
struct io_kiocb *req, int fd, bool fixed);
static void __io_queue_sqe(struct io_kiocb *req, struct io_comp_state *cs);
static void io_file_put_work(struct work_struct *work);
static ssize_t io_import_iovec(int rw, struct io_kiocb *req,
struct iovec **iovec, struct iov_iter *iter,
bool needs_lock);
static int io_setup_async_rw(struct io_kiocb *req, const struct iovec *iovec,
const struct iovec *fast_iov,
struct iov_iter *iter, bool force);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static struct kmem_cache *req_cachep;
static const struct file_operations io_uring_fops;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
struct sock *io_uring_get_socket(struct file *file)
{
#if defined(CONFIG_UNIX)
if (file->f_op == &io_uring_fops) {
struct io_ring_ctx *ctx = file->private_data;
return ctx->ring_sock->sk;
}
#endif
return NULL;
}
EXPORT_SYMBOL(io_uring_get_socket);
#define io_for_each_link(pos, head) \
for (pos = (head); pos; pos = pos->link)
static inline void io_clean_op(struct io_kiocb *req)
{
if (req->flags & (REQ_F_NEED_CLEANUP | REQ_F_BUFFER_SELECTED |
REQ_F_INFLIGHT))
__io_clean_op(req);
}
static inline void io_set_resource_node(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
if (!req->fixed_file_refs) {
req->fixed_file_refs = &ctx->file_data->node->refs;
percpu_ref_get(req->fixed_file_refs);
}
}
static bool io_match_task(struct io_kiocb *head,
struct task_struct *task,
struct files_struct *files)
{
struct io_kiocb *req;
if (task && head->task != task)
return false;
if (!files)
return true;
io_for_each_link(req, head) {
if ((req->flags & REQ_F_WORK_INITIALIZED) &&
(req->work.flags & IO_WQ_WORK_FILES) &&
req->work.identity->files == files)
return true;
}
return false;
}
static void io_sq_thread_drop_mm_files(void)
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
{
struct files_struct *files = current->files;
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
struct mm_struct *mm = current->mm;
if (mm) {
kthread_unuse_mm(mm);
mmput(mm);
current->mm = NULL;
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
}
if (files) {
struct nsproxy *nsproxy = current->nsproxy;
task_lock(current);
current->files = NULL;
current->nsproxy = NULL;
task_unlock(current);
put_files_struct(files);
put_nsproxy(nsproxy);
}
}
static int __io_sq_thread_acquire_files(struct io_ring_ctx *ctx)
{
if (!current->files) {
struct files_struct *files;
struct nsproxy *nsproxy;
task_lock(ctx->sqo_task);
files = ctx->sqo_task->files;
if (!files) {
task_unlock(ctx->sqo_task);
return -EOWNERDEAD;
}
atomic_inc(&files->count);
get_nsproxy(ctx->sqo_task->nsproxy);
nsproxy = ctx->sqo_task->nsproxy;
task_unlock(ctx->sqo_task);
task_lock(current);
current->files = files;
current->nsproxy = nsproxy;
task_unlock(current);
}
return 0;
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
}
static int __io_sq_thread_acquire_mm(struct io_ring_ctx *ctx)
{
struct mm_struct *mm;
if (current->mm)
return 0;
/* Should never happen */
if (unlikely(!(ctx->flags & IORING_SETUP_SQPOLL)))
return -EFAULT;
task_lock(ctx->sqo_task);
mm = ctx->sqo_task->mm;
if (unlikely(!mm || !mmget_not_zero(mm)))
mm = NULL;
task_unlock(ctx->sqo_task);
if (mm) {
kthread_use_mm(mm);
return 0;
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
}
return -EFAULT;
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
}
static int io_sq_thread_acquire_mm_files(struct io_ring_ctx *ctx,
struct io_kiocb *req)
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
{
const struct io_op_def *def = &io_op_defs[req->opcode];
int ret;
if (def->work_flags & IO_WQ_WORK_MM) {
ret = __io_sq_thread_acquire_mm(ctx);
if (unlikely(ret))
return ret;
}
if (def->needs_file || (def->work_flags & IO_WQ_WORK_FILES)) {
ret = __io_sq_thread_acquire_files(ctx);
if (unlikely(ret))
return ret;
}
return 0;
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
}
static void io_sq_thread_associate_blkcg(struct io_ring_ctx *ctx,
struct cgroup_subsys_state **cur_css)
{
#ifdef CONFIG_BLK_CGROUP
/* puts the old one when swapping */
if (*cur_css != ctx->sqo_blkcg_css) {
kthread_associate_blkcg(ctx->sqo_blkcg_css);
*cur_css = ctx->sqo_blkcg_css;
}
#endif
}
static void io_sq_thread_unassociate_blkcg(void)
{
#ifdef CONFIG_BLK_CGROUP
kthread_associate_blkcg(NULL);
#endif
}
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
static inline void req_set_fail_links(struct io_kiocb *req)
{
if ((req->flags & (REQ_F_LINK | REQ_F_HARDLINK)) == REQ_F_LINK)
req->flags |= REQ_F_FAIL_LINK;
}
/*
* None of these are dereferenced, they are simply used to check if any of
* them have changed. If we're under current and check they are still the
* same, we're fine to grab references to them for actual out-of-line use.
*/
static void io_init_identity(struct io_identity *id)
{
id->files = current->files;
id->mm = current->mm;
#ifdef CONFIG_BLK_CGROUP
rcu_read_lock();
id->blkcg_css = blkcg_css();
rcu_read_unlock();
#endif
id->creds = current_cred();
id->nsproxy = current->nsproxy;
id->fs = current->fs;
id->fsize = rlimit(RLIMIT_FSIZE);
#ifdef CONFIG_AUDIT
id->loginuid = current->loginuid;
id->sessionid = current->sessionid;
#endif
refcount_set(&id->count, 1);
}
static inline void __io_req_init_async(struct io_kiocb *req)
{
memset(&req->work, 0, sizeof(req->work));
req->flags |= REQ_F_WORK_INITIALIZED;
}
/*
* Note: must call io_req_init_async() for the first time you
* touch any members of io_wq_work.
*/
static inline void io_req_init_async(struct io_kiocb *req)
{
struct io_uring_task *tctx = current->io_uring;
if (req->flags & REQ_F_WORK_INITIALIZED)
return;
__io_req_init_async(req);
/* Grab a ref if this isn't our static identity */
req->work.identity = tctx->identity;
if (tctx->identity != &tctx->__identity)
refcount_inc(&req->work.identity->count);
}
static inline bool io_async_submit(struct io_ring_ctx *ctx)
{
return ctx->flags & IORING_SETUP_SQPOLL;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static void io_ring_ctx_ref_free(struct percpu_ref *ref)
{
struct io_ring_ctx *ctx = container_of(ref, struct io_ring_ctx, refs);
complete(&ctx->ref_comp);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static inline bool io_is_timeout_noseq(struct io_kiocb *req)
{
return !req->timeout.off;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static struct io_ring_ctx *io_ring_ctx_alloc(struct io_uring_params *p)
{
struct io_ring_ctx *ctx;
int hash_bits;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return NULL;
ctx->fallback_req = kmem_cache_alloc(req_cachep, GFP_KERNEL);
if (!ctx->fallback_req)
goto err;
/*
* Use 5 bits less than the max cq entries, that should give us around
* 32 entries per hash list if totally full and uniformly spread.
*/
hash_bits = ilog2(p->cq_entries);
hash_bits -= 5;
if (hash_bits <= 0)
hash_bits = 1;
ctx->cancel_hash_bits = hash_bits;
ctx->cancel_hash = kmalloc((1U << hash_bits) * sizeof(struct hlist_head),
GFP_KERNEL);
if (!ctx->cancel_hash)
goto err;
__hash_init(ctx->cancel_hash, 1U << hash_bits);
if (percpu_ref_init(&ctx->refs, io_ring_ctx_ref_free,
PERCPU_REF_ALLOW_REINIT, GFP_KERNEL))
goto err;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
ctx->flags = p->flags;
init_waitqueue_head(&ctx->sqo_sq_wait);
INIT_LIST_HEAD(&ctx->sqd_list);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
init_waitqueue_head(&ctx->cq_wait);
INIT_LIST_HEAD(&ctx->cq_overflow_list);
init_completion(&ctx->ref_comp);
init_completion(&ctx->sq_thread_comp);
idr_init(&ctx->io_buffer_idr);
idr_init(&ctx->personality_idr);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
mutex_init(&ctx->uring_lock);
init_waitqueue_head(&ctx->wait);
spin_lock_init(&ctx->completion_lock);
INIT_LIST_HEAD(&ctx->iopoll_list);
INIT_LIST_HEAD(&ctx->defer_list);
INIT_LIST_HEAD(&ctx->timeout_list);
spin_lock_init(&ctx->inflight_lock);
INIT_LIST_HEAD(&ctx->inflight_list);
INIT_DELAYED_WORK(&ctx->file_put_work, io_file_put_work);
init_llist_head(&ctx->file_put_llist);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return ctx;
err:
if (ctx->fallback_req)
kmem_cache_free(req_cachep, ctx->fallback_req);
kfree(ctx->cancel_hash);
kfree(ctx);
return NULL;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static bool req_need_defer(struct io_kiocb *req, u32 seq)
{
if (unlikely(req->flags & REQ_F_IO_DRAIN)) {
struct io_ring_ctx *ctx = req->ctx;
return seq != ctx->cached_cq_tail
+ READ_ONCE(ctx->cached_cq_overflow);
}
return false;
}
static void __io_commit_cqring(struct io_ring_ctx *ctx)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_rings *rings = ctx->rings;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/* order cqe stores with ring update */
smp_store_release(&rings->cq.tail, ctx->cached_cq_tail);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
if (wq_has_sleeper(&ctx->cq_wait)) {
wake_up_interruptible(&ctx->cq_wait);
kill_fasync(&ctx->cq_fasync, SIGIO, POLL_IN);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
}
static void io_put_identity(struct io_uring_task *tctx, struct io_kiocb *req)
{
if (req->work.identity == &tctx->__identity)
return;
if (refcount_dec_and_test(&req->work.identity->count))
kfree(req->work.identity);
}
static void io_req_clean_work(struct io_kiocb *req)
{
if (!(req->flags & REQ_F_WORK_INITIALIZED))
return;
req->flags &= ~REQ_F_WORK_INITIALIZED;
if (req->work.flags & IO_WQ_WORK_MM) {
mmdrop(req->work.identity->mm);
req->work.flags &= ~IO_WQ_WORK_MM;
}
#ifdef CONFIG_BLK_CGROUP
if (req->work.flags & IO_WQ_WORK_BLKCG) {
css_put(req->work.identity->blkcg_css);
req->work.flags &= ~IO_WQ_WORK_BLKCG;
}
#endif
if (req->work.flags & IO_WQ_WORK_CREDS) {
put_cred(req->work.identity->creds);
req->work.flags &= ~IO_WQ_WORK_CREDS;
}
if (req->work.flags & IO_WQ_WORK_FS) {
struct fs_struct *fs = req->work.identity->fs;
spin_lock(&req->work.identity->fs->lock);
if (--fs->users)
fs = NULL;
spin_unlock(&req->work.identity->fs->lock);
if (fs)
free_fs_struct(fs);
req->work.flags &= ~IO_WQ_WORK_FS;
}
io_put_identity(req->task->io_uring, req);
}
/*
* Create a private copy of io_identity, since some fields don't match
* the current context.
*/
static bool io_identity_cow(struct io_kiocb *req)
{
struct io_uring_task *tctx = current->io_uring;
const struct cred *creds = NULL;
struct io_identity *id;
if (req->work.flags & IO_WQ_WORK_CREDS)
creds = req->work.identity->creds;
id = kmemdup(req->work.identity, sizeof(*id), GFP_KERNEL);
if (unlikely(!id)) {
req->work.flags |= IO_WQ_WORK_CANCEL;
return false;
}
/*
* We can safely just re-init the creds we copied Either the field
* matches the current one, or we haven't grabbed it yet. The only
* exception is ->creds, through registered personalities, so handle
* that one separately.
*/
io_init_identity(id);
if (creds)
id->creds = creds;
/* add one for this request */
refcount_inc(&id->count);
io_uring: drop req/tctx io_identity separately We can't bundle this into one operation, as the identity may not have originated from the tctx to begin with. Drop one ref for each of them separately, if they don't match the static assignment. If we don't, then if the identity is a lookup from registered credentials, we could be freeing that identity as we're dropping a reference assuming it came from the tctx. syzbot reports this as a use-after-free, as the identity is still referencable from idr lookup: ================================================================== BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:101 [inline] BUG: KASAN: use-after-free in atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline] BUG: KASAN: use-after-free in __refcount_add include/linux/refcount.h:193 [inline] BUG: KASAN: use-after-free in __refcount_inc include/linux/refcount.h:250 [inline] BUG: KASAN: use-after-free in refcount_inc include/linux/refcount.h:267 [inline] BUG: KASAN: use-after-free in io_init_req fs/io_uring.c:6700 [inline] BUG: KASAN: use-after-free in io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774 Write of size 4 at addr ffff888011e08e48 by task syz-executor165/8487 CPU: 1 PID: 8487 Comm: syz-executor165 Not tainted 5.10.0-rc1-next-20201102-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x13d/0x180 mm/kasan/generic.c:192 instrument_atomic_read_write include/linux/instrumented.h:101 [inline] atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline] __refcount_add include/linux/refcount.h:193 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] io_init_req fs/io_uring.c:6700 [inline] io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774 __do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x440e19 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 0f fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff644ff178 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000440e19 RDX: 0000000000000000 RSI: 000000000000450c RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000022b4850 R13: 0000000000000010 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 8487: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:461 kmalloc include/linux/slab.h:552 [inline] io_register_personality fs/io_uring.c:9638 [inline] __io_uring_register fs/io_uring.c:9874 [inline] __do_sys_io_uring_register+0x10f0/0x40a0 fs/io_uring.c:9924 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 8487: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x102/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1577 slab_free mm/slub.c:3140 [inline] kfree+0xdb/0x360 mm/slub.c:4122 io_identity_cow fs/io_uring.c:1380 [inline] io_prep_async_work+0x903/0xbc0 fs/io_uring.c:1492 io_prep_async_link fs/io_uring.c:1505 [inline] io_req_defer fs/io_uring.c:5999 [inline] io_queue_sqe+0x212/0xed0 fs/io_uring.c:6448 io_submit_sqe fs/io_uring.c:6542 [inline] io_submit_sqes+0x14f6/0x25f0 fs/io_uring.c:6784 __do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff888011e08e00 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 72 bytes inside of 96-byte region [ffff888011e08e00, ffff888011e08e60) The buggy address belongs to the page: page:00000000a7104751 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e08 flags: 0xfff00000000200(slab) raw: 00fff00000000200 ffffea00004f8540 0000001f00000002 ffff888010041780 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888011e08d00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc ffff888011e08d80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc > ffff888011e08e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888011e08e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc ffff888011e08f00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc ================================================================== Reported-by: syzbot+625ce3bb7835b63f7f3d@syzkaller.appspotmail.com Fixes: 1e6fa5216a0e ("io_uring: COW io_identity on mismatch") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-04 03:19:07 +08:00
/* drop tctx and req identity references, if needed */
if (tctx->identity != &tctx->__identity &&
refcount_dec_and_test(&tctx->identity->count))
kfree(tctx->identity);
if (req->work.identity != &tctx->__identity &&
refcount_dec_and_test(&req->work.identity->count))
kfree(req->work.identity);
req->work.identity = id;
tctx->identity = id;
return true;
}
static bool io_grab_identity(struct io_kiocb *req)
{
const struct io_op_def *def = &io_op_defs[req->opcode];
struct io_identity *id = req->work.identity;
struct io_ring_ctx *ctx = req->ctx;
if (def->work_flags & IO_WQ_WORK_FSIZE) {
if (id->fsize != rlimit(RLIMIT_FSIZE))
return false;
req->work.flags |= IO_WQ_WORK_FSIZE;
}
#ifdef CONFIG_BLK_CGROUP
if (!(req->work.flags & IO_WQ_WORK_BLKCG) &&
(def->work_flags & IO_WQ_WORK_BLKCG)) {
rcu_read_lock();
if (id->blkcg_css != blkcg_css()) {
rcu_read_unlock();
return false;
}
/*
* This should be rare, either the cgroup is dying or the task
* is moving cgroups. Just punt to root for the handful of ios.
*/
if (css_tryget_online(id->blkcg_css))
req->work.flags |= IO_WQ_WORK_BLKCG;
rcu_read_unlock();
}
#endif
if (!(req->work.flags & IO_WQ_WORK_CREDS)) {
if (id->creds != current_cred())
return false;
get_cred(id->creds);
req->work.flags |= IO_WQ_WORK_CREDS;
}
#ifdef CONFIG_AUDIT
if (!uid_eq(current->loginuid, id->loginuid) ||
current->sessionid != id->sessionid)
return false;
#endif
if (!(req->work.flags & IO_WQ_WORK_FS) &&
(def->work_flags & IO_WQ_WORK_FS)) {
if (current->fs != id->fs)
return false;
spin_lock(&id->fs->lock);
if (!id->fs->in_exec) {
id->fs->users++;
req->work.flags |= IO_WQ_WORK_FS;
} else {
req->work.flags |= IO_WQ_WORK_CANCEL;
}
spin_unlock(&current->fs->lock);
}
if (!(req->work.flags & IO_WQ_WORK_FILES) &&
(def->work_flags & IO_WQ_WORK_FILES) &&
!(req->flags & REQ_F_NO_FILE_TABLE)) {
if (id->files != current->files ||
id->nsproxy != current->nsproxy)
return false;
atomic_inc(&id->files->count);
get_nsproxy(id->nsproxy);
req->flags |= REQ_F_INFLIGHT;
spin_lock_irq(&ctx->inflight_lock);
list_add(&req->inflight_entry, &ctx->inflight_list);
spin_unlock_irq(&ctx->inflight_lock);
req->work.flags |= IO_WQ_WORK_FILES;
}
return true;
}
static void io_prep_async_work(struct io_kiocb *req)
{
const struct io_op_def *def = &io_op_defs[req->opcode];
struct io_ring_ctx *ctx = req->ctx;
struct io_identity *id;
io_req_init_async(req);
id = req->work.identity;
if (req->flags & REQ_F_FORCE_ASYNC)
req->work.flags |= IO_WQ_WORK_CONCURRENT;
if (req->flags & REQ_F_ISREG) {
if (def->hash_reg_file || (ctx->flags & IORING_SETUP_IOPOLL))
io_wq_hash_work(&req->work, file_inode(req->file));
} else {
if (def->unbound_nonreg_file)
req->work.flags |= IO_WQ_WORK_UNBOUND;
}
/* ->mm can never change on us */
if (!(req->work.flags & IO_WQ_WORK_MM) &&
(def->work_flags & IO_WQ_WORK_MM)) {
mmgrab(id->mm);
req->work.flags |= IO_WQ_WORK_MM;
}
/* if we fail grabbing identity, we must COW, regrab, and retry */
if (io_grab_identity(req))
return;
if (!io_identity_cow(req))
return;
/* can't fail at this point */
if (!io_grab_identity(req))
WARN_ON(1);
}
static void io_prep_async_link(struct io_kiocb *req)
{
struct io_kiocb *cur;
io_for_each_link(cur, req)
io_prep_async_work(cur);
}
io_uring: fix recursive completion locking on oveflow flush syszbot reports a scenario where we recurse on the completion lock when flushing an overflow: 1 lock held by syz-executor287/6816: #0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333 stack backtrace: CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2391 [inline] check_deadlock kernel/locking/lockdep.c:2432 [inline] validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202 __lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426 lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167 spin_lock_irq include/linux/spinlock.h:379 [inline] io_queue_linked_timeout fs/io_uring.c:5928 [inline] __io_queue_async_work fs/io_uring.c:1192 [inline] __io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237 io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359 io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808 io_uring_release+0x59/0x70 fs/io_uring.c:7829 __fput+0x34f/0x7b0 fs/file_table.c:281 task_work_run+0x137/0x1c0 kernel/task_work.c:135 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0x5f3/0x1f20 kernel/exit.c:806 do_group_exit+0x161/0x2d0 kernel/exit.c:903 __do_sys_exit_group+0x13/0x20 kernel/exit.c:914 __se_sys_exit_group+0x10/0x10 kernel/exit.c:912 __x64_sys_exit_group+0x37/0x40 kernel/exit.c:912 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by passing back the link from __io_queue_async_work(), and then let the caller handle the queueing of the link. Take care to also punt the submission reference put to the caller, as we're holding the completion lock for the __io_queue_defer() case. Hence we need to mark the io_kiocb appropriately for that case. Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-10 23:55:22 +08:00
static struct io_kiocb *__io_queue_async_work(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
struct io_kiocb *link = io_prep_linked_timeout(req);
trace_io_uring_queue_async_work(ctx, io_wq_is_hashed(&req->work), req,
&req->work, req->flags);
io_wq_enqueue(ctx->io_wq, &req->work);
io_uring: fix recursive completion locking on oveflow flush syszbot reports a scenario where we recurse on the completion lock when flushing an overflow: 1 lock held by syz-executor287/6816: #0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333 stack backtrace: CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2391 [inline] check_deadlock kernel/locking/lockdep.c:2432 [inline] validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202 __lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426 lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167 spin_lock_irq include/linux/spinlock.h:379 [inline] io_queue_linked_timeout fs/io_uring.c:5928 [inline] __io_queue_async_work fs/io_uring.c:1192 [inline] __io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237 io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359 io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808 io_uring_release+0x59/0x70 fs/io_uring.c:7829 __fput+0x34f/0x7b0 fs/file_table.c:281 task_work_run+0x137/0x1c0 kernel/task_work.c:135 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0x5f3/0x1f20 kernel/exit.c:806 do_group_exit+0x161/0x2d0 kernel/exit.c:903 __do_sys_exit_group+0x13/0x20 kernel/exit.c:914 __se_sys_exit_group+0x10/0x10 kernel/exit.c:912 __x64_sys_exit_group+0x37/0x40 kernel/exit.c:912 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by passing back the link from __io_queue_async_work(), and then let the caller handle the queueing of the link. Take care to also punt the submission reference put to the caller, as we're holding the completion lock for the __io_queue_defer() case. Hence we need to mark the io_kiocb appropriately for that case. Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-10 23:55:22 +08:00
return link;
}
static void io_queue_async_work(struct io_kiocb *req)
{
io_uring: fix recursive completion locking on oveflow flush syszbot reports a scenario where we recurse on the completion lock when flushing an overflow: 1 lock held by syz-executor287/6816: #0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333 stack backtrace: CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2391 [inline] check_deadlock kernel/locking/lockdep.c:2432 [inline] validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202 __lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426 lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167 spin_lock_irq include/linux/spinlock.h:379 [inline] io_queue_linked_timeout fs/io_uring.c:5928 [inline] __io_queue_async_work fs/io_uring.c:1192 [inline] __io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237 io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359 io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808 io_uring_release+0x59/0x70 fs/io_uring.c:7829 __fput+0x34f/0x7b0 fs/file_table.c:281 task_work_run+0x137/0x1c0 kernel/task_work.c:135 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0x5f3/0x1f20 kernel/exit.c:806 do_group_exit+0x161/0x2d0 kernel/exit.c:903 __do_sys_exit_group+0x13/0x20 kernel/exit.c:914 __se_sys_exit_group+0x10/0x10 kernel/exit.c:912 __x64_sys_exit_group+0x37/0x40 kernel/exit.c:912 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by passing back the link from __io_queue_async_work(), and then let the caller handle the queueing of the link. Take care to also punt the submission reference put to the caller, as we're holding the completion lock for the __io_queue_defer() case. Hence we need to mark the io_kiocb appropriately for that case. Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-10 23:55:22 +08:00
struct io_kiocb *link;
/* init ->work of the whole link before punting */
io_prep_async_link(req);
io_uring: fix recursive completion locking on oveflow flush syszbot reports a scenario where we recurse on the completion lock when flushing an overflow: 1 lock held by syz-executor287/6816: #0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333 stack backtrace: CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2391 [inline] check_deadlock kernel/locking/lockdep.c:2432 [inline] validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202 __lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426 lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167 spin_lock_irq include/linux/spinlock.h:379 [inline] io_queue_linked_timeout fs/io_uring.c:5928 [inline] __io_queue_async_work fs/io_uring.c:1192 [inline] __io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237 io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359 io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808 io_uring_release+0x59/0x70 fs/io_uring.c:7829 __fput+0x34f/0x7b0 fs/file_table.c:281 task_work_run+0x137/0x1c0 kernel/task_work.c:135 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0x5f3/0x1f20 kernel/exit.c:806 do_group_exit+0x161/0x2d0 kernel/exit.c:903 __do_sys_exit_group+0x13/0x20 kernel/exit.c:914 __se_sys_exit_group+0x10/0x10 kernel/exit.c:912 __x64_sys_exit_group+0x37/0x40 kernel/exit.c:912 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by passing back the link from __io_queue_async_work(), and then let the caller handle the queueing of the link. Take care to also punt the submission reference put to the caller, as we're holding the completion lock for the __io_queue_defer() case. Hence we need to mark the io_kiocb appropriately for that case. Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-10 23:55:22 +08:00
link = __io_queue_async_work(req);
if (link)
io_queue_linked_timeout(link);
}
static void io_kill_timeout(struct io_kiocb *req)
{
struct io_timeout_data *io = req->async_data;
int ret;
ret = hrtimer_try_to_cancel(&io->timer);
if (ret != -1) {
atomic_set(&req->ctx->cq_timeouts,
atomic_read(&req->ctx->cq_timeouts) + 1);
list_del_init(&req->timeout.list);
io_cqring_fill_event(req, 0);
io_put_req_deferred(req, 1);
}
}
/*
* Returns true if we found and killed one or more timeouts
*/
static bool io_kill_timeouts(struct io_ring_ctx *ctx, struct task_struct *tsk,
struct files_struct *files)
{
struct io_kiocb *req, *tmp;
int canceled = 0;
spin_lock_irq(&ctx->completion_lock);
list_for_each_entry_safe(req, tmp, &ctx->timeout_list, timeout.list) {
if (io_match_task(req, tsk, files)) {
io_kill_timeout(req);
canceled++;
}
}
spin_unlock_irq(&ctx->completion_lock);
return canceled != 0;
}
static void __io_queue_deferred(struct io_ring_ctx *ctx)
{
do {
struct io_defer_entry *de = list_first_entry(&ctx->defer_list,
struct io_defer_entry, list);
io_uring: fix recursive completion locking on oveflow flush syszbot reports a scenario where we recurse on the completion lock when flushing an overflow: 1 lock held by syz-executor287/6816: #0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333 stack backtrace: CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2391 [inline] check_deadlock kernel/locking/lockdep.c:2432 [inline] validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202 __lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426 lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167 spin_lock_irq include/linux/spinlock.h:379 [inline] io_queue_linked_timeout fs/io_uring.c:5928 [inline] __io_queue_async_work fs/io_uring.c:1192 [inline] __io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237 io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359 io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808 io_uring_release+0x59/0x70 fs/io_uring.c:7829 __fput+0x34f/0x7b0 fs/file_table.c:281 task_work_run+0x137/0x1c0 kernel/task_work.c:135 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0x5f3/0x1f20 kernel/exit.c:806 do_group_exit+0x161/0x2d0 kernel/exit.c:903 __do_sys_exit_group+0x13/0x20 kernel/exit.c:914 __se_sys_exit_group+0x10/0x10 kernel/exit.c:912 __x64_sys_exit_group+0x37/0x40 kernel/exit.c:912 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by passing back the link from __io_queue_async_work(), and then let the caller handle the queueing of the link. Take care to also punt the submission reference put to the caller, as we're holding the completion lock for the __io_queue_defer() case. Hence we need to mark the io_kiocb appropriately for that case. Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-10 23:55:22 +08:00
struct io_kiocb *link;
if (req_need_defer(de->req, de->seq))
break;
list_del_init(&de->list);
/* punt-init is done before queueing for defer */
io_uring: fix recursive completion locking on oveflow flush syszbot reports a scenario where we recurse on the completion lock when flushing an overflow: 1 lock held by syz-executor287/6816: #0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333 stack backtrace: CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2391 [inline] check_deadlock kernel/locking/lockdep.c:2432 [inline] validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202 __lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426 lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167 spin_lock_irq include/linux/spinlock.h:379 [inline] io_queue_linked_timeout fs/io_uring.c:5928 [inline] __io_queue_async_work fs/io_uring.c:1192 [inline] __io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237 io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359 io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808 io_uring_release+0x59/0x70 fs/io_uring.c:7829 __fput+0x34f/0x7b0 fs/file_table.c:281 task_work_run+0x137/0x1c0 kernel/task_work.c:135 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0x5f3/0x1f20 kernel/exit.c:806 do_group_exit+0x161/0x2d0 kernel/exit.c:903 __do_sys_exit_group+0x13/0x20 kernel/exit.c:914 __se_sys_exit_group+0x10/0x10 kernel/exit.c:912 __x64_sys_exit_group+0x37/0x40 kernel/exit.c:912 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by passing back the link from __io_queue_async_work(), and then let the caller handle the queueing of the link. Take care to also punt the submission reference put to the caller, as we're holding the completion lock for the __io_queue_defer() case. Hence we need to mark the io_kiocb appropriately for that case. Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-10 23:55:22 +08:00
link = __io_queue_async_work(de->req);
if (link) {
__io_queue_linked_timeout(link);
/* drop submission reference */
io_put_req_deferred(link, 1);
io_uring: fix recursive completion locking on oveflow flush syszbot reports a scenario where we recurse on the completion lock when flushing an overflow: 1 lock held by syz-executor287/6816: #0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333 stack backtrace: CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2391 [inline] check_deadlock kernel/locking/lockdep.c:2432 [inline] validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202 __lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426 lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167 spin_lock_irq include/linux/spinlock.h:379 [inline] io_queue_linked_timeout fs/io_uring.c:5928 [inline] __io_queue_async_work fs/io_uring.c:1192 [inline] __io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237 io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359 io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808 io_uring_release+0x59/0x70 fs/io_uring.c:7829 __fput+0x34f/0x7b0 fs/file_table.c:281 task_work_run+0x137/0x1c0 kernel/task_work.c:135 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0x5f3/0x1f20 kernel/exit.c:806 do_group_exit+0x161/0x2d0 kernel/exit.c:903 __do_sys_exit_group+0x13/0x20 kernel/exit.c:914 __se_sys_exit_group+0x10/0x10 kernel/exit.c:912 __x64_sys_exit_group+0x37/0x40 kernel/exit.c:912 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by passing back the link from __io_queue_async_work(), and then let the caller handle the queueing of the link. Take care to also punt the submission reference put to the caller, as we're holding the completion lock for the __io_queue_defer() case. Hence we need to mark the io_kiocb appropriately for that case. Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-10 23:55:22 +08:00
}
kfree(de);
} while (!list_empty(&ctx->defer_list));
}
static void io_flush_timeouts(struct io_ring_ctx *ctx)
{
while (!list_empty(&ctx->timeout_list)) {
struct io_kiocb *req = list_first_entry(&ctx->timeout_list,
struct io_kiocb, timeout.list);
if (io_is_timeout_noseq(req))
break;
if (req->timeout.target_seq != ctx->cached_cq_tail
- atomic_read(&ctx->cq_timeouts))
break;
list_del_init(&req->timeout.list);
io_kill_timeout(req);
}
}
static void io_commit_cqring(struct io_ring_ctx *ctx)
{
io_flush_timeouts(ctx);
__io_commit_cqring(ctx);
if (unlikely(!list_empty(&ctx->defer_list)))
__io_queue_deferred(ctx);
}
static inline bool io_sqring_full(struct io_ring_ctx *ctx)
{
struct io_rings *r = ctx->rings;
return READ_ONCE(r->sq.tail) - ctx->cached_sq_head == r->sq_ring_entries;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static struct io_uring_cqe *io_get_cqring(struct io_ring_ctx *ctx)
{
struct io_rings *rings = ctx->rings;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
unsigned tail;
tail = ctx->cached_cq_tail;
/*
* writes to the cq entry need to come after reading head; the
* control dependency is enough as we're using WRITE_ONCE to
* fill the cq entry
*/
if (tail - READ_ONCE(rings->cq.head) == rings->cq_ring_entries)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return NULL;
ctx->cached_cq_tail++;
return &rings->cqes[tail & ctx->cq_mask];
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static inline bool io_should_trigger_evfd(struct io_ring_ctx *ctx)
{
if (!ctx->cq_ev_fd)
return false;
if (READ_ONCE(ctx->rings->cq_flags) & IORING_CQ_EVENTFD_DISABLED)
return false;
if (!ctx->eventfd_async)
return true;
return io_wq_current_is_worker();
}
static void io_cqring_ev_posted(struct io_ring_ctx *ctx)
{
if (waitqueue_active(&ctx->wait))
wake_up(&ctx->wait);
if (ctx->sq_data && waitqueue_active(&ctx->sq_data->wait))
wake_up(&ctx->sq_data->wait);
if (io_should_trigger_evfd(ctx))
eventfd_signal(ctx->cq_ev_fd, 1);
}
static void io_cqring_mark_overflow(struct io_ring_ctx *ctx)
{
if (list_empty(&ctx->cq_overflow_list)) {
clear_bit(0, &ctx->sq_check_overflow);
clear_bit(0, &ctx->cq_check_overflow);
ctx->rings->sq_flags &= ~IORING_SQ_CQ_OVERFLOW;
}
}
/* Returns true if there are no backlogged entries after the flush */
static bool io_cqring_overflow_flush(struct io_ring_ctx *ctx, bool force,
struct task_struct *tsk,
struct files_struct *files)
{
struct io_rings *rings = ctx->rings;
struct io_kiocb *req, *tmp;
struct io_uring_cqe *cqe;
unsigned long flags;
LIST_HEAD(list);
if (!force) {
if ((ctx->cached_cq_tail - READ_ONCE(rings->cq.head) ==
rings->cq_ring_entries))
return false;
}
spin_lock_irqsave(&ctx->completion_lock, flags);
cqe = NULL;
list_for_each_entry_safe(req, tmp, &ctx->cq_overflow_list, compl.list) {
if (!io_match_task(req, tsk, files))
continue;
cqe = io_get_cqring(ctx);
if (!cqe && !force)
break;
list_move(&req->compl.list, &list);
if (cqe) {
WRITE_ONCE(cqe->user_data, req->user_data);
WRITE_ONCE(cqe->res, req->result);
WRITE_ONCE(cqe->flags, req->compl.cflags);
} else {
ctx->cached_cq_overflow++;
WRITE_ONCE(ctx->rings->cq_overflow,
ctx->cached_cq_overflow);
}
}
io_commit_cqring(ctx);
io_cqring_mark_overflow(ctx);
spin_unlock_irqrestore(&ctx->completion_lock, flags);
io_cqring_ev_posted(ctx);
while (!list_empty(&list)) {
req = list_first_entry(&list, struct io_kiocb, compl.list);
list_del(&req->compl.list);
io_put_req(req);
}
return cqe != NULL;
}
static void __io_cqring_fill_event(struct io_kiocb *req, long res, long cflags)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_ring_ctx *ctx = req->ctx;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
struct io_uring_cqe *cqe;
trace_io_uring_complete(ctx, req->user_data, res);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/*
* If we can't get a cq entry, userspace overflowed the
* submission (by quite a lot). Increment the overflow count in
* the ring.
*/
cqe = io_get_cqring(ctx);
if (likely(cqe)) {
WRITE_ONCE(cqe->user_data, req->user_data);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
WRITE_ONCE(cqe->res, res);
WRITE_ONCE(cqe->flags, cflags);
} else if (ctx->cq_overflow_flushed ||
atomic_read(&req->task->io_uring->in_idle)) {
/*
* If we're in ring overflow flush mode, or in task cancel mode,
* then we cannot store the request for later flushing, we need
* to drop it on the floor.
*/
ctx->cached_cq_overflow++;
WRITE_ONCE(ctx->rings->cq_overflow, ctx->cached_cq_overflow);
} else {
if (list_empty(&ctx->cq_overflow_list)) {
set_bit(0, &ctx->sq_check_overflow);
set_bit(0, &ctx->cq_check_overflow);
io_uring: export cq overflow status to userspace For those applications which are not willing to use io_uring_enter() to reap and handle cqes, they may completely rely on liburing's io_uring_peek_cqe(), but if cq ring has overflowed, currently because io_uring_peek_cqe() is not aware of this overflow, it won't enter kernel to flush cqes, below test program can reveal this bug: static void test_cq_overflow(struct io_uring *ring) { struct io_uring_cqe *cqe; struct io_uring_sqe *sqe; int issued = 0; int ret = 0; do { sqe = io_uring_get_sqe(ring); if (!sqe) { fprintf(stderr, "get sqe failed\n"); break;; } ret = io_uring_submit(ring); if (ret <= 0) { if (ret != -EBUSY) fprintf(stderr, "sqe submit failed: %d\n", ret); break; } issued++; } while (ret > 0); assert(ret == -EBUSY); printf("issued requests: %d\n", issued); while (issued) { ret = io_uring_peek_cqe(ring, &cqe); if (ret) { if (ret != -EAGAIN) { fprintf(stderr, "peek completion failed: %s\n", strerror(ret)); break; } printf("left requets: %d\n", issued); continue; } io_uring_cqe_seen(ring, cqe); issued--; printf("left requets: %d\n", issued); } } int main(int argc, char *argv[]) { int ret; struct io_uring ring; ret = io_uring_queue_init(16, &ring, 0); if (ret) { fprintf(stderr, "ring setup failed: %d\n", ret); return 1; } test_cq_overflow(&ring); return 0; } To fix this issue, export cq overflow status to userspace by adding new IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09 09:15:29 +08:00
ctx->rings->sq_flags |= IORING_SQ_CQ_OVERFLOW;
}
io_clean_op(req);
req->result = res;
req->compl.cflags = cflags;
refcount_inc(&req->refs);
list_add_tail(&req->compl.list, &ctx->cq_overflow_list);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
}
static void io_cqring_fill_event(struct io_kiocb *req, long res)
{
__io_cqring_fill_event(req, res, 0);
}
static void io_cqring_add_event(struct io_kiocb *req, long res, long cflags)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_ring_ctx *ctx = req->ctx;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
unsigned long flags;
spin_lock_irqsave(&ctx->completion_lock, flags);
__io_cqring_fill_event(req, res, cflags);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
io_commit_cqring(ctx);
spin_unlock_irqrestore(&ctx->completion_lock, flags);
io_uring: fix poll races This is a straight port of Al's fix for the aio poll implementation, since the io_uring version is heavily based on that. The below description is almost straight from that patch, just modified to fit the io_uring situation. io_poll() has to cope with several unpleasant problems: * requests that might stay around indefinitely need to be made visible for io_cancel(2); that must not be done to a request already completed, though. * in cases when ->poll() has placed us on a waitqueue, wakeup might have happened (and request completed) before ->poll() returns. * worse, in some early wakeup cases request might end up re-added into the queue later - we can't treat "woken up and currently not in the queue" as "it's not going to stick around indefinitely" * ... moreover, ->poll() might have decided not to put it on any queues to start with, and that needs to be distinguished from the previous case * ->poll() might have tried to put us on more than one queue. Only the first will succeed for io poll, so we might end up missing wakeups. OTOH, we might very well notice that only after the wakeup hits and request gets completed (all before ->poll() gets around to the second poll_wait()). In that case it's too late to decide that we have an error. req->woken was an attempt to deal with that. Unfortunately, it was broken. What we need to keep track of is not that wakeup has happened - the thing might come back after that. It's that async reference is already gone and won't come back, so we can't (and needn't) put the request on the list of cancellables. The easiest case is "request hadn't been put on any waitqueues"; we can tell by seeing NULL apt.head, and in that case there won't be anything async. We should either complete the request ourselves (if vfs_poll() reports anything of interest) or return an error. In all other cases we get exclusion with wakeups by grabbing the queue lock. If request is currently on queue and we have something interesting from vfs_poll(), we can steal it and complete the request ourselves. If it's on queue and vfs_poll() has not reported anything interesting, we either put it on the cancellable list, or, if we know that it hadn't been put on all queues ->poll() wanted it on, we steal it and return an error. If it's _not_ on queue, it's either been already dealt with (in which case we do nothing), or there's io_poll_complete_work() about to be executed. In that case we either put it on the cancellable list, or, if we know it hadn't been put on all queues ->poll() wanted it on, simulate what cancel would've done. Fixes: 221c5eb23382 ("io_uring: add support for IORING_OP_POLL") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-13 05:48:16 +08:00
io_cqring_ev_posted(ctx);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static void io_submit_flush_completions(struct io_comp_state *cs)
{
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
struct io_ring_ctx *ctx = cs->ctx;
spin_lock_irq(&ctx->completion_lock);
while (!list_empty(&cs->list)) {
struct io_kiocb *req;
req = list_first_entry(&cs->list, struct io_kiocb, compl.list);
list_del(&req->compl.list);
__io_cqring_fill_event(req, req->result, req->compl.cflags);
/*
* io_free_req() doesn't care about completion_lock unless one
* of these flags is set. REQ_F_WORK_INITIALIZED is in the list
* because of a potential deadlock with req->work.fs->lock
*/
if (req->flags & (REQ_F_FAIL_LINK|REQ_F_LINK_TIMEOUT
|REQ_F_WORK_INITIALIZED)) {
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
spin_unlock_irq(&ctx->completion_lock);
io_put_req(req);
spin_lock_irq(&ctx->completion_lock);
} else {
io_put_req(req);
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
}
}
io_commit_cqring(ctx);
spin_unlock_irq(&ctx->completion_lock);
io_cqring_ev_posted(ctx);
cs->nr = 0;
}
static void __io_req_complete(struct io_kiocb *req, long res, unsigned cflags,
struct io_comp_state *cs)
{
if (!cs) {
io_cqring_add_event(req, res, cflags);
io_put_req(req);
} else {
io_clean_op(req);
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
req->result = res;
req->compl.cflags = cflags;
list_add_tail(&req->compl.list, &cs->list);
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
if (++cs->nr >= 32)
io_submit_flush_completions(cs);
}
}
static void io_req_complete(struct io_kiocb *req, long res)
{
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, res, 0, NULL);
}
static inline bool io_is_fallback_req(struct io_kiocb *req)
{
return req == (struct io_kiocb *)
((unsigned long) req->ctx->fallback_req & ~1UL);
}
static struct io_kiocb *io_get_fallback_req(struct io_ring_ctx *ctx)
{
struct io_kiocb *req;
req = ctx->fallback_req;
if (!test_and_set_bit_lock(0, (unsigned long *) &ctx->fallback_req))
return req;
return NULL;
}
static struct io_kiocb *io_alloc_req(struct io_ring_ctx *ctx,
struct io_submit_state *state)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
if (!state->free_reqs) {
gfp_t gfp = GFP_KERNEL | __GFP_NOWARN;
size_t sz;
int ret;
sz = min_t(size_t, state->ios_left, ARRAY_SIZE(state->reqs));
ret = kmem_cache_alloc_bulk(req_cachep, gfp, sz, state->reqs);
/*
* Bulk alloc is all-or-nothing. If we fail to get a batch,
* retry single alloc to be on the safe side.
*/
if (unlikely(ret <= 0)) {
state->reqs[0] = kmem_cache_alloc(req_cachep, gfp);
if (!state->reqs[0])
goto fallback;
ret = 1;
}
state->free_reqs = ret;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
state->free_reqs--;
return state->reqs[state->free_reqs];
fallback:
return io_get_fallback_req(ctx);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static inline void io_put_file(struct io_kiocb *req, struct file *file,
bool fixed)
{
if (!fixed)
fput(file);
}
static void io_dismantle_req(struct io_kiocb *req)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
io_clean_op(req);
if (req->async_data)
kfree(req->async_data);
if (req->file)
io_put_file(req, req->file, (req->flags & REQ_F_FIXED_FILE));
if (req->fixed_file_refs)
percpu_ref_put(req->fixed_file_refs);
io_req_clean_work(req);
}
static void __io_free_req(struct io_kiocb *req)
{
struct io_uring_task *tctx = req->task->io_uring;
struct io_ring_ctx *ctx = req->ctx;
io_dismantle_req(req);
percpu_counter_dec(&tctx->inflight);
if (atomic_read(&tctx->in_idle))
wake_up(&tctx->wait);
put_task_struct(req->task);
if (likely(!io_is_fallback_req(req)))
kmem_cache_free(req_cachep, req);
else
clear_bit_unlock(0, (unsigned long *) &ctx->fallback_req);
percpu_ref_put(&ctx->refs);
}
static inline void io_remove_next_linked(struct io_kiocb *req)
{
struct io_kiocb *nxt = req->link;
req->link = nxt->link;
nxt->link = NULL;
}
static void io_kill_linked_timeout(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
struct io_kiocb *link;
bool cancelled = false;
unsigned long flags;
spin_lock_irqsave(&ctx->completion_lock, flags);
link = req->link;
/*
* Can happen if a linked timeout fired and link had been like
* req -> link t-out -> link t-out [-> ...]
*/
if (link && (link->flags & REQ_F_LTIMEOUT_ACTIVE)) {
struct io_timeout_data *io = link->async_data;
int ret;
io_remove_next_linked(req);
link->timeout.head = NULL;
ret = hrtimer_try_to_cancel(&io->timer);
if (ret != -1) {
io_cqring_fill_event(link, -ECANCELED);
io_commit_cqring(ctx);
cancelled = true;
}
}
req->flags &= ~REQ_F_LINK_TIMEOUT;
spin_unlock_irqrestore(&ctx->completion_lock, flags);
if (cancelled) {
io_cqring_ev_posted(ctx);
io_put_req(link);
}
}
static void io_fail_links(struct io_kiocb *req)
{
struct io_kiocb *link, *nxt;
struct io_ring_ctx *ctx = req->ctx;
unsigned long flags;
spin_lock_irqsave(&ctx->completion_lock, flags);
link = req->link;
req->link = NULL;
while (link) {
nxt = link->link;
link->link = NULL;
trace_io_uring_fail_link(req, link);
io_cqring_fill_event(link, -ECANCELED);
/*
* It's ok to free under spinlock as they're not linked anymore,
* but avoid REQ_F_WORK_INITIALIZED because it may deadlock on
* work.fs->lock.
*/
if (link->flags & REQ_F_WORK_INITIALIZED)
io_put_req_deferred(link, 2);
else
io_double_put_req(link);
link = nxt;
}
io_commit_cqring(ctx);
spin_unlock_irqrestore(&ctx->completion_lock, flags);
io_cqring_ev_posted(ctx);
}
static struct io_kiocb *__io_req_find_next(struct io_kiocb *req)
{
if (req->flags & REQ_F_LINK_TIMEOUT)
io_kill_linked_timeout(req);
/*
* If LINK is set, we have dependent requests in this chain. If we
* didn't fail this request, queue the first one up, moving any other
* dependencies to the next request. In case of failure, fail the rest
* of the chain.
*/
if (likely(!(req->flags & REQ_F_FAIL_LINK))) {
struct io_kiocb *nxt = req->link;
req->link = NULL;
return nxt;
}
io_fail_links(req);
return NULL;
}
static inline struct io_kiocb *io_req_find_next(struct io_kiocb *req)
{
if (likely(!(req->link) && !(req->flags & REQ_F_LINK_TIMEOUT)))
return NULL;
return __io_req_find_next(req);
}
static int io_req_task_work_add(struct io_kiocb *req)
{
struct task_struct *tsk = req->task;
struct io_ring_ctx *ctx = req->ctx;
enum task_work_notify_mode notify;
int ret;
if (tsk->flags & PF_EXITING)
return -ESRCH;
/*
* SQPOLL kernel thread doesn't need notification, just a wakeup. For
* all other cases, use TWA_SIGNAL unconditionally to ensure we're
* processing task_work. There's no reliable way to tell if TWA_RESUME
* will do the job.
*/
notify = TWA_NONE;
if (!(ctx->flags & IORING_SETUP_SQPOLL))
notify = TWA_SIGNAL;
ret = task_work_add(tsk, &req->task_work, notify);
if (!ret)
wake_up_process(tsk);
return ret;
}
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
static void __io_req_task_cancel(struct io_kiocb *req, int error)
{
struct io_ring_ctx *ctx = req->ctx;
spin_lock_irq(&ctx->completion_lock);
io_cqring_fill_event(req, error);
io_commit_cqring(ctx);
spin_unlock_irq(&ctx->completion_lock);
io_cqring_ev_posted(ctx);
req_set_fail_links(req);
io_double_put_req(req);
}
static void io_req_task_cancel(struct callback_head *cb)
{
struct io_kiocb *req = container_of(cb, struct io_kiocb, task_work);
struct io_ring_ctx *ctx = req->ctx;
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
__io_req_task_cancel(req, -ECANCELED);
percpu_ref_put(&ctx->refs);
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
}
static void __io_req_task_submit(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
if (!__io_sq_thread_acquire_mm(ctx) &&
!__io_sq_thread_acquire_files(ctx)) {
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
mutex_lock(&ctx->uring_lock);
__io_queue_sqe(req, NULL);
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
mutex_unlock(&ctx->uring_lock);
} else {
__io_req_task_cancel(req, -EFAULT);
}
}
static void io_req_task_submit(struct callback_head *cb)
{
struct io_kiocb *req = container_of(cb, struct io_kiocb, task_work);
struct io_ring_ctx *ctx = req->ctx;
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
__io_req_task_submit(req);
percpu_ref_put(&ctx->refs);
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
}
static void io_req_task_queue(struct io_kiocb *req)
{
int ret;
init_task_work(&req->task_work, io_req_task_submit);
percpu_ref_get(&req->ctx->refs);
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
ret = io_req_task_work_add(req);
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
if (unlikely(ret)) {
struct task_struct *tsk;
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
init_task_work(&req->task_work, io_req_task_cancel);
tsk = io_wq_get_task(req->ctx->io_wq);
task_work_add(tsk, &req->task_work, TWA_NONE);
wake_up_process(tsk);
io_uring: use task_work for links if possible Currently links are always done in an async fashion, unless we catch them inline after we successfully complete a request without having to resort to blocking. This isn't necessarily the most efficient approach, it'd be more ideal if we could just use the task_work handling for this. Outside of saving an async jump, we can also do less prep work for these kinds of requests. Running dependent links from the task_work handler yields some nice performance benefits. As an example, examples/link-cp from the liburing repository uses read+write links to implement a copy operation. Without this patch, the a cache fold 4G file read from a VM runs in about 3 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.986s user 0m0.051s sys 0m2.843s and a subsequent cache hot run looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.898s user 0m0.069s sys 0m0.797s With this patch in place, the cold case takes about 2.4 seconds: $ time examples/link-cp /data/file /dev/null real 0m2.400s user 0m0.020s sys 0m2.366s and the cache hot case looks like this: $ time examples/link-cp /data/file /dev/null real 0m0.676s user 0m0.010s sys 0m0.665s As expected, the (mostly) cache hot case yields the biggest improvement, running about 25% faster with this change, while the cache cold case yields about a 20% increase in performance. Outside of the performance increase, we're using less CPU as well, as we're not using the async offload threads at all for this anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-26 05:39:59 +08:00
}
}
static inline void io_queue_next(struct io_kiocb *req)
{
struct io_kiocb *nxt = io_req_find_next(req);
if (nxt)
io_req_task_queue(nxt);
}
static void io_free_req(struct io_kiocb *req)
{
io_queue_next(req);
__io_free_req(req);
}
struct req_batch {
void *reqs[IO_IOPOLL_BATCH];
int to_free;
struct task_struct *task;
int task_refs;
};
static inline void io_init_req_batch(struct req_batch *rb)
{
rb->to_free = 0;
rb->task_refs = 0;
rb->task = NULL;
}
static void __io_req_free_batch_flush(struct io_ring_ctx *ctx,
struct req_batch *rb)
{
kmem_cache_free_bulk(req_cachep, rb->to_free, rb->reqs);
percpu_ref_put_many(&ctx->refs, rb->to_free);
rb->to_free = 0;
}
static void io_req_free_batch_finish(struct io_ring_ctx *ctx,
struct req_batch *rb)
{
if (rb->to_free)
__io_req_free_batch_flush(ctx, rb);
if (rb->task) {
struct io_uring_task *tctx = rb->task->io_uring;
percpu_counter_sub(&tctx->inflight, rb->task_refs);
put_task_struct_many(rb->task, rb->task_refs);
rb->task = NULL;
}
}
static void io_req_free_batch(struct req_batch *rb, struct io_kiocb *req)
{
if (unlikely(io_is_fallback_req(req))) {
io_free_req(req);
return;
}
io_queue_next(req);
if (req->task != rb->task) {
if (rb->task) {
struct io_uring_task *tctx = rb->task->io_uring;
percpu_counter_sub(&tctx->inflight, rb->task_refs);
put_task_struct_many(rb->task, rb->task_refs);
}
rb->task = req->task;
rb->task_refs = 0;
}
rb->task_refs++;
io_dismantle_req(req);
rb->reqs[rb->to_free++] = req;
if (unlikely(rb->to_free == ARRAY_SIZE(rb->reqs)))
__io_req_free_batch_flush(req->ctx, rb);
}
/*
* Drop reference to request, return next in chain (if there is one) if this
* was the last reference to this request.
*/
static struct io_kiocb *io_put_req_find_next(struct io_kiocb *req)
{
struct io_kiocb *nxt = NULL;
if (refcount_dec_and_test(&req->refs)) {
nxt = io_req_find_next(req);
__io_free_req(req);
}
return nxt;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static void io_put_req(struct io_kiocb *req)
{
if (refcount_dec_and_test(&req->refs))
io_free_req(req);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static void io_put_req_deferred_cb(struct callback_head *cb)
{
struct io_kiocb *req = container_of(cb, struct io_kiocb, task_work);
io_free_req(req);
}
static void io_free_req_deferred(struct io_kiocb *req)
{
int ret;
init_task_work(&req->task_work, io_put_req_deferred_cb);
ret = io_req_task_work_add(req);
if (unlikely(ret)) {
struct task_struct *tsk;
tsk = io_wq_get_task(req->ctx->io_wq);
task_work_add(tsk, &req->task_work, TWA_NONE);
wake_up_process(tsk);
}
}
static inline void io_put_req_deferred(struct io_kiocb *req, int refs)
{
if (refcount_sub_and_test(refs, &req->refs))
io_free_req_deferred(req);
}
static struct io_wq_work *io_steal_work(struct io_kiocb *req)
{
struct io_kiocb *nxt;
/*
* A ref is owned by io-wq in which context we're. So, if that's the
* last one, it's safe to steal next work. False negatives are Ok,
* it just will be re-punted async in io_put_work()
*/
if (refcount_read(&req->refs) != 1)
return NULL;
nxt = io_req_find_next(req);
return nxt ? &nxt->work : NULL;
}
static void io_double_put_req(struct io_kiocb *req)
{
/* drop both submit and complete references */
if (refcount_sub_and_test(2, &req->refs))
io_free_req(req);
}
static unsigned io_cqring_events(struct io_ring_ctx *ctx, bool noflush)
{
struct io_rings *rings = ctx->rings;
if (test_bit(0, &ctx->cq_check_overflow)) {
/*
* noflush == true is from the waitqueue handler, just ensure
* we wake up the task, and the next invocation will flush the
* entries. We cannot safely to it from here.
*/
if (noflush)
return -1U;
io_cqring_overflow_flush(ctx, false, NULL, NULL);
}
/* See comment at the top of this file */
smp_rmb();
return ctx->cached_cq_tail - READ_ONCE(rings->cq.head);
}
static inline unsigned int io_sqring_entries(struct io_ring_ctx *ctx)
{
struct io_rings *rings = ctx->rings;
/* make sure SQ entry isn't read before tail */
return smp_load_acquire(&rings->sq.tail) - ctx->cached_sq_head;
}
static unsigned int io_put_kbuf(struct io_kiocb *req, struct io_buffer *kbuf)
{
unsigned int cflags;
cflags = kbuf->bid << IORING_CQE_BUFFER_SHIFT;
cflags |= IORING_CQE_F_BUFFER;
req->flags &= ~REQ_F_BUFFER_SELECTED;
kfree(kbuf);
return cflags;
}
static inline unsigned int io_put_rw_kbuf(struct io_kiocb *req)
{
struct io_buffer *kbuf;
kbuf = (struct io_buffer *) (unsigned long) req->rw.addr;
return io_put_kbuf(req, kbuf);
}
static inline bool io_run_task_work(void)
{
/*
* Not safe to run on exiting task, and the task_work handling will
* not add work to such a task.
*/
if (unlikely(current->flags & PF_EXITING))
return false;
if (current->task_works) {
__set_current_state(TASK_RUNNING);
task_work_run();
return true;
}
return false;
}
static void io_iopoll_queue(struct list_head *again)
{
struct io_kiocb *req;
do {
req = list_first_entry(again, struct io_kiocb, inflight_entry);
list_del(&req->inflight_entry);
__io_complete_rw(req, -EAGAIN, 0, NULL);
} while (!list_empty(again));
}
/*
* Find and free completed poll iocbs
*/
static void io_iopoll_complete(struct io_ring_ctx *ctx, unsigned int *nr_events,
struct list_head *done)
{
struct req_batch rb;
struct io_kiocb *req;
LIST_HEAD(again);
/* order with ->result store in io_complete_rw_iopoll() */
smp_rmb();
io_init_req_batch(&rb);
while (!list_empty(done)) {
int cflags = 0;
req = list_first_entry(done, struct io_kiocb, inflight_entry);
if (READ_ONCE(req->result) == -EAGAIN) {
req->result = 0;
req->iopoll_completed = 0;
list_move_tail(&req->inflight_entry, &again);
continue;
}
list_del(&req->inflight_entry);
if (req->flags & REQ_F_BUFFER_SELECTED)
cflags = io_put_rw_kbuf(req);
__io_cqring_fill_event(req, req->result, cflags);
(*nr_events)++;
if (refcount_dec_and_test(&req->refs))
io_req_free_batch(&rb, req);
}
io_commit_cqring(ctx);
io_uring: io_uring_enter(2) don't poll while SETUP_IOPOLL|SETUP_SQPOLL enabled When SETUP_IOPOLL and SETUP_SQPOLL are both enabled, applications don't need to do io completion events polling again, they can rely on io_sq_thread to do polling work, which can reduce cpu usage and uring_lock contention. I modify fio io_uring engine codes a bit to evaluate the performance: static int fio_ioring_getevents(struct thread_data *td, unsigned int min, continue; } - if (!o->sqpoll_thread) { + if (o->sqpoll_thread && o->hipri) { r = io_uring_enter(ld, 0, actual_min, IORING_ENTER_GETEVENTS); if (r < 0) { and use "fio -name=fiotest -filename=/dev/nvme0n1 -iodepth=$depth -thread -rw=read -ioengine=io_uring -hipri=1 -sqthread_poll=1 -direct=1 -bs=4k -size=10G -numjobs=1 -time_based -runtime=120" original codes -------------------------------------------------------------------- iodepth | 4 | 8 | 16 | 32 | 64 bw | 1133MB/s | 1519MB/s | 2090MB/s | 2710MB/s | 3012MB/s fio cpu usage | 100% | 100% | 100% | 100% | 100% -------------------------------------------------------------------- with patch -------------------------------------------------------------------- iodepth | 4 | 8 | 16 | 32 | 64 bw | 1196MB/s | 1721MB/s | 2351MB/s | 2977MB/s | 3357MB/s fio cpu usage | 63.8% | 74.4%% | 81.1% | 83.7% | 82.4% -------------------------------------------------------------------- bw improve | 5.5% | 13.2% | 12.3% | 9.8% | 11.5% -------------------------------------------------------------------- From above test results, we can see that bw has above 5.5%~13% improvement, and fio process's cpu usage also drops much. Note this won't improve io_sq_thread's cpu usage when SETUP_IOPOLL|SETUP_SQPOLL are both enabled, in this case, io_sq_thread always has 100% cpu usage. I think this patch will be friendly to applications which will often use io_uring_wait_cqe() or similar from liburing. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-11 09:26:09 +08:00
if (ctx->flags & IORING_SETUP_SQPOLL)
io_cqring_ev_posted(ctx);
io_req_free_batch_finish(ctx, &rb);
if (!list_empty(&again))
io_iopoll_queue(&again);
}
static int io_do_iopoll(struct io_ring_ctx *ctx, unsigned int *nr_events,
long min)
{
struct io_kiocb *req, *tmp;
LIST_HEAD(done);
bool spin;
int ret;
/*
* Only spin for completions if we don't have multiple devices hanging
* off our complete list, and we're under the requested amount.
*/
spin = !ctx->poll_multi_file && *nr_events < min;
ret = 0;
list_for_each_entry_safe(req, tmp, &ctx->iopoll_list, inflight_entry) {
struct kiocb *kiocb = &req->rw.kiocb;
/*
* Move completed and retryable entries to our local lists.
* If we find a request that requires polling, break out
* and complete those lists first, if we have entries there.
*/
if (READ_ONCE(req->iopoll_completed)) {
list_move_tail(&req->inflight_entry, &done);
continue;
}
if (!list_empty(&done))
break;
ret = kiocb->ki_filp->f_op->iopoll(kiocb, spin);
if (ret < 0)
break;
/* iopoll may have completed current req */
if (READ_ONCE(req->iopoll_completed))
list_move_tail(&req->inflight_entry, &done);
if (ret && spin)
spin = false;
ret = 0;
}
if (!list_empty(&done))
io_iopoll_complete(ctx, nr_events, &done);
return ret;
}
/*
* Poll for a minimum of 'min' events. Note that if min == 0 we consider that a
* non-spinning poll check - we'll still enter the driver poll loop, but only
* as a non-spinning completion check.
*/
static int io_iopoll_getevents(struct io_ring_ctx *ctx, unsigned int *nr_events,
long min)
{
while (!list_empty(&ctx->iopoll_list) && !need_resched()) {
int ret;
ret = io_do_iopoll(ctx, nr_events, min);
if (ret < 0)
return ret;
if (*nr_events >= min)
return 0;
}
return 1;
}
/*
* We can't just wait for polled events to come to us, we have to actively
* find and complete them.
*/
static void io_iopoll_try_reap_events(struct io_ring_ctx *ctx)
{
if (!(ctx->flags & IORING_SETUP_IOPOLL))
return;
mutex_lock(&ctx->uring_lock);
while (!list_empty(&ctx->iopoll_list)) {
unsigned int nr_events = 0;
io_do_iopoll(ctx, &nr_events, 0);
/* let it sleep and repeat later if can't complete a request */
if (nr_events == 0)
break;
/*
* Ensure we allow local-to-the-cpu processing to take place,
* in this case we need to ensure that we reap all events.
* Also let task_work, etc. to progress by releasing the mutex
*/
if (need_resched()) {
mutex_unlock(&ctx->uring_lock);
cond_resched();
mutex_lock(&ctx->uring_lock);
}
}
mutex_unlock(&ctx->uring_lock);
}
static int io_iopoll_check(struct io_ring_ctx *ctx, long min)
{
unsigned int nr_events = 0;
int iters = 0, ret = 0;
/*
* We disallow the app entering submit/complete with polling, but we
* still need to lock the ring to prevent racing with polled issue
* that got punted to a workqueue.
*/
mutex_lock(&ctx->uring_lock);
do {
/*
* Don't enter poll loop if we already have events pending.
* If we do, we can potentially be spinning for commands that
* already triggered a CQE (eg in error).
*/
if (io_cqring_events(ctx, false))
break;
/*
* If a submit got punted to a workqueue, we can have the
* application entering polling for a command before it gets
* issued. That app will hold the uring_lock for the duration
* of the poll right here, so we need to take a breather every
* now and then to ensure that the issue has a chance to add
* the poll to the issued list. Otherwise we can spin here
* forever, while the workqueue is stuck trying to acquire the
* very same mutex.
*/
if (!(++iters & 7)) {
mutex_unlock(&ctx->uring_lock);
io_run_task_work();
mutex_lock(&ctx->uring_lock);
}
ret = io_iopoll_getevents(ctx, &nr_events, min);
if (ret <= 0)
break;
ret = 0;
} while (min && !nr_events && !need_resched());
mutex_unlock(&ctx->uring_lock);
return ret;
}
static void kiocb_end_write(struct io_kiocb *req)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
/*
* Tell lockdep we inherited freeze protection from submission
* thread.
*/
if (req->flags & REQ_F_ISREG) {
struct inode *inode = file_inode(req->file);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
__sb_writers_acquired(inode->i_sb, SB_FREEZE_WRITE);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
file_end_write(req->file);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static void io_complete_rw_common(struct kiocb *kiocb, long res,
struct io_comp_state *cs)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_kiocb *req = container_of(kiocb, struct io_kiocb, rw.kiocb);
int cflags = 0;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
if (kiocb->ki_flags & IOCB_WRITE)
kiocb_end_write(req);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
if (res != req->result)
req_set_fail_links(req);
if (req->flags & REQ_F_BUFFER_SELECTED)
cflags = io_put_rw_kbuf(req);
__io_req_complete(req, res, cflags, cs);
}
#ifdef CONFIG_BLOCK
static bool io_resubmit_prep(struct io_kiocb *req, int error)
{
struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs;
ssize_t ret = -ECANCELED;
struct iov_iter iter;
int rw;
if (error) {
ret = error;
goto end_req;
}
switch (req->opcode) {
case IORING_OP_READV:
case IORING_OP_READ_FIXED:
case IORING_OP_READ:
rw = READ;
break;
case IORING_OP_WRITEV:
case IORING_OP_WRITE_FIXED:
case IORING_OP_WRITE:
rw = WRITE;
break;
default:
printk_once(KERN_WARNING "io_uring: bad opcode in resubmit %d\n",
req->opcode);
goto end_req;
}
if (!req->async_data) {
ret = io_import_iovec(rw, req, &iovec, &iter, false);
if (ret < 0)
goto end_req;
ret = io_setup_async_rw(req, iovec, inline_vecs, &iter, false);
if (!ret)
return true;
kfree(iovec);
} else {
return true;
}
end_req:
req_set_fail_links(req);
return false;
}
#endif
static bool io_rw_reissue(struct io_kiocb *req, long res)
{
#ifdef CONFIG_BLOCK
umode_t mode = file_inode(req->file)->i_mode;
int ret;
if (!S_ISBLK(mode) && !S_ISREG(mode))
return false;
if ((res != -EAGAIN && res != -EOPNOTSUPP) || io_wq_current_is_worker())
return false;
ret = io_sq_thread_acquire_mm_files(req->ctx, req);
if (io_resubmit_prep(req, ret)) {
refcount_inc(&req->refs);
io_queue_async_work(req);
return true;
}
#endif
return false;
}
static void __io_complete_rw(struct io_kiocb *req, long res, long res2,
struct io_comp_state *cs)
{
if (!io_rw_reissue(req, res))
io_complete_rw_common(&req->rw.kiocb, res, cs);
}
static void io_complete_rw(struct kiocb *kiocb, long res, long res2)
{
struct io_kiocb *req = container_of(kiocb, struct io_kiocb, rw.kiocb);
__io_complete_rw(req, res, res2, NULL);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static void io_complete_rw_iopoll(struct kiocb *kiocb, long res, long res2)
{
struct io_kiocb *req = container_of(kiocb, struct io_kiocb, rw.kiocb);
if (kiocb->ki_flags & IOCB_WRITE)
kiocb_end_write(req);
if (res != -EAGAIN && res != req->result)
req_set_fail_links(req);
WRITE_ONCE(req->result, res);
/* order with io_poll_complete() checking ->result */
smp_wmb();
WRITE_ONCE(req->iopoll_completed, 1);
}
/*
* After the iocb has been issued, it's safe to be found on the poll list.
* Adding the kiocb to the list AFTER submission ensures that we don't
* find it from a io_iopoll_getevents() thread before the issuer is done
* accessing the kiocb cookie.
*/
static void io_iopoll_req_issued(struct io_kiocb *req, bool in_async)
{
struct io_ring_ctx *ctx = req->ctx;
/*
* Track whether we have multiple files in our lists. This will impact
* how we do polling eventually, not spinning if we're on potentially
* different devices.
*/
if (list_empty(&ctx->iopoll_list)) {
ctx->poll_multi_file = false;
} else if (!ctx->poll_multi_file) {
struct io_kiocb *list_req;
list_req = list_first_entry(&ctx->iopoll_list, struct io_kiocb,
inflight_entry);
if (list_req->file != req->file)
ctx->poll_multi_file = true;
}
/*
* For fast devices, IO may have already completed. If it has, add
* it to the front so we find it first.
*/
if (READ_ONCE(req->iopoll_completed))
list_add(&req->inflight_entry, &ctx->iopoll_list);
else
list_add_tail(&req->inflight_entry, &ctx->iopoll_list);
io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL After making ext4 support iopoll method: let ext4_file_operations's iopoll method be iomap_dio_iopoll(), we found fio can easily hang in fio_ioring_getevents() with below fio job: rm -f testfile; sync; sudo fio -name=fiotest -filename=testfile -iodepth=128 -thread -rw=write -ioengine=io_uring -hipri=1 -sqthread_poll=1 -direct=1 -bs=4k -size=10G -numjobs=8 -runtime=2000 -group_reporting with IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL enabled. There are two issues that results in this hang, one reason is that when IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL are enabled, fio does not use io_uring_enter to get completed events, it relies on kernel io_sq_thread to poll for completed events. Another reason is that there is a race: when io_submit_sqes() in io_sq_thread() submits a batch of sqes, variable 'inflight' will record the number of submitted reqs, then io_sq_thread will poll for reqs which have been added to poll_list. But note, if some previous reqs have been punted to io worker, these reqs will won't be in poll_list timely. io_sq_thread() will only poll for a part of previous submitted reqs, and then find poll_list is empty, reset variable 'inflight' to be zero. If app just waits these deferred reqs and does not wake up io_sq_thread again, then hang happens. For app that entirely relies on io_sq_thread to poll completed requests, let io_iopoll_req_issued() wake up io_sq_thread properly when adding new element to poll_list, and when io_sq_thread prepares to sleep, check whether poll_list is empty again, if not empty, continue to poll. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25 22:12:08 +08:00
/*
* If IORING_SETUP_SQPOLL is enabled, sqes are either handled in sq thread
* task context or in io worker task context. If current task context is
* sq thread, we don't need to check whether should wake up sq thread.
*/
if (in_async && (ctx->flags & IORING_SETUP_SQPOLL) &&
wq_has_sleeper(&ctx->sq_data->wait))
wake_up(&ctx->sq_data->wait);
}
static inline void __io_state_file_put(struct io_submit_state *state)
{
fput_many(state->file, state->file_refs);
state->file_refs = 0;
}
static inline void io_state_file_put(struct io_submit_state *state)
{
if (state->file_refs)
__io_state_file_put(state);
}
/*
* Get as many references to a file as we have IOs left in this submission,
* assuming most submissions are for one file, or at least that each file
* has more than one submission.
*/
static struct file *__io_file_get(struct io_submit_state *state, int fd)
{
if (!state)
return fget(fd);
if (state->file_refs) {
if (state->fd == fd) {
state->file_refs--;
return state->file;
}
__io_state_file_put(state);
}
state->file = fget_many(fd, state->ios_left);
if (unlikely(!state->file))
return NULL;
state->fd = fd;
state->file_refs = state->ios_left - 1;
return state->file;
}
static bool io_bdev_nowait(struct block_device *bdev)
{
return !bdev || blk_queue_nowait(bdev_get_queue(bdev));
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/*
* If we tracked the file through the SCM inflight mechanism, we could support
* any file. For now, just ensure that anything potentially problematic is done
* inline.
*/
static bool io_file_supports_async(struct file *file, int rw)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
umode_t mode = file_inode(file)->i_mode;
if (S_ISBLK(mode)) {
if (IS_ENABLED(CONFIG_BLOCK) &&
io_bdev_nowait(I_BDEV(file->f_mapping->host)))
return true;
return false;
}
if (S_ISCHR(mode) || S_ISSOCK(mode))
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return true;
if (S_ISREG(mode)) {
if (IS_ENABLED(CONFIG_BLOCK) &&
io_bdev_nowait(file->f_inode->i_sb->s_bdev) &&
file->f_op != &io_uring_fops)
return true;
return false;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/* any ->read/write should understand O_NONBLOCK */
if (file->f_flags & O_NONBLOCK)
return true;
if (!(file->f_mode & FMODE_NOWAIT))
return false;
if (rw == READ)
return file->f_op->read_iter != NULL;
return file->f_op->write_iter != NULL;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static int io_prep_rw(struct io_kiocb *req, const struct io_uring_sqe *sqe)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_ring_ctx *ctx = req->ctx;
struct kiocb *kiocb = &req->rw.kiocb;
unsigned ioprio;
int ret;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
if (S_ISREG(file_inode(req->file)->i_mode))
req->flags |= REQ_F_ISREG;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
kiocb->ki_pos = READ_ONCE(sqe->off);
if (kiocb->ki_pos == -1 && !(req->file->f_mode & FMODE_STREAM)) {
req->flags |= REQ_F_CUR_POS;
kiocb->ki_pos = req->file->f_pos;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
kiocb->ki_hint = ki_hint_validate(file_write_hint(kiocb->ki_filp));
kiocb->ki_flags = iocb_flags(kiocb->ki_filp);
ret = kiocb_set_rw_flags(kiocb, READ_ONCE(sqe->rw_flags));
if (unlikely(ret))
return ret;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
ioprio = READ_ONCE(sqe->ioprio);
if (ioprio) {
ret = ioprio_check_cap(ioprio);
if (ret)
return ret;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
kiocb->ki_ioprio = ioprio;
} else
kiocb->ki_ioprio = get_current_ioprio();
/* don't allow async punt if RWF_NOWAIT was requested */
if (kiocb->ki_flags & IOCB_NOWAIT)
req->flags |= REQ_F_NOWAIT;
if (ctx->flags & IORING_SETUP_IOPOLL) {
if (!(kiocb->ki_flags & IOCB_DIRECT) ||
!kiocb->ki_filp->f_op->iopoll)
return -EOPNOTSUPP;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
kiocb->ki_flags |= IOCB_HIPRI;
kiocb->ki_complete = io_complete_rw_iopoll;
req->iopoll_completed = 0;
} else {
if (kiocb->ki_flags & IOCB_HIPRI)
return -EINVAL;
kiocb->ki_complete = io_complete_rw;
}
req->rw.addr = READ_ONCE(sqe->addr);
req->rw.len = READ_ONCE(sqe->len);
req->buf_index = READ_ONCE(sqe->buf_index);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return 0;
}
static inline void io_rw_done(struct kiocb *kiocb, ssize_t ret)
{
switch (ret) {
case -EIOCBQUEUED:
break;
case -ERESTARTSYS:
case -ERESTARTNOINTR:
case -ERESTARTNOHAND:
case -ERESTART_RESTARTBLOCK:
/*
* We can't just restart the syscall, since previously
* submitted sqes may already be in progress. Just fail this
* IO with EINTR.
*/
ret = -EINTR;
fallthrough;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
default:
kiocb->ki_complete(kiocb, ret, 0);
}
}
static void kiocb_done(struct kiocb *kiocb, ssize_t ret,
struct io_comp_state *cs)
{
struct io_kiocb *req = container_of(kiocb, struct io_kiocb, rw.kiocb);
struct io_async_rw *io = req->async_data;
/* add previously done IO, if any */
if (io && io->bytes_done > 0) {
if (ret < 0)
ret = io->bytes_done;
else
ret += io->bytes_done;
}
if (req->flags & REQ_F_CUR_POS)
req->file->f_pos = kiocb->ki_pos;
if (ret >= 0 && kiocb->ki_complete == io_complete_rw)
__io_complete_rw(req, ret, 0, cs);
else
io_rw_done(kiocb, ret);
}
static ssize_t io_import_fixed(struct io_kiocb *req, int rw,
struct iov_iter *iter)
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
{
struct io_ring_ctx *ctx = req->ctx;
size_t len = req->rw.len;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
struct io_mapped_ubuf *imu;
u16 index, buf_index = req->buf_index;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
size_t offset;
u64 buf_addr;
if (unlikely(buf_index >= ctx->nr_user_bufs))
return -EFAULT;
index = array_index_nospec(buf_index, ctx->nr_user_bufs);
imu = &ctx->user_bufs[index];
buf_addr = req->rw.addr;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
/* overflow */
if (buf_addr + len < buf_addr)
return -EFAULT;
/* not inside the mapped region */
if (buf_addr < imu->ubuf || buf_addr + len > imu->ubuf + imu->len)
return -EFAULT;
/*
* May not be a start of buffer, set size appropriately
* and advance us to the beginning.
*/
offset = buf_addr - imu->ubuf;
iov_iter_bvec(iter, rw, imu->bvec, imu->nr_bvecs, offset + len);
if (offset) {
/*
* Don't use iov_iter_advance() here, as it's really slow for
* using the latter parts of a big fixed buffer - it iterates
* over each segment manually. We can cheat a bit here, because
* we know that:
*
* 1) it's a BVEC iter, we set it up
* 2) all bvecs are PAGE_SIZE in size, except potentially the
* first and last bvec
*
* So just find our index, and adjust the iterator afterwards.
* If the offset is within the first bvec (or the whole first
* bvec, just use iov_iter_advance(). This makes it easier
* since we can just skip the first segment, which may not
* be PAGE_SIZE aligned.
*/
const struct bio_vec *bvec = imu->bvec;
if (offset <= bvec->bv_len) {
iov_iter_advance(iter, offset);
} else {
unsigned long seg_skip;
/* skip first vec */
offset -= bvec->bv_len;
seg_skip = 1 + (offset >> PAGE_SHIFT);
iter->bvec = bvec + seg_skip;
iter->nr_segs -= seg_skip;
iter->count -= bvec->bv_len + offset;
iter->iov_offset = offset & ~PAGE_MASK;
}
}
return len;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
}
static void io_ring_submit_unlock(struct io_ring_ctx *ctx, bool needs_lock)
{
if (needs_lock)
mutex_unlock(&ctx->uring_lock);
}
static void io_ring_submit_lock(struct io_ring_ctx *ctx, bool needs_lock)
{
/*
* "Normal" inline submissions always hold the uring_lock, since we
* grab it from the system call. Same is true for the SQPOLL offload.
* The only exception is when we've detached the request and issue it
* from an async worker thread, grab the lock for that case.
*/
if (needs_lock)
mutex_lock(&ctx->uring_lock);
}
static struct io_buffer *io_buffer_select(struct io_kiocb *req, size_t *len,
int bgid, struct io_buffer *kbuf,
bool needs_lock)
{
struct io_buffer *head;
if (req->flags & REQ_F_BUFFER_SELECTED)
return kbuf;
io_ring_submit_lock(req->ctx, needs_lock);
lockdep_assert_held(&req->ctx->uring_lock);
head = idr_find(&req->ctx->io_buffer_idr, bgid);
if (head) {
if (!list_empty(&head->list)) {
kbuf = list_last_entry(&head->list, struct io_buffer,
list);
list_del(&kbuf->list);
} else {
kbuf = head;
idr_remove(&req->ctx->io_buffer_idr, bgid);
}
if (*len > kbuf->len)
*len = kbuf->len;
} else {
kbuf = ERR_PTR(-ENOBUFS);
}
io_ring_submit_unlock(req->ctx, needs_lock);
return kbuf;
}
static void __user *io_rw_buffer_select(struct io_kiocb *req, size_t *len,
bool needs_lock)
{
struct io_buffer *kbuf;
u16 bgid;
kbuf = (struct io_buffer *) (unsigned long) req->rw.addr;
bgid = req->buf_index;
kbuf = io_buffer_select(req, len, bgid, kbuf, needs_lock);
if (IS_ERR(kbuf))
return kbuf;
req->rw.addr = (u64) (unsigned long) kbuf;
req->flags |= REQ_F_BUFFER_SELECTED;
return u64_to_user_ptr(kbuf->addr);
}
#ifdef CONFIG_COMPAT
static ssize_t io_compat_import(struct io_kiocb *req, struct iovec *iov,
bool needs_lock)
{
struct compat_iovec __user *uiov;
compat_ssize_t clen;
void __user *buf;
ssize_t len;
uiov = u64_to_user_ptr(req->rw.addr);
if (!access_ok(uiov, sizeof(*uiov)))
return -EFAULT;
if (__get_user(clen, &uiov->iov_len))
return -EFAULT;
if (clen < 0)
return -EINVAL;
len = clen;
buf = io_rw_buffer_select(req, &len, needs_lock);
if (IS_ERR(buf))
return PTR_ERR(buf);
iov[0].iov_base = buf;
iov[0].iov_len = (compat_size_t) len;
return 0;
}
#endif
static ssize_t __io_iov_buffer_select(struct io_kiocb *req, struct iovec *iov,
bool needs_lock)
{
struct iovec __user *uiov = u64_to_user_ptr(req->rw.addr);
void __user *buf;
ssize_t len;
if (copy_from_user(iov, uiov, sizeof(*uiov)))
return -EFAULT;
len = iov[0].iov_len;
if (len < 0)
return -EINVAL;
buf = io_rw_buffer_select(req, &len, needs_lock);
if (IS_ERR(buf))
return PTR_ERR(buf);
iov[0].iov_base = buf;
iov[0].iov_len = len;
return 0;
}
static ssize_t io_iov_buffer_select(struct io_kiocb *req, struct iovec *iov,
bool needs_lock)
{
if (req->flags & REQ_F_BUFFER_SELECTED) {
struct io_buffer *kbuf;
kbuf = (struct io_buffer *) (unsigned long) req->rw.addr;
iov[0].iov_base = u64_to_user_ptr(kbuf->addr);
iov[0].iov_len = kbuf->len;
return 0;
}
if (!req->rw.len)
return 0;
else if (req->rw.len > 1)
return -EINVAL;
#ifdef CONFIG_COMPAT
if (req->ctx->compat)
return io_compat_import(req, iov, needs_lock);
#endif
return __io_iov_buffer_select(req, iov, needs_lock);
}
static ssize_t io_import_iovec(int rw, struct io_kiocb *req,
struct iovec **iovec, struct iov_iter *iter,
bool needs_lock)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
void __user *buf = u64_to_user_ptr(req->rw.addr);
size_t sqe_len = req->rw.len;
ssize_t ret;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
u8 opcode;
opcode = req->opcode;
if (opcode == IORING_OP_READ_FIXED || opcode == IORING_OP_WRITE_FIXED) {
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
*iovec = NULL;
return io_import_fixed(req, rw, iter);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/* buffer index only valid with fixed read/write, or buffer select */
if (req->buf_index && !(req->flags & REQ_F_BUFFER_SELECT))
return -EINVAL;
if (opcode == IORING_OP_READ || opcode == IORING_OP_WRITE) {
if (req->flags & REQ_F_BUFFER_SELECT) {
buf = io_rw_buffer_select(req, &sqe_len, needs_lock);
if (IS_ERR(buf))
return PTR_ERR(buf);
req->rw.len = sqe_len;
}
ret = import_single_range(rw, buf, sqe_len, *iovec, iter);
*iovec = NULL;
return ret;
}
if (req->flags & REQ_F_BUFFER_SELECT) {
ret = io_iov_buffer_select(req, *iovec, needs_lock);
if (!ret) {
ret = (*iovec)->iov_len;
iov_iter_init(iter, rw, *iovec, 1, ret);
}
*iovec = NULL;
return ret;
}
return __import_iovec(rw, buf, sqe_len, UIO_FASTIOV, iovec, iter,
req->ctx->compat);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static inline loff_t *io_kiocb_ppos(struct kiocb *kiocb)
{
return (kiocb->ki_filp->f_mode & FMODE_STREAM) ? NULL : &kiocb->ki_pos;
}
/*
* For files that don't have ->read_iter() and ->write_iter(), handle them
* by looping over ->read() or ->write() manually.
*/
static ssize_t loop_rw_iter(int rw, struct io_kiocb *req, struct iov_iter *iter)
{
struct kiocb *kiocb = &req->rw.kiocb;
struct file *file = req->file;
ssize_t ret = 0;
/*
* Don't support polled IO through this interface, and we can't
* support non-blocking either. For the latter, this just causes
* the kiocb to be handled from an async context.
*/
if (kiocb->ki_flags & IOCB_HIPRI)
return -EOPNOTSUPP;
if (kiocb->ki_flags & IOCB_NOWAIT)
return -EAGAIN;
while (iov_iter_count(iter)) {
struct iovec iovec;
ssize_t nr;
if (!iov_iter_is_bvec(iter)) {
iovec = iov_iter_iovec(iter);
} else {
iovec.iov_base = u64_to_user_ptr(req->rw.addr);
iovec.iov_len = req->rw.len;
}
if (rw == READ) {
nr = file->f_op->read(file, iovec.iov_base,
iovec.iov_len, io_kiocb_ppos(kiocb));
} else {
nr = file->f_op->write(file, iovec.iov_base,
iovec.iov_len, io_kiocb_ppos(kiocb));
}
if (nr < 0) {
if (!ret)
ret = nr;
break;
}
ret += nr;
if (nr != iovec.iov_len)
break;
req->rw.len -= nr;
req->rw.addr += nr;
iov_iter_advance(iter, nr);
}
return ret;
}
static void io_req_map_rw(struct io_kiocb *req, const struct iovec *iovec,
const struct iovec *fast_iov, struct iov_iter *iter)
{
struct io_async_rw *rw = req->async_data;
memcpy(&rw->iter, iter, sizeof(*iter));
rw->free_iovec = iovec;
rw->bytes_done = 0;
/* can only be fixed buffers, no need to do anything */
if (iov_iter_is_bvec(iter))
return;
if (!iovec) {
unsigned iov_off = 0;
rw->iter.iov = rw->fast_iov;
if (iter->iov != fast_iov) {
iov_off = iter->iov - fast_iov;
rw->iter.iov += iov_off;
}
if (rw->fast_iov != fast_iov)
memcpy(rw->fast_iov + iov_off, fast_iov + iov_off,
sizeof(struct iovec) * iter->nr_segs);
} else {
req->flags |= REQ_F_NEED_CLEANUP;
}
}
static inline int __io_alloc_async_data(struct io_kiocb *req)
{
WARN_ON_ONCE(!io_op_defs[req->opcode].async_size);
req->async_data = kmalloc(io_op_defs[req->opcode].async_size, GFP_KERNEL);
return req->async_data == NULL;
}
static int io_alloc_async_data(struct io_kiocb *req)
{
if (!io_op_defs[req->opcode].needs_async_data)
return 0;
return __io_alloc_async_data(req);
}
static int io_setup_async_rw(struct io_kiocb *req, const struct iovec *iovec,
const struct iovec *fast_iov,
struct iov_iter *iter, bool force)
{
if (!force && !io_op_defs[req->opcode].needs_async_data)
return 0;
if (!req->async_data) {
if (__io_alloc_async_data(req))
return -ENOMEM;
io_req_map_rw(req, iovec, fast_iov, iter);
}
return 0;
}
static inline int io_rw_prep_async(struct io_kiocb *req, int rw)
{
struct io_async_rw *iorw = req->async_data;
struct iovec *iov = iorw->fast_iov;
ssize_t ret;
ret = io_import_iovec(rw, req, &iov, &iorw->iter, false);
if (unlikely(ret < 0))
return ret;
iorw->bytes_done = 0;
iorw->free_iovec = iov;
if (iov)
req->flags |= REQ_F_NEED_CLEANUP;
return 0;
}
static int io_read_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
ssize_t ret;
ret = io_prep_rw(req, sqe);
if (ret)
return ret;
if (unlikely(!(req->file->f_mode & FMODE_READ)))
return -EBADF;
/* either don't need iovec imported or already have it */
if (!req->async_data)
return 0;
return io_rw_prep_async(req, READ);
}
/*
* This is our waitqueue callback handler, registered through lock_page_async()
* when we initially tried to do the IO with the iocb armed our waitqueue.
* This gets called when the page is unlocked, and we generally expect that to
* happen when the page IO is completed and the page is now uptodate. This will
* queue a task_work based retry of the operation, attempting to copy the data
* again. If the latter fails because the page was NOT uptodate, then we will
* do a thread based blocking retry of the operation. That's the unexpected
* slow path.
*/
static int io_async_buf_func(struct wait_queue_entry *wait, unsigned mode,
int sync, void *arg)
{
struct wait_page_queue *wpq;
struct io_kiocb *req = wait->private;
struct wait_page_key *key = arg;
int ret;
wpq = container_of(wait, struct wait_page_queue, wait);
for-5.9/io_uring-20200802 -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl8m7asQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgplrCD/0S17kio+k4cOJDGwl88WoJw+QiYmM5019k decZ1JymQvV1HXRmlcZiEAu0hHDD0FoovSRrw7II3gw3GouETmYQM62f6ZTpDeMD CED/fidnfULAkPaI6h+bj3jyI0cEuujG/R47rGSQEkIIr3RttqKZUzVkB9KN+KMw +OBuXZtMIoFFEVJ91qwC2dm2qHLqOn1/5MlT59knso/xbPOYOXsFQpGiACJqF97x 6qSSI8uGE+HZqvL2OLWPDBbLEJhrq+dzCgxln5VlvLele4UcRhOdonUb7nUwEKCe zwvtXzz16u1D1b8bJL4Kg5bGqyUAQUCSShsfBJJxh6vTTULiHyCX5sQaai1OEB16 4dpBL9E+nOUUix4wo9XBY0/KIYaPWg5L1CoEwkAXqkXPhFvNUucsC0u6KvmzZR3V 1OogVTjl6GhS8uEVQjTKNshkTIC9QHEMXDUOHtINDCb/sLU+ANXU5UpvsuzZ9+kt KGc4mdyCwaKBq4YW9sVwhhq/RHLD4AUtWZiUVfOE+0cltCLJUNMbQsJ+XrcYaQnm W4zz22Rep+SJuQNVcCW/w7N2zN3yB6gC1qeroSLvzw4b5el2TdFp+BcgVlLHK+uh xjsGNCq++fyzNk7vvMZ5hVq4JGXYjza7AiP5HlQ8nqdiPUKUPatWCBqUm9i9Cz/B n+0dlYbRwQ== =2vmy -----END PGP SIGNATURE----- Merge tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block Pull io_uring updates from Jens Axboe: "Lots of cleanups in here, hardening the code and/or making it easier to read and fixing bugs, but a core feature/change too adding support for real async buffered reads. With the latter in place, we just need buffered write async support and we're done relying on kthreads for the fast path. In detail: - Cleanup how memory accounting is done on ring setup/free (Bijan) - sq array offset calculation fixup (Dmitry) - Consistently handle blocking off O_DIRECT submission path (me) - Support proper async buffered reads, instead of relying on kthread offload for that. This uses the page waitqueue to drive retries from task_work, like we handle poll based retry. (me) - IO completion optimizations (me) - Fix race with accounting and ring fd install (me) - Support EPOLLEXCLUSIVE (Jiufei) - Get rid of the io_kiocb unionizing, made possible by shrinking other bits (Pavel) - Completion side cleanups (Pavel) - Cleanup REQ_F_ flags handling, and kill off many of them (Pavel) - Request environment grabbing cleanups (Pavel) - File and socket read/write cleanups (Pavel) - Improve kiocb_set_rw_flags() (Pavel) - Tons of fixes and cleanups (Pavel) - IORING_SQ_NEED_WAKEUP clear fix (Xiaoguang)" * tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block: (127 commits) io_uring: flip if handling after io_setup_async_rw fs: optimise kiocb_set_rw_flags() io_uring: don't touch 'ctx' after installing file descriptor io_uring: get rid of atomic FAA for cq_timeouts io_uring: consolidate *_check_overflow accounting io_uring: fix stalled deferred requests io_uring: fix racy overflow count reporting io_uring: deduplicate __io_complete_rw() io_uring: de-unionise io_kiocb io-wq: update hash bits io_uring: fix missing io_queue_linked_timeout() io_uring: mark ->work uninitialised after cleanup io_uring: deduplicate io_grab_files() calls io_uring: don't do opcode prep twice io_uring: clear IORING_SQ_NEED_WAKEUP after executing task works io_uring: batch put_task_struct() tasks: add put_task_struct_many() io_uring: return locked and pinned page accounting io_uring: don't miscount pinned memory io_uring: don't open-code recv kbuf managment ...
2020-08-04 04:01:22 +08:00
if (!wake_page_match(wpq, key))
return 0;
req->rw.kiocb.ki_flags &= ~IOCB_WAITQ;
list_del_init(&wait->entry);
init_task_work(&req->task_work, io_req_task_submit);
percpu_ref_get(&req->ctx->refs);
/* submit ref gets dropped, acquire a new one */
refcount_inc(&req->refs);
ret = io_req_task_work_add(req);
if (unlikely(ret)) {
struct task_struct *tsk;
/* queue just for cancelation */
init_task_work(&req->task_work, io_req_task_cancel);
tsk = io_wq_get_task(req->ctx->io_wq);
task_work_add(tsk, &req->task_work, TWA_NONE);
wake_up_process(tsk);
}
return 1;
}
/*
* This controls whether a given IO request should be armed for async page
* based retry. If we return false here, the request is handed to the async
* worker threads for retry. If we're doing buffered reads on a regular file,
* we prepare a private wait_page_queue entry and retry the operation. This
* will either succeed because the page is now uptodate and unlocked, or it
* will register a callback when the page is unlocked at IO completion. Through
* that callback, io_uring uses task_work to setup a retry of the operation.
* That retry will attempt the buffered read again. The retry will generally
* succeed, or in rare cases where it fails, we then fall back to using the
* async worker threads for a blocking retry.
*/
static bool io_rw_should_retry(struct io_kiocb *req)
{
struct io_async_rw *rw = req->async_data;
struct wait_page_queue *wait = &rw->wpq;
struct kiocb *kiocb = &req->rw.kiocb;
/* never retry for NOWAIT, we just complete with -EAGAIN */
if (req->flags & REQ_F_NOWAIT)
return false;
/* Only for buffered IO */
if (kiocb->ki_flags & (IOCB_DIRECT | IOCB_HIPRI))
return false;
/*
* just use poll if we can, and don't attempt if the fs doesn't
* support callback based unlocks
*/
if (file_can_poll(req->file) || !(req->file->f_mode & FMODE_BUF_RASYNC))
return false;
wait->wait.func = io_async_buf_func;
wait->wait.private = req;
wait->wait.flags = 0;
INIT_LIST_HEAD(&wait->wait.entry);
kiocb->ki_flags |= IOCB_WAITQ;
kiocb->ki_flags &= ~IOCB_NOWAIT;
kiocb->ki_waitq = wait;
return true;
}
static int io_iter_do_read(struct io_kiocb *req, struct iov_iter *iter)
{
if (req->file->f_op->read_iter)
return call_read_iter(req->file, &req->rw.kiocb, iter);
io_uring: Fix NULL pointer dereference in loop_rw_iter() loop_rw_iter() does not check whether the file has a read or write function. This can lead to NULL pointer dereference when the user passes in a file descriptor that does not have read or write function. The crash log looks like this: [ 99.834071] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 99.835364] #PF: supervisor instruction fetch in kernel mode [ 99.836522] #PF: error_code(0x0010) - not-present page [ 99.837771] PGD 8000000079d62067 P4D 8000000079d62067 PUD 79d8c067 PMD 0 [ 99.839649] Oops: 0010 [#2] SMP PTI [ 99.840591] CPU: 1 PID: 333 Comm: io_wqe_worker-0 Tainted: G D 5.8.0 #2 [ 99.842622] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 99.845140] RIP: 0010:0x0 [ 99.845840] Code: Bad RIP value. [ 99.846672] RSP: 0018:ffffa1c7c01ebc08 EFLAGS: 00010202 [ 99.848018] RAX: 0000000000000000 RBX: ffff92363bd67300 RCX: ffff92363d461208 [ 99.849854] RDX: 0000000000000010 RSI: 00007ffdbf696bb0 RDI: ffff92363bd67300 [ 99.851743] RBP: ffffa1c7c01ebc40 R08: 0000000000000000 R09: 0000000000000000 [ 99.853394] R10: ffffffff9ec692a0 R11: 0000000000000000 R12: 0000000000000010 [ 99.855148] R13: 0000000000000000 R14: ffff92363d461208 R15: ffffa1c7c01ebc68 [ 99.856914] FS: 0000000000000000(0000) GS:ffff92363dd00000(0000) knlGS:0000000000000000 [ 99.858651] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.860032] CR2: ffffffffffffffd6 CR3: 000000007ac66000 CR4: 00000000000006e0 [ 99.861979] Call Trace: [ 99.862617] loop_rw_iter.part.0+0xad/0x110 [ 99.863838] io_write+0x2ae/0x380 [ 99.864644] ? kvm_sched_clock_read+0x11/0x20 [ 99.865595] ? sched_clock+0x9/0x10 [ 99.866453] ? sched_clock_cpu+0x11/0xb0 [ 99.867326] ? newidle_balance+0x1d4/0x3c0 [ 99.868283] io_issue_sqe+0xd8f/0x1340 [ 99.869216] ? __switch_to+0x7f/0x450 [ 99.870280] ? __switch_to_asm+0x42/0x70 [ 99.871254] ? __switch_to_asm+0x36/0x70 [ 99.872133] ? lock_timer_base+0x72/0xa0 [ 99.873155] ? switch_mm_irqs_off+0x1bf/0x420 [ 99.874152] io_wq_submit_work+0x64/0x180 [ 99.875192] ? kthread_use_mm+0x71/0x100 [ 99.876132] io_worker_handle_work+0x267/0x440 [ 99.877233] io_wqe_worker+0x297/0x350 [ 99.878145] kthread+0x112/0x150 [ 99.878849] ? __io_worker_unuse+0x100/0x100 [ 99.879935] ? kthread_park+0x90/0x90 [ 99.880874] ret_from_fork+0x22/0x30 [ 99.881679] Modules linked in: [ 99.882493] CR2: 0000000000000000 [ 99.883324] ---[ end trace 4453745f4673190b ]--- [ 99.884289] RIP: 0010:0x0 [ 99.884837] Code: Bad RIP value. [ 99.885492] RSP: 0018:ffffa1c7c01ebc08 EFLAGS: 00010202 [ 99.886851] RAX: 0000000000000000 RBX: ffff92363acd7f00 RCX: ffff92363d461608 [ 99.888561] RDX: 0000000000000010 RSI: 00007ffe040d9e10 RDI: ffff92363acd7f00 [ 99.890203] RBP: ffffa1c7c01ebc40 R08: 0000000000000000 R09: 0000000000000000 [ 99.891907] R10: ffffffff9ec692a0 R11: 0000000000000000 R12: 0000000000000010 [ 99.894106] R13: 0000000000000000 R14: ffff92363d461608 R15: ffffa1c7c01ebc68 [ 99.896079] FS: 0000000000000000(0000) GS:ffff92363dd00000(0000) knlGS:0000000000000000 [ 99.898017] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.899197] CR2: ffffffffffffffd6 CR3: 000000007ac66000 CR4: 00000000000006e0 Fixes: 32960613b7c3 ("io_uring: correctly handle non ->{read,write}_iter() file_operations") Cc: stable@vger.kernel.org Signed-off-by: Guoyu Huang <hgy5945@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-05 18:53:50 +08:00
else if (req->file->f_op->read)
return loop_rw_iter(READ, req, iter);
io_uring: Fix NULL pointer dereference in loop_rw_iter() loop_rw_iter() does not check whether the file has a read or write function. This can lead to NULL pointer dereference when the user passes in a file descriptor that does not have read or write function. The crash log looks like this: [ 99.834071] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 99.835364] #PF: supervisor instruction fetch in kernel mode [ 99.836522] #PF: error_code(0x0010) - not-present page [ 99.837771] PGD 8000000079d62067 P4D 8000000079d62067 PUD 79d8c067 PMD 0 [ 99.839649] Oops: 0010 [#2] SMP PTI [ 99.840591] CPU: 1 PID: 333 Comm: io_wqe_worker-0 Tainted: G D 5.8.0 #2 [ 99.842622] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 99.845140] RIP: 0010:0x0 [ 99.845840] Code: Bad RIP value. [ 99.846672] RSP: 0018:ffffa1c7c01ebc08 EFLAGS: 00010202 [ 99.848018] RAX: 0000000000000000 RBX: ffff92363bd67300 RCX: ffff92363d461208 [ 99.849854] RDX: 0000000000000010 RSI: 00007ffdbf696bb0 RDI: ffff92363bd67300 [ 99.851743] RBP: ffffa1c7c01ebc40 R08: 0000000000000000 R09: 0000000000000000 [ 99.853394] R10: ffffffff9ec692a0 R11: 0000000000000000 R12: 0000000000000010 [ 99.855148] R13: 0000000000000000 R14: ffff92363d461208 R15: ffffa1c7c01ebc68 [ 99.856914] FS: 0000000000000000(0000) GS:ffff92363dd00000(0000) knlGS:0000000000000000 [ 99.858651] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.860032] CR2: ffffffffffffffd6 CR3: 000000007ac66000 CR4: 00000000000006e0 [ 99.861979] Call Trace: [ 99.862617] loop_rw_iter.part.0+0xad/0x110 [ 99.863838] io_write+0x2ae/0x380 [ 99.864644] ? kvm_sched_clock_read+0x11/0x20 [ 99.865595] ? sched_clock+0x9/0x10 [ 99.866453] ? sched_clock_cpu+0x11/0xb0 [ 99.867326] ? newidle_balance+0x1d4/0x3c0 [ 99.868283] io_issue_sqe+0xd8f/0x1340 [ 99.869216] ? __switch_to+0x7f/0x450 [ 99.870280] ? __switch_to_asm+0x42/0x70 [ 99.871254] ? __switch_to_asm+0x36/0x70 [ 99.872133] ? lock_timer_base+0x72/0xa0 [ 99.873155] ? switch_mm_irqs_off+0x1bf/0x420 [ 99.874152] io_wq_submit_work+0x64/0x180 [ 99.875192] ? kthread_use_mm+0x71/0x100 [ 99.876132] io_worker_handle_work+0x267/0x440 [ 99.877233] io_wqe_worker+0x297/0x350 [ 99.878145] kthread+0x112/0x150 [ 99.878849] ? __io_worker_unuse+0x100/0x100 [ 99.879935] ? kthread_park+0x90/0x90 [ 99.880874] ret_from_fork+0x22/0x30 [ 99.881679] Modules linked in: [ 99.882493] CR2: 0000000000000000 [ 99.883324] ---[ end trace 4453745f4673190b ]--- [ 99.884289] RIP: 0010:0x0 [ 99.884837] Code: Bad RIP value. [ 99.885492] RSP: 0018:ffffa1c7c01ebc08 EFLAGS: 00010202 [ 99.886851] RAX: 0000000000000000 RBX: ffff92363acd7f00 RCX: ffff92363d461608 [ 99.888561] RDX: 0000000000000010 RSI: 00007ffe040d9e10 RDI: ffff92363acd7f00 [ 99.890203] RBP: ffffa1c7c01ebc40 R08: 0000000000000000 R09: 0000000000000000 [ 99.891907] R10: ffffffff9ec692a0 R11: 0000000000000000 R12: 0000000000000010 [ 99.894106] R13: 0000000000000000 R14: ffff92363d461608 R15: ffffa1c7c01ebc68 [ 99.896079] FS: 0000000000000000(0000) GS:ffff92363dd00000(0000) knlGS:0000000000000000 [ 99.898017] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.899197] CR2: ffffffffffffffd6 CR3: 000000007ac66000 CR4: 00000000000006e0 Fixes: 32960613b7c3 ("io_uring: correctly handle non ->{read,write}_iter() file_operations") Cc: stable@vger.kernel.org Signed-off-by: Guoyu Huang <hgy5945@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-05 18:53:50 +08:00
else
return -EINVAL;
}
static int io_read(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs;
struct kiocb *kiocb = &req->rw.kiocb;
struct iov_iter __iter, *iter = &__iter;
struct io_async_rw *rw = req->async_data;
ssize_t io_size, ret, ret2;
bool no_async;
if (rw) {
iter = &rw->iter;
iovec = NULL;
} else {
ret = io_import_iovec(READ, req, &iovec, iter, !force_nonblock);
if (ret < 0)
return ret;
}
io_size = iov_iter_count(iter);
req->result = io_size;
ret = 0;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/* Ensure we clear previously set non-block flag */
if (!force_nonblock)
kiocb->ki_flags &= ~IOCB_NOWAIT;
else
kiocb->ki_flags |= IOCB_NOWAIT;
/* If the file doesn't support async, just async punt */
no_async = force_nonblock && !io_file_supports_async(req->file, READ);
if (no_async)
goto copy_iov;
ret = rw_verify_area(READ, req->file, io_kiocb_ppos(kiocb), io_size);
if (unlikely(ret))
goto out_free;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
ret = io_iter_do_read(req, iter);
if (!ret) {
goto done;
} else if (ret == -EIOCBQUEUED) {
ret = 0;
goto out_free;
} else if (ret == -EAGAIN) {
/* IOPOLL retry should happen for io-wq threads */
if (!force_nonblock && !(req->ctx->flags & IORING_SETUP_IOPOLL))
goto done;
/* no retry on NONBLOCK marked file */
if (req->file->f_flags & O_NONBLOCK)
goto done;
/* some cases will consume bytes even on error returns */
iov_iter_revert(iter, io_size - iov_iter_count(iter));
ret = 0;
goto copy_iov;
} else if (ret < 0) {
/* make sure -ERESTARTSYS -> -EINTR is done */
goto done;
}
/* read it all, or we did blocking attempt. no retry. */
if (!iov_iter_count(iter) || !force_nonblock ||
(req->file->f_flags & O_NONBLOCK))
goto done;
io_size -= ret;
copy_iov:
ret2 = io_setup_async_rw(req, iovec, inline_vecs, iter, true);
if (ret2) {
ret = ret2;
goto out_free;
}
if (no_async)
return -EAGAIN;
rw = req->async_data;
/* it's copied and will be cleaned with ->io */
iovec = NULL;
/* now use our persistent iterator, if we aren't already */
iter = &rw->iter;
retry:
rw->bytes_done += ret;
/* if we can retry, do so with the callbacks armed */
if (!io_rw_should_retry(req)) {
kiocb->ki_flags &= ~IOCB_WAITQ;
return -EAGAIN;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
/*
* Now retry read with the IOCB_WAITQ parts set in the iocb. If we
* get -EIOCBQUEUED, then we'll get a notification when the desired
* page gets unlocked. We can also get a partial read here, and if we
* do, then just retry at the new offset.
*/
ret = io_iter_do_read(req, iter);
if (ret == -EIOCBQUEUED) {
ret = 0;
goto out_free;
} else if (ret > 0 && ret < io_size) {
/* we got some bytes, but not all. retry. */
goto retry;
}
done:
kiocb_done(kiocb, ret, cs);
ret = 0;
out_free:
/* it's reportedly faster than delegating the null check to kfree() */
if (iovec)
kfree(iovec);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return ret;
}
static int io_write_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
ssize_t ret;
ret = io_prep_rw(req, sqe);
if (ret)
return ret;
if (unlikely(!(req->file->f_mode & FMODE_WRITE)))
return -EBADF;
/* either don't need iovec imported or already have it */
if (!req->async_data)
return 0;
return io_rw_prep_async(req, WRITE);
}
static int io_write(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs;
struct kiocb *kiocb = &req->rw.kiocb;
struct iov_iter __iter, *iter = &__iter;
struct io_async_rw *rw = req->async_data;
ssize_t ret, ret2, io_size;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
if (rw) {
iter = &rw->iter;
iovec = NULL;
} else {
ret = io_import_iovec(WRITE, req, &iovec, iter, !force_nonblock);
if (ret < 0)
return ret;
}
io_size = iov_iter_count(iter);
req->result = io_size;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/* Ensure we clear previously set non-block flag */
if (!force_nonblock)
kiocb->ki_flags &= ~IOCB_NOWAIT;
else
kiocb->ki_flags |= IOCB_NOWAIT;
/* If the file doesn't support async, just async punt */
if (force_nonblock && !io_file_supports_async(req->file, WRITE))
goto copy_iov;
/* file path doesn't support NOWAIT for non-direct_IO */
if (force_nonblock && !(kiocb->ki_flags & IOCB_DIRECT) &&
(req->flags & REQ_F_ISREG))
goto copy_iov;
ret = rw_verify_area(WRITE, req->file, io_kiocb_ppos(kiocb), io_size);
if (unlikely(ret))
goto out_free;
/*
* Open-code file_start_write here to grab freeze protection,
* which will be released by another thread in
* io_complete_rw(). Fool lockdep by telling it the lock got
* released so that it doesn't complain about the held lock when
* we return to userspace.
*/
if (req->flags & REQ_F_ISREG) {
sb_start_write(file_inode(req->file)->i_sb);
__sb_writers_release(file_inode(req->file)->i_sb,
SB_FREEZE_WRITE);
}
kiocb->ki_flags |= IOCB_WRITE;
if (req->file->f_op->write_iter)
ret2 = call_write_iter(req->file, kiocb, iter);
io_uring: Fix NULL pointer dereference in loop_rw_iter() loop_rw_iter() does not check whether the file has a read or write function. This can lead to NULL pointer dereference when the user passes in a file descriptor that does not have read or write function. The crash log looks like this: [ 99.834071] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 99.835364] #PF: supervisor instruction fetch in kernel mode [ 99.836522] #PF: error_code(0x0010) - not-present page [ 99.837771] PGD 8000000079d62067 P4D 8000000079d62067 PUD 79d8c067 PMD 0 [ 99.839649] Oops: 0010 [#2] SMP PTI [ 99.840591] CPU: 1 PID: 333 Comm: io_wqe_worker-0 Tainted: G D 5.8.0 #2 [ 99.842622] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 99.845140] RIP: 0010:0x0 [ 99.845840] Code: Bad RIP value. [ 99.846672] RSP: 0018:ffffa1c7c01ebc08 EFLAGS: 00010202 [ 99.848018] RAX: 0000000000000000 RBX: ffff92363bd67300 RCX: ffff92363d461208 [ 99.849854] RDX: 0000000000000010 RSI: 00007ffdbf696bb0 RDI: ffff92363bd67300 [ 99.851743] RBP: ffffa1c7c01ebc40 R08: 0000000000000000 R09: 0000000000000000 [ 99.853394] R10: ffffffff9ec692a0 R11: 0000000000000000 R12: 0000000000000010 [ 99.855148] R13: 0000000000000000 R14: ffff92363d461208 R15: ffffa1c7c01ebc68 [ 99.856914] FS: 0000000000000000(0000) GS:ffff92363dd00000(0000) knlGS:0000000000000000 [ 99.858651] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.860032] CR2: ffffffffffffffd6 CR3: 000000007ac66000 CR4: 00000000000006e0 [ 99.861979] Call Trace: [ 99.862617] loop_rw_iter.part.0+0xad/0x110 [ 99.863838] io_write+0x2ae/0x380 [ 99.864644] ? kvm_sched_clock_read+0x11/0x20 [ 99.865595] ? sched_clock+0x9/0x10 [ 99.866453] ? sched_clock_cpu+0x11/0xb0 [ 99.867326] ? newidle_balance+0x1d4/0x3c0 [ 99.868283] io_issue_sqe+0xd8f/0x1340 [ 99.869216] ? __switch_to+0x7f/0x450 [ 99.870280] ? __switch_to_asm+0x42/0x70 [ 99.871254] ? __switch_to_asm+0x36/0x70 [ 99.872133] ? lock_timer_base+0x72/0xa0 [ 99.873155] ? switch_mm_irqs_off+0x1bf/0x420 [ 99.874152] io_wq_submit_work+0x64/0x180 [ 99.875192] ? kthread_use_mm+0x71/0x100 [ 99.876132] io_worker_handle_work+0x267/0x440 [ 99.877233] io_wqe_worker+0x297/0x350 [ 99.878145] kthread+0x112/0x150 [ 99.878849] ? __io_worker_unuse+0x100/0x100 [ 99.879935] ? kthread_park+0x90/0x90 [ 99.880874] ret_from_fork+0x22/0x30 [ 99.881679] Modules linked in: [ 99.882493] CR2: 0000000000000000 [ 99.883324] ---[ end trace 4453745f4673190b ]--- [ 99.884289] RIP: 0010:0x0 [ 99.884837] Code: Bad RIP value. [ 99.885492] RSP: 0018:ffffa1c7c01ebc08 EFLAGS: 00010202 [ 99.886851] RAX: 0000000000000000 RBX: ffff92363acd7f00 RCX: ffff92363d461608 [ 99.888561] RDX: 0000000000000010 RSI: 00007ffe040d9e10 RDI: ffff92363acd7f00 [ 99.890203] RBP: ffffa1c7c01ebc40 R08: 0000000000000000 R09: 0000000000000000 [ 99.891907] R10: ffffffff9ec692a0 R11: 0000000000000000 R12: 0000000000000010 [ 99.894106] R13: 0000000000000000 R14: ffff92363d461608 R15: ffffa1c7c01ebc68 [ 99.896079] FS: 0000000000000000(0000) GS:ffff92363dd00000(0000) knlGS:0000000000000000 [ 99.898017] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.899197] CR2: ffffffffffffffd6 CR3: 000000007ac66000 CR4: 00000000000006e0 Fixes: 32960613b7c3 ("io_uring: correctly handle non ->{read,write}_iter() file_operations") Cc: stable@vger.kernel.org Signed-off-by: Guoyu Huang <hgy5945@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-05 18:53:50 +08:00
else if (req->file->f_op->write)
ret2 = loop_rw_iter(WRITE, req, iter);
io_uring: Fix NULL pointer dereference in loop_rw_iter() loop_rw_iter() does not check whether the file has a read or write function. This can lead to NULL pointer dereference when the user passes in a file descriptor that does not have read or write function. The crash log looks like this: [ 99.834071] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 99.835364] #PF: supervisor instruction fetch in kernel mode [ 99.836522] #PF: error_code(0x0010) - not-present page [ 99.837771] PGD 8000000079d62067 P4D 8000000079d62067 PUD 79d8c067 PMD 0 [ 99.839649] Oops: 0010 [#2] SMP PTI [ 99.840591] CPU: 1 PID: 333 Comm: io_wqe_worker-0 Tainted: G D 5.8.0 #2 [ 99.842622] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 99.845140] RIP: 0010:0x0 [ 99.845840] Code: Bad RIP value. [ 99.846672] RSP: 0018:ffffa1c7c01ebc08 EFLAGS: 00010202 [ 99.848018] RAX: 0000000000000000 RBX: ffff92363bd67300 RCX: ffff92363d461208 [ 99.849854] RDX: 0000000000000010 RSI: 00007ffdbf696bb0 RDI: ffff92363bd67300 [ 99.851743] RBP: ffffa1c7c01ebc40 R08: 0000000000000000 R09: 0000000000000000 [ 99.853394] R10: ffffffff9ec692a0 R11: 0000000000000000 R12: 0000000000000010 [ 99.855148] R13: 0000000000000000 R14: ffff92363d461208 R15: ffffa1c7c01ebc68 [ 99.856914] FS: 0000000000000000(0000) GS:ffff92363dd00000(0000) knlGS:0000000000000000 [ 99.858651] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.860032] CR2: ffffffffffffffd6 CR3: 000000007ac66000 CR4: 00000000000006e0 [ 99.861979] Call Trace: [ 99.862617] loop_rw_iter.part.0+0xad/0x110 [ 99.863838] io_write+0x2ae/0x380 [ 99.864644] ? kvm_sched_clock_read+0x11/0x20 [ 99.865595] ? sched_clock+0x9/0x10 [ 99.866453] ? sched_clock_cpu+0x11/0xb0 [ 99.867326] ? newidle_balance+0x1d4/0x3c0 [ 99.868283] io_issue_sqe+0xd8f/0x1340 [ 99.869216] ? __switch_to+0x7f/0x450 [ 99.870280] ? __switch_to_asm+0x42/0x70 [ 99.871254] ? __switch_to_asm+0x36/0x70 [ 99.872133] ? lock_timer_base+0x72/0xa0 [ 99.873155] ? switch_mm_irqs_off+0x1bf/0x420 [ 99.874152] io_wq_submit_work+0x64/0x180 [ 99.875192] ? kthread_use_mm+0x71/0x100 [ 99.876132] io_worker_handle_work+0x267/0x440 [ 99.877233] io_wqe_worker+0x297/0x350 [ 99.878145] kthread+0x112/0x150 [ 99.878849] ? __io_worker_unuse+0x100/0x100 [ 99.879935] ? kthread_park+0x90/0x90 [ 99.880874] ret_from_fork+0x22/0x30 [ 99.881679] Modules linked in: [ 99.882493] CR2: 0000000000000000 [ 99.883324] ---[ end trace 4453745f4673190b ]--- [ 99.884289] RIP: 0010:0x0 [ 99.884837] Code: Bad RIP value. [ 99.885492] RSP: 0018:ffffa1c7c01ebc08 EFLAGS: 00010202 [ 99.886851] RAX: 0000000000000000 RBX: ffff92363acd7f00 RCX: ffff92363d461608 [ 99.888561] RDX: 0000000000000010 RSI: 00007ffe040d9e10 RDI: ffff92363acd7f00 [ 99.890203] RBP: ffffa1c7c01ebc40 R08: 0000000000000000 R09: 0000000000000000 [ 99.891907] R10: ffffffff9ec692a0 R11: 0000000000000000 R12: 0000000000000010 [ 99.894106] R13: 0000000000000000 R14: ffff92363d461608 R15: ffffa1c7c01ebc68 [ 99.896079] FS: 0000000000000000(0000) GS:ffff92363dd00000(0000) knlGS:0000000000000000 [ 99.898017] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.899197] CR2: ffffffffffffffd6 CR3: 000000007ac66000 CR4: 00000000000006e0 Fixes: 32960613b7c3 ("io_uring: correctly handle non ->{read,write}_iter() file_operations") Cc: stable@vger.kernel.org Signed-off-by: Guoyu Huang <hgy5945@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-05 18:53:50 +08:00
else
ret2 = -EINVAL;
/*
* Raw bdev writes will return -EOPNOTSUPP for IOCB_NOWAIT. Just
* retry them without IOCB_NOWAIT.
*/
if (ret2 == -EOPNOTSUPP && (kiocb->ki_flags & IOCB_NOWAIT))
ret2 = -EAGAIN;
/* no retry on NONBLOCK marked file */
if (ret2 == -EAGAIN && (req->file->f_flags & O_NONBLOCK))
goto done;
if (!force_nonblock || ret2 != -EAGAIN) {
/* IOPOLL retry should happen for io-wq threads */
if ((req->ctx->flags & IORING_SETUP_IOPOLL) && ret2 == -EAGAIN)
goto copy_iov;
done:
kiocb_done(kiocb, ret2, cs);
} else {
copy_iov:
/* some cases will consume bytes even on error returns */
iov_iter_revert(iter, io_size - iov_iter_count(iter));
ret = io_setup_async_rw(req, iovec, inline_vecs, iter, false);
if (!ret)
return -EAGAIN;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
out_free:
/* it's reportedly faster than delegating the null check to kfree() */
if (iovec)
kfree(iovec);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return ret;
}
static int io_renameat_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
struct io_rename *ren = &req->rename;
const char __user *oldf, *newf;
if (unlikely(req->flags & REQ_F_FIXED_FILE))
return -EBADF;
ren->old_dfd = READ_ONCE(sqe->fd);
oldf = u64_to_user_ptr(READ_ONCE(sqe->addr));
newf = u64_to_user_ptr(READ_ONCE(sqe->addr2));
ren->new_dfd = READ_ONCE(sqe->len);
ren->flags = READ_ONCE(sqe->rename_flags);
ren->oldpath = getname(oldf);
if (IS_ERR(ren->oldpath))
return PTR_ERR(ren->oldpath);
ren->newpath = getname(newf);
if (IS_ERR(ren->newpath)) {
putname(ren->oldpath);
return PTR_ERR(ren->newpath);
}
req->flags |= REQ_F_NEED_CLEANUP;
return 0;
}
static int io_renameat(struct io_kiocb *req, bool force_nonblock)
{
struct io_rename *ren = &req->rename;
int ret;
if (force_nonblock)
return -EAGAIN;
ret = do_renameat2(ren->old_dfd, ren->oldpath, ren->new_dfd,
ren->newpath, ren->flags);
req->flags &= ~REQ_F_NEED_CLEANUP;
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
static int io_unlinkat_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
struct io_unlink *un = &req->unlink;
const char __user *fname;
if (unlikely(req->flags & REQ_F_FIXED_FILE))
return -EBADF;
un->dfd = READ_ONCE(sqe->fd);
un->flags = READ_ONCE(sqe->unlink_flags);
if (un->flags & ~AT_REMOVEDIR)
return -EINVAL;
fname = u64_to_user_ptr(READ_ONCE(sqe->addr));
un->filename = getname(fname);
if (IS_ERR(un->filename))
return PTR_ERR(un->filename);
req->flags |= REQ_F_NEED_CLEANUP;
return 0;
}
static int io_unlinkat(struct io_kiocb *req, bool force_nonblock)
{
struct io_unlink *un = &req->unlink;
int ret;
if (force_nonblock)
return -EAGAIN;
if (un->flags & AT_REMOVEDIR)
ret = do_rmdir(un->dfd, un->filename);
else
ret = do_unlinkat(un->dfd, un->filename);
req->flags &= ~REQ_F_NEED_CLEANUP;
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
static int io_shutdown_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
#if defined(CONFIG_NET)
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
if (sqe->ioprio || sqe->off || sqe->addr || sqe->rw_flags ||
sqe->buf_index)
return -EINVAL;
req->shutdown.how = READ_ONCE(sqe->len);
return 0;
#else
return -EOPNOTSUPP;
#endif
}
static int io_shutdown(struct io_kiocb *req, bool force_nonblock)
{
#if defined(CONFIG_NET)
struct socket *sock;
int ret;
if (force_nonblock)
return -EAGAIN;
for-5.11/io_uring-2020-12-14 -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/XeDUQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpnF9D/4+l1r1G5AcsSsgEvu1aCjP83LLWrHIAA5+ ca3OY6vwOjBvqI7oOoPcYJeYJ9uuGGQc31tDFJtP6Sl6Gk31AB4iSddyrowaX+t+ UJyJNfsgWKiLjY48EyQJ0gIqjuvPq8hPGMGClJb1A7+w87fqBC5UwCWEnJmE7MaX 401kIw0CRVWYTnDEOYxToss6D6gQ30E8UZjdJ0cG4g8xVQBY2kKwYR3F9tDlAwsY CF+RCKpibcKwnaNZJBL67ClWjj1hC0ivg0O0G+W1UYysesKKdWFRI2rmxvH55K5T 7tHlfVuVPladNmlLVNZnCvyqBrFHyAZPmOsdv3xQOvJ7pZPaxKV9xIYryQKZW4H4 9tKkj3T1aop/fDGqIMxgymZsWW+1vvxAmM+7WkdOPHwHRSakJ5wGIj6Ekpton+5y aixJUFq390o/o+S8PDO7mgzdvYrasv3iLl5UxnIcU3rq30wxnRKit4vUZny8DlzF gOTw7QSocximhGYci+Uz4d4/XdK2CHc6eZDkQDltgJXxIrdsrN0qKxMCEsMKgCR1 RMiDv+52MP6kp/wpXiOHQF25YRnUOW0qfEjWKK6Ye28DGuKPPuIXtN/BUD3rjdIc IJX3lDfOI3PgXNX24nOarucrF+ootyRmE6tGTVZhCVBhUXGR+MGatGfkeCqnmNzZ gny2+UrGIQ== =ly9V -----END PGP SIGNATURE----- Merge tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block Pull io_uring updates from Jens Axboe: "Fairly light set of changes this time around, and mostly some bits that were pushed out to 5.11 instead of 5.10, fixes/cleanups, and a few features. In particular: - Cleanups around iovec import (David Laight, Pavel) - Add timeout support for io_uring_enter(2), which enables us to clean up liburing and avoid a timeout sqe submission in the completion path. The big win here is that it allows setups that split SQ and CQ handling into separate threads to avoid locking, as the CQ side will no longer submit when timeouts are needed when waiting for events (Hao Xu) - Add support for socket shutdown, and renameat/unlinkat. - SQPOLL cleanups and improvements (Xiaoguang Wang) - Allow SQPOLL setups for CAP_SYS_NICE, and enable regular (non-fixed) files to be used. - Cancelation improvements (Pavel) - Fixed file reference improvements (Pavel) - IOPOLL related race fixes (Pavel) - Lots of other little fixes and cleanups (mostly Pavel)" * tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block: (43 commits) io_uring: fix io_cqring_events()'s noflush io_uring: fix racy IOPOLL flush overflow io_uring: fix racy IOPOLL completions io_uring: always let io_iopoll_complete() complete polled io io_uring: add timeout update io_uring: restructure io_timeout_cancel() io_uring: fix files cancellation io_uring: use bottom half safe lock for fixed file data io_uring: fix miscounting ios_left io_uring: change submit file state invariant io_uring: check kthread stopped flag when sq thread is unparked io_uring: share fixed_file_refs b/w multiple rsrcs io_uring: replace inflight_wait with tctx->wait io_uring: don't take fs for recvmsg/sendmsg io_uring: only wake up sq thread while current task is in io worker context io_uring: don't acquire uring_lock twice io_uring: initialize 'timeout' properly in io_sq_thread() io_uring: refactor io_sq_thread() handling io_uring: always batch cancel in *cancel_files() io_uring: pass files into kill timeouts/poll ...
2020-12-17 04:44:05 +08:00
sock = sock_from_file(req->file);
if (unlikely(!sock))
for-5.11/io_uring-2020-12-14 -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/XeDUQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpnF9D/4+l1r1G5AcsSsgEvu1aCjP83LLWrHIAA5+ ca3OY6vwOjBvqI7oOoPcYJeYJ9uuGGQc31tDFJtP6Sl6Gk31AB4iSddyrowaX+t+ UJyJNfsgWKiLjY48EyQJ0gIqjuvPq8hPGMGClJb1A7+w87fqBC5UwCWEnJmE7MaX 401kIw0CRVWYTnDEOYxToss6D6gQ30E8UZjdJ0cG4g8xVQBY2kKwYR3F9tDlAwsY CF+RCKpibcKwnaNZJBL67ClWjj1hC0ivg0O0G+W1UYysesKKdWFRI2rmxvH55K5T 7tHlfVuVPladNmlLVNZnCvyqBrFHyAZPmOsdv3xQOvJ7pZPaxKV9xIYryQKZW4H4 9tKkj3T1aop/fDGqIMxgymZsWW+1vvxAmM+7WkdOPHwHRSakJ5wGIj6Ekpton+5y aixJUFq390o/o+S8PDO7mgzdvYrasv3iLl5UxnIcU3rq30wxnRKit4vUZny8DlzF gOTw7QSocximhGYci+Uz4d4/XdK2CHc6eZDkQDltgJXxIrdsrN0qKxMCEsMKgCR1 RMiDv+52MP6kp/wpXiOHQF25YRnUOW0qfEjWKK6Ye28DGuKPPuIXtN/BUD3rjdIc IJX3lDfOI3PgXNX24nOarucrF+ootyRmE6tGTVZhCVBhUXGR+MGatGfkeCqnmNzZ gny2+UrGIQ== =ly9V -----END PGP SIGNATURE----- Merge tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block Pull io_uring updates from Jens Axboe: "Fairly light set of changes this time around, and mostly some bits that were pushed out to 5.11 instead of 5.10, fixes/cleanups, and a few features. In particular: - Cleanups around iovec import (David Laight, Pavel) - Add timeout support for io_uring_enter(2), which enables us to clean up liburing and avoid a timeout sqe submission in the completion path. The big win here is that it allows setups that split SQ and CQ handling into separate threads to avoid locking, as the CQ side will no longer submit when timeouts are needed when waiting for events (Hao Xu) - Add support for socket shutdown, and renameat/unlinkat. - SQPOLL cleanups and improvements (Xiaoguang Wang) - Allow SQPOLL setups for CAP_SYS_NICE, and enable regular (non-fixed) files to be used. - Cancelation improvements (Pavel) - Fixed file reference improvements (Pavel) - IOPOLL related race fixes (Pavel) - Lots of other little fixes and cleanups (mostly Pavel)" * tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block: (43 commits) io_uring: fix io_cqring_events()'s noflush io_uring: fix racy IOPOLL flush overflow io_uring: fix racy IOPOLL completions io_uring: always let io_iopoll_complete() complete polled io io_uring: add timeout update io_uring: restructure io_timeout_cancel() io_uring: fix files cancellation io_uring: use bottom half safe lock for fixed file data io_uring: fix miscounting ios_left io_uring: change submit file state invariant io_uring: check kthread stopped flag when sq thread is unparked io_uring: share fixed_file_refs b/w multiple rsrcs io_uring: replace inflight_wait with tctx->wait io_uring: don't take fs for recvmsg/sendmsg io_uring: only wake up sq thread while current task is in io worker context io_uring: don't acquire uring_lock twice io_uring: initialize 'timeout' properly in io_sq_thread() io_uring: refactor io_sq_thread() handling io_uring: always batch cancel in *cancel_files() io_uring: pass files into kill timeouts/poll ...
2020-12-17 04:44:05 +08:00
return -ENOTSOCK;
ret = __sys_shutdown_sock(sock, req->shutdown.how);
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
#else
return -EOPNOTSUPP;
#endif
}
static int __io_splice_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
struct io_splice* sp = &req->splice;
unsigned int valid_flags = SPLICE_F_FD_IN_FIXED | SPLICE_F_ALL;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
sp->file_in = NULL;
sp->len = READ_ONCE(sqe->len);
sp->flags = READ_ONCE(sqe->splice_flags);
if (unlikely(sp->flags & ~valid_flags))
return -EINVAL;
sp->file_in = io_file_get(NULL, req, READ_ONCE(sqe->splice_fd_in),
(sp->flags & SPLICE_F_FD_IN_FIXED));
if (!sp->file_in)
return -EBADF;
req->flags |= REQ_F_NEED_CLEANUP;
if (!S_ISREG(file_inode(sp->file_in)->i_mode)) {
/*
* Splice operation will be punted aync, and here need to
* modify io_wq_work.flags, so initialize io_wq_work firstly.
*/
io_req_init_async(req);
req->work.flags |= IO_WQ_WORK_UNBOUND;
}
return 0;
}
static int io_tee_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
if (READ_ONCE(sqe->splice_off_in) || READ_ONCE(sqe->off))
return -EINVAL;
return __io_splice_prep(req, sqe);
}
static int io_tee(struct io_kiocb *req, bool force_nonblock)
{
struct io_splice *sp = &req->splice;
struct file *in = sp->file_in;
struct file *out = sp->file_out;
unsigned int flags = sp->flags & ~SPLICE_F_FD_IN_FIXED;
long ret = 0;
if (force_nonblock)
return -EAGAIN;
if (sp->len)
ret = do_tee(in, out, sp->len, flags);
io_put_file(req, in, (sp->flags & SPLICE_F_FD_IN_FIXED));
req->flags &= ~REQ_F_NEED_CLEANUP;
if (ret != sp->len)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
static int io_splice_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_splice* sp = &req->splice;
sp->off_in = READ_ONCE(sqe->splice_off_in);
sp->off_out = READ_ONCE(sqe->off);
return __io_splice_prep(req, sqe);
}
static int io_splice(struct io_kiocb *req, bool force_nonblock)
{
struct io_splice *sp = &req->splice;
struct file *in = sp->file_in;
struct file *out = sp->file_out;
unsigned int flags = sp->flags & ~SPLICE_F_FD_IN_FIXED;
loff_t *poff_in, *poff_out;
long ret = 0;
if (force_nonblock)
return -EAGAIN;
poff_in = (sp->off_in == -1) ? NULL : &sp->off_in;
poff_out = (sp->off_out == -1) ? NULL : &sp->off_out;
if (sp->len)
ret = do_splice(in, poff_in, out, poff_out, sp->len, flags);
io_put_file(req, in, (sp->flags & SPLICE_F_FD_IN_FIXED));
req->flags &= ~REQ_F_NEED_CLEANUP;
if (ret != sp->len)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/*
* IORING_OP_NOP just posts a completion event, nothing else.
*/
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_nop(struct io_kiocb *req, struct io_comp_state *cs)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_ring_ctx *ctx = req->ctx;
if (unlikely(ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, 0, 0, cs);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return 0;
}
static int io_prep_fsync(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_ring_ctx *ctx = req->ctx;
if (!req->file)
return -EBADF;
if (unlikely(ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
if (unlikely(sqe->addr || sqe->ioprio || sqe->buf_index))
return -EINVAL;
req->sync.flags = READ_ONCE(sqe->fsync_flags);
if (unlikely(req->sync.flags & ~IORING_FSYNC_DATASYNC))
return -EINVAL;
req->sync.off = READ_ONCE(sqe->off);
req->sync.len = READ_ONCE(sqe->len);
return 0;
}
static int io_fsync(struct io_kiocb *req, bool force_nonblock)
{
loff_t end = req->sync.off + req->sync.len;
int ret;
/* fsync always requires a blocking context */
if (force_nonblock)
return -EAGAIN;
ret = vfs_fsync_range(req->file, req->sync.off,
end > 0 ? end : LLONG_MAX,
req->sync.flags & IORING_FSYNC_DATASYNC);
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
static int io_fallocate_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
if (sqe->ioprio || sqe->buf_index || sqe->rw_flags)
return -EINVAL;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
req->sync.off = READ_ONCE(sqe->off);
req->sync.len = READ_ONCE(sqe->addr);
req->sync.mode = READ_ONCE(sqe->len);
return 0;
}
static int io_fallocate(struct io_kiocb *req, bool force_nonblock)
{
int ret;
/* fallocate always requiring blocking context */
if (force_nonblock)
return -EAGAIN;
ret = vfs_fallocate(req->file, req->sync.mode, req->sync.off,
req->sync.len);
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
static int __io_openat_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
const char __user *fname;
int ret;
if (unlikely(sqe->ioprio || sqe->buf_index))
return -EINVAL;
if (unlikely(req->flags & REQ_F_FIXED_FILE))
return -EBADF;
/* open.how should be already initialised */
if (!(req->open.how.flags & O_PATH) && force_o_largefile())
req->open.how.flags |= O_LARGEFILE;
req->open.dfd = READ_ONCE(sqe->fd);
fname = u64_to_user_ptr(READ_ONCE(sqe->addr));
req->open.filename = getname(fname);
if (IS_ERR(req->open.filename)) {
ret = PTR_ERR(req->open.filename);
req->open.filename = NULL;
return ret;
}
req->open.nofile = rlimit(RLIMIT_NOFILE);
req->open.ignore_nonblock = false;
req->flags |= REQ_F_NEED_CLEANUP;
return 0;
}
static int io_openat_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
u64 flags, mode;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
mode = READ_ONCE(sqe->len);
flags = READ_ONCE(sqe->open_flags);
req->open.how = build_open_how(flags, mode);
return __io_openat_prep(req, sqe);
}
static int io_openat2_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct open_how __user *how;
size_t len;
int ret;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
how = u64_to_user_ptr(READ_ONCE(sqe->addr2));
len = READ_ONCE(sqe->len);
if (len < OPEN_HOW_SIZE_VER0)
return -EINVAL;
ret = copy_struct_from_user(&req->open.how, sizeof(req->open.how), how,
len);
if (ret)
return ret;
return __io_openat_prep(req, sqe);
}
static int io_openat2(struct io_kiocb *req, bool force_nonblock)
{
struct open_flags op;
struct file *file;
int ret;
if (force_nonblock && !req->open.ignore_nonblock)
return -EAGAIN;
ret = build_open_flags(&req->open.how, &op);
if (ret)
goto err;
ret = __get_unused_fd_flags(req->open.how.flags, req->open.nofile);
if (ret < 0)
goto err;
file = do_filp_open(req->open.dfd, req->open.filename, &op);
if (IS_ERR(file)) {
put_unused_fd(ret);
ret = PTR_ERR(file);
/*
* A work-around to ensure that /proc/self works that way
* that it should - if we get -EOPNOTSUPP back, then assume
* that proc_self_get_link() failed us because we're in async
* context. We should be safe to retry this from the task
* itself with force_nonblock == false set, as it should not
* block on lookup. Would be nice to know this upfront and
* avoid the async dance, but doesn't seem feasible.
*/
if (ret == -EOPNOTSUPP && io_wq_current_is_worker()) {
req->open.ignore_nonblock = true;
refcount_inc(&req->refs);
io_req_task_queue(req);
return 0;
}
} else {
fsnotify_open(file);
fd_install(ret, file);
}
err:
putname(req->open.filename);
req->flags &= ~REQ_F_NEED_CLEANUP;
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
static int io_openat(struct io_kiocb *req, bool force_nonblock)
{
return io_openat2(req, force_nonblock);
}
static int io_remove_buffers_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
struct io_provide_buf *p = &req->pbuf;
u64 tmp;
if (sqe->ioprio || sqe->rw_flags || sqe->addr || sqe->len || sqe->off)
return -EINVAL;
tmp = READ_ONCE(sqe->fd);
if (!tmp || tmp > USHRT_MAX)
return -EINVAL;
memset(p, 0, sizeof(*p));
p->nbufs = tmp;
p->bgid = READ_ONCE(sqe->buf_group);
return 0;
}
static int __io_remove_buffers(struct io_ring_ctx *ctx, struct io_buffer *buf,
int bgid, unsigned nbufs)
{
unsigned i = 0;
/* shouldn't happen */
if (!nbufs)
return 0;
/* the head kbuf is the list itself */
while (!list_empty(&buf->list)) {
struct io_buffer *nxt;
nxt = list_first_entry(&buf->list, struct io_buffer, list);
list_del(&nxt->list);
kfree(nxt);
if (++i == nbufs)
return i;
}
i++;
kfree(buf);
idr_remove(&ctx->io_buffer_idr, bgid);
return i;
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_remove_buffers(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
struct io_provide_buf *p = &req->pbuf;
struct io_ring_ctx *ctx = req->ctx;
struct io_buffer *head;
int ret = 0;
io_ring_submit_lock(ctx, !force_nonblock);
lockdep_assert_held(&ctx->uring_lock);
ret = -ENOENT;
head = idr_find(&ctx->io_buffer_idr, p->bgid);
if (head)
ret = __io_remove_buffers(ctx, head, p->bgid, p->nbufs);
if (ret < 0)
req_set_fail_links(req);
/* need to hold the lock to complete IOPOLL requests */
if (ctx->flags & IORING_SETUP_IOPOLL) {
__io_req_complete(req, ret, 0, cs);
io_ring_submit_unlock(ctx, !force_nonblock);
} else {
io_ring_submit_unlock(ctx, !force_nonblock);
__io_req_complete(req, ret, 0, cs);
}
return 0;
}
static int io_provide_buffers_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
struct io_provide_buf *p = &req->pbuf;
u64 tmp;
if (sqe->ioprio || sqe->rw_flags)
return -EINVAL;
tmp = READ_ONCE(sqe->fd);
if (!tmp || tmp > USHRT_MAX)
return -E2BIG;
p->nbufs = tmp;
p->addr = READ_ONCE(sqe->addr);
p->len = READ_ONCE(sqe->len);
if (!access_ok(u64_to_user_ptr(p->addr), (p->len * p->nbufs)))
return -EFAULT;
p->bgid = READ_ONCE(sqe->buf_group);
tmp = READ_ONCE(sqe->off);
if (tmp > USHRT_MAX)
return -E2BIG;
p->bid = tmp;
return 0;
}
static int io_add_buffers(struct io_provide_buf *pbuf, struct io_buffer **head)
{
struct io_buffer *buf;
u64 addr = pbuf->addr;
int i, bid = pbuf->bid;
for (i = 0; i < pbuf->nbufs; i++) {
buf = kmalloc(sizeof(*buf), GFP_KERNEL);
if (!buf)
break;
buf->addr = addr;
buf->len = pbuf->len;
buf->bid = bid;
addr += pbuf->len;
bid++;
if (!*head) {
INIT_LIST_HEAD(&buf->list);
*head = buf;
} else {
list_add_tail(&buf->list, &(*head)->list);
}
}
return i ? i : -ENOMEM;
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_provide_buffers(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
struct io_provide_buf *p = &req->pbuf;
struct io_ring_ctx *ctx = req->ctx;
struct io_buffer *head, *list;
int ret = 0;
io_ring_submit_lock(ctx, !force_nonblock);
lockdep_assert_held(&ctx->uring_lock);
list = head = idr_find(&ctx->io_buffer_idr, p->bgid);
ret = io_add_buffers(p, &head);
if (ret < 0)
goto out;
if (!list) {
ret = idr_alloc(&ctx->io_buffer_idr, head, p->bgid, p->bgid + 1,
GFP_KERNEL);
if (ret < 0) {
__io_remove_buffers(ctx, head, p->bgid, -1U);
goto out;
}
}
out:
if (ret < 0)
req_set_fail_links(req);
/* need to hold the lock to complete IOPOLL requests */
if (ctx->flags & IORING_SETUP_IOPOLL) {
__io_req_complete(req, ret, 0, cs);
io_ring_submit_unlock(ctx, !force_nonblock);
} else {
io_ring_submit_unlock(ctx, !force_nonblock);
__io_req_complete(req, ret, 0, cs);
}
return 0;
}
static int io_epoll_ctl_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
#if defined(CONFIG_EPOLL)
if (sqe->ioprio || sqe->buf_index)
return -EINVAL;
if (unlikely(req->ctx->flags & (IORING_SETUP_IOPOLL | IORING_SETUP_SQPOLL)))
return -EINVAL;
req->epoll.epfd = READ_ONCE(sqe->fd);
req->epoll.op = READ_ONCE(sqe->len);
req->epoll.fd = READ_ONCE(sqe->off);
if (ep_op_has_event(req->epoll.op)) {
struct epoll_event __user *ev;
ev = u64_to_user_ptr(READ_ONCE(sqe->addr));
if (copy_from_user(&req->epoll.event, ev, sizeof(*ev)))
return -EFAULT;
}
return 0;
#else
return -EOPNOTSUPP;
#endif
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_epoll_ctl(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
#if defined(CONFIG_EPOLL)
struct io_epoll *ie = &req->epoll;
int ret;
ret = do_epoll_ctl(ie->epfd, ie->op, ie->fd, &ie->event, force_nonblock);
if (force_nonblock && ret == -EAGAIN)
return -EAGAIN;
if (ret < 0)
req_set_fail_links(req);
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, ret, 0, cs);
return 0;
#else
return -EOPNOTSUPP;
#endif
}
static int io_madvise_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
#if defined(CONFIG_ADVISE_SYSCALLS) && defined(CONFIG_MMU)
if (sqe->ioprio || sqe->buf_index || sqe->off)
return -EINVAL;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
req->madvise.addr = READ_ONCE(sqe->addr);
req->madvise.len = READ_ONCE(sqe->len);
req->madvise.advice = READ_ONCE(sqe->fadvise_advice);
return 0;
#else
return -EOPNOTSUPP;
#endif
}
static int io_madvise(struct io_kiocb *req, bool force_nonblock)
{
#if defined(CONFIG_ADVISE_SYSCALLS) && defined(CONFIG_MMU)
struct io_madvise *ma = &req->madvise;
int ret;
if (force_nonblock)
return -EAGAIN;
mm/madvise: pass mm to do_madvise Patch series "introduce memory hinting API for external process", v9. Now, we have MADV_PAGEOUT and MADV_COLD as madvise hinting API. With that, application could give hints to kernel what memory range are preferred to be reclaimed. However, in some platform(e.g., Android), the information required to make the hinting decision is not known to the app. Instead, it is known to a centralized userspace daemon(e.g., ActivityManagerService), and that daemon must be able to initiate reclaim on its own without any app involvement. To solve the concern, this patch introduces new syscall - process_madvise(2). Bascially, it's same with madvise(2) syscall but it has some differences. 1. It needs pidfd of target process to provide the hint 2. It supports only MADV_{COLD|PAGEOUT|MERGEABLE|UNMEREABLE} at this moment. Other hints in madvise will be opened when there are explicit requests from community to prevent unexpected bugs we couldn't support. 3. Only privileged processes can do something for other process's address space. For more detail of the new API, please see "mm: introduce external memory hinting API" description in this patchset. This patch (of 3): In upcoming patches, do_madvise will be called from external process context so we shouldn't asssume "current" is always hinted process's task_struct. Furthermore, we must not access mm_struct via task->mm, but obtain it via access_mm() once (in the following patch) and only use that pointer [1], so pass it to do_madvise() as well. Note the vma->vm_mm pointers are safe, so we can use them further down the call stack. And let's pass current->mm as arguments of do_madvise so it shouldn't change existing behavior but prepare next patch to make review easy. [vbabka@suse.cz: changelog tweak] [minchan@kernel.org: use current->mm for io_uring] Link: http://lkml.kernel.org/r/20200423145215.72666-1-minchan@kernel.org [akpm@linux-foundation.org: fix it for upstream changes] [akpm@linux-foundation.org: whoops] [rdunlap@infradead.org: add missing includes] Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jann Horn <jannh@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Daniel Colascione <dancol@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Dias <joaodias@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: SeongJae Park <sj38.park@gmail.com> Cc: Christian Brauner <christian@brauner.io> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: <linux-man@vger.kernel.org> Link: https://lkml.kernel.org/r/20200901000633.1920247-1-minchan@kernel.org Link: http://lkml.kernel.org/r/20200622192900.22757-1-minchan@kernel.org Link: http://lkml.kernel.org/r/20200302193630.68771-2-minchan@kernel.org Link: http://lkml.kernel.org/r/20200622192900.22757-2-minchan@kernel.org Link: https://lkml.kernel.org/r/20200901000633.1920247-2-minchan@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-18 07:14:50 +08:00
ret = do_madvise(current->mm, ma->addr, ma->len, ma->advice);
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
#else
return -EOPNOTSUPP;
#endif
}
static int io_fadvise_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
if (sqe->ioprio || sqe->buf_index || sqe->addr)
return -EINVAL;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
req->fadvise.offset = READ_ONCE(sqe->off);
req->fadvise.len = READ_ONCE(sqe->len);
req->fadvise.advice = READ_ONCE(sqe->fadvise_advice);
return 0;
}
static int io_fadvise(struct io_kiocb *req, bool force_nonblock)
{
struct io_fadvise *fa = &req->fadvise;
int ret;
if (force_nonblock) {
switch (fa->advice) {
case POSIX_FADV_NORMAL:
case POSIX_FADV_RANDOM:
case POSIX_FADV_SEQUENTIAL:
break;
default:
return -EAGAIN;
}
}
ret = vfs_fadvise(req->file, fa->offset, fa->len, fa->advice);
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
static int io_statx_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
if (unlikely(req->ctx->flags & (IORING_SETUP_IOPOLL | IORING_SETUP_SQPOLL)))
return -EINVAL;
if (sqe->ioprio || sqe->buf_index)
return -EINVAL;
if (req->flags & REQ_F_FIXED_FILE)
return -EBADF;
req->statx.dfd = READ_ONCE(sqe->fd);
req->statx.mask = READ_ONCE(sqe->len);
req->statx.filename = u64_to_user_ptr(READ_ONCE(sqe->addr));
req->statx.buffer = u64_to_user_ptr(READ_ONCE(sqe->addr2));
req->statx.flags = READ_ONCE(sqe->statx_flags);
return 0;
}
static int io_statx(struct io_kiocb *req, bool force_nonblock)
{
struct io_statx *ctx = &req->statx;
int ret;
if (force_nonblock) {
/* only need file table for an actual valid fd */
if (ctx->dfd == -1 || ctx->dfd == AT_FDCWD)
req->flags |= REQ_F_NO_FILE_TABLE;
return -EAGAIN;
}
ret = do_statx(ctx->dfd, ctx->filename, ctx->flags, ctx->mask,
ctx->buffer);
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
static int io_close_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
/*
* If we queue this for async, it must not be cancellable. That would
* leave the 'file' in an undeterminate state, and here need to modify
* io_wq_work.flags, so initialize io_wq_work firstly.
*/
io_req_init_async(req);
req->work.flags |= IO_WQ_WORK_NO_CANCEL;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
if (sqe->ioprio || sqe->off || sqe->addr || sqe->len ||
sqe->rw_flags || sqe->buf_index)
return -EINVAL;
if (req->flags & REQ_F_FIXED_FILE)
return -EBADF;
req->close.fd = READ_ONCE(sqe->fd);
if ((req->file && req->file->f_op == &io_uring_fops))
return -EBADF;
req->close.put_file = NULL;
return 0;
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_close(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
struct io_close *close = &req->close;
int ret;
/* might be already done during nonblock submission */
if (!close->put_file) {
ret = close_fd_get_file(close->fd, &close->put_file);
if (ret < 0)
return (ret == -ENOENT) ? -EBADF : ret;
}
/* if the file has a flush method, be safe and punt to async */
if (close->put_file->f_op->flush && force_nonblock) {
/* was never set, but play safe */
req->flags &= ~REQ_F_NOWAIT;
/* avoid grabbing files - we don't need the files */
req->flags |= REQ_F_NO_FILE_TABLE;
return -EAGAIN;
}
/* No ->flush() or already async, safely close from here */
ret = filp_close(close->put_file, req->work.identity->files);
if (ret < 0)
req_set_fail_links(req);
fput(close->put_file);
close->put_file = NULL;
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, ret, 0, cs);
return 0;
}
static int io_prep_sfr(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_ring_ctx *ctx = req->ctx;
if (!req->file)
return -EBADF;
if (unlikely(ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
if (unlikely(sqe->addr || sqe->ioprio || sqe->buf_index))
return -EINVAL;
req->sync.off = READ_ONCE(sqe->off);
req->sync.len = READ_ONCE(sqe->len);
req->sync.flags = READ_ONCE(sqe->sync_range_flags);
return 0;
}
static int io_sync_file_range(struct io_kiocb *req, bool force_nonblock)
{
int ret;
/* sync_file_range always requires a blocking context */
if (force_nonblock)
return -EAGAIN;
ret = sync_file_range(req->file, req->sync.off, req->sync.len,
req->sync.flags);
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
#if defined(CONFIG_NET)
static int io_setup_async_msg(struct io_kiocb *req,
struct io_async_msghdr *kmsg)
{
struct io_async_msghdr *async_msg = req->async_data;
if (async_msg)
return -EAGAIN;
if (io_alloc_async_data(req)) {
if (kmsg->iov != kmsg->fast_iov)
kfree(kmsg->iov);
return -ENOMEM;
}
async_msg = req->async_data;
req->flags |= REQ_F_NEED_CLEANUP;
memcpy(async_msg, kmsg, sizeof(*kmsg));
return -EAGAIN;
}
static int io_sendmsg_copy_hdr(struct io_kiocb *req,
struct io_async_msghdr *iomsg)
{
iomsg->iov = iomsg->fast_iov;
iomsg->msg.msg_name = &iomsg->addr;
return sendmsg_copy_msghdr(&iomsg->msg, req->sr_msg.umsg,
req->sr_msg.msg_flags, &iomsg->iov);
}
static int io_sendmsg_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_async_msghdr *async_msg = req->async_data;
struct io_sr_msg *sr = &req->sr_msg;
int ret;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
sr->msg_flags = READ_ONCE(sqe->msg_flags);
sr->umsg = u64_to_user_ptr(READ_ONCE(sqe->addr));
sr->len = READ_ONCE(sqe->len);
#ifdef CONFIG_COMPAT
if (req->ctx->compat)
sr->msg_flags |= MSG_CMSG_COMPAT;
#endif
if (!async_msg || !io_op_defs[req->opcode].needs_async_data)
return 0;
ret = io_sendmsg_copy_hdr(req, async_msg);
if (!ret)
req->flags |= REQ_F_NEED_CLEANUP;
return ret;
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_sendmsg(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
struct io_async_msghdr iomsg, *kmsg;
struct socket *sock;
unsigned flags;
int ret;
sock = sock_from_file(req->file);
if (unlikely(!sock))
return -ENOTSOCK;
if (req->async_data) {
kmsg = req->async_data;
kmsg->msg.msg_name = &kmsg->addr;
/* if iov is set, it's allocated already */
if (!kmsg->iov)
kmsg->iov = kmsg->fast_iov;
kmsg->msg.msg_iter.iov = kmsg->iov;
} else {
ret = io_sendmsg_copy_hdr(req, &iomsg);
if (ret)
return ret;
kmsg = &iomsg;
}
flags = req->sr_msg.msg_flags;
if (flags & MSG_DONTWAIT)
req->flags |= REQ_F_NOWAIT;
else if (force_nonblock)
flags |= MSG_DONTWAIT;
ret = __sys_sendmsg_sock(sock, &kmsg->msg, flags);
if (force_nonblock && ret == -EAGAIN)
return io_setup_async_msg(req, kmsg);
if (ret == -ERESTARTSYS)
ret = -EINTR;
if (kmsg->iov != kmsg->fast_iov)
kfree(kmsg->iov);
req->flags &= ~REQ_F_NEED_CLEANUP;
if (ret < 0)
req_set_fail_links(req);
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, ret, 0, cs);
return 0;
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_send(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
struct io_sr_msg *sr = &req->sr_msg;
struct msghdr msg;
struct iovec iov;
struct socket *sock;
unsigned flags;
int ret;
sock = sock_from_file(req->file);
if (unlikely(!sock))
return -ENOTSOCK;
ret = import_single_range(WRITE, sr->buf, sr->len, &iov, &msg.msg_iter);
if (unlikely(ret))
return ret;
msg.msg_name = NULL;
msg.msg_control = NULL;
msg.msg_controllen = 0;
msg.msg_namelen = 0;
flags = req->sr_msg.msg_flags;
if (flags & MSG_DONTWAIT)
req->flags |= REQ_F_NOWAIT;
else if (force_nonblock)
flags |= MSG_DONTWAIT;
msg.msg_flags = flags;
ret = sock_sendmsg(sock, &msg);
if (force_nonblock && ret == -EAGAIN)
return -EAGAIN;
if (ret == -ERESTARTSYS)
ret = -EINTR;
if (ret < 0)
req_set_fail_links(req);
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, ret, 0, cs);
return 0;
}
static int __io_recvmsg_copy_hdr(struct io_kiocb *req,
struct io_async_msghdr *iomsg)
{
struct io_sr_msg *sr = &req->sr_msg;
struct iovec __user *uiov;
size_t iov_len;
int ret;
ret = __copy_msghdr_from_user(&iomsg->msg, sr->umsg,
&iomsg->uaddr, &uiov, &iov_len);
if (ret)
return ret;
if (req->flags & REQ_F_BUFFER_SELECT) {
if (iov_len > 1)
return -EINVAL;
if (copy_from_user(iomsg->iov, uiov, sizeof(*uiov)))
return -EFAULT;
sr->len = iomsg->iov[0].iov_len;
iov_iter_init(&iomsg->msg.msg_iter, READ, iomsg->iov, 1,
sr->len);
iomsg->iov = NULL;
} else {
ret = __import_iovec(READ, uiov, iov_len, UIO_FASTIOV,
&iomsg->iov, &iomsg->msg.msg_iter,
false);
if (ret > 0)
ret = 0;
}
return ret;
}
#ifdef CONFIG_COMPAT
static int __io_compat_recvmsg_copy_hdr(struct io_kiocb *req,
struct io_async_msghdr *iomsg)
{
struct compat_msghdr __user *msg_compat;
struct io_sr_msg *sr = &req->sr_msg;
struct compat_iovec __user *uiov;
compat_uptr_t ptr;
compat_size_t len;
int ret;
msg_compat = (struct compat_msghdr __user *) sr->umsg;
ret = __get_compat_msghdr(&iomsg->msg, msg_compat, &iomsg->uaddr,
&ptr, &len);
if (ret)
return ret;
uiov = compat_ptr(ptr);
if (req->flags & REQ_F_BUFFER_SELECT) {
compat_ssize_t clen;
if (len > 1)
return -EINVAL;
if (!access_ok(uiov, sizeof(*uiov)))
return -EFAULT;
if (__get_user(clen, &uiov->iov_len))
return -EFAULT;
if (clen < 0)
return -EINVAL;
sr->len = clen;
iomsg->iov[0].iov_len = clen;
iomsg->iov = NULL;
} else {
ret = __import_iovec(READ, (struct iovec __user *)uiov, len,
UIO_FASTIOV, &iomsg->iov,
&iomsg->msg.msg_iter, true);
if (ret < 0)
return ret;
}
return 0;
}
#endif
static int io_recvmsg_copy_hdr(struct io_kiocb *req,
struct io_async_msghdr *iomsg)
{
iomsg->msg.msg_name = &iomsg->addr;
iomsg->iov = iomsg->fast_iov;
#ifdef CONFIG_COMPAT
if (req->ctx->compat)
return __io_compat_recvmsg_copy_hdr(req, iomsg);
#endif
return __io_recvmsg_copy_hdr(req, iomsg);
}
static struct io_buffer *io_recv_buffer_select(struct io_kiocb *req,
bool needs_lock)
{
struct io_sr_msg *sr = &req->sr_msg;
struct io_buffer *kbuf;
kbuf = io_buffer_select(req, &sr->len, sr->bgid, sr->kbuf, needs_lock);
if (IS_ERR(kbuf))
return kbuf;
sr->kbuf = kbuf;
req->flags |= REQ_F_BUFFER_SELECTED;
return kbuf;
}
static inline unsigned int io_put_recv_kbuf(struct io_kiocb *req)
{
return io_put_kbuf(req, req->sr_msg.kbuf);
}
static int io_recvmsg_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
struct io_async_msghdr *async_msg = req->async_data;
struct io_sr_msg *sr = &req->sr_msg;
int ret;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
sr->msg_flags = READ_ONCE(sqe->msg_flags);
sr->umsg = u64_to_user_ptr(READ_ONCE(sqe->addr));
sr->len = READ_ONCE(sqe->len);
sr->bgid = READ_ONCE(sqe->buf_group);
#ifdef CONFIG_COMPAT
if (req->ctx->compat)
sr->msg_flags |= MSG_CMSG_COMPAT;
#endif
if (!async_msg || !io_op_defs[req->opcode].needs_async_data)
return 0;
ret = io_recvmsg_copy_hdr(req, async_msg);
if (!ret)
req->flags |= REQ_F_NEED_CLEANUP;
return ret;
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_recvmsg(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
struct io_async_msghdr iomsg, *kmsg;
struct socket *sock;
struct io_buffer *kbuf;
unsigned flags;
int ret, cflags = 0;
sock = sock_from_file(req->file);
if (unlikely(!sock))
return -ENOTSOCK;
if (req->async_data) {
kmsg = req->async_data;
kmsg->msg.msg_name = &kmsg->addr;
/* if iov is set, it's allocated already */
if (!kmsg->iov)
kmsg->iov = kmsg->fast_iov;
kmsg->msg.msg_iter.iov = kmsg->iov;
} else {
ret = io_recvmsg_copy_hdr(req, &iomsg);
if (ret)
return ret;
kmsg = &iomsg;
}
if (req->flags & REQ_F_BUFFER_SELECT) {
kbuf = io_recv_buffer_select(req, !force_nonblock);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
kmsg->fast_iov[0].iov_base = u64_to_user_ptr(kbuf->addr);
iov_iter_init(&kmsg->msg.msg_iter, READ, kmsg->iov,
1, req->sr_msg.len);
}
flags = req->sr_msg.msg_flags;
if (flags & MSG_DONTWAIT)
req->flags |= REQ_F_NOWAIT;
else if (force_nonblock)
flags |= MSG_DONTWAIT;
ret = __sys_recvmsg_sock(sock, &kmsg->msg, req->sr_msg.umsg,
kmsg->uaddr, flags);
if (force_nonblock && ret == -EAGAIN)
return io_setup_async_msg(req, kmsg);
if (ret == -ERESTARTSYS)
ret = -EINTR;
if (req->flags & REQ_F_BUFFER_SELECTED)
cflags = io_put_recv_kbuf(req);
if (kmsg->iov != kmsg->fast_iov)
kfree(kmsg->iov);
req->flags &= ~REQ_F_NEED_CLEANUP;
if (ret < 0)
req_set_fail_links(req);
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, ret, cflags, cs);
return 0;
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_recv(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
struct io_buffer *kbuf;
struct io_sr_msg *sr = &req->sr_msg;
struct msghdr msg;
void __user *buf = sr->buf;
struct socket *sock;
struct iovec iov;
unsigned flags;
int ret, cflags = 0;
sock = sock_from_file(req->file);
if (unlikely(!sock))
return -ENOTSOCK;
if (req->flags & REQ_F_BUFFER_SELECT) {
kbuf = io_recv_buffer_select(req, !force_nonblock);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
buf = u64_to_user_ptr(kbuf->addr);
}
ret = import_single_range(READ, buf, sr->len, &iov, &msg.msg_iter);
if (unlikely(ret))
goto out_free;
msg.msg_name = NULL;
msg.msg_control = NULL;
msg.msg_controllen = 0;
msg.msg_namelen = 0;
msg.msg_iocb = NULL;
msg.msg_flags = 0;
flags = req->sr_msg.msg_flags;
if (flags & MSG_DONTWAIT)
req->flags |= REQ_F_NOWAIT;
else if (force_nonblock)
flags |= MSG_DONTWAIT;
ret = sock_recvmsg(sock, &msg, flags);
if (force_nonblock && ret == -EAGAIN)
return -EAGAIN;
if (ret == -ERESTARTSYS)
ret = -EINTR;
out_free:
if (req->flags & REQ_F_BUFFER_SELECTED)
cflags = io_put_recv_kbuf(req);
if (ret < 0)
req_set_fail_links(req);
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, ret, cflags, cs);
return 0;
}
static int io_accept_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_accept *accept = &req->accept;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
if (sqe->ioprio || sqe->len || sqe->buf_index)
return -EINVAL;
accept->addr = u64_to_user_ptr(READ_ONCE(sqe->addr));
accept->addr_len = u64_to_user_ptr(READ_ONCE(sqe->addr2));
accept->flags = READ_ONCE(sqe->accept_flags);
accept->nofile = rlimit(RLIMIT_NOFILE);
return 0;
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_accept(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
struct io_accept *accept = &req->accept;
unsigned int file_flags = force_nonblock ? O_NONBLOCK : 0;
int ret;
if (req->file->f_flags & O_NONBLOCK)
req->flags |= REQ_F_NOWAIT;
ret = __sys_accept4_file(req->file, file_flags, accept->addr,
accept->addr_len, accept->flags,
accept->nofile);
if (ret == -EAGAIN && force_nonblock)
return -EAGAIN;
if (ret < 0) {
if (ret == -ERESTARTSYS)
ret = -EINTR;
req_set_fail_links(req);
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, ret, 0, cs);
return 0;
}
static int io_connect_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_connect *conn = &req->connect;
struct io_async_connect *io = req->async_data;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
if (sqe->ioprio || sqe->len || sqe->buf_index || sqe->rw_flags)
return -EINVAL;
conn->addr = u64_to_user_ptr(READ_ONCE(sqe->addr));
conn->addr_len = READ_ONCE(sqe->addr2);
if (!io)
return 0;
return move_addr_to_kernel(conn->addr, conn->addr_len,
&io->address);
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_connect(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
struct io_async_connect __io, *io;
unsigned file_flags;
int ret;
if (req->async_data) {
io = req->async_data;
} else {
ret = move_addr_to_kernel(req->connect.addr,
req->connect.addr_len,
&__io.address);
if (ret)
goto out;
io = &__io;
}
file_flags = force_nonblock ? O_NONBLOCK : 0;
ret = __sys_connect_file(req->file, &io->address,
req->connect.addr_len, file_flags);
if ((ret == -EAGAIN || ret == -EINPROGRESS) && force_nonblock) {
if (req->async_data)
return -EAGAIN;
if (io_alloc_async_data(req)) {
ret = -ENOMEM;
goto out;
}
io = req->async_data;
memcpy(req->async_data, &__io, sizeof(__io));
return -EAGAIN;
}
if (ret == -ERESTARTSYS)
ret = -EINTR;
out:
if (ret < 0)
req_set_fail_links(req);
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, ret, 0, cs);
return 0;
}
#else /* !CONFIG_NET */
static int io_sendmsg_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
return -EOPNOTSUPP;
}
static int io_sendmsg(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
return -EOPNOTSUPP;
}
static int io_send(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
return -EOPNOTSUPP;
}
static int io_recvmsg_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
return -EOPNOTSUPP;
}
static int io_recvmsg(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
return -EOPNOTSUPP;
}
static int io_recv(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
return -EOPNOTSUPP;
}
static int io_accept_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
return -EOPNOTSUPP;
}
static int io_accept(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
return -EOPNOTSUPP;
}
static int io_connect_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
return -EOPNOTSUPP;
}
static int io_connect(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
return -EOPNOTSUPP;
}
#endif /* CONFIG_NET */
struct io_poll_table {
struct poll_table_struct pt;
struct io_kiocb *req;
int error;
};
static int __io_async_wake(struct io_kiocb *req, struct io_poll_iocb *poll,
__poll_t mask, task_work_func_t func)
{
int ret;
/* for instances that support it check for an event match first: */
if (mask && !(mask & poll->events))
return 0;
trace_io_uring_task_add(req->ctx, req->opcode, req->user_data, mask);
list_del_init(&poll->wait.entry);
req->result = mask;
init_task_work(&req->task_work, func);
percpu_ref_get(&req->ctx->refs);
/*
* If this fails, then the task is exiting. When a task exits, the
* work gets canceled, so just cancel this request as well instead
* of executing it. We can't safely execute it anyway, as we may not
* have the needed state needed for it anyway.
*/
ret = io_req_task_work_add(req);
if (unlikely(ret)) {
struct task_struct *tsk;
WRITE_ONCE(poll->canceled, true);
tsk = io_wq_get_task(req->ctx->io_wq);
task_work_add(tsk, &req->task_work, TWA_NONE);
wake_up_process(tsk);
}
return 1;
}
static bool io_poll_rewait(struct io_kiocb *req, struct io_poll_iocb *poll)
__acquires(&req->ctx->completion_lock)
{
struct io_ring_ctx *ctx = req->ctx;
if (!req->result && !READ_ONCE(poll->canceled)) {
struct poll_table_struct pt = { ._key = poll->events };
req->result = vfs_poll(req->file, &pt) & poll->events;
}
spin_lock_irq(&ctx->completion_lock);
if (!req->result && !READ_ONCE(poll->canceled)) {
add_wait_queue(poll->head, &poll->wait);
return true;
}
return false;
}
static struct io_poll_iocb *io_poll_get_double(struct io_kiocb *req)
{
/* pure poll stashes this in ->async_data, poll driven retry elsewhere */
if (req->opcode == IORING_OP_POLL_ADD)
return req->async_data;
return req->apoll->double_poll;
}
static struct io_poll_iocb *io_poll_get_single(struct io_kiocb *req)
{
if (req->opcode == IORING_OP_POLL_ADD)
return &req->poll;
return &req->apoll->poll;
}
static void io_poll_remove_double(struct io_kiocb *req)
{
struct io_poll_iocb *poll = io_poll_get_double(req);
lockdep_assert_held(&req->ctx->completion_lock);
if (poll && poll->head) {
struct wait_queue_head *head = poll->head;
spin_lock(&head->lock);
list_del_init(&poll->wait.entry);
if (poll->wait.private)
refcount_dec(&req->refs);
poll->head = NULL;
spin_unlock(&head->lock);
}
}
static void io_poll_complete(struct io_kiocb *req, __poll_t mask, int error)
{
struct io_ring_ctx *ctx = req->ctx;
io_poll_remove_double(req);
req->poll.done = true;
io_cqring_fill_event(req, error ? error : mangle_poll(mask));
io_commit_cqring(ctx);
}
static void io_poll_task_func(struct callback_head *cb)
{
struct io_kiocb *req = container_of(cb, struct io_kiocb, task_work);
struct io_ring_ctx *ctx = req->ctx;
struct io_kiocb *nxt;
if (io_poll_rewait(req, &req->poll)) {
spin_unlock_irq(&ctx->completion_lock);
} else {
hash_del(&req->hash_node);
io_poll_complete(req, req->result, 0);
spin_unlock_irq(&ctx->completion_lock);
nxt = io_put_req_find_next(req);
io_cqring_ev_posted(ctx);
if (nxt)
__io_req_task_submit(nxt);
}
percpu_ref_put(&ctx->refs);
}
static int io_poll_double_wake(struct wait_queue_entry *wait, unsigned mode,
int sync, void *key)
{
struct io_kiocb *req = wait->private;
struct io_poll_iocb *poll = io_poll_get_single(req);
__poll_t mask = key_to_poll(key);
/* for instances that support it check for an event match first: */
if (mask && !(mask & poll->events))
return 0;
io_uring: always delete double poll wait entry on match syzbot reports a crash with tty polling, which is using the double poll handling: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] CPU: 0 PID: 6874 Comm: syz-executor749 Not tainted 5.9.0-rc6-next-20200924-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:io_poll_get_single fs/io_uring.c:4778 [inline] RIP: 0010:io_poll_double_wake+0x51/0x510 fs/io_uring.c:4845 Code: fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 9e 03 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 5d 08 48 8d 7b 48 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 63 03 00 00 0f b6 6b 48 bf 06 00 00 RSP: 0018:ffffc90001c1fb70 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000004 RDX: 0000000000000009 RSI: ffffffff81d9b3ad RDI: 0000000000000048 RBP: dffffc0000000000 R08: ffff8880a3cac798 R09: ffffc90001c1fc60 R10: fffff52000383f73 R11: 0000000000000000 R12: 0000000000000004 R13: ffff8880a3cac798 R14: ffff8880a3cac7a0 R15: 0000000000000004 FS: 0000000001f98880(0000) GS:ffff8880ae400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f18886916c0 CR3: 0000000094c5a000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __wake_up_common+0x147/0x650 kernel/sched/wait.c:93 __wake_up_common_lock+0xd0/0x130 kernel/sched/wait.c:123 tty_ldisc_hangup+0x1cf/0x680 drivers/tty/tty_ldisc.c:735 __tty_hangup.part.0+0x403/0x870 drivers/tty/tty_io.c:625 __tty_hangup drivers/tty/tty_io.c:575 [inline] tty_vhangup+0x1d/0x30 drivers/tty/tty_io.c:698 pty_close+0x3f5/0x550 drivers/tty/pty.c:79 tty_release+0x455/0xf60 drivers/tty/tty_io.c:1679 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:165 [inline] exit_to_user_mode_prepare+0x1e2/0x1f0 kernel/entry/common.c:192 syscall_exit_to_user_mode+0x7a/0x2c0 kernel/entry/common.c:267 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x401210 which is due to a failure in removing the double poll wait entry if we hit a wakeup match. This can cause multiple invocations of the wakeup, which isn't safe. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+81b3883093f772addf6d@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28 22:38:54 +08:00
list_del_init(&wait->entry);
if (poll && poll->head) {
bool done;
spin_lock(&poll->head->lock);
done = list_empty(&poll->wait.entry);
if (!done)
list_del_init(&poll->wait.entry);
/* make sure double remove sees this as being gone */
wait->private = NULL;
spin_unlock(&poll->head->lock);
if (!done) {
/* use wait func handler, so it matches the rq type */
poll->wait.func(&poll->wait, mode, sync, key);
}
}
refcount_dec(&req->refs);
return 1;
}
static void io_init_poll_iocb(struct io_poll_iocb *poll, __poll_t events,
wait_queue_func_t wake_func)
{
poll->head = NULL;
poll->done = false;
poll->canceled = false;
poll->events = events;
INIT_LIST_HEAD(&poll->wait.entry);
init_waitqueue_func_entry(&poll->wait, wake_func);
}
static void __io_queue_proc(struct io_poll_iocb *poll, struct io_poll_table *pt,
struct wait_queue_head *head,
struct io_poll_iocb **poll_ptr)
{
struct io_kiocb *req = pt->req;
/*
* If poll->head is already set, it's because the file being polled
* uses multiple waitqueues for poll handling (eg one for read, one
* for write). Setup a separate io_poll_iocb if this happens.
*/
if (unlikely(poll->head)) {
struct io_poll_iocb *poll_one = poll;
/* already have a 2nd entry, fail a third attempt */
if (*poll_ptr) {
pt->error = -EINVAL;
return;
}
poll = kmalloc(sizeof(*poll), GFP_ATOMIC);
if (!poll) {
pt->error = -ENOMEM;
return;
}
io_init_poll_iocb(poll, poll_one->events, io_poll_double_wake);
refcount_inc(&req->refs);
poll->wait.private = req;
*poll_ptr = poll;
}
pt->error = 0;
poll->head = head;
if (poll->events & EPOLLEXCLUSIVE)
add_wait_queue_exclusive(head, &poll->wait);
else
add_wait_queue(head, &poll->wait);
}
static void io_async_queue_proc(struct file *file, struct wait_queue_head *head,
struct poll_table_struct *p)
{
struct io_poll_table *pt = container_of(p, struct io_poll_table, pt);
struct async_poll *apoll = pt->req->apoll;
__io_queue_proc(&apoll->poll, pt, head, &apoll->double_poll);
}
static void io_async_task_func(struct callback_head *cb)
{
struct io_kiocb *req = container_of(cb, struct io_kiocb, task_work);
struct async_poll *apoll = req->apoll;
struct io_ring_ctx *ctx = req->ctx;
trace_io_uring_task_run(req->ctx, req->opcode, req->user_data);
if (io_poll_rewait(req, &apoll->poll)) {
spin_unlock_irq(&ctx->completion_lock);
percpu_ref_put(&ctx->refs);
return;
}
/* If req is still hashed, it cannot have been canceled. Don't check. */
if (hash_hashed(&req->hash_node))
hash_del(&req->hash_node);
io_poll_remove_double(req);
spin_unlock_irq(&ctx->completion_lock);
if (!READ_ONCE(apoll->poll.canceled))
__io_req_task_submit(req);
else
__io_req_task_cancel(req, -ECANCELED);
percpu_ref_put(&ctx->refs);
kfree(apoll->double_poll);
kfree(apoll);
}
static int io_async_wake(struct wait_queue_entry *wait, unsigned mode, int sync,
void *key)
{
struct io_kiocb *req = wait->private;
struct io_poll_iocb *poll = &req->apoll->poll;
trace_io_uring_poll_wake(req->ctx, req->opcode, req->user_data,
key_to_poll(key));
return __io_async_wake(req, poll, key_to_poll(key), io_async_task_func);
}
static void io_poll_req_insert(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
struct hlist_head *list;
list = &ctx->cancel_hash[hash_long(req->user_data, ctx->cancel_hash_bits)];
hlist_add_head(&req->hash_node, list);
}
static __poll_t __io_arm_poll_handler(struct io_kiocb *req,
struct io_poll_iocb *poll,
struct io_poll_table *ipt, __poll_t mask,
wait_queue_func_t wake_func)
__acquires(&ctx->completion_lock)
{
struct io_ring_ctx *ctx = req->ctx;
bool cancel = false;
INIT_HLIST_NODE(&req->hash_node);
io_init_poll_iocb(poll, mask, wake_func);
poll->file = req->file;
poll->wait.private = req;
ipt->pt._key = mask;
ipt->req = req;
ipt->error = -EINVAL;
mask = vfs_poll(req->file, &ipt->pt) & poll->events;
spin_lock_irq(&ctx->completion_lock);
if (likely(poll->head)) {
spin_lock(&poll->head->lock);
if (unlikely(list_empty(&poll->wait.entry))) {
if (ipt->error)
cancel = true;
ipt->error = 0;
mask = 0;
}
if (mask || ipt->error)
list_del_init(&poll->wait.entry);
else if (cancel)
WRITE_ONCE(poll->canceled, true);
else if (!poll->done) /* actually waiting for an event */
io_poll_req_insert(req);
spin_unlock(&poll->head->lock);
}
return mask;
}
static bool io_arm_poll_handler(struct io_kiocb *req)
{
const struct io_op_def *def = &io_op_defs[req->opcode];
struct io_ring_ctx *ctx = req->ctx;
struct async_poll *apoll;
struct io_poll_table ipt;
__poll_t mask, ret;
int rw;
if (!req->file || !file_can_poll(req->file))
return false;
if (req->flags & REQ_F_POLLED)
return false;
if (def->pollin)
rw = READ;
else if (def->pollout)
rw = WRITE;
else
return false;
/* if we can't nonblock try, then no point in arming a poll handler */
if (!io_file_supports_async(req->file, rw))
return false;
apoll = kmalloc(sizeof(*apoll), GFP_ATOMIC);
if (unlikely(!apoll))
return false;
apoll->double_poll = NULL;
req->flags |= REQ_F_POLLED;
req->apoll = apoll;
mask = 0;
if (def->pollin)
mask |= POLLIN | POLLRDNORM;
if (def->pollout)
mask |= POLLOUT | POLLWRNORM;
/* If reading from MSG_ERRQUEUE using recvmsg, ignore POLLIN */
if ((req->opcode == IORING_OP_RECVMSG) &&
(req->sr_msg.msg_flags & MSG_ERRQUEUE))
mask &= ~POLLIN;
mask |= POLLERR | POLLPRI;
ipt.pt._qproc = io_async_queue_proc;
ret = __io_arm_poll_handler(req, &apoll->poll, &ipt, mask,
io_async_wake);
if (ret || ipt.error) {
io_poll_remove_double(req);
spin_unlock_irq(&ctx->completion_lock);
kfree(apoll->double_poll);
kfree(apoll);
return false;
}
spin_unlock_irq(&ctx->completion_lock);
trace_io_uring_poll_arm(ctx, req->opcode, req->user_data, mask,
apoll->poll.events);
return true;
}
static bool __io_poll_remove_one(struct io_kiocb *req,
struct io_poll_iocb *poll)
{
bool do_complete = false;
spin_lock(&poll->head->lock);
WRITE_ONCE(poll->canceled, true);
if (!list_empty(&poll->wait.entry)) {
list_del_init(&poll->wait.entry);
do_complete = true;
}
spin_unlock(&poll->head->lock);
hash_del(&req->hash_node);
return do_complete;
}
static bool io_poll_remove_one(struct io_kiocb *req)
{
bool do_complete;
io_poll_remove_double(req);
if (req->opcode == IORING_OP_POLL_ADD) {
do_complete = __io_poll_remove_one(req, &req->poll);
} else {
struct async_poll *apoll = req->apoll;
/* non-poll requests have submit ref still */
do_complete = __io_poll_remove_one(req, &apoll->poll);
if (do_complete) {
io_put_req(req);
kfree(apoll->double_poll);
kfree(apoll);
}
io_uring: restore req->work when canceling poll request When running liburing test case 'accept', I got below warning: RED: Invalid credentials RED: At include/linux/cred.h:285 RED: Specified credentials: 00000000d02474a0 RED: ->magic=4b, put_addr=000000005b4f46e9 RED: ->usage=-1699227648, subscr=-25693 RED: ->*uid = { 256,-25693,-25693,65534 } RED: ->*gid = { 0,-1925859360,-1789740800,-1827028688 } RED: ->security is 00000000258c136e eneral protection fault, probably for non-canonical address 0xdead4ead00000000: 0000 [#1] SMP PTI PU: 21 PID: 2037 Comm: accept Not tainted 5.6.0+ #318 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 IP: 0010:dump_invalid_creds+0x16f/0x184 ode: 48 8b 83 88 00 00 00 48 3d ff 0f 00 00 76 29 48 89 c2 81 e2 00 ff ff ff 48 81 fa 00 6b 6b 6b 74 17 5b 48 c7 c7 4b b1 10 8e 5d <8b> 50 04 41 5c 8b 30 41 5d e9 67 e3 04 00 5b 5d 41 5c 41 5d c3 0f SP: 0018:ffffacc1039dfb38 EFLAGS: 00010087 AX: dead4ead00000000 RBX: ffff9ba39319c100 RCX: 0000000000000007 DX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8e10b14b BP: ffffffff8e108476 R08: 0000000000000000 R09: 0000000000000001 10: 0000000000000000 R11: ffffacc1039df9e5 R12: 000000009552b900 13: 000000009319c130 R14: ffff9ba39319c100 R15: 0000000000000246 S: 00007f96b2bfc4c0(0000) GS:ffff9ba39f340000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 R2: 0000000000401870 CR3: 00000007db7a4000 CR4: 00000000000006e0 all Trace: __invalid_creds+0x48/0x4a __io_req_aux_free+0x2e8/0x3b0 ? io_poll_remove_one+0x2a/0x1d0 __io_free_req+0x18/0x200 io_free_req+0x31/0x350 io_poll_remove_one+0x17f/0x1d0 io_poll_cancel.isra.80+0x6c/0x80 io_async_find_and_cancel+0x111/0x120 io_issue_sqe+0x181/0x10e0 ? __lock_acquire+0x552/0xae0 ? lock_acquire+0x8e/0x310 ? fs_reclaim_acquire.part.97+0x5/0x30 __io_queue_sqe.part.100+0xc4/0x580 ? io_submit_sqes+0x751/0xbd0 ? rcu_read_lock_sched_held+0x32/0x40 io_submit_sqes+0x9ba/0xbd0 ? __x64_sys_io_uring_enter+0x2b2/0x460 ? __x64_sys_io_uring_enter+0xaf/0x460 ? find_held_lock+0x2d/0x90 ? __x64_sys_io_uring_enter+0x111/0x460 __x64_sys_io_uring_enter+0x2d7/0x460 do_syscall_64+0x5a/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xb3 After looking into codes, it turns out that this issue is because we didn't restore the req->work, which is changed in io_arm_poll_handler(), req->work is a union with below struct: struct { struct callback_head task_work; struct hlist_node hash_node; struct async_poll *apoll; }; If we forget to restore, members in struct io_wq_work would be invalid, restore the req->work to fix this issue. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Get rid of not needed 'need_restore' variable. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-12 14:50:54 +08:00
}
if (do_complete) {
io_cqring_fill_event(req, -ECANCELED);
io_commit_cqring(req->ctx);
req_set_fail_links(req);
io_put_req_deferred(req, 1);
}
return do_complete;
}
/*
* Returns true if we found and killed one or more poll requests
*/
static bool io_poll_remove_all(struct io_ring_ctx *ctx, struct task_struct *tsk,
struct files_struct *files)
{
struct hlist_node *tmp;
struct io_kiocb *req;
io_uring: only post events in io_poll_remove_all() if we completed some syzbot reports this crash: BUG: unable to handle page fault for address: ffffffffffffffe8 PGD f96e17067 P4D f96e17067 PUD f96e19067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 55 PID: 211750 Comm: trinity-c127 Tainted: G B L 5.7.0-rc1-next-20200413 #4 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 04/12/2017 RIP: 0010:__wake_up_common+0x98/0x290 el/sched/wait.c:87 Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10 RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8 RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8 RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000 R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8 FS: 00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0 Call Trace: __wake_up_common_lock+0xea/0x150 ommon_lock at kernel/sched/wait.c:124 ? __wake_up_common+0x290/0x290 ? lockdep_hardirqs_on+0x16/0x2c0 __wake_up+0x13/0x20 io_cqring_ev_posted+0x75/0xe0 v_posted at fs/io_uring.c:1160 io_ring_ctx_wait_and_kill+0x1c0/0x2f0 l at fs/io_uring.c:7305 io_uring_create+0xa8d/0x13b0 ? io_req_defer_prep+0x990/0x990 ? __kasan_check_write+0x14/0x20 io_uring_setup+0xb8/0x130 ? io_uring_create+0x13b0/0x13b0 ? check_flags.part.28+0x220/0x220 ? lockdep_hardirqs_on+0x16/0x2c0 __x64_sys_io_uring_setup+0x31/0x40 do_syscall_64+0xcc/0xaf0 ? syscall_return_slowpath+0x580/0x580 ? lockdep_hardirqs_off+0x1f/0x140 ? entry_SYSCALL_64_after_hwframe+0x3e/0xb3 ? trace_hardirqs_off_caller+0x3a/0x150 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x7fdcb9dd76ed Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6b 57 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe7fd4e4f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9 RAX: ffffffffffffffda RBX: 00000000000001a9 RCX: 00007fdcb9dd76ed RDX: fffffffffffffffc RSI: 0000000000000000 RDI: 0000000000005d54 RBP: 00000000000001a9 R08: 0000000e31d3caa7 R09: 0082400004004000 R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000002 R13: 00007fdcb842e058 R14: 00007fdcba4c46c0 R15: 00007fdcb842e000 Modules linked in: bridge stp llc nfnetlink cn brd vfat fat ext4 crc16 mbcache jbd2 loop kvm_intel kvm irqbypass intel_cstate intel_uncore dax_pmem intel_rapl_perf dax_pmem_core ip_tables x_tables xfs sd_mod tg3 firmware_class libphy hpsa scsi_transport_sas dm_mirror dm_region_hash dm_log dm_mod [last unloaded: binfmt_misc] CR2: ffffffffffffffe8 ---[ end trace f9502383d57e0e22 ]--- RIP: 0010:__wake_up_common+0x98/0x290 Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10 RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8 RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8 RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000 R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8 FS: 00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x29800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]— which is due to error injection (or allocation failure) preventing the rings from being setup. On shutdown, we attempt to remove any pending requests, and for poll request, we call io_cqring_ev_posted() when we've killed poll requests. However, since the rings aren't setup, we won't find any poll requests. Make the calling of io_cqring_ev_posted() dependent on actually having completed requests. This fixes this setup corner case, and removes spurious calls if we remove poll requests and don't find any. Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-14 07:05:14 +08:00
int posted = 0, i;
spin_lock_irq(&ctx->completion_lock);
for (i = 0; i < (1U << ctx->cancel_hash_bits); i++) {
struct hlist_head *list;
list = &ctx->cancel_hash[i];
hlist_for_each_entry_safe(req, tmp, list, hash_node) {
if (io_match_task(req, tsk, files))
posted += io_poll_remove_one(req);
}
}
spin_unlock_irq(&ctx->completion_lock);
io_uring: only post events in io_poll_remove_all() if we completed some syzbot reports this crash: BUG: unable to handle page fault for address: ffffffffffffffe8 PGD f96e17067 P4D f96e17067 PUD f96e19067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 55 PID: 211750 Comm: trinity-c127 Tainted: G B L 5.7.0-rc1-next-20200413 #4 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 04/12/2017 RIP: 0010:__wake_up_common+0x98/0x290 el/sched/wait.c:87 Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10 RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8 RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8 RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000 R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8 FS: 00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0 Call Trace: __wake_up_common_lock+0xea/0x150 ommon_lock at kernel/sched/wait.c:124 ? __wake_up_common+0x290/0x290 ? lockdep_hardirqs_on+0x16/0x2c0 __wake_up+0x13/0x20 io_cqring_ev_posted+0x75/0xe0 v_posted at fs/io_uring.c:1160 io_ring_ctx_wait_and_kill+0x1c0/0x2f0 l at fs/io_uring.c:7305 io_uring_create+0xa8d/0x13b0 ? io_req_defer_prep+0x990/0x990 ? __kasan_check_write+0x14/0x20 io_uring_setup+0xb8/0x130 ? io_uring_create+0x13b0/0x13b0 ? check_flags.part.28+0x220/0x220 ? lockdep_hardirqs_on+0x16/0x2c0 __x64_sys_io_uring_setup+0x31/0x40 do_syscall_64+0xcc/0xaf0 ? syscall_return_slowpath+0x580/0x580 ? lockdep_hardirqs_off+0x1f/0x140 ? entry_SYSCALL_64_after_hwframe+0x3e/0xb3 ? trace_hardirqs_off_caller+0x3a/0x150 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x7fdcb9dd76ed Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6b 57 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe7fd4e4f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9 RAX: ffffffffffffffda RBX: 00000000000001a9 RCX: 00007fdcb9dd76ed RDX: fffffffffffffffc RSI: 0000000000000000 RDI: 0000000000005d54 RBP: 00000000000001a9 R08: 0000000e31d3caa7 R09: 0082400004004000 R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000002 R13: 00007fdcb842e058 R14: 00007fdcba4c46c0 R15: 00007fdcb842e000 Modules linked in: bridge stp llc nfnetlink cn brd vfat fat ext4 crc16 mbcache jbd2 loop kvm_intel kvm irqbypass intel_cstate intel_uncore dax_pmem intel_rapl_perf dax_pmem_core ip_tables x_tables xfs sd_mod tg3 firmware_class libphy hpsa scsi_transport_sas dm_mirror dm_region_hash dm_log dm_mod [last unloaded: binfmt_misc] CR2: ffffffffffffffe8 ---[ end trace f9502383d57e0e22 ]--- RIP: 0010:__wake_up_common+0x98/0x290 Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10 RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8 RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8 RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000 R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8 FS: 00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x29800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]— which is due to error injection (or allocation failure) preventing the rings from being setup. On shutdown, we attempt to remove any pending requests, and for poll request, we call io_cqring_ev_posted() when we've killed poll requests. However, since the rings aren't setup, we won't find any poll requests. Make the calling of io_cqring_ev_posted() dependent on actually having completed requests. This fixes this setup corner case, and removes spurious calls if we remove poll requests and don't find any. Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-14 07:05:14 +08:00
if (posted)
io_cqring_ev_posted(ctx);
return posted != 0;
}
static int io_poll_cancel(struct io_ring_ctx *ctx, __u64 sqe_addr)
{
struct hlist_head *list;
struct io_kiocb *req;
list = &ctx->cancel_hash[hash_long(sqe_addr, ctx->cancel_hash_bits)];
hlist_for_each_entry(req, list, hash_node) {
if (sqe_addr != req->user_data)
continue;
if (io_poll_remove_one(req))
return 0;
return -EALREADY;
}
return -ENOENT;
}
static int io_poll_remove_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
if (sqe->ioprio || sqe->off || sqe->len || sqe->buf_index ||
sqe->poll_events)
return -EINVAL;
req->poll_remove.addr = READ_ONCE(sqe->addr);
return 0;
}
/*
* Find a running poll command that matches one specified in sqe->addr,
* and remove it if found.
*/
static int io_poll_remove(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
int ret;
spin_lock_irq(&ctx->completion_lock);
ret = io_poll_cancel(ctx, req->poll_remove.addr);
spin_unlock_irq(&ctx->completion_lock);
if (ret < 0)
req_set_fail_links(req);
io_req_complete(req, ret);
return 0;
}
static int io_poll_wake(struct wait_queue_entry *wait, unsigned mode, int sync,
void *key)
{
struct io_kiocb *req = wait->private;
struct io_poll_iocb *poll = &req->poll;
return __io_async_wake(req, poll, key_to_poll(key), io_poll_task_func);
}
static void io_poll_queue_proc(struct file *file, struct wait_queue_head *head,
struct poll_table_struct *p)
{
struct io_poll_table *pt = container_of(p, struct io_poll_table, pt);
__io_queue_proc(&pt->req->poll, pt, head, (struct io_poll_iocb **) &pt->req->async_data);
}
static int io_poll_add_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_poll_iocb *poll = &req->poll;
u32 events;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
if (sqe->addr || sqe->ioprio || sqe->off || sqe->len || sqe->buf_index)
return -EINVAL;
events = READ_ONCE(sqe->poll32_events);
#ifdef __BIG_ENDIAN
events = swahw32(events);
#endif
poll->events = demangle_poll(events) | EPOLLERR | EPOLLHUP |
(events & EPOLLEXCLUSIVE);
return 0;
}
static int io_poll_add(struct io_kiocb *req)
{
struct io_poll_iocb *poll = &req->poll;
struct io_ring_ctx *ctx = req->ctx;
struct io_poll_table ipt;
__poll_t mask;
ipt.pt._qproc = io_poll_queue_proc;
mask = __io_arm_poll_handler(req, &req->poll, &ipt, poll->events,
io_poll_wake);
io_uring: fix poll races This is a straight port of Al's fix for the aio poll implementation, since the io_uring version is heavily based on that. The below description is almost straight from that patch, just modified to fit the io_uring situation. io_poll() has to cope with several unpleasant problems: * requests that might stay around indefinitely need to be made visible for io_cancel(2); that must not be done to a request already completed, though. * in cases when ->poll() has placed us on a waitqueue, wakeup might have happened (and request completed) before ->poll() returns. * worse, in some early wakeup cases request might end up re-added into the queue later - we can't treat "woken up and currently not in the queue" as "it's not going to stick around indefinitely" * ... moreover, ->poll() might have decided not to put it on any queues to start with, and that needs to be distinguished from the previous case * ->poll() might have tried to put us on more than one queue. Only the first will succeed for io poll, so we might end up missing wakeups. OTOH, we might very well notice that only after the wakeup hits and request gets completed (all before ->poll() gets around to the second poll_wait()). In that case it's too late to decide that we have an error. req->woken was an attempt to deal with that. Unfortunately, it was broken. What we need to keep track of is not that wakeup has happened - the thing might come back after that. It's that async reference is already gone and won't come back, so we can't (and needn't) put the request on the list of cancellables. The easiest case is "request hadn't been put on any waitqueues"; we can tell by seeing NULL apt.head, and in that case there won't be anything async. We should either complete the request ourselves (if vfs_poll() reports anything of interest) or return an error. In all other cases we get exclusion with wakeups by grabbing the queue lock. If request is currently on queue and we have something interesting from vfs_poll(), we can steal it and complete the request ourselves. If it's on queue and vfs_poll() has not reported anything interesting, we either put it on the cancellable list, or, if we know that it hadn't been put on all queues ->poll() wanted it on, we steal it and return an error. If it's _not_ on queue, it's either been already dealt with (in which case we do nothing), or there's io_poll_complete_work() about to be executed. In that case we either put it on the cancellable list, or, if we know it hadn't been put on all queues ->poll() wanted it on, simulate what cancel would've done. Fixes: 221c5eb23382 ("io_uring: add support for IORING_OP_POLL") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-13 05:48:16 +08:00
if (mask) { /* no async, we'd stolen it */
ipt.error = 0;
io_poll_complete(req, mask, 0);
}
spin_unlock_irq(&ctx->completion_lock);
io_uring: fix poll races This is a straight port of Al's fix for the aio poll implementation, since the io_uring version is heavily based on that. The below description is almost straight from that patch, just modified to fit the io_uring situation. io_poll() has to cope with several unpleasant problems: * requests that might stay around indefinitely need to be made visible for io_cancel(2); that must not be done to a request already completed, though. * in cases when ->poll() has placed us on a waitqueue, wakeup might have happened (and request completed) before ->poll() returns. * worse, in some early wakeup cases request might end up re-added into the queue later - we can't treat "woken up and currently not in the queue" as "it's not going to stick around indefinitely" * ... moreover, ->poll() might have decided not to put it on any queues to start with, and that needs to be distinguished from the previous case * ->poll() might have tried to put us on more than one queue. Only the first will succeed for io poll, so we might end up missing wakeups. OTOH, we might very well notice that only after the wakeup hits and request gets completed (all before ->poll() gets around to the second poll_wait()). In that case it's too late to decide that we have an error. req->woken was an attempt to deal with that. Unfortunately, it was broken. What we need to keep track of is not that wakeup has happened - the thing might come back after that. It's that async reference is already gone and won't come back, so we can't (and needn't) put the request on the list of cancellables. The easiest case is "request hadn't been put on any waitqueues"; we can tell by seeing NULL apt.head, and in that case there won't be anything async. We should either complete the request ourselves (if vfs_poll() reports anything of interest) or return an error. In all other cases we get exclusion with wakeups by grabbing the queue lock. If request is currently on queue and we have something interesting from vfs_poll(), we can steal it and complete the request ourselves. If it's on queue and vfs_poll() has not reported anything interesting, we either put it on the cancellable list, or, if we know that it hadn't been put on all queues ->poll() wanted it on, we steal it and return an error. If it's _not_ on queue, it's either been already dealt with (in which case we do nothing), or there's io_poll_complete_work() about to be executed. In that case we either put it on the cancellable list, or, if we know it hadn't been put on all queues ->poll() wanted it on, simulate what cancel would've done. Fixes: 221c5eb23382 ("io_uring: add support for IORING_OP_POLL") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-13 05:48:16 +08:00
if (mask) {
io_cqring_ev_posted(ctx);
io_put_req(req);
}
io_uring: fix poll races This is a straight port of Al's fix for the aio poll implementation, since the io_uring version is heavily based on that. The below description is almost straight from that patch, just modified to fit the io_uring situation. io_poll() has to cope with several unpleasant problems: * requests that might stay around indefinitely need to be made visible for io_cancel(2); that must not be done to a request already completed, though. * in cases when ->poll() has placed us on a waitqueue, wakeup might have happened (and request completed) before ->poll() returns. * worse, in some early wakeup cases request might end up re-added into the queue later - we can't treat "woken up and currently not in the queue" as "it's not going to stick around indefinitely" * ... moreover, ->poll() might have decided not to put it on any queues to start with, and that needs to be distinguished from the previous case * ->poll() might have tried to put us on more than one queue. Only the first will succeed for io poll, so we might end up missing wakeups. OTOH, we might very well notice that only after the wakeup hits and request gets completed (all before ->poll() gets around to the second poll_wait()). In that case it's too late to decide that we have an error. req->woken was an attempt to deal with that. Unfortunately, it was broken. What we need to keep track of is not that wakeup has happened - the thing might come back after that. It's that async reference is already gone and won't come back, so we can't (and needn't) put the request on the list of cancellables. The easiest case is "request hadn't been put on any waitqueues"; we can tell by seeing NULL apt.head, and in that case there won't be anything async. We should either complete the request ourselves (if vfs_poll() reports anything of interest) or return an error. In all other cases we get exclusion with wakeups by grabbing the queue lock. If request is currently on queue and we have something interesting from vfs_poll(), we can steal it and complete the request ourselves. If it's on queue and vfs_poll() has not reported anything interesting, we either put it on the cancellable list, or, if we know that it hadn't been put on all queues ->poll() wanted it on, we steal it and return an error. If it's _not_ on queue, it's either been already dealt with (in which case we do nothing), or there's io_poll_complete_work() about to be executed. In that case we either put it on the cancellable list, or, if we know it hadn't been put on all queues ->poll() wanted it on, simulate what cancel would've done. Fixes: 221c5eb23382 ("io_uring: add support for IORING_OP_POLL") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-13 05:48:16 +08:00
return ipt.error;
}
static enum hrtimer_restart io_timeout_fn(struct hrtimer *timer)
{
struct io_timeout_data *data = container_of(timer,
struct io_timeout_data, timer);
struct io_kiocb *req = data->req;
struct io_ring_ctx *ctx = req->ctx;
unsigned long flags;
spin_lock_irqsave(&ctx->completion_lock, flags);
list_del_init(&req->timeout.list);
atomic_set(&req->ctx->cq_timeouts,
atomic_read(&req->ctx->cq_timeouts) + 1);
io_cqring_fill_event(req, -ETIME);
io_commit_cqring(ctx);
spin_unlock_irqrestore(&ctx->completion_lock, flags);
io_cqring_ev_posted(ctx);
req_set_fail_links(req);
io_put_req(req);
return HRTIMER_NORESTART;
}
static struct io_kiocb *io_timeout_extract(struct io_ring_ctx *ctx,
__u64 user_data)
{
struct io_timeout_data *io;
struct io_kiocb *req;
int ret = -ENOENT;
list_for_each_entry(req, &ctx->timeout_list, timeout.list) {
if (user_data == req->user_data) {
ret = 0;
break;
}
}
if (ret == -ENOENT)
return ERR_PTR(ret);
io = req->async_data;
ret = hrtimer_try_to_cancel(&io->timer);
if (ret == -1)
return ERR_PTR(-EALREADY);
list_del_init(&req->timeout.list);
return req;
}
static int io_timeout_cancel(struct io_ring_ctx *ctx, __u64 user_data)
{
struct io_kiocb *req = io_timeout_extract(ctx, user_data);
if (IS_ERR(req))
return PTR_ERR(req);
req_set_fail_links(req);
io_cqring_fill_event(req, -ECANCELED);
io_put_req_deferred(req, 1);
return 0;
}
static int io_timeout_update(struct io_ring_ctx *ctx, __u64 user_data,
struct timespec64 *ts, enum hrtimer_mode mode)
{
struct io_kiocb *req = io_timeout_extract(ctx, user_data);
struct io_timeout_data *data;
if (IS_ERR(req))
return PTR_ERR(req);
req->timeout.off = 0; /* noseq */
data = req->async_data;
list_add_tail(&req->timeout.list, &ctx->timeout_list);
hrtimer_init(&data->timer, CLOCK_MONOTONIC, mode);
data->timer.function = io_timeout_fn;
hrtimer_start(&data->timer, timespec64_to_ktime(*ts), mode);
return 0;
}
static int io_timeout_remove_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
struct io_timeout_rem *tr = &req->timeout_rem;
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT)))
return -EINVAL;
if (sqe->ioprio || sqe->buf_index || sqe->len)
return -EINVAL;
tr->addr = READ_ONCE(sqe->addr);
tr->flags = READ_ONCE(sqe->timeout_flags);
if (tr->flags & IORING_TIMEOUT_UPDATE) {
if (tr->flags & ~(IORING_TIMEOUT_UPDATE|IORING_TIMEOUT_ABS))
return -EINVAL;
if (get_timespec64(&tr->ts, u64_to_user_ptr(sqe->addr2)))
return -EFAULT;
} else if (tr->flags) {
/* timeout removal doesn't support flags */
return -EINVAL;
}
return 0;
}
/*
* Remove or update an existing timeout command
*/
static int io_timeout_remove(struct io_kiocb *req)
{
struct io_timeout_rem *tr = &req->timeout_rem;
struct io_ring_ctx *ctx = req->ctx;
int ret;
spin_lock_irq(&ctx->completion_lock);
if (req->timeout_rem.flags & IORING_TIMEOUT_UPDATE) {
enum hrtimer_mode mode = (tr->flags & IORING_TIMEOUT_ABS)
? HRTIMER_MODE_ABS : HRTIMER_MODE_REL;
ret = io_timeout_update(ctx, tr->addr, &tr->ts, mode);
} else {
ret = io_timeout_cancel(ctx, tr->addr);
}
io_cqring_fill_event(req, ret);
io_commit_cqring(ctx);
spin_unlock_irq(&ctx->completion_lock);
io_cqring_ev_posted(ctx);
if (ret < 0)
req_set_fail_links(req);
io_put_req(req);
return 0;
}
static int io_timeout_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe,
bool is_timeout_link)
{
struct io_timeout_data *data;
unsigned flags;
u32 off = READ_ONCE(sqe->off);
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
if (sqe->ioprio || sqe->buf_index || sqe->len != 1)
return -EINVAL;
if (off && is_timeout_link)
return -EINVAL;
flags = READ_ONCE(sqe->timeout_flags);
if (flags & ~IORING_TIMEOUT_ABS)
return -EINVAL;
req->timeout.off = off;
if (!req->async_data && io_alloc_async_data(req))
return -ENOMEM;
data = req->async_data;
data->req = req;
if (get_timespec64(&data->ts, u64_to_user_ptr(sqe->addr)))
return -EFAULT;
if (flags & IORING_TIMEOUT_ABS)
data->mode = HRTIMER_MODE_ABS;
else
data->mode = HRTIMER_MODE_REL;
hrtimer_init(&data->timer, CLOCK_MONOTONIC, data->mode);
return 0;
}
static int io_timeout(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
struct io_timeout_data *data = req->async_data;
struct list_head *entry;
u32 tail, off = req->timeout.off;
spin_lock_irq(&ctx->completion_lock);
/*
* sqe->off holds how many events that need to occur for this
* timeout event to be satisfied. If it isn't set, then this is
* a pure timeout request, sequence isn't used.
*/
if (io_is_timeout_noseq(req)) {
entry = ctx->timeout_list.prev;
goto add;
}
tail = ctx->cached_cq_tail - atomic_read(&ctx->cq_timeouts);
req->timeout.target_seq = tail + off;
/*
* Insertion sort, ensuring the first entry in the list is always
* the one we need first.
*/
list_for_each_prev(entry, &ctx->timeout_list) {
struct io_kiocb *nxt = list_entry(entry, struct io_kiocb,
timeout.list);
if (io_is_timeout_noseq(nxt))
continue;
/* nxt.seq is behind @tail, otherwise would've been completed */
if (off >= nxt->timeout.target_seq - tail)
break;
}
add:
list_add(&req->timeout.list, entry);
data->timer.function = io_timeout_fn;
hrtimer_start(&data->timer, timespec64_to_ktime(data->ts), data->mode);
spin_unlock_irq(&ctx->completion_lock);
return 0;
}
static bool io_cancel_cb(struct io_wq_work *work, void *data)
{
struct io_kiocb *req = container_of(work, struct io_kiocb, work);
return req->user_data == (unsigned long) data;
}
static int io_async_cancel_one(struct io_ring_ctx *ctx, void *sqe_addr)
{
enum io_wq_cancel cancel_ret;
int ret = 0;
cancel_ret = io_wq_cancel_cb(ctx->io_wq, io_cancel_cb, sqe_addr, false);
switch (cancel_ret) {
case IO_WQ_CANCEL_OK:
ret = 0;
break;
case IO_WQ_CANCEL_RUNNING:
ret = -EALREADY;
break;
case IO_WQ_CANCEL_NOTFOUND:
ret = -ENOENT;
break;
}
return ret;
}
static void io_async_find_and_cancel(struct io_ring_ctx *ctx,
struct io_kiocb *req, __u64 sqe_addr,
int success_ret)
{
unsigned long flags;
int ret;
ret = io_async_cancel_one(ctx, (void *) (unsigned long) sqe_addr);
if (ret != -ENOENT) {
spin_lock_irqsave(&ctx->completion_lock, flags);
goto done;
}
spin_lock_irqsave(&ctx->completion_lock, flags);
ret = io_timeout_cancel(ctx, sqe_addr);
if (ret != -ENOENT)
goto done;
ret = io_poll_cancel(ctx, sqe_addr);
done:
if (!ret)
ret = success_ret;
io_cqring_fill_event(req, ret);
io_commit_cqring(ctx);
spin_unlock_irqrestore(&ctx->completion_lock, flags);
io_cqring_ev_posted(ctx);
if (ret < 0)
req_set_fail_links(req);
io_put_req(req);
}
static int io_async_cancel_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT)))
return -EINVAL;
if (sqe->ioprio || sqe->off || sqe->len || sqe->cancel_flags)
return -EINVAL;
req->cancel.addr = READ_ONCE(sqe->addr);
return 0;
}
static int io_async_cancel(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
io_async_find_and_cancel(ctx, req, req->cancel.addr, 0);
return 0;
}
static int io_files_update_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
if (unlikely(req->ctx->flags & IORING_SETUP_SQPOLL))
return -EINVAL;
if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT)))
return -EINVAL;
if (sqe->ioprio || sqe->rw_flags)
return -EINVAL;
req->files_update.offset = READ_ONCE(sqe->off);
req->files_update.nr_args = READ_ONCE(sqe->len);
if (!req->files_update.nr_args)
return -EINVAL;
req->files_update.arg = READ_ONCE(sqe->addr);
return 0;
}
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
static int io_files_update(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
{
struct io_ring_ctx *ctx = req->ctx;
struct io_uring_files_update up;
int ret;
if (force_nonblock)
return -EAGAIN;
up.offset = req->files_update.offset;
up.fds = req->files_update.arg;
mutex_lock(&ctx->uring_lock);
ret = __io_sqe_files_update(ctx, &up, req->files_update.nr_args);
mutex_unlock(&ctx->uring_lock);
if (ret < 0)
req_set_fail_links(req);
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
__io_req_complete(req, ret, 0, cs);
return 0;
}
static int io_req_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
switch (req->opcode) {
case IORING_OP_NOP:
return 0;
case IORING_OP_READV:
case IORING_OP_READ_FIXED:
case IORING_OP_READ:
return io_read_prep(req, sqe);
case IORING_OP_WRITEV:
case IORING_OP_WRITE_FIXED:
case IORING_OP_WRITE:
return io_write_prep(req, sqe);
case IORING_OP_POLL_ADD:
return io_poll_add_prep(req, sqe);
case IORING_OP_POLL_REMOVE:
return io_poll_remove_prep(req, sqe);
case IORING_OP_FSYNC:
return io_prep_fsync(req, sqe);
case IORING_OP_SYNC_FILE_RANGE:
return io_prep_sfr(req, sqe);
case IORING_OP_SENDMSG:
case IORING_OP_SEND:
return io_sendmsg_prep(req, sqe);
case IORING_OP_RECVMSG:
case IORING_OP_RECV:
return io_recvmsg_prep(req, sqe);
case IORING_OP_CONNECT:
return io_connect_prep(req, sqe);
case IORING_OP_TIMEOUT:
return io_timeout_prep(req, sqe, false);
case IORING_OP_TIMEOUT_REMOVE:
return io_timeout_remove_prep(req, sqe);
case IORING_OP_ASYNC_CANCEL:
return io_async_cancel_prep(req, sqe);
case IORING_OP_LINK_TIMEOUT:
return io_timeout_prep(req, sqe, true);
case IORING_OP_ACCEPT:
return io_accept_prep(req, sqe);
case IORING_OP_FALLOCATE:
return io_fallocate_prep(req, sqe);
case IORING_OP_OPENAT:
return io_openat_prep(req, sqe);
case IORING_OP_CLOSE:
return io_close_prep(req, sqe);
case IORING_OP_FILES_UPDATE:
return io_files_update_prep(req, sqe);
case IORING_OP_STATX:
return io_statx_prep(req, sqe);
case IORING_OP_FADVISE:
return io_fadvise_prep(req, sqe);
case IORING_OP_MADVISE:
return io_madvise_prep(req, sqe);
case IORING_OP_OPENAT2:
return io_openat2_prep(req, sqe);
case IORING_OP_EPOLL_CTL:
return io_epoll_ctl_prep(req, sqe);
case IORING_OP_SPLICE:
return io_splice_prep(req, sqe);
case IORING_OP_PROVIDE_BUFFERS:
return io_provide_buffers_prep(req, sqe);
case IORING_OP_REMOVE_BUFFERS:
return io_remove_buffers_prep(req, sqe);
case IORING_OP_TEE:
return io_tee_prep(req, sqe);
case IORING_OP_SHUTDOWN:
return io_shutdown_prep(req, sqe);
case IORING_OP_RENAMEAT:
return io_renameat_prep(req, sqe);
case IORING_OP_UNLINKAT:
return io_unlinkat_prep(req, sqe);
}
printk_once(KERN_WARNING "io_uring: unhandled opcode %d\n",
req->opcode);
return-EINVAL;
}
static int io_req_defer_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
if (!sqe)
return 0;
if (io_alloc_async_data(req))
return -EAGAIN;
return io_req_prep(req, sqe);
}
static u32 io_get_sequence(struct io_kiocb *req)
{
struct io_kiocb *pos;
struct io_ring_ctx *ctx = req->ctx;
u32 total_submitted, nr_reqs = 0;
io_for_each_link(pos, req)
nr_reqs++;
total_submitted = ctx->cached_sq_head - ctx->cached_sq_dropped;
return total_submitted - nr_reqs;
}
static int io_req_defer(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_ring_ctx *ctx = req->ctx;
struct io_defer_entry *de;
int ret;
u32 seq;
/* Still need defer if there is pending req in defer list. */
if (likely(list_empty_careful(&ctx->defer_list) &&
!(req->flags & REQ_F_IO_DRAIN)))
return 0;
seq = io_get_sequence(req);
/* Still a chance to pass the sequence check */
if (!req_need_defer(req, seq) && list_empty_careful(&ctx->defer_list))
return 0;
if (!req->async_data) {
ret = io_req_defer_prep(req, sqe);
if (ret)
return ret;
}
io_prep_async_link(req);
de = kmalloc(sizeof(*de), GFP_KERNEL);
if (!de)
return -ENOMEM;
spin_lock_irq(&ctx->completion_lock);
if (!req_need_defer(req, seq) && list_empty(&ctx->defer_list)) {
spin_unlock_irq(&ctx->completion_lock);
kfree(de);
io_queue_async_work(req);
return -EIOCBQUEUED;
}
trace_io_uring_defer(ctx, req, req->user_data);
de->req = req;
de->seq = seq;
list_add_tail(&de->list, &ctx->defer_list);
spin_unlock_irq(&ctx->completion_lock);
return -EIOCBQUEUED;
}
static void io_req_drop_files(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
struct io_uring_task *tctx = req->task->io_uring;
unsigned long flags;
spin_lock_irqsave(&ctx->inflight_lock, flags);
list_del(&req->inflight_entry);
if (atomic_read(&tctx->in_idle))
wake_up(&tctx->wait);
spin_unlock_irqrestore(&ctx->inflight_lock, flags);
req->flags &= ~REQ_F_INFLIGHT;
put_files_struct(req->work.identity->files);
put_nsproxy(req->work.identity->nsproxy);
req->work.flags &= ~IO_WQ_WORK_FILES;
}
static void __io_clean_op(struct io_kiocb *req)
{
if (req->flags & REQ_F_BUFFER_SELECTED) {
switch (req->opcode) {
case IORING_OP_READV:
case IORING_OP_READ_FIXED:
case IORING_OP_READ:
kfree((void *)(unsigned long)req->rw.addr);
break;
case IORING_OP_RECVMSG:
case IORING_OP_RECV:
kfree(req->sr_msg.kbuf);
break;
}
req->flags &= ~REQ_F_BUFFER_SELECTED;
}
if (req->flags & REQ_F_NEED_CLEANUP) {
switch (req->opcode) {
case IORING_OP_READV:
case IORING_OP_READ_FIXED:
case IORING_OP_READ:
case IORING_OP_WRITEV:
case IORING_OP_WRITE_FIXED:
case IORING_OP_WRITE: {
struct io_async_rw *io = req->async_data;
if (io->free_iovec)
kfree(io->free_iovec);
break;
}
case IORING_OP_RECVMSG:
case IORING_OP_SENDMSG: {
struct io_async_msghdr *io = req->async_data;
if (io->iov != io->fast_iov)
kfree(io->iov);
break;
}
case IORING_OP_SPLICE:
case IORING_OP_TEE:
io_put_file(req, req->splice.file_in,
(req->splice.flags & SPLICE_F_FD_IN_FIXED));
break;
case IORING_OP_OPENAT:
case IORING_OP_OPENAT2:
if (req->open.filename)
putname(req->open.filename);
break;
case IORING_OP_RENAMEAT:
putname(req->rename.oldpath);
putname(req->rename.newpath);
break;
case IORING_OP_UNLINKAT:
putname(req->unlink.filename);
break;
}
req->flags &= ~REQ_F_NEED_CLEANUP;
}
if (req->flags & REQ_F_INFLIGHT)
io_req_drop_files(req);
}
static int io_issue_sqe(struct io_kiocb *req, bool force_nonblock,
struct io_comp_state *cs)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_ring_ctx *ctx = req->ctx;
int ret;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
switch (req->opcode) {
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
case IORING_OP_NOP:
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
ret = io_nop(req, cs);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
break;
case IORING_OP_READV:
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
case IORING_OP_READ_FIXED:
case IORING_OP_READ:
ret = io_read(req, force_nonblock, cs);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
break;
case IORING_OP_WRITEV:
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
case IORING_OP_WRITE_FIXED:
case IORING_OP_WRITE:
ret = io_write(req, force_nonblock, cs);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
break;
case IORING_OP_FSYNC:
ret = io_fsync(req, force_nonblock);
break;
case IORING_OP_POLL_ADD:
ret = io_poll_add(req);
break;
case IORING_OP_POLL_REMOVE:
ret = io_poll_remove(req);
break;
case IORING_OP_SYNC_FILE_RANGE:
ret = io_sync_file_range(req, force_nonblock);
break;
case IORING_OP_SENDMSG:
ret = io_sendmsg(req, force_nonblock, cs);
break;
case IORING_OP_SEND:
ret = io_send(req, force_nonblock, cs);
break;
case IORING_OP_RECVMSG:
ret = io_recvmsg(req, force_nonblock, cs);
break;
case IORING_OP_RECV:
ret = io_recv(req, force_nonblock, cs);
break;
case IORING_OP_TIMEOUT:
ret = io_timeout(req);
break;
case IORING_OP_TIMEOUT_REMOVE:
ret = io_timeout_remove(req);
break;
case IORING_OP_ACCEPT:
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
ret = io_accept(req, force_nonblock, cs);
break;
case IORING_OP_CONNECT:
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
ret = io_connect(req, force_nonblock, cs);
break;
case IORING_OP_ASYNC_CANCEL:
ret = io_async_cancel(req);
break;
case IORING_OP_FALLOCATE:
ret = io_fallocate(req, force_nonblock);
break;
case IORING_OP_OPENAT:
ret = io_openat(req, force_nonblock);
break;
case IORING_OP_CLOSE:
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
ret = io_close(req, force_nonblock, cs);
break;
case IORING_OP_FILES_UPDATE:
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
ret = io_files_update(req, force_nonblock, cs);
break;
case IORING_OP_STATX:
ret = io_statx(req, force_nonblock);
break;
case IORING_OP_FADVISE:
ret = io_fadvise(req, force_nonblock);
break;
case IORING_OP_MADVISE:
ret = io_madvise(req, force_nonblock);
break;
case IORING_OP_OPENAT2:
ret = io_openat2(req, force_nonblock);
break;
case IORING_OP_EPOLL_CTL:
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
ret = io_epoll_ctl(req, force_nonblock, cs);
break;
case IORING_OP_SPLICE:
ret = io_splice(req, force_nonblock);
break;
case IORING_OP_PROVIDE_BUFFERS:
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
ret = io_provide_buffers(req, force_nonblock, cs);
break;
case IORING_OP_REMOVE_BUFFERS:
io_uring: pass in completion state to appropriate issue side handlers Provide the completion state to the handlers that we know can complete inline, so they can utilize this for batching completions. Cap the max batch count at 32. This should be enough to provide a good amortization of the cost of the lock+commit dance for completions, while still being low enough not to cause any real latency issues for SQPOLL applications. Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his profile from: 17.97% [kernel] [k] copy_user_generic_unrolled 13.92% [kernel] [k] io_commit_cqring 11.04% [kernel] [k] __io_cqring_fill_event 10.33% [kernel] [k] udp_recvmsg 5.94% [kernel] [k] skb_release_data 4.31% [kernel] [k] udp_rmem_release 2.68% [kernel] [k] __check_object_size 2.24% [kernel] [k] __slab_free 2.22% [kernel] [k] _raw_spin_lock_bh 2.21% [kernel] [k] kmem_cache_free 2.13% [kernel] [k] free_pcppages_bulk 1.83% [kernel] [k] io_submit_sqes 1.38% [kernel] [k] page_frag_free 1.31% [kernel] [k] inet_recvmsg to 19.99% [kernel] [k] copy_user_generic_unrolled 11.63% [kernel] [k] skb_release_data 9.36% [kernel] [k] udp_rmem_release 8.64% [kernel] [k] udp_recvmsg 6.21% [kernel] [k] __slab_free 4.39% [kernel] [k] __check_object_size 3.64% [kernel] [k] free_pcppages_bulk 2.41% [kernel] [k] kmem_cache_free 2.00% [kernel] [k] io_submit_sqes 1.95% [kernel] [k] page_frag_free 1.54% [kernel] [k] io_put_req [...] 0.07% [kernel] [k] io_commit_cqring 0.44% [kernel] [k] __io_cqring_fill_event Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-23 00:13:11 +08:00
ret = io_remove_buffers(req, force_nonblock, cs);
break;
case IORING_OP_TEE:
ret = io_tee(req, force_nonblock);
break;
case IORING_OP_SHUTDOWN:
ret = io_shutdown(req, force_nonblock);
break;
case IORING_OP_RENAMEAT:
ret = io_renameat(req, force_nonblock);
break;
case IORING_OP_UNLINKAT:
ret = io_unlinkat(req, force_nonblock);
break;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
default:
ret = -EINVAL;
break;
}
if (ret)
return ret;
/* If the op doesn't have a file, we're not polling for it */
if ((ctx->flags & IORING_SETUP_IOPOLL) && req->file) {
const bool in_async = io_wq_current_is_worker();
/* workqueue context doesn't hold uring_lock, grab it now */
if (in_async)
mutex_lock(&ctx->uring_lock);
io_iopoll_req_issued(req, in_async);
if (in_async)
mutex_unlock(&ctx->uring_lock);
}
return 0;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static struct io_wq_work *io_wq_submit_work(struct io_wq_work *work)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_kiocb *req = container_of(work, struct io_kiocb, work);
struct io_kiocb *timeout;
int ret = 0;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
timeout = io_prep_linked_timeout(req);
if (timeout)
io_queue_linked_timeout(timeout);
/* if NO_CANCEL is set, we must still run the work */
if ((work->flags & (IO_WQ_WORK_CANCEL|IO_WQ_WORK_NO_CANCEL)) ==
IO_WQ_WORK_CANCEL) {
ret = -ECANCELED;
}
if (!ret) {
do {
ret = io_issue_sqe(req, false, NULL);
/*
* We can get EAGAIN for polled IO even though we're
* forcing a sync submission from here, since we can't
* wait for request slots on the block side.
*/
if (ret != -EAGAIN)
break;
cond_resched();
} while (1);
}
if (ret) {
io_uring: always let io_iopoll_complete() complete polled io Abaci Fuzz reported a double-free or invalid-free BUG in io_commit_cqring(): [ 95.504842] BUG: KASAN: double-free or invalid-free in io_commit_cqring+0x3ec/0x8e0 [ 95.505921] [ 95.506225] CPU: 0 PID: 4037 Comm: io_wqe_worker-0 Tainted: G B W 5.10.0-rc5+ #1 [ 95.507434] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 95.508248] Call Trace: [ 95.508683] dump_stack+0x107/0x163 [ 95.509323] ? io_commit_cqring+0x3ec/0x8e0 [ 95.509982] print_address_description.constprop.0+0x3e/0x60 [ 95.510814] ? vprintk_func+0x98/0x140 [ 95.511399] ? io_commit_cqring+0x3ec/0x8e0 [ 95.512036] ? io_commit_cqring+0x3ec/0x8e0 [ 95.512733] kasan_report_invalid_free+0x51/0x80 [ 95.513431] ? io_commit_cqring+0x3ec/0x8e0 [ 95.514047] __kasan_slab_free+0x141/0x160 [ 95.514699] kfree+0xd1/0x390 [ 95.515182] io_commit_cqring+0x3ec/0x8e0 [ 95.515799] __io_req_complete.part.0+0x64/0x90 [ 95.516483] io_wq_submit_work+0x1fa/0x260 [ 95.517117] io_worker_handle_work+0xeac/0x1c00 [ 95.517828] io_wqe_worker+0xc94/0x11a0 [ 95.518438] ? io_worker_handle_work+0x1c00/0x1c00 [ 95.519151] ? __kthread_parkme+0x11d/0x1d0 [ 95.519806] ? io_worker_handle_work+0x1c00/0x1c00 [ 95.520512] ? io_worker_handle_work+0x1c00/0x1c00 [ 95.521211] kthread+0x396/0x470 [ 95.521727] ? _raw_spin_unlock_irq+0x24/0x30 [ 95.522380] ? kthread_mod_delayed_work+0x180/0x180 [ 95.523108] ret_from_fork+0x22/0x30 [ 95.523684] [ 95.523985] Allocated by task 4035: [ 95.524543] kasan_save_stack+0x1b/0x40 [ 95.525136] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 95.525882] kmem_cache_alloc_trace+0x17b/0x310 [ 95.533930] io_queue_sqe+0x225/0xcb0 [ 95.534505] io_submit_sqes+0x1768/0x25f0 [ 95.535164] __x64_sys_io_uring_enter+0x89e/0xd10 [ 95.535900] do_syscall_64+0x33/0x40 [ 95.536465] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 95.537199] [ 95.537505] Freed by task 4035: [ 95.538003] kasan_save_stack+0x1b/0x40 [ 95.538599] kasan_set_track+0x1c/0x30 [ 95.539177] kasan_set_free_info+0x1b/0x30 [ 95.539798] __kasan_slab_free+0x112/0x160 [ 95.540427] kfree+0xd1/0x390 [ 95.540910] io_commit_cqring+0x3ec/0x8e0 [ 95.541516] io_iopoll_complete+0x914/0x1390 [ 95.542150] io_do_iopoll+0x580/0x700 [ 95.542724] io_iopoll_try_reap_events.part.0+0x108/0x200 [ 95.543512] io_ring_ctx_wait_and_kill+0x118/0x340 [ 95.544206] io_uring_release+0x43/0x50 [ 95.544791] __fput+0x28d/0x940 [ 95.545291] task_work_run+0xea/0x1b0 [ 95.545873] do_exit+0xb6a/0x2c60 [ 95.546400] do_group_exit+0x12a/0x320 [ 95.546967] __x64_sys_exit_group+0x3f/0x50 [ 95.547605] do_syscall_64+0x33/0x40 [ 95.548155] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The reason is that once we got a non EAGAIN error in io_wq_submit_work(), we'll complete req by calling io_req_complete(), which will hold completion_lock to call io_commit_cqring(), but for polled io, io_iopoll_complete() won't hold completion_lock to call io_commit_cqring(), then there maybe concurrent access to ctx->defer_list, double free may happen. To fix this bug, we always let io_iopoll_complete() complete polled io. Cc: <stable@vger.kernel.org> # 5.5+ Reported-by: Abaci Fuzz <abaci@linux.alibaba.com> Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07 06:22:42 +08:00
/*
* io_iopoll_complete() does not hold completion_lock to complete
* polled io, so here for polled io, just mark it done and still let
* io_iopoll_complete() complete it.
*/
if (req->ctx->flags & IORING_SETUP_IOPOLL) {
struct kiocb *kiocb = &req->rw.kiocb;
kiocb_done(kiocb, ret, NULL);
} else {
req_set_fail_links(req);
io_req_complete(req, ret);
}
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return io_steal_work(req);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static inline struct file *io_file_from_index(struct io_ring_ctx *ctx,
int index)
{
struct fixed_file_table *table;
table = &ctx->file_data->table[index >> IORING_FILE_TABLE_SHIFT];
return table->files[index & IORING_FILE_TABLE_MASK];
}
static struct file *io_file_get(struct io_submit_state *state,
struct io_kiocb *req, int fd, bool fixed)
{
struct io_ring_ctx *ctx = req->ctx;
struct file *file;
if (fixed) {
if (unlikely((unsigned int)fd >= ctx->nr_user_files))
return NULL;
fd = array_index_nospec(fd, ctx->nr_user_files);
file = io_file_from_index(ctx, fd);
io_set_resource_node(req);
} else {
trace_io_uring_file_get(ctx, fd);
file = __io_file_get(state, fd);
}
return file;
}
static enum hrtimer_restart io_link_timeout_fn(struct hrtimer *timer)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_timeout_data *data = container_of(timer,
struct io_timeout_data, timer);
struct io_kiocb *prev, *req = data->req;
struct io_ring_ctx *ctx = req->ctx;
unsigned long flags;
spin_lock_irqsave(&ctx->completion_lock, flags);
prev = req->timeout.head;
req->timeout.head = NULL;
/*
* We don't expect the list to be empty, that will only happen if we
* race with the completion of the linked work.
*/
if (prev && refcount_inc_not_zero(&prev->refs))
io_remove_next_linked(prev);
else
prev = NULL;
spin_unlock_irqrestore(&ctx->completion_lock, flags);
if (prev) {
req_set_fail_links(prev);
io_async_find_and_cancel(ctx, req, prev->user_data, -ETIME);
io_put_req(prev);
} else {
io_req_complete(req, -ETIME);
}
return HRTIMER_NORESTART;
}
io_uring: fix recursive completion locking on oveflow flush syszbot reports a scenario where we recurse on the completion lock when flushing an overflow: 1 lock held by syz-executor287/6816: #0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333 stack backtrace: CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2391 [inline] check_deadlock kernel/locking/lockdep.c:2432 [inline] validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202 __lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426 lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167 spin_lock_irq include/linux/spinlock.h:379 [inline] io_queue_linked_timeout fs/io_uring.c:5928 [inline] __io_queue_async_work fs/io_uring.c:1192 [inline] __io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237 io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359 io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808 io_uring_release+0x59/0x70 fs/io_uring.c:7829 __fput+0x34f/0x7b0 fs/file_table.c:281 task_work_run+0x137/0x1c0 kernel/task_work.c:135 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0x5f3/0x1f20 kernel/exit.c:806 do_group_exit+0x161/0x2d0 kernel/exit.c:903 __do_sys_exit_group+0x13/0x20 kernel/exit.c:914 __se_sys_exit_group+0x10/0x10 kernel/exit.c:912 __x64_sys_exit_group+0x37/0x40 kernel/exit.c:912 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by passing back the link from __io_queue_async_work(), and then let the caller handle the queueing of the link. Take care to also punt the submission reference put to the caller, as we're holding the completion lock for the __io_queue_defer() case. Hence we need to mark the io_kiocb appropriately for that case. Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-10 23:55:22 +08:00
static void __io_queue_linked_timeout(struct io_kiocb *req)
{
/*
* If the back reference is NULL, then our linked request finished
* before we got a chance to setup the timer
*/
if (req->timeout.head) {
struct io_timeout_data *data = req->async_data;
data->timer.function = io_link_timeout_fn;
hrtimer_start(&data->timer, timespec64_to_ktime(data->ts),
data->mode);
}
io_uring: fix recursive completion locking on oveflow flush syszbot reports a scenario where we recurse on the completion lock when flushing an overflow: 1 lock held by syz-executor287/6816: #0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333 stack backtrace: CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2391 [inline] check_deadlock kernel/locking/lockdep.c:2432 [inline] validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202 __lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426 lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167 spin_lock_irq include/linux/spinlock.h:379 [inline] io_queue_linked_timeout fs/io_uring.c:5928 [inline] __io_queue_async_work fs/io_uring.c:1192 [inline] __io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237 io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359 io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808 io_uring_release+0x59/0x70 fs/io_uring.c:7829 __fput+0x34f/0x7b0 fs/file_table.c:281 task_work_run+0x137/0x1c0 kernel/task_work.c:135 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0x5f3/0x1f20 kernel/exit.c:806 do_group_exit+0x161/0x2d0 kernel/exit.c:903 __do_sys_exit_group+0x13/0x20 kernel/exit.c:914 __se_sys_exit_group+0x10/0x10 kernel/exit.c:912 __x64_sys_exit_group+0x37/0x40 kernel/exit.c:912 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by passing back the link from __io_queue_async_work(), and then let the caller handle the queueing of the link. Take care to also punt the submission reference put to the caller, as we're holding the completion lock for the __io_queue_defer() case. Hence we need to mark the io_kiocb appropriately for that case. Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-10 23:55:22 +08:00
}
static void io_queue_linked_timeout(struct io_kiocb *req)
{
struct io_ring_ctx *ctx = req->ctx;
spin_lock_irq(&ctx->completion_lock);
__io_queue_linked_timeout(req);
spin_unlock_irq(&ctx->completion_lock);
/* drop submission reference */
io_put_req(req);
}
static struct io_kiocb *io_prep_linked_timeout(struct io_kiocb *req)
{
struct io_kiocb *nxt = req->link;
if (!nxt || (req->flags & REQ_F_LINK_TIMEOUT) ||
nxt->opcode != IORING_OP_LINK_TIMEOUT)
return NULL;
nxt->timeout.head = req;
nxt->flags |= REQ_F_LTIMEOUT_ACTIVE;
req->flags |= REQ_F_LINK_TIMEOUT;
return nxt;
}
static void __io_queue_sqe(struct io_kiocb *req, struct io_comp_state *cs)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_kiocb *linked_timeout;
const struct cred *old_creds = NULL;
int ret;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
again:
linked_timeout = io_prep_linked_timeout(req);
if ((req->flags & REQ_F_WORK_INITIALIZED) &&
(req->work.flags & IO_WQ_WORK_CREDS) &&
req->work.identity->creds != current_cred()) {
if (old_creds)
revert_creds(old_creds);
if (old_creds == req->work.identity->creds)
old_creds = NULL; /* restored original creds */
else
old_creds = override_creds(req->work.identity->creds);
}
ret = io_issue_sqe(req, true, cs);
/*
* We async punt it if the file wasn't marked NOWAIT, or if the file
* doesn't support non-blocking read/write attempts
*/
if (ret == -EAGAIN && !(req->flags & REQ_F_NOWAIT)) {
if (!io_arm_poll_handler(req)) {
/*
* Queued up for async execution, worker will release
* submit reference when the iocb is actually submitted.
*/
io_queue_async_work(req);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
if (linked_timeout)
io_queue_linked_timeout(linked_timeout);
} else if (likely(!ret)) {
/* drop submission reference */
req = io_put_req_find_next(req);
if (linked_timeout)
io_queue_linked_timeout(linked_timeout);
if (req) {
if (!(req->flags & REQ_F_FORCE_ASYNC))
goto again;
io_queue_async_work(req);
}
} else {
/* un-prep timeout, so it'll be killed as any other linked */
req->flags &= ~REQ_F_LINK_TIMEOUT;
req_set_fail_links(req);
io_put_req(req);
io_req_complete(req, ret);
}
if (old_creds)
revert_creds(old_creds);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static void io_queue_sqe(struct io_kiocb *req, const struct io_uring_sqe *sqe,
struct io_comp_state *cs)
{
int ret;
ret = io_req_defer(req, sqe);
if (ret) {
if (ret != -EIOCBQUEUED) {
fail_req:
req_set_fail_links(req);
io_put_req(req);
io_req_complete(req, ret);
}
} else if (req->flags & REQ_F_FORCE_ASYNC) {
if (!req->async_data) {
ret = io_req_defer_prep(req, sqe);
if (unlikely(ret))
goto fail_req;
}
io_queue_async_work(req);
} else {
if (sqe) {
ret = io_req_prep(req, sqe);
if (unlikely(ret))
goto fail_req;
}
__io_queue_sqe(req, cs);
}
}
static inline void io_queue_link_head(struct io_kiocb *req,
struct io_comp_state *cs)
{
if (unlikely(req->flags & REQ_F_FAIL_LINK)) {
io_put_req(req);
io_req_complete(req, -ECANCELED);
} else
io_queue_sqe(req, NULL, cs);
}
struct io_submit_link {
struct io_kiocb *head;
struct io_kiocb *last;
};
static int io_submit_sqe(struct io_kiocb *req, const struct io_uring_sqe *sqe,
struct io_submit_link *link, struct io_comp_state *cs)
{
struct io_ring_ctx *ctx = req->ctx;
int ret;
/*
* If we already have a head request, queue this one for async
* submittal once the head completes. If we don't have a head but
* IOSQE_IO_LINK is set in the sqe, start a new head. This one will be
* submitted sync once the chain is complete. If none of those
* conditions are true (normal request), then just queue it.
*/
if (link->head) {
struct io_kiocb *head = link->head;
/*
* Taking sequential execution of a link, draining both sides
* of the link also fullfils IOSQE_IO_DRAIN semantics for all
* requests in the link. So, it drains the head and the
* next after the link request. The last one is done via
* drain_next flag to persist the effect across calls.
*/
if (req->flags & REQ_F_IO_DRAIN) {
head->flags |= REQ_F_IO_DRAIN;
ctx->drain_next = 1;
}
ret = io_req_defer_prep(req, sqe);
if (unlikely(ret)) {
/* fail even hard links since we don't submit */
head->flags |= REQ_F_FAIL_LINK;
return ret;
}
trace_io_uring_link(ctx, req, head);
link->last->link = req;
link->last = req;
/* last request of a link, enqueue the link */
if (!(req->flags & (REQ_F_LINK | REQ_F_HARDLINK))) {
io_queue_link_head(head, cs);
link->head = NULL;
}
} else {
if (unlikely(ctx->drain_next)) {
req->flags |= REQ_F_IO_DRAIN;
ctx->drain_next = 0;
}
if (req->flags & (REQ_F_LINK | REQ_F_HARDLINK)) {
ret = io_req_defer_prep(req, sqe);
if (unlikely(ret))
req->flags |= REQ_F_FAIL_LINK;
link->head = req;
link->last = req;
} else {
io_queue_sqe(req, sqe, cs);
}
}
return 0;
}
/*
* Batched submission is done, ensure local IO is flushed out.
*/
static void io_submit_state_end(struct io_submit_state *state)
{
if (!list_empty(&state->comp.list))
io_submit_flush_completions(&state->comp);
if (state->plug_started)
blk_finish_plug(&state->plug);
io_state_file_put(state);
if (state->free_reqs)
kmem_cache_free_bulk(req_cachep, state->free_reqs, state->reqs);
}
/*
* Start submission side cache.
*/
static void io_submit_state_start(struct io_submit_state *state,
struct io_ring_ctx *ctx, unsigned int max_ios)
{
state->plug_started = false;
state->comp.nr = 0;
INIT_LIST_HEAD(&state->comp.list);
state->comp.ctx = ctx;
state->free_reqs = 0;
state->file_refs = 0;
state->ios_left = max_ios;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static void io_commit_sqring(struct io_ring_ctx *ctx)
{
struct io_rings *rings = ctx->rings;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/*
* Ensure any loads from the SQEs are done at this point,
* since once we write the new head, the application could
* write new data to them.
*/
smp_store_release(&rings->sq.head, ctx->cached_sq_head);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
/*
* Fetch an sqe, if one is available. Note that sqe_ptr will point to memory
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
* that is mapped by userspace. This means that care needs to be taken to
* ensure that reads are stable, as we cannot rely on userspace always
* being a good citizen. If members of the sqe are validated and then later
* used, it's important that those reads are done through READ_ONCE() to
* prevent a re-load down the line.
*/
static const struct io_uring_sqe *io_get_sqe(struct io_ring_ctx *ctx)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
u32 *sq_array = ctx->sq_array;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
unsigned head;
/*
* The cached sq head (or cq tail) serves two purposes:
*
* 1) allows us to batch the cost of updating the user visible
* head updates.
* 2) allows the kernel side to track the head on its own, even
* though the application is the one updating it.
*/
head = READ_ONCE(sq_array[ctx->cached_sq_head & ctx->sq_mask]);
if (likely(head < ctx->sq_entries))
return &ctx->sq_sqes[head];
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/* drop invalid entries */
ctx->cached_sq_dropped++;
WRITE_ONCE(ctx->rings->sq_dropped, ctx->cached_sq_dropped);
return NULL;
}
static inline void io_consume_sqe(struct io_ring_ctx *ctx)
{
ctx->cached_sq_head++;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
/*
* Check SQE restrictions (opcode and flags).
*
* Returns 'true' if SQE is allowed, 'false' otherwise.
*/
static inline bool io_check_restriction(struct io_ring_ctx *ctx,
struct io_kiocb *req,
unsigned int sqe_flags)
{
if (!ctx->restricted)
return true;
if (!test_bit(req->opcode, ctx->restrictions.sqe_op))
return false;
if ((sqe_flags & ctx->restrictions.sqe_flags_required) !=
ctx->restrictions.sqe_flags_required)
return false;
if (sqe_flags & ~(ctx->restrictions.sqe_flags_allowed |
ctx->restrictions.sqe_flags_required))
return false;
return true;
}
#define SQE_VALID_FLAGS (IOSQE_FIXED_FILE|IOSQE_IO_DRAIN|IOSQE_IO_LINK| \
IOSQE_IO_HARDLINK | IOSQE_ASYNC | \
IOSQE_BUFFER_SELECT)
static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
const struct io_uring_sqe *sqe,
struct io_submit_state *state)
{
unsigned int sqe_flags;
int id, ret;
req->opcode = READ_ONCE(sqe->opcode);
req->user_data = READ_ONCE(sqe->user_data);
req->async_data = NULL;
req->file = NULL;
req->ctx = ctx;
req->flags = 0;
req->link = NULL;
req->fixed_file_refs = NULL;
/* one is dropped after submission, the other at completion */
refcount_set(&req->refs, 2);
req->task = current;
req->result = 0;
if (unlikely(req->opcode >= IORING_OP_LAST))
return -EINVAL;
if (unlikely(io_sq_thread_acquire_mm_files(ctx, req)))
return -EFAULT;
sqe_flags = READ_ONCE(sqe->flags);
/* enforce forwards compatibility on users */
if (unlikely(sqe_flags & ~SQE_VALID_FLAGS))
return -EINVAL;
if (unlikely(!io_check_restriction(ctx, req, sqe_flags)))
return -EACCES;
if ((sqe_flags & IOSQE_BUFFER_SELECT) &&
!io_op_defs[req->opcode].buffer_select)
return -EOPNOTSUPP;
id = READ_ONCE(sqe->personality);
if (id) {
struct io_identity *iod;
iod = idr_find(&ctx->personality_idr, id);
if (unlikely(!iod))
return -EINVAL;
refcount_inc(&iod->count);
__io_req_init_async(req);
get_cred(iod->creds);
req->work.identity = iod;
req->work.flags |= IO_WQ_WORK_CREDS;
}
/* same numerical values with corresponding REQ_F_*, safe to copy */
req->flags |= sqe_flags;
/*
* Plug now if we have more than 1 IO left after this, and the target
* is potentially a read/write to block based storage.
*/
if (!state->plug_started && state->ios_left > 1 &&
io_op_defs[req->opcode].plug) {
blk_start_plug(&state->plug);
state->plug_started = true;
}
ret = 0;
if (io_op_defs[req->opcode].needs_file) {
bool fixed = req->flags & REQ_F_FIXED_FILE;
req->file = io_file_get(state, req, READ_ONCE(sqe->fd), fixed);
if (unlikely(!req->file &&
!io_op_defs[req->opcode].needs_file_no_error))
ret = -EBADF;
}
state->ios_left--;
return ret;
}
static int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr)
{
struct io_submit_state state;
struct io_submit_link link;
int i, submitted = 0;
/* if we have a backlog and couldn't flush it all, return BUSY */
if (test_bit(0, &ctx->sq_check_overflow)) {
if (!io_cqring_overflow_flush(ctx, false, NULL, NULL))
return -EBUSY;
}
/* make sure SQ entry isn't read before tail */
nr = min3(nr, ctx->sq_entries, io_sqring_entries(ctx));
if (!percpu_ref_tryget_many(&ctx->refs, nr))
return -EAGAIN;
percpu_counter_add(&current->io_uring->inflight, nr);
refcount_add(nr, &current->usage);
io_submit_state_start(&state, ctx, nr);
link.head = NULL;
for (i = 0; i < nr; i++) {
const struct io_uring_sqe *sqe;
struct io_kiocb *req;
int err;
sqe = io_get_sqe(ctx);
if (unlikely(!sqe)) {
io_consume_sqe(ctx);
break;
}
req = io_alloc_req(ctx, &state);
if (unlikely(!req)) {
if (!submitted)
submitted = -EAGAIN;
break;
}
io_consume_sqe(ctx);
/* will complete beyond this point, count as submitted */
submitted++;
err = io_init_req(ctx, req, sqe, &state);
if (unlikely(err)) {
fail_req:
io_put_req(req);
io_req_complete(req, err);
break;
}
trace_io_uring_submit_sqe(ctx, req->opcode, req->user_data,
true, io_async_submit(ctx));
err = io_submit_sqe(req, sqe, &link, &state.comp);
if (err)
goto fail_req;
}
if (unlikely(submitted != nr)) {
int ref_used = (submitted == -EAGAIN) ? 0 : submitted;
struct io_uring_task *tctx = current->io_uring;
int unused = nr - ref_used;
percpu_ref_put_many(&ctx->refs, unused);
percpu_counter_sub(&tctx->inflight, unused);
put_task_struct_many(current, unused);
}
if (link.head)
io_queue_link_head(link.head, &state.comp);
io_submit_state_end(&state);
/* Commit SQ ring head once we've consumed and submitted all SQEs */
io_commit_sqring(ctx);
return submitted;
}
static inline void io_ring_set_wakeup_flag(struct io_ring_ctx *ctx)
{
/* Tell userspace we may need a wakeup call */
spin_lock_irq(&ctx->completion_lock);
ctx->rings->sq_flags |= IORING_SQ_NEED_WAKEUP;
spin_unlock_irq(&ctx->completion_lock);
}
static inline void io_ring_clear_wakeup_flag(struct io_ring_ctx *ctx)
{
spin_lock_irq(&ctx->completion_lock);
ctx->rings->sq_flags &= ~IORING_SQ_NEED_WAKEUP;
spin_unlock_irq(&ctx->completion_lock);
}
static int __io_sq_thread(struct io_ring_ctx *ctx, bool cap_entries)
{
unsigned int to_submit;
io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL After making ext4 support iopoll method: let ext4_file_operations's iopoll method be iomap_dio_iopoll(), we found fio can easily hang in fio_ioring_getevents() with below fio job: rm -f testfile; sync; sudo fio -name=fiotest -filename=testfile -iodepth=128 -thread -rw=write -ioengine=io_uring -hipri=1 -sqthread_poll=1 -direct=1 -bs=4k -size=10G -numjobs=8 -runtime=2000 -group_reporting with IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL enabled. There are two issues that results in this hang, one reason is that when IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL are enabled, fio does not use io_uring_enter to get completed events, it relies on kernel io_sq_thread to poll for completed events. Another reason is that there is a race: when io_submit_sqes() in io_sq_thread() submits a batch of sqes, variable 'inflight' will record the number of submitted reqs, then io_sq_thread will poll for reqs which have been added to poll_list. But note, if some previous reqs have been punted to io worker, these reqs will won't be in poll_list timely. io_sq_thread() will only poll for a part of previous submitted reqs, and then find poll_list is empty, reset variable 'inflight' to be zero. If app just waits these deferred reqs and does not wake up io_sq_thread again, then hang happens. For app that entirely relies on io_sq_thread to poll completed requests, let io_iopoll_req_issued() wake up io_sq_thread properly when adding new element to poll_list, and when io_sq_thread prepares to sleep, check whether poll_list is empty again, if not empty, continue to poll. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25 22:12:08 +08:00
int ret = 0;
to_submit = io_sqring_entries(ctx);
/* if we're handling multiple rings, cap submit size for fairness */
if (cap_entries && to_submit > 8)
to_submit = 8;
if (!list_empty(&ctx->iopoll_list) || to_submit) {
unsigned nr_events = 0;
io_uring: fix io_sq_thread_stop running in front of io_sq_thread INFO: task syz-executor.5:8634 blocked for more than 143 seconds. Not tainted 5.2.0-rc5+ #3 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor.5 D25632 8634 8224 0x00004004 Call Trace: context_switch kernel/sched/core.c:2818 [inline] __schedule+0x658/0x9e0 kernel/sched/core.c:3445 schedule+0x131/0x1d0 kernel/sched/core.c:3509 schedule_timeout+0x9a/0x2b0 kernel/time/timer.c:1783 do_wait_for_common+0x35e/0x5a0 kernel/sched/completion.c:83 __wait_for_common kernel/sched/completion.c:104 [inline] wait_for_common kernel/sched/completion.c:115 [inline] wait_for_completion+0x47/0x60 kernel/sched/completion.c:136 kthread_stop+0xb4/0x150 kernel/kthread.c:559 io_sq_thread_stop fs/io_uring.c:2252 [inline] io_finish_async fs/io_uring.c:2259 [inline] io_ring_ctx_free fs/io_uring.c:2770 [inline] io_ring_ctx_wait_and_kill+0x268/0x880 fs/io_uring.c:2834 io_uring_release+0x5d/0x70 fs/io_uring.c:2842 __fput+0x2e4/0x740 fs/file_table.c:280 ____fput+0x15/0x20 fs/file_table.c:313 task_work_run+0x17e/0x1b0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:185 [inline] exit_to_usermode_loop arch/x86/entry/common.c:168 [inline] prepare_exit_to_usermode+0x402/0x4f0 arch/x86/entry/common.c:199 syscall_return_slowpath+0x110/0x440 arch/x86/entry/common.c:279 do_syscall_64+0x126/0x140 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x412fb1 Code: 80 3b 7c 0f 84 c7 02 00 00 c7 85 d0 00 00 00 00 00 00 00 48 8b 05 cf a6 24 00 49 8b 14 24 41 b9 cb 2a 44 00 48 89 ee 48 89 df <48> 85 c0 4c 0f 45 c8 45 31 c0 31 c9 e8 0e 5b 00 00 85 c0 41 89 c7 RSP: 002b:00007ffe7ee6a180 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000412fb1 RDX: 0000001b2d920000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000001 R08: 00000000f3a3e1f8 R09: 00000000f3a3e1fc R10: 00007ffe7ee6a260 R11: 0000000000000293 R12: 000000000075c9a0 R13: 000000000075c9a0 R14: 0000000000024c00 R15: 000000000075bf2c ============================================= There is an wrong logic, when kthread_park running in front of io_sq_thread. CPU#0 CPU#1 io_sq_thread_stop: int kthread(void *_create): kthread_park() __kthread_parkme(self); <<< Wrong kthread_stop() << wait for self->exited << clear_bit KTHREAD_SHOULD_PARK ret = threadfn(data); | |- io_sq_thread |- kthread_should_park() << false |- schedule() <<< nobody wake up stuck CPU#0 stuck CPU#1 So, use a new variable sqo_thread_started to ensure that io_sq_thread run first, then io_sq_thread_stop. Reported-by: syzbot+94324416c485d422fe15@syzkaller.appspotmail.com Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-08 13:41:12 +08:00
mutex_lock(&ctx->uring_lock);
if (!list_empty(&ctx->iopoll_list))
io_do_iopoll(ctx, &nr_events, 0);
if (to_submit && likely(!percpu_ref_is_dying(&ctx->refs)))
ret = io_submit_sqes(ctx, to_submit);
mutex_unlock(&ctx->uring_lock);
}
if (!io_sqring_full(ctx) && wq_has_sleeper(&ctx->sqo_sq_wait))
wake_up(&ctx->sqo_sq_wait);
return ret;
}
static void io_sqd_update_thread_idle(struct io_sq_data *sqd)
{
struct io_ring_ctx *ctx;
unsigned sq_thread_idle = 0;
list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) {
if (sq_thread_idle < ctx->sq_thread_idle)
sq_thread_idle = ctx->sq_thread_idle;
}
sqd->sq_thread_idle = sq_thread_idle;
}
static void io_sqd_init_new(struct io_sq_data *sqd)
{
struct io_ring_ctx *ctx;
while (!list_empty(&sqd->ctx_new_list)) {
ctx = list_first_entry(&sqd->ctx_new_list, struct io_ring_ctx, sqd_list);
list_move_tail(&ctx->sqd_list, &sqd->ctx_list);
complete(&ctx->sq_thread_comp);
}
io_sqd_update_thread_idle(sqd);
}
static int io_sq_thread(void *data)
{
struct cgroup_subsys_state *cur_css = NULL;
struct files_struct *old_files = current->files;
struct nsproxy *old_nsproxy = current->nsproxy;
const struct cred *old_cred = NULL;
struct io_sq_data *sqd = data;
struct io_ring_ctx *ctx;
unsigned long timeout = 0;
DEFINE_WAIT(wait);
task_lock(current);
current->files = NULL;
current->nsproxy = NULL;
task_unlock(current);
while (!kthread_should_stop()) {
int ret;
bool cap_entries, sqt_spin, needs_sched;
/*
* Any changes to the sqd lists are synchronized through the
* kthread parking. This synchronizes the thread vs users,
* the users are synchronized on the sqd->ctx_lock.
*/
io_uring: check kthread stopped flag when sq thread is unparked syzbot reports following issue: INFO: task syz-executor.2:12399 can't die for more than 143 seconds. task:syz-executor.2 state:D stack:28744 pid:12399 ppid: 8504 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:3773 [inline] __schedule+0x893/0x2170 kernel/sched/core.c:4522 schedule+0xcf/0x270 kernel/sched/core.c:4600 schedule_timeout+0x1d8/0x250 kernel/time/timer.c:1847 do_wait_for_common kernel/sched/completion.c:85 [inline] __wait_for_common kernel/sched/completion.c:106 [inline] wait_for_common kernel/sched/completion.c:117 [inline] wait_for_completion+0x163/0x260 kernel/sched/completion.c:138 kthread_stop+0x17a/0x720 kernel/kthread.c:596 io_put_sq_data fs/io_uring.c:7193 [inline] io_sq_thread_stop+0x452/0x570 fs/io_uring.c:7290 io_finish_async fs/io_uring.c:7297 [inline] io_sq_offload_create fs/io_uring.c:8015 [inline] io_uring_create fs/io_uring.c:9433 [inline] io_uring_setup+0x19b7/0x3730 fs/io_uring.c:9507 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45deb9 Code: Unable to access opcode bytes at RIP 0x45de8f. RSP: 002b:00007f174e51ac78 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9 RAX: ffffffffffffffda RBX: 0000000000008640 RCX: 000000000045deb9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 00000000000050e5 RBP: 000000000118bf58 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118bf2c R13: 00007ffed9ca723f R14: 00007f174e51b9c0 R15: 000000000118bf2c INFO: task syz-executor.2:12399 blocked for more than 143 seconds. Not tainted 5.10.0-rc3-next-20201110-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Currently we don't have a reproducer yet, but seems that there is a race in current codes: => io_put_sq_data ctx_list is empty now. | ==> kthread_park(sqd->thread); | | T1: sq thread is parked now. ==> kthread_stop(sqd->thread); | KTHREAD_SHOULD_STOP is set now.| ===> kthread_unpark(k); | | T2: sq thread is now unparkd, run again. | | T3: sq thread is now preempted out. | ===> wake_up_process(k); | | | T4: Since sqd ctx_list is empty, needs_sched will be true, | then sq thread sets task state to TASK_INTERRUPTIBLE, | and schedule, now sq thread will never be waken up. ===> wait_for_completion | I have artificially used mdelay() to simulate above race, will get same stack like this syzbot report, but to be honest, I'm not sure this code race triggers syzbot report. To fix this possible code race, when sq thread is unparked, need to check whether sq thread has been stopped. Reported-by: syzbot+03beeb595f074db9cfd1@syzkaller.appspotmail.com Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-19 17:44:46 +08:00
if (kthread_should_park()) {
kthread_parkme();
io_uring: check kthread stopped flag when sq thread is unparked syzbot reports following issue: INFO: task syz-executor.2:12399 can't die for more than 143 seconds. task:syz-executor.2 state:D stack:28744 pid:12399 ppid: 8504 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:3773 [inline] __schedule+0x893/0x2170 kernel/sched/core.c:4522 schedule+0xcf/0x270 kernel/sched/core.c:4600 schedule_timeout+0x1d8/0x250 kernel/time/timer.c:1847 do_wait_for_common kernel/sched/completion.c:85 [inline] __wait_for_common kernel/sched/completion.c:106 [inline] wait_for_common kernel/sched/completion.c:117 [inline] wait_for_completion+0x163/0x260 kernel/sched/completion.c:138 kthread_stop+0x17a/0x720 kernel/kthread.c:596 io_put_sq_data fs/io_uring.c:7193 [inline] io_sq_thread_stop+0x452/0x570 fs/io_uring.c:7290 io_finish_async fs/io_uring.c:7297 [inline] io_sq_offload_create fs/io_uring.c:8015 [inline] io_uring_create fs/io_uring.c:9433 [inline] io_uring_setup+0x19b7/0x3730 fs/io_uring.c:9507 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45deb9 Code: Unable to access opcode bytes at RIP 0x45de8f. RSP: 002b:00007f174e51ac78 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9 RAX: ffffffffffffffda RBX: 0000000000008640 RCX: 000000000045deb9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 00000000000050e5 RBP: 000000000118bf58 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118bf2c R13: 00007ffed9ca723f R14: 00007f174e51b9c0 R15: 000000000118bf2c INFO: task syz-executor.2:12399 blocked for more than 143 seconds. Not tainted 5.10.0-rc3-next-20201110-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Currently we don't have a reproducer yet, but seems that there is a race in current codes: => io_put_sq_data ctx_list is empty now. | ==> kthread_park(sqd->thread); | | T1: sq thread is parked now. ==> kthread_stop(sqd->thread); | KTHREAD_SHOULD_STOP is set now.| ===> kthread_unpark(k); | | T2: sq thread is now unparkd, run again. | | T3: sq thread is now preempted out. | ===> wake_up_process(k); | | | T4: Since sqd ctx_list is empty, needs_sched will be true, | then sq thread sets task state to TASK_INTERRUPTIBLE, | and schedule, now sq thread will never be waken up. ===> wait_for_completion | I have artificially used mdelay() to simulate above race, will get same stack like this syzbot report, but to be honest, I'm not sure this code race triggers syzbot report. To fix this possible code race, when sq thread is unparked, need to check whether sq thread has been stopped. Reported-by: syzbot+03beeb595f074db9cfd1@syzkaller.appspotmail.com Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-19 17:44:46 +08:00
/*
* When sq thread is unparked, in case the previous park operation
* comes from io_put_sq_data(), which means that sq thread is going
* to be stopped, so here needs to have a check.
*/
if (kthread_should_stop())
break;
}
if (unlikely(!list_empty(&sqd->ctx_new_list))) {
io_sqd_init_new(sqd);
timeout = jiffies + sqd->sq_thread_idle;
}
sqt_spin = false;
cap_entries = !list_is_singular(&sqd->ctx_list);
list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) {
if (current->cred != ctx->creds) {
if (old_cred)
revert_creds(old_cred);
old_cred = override_creds(ctx->creds);
io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL After making ext4 support iopoll method: let ext4_file_operations's iopoll method be iomap_dio_iopoll(), we found fio can easily hang in fio_ioring_getevents() with below fio job: rm -f testfile; sync; sudo fio -name=fiotest -filename=testfile -iodepth=128 -thread -rw=write -ioengine=io_uring -hipri=1 -sqthread_poll=1 -direct=1 -bs=4k -size=10G -numjobs=8 -runtime=2000 -group_reporting with IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL enabled. There are two issues that results in this hang, one reason is that when IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL are enabled, fio does not use io_uring_enter to get completed events, it relies on kernel io_sq_thread to poll for completed events. Another reason is that there is a race: when io_submit_sqes() in io_sq_thread() submits a batch of sqes, variable 'inflight' will record the number of submitted reqs, then io_sq_thread will poll for reqs which have been added to poll_list. But note, if some previous reqs have been punted to io worker, these reqs will won't be in poll_list timely. io_sq_thread() will only poll for a part of previous submitted reqs, and then find poll_list is empty, reset variable 'inflight' to be zero. If app just waits these deferred reqs and does not wake up io_sq_thread again, then hang happens. For app that entirely relies on io_sq_thread to poll completed requests, let io_iopoll_req_issued() wake up io_sq_thread properly when adding new element to poll_list, and when io_sq_thread prepares to sleep, check whether poll_list is empty again, if not empty, continue to poll. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25 22:12:08 +08:00
}
io_sq_thread_associate_blkcg(ctx, &cur_css);
#ifdef CONFIG_AUDIT
current->loginuid = ctx->loginuid;
current->sessionid = ctx->sessionid;
#endif
io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL After making ext4 support iopoll method: let ext4_file_operations's iopoll method be iomap_dio_iopoll(), we found fio can easily hang in fio_ioring_getevents() with below fio job: rm -f testfile; sync; sudo fio -name=fiotest -filename=testfile -iodepth=128 -thread -rw=write -ioengine=io_uring -hipri=1 -sqthread_poll=1 -direct=1 -bs=4k -size=10G -numjobs=8 -runtime=2000 -group_reporting with IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL enabled. There are two issues that results in this hang, one reason is that when IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL are enabled, fio does not use io_uring_enter to get completed events, it relies on kernel io_sq_thread to poll for completed events. Another reason is that there is a race: when io_submit_sqes() in io_sq_thread() submits a batch of sqes, variable 'inflight' will record the number of submitted reqs, then io_sq_thread will poll for reqs which have been added to poll_list. But note, if some previous reqs have been punted to io worker, these reqs will won't be in poll_list timely. io_sq_thread() will only poll for a part of previous submitted reqs, and then find poll_list is empty, reset variable 'inflight' to be zero. If app just waits these deferred reqs and does not wake up io_sq_thread again, then hang happens. For app that entirely relies on io_sq_thread to poll completed requests, let io_iopoll_req_issued() wake up io_sq_thread properly when adding new element to poll_list, and when io_sq_thread prepares to sleep, check whether poll_list is empty again, if not empty, continue to poll. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25 22:12:08 +08:00
ret = __io_sq_thread(ctx, cap_entries);
if (!sqt_spin && (ret > 0 || !list_empty(&ctx->iopoll_list)))
sqt_spin = true;
io_sq_thread_drop_mm_files();
}
if (sqt_spin || !time_after(jiffies, timeout)) {
io_run_task_work();
cond_resched();
if (sqt_spin)
timeout = jiffies + sqd->sq_thread_idle;
continue;
}
if (kthread_should_park())
continue;
needs_sched = true;
prepare_to_wait(&sqd->wait, &wait, TASK_INTERRUPTIBLE);
list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) {
if ((ctx->flags & IORING_SETUP_IOPOLL) &&
!list_empty_careful(&ctx->iopoll_list)) {
needs_sched = false;
break;
}
if (io_sqring_entries(ctx)) {
needs_sched = false;
break;
}
}
if (needs_sched) {
list_for_each_entry(ctx, &sqd->ctx_list, sqd_list)
io_ring_set_wakeup_flag(ctx);
schedule();
list_for_each_entry(ctx, &sqd->ctx_list, sqd_list)
io_ring_clear_wakeup_flag(ctx);
}
finish_wait(&sqd->wait, &wait);
timeout = jiffies + sqd->sq_thread_idle;
}
io_run_task_work();
if (cur_css)
io_sq_thread_unassociate_blkcg();
if (old_cred)
revert_creds(old_cred);
io_uring: park SQPOLL thread if it's percpu kthread expects this, or we can throw a warning on exit: WARNING: CPU: 0 PID: 7822 at kernel/kthread.c:399 __kthread_bind_mask+0x3b/0xc0 kernel/kthread.c:399 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 7822 Comm: syz-executor030 Not tainted 5.1.0-rc4-next-20190412 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x72b kernel/panic.c:214 __warn.cold+0x20/0x46 kernel/panic.c:576 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:179 [inline] fixup_bug arch/x86/kernel/traps.c:174 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:__kthread_bind_mask+0x3b/0xc0 kernel/kthread.c:399 Code: 48 89 fb e8 f7 ab 24 00 4c 89 e6 48 89 df e8 ac e1 02 00 31 ff 49 89 c4 48 89 c6 e8 7f ad 24 00 4d 85 e4 75 15 e8 d5 ab 24 00 <0f> 0b e8 ce ab 24 00 5b 41 5c 41 5d 41 5e 5d c3 e8 c0 ab 24 00 4c RSP: 0018:ffff8880a89bfbb8 EFLAGS: 00010293 RAX: ffff88808ca7a280 RBX: ffff8880a98e4380 RCX: ffffffff814bdd11 RDX: 0000000000000000 RSI: ffffffff814bdd1b RDI: 0000000000000007 RBP: ffff8880a89bfbd8 R08: ffff88808ca7a280 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffffffff87691148 R14: ffff8880a98e43a0 R15: ffffffff81c91e10 __kthread_bind kernel/kthread.c:412 [inline] kthread_unpark+0x123/0x160 kernel/kthread.c:480 kthread_stop+0xfa/0x6c0 kernel/kthread.c:556 io_sq_thread_stop fs/io_uring.c:2057 [inline] io_sq_thread_stop fs/io_uring.c:2052 [inline] io_finish_async+0xab/0x180 fs/io_uring.c:2064 io_ring_ctx_free fs/io_uring.c:2534 [inline] io_ring_ctx_wait_and_kill+0x133/0x510 fs/io_uring.c:2591 io_uring_release+0x42/0x50 fs/io_uring.c:2599 __fput+0x2e5/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x90a/0x2fa0 kernel/exit.c:876 do_group_exit+0x135/0x370 kernel/exit.c:980 __do_sys_exit_group kernel/exit.c:991 [inline] __se_sys_exit_group kernel/exit.c:989 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:989 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: syzbot+6d4a92619eb0ad08602b@syzkaller.appspotmail.com Fixes: 6c271ce2f1d5 ("io_uring: add submission polling") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-13 23:26:03 +08:00
task_lock(current);
current->files = old_files;
current->nsproxy = old_nsproxy;
task_unlock(current);
io_uring: fix infinite wait in khread_park() on io_finish_async() This fixes couple of races which lead to infinite wait of park completion with the following backtraces: [20801.303319] Call Trace: [20801.303321] ? __schedule+0x284/0x650 [20801.303323] schedule+0x33/0xc0 [20801.303324] schedule_timeout+0x1bc/0x210 [20801.303326] ? schedule+0x3d/0xc0 [20801.303327] ? schedule_timeout+0x1bc/0x210 [20801.303329] ? preempt_count_add+0x79/0xb0 [20801.303330] wait_for_completion+0xa5/0x120 [20801.303331] ? wake_up_q+0x70/0x70 [20801.303333] kthread_park+0x48/0x80 [20801.303335] io_finish_async+0x2c/0x70 [20801.303336] io_ring_ctx_wait_and_kill+0x95/0x180 [20801.303338] io_uring_release+0x1c/0x20 [20801.303339] __fput+0xad/0x210 [20801.303341] task_work_run+0x8f/0xb0 [20801.303342] exit_to_usermode_loop+0xa0/0xb0 [20801.303343] do_syscall_64+0xe0/0x100 [20801.303349] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [20801.303380] Call Trace: [20801.303383] ? __schedule+0x284/0x650 [20801.303384] schedule+0x33/0xc0 [20801.303386] io_sq_thread+0x38a/0x410 [20801.303388] ? __switch_to_asm+0x40/0x70 [20801.303390] ? wait_woken+0x80/0x80 [20801.303392] ? _raw_spin_lock_irqsave+0x17/0x40 [20801.303394] ? io_submit_sqes+0x120/0x120 [20801.303395] kthread+0x112/0x130 [20801.303396] ? kthread_create_on_node+0x60/0x60 [20801.303398] ret_from_fork+0x35/0x40 o kthread_park() waits for park completion, so io_sq_thread() loop should check kthread_should_park() along with khread_should_stop(), otherwise if kthread_park() is called before prepare_to_wait() the following schedule() never returns: CPU#0 CPU#1 io_sq_thread_stop(): io_sq_thread(): while(!kthread_should_stop() && !ctx->sqo_stop) { ctx->sqo_stop = 1; kthread_park() prepare_to_wait(); if (kthread_should_stop() { } schedule(); <<< nobody checks park flag, <<< so schedule and never return o if the flag ctx->sqo_stop is observed by the io_sq_thread() loop it is quite possible, that kthread_should_park() check and the following kthread_parkme() is never called, because kthread_park() has not been yet called, but few moments later is is called and waits there for park completion, which never happens, because kthread has already exited: CPU#0 CPU#1 io_sq_thread_stop(): io_sq_thread(): ctx->sqo_stop = 1; while(!kthread_should_stop() && !ctx->sqo_stop) { <<< observe sqo_stop and exit the loop } if (kthread_should_park()) kthread_parkme(); <<< never called, since was <<< never parked kthread_park() <<< waits forever for park completion In the current patch we quit the loop by only kthread_should_park() check (kthread_park() is synchronous, so kthread_should_stop() is never observed), and we abandon ->sqo_stop flag, since it is racy. At the end of the io_sq_thread() we unconditionally call parmke(), since we've exited the loop by the park flag. Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-16 16:53:57 +08:00
kthread_parkme();
io_uring: park SQPOLL thread if it's percpu kthread expects this, or we can throw a warning on exit: WARNING: CPU: 0 PID: 7822 at kernel/kthread.c:399 __kthread_bind_mask+0x3b/0xc0 kernel/kthread.c:399 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 7822 Comm: syz-executor030 Not tainted 5.1.0-rc4-next-20190412 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x72b kernel/panic.c:214 __warn.cold+0x20/0x46 kernel/panic.c:576 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:179 [inline] fixup_bug arch/x86/kernel/traps.c:174 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:__kthread_bind_mask+0x3b/0xc0 kernel/kthread.c:399 Code: 48 89 fb e8 f7 ab 24 00 4c 89 e6 48 89 df e8 ac e1 02 00 31 ff 49 89 c4 48 89 c6 e8 7f ad 24 00 4d 85 e4 75 15 e8 d5 ab 24 00 <0f> 0b e8 ce ab 24 00 5b 41 5c 41 5d 41 5e 5d c3 e8 c0 ab 24 00 4c RSP: 0018:ffff8880a89bfbb8 EFLAGS: 00010293 RAX: ffff88808ca7a280 RBX: ffff8880a98e4380 RCX: ffffffff814bdd11 RDX: 0000000000000000 RSI: ffffffff814bdd1b RDI: 0000000000000007 RBP: ffff8880a89bfbd8 R08: ffff88808ca7a280 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffffffff87691148 R14: ffff8880a98e43a0 R15: ffffffff81c91e10 __kthread_bind kernel/kthread.c:412 [inline] kthread_unpark+0x123/0x160 kernel/kthread.c:480 kthread_stop+0xfa/0x6c0 kernel/kthread.c:556 io_sq_thread_stop fs/io_uring.c:2057 [inline] io_sq_thread_stop fs/io_uring.c:2052 [inline] io_finish_async+0xab/0x180 fs/io_uring.c:2064 io_ring_ctx_free fs/io_uring.c:2534 [inline] io_ring_ctx_wait_and_kill+0x133/0x510 fs/io_uring.c:2591 io_uring_release+0x42/0x50 fs/io_uring.c:2599 __fput+0x2e5/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x90a/0x2fa0 kernel/exit.c:876 do_group_exit+0x135/0x370 kernel/exit.c:980 __do_sys_exit_group kernel/exit.c:991 [inline] __se_sys_exit_group kernel/exit.c:989 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:989 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: syzbot+6d4a92619eb0ad08602b@syzkaller.appspotmail.com Fixes: 6c271ce2f1d5 ("io_uring: add submission polling") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-13 23:26:03 +08:00
return 0;
}
struct io_wait_queue {
struct wait_queue_entry wq;
struct io_ring_ctx *ctx;
unsigned to_wait;
unsigned nr_timeouts;
};
static inline bool io_should_wake(struct io_wait_queue *iowq, bool noflush)
{
struct io_ring_ctx *ctx = iowq->ctx;
/*
* Wake up if we have enough events, or if a timeout occurred since we
* started waiting. For timeouts, we always want to return to userspace,
* regardless of event count.
*/
return io_cqring_events(ctx, noflush) >= iowq->to_wait ||
atomic_read(&ctx->cq_timeouts) != iowq->nr_timeouts;
}
static int io_wake_function(struct wait_queue_entry *curr, unsigned int mode,
int wake_flags, void *key)
{
struct io_wait_queue *iowq = container_of(curr, struct io_wait_queue,
wq);
/* use noflush == true, as we can't safely rely on locking context */
if (!io_should_wake(iowq, true))
return -1;
return autoremove_wake_function(curr, mode, wake_flags, key);
}
static int io_run_task_work_sig(void)
{
if (io_run_task_work())
return 1;
if (!signal_pending(current))
return 0;
if (test_tsk_thread_flag(current, TIF_NOTIFY_SIGNAL))
return -ERESTARTSYS;
return -EINTR;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/*
* Wait until events become available, if we don't already have some. The
* application must reap them itself, as they reside on the shared cq ring.
*/
static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events,
const sigset_t __user *sig, size_t sigsz,
struct __kernel_timespec __user *uts)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_wait_queue iowq = {
.wq = {
.private = current,
.func = io_wake_function,
.entry = LIST_HEAD_INIT(iowq.wq.entry),
},
.ctx = ctx,
.to_wait = min_events,
};
struct io_rings *rings = ctx->rings;
struct timespec64 ts;
signed long timeout = 0;
int ret = 0;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
do {
if (io_cqring_events(ctx, false) >= min_events)
return 0;
if (!io_run_task_work())
break;
} while (1);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
if (sig) {
#ifdef CONFIG_COMPAT
if (in_compat_syscall())
ret = set_compat_user_sigmask((const compat_sigset_t __user *)sig,
sigsz);
else
#endif
ret = set_user_sigmask(sig, sigsz);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
if (ret)
return ret;
}
if (uts) {
if (get_timespec64(&ts, uts))
return -EFAULT;
timeout = timespec64_to_jiffies(&ts);
}
iowq.nr_timeouts = atomic_read(&ctx->cq_timeouts);
trace_io_uring_cqring_wait(ctx, min_events);
do {
prepare_to_wait_exclusive(&ctx->wait, &iowq.wq,
TASK_INTERRUPTIBLE);
/* make sure we run task_work before checking for signals */
ret = io_run_task_work_sig();
if (ret > 0)
continue;
else if (ret < 0)
break;
if (io_should_wake(&iowq, false))
break;
if (uts) {
timeout = schedule_timeout(timeout);
if (timeout == 0) {
ret = -ETIME;
break;
}
} else {
schedule();
}
} while (1);
finish_wait(&ctx->wait, &iowq.wq);
restore_saved_sigmask_unless(ret == -EINTR);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return READ_ONCE(rings->cq.head) == READ_ONCE(rings->cq.tail) ? ret : 0;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static void __io_sqe_files_unregister(struct io_ring_ctx *ctx)
{
#if defined(CONFIG_UNIX)
if (ctx->ring_sock) {
struct sock *sock = ctx->ring_sock->sk;
struct sk_buff *skb;
while ((skb = skb_dequeue(&sock->sk_receive_queue)) != NULL)
kfree_skb(skb);
}
#else
int i;
for (i = 0; i < ctx->nr_user_files; i++) {
struct file *file;
file = io_file_from_index(ctx, i);
if (file)
fput(file);
}
#endif
}
static void io_file_ref_kill(struct percpu_ref *ref)
{
struct fixed_file_data *data;
data = container_of(ref, struct fixed_file_data, refs);
complete(&data->done);
}
static int io_sqe_files_unregister(struct io_ring_ctx *ctx)
{
struct fixed_file_data *data = ctx->file_data;
struct fixed_file_ref_node *ref_node = NULL;
unsigned nr_tables, i;
if (!data)
return -ENXIO;
spin_lock_bh(&data->lock);
ref_node = data->node;
spin_unlock_bh(&data->lock);
if (ref_node)
percpu_ref_kill(&ref_node->refs);
percpu_ref_kill(&data->refs);
/* wait for all refs nodes to complete */
flush_delayed_work(&ctx->file_put_work);
wait_for_completion(&data->done);
__io_sqe_files_unregister(ctx);
nr_tables = DIV_ROUND_UP(ctx->nr_user_files, IORING_MAX_FILES_TABLE);
for (i = 0; i < nr_tables; i++)
kfree(data->table[i].files);
kfree(data->table);
percpu_ref_exit(&data->refs);
kfree(data);
ctx->file_data = NULL;
ctx->nr_user_files = 0;
return 0;
}
static void io_put_sq_data(struct io_sq_data *sqd)
{
if (refcount_dec_and_test(&sqd->refs)) {
io_uring: fix infinite wait in khread_park() on io_finish_async() This fixes couple of races which lead to infinite wait of park completion with the following backtraces: [20801.303319] Call Trace: [20801.303321] ? __schedule+0x284/0x650 [20801.303323] schedule+0x33/0xc0 [20801.303324] schedule_timeout+0x1bc/0x210 [20801.303326] ? schedule+0x3d/0xc0 [20801.303327] ? schedule_timeout+0x1bc/0x210 [20801.303329] ? preempt_count_add+0x79/0xb0 [20801.303330] wait_for_completion+0xa5/0x120 [20801.303331] ? wake_up_q+0x70/0x70 [20801.303333] kthread_park+0x48/0x80 [20801.303335] io_finish_async+0x2c/0x70 [20801.303336] io_ring_ctx_wait_and_kill+0x95/0x180 [20801.303338] io_uring_release+0x1c/0x20 [20801.303339] __fput+0xad/0x210 [20801.303341] task_work_run+0x8f/0xb0 [20801.303342] exit_to_usermode_loop+0xa0/0xb0 [20801.303343] do_syscall_64+0xe0/0x100 [20801.303349] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [20801.303380] Call Trace: [20801.303383] ? __schedule+0x284/0x650 [20801.303384] schedule+0x33/0xc0 [20801.303386] io_sq_thread+0x38a/0x410 [20801.303388] ? __switch_to_asm+0x40/0x70 [20801.303390] ? wait_woken+0x80/0x80 [20801.303392] ? _raw_spin_lock_irqsave+0x17/0x40 [20801.303394] ? io_submit_sqes+0x120/0x120 [20801.303395] kthread+0x112/0x130 [20801.303396] ? kthread_create_on_node+0x60/0x60 [20801.303398] ret_from_fork+0x35/0x40 o kthread_park() waits for park completion, so io_sq_thread() loop should check kthread_should_park() along with khread_should_stop(), otherwise if kthread_park() is called before prepare_to_wait() the following schedule() never returns: CPU#0 CPU#1 io_sq_thread_stop(): io_sq_thread(): while(!kthread_should_stop() && !ctx->sqo_stop) { ctx->sqo_stop = 1; kthread_park() prepare_to_wait(); if (kthread_should_stop() { } schedule(); <<< nobody checks park flag, <<< so schedule and never return o if the flag ctx->sqo_stop is observed by the io_sq_thread() loop it is quite possible, that kthread_should_park() check and the following kthread_parkme() is never called, because kthread_park() has not been yet called, but few moments later is is called and waits there for park completion, which never happens, because kthread has already exited: CPU#0 CPU#1 io_sq_thread_stop(): io_sq_thread(): ctx->sqo_stop = 1; while(!kthread_should_stop() && !ctx->sqo_stop) { <<< observe sqo_stop and exit the loop } if (kthread_should_park()) kthread_parkme(); <<< never called, since was <<< never parked kthread_park() <<< waits forever for park completion In the current patch we quit the loop by only kthread_should_park() check (kthread_park() is synchronous, so kthread_should_stop() is never observed), and we abandon ->sqo_stop flag, since it is racy. At the end of the io_sq_thread() we unconditionally call parmke(), since we've exited the loop by the park flag. Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-16 16:53:57 +08:00
/*
* The park is a bit of a work-around, without it we get
* warning spews on shutdown with SQPOLL set and affinity
* set to a single CPU.
*/
if (sqd->thread) {
kthread_park(sqd->thread);
kthread_stop(sqd->thread);
}
kfree(sqd);
}
}
static struct io_sq_data *io_attach_sq_data(struct io_uring_params *p)
{
struct io_ring_ctx *ctx_attach;
struct io_sq_data *sqd;
struct fd f;
f = fdget(p->wq_fd);
if (!f.file)
return ERR_PTR(-ENXIO);
if (f.file->f_op != &io_uring_fops) {
fdput(f);
return ERR_PTR(-EINVAL);
}
ctx_attach = f.file->private_data;
sqd = ctx_attach->sq_data;
if (!sqd) {
fdput(f);
return ERR_PTR(-EINVAL);
}
refcount_inc(&sqd->refs);
fdput(f);
return sqd;
}
static struct io_sq_data *io_get_sq_data(struct io_uring_params *p)
{
struct io_sq_data *sqd;
if (p->flags & IORING_SETUP_ATTACH_WQ)
return io_attach_sq_data(p);
sqd = kzalloc(sizeof(*sqd), GFP_KERNEL);
if (!sqd)
return ERR_PTR(-ENOMEM);
refcount_set(&sqd->refs, 1);
INIT_LIST_HEAD(&sqd->ctx_list);
INIT_LIST_HEAD(&sqd->ctx_new_list);
mutex_init(&sqd->ctx_lock);
mutex_init(&sqd->lock);
init_waitqueue_head(&sqd->wait);
return sqd;
}
static void io_sq_thread_unpark(struct io_sq_data *sqd)
__releases(&sqd->lock)
{
if (!sqd->thread)
return;
kthread_unpark(sqd->thread);
mutex_unlock(&sqd->lock);
}
static void io_sq_thread_park(struct io_sq_data *sqd)
__acquires(&sqd->lock)
{
if (!sqd->thread)
return;
mutex_lock(&sqd->lock);
kthread_park(sqd->thread);
}
static void io_sq_thread_stop(struct io_ring_ctx *ctx)
{
struct io_sq_data *sqd = ctx->sq_data;
if (sqd) {
if (sqd->thread) {
/*
* We may arrive here from the error branch in
* io_sq_offload_create() where the kthread is created
* without being waked up, thus wake it up now to make
* sure the wait will complete.
*/
wake_up_process(sqd->thread);
wait_for_completion(&ctx->sq_thread_comp);
io_sq_thread_park(sqd);
}
mutex_lock(&sqd->ctx_lock);
list_del(&ctx->sqd_list);
io_sqd_update_thread_idle(sqd);
mutex_unlock(&sqd->ctx_lock);
if (sqd->thread)
io_sq_thread_unpark(sqd);
io_put_sq_data(sqd);
ctx->sq_data = NULL;
}
}
static void io_finish_async(struct io_ring_ctx *ctx)
{
io_sq_thread_stop(ctx);
if (ctx->io_wq) {
io_wq_destroy(ctx->io_wq);
ctx->io_wq = NULL;
}
}
#if defined(CONFIG_UNIX)
/*
* Ensure the UNIX gc is aware of our file set, so we are certain that
* the io_uring can be safely unregistered on process exit, even if we have
* loops in the file referencing.
*/
static int __io_sqe_files_scm(struct io_ring_ctx *ctx, int nr, int offset)
{
struct sock *sk = ctx->ring_sock->sk;
struct scm_fp_list *fpl;
struct sk_buff *skb;
int i, nr_files;
fpl = kzalloc(sizeof(*fpl), GFP_KERNEL);
if (!fpl)
return -ENOMEM;
skb = alloc_skb(0, GFP_KERNEL);
if (!skb) {
kfree(fpl);
return -ENOMEM;
}
skb->sk = sk;
nr_files = 0;
fpl->user = get_uid(ctx->user);
for (i = 0; i < nr; i++) {
struct file *file = io_file_from_index(ctx, i + offset);
if (!file)
continue;
fpl->fp[nr_files] = get_file(file);
unix_inflight(fpl->user, fpl->fp[nr_files]);
nr_files++;
}
if (nr_files) {
fpl->max = SCM_MAX_FD;
fpl->count = nr_files;
UNIXCB(skb).fp = fpl;
skb->destructor = unix_destruct_scm;
refcount_add(skb->truesize, &sk->sk_wmem_alloc);
skb_queue_head(&sk->sk_receive_queue, skb);
for (i = 0; i < nr_files; i++)
fput(fpl->fp[i]);
} else {
kfree_skb(skb);
kfree(fpl);
}
return 0;
}
/*
* If UNIX sockets are enabled, fd passing can cause a reference cycle which
* causes regular reference counting to break down. We rely on the UNIX
* garbage collection to take care of this problem for us.
*/
static int io_sqe_files_scm(struct io_ring_ctx *ctx)
{
unsigned left, total;
int ret = 0;
total = 0;
left = ctx->nr_user_files;
while (left) {
unsigned this_files = min_t(unsigned, left, SCM_MAX_FD);
ret = __io_sqe_files_scm(ctx, this_files, total);
if (ret)
break;
left -= this_files;
total += this_files;
}
if (!ret)
return 0;
while (total < ctx->nr_user_files) {
struct file *file = io_file_from_index(ctx, total);
if (file)
fput(file);
total++;
}
return ret;
}
#else
static int io_sqe_files_scm(struct io_ring_ctx *ctx)
{
return 0;
}
#endif
static int io_sqe_alloc_file_tables(struct fixed_file_data *file_data,
unsigned nr_tables, unsigned nr_files)
{
int i;
for (i = 0; i < nr_tables; i++) {
struct fixed_file_table *table = &file_data->table[i];
unsigned this_files;
this_files = min(nr_files, IORING_MAX_FILES_TABLE);
table->files = kcalloc(this_files, sizeof(struct file *),
GFP_KERNEL);
if (!table->files)
break;
nr_files -= this_files;
}
if (i == nr_tables)
return 0;
for (i = 0; i < nr_tables; i++) {
struct fixed_file_table *table = &file_data->table[i];
kfree(table->files);
}
return 1;
}
static void io_ring_file_put(struct io_ring_ctx *ctx, struct file *file)
{
#if defined(CONFIG_UNIX)
struct sock *sock = ctx->ring_sock->sk;
struct sk_buff_head list, *head = &sock->sk_receive_queue;
struct sk_buff *skb;
int i;
__skb_queue_head_init(&list);
/*
* Find the skb that holds this file in its SCM_RIGHTS. When found,
* remove this entry and rearrange the file array.
*/
skb = skb_dequeue(head);
while (skb) {
struct scm_fp_list *fp;
fp = UNIXCB(skb).fp;
for (i = 0; i < fp->count; i++) {
int left;
if (fp->fp[i] != file)
continue;
unix_notinflight(fp->user, fp->fp[i]);
left = fp->count - 1 - i;
if (left) {
memmove(&fp->fp[i], &fp->fp[i + 1],
left * sizeof(struct file *));
}
fp->count--;
if (!fp->count) {
kfree_skb(skb);
skb = NULL;
} else {
__skb_queue_tail(&list, skb);
}
fput(file);
file = NULL;
break;
}
if (!file)
break;
__skb_queue_tail(&list, skb);
skb = skb_dequeue(head);
}
if (skb_peek(&list)) {
spin_lock_irq(&head->lock);
while ((skb = __skb_dequeue(&list)) != NULL)
__skb_queue_tail(head, skb);
spin_unlock_irq(&head->lock);
}
#else
fput(file);
#endif
}
struct io_file_put {
struct list_head list;
struct file *file;
};
static void __io_file_put_work(struct fixed_file_ref_node *ref_node)
{
struct fixed_file_data *file_data = ref_node->file_data;
struct io_ring_ctx *ctx = file_data->ctx;
struct io_file_put *pfile, *tmp;
list_for_each_entry_safe(pfile, tmp, &ref_node->file_list, list) {
list_del(&pfile->list);
io_ring_file_put(ctx, pfile->file);
kfree(pfile);
}
percpu_ref_exit(&ref_node->refs);
kfree(ref_node);
percpu_ref_put(&file_data->refs);
}
static void io_file_put_work(struct work_struct *work)
{
struct io_ring_ctx *ctx;
struct llist_node *node;
ctx = container_of(work, struct io_ring_ctx, file_put_work.work);
node = llist_del_all(&ctx->file_put_llist);
while (node) {
struct fixed_file_ref_node *ref_node;
struct llist_node *next = node->next;
ref_node = llist_entry(node, struct fixed_file_ref_node, llist);
__io_file_put_work(ref_node);
node = next;
}
}
static void io_file_data_ref_zero(struct percpu_ref *ref)
{
struct fixed_file_ref_node *ref_node;
struct fixed_file_data *data;
struct io_ring_ctx *ctx;
bool first_add = false;
int delay = HZ;
ref_node = container_of(ref, struct fixed_file_ref_node, refs);
data = ref_node->file_data;
ctx = data->ctx;
spin_lock_bh(&data->lock);
ref_node->done = true;
while (!list_empty(&data->ref_list)) {
ref_node = list_first_entry(&data->ref_list,
struct fixed_file_ref_node, node);
/* recycle ref nodes in order */
if (!ref_node->done)
break;
list_del(&ref_node->node);
first_add |= llist_add(&ref_node->llist, &ctx->file_put_llist);
}
spin_unlock_bh(&data->lock);
if (percpu_ref_is_dying(&data->refs))
delay = 0;
if (!delay)
mod_delayed_work(system_wq, &ctx->file_put_work, 0);
else if (first_add)
queue_delayed_work(system_wq, &ctx->file_put_work, delay);
}
static struct fixed_file_ref_node *alloc_fixed_file_ref_node(
struct io_ring_ctx *ctx)
{
struct fixed_file_ref_node *ref_node;
ref_node = kzalloc(sizeof(*ref_node), GFP_KERNEL);
if (!ref_node)
return ERR_PTR(-ENOMEM);
if (percpu_ref_init(&ref_node->refs, io_file_data_ref_zero,
0, GFP_KERNEL)) {
kfree(ref_node);
return ERR_PTR(-ENOMEM);
}
INIT_LIST_HEAD(&ref_node->node);
INIT_LIST_HEAD(&ref_node->file_list);
ref_node->file_data = ctx->file_data;
ref_node->done = false;
return ref_node;
}
static void destroy_fixed_file_ref_node(struct fixed_file_ref_node *ref_node)
{
percpu_ref_exit(&ref_node->refs);
kfree(ref_node);
}
static int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg,
unsigned nr_args)
{
__s32 __user *fds = (__s32 __user *) arg;
unsigned nr_tables, i;
struct file *file;
int fd, ret = -ENOMEM;
struct fixed_file_ref_node *ref_node;
struct fixed_file_data *file_data;
if (ctx->file_data)
return -EBUSY;
if (!nr_args)
return -EINVAL;
if (nr_args > IORING_MAX_FIXED_FILES)
return -EMFILE;
file_data = kzalloc(sizeof(*ctx->file_data), GFP_KERNEL);
if (!file_data)
return -ENOMEM;
file_data->ctx = ctx;
init_completion(&file_data->done);
INIT_LIST_HEAD(&file_data->ref_list);
spin_lock_init(&file_data->lock);
nr_tables = DIV_ROUND_UP(nr_args, IORING_MAX_FILES_TABLE);
file_data->table = kcalloc(nr_tables, sizeof(*file_data->table),
GFP_KERNEL);
if (!file_data->table)
goto out_free;
if (percpu_ref_init(&file_data->refs, io_file_ref_kill,
PERCPU_REF_ALLOW_REINIT, GFP_KERNEL))
goto out_free;
if (io_sqe_alloc_file_tables(file_data, nr_tables, nr_args))
goto out_ref;
io_uring: fix error path cleanup in io_sqe_files_register() syzbot reports the following crash: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8927 Comm: syz-executor.3 Not tainted 5.9.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:io_file_from_index fs/io_uring.c:5963 [inline] RIP: 0010:io_sqe_files_register fs/io_uring.c:7369 [inline] RIP: 0010:__io_uring_register fs/io_uring.c:9463 [inline] RIP: 0010:__do_sys_io_uring_register+0x2fd2/0x3ee0 fs/io_uring.c:9553 Code: ec 03 49 c1 ee 03 49 01 ec 49 01 ee e8 57 61 9c ff 41 80 3c 24 00 0f 85 9b 09 00 00 4d 8b af b8 01 00 00 4c 89 e8 48 c1 e8 03 <80> 3c 28 00 0f 85 76 09 00 00 49 8b 55 00 89 d8 c1 f8 09 48 98 4c RSP: 0018:ffffc90009137d68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc9000ef2a000 RDX: 0000000000040000 RSI: ffffffff81d81dd9 RDI: 0000000000000005 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffed1012882a37 R13: 0000000000000000 R14: ffffed1012882a38 R15: ffff888094415000 FS: 00007f4266f3c700(0000) GS:ffff8880ae500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000118c000 CR3: 000000008e57d000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45de59 Code: 0d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4266f3bc78 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab RAX: ffffffffffffffda RBX: 00000000000083c0 RCX: 000000000045de59 RDX: 0000000020000280 RSI: 0000000000000002 RDI: 0000000000000005 RBP: 000000000118bf68 R08: 0000000000000000 R09: 0000000000000000 R10: 40000000000000a1 R11: 0000000000000246 R12: 000000000118bf2c R13: 00007fff2fa4f12f R14: 00007f4266f3c9c0 R15: 000000000118bf2c Modules linked in: ---[ end trace 2a40a195e2d5e6e6 ]--- RIP: 0010:io_file_from_index fs/io_uring.c:5963 [inline] RIP: 0010:io_sqe_files_register fs/io_uring.c:7369 [inline] RIP: 0010:__io_uring_register fs/io_uring.c:9463 [inline] RIP: 0010:__do_sys_io_uring_register+0x2fd2/0x3ee0 fs/io_uring.c:9553 Code: ec 03 49 c1 ee 03 49 01 ec 49 01 ee e8 57 61 9c ff 41 80 3c 24 00 0f 85 9b 09 00 00 4d 8b af b8 01 00 00 4c 89 e8 48 c1 e8 03 <80> 3c 28 00 0f 85 76 09 00 00 49 8b 55 00 89 d8 c1 f8 09 48 98 4c RSP: 0018:ffffc90009137d68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc9000ef2a000 RDX: 0000000000040000 RSI: ffffffff81d81dd9 RDI: 0000000000000005 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffed1012882a37 R13: 0000000000000000 R14: ffffed1012882a38 R15: ffff888094415000 FS: 00007f4266f3c700(0000) GS:ffff8880ae400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000074a918 CR3: 000000008e57d000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 which is a copy of fget failure condition jumping to cleanup, but the cleanup requires ctx->file_data to be assigned. Assign it when setup, and ensure that we clear it again for the error path exit. Fixes: 5398ae698525 ("io_uring: clean file_data access in files_register") Reported-by: syzbot+f4ebcc98223dafd8991e@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-14 21:35:57 +08:00
ctx->file_data = file_data;
for (i = 0; i < nr_args; i++, ctx->nr_user_files++) {
struct fixed_file_table *table;
unsigned index;
if (copy_from_user(&fd, &fds[i], sizeof(fd))) {
ret = -EFAULT;
goto out_fput;
}
/* allow sparse sets */
if (fd == -1)
continue;
file = fget(fd);
ret = -EBADF;
if (!file)
goto out_fput;
/*
* Don't allow io_uring instances to be registered. If UNIX
* isn't enabled, then this causes a reference cycle and this
* instance can never get freed. If UNIX is enabled we'll
* handle it just fine, but there's still no point in allowing
* a ring fd as it doesn't support regular read/write anyway.
*/
if (file->f_op == &io_uring_fops) {
fput(file);
goto out_fput;
}
table = &file_data->table[i >> IORING_FILE_TABLE_SHIFT];
index = i & IORING_FILE_TABLE_MASK;
table->files[index] = file;
}
ret = io_sqe_files_scm(ctx);
if (ret) {
io_sqe_files_unregister(ctx);
return ret;
}
ref_node = alloc_fixed_file_ref_node(ctx);
if (IS_ERR(ref_node)) {
io_sqe_files_unregister(ctx);
return PTR_ERR(ref_node);
}
file_data->node = ref_node;
spin_lock_bh(&file_data->lock);
list_add_tail(&ref_node->node, &file_data->ref_list);
spin_unlock_bh(&file_data->lock);
percpu_ref_get(&file_data->refs);
return ret;
out_fput:
for (i = 0; i < ctx->nr_user_files; i++) {
file = io_file_from_index(ctx, i);
if (file)
fput(file);
}
for (i = 0; i < nr_tables; i++)
kfree(file_data->table[i].files);
ctx->nr_user_files = 0;
out_ref:
percpu_ref_exit(&file_data->refs);
out_free:
kfree(file_data->table);
kfree(file_data);
io_uring: fix error path cleanup in io_sqe_files_register() syzbot reports the following crash: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8927 Comm: syz-executor.3 Not tainted 5.9.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:io_file_from_index fs/io_uring.c:5963 [inline] RIP: 0010:io_sqe_files_register fs/io_uring.c:7369 [inline] RIP: 0010:__io_uring_register fs/io_uring.c:9463 [inline] RIP: 0010:__do_sys_io_uring_register+0x2fd2/0x3ee0 fs/io_uring.c:9553 Code: ec 03 49 c1 ee 03 49 01 ec 49 01 ee e8 57 61 9c ff 41 80 3c 24 00 0f 85 9b 09 00 00 4d 8b af b8 01 00 00 4c 89 e8 48 c1 e8 03 <80> 3c 28 00 0f 85 76 09 00 00 49 8b 55 00 89 d8 c1 f8 09 48 98 4c RSP: 0018:ffffc90009137d68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc9000ef2a000 RDX: 0000000000040000 RSI: ffffffff81d81dd9 RDI: 0000000000000005 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffed1012882a37 R13: 0000000000000000 R14: ffffed1012882a38 R15: ffff888094415000 FS: 00007f4266f3c700(0000) GS:ffff8880ae500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000118c000 CR3: 000000008e57d000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45de59 Code: 0d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4266f3bc78 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab RAX: ffffffffffffffda RBX: 00000000000083c0 RCX: 000000000045de59 RDX: 0000000020000280 RSI: 0000000000000002 RDI: 0000000000000005 RBP: 000000000118bf68 R08: 0000000000000000 R09: 0000000000000000 R10: 40000000000000a1 R11: 0000000000000246 R12: 000000000118bf2c R13: 00007fff2fa4f12f R14: 00007f4266f3c9c0 R15: 000000000118bf2c Modules linked in: ---[ end trace 2a40a195e2d5e6e6 ]--- RIP: 0010:io_file_from_index fs/io_uring.c:5963 [inline] RIP: 0010:io_sqe_files_register fs/io_uring.c:7369 [inline] RIP: 0010:__io_uring_register fs/io_uring.c:9463 [inline] RIP: 0010:__do_sys_io_uring_register+0x2fd2/0x3ee0 fs/io_uring.c:9553 Code: ec 03 49 c1 ee 03 49 01 ec 49 01 ee e8 57 61 9c ff 41 80 3c 24 00 0f 85 9b 09 00 00 4d 8b af b8 01 00 00 4c 89 e8 48 c1 e8 03 <80> 3c 28 00 0f 85 76 09 00 00 49 8b 55 00 89 d8 c1 f8 09 48 98 4c RSP: 0018:ffffc90009137d68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc9000ef2a000 RDX: 0000000000040000 RSI: ffffffff81d81dd9 RDI: 0000000000000005 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffed1012882a37 R13: 0000000000000000 R14: ffffed1012882a38 R15: ffff888094415000 FS: 00007f4266f3c700(0000) GS:ffff8880ae400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000074a918 CR3: 000000008e57d000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 which is a copy of fget failure condition jumping to cleanup, but the cleanup requires ctx->file_data to be assigned. Assign it when setup, and ensure that we clear it again for the error path exit. Fixes: 5398ae698525 ("io_uring: clean file_data access in files_register") Reported-by: syzbot+f4ebcc98223dafd8991e@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-14 21:35:57 +08:00
ctx->file_data = NULL;
return ret;
}
static int io_sqe_file_register(struct io_ring_ctx *ctx, struct file *file,
int index)
{
#if defined(CONFIG_UNIX)
struct sock *sock = ctx->ring_sock->sk;
struct sk_buff_head *head = &sock->sk_receive_queue;
struct sk_buff *skb;
/*
* See if we can merge this file into an existing skb SCM_RIGHTS
* file set. If there's no room, fall back to allocating a new skb
* and filling it in.
*/
spin_lock_irq(&head->lock);
skb = skb_peek(head);
if (skb) {
struct scm_fp_list *fpl = UNIXCB(skb).fp;
if (fpl->count < SCM_MAX_FD) {
__skb_unlink(skb, head);
spin_unlock_irq(&head->lock);
fpl->fp[fpl->count] = get_file(file);
unix_inflight(fpl->user, fpl->fp[fpl->count]);
fpl->count++;
spin_lock_irq(&head->lock);
__skb_queue_head(head, skb);
} else {
skb = NULL;
}
}
spin_unlock_irq(&head->lock);
if (skb) {
fput(file);
return 0;
}
return __io_sqe_files_scm(ctx, 1, index);
#else
return 0;
#endif
}
static int io_queue_file_removal(struct fixed_file_data *data,
struct file *file)
{
struct io_file_put *pfile;
struct fixed_file_ref_node *ref_node = data->node;
pfile = kzalloc(sizeof(*pfile), GFP_KERNEL);
if (!pfile)
return -ENOMEM;
pfile->file = file;
list_add(&pfile->list, &ref_node->file_list);
return 0;
}
static int __io_sqe_files_update(struct io_ring_ctx *ctx,
struct io_uring_files_update *up,
unsigned nr_args)
{
struct fixed_file_data *data = ctx->file_data;
struct fixed_file_ref_node *ref_node;
struct file *file;
__s32 __user *fds;
int fd, i, err;
__u32 done;
bool needs_switch = false;
if (check_add_overflow(up->offset, nr_args, &done))
return -EOVERFLOW;
if (done > ctx->nr_user_files)
return -EINVAL;
ref_node = alloc_fixed_file_ref_node(ctx);
if (IS_ERR(ref_node))
return PTR_ERR(ref_node);
done = 0;
fds = u64_to_user_ptr(up->fds);
while (nr_args) {
struct fixed_file_table *table;
unsigned index;
err = 0;
if (copy_from_user(&fd, &fds[done], sizeof(fd))) {
err = -EFAULT;
break;
}
i = array_index_nospec(up->offset, ctx->nr_user_files);
table = &ctx->file_data->table[i >> IORING_FILE_TABLE_SHIFT];
index = i & IORING_FILE_TABLE_MASK;
if (table->files[index]) {
file = table->files[index];
err = io_queue_file_removal(data, file);
if (err)
break;
table->files[index] = NULL;
needs_switch = true;
}
if (fd != -1) {
file = fget(fd);
if (!file) {
err = -EBADF;
break;
}
/*
* Don't allow io_uring instances to be registered. If
* UNIX isn't enabled, then this causes a reference
* cycle and this instance can never get freed. If UNIX
* is enabled we'll handle it just fine, but there's
* still no point in allowing a ring fd as it doesn't
* support regular read/write anyway.
*/
if (file->f_op == &io_uring_fops) {
fput(file);
err = -EBADF;
break;
}
table->files[index] = file;
err = io_sqe_file_register(ctx, file, i);
io_uring: fix memleak in __io_sqe_files_update() I got a memleak report when doing some fuzz test: BUG: memory leak unreferenced object 0xffff888113e02300 (size 488): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ a0 a4 ce 19 81 88 ff ff 60 ce 09 0d 81 88 ff ff ........`....... backtrace: [<00000000129a84ec>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<00000000129a84ec>] __alloc_file+0x25/0x310 fs/file_table.c:101 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 BUG: memory leak unreferenced object 0xffff8881152dd5e0 (size 16): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 16 bytes): 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000074caa794>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<0000000074caa794>] lsm_file_alloc security/security.c:567 [inline] [<0000000074caa794>] security_file_alloc+0x32/0x160 security/security.c:1440 [<00000000c6745ea3>] __alloc_file+0xba/0x310 fs/file_table.c:106 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If io_sqe_file_register() failed, we need put the file that get by fget() to avoid the memleak. Fixes: c3a31e605620 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09 18:11:41 +08:00
if (err) {
table->files[index] = NULL;
io_uring: fix memleak in __io_sqe_files_update() I got a memleak report when doing some fuzz test: BUG: memory leak unreferenced object 0xffff888113e02300 (size 488): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ a0 a4 ce 19 81 88 ff ff 60 ce 09 0d 81 88 ff ff ........`....... backtrace: [<00000000129a84ec>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<00000000129a84ec>] __alloc_file+0x25/0x310 fs/file_table.c:101 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 BUG: memory leak unreferenced object 0xffff8881152dd5e0 (size 16): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 16 bytes): 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000074caa794>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<0000000074caa794>] lsm_file_alloc security/security.c:567 [inline] [<0000000074caa794>] security_file_alloc+0x32/0x160 security/security.c:1440 [<00000000c6745ea3>] __alloc_file+0xba/0x310 fs/file_table.c:106 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If io_sqe_file_register() failed, we need put the file that get by fget() to avoid the memleak. Fixes: c3a31e605620 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09 18:11:41 +08:00
fput(file);
break;
io_uring: fix memleak in __io_sqe_files_update() I got a memleak report when doing some fuzz test: BUG: memory leak unreferenced object 0xffff888113e02300 (size 488): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ a0 a4 ce 19 81 88 ff ff 60 ce 09 0d 81 88 ff ff ........`....... backtrace: [<00000000129a84ec>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<00000000129a84ec>] __alloc_file+0x25/0x310 fs/file_table.c:101 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 BUG: memory leak unreferenced object 0xffff8881152dd5e0 (size 16): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 16 bytes): 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000074caa794>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<0000000074caa794>] lsm_file_alloc security/security.c:567 [inline] [<0000000074caa794>] security_file_alloc+0x32/0x160 security/security.c:1440 [<00000000c6745ea3>] __alloc_file+0xba/0x310 fs/file_table.c:106 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If io_sqe_file_register() failed, we need put the file that get by fget() to avoid the memleak. Fixes: c3a31e605620 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09 18:11:41 +08:00
}
}
nr_args--;
done++;
up->offset++;
}
if (needs_switch) {
percpu_ref_kill(&data->node->refs);
spin_lock_bh(&data->lock);
list_add_tail(&ref_node->node, &data->ref_list);
data->node = ref_node;
spin_unlock_bh(&data->lock);
percpu_ref_get(&ctx->file_data->refs);
} else
destroy_fixed_file_ref_node(ref_node);
return done ? done : err;
}
static int io_sqe_files_update(struct io_ring_ctx *ctx, void __user *arg,
unsigned nr_args)
{
struct io_uring_files_update up;
if (!ctx->file_data)
return -ENXIO;
if (!nr_args)
return -EINVAL;
if (copy_from_user(&up, arg, sizeof(up)))
return -EFAULT;
if (up.resv)
return -EINVAL;
return __io_sqe_files_update(ctx, &up, nr_args);
}
static void io_free_work(struct io_wq_work *work)
{
struct io_kiocb *req = container_of(work, struct io_kiocb, work);
/* Consider that io_steal_work() relies on this ref */
io_put_req(req);
}
static int io_init_wq_offload(struct io_ring_ctx *ctx,
struct io_uring_params *p)
{
struct io_wq_data data;
struct fd f;
struct io_ring_ctx *ctx_attach;
unsigned int concurrency;
int ret = 0;
data.user = ctx->user;
data.free_work = io_free_work;
data.do_work = io_wq_submit_work;
if (!(p->flags & IORING_SETUP_ATTACH_WQ)) {
/* Do QD, or 4 * CPUS, whatever is smallest */
concurrency = min(ctx->sq_entries, 4 * num_online_cpus());
ctx->io_wq = io_wq_create(concurrency, &data);
if (IS_ERR(ctx->io_wq)) {
ret = PTR_ERR(ctx->io_wq);
ctx->io_wq = NULL;
}
return ret;
}
f = fdget(p->wq_fd);
if (!f.file)
return -EBADF;
if (f.file->f_op != &io_uring_fops) {
ret = -EINVAL;
goto out_fput;
}
ctx_attach = f.file->private_data;
/* @io_wq is protected by holding the fd */
if (!io_wq_get(ctx_attach->io_wq, &data)) {
ret = -EINVAL;
goto out_fput;
}
ctx->io_wq = ctx_attach->io_wq;
out_fput:
fdput(f);
return ret;
}
static int io_uring_alloc_task_context(struct task_struct *task)
{
struct io_uring_task *tctx;
int ret;
tctx = kmalloc(sizeof(*tctx), GFP_KERNEL);
if (unlikely(!tctx))
return -ENOMEM;
ret = percpu_counter_init(&tctx->inflight, 0, GFP_KERNEL);
if (unlikely(ret)) {
kfree(tctx);
return ret;
}
xa_init(&tctx->xa);
init_waitqueue_head(&tctx->wait);
tctx->last = NULL;
atomic_set(&tctx->in_idle, 0);
tctx->sqpoll = false;
io_init_identity(&tctx->__identity);
tctx->identity = &tctx->__identity;
task->io_uring = tctx;
return 0;
}
void __io_uring_free(struct task_struct *tsk)
{
struct io_uring_task *tctx = tsk->io_uring;
WARN_ON_ONCE(!xa_empty(&tctx->xa));
WARN_ON_ONCE(refcount_read(&tctx->identity->count) != 1);
if (tctx->identity != &tctx->__identity)
kfree(tctx->identity);
percpu_counter_destroy(&tctx->inflight);
kfree(tctx);
tsk->io_uring = NULL;
}
static int io_sq_offload_create(struct io_ring_ctx *ctx,
struct io_uring_params *p)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
int ret;
if (ctx->flags & IORING_SETUP_SQPOLL) {
struct io_sq_data *sqd;
ret = -EPERM;
if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_NICE))
goto err;
sqd = io_get_sq_data(p);
if (IS_ERR(sqd)) {
ret = PTR_ERR(sqd);
goto err;
}
ctx->sq_data = sqd;
io_sq_thread_park(sqd);
mutex_lock(&sqd->ctx_lock);
list_add(&ctx->sqd_list, &sqd->ctx_new_list);
mutex_unlock(&sqd->ctx_lock);
io_sq_thread_unpark(sqd);
ctx->sq_thread_idle = msecs_to_jiffies(p->sq_thread_idle);
if (!ctx->sq_thread_idle)
ctx->sq_thread_idle = HZ;
if (sqd->thread)
goto done;
if (p->flags & IORING_SETUP_SQ_AFF) {
int cpu = p->sq_thread_cpu;
ret = -EINVAL;
if (cpu >= nr_cpu_ids)
goto err;
if (!cpu_online(cpu))
goto err;
sqd->thread = kthread_create_on_cpu(io_sq_thread, sqd,
cpu, "io_uring-sq");
} else {
sqd->thread = kthread_create(io_sq_thread, sqd,
"io_uring-sq");
}
if (IS_ERR(sqd->thread)) {
ret = PTR_ERR(sqd->thread);
sqd->thread = NULL;
goto err;
}
ret = io_uring_alloc_task_context(sqd->thread);
if (ret)
goto err;
} else if (p->flags & IORING_SETUP_SQ_AFF) {
/* Can't have SQ_AFF without SQPOLL */
ret = -EINVAL;
goto err;
}
done:
ret = io_init_wq_offload(ctx, p);
if (ret)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
goto err;
return 0;
err:
io_finish_async(ctx);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return ret;
}
static void io_sq_offload_start(struct io_ring_ctx *ctx)
{
struct io_sq_data *sqd = ctx->sq_data;
if ((ctx->flags & IORING_SETUP_SQPOLL) && sqd->thread)
wake_up_process(sqd->thread);
}
static inline void __io_unaccount_mem(struct user_struct *user,
unsigned long nr_pages)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
atomic_long_sub(nr_pages, &user->locked_vm);
}
static inline int __io_account_mem(struct user_struct *user,
unsigned long nr_pages)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
unsigned long page_limit, cur_pages, new_pages;
/* Don't allow more pages than we can safely lock */
page_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
do {
cur_pages = atomic_long_read(&user->locked_vm);
new_pages = cur_pages + nr_pages;
if (new_pages > page_limit)
return -ENOMEM;
} while (atomic_long_cmpxchg(&user->locked_vm, cur_pages,
new_pages) != cur_pages);
return 0;
}
static void io_unaccount_mem(struct io_ring_ctx *ctx, unsigned long nr_pages,
enum io_mem_account acct)
{
if (ctx->limit_mem)
__io_unaccount_mem(ctx->user, nr_pages);
if (ctx->mm_account) {
if (acct == ACCT_LOCKED) {
mmap_write_lock(ctx->mm_account);
ctx->mm_account->locked_vm -= nr_pages;
mmap_write_unlock(ctx->mm_account);
}else if (acct == ACCT_PINNED) {
atomic64_sub(nr_pages, &ctx->mm_account->pinned_vm);
}
}
}
static int io_account_mem(struct io_ring_ctx *ctx, unsigned long nr_pages,
enum io_mem_account acct)
{
int ret;
if (ctx->limit_mem) {
ret = __io_account_mem(ctx->user, nr_pages);
if (ret)
return ret;
}
if (ctx->mm_account) {
if (acct == ACCT_LOCKED) {
mmap_write_lock(ctx->mm_account);
ctx->mm_account->locked_vm += nr_pages;
mmap_write_unlock(ctx->mm_account);
} else if (acct == ACCT_PINNED) {
atomic64_add(nr_pages, &ctx->mm_account->pinned_vm);
}
}
return 0;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static void io_mem_free(void *ptr)
{
io_uring: free allocated io_memory once If io_allocate_scq_urings() fails to allocate an sq_* region, it will call io_mem_free() for any previously allocated regions, but leave dangling pointers to these regions in the ctx. Any regions which have not yet been allocated are left NULL. Note that when returning -EOVERFLOW, the previously allocated sq_ring is not freed, which appears to be an unintentional leak. When io_allocate_scq_urings() fails, io_uring_create() will call io_ring_ctx_wait_and_kill(), which calls io_mem_free() on all the sq_* regions, assuming the pointers are valid and not NULL. This can result in pages being freed multiple times, which has been observed to corrupt the page state, leading to subsequent fun. This can also result in virt_to_page() on NULL, resulting in the use of bogus page addresses, and yet more subsequent fun. The latter can be detected with CONFIG_DEBUG_VIRTUAL on arm64. Adding a cleanup path to io_allocate_scq_urings() complicates the logic, so let's leave it to io_ring_ctx_free() to consistently free these pointers, and simplify the io_allocate_scq_urings() error paths. Full splats from before this patch below. Note that the pointer logged by the DEBUG_VIRTUAL "non-linear address" warning has been hashed, and is actually NULL. [ 26.098129] page:ffff80000e949a00 count:0 mapcount:-128 mapping:0000000000000000 index:0x0 [ 26.102976] flags: 0x63fffc000000() [ 26.104373] raw: 000063fffc000000 ffff80000e86c188 ffff80000ea3df08 0000000000000000 [ 26.108917] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 [ 26.137235] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) [ 26.143960] ------------[ cut here ]------------ [ 26.146020] kernel BUG at include/linux/mm.h:547! [ 26.147586] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 26.149163] Modules linked in: [ 26.150287] Process syz-executor.21 (pid: 20204, stack limit = 0x000000000e9cefeb) [ 26.153307] CPU: 2 PID: 20204 Comm: syz-executor.21 Not tainted 5.1.0-rc7-00004-g7d30b2ea43d6 #18 [ 26.156566] Hardware name: linux,dummy-virt (DT) [ 26.158089] pstate: 40400005 (nZcv daif +PAN -UAO) [ 26.159869] pc : io_mem_free+0x9c/0xa8 [ 26.161436] lr : io_mem_free+0x9c/0xa8 [ 26.162720] sp : ffff000013003d60 [ 26.164048] x29: ffff000013003d60 x28: ffff800025048040 [ 26.165804] x27: 0000000000000000 x26: ffff800025048040 [ 26.167352] x25: 00000000000000c0 x24: ffff0000112c2820 [ 26.169682] x23: 0000000000000000 x22: 0000000020000080 [ 26.171899] x21: ffff80002143b418 x20: ffff80002143b400 [ 26.174236] x19: ffff80002143b280 x18: 0000000000000000 [ 26.176607] x17: 0000000000000000 x16: 0000000000000000 [ 26.178997] x15: 0000000000000000 x14: 0000000000000000 [ 26.181508] x13: 00009178a5e077b2 x12: 0000000000000001 [ 26.183863] x11: 0000000000000000 x10: 0000000000000980 [ 26.186437] x9 : ffff000013003a80 x8 : ffff800025048a20 [ 26.189006] x7 : ffff8000250481c0 x6 : ffff80002ffe9118 [ 26.191359] x5 : ffff80002ffe9118 x4 : 0000000000000000 [ 26.193863] x3 : ffff80002ffefe98 x2 : 44c06ddd107d1f00 [ 26.196642] x1 : 0000000000000000 x0 : 000000000000003e [ 26.198892] Call trace: [ 26.199893] io_mem_free+0x9c/0xa8 [ 26.201155] io_ring_ctx_wait_and_kill+0xec/0x180 [ 26.202688] io_uring_setup+0x6c4/0x6f0 [ 26.204091] __arm64_sys_io_uring_setup+0x18/0x20 [ 26.205576] el0_svc_common.constprop.0+0x7c/0xe8 [ 26.207186] el0_svc_handler+0x28/0x78 [ 26.208389] el0_svc+0x8/0xc [ 26.209408] Code: aa0203e0 d0006861 9133a021 97fcdc3c (d4210000) [ 26.211995] ---[ end trace bdb81cd43a21e50d ]--- [ 81.770626] ------------[ cut here ]------------ [ 81.825015] virt_to_phys used for non-linear address: 000000000d42f2c7 ( (null)) [ 81.827860] WARNING: CPU: 1 PID: 30171 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x48/0x68 [ 81.831202] Modules linked in: [ 81.832212] CPU: 1 PID: 30171 Comm: syz-executor.20 Not tainted 5.1.0-rc7-00004-g7d30b2ea43d6 #19 [ 81.835616] Hardware name: linux,dummy-virt (DT) [ 81.836863] pstate: 60400005 (nZCv daif +PAN -UAO) [ 81.838727] pc : __virt_to_phys+0x48/0x68 [ 81.840572] lr : __virt_to_phys+0x48/0x68 [ 81.842264] sp : ffff80002cf67c70 [ 81.843858] x29: ffff80002cf67c70 x28: ffff800014358e18 [ 81.846463] x27: 0000000000000000 x26: 0000000020000080 [ 81.849148] x25: 0000000000000000 x24: ffff80001bb01f40 [ 81.851986] x23: ffff200011db06c8 x22: ffff2000127e3c60 [ 81.854351] x21: ffff800014358cc0 x20: ffff800014358d98 [ 81.856711] x19: 0000000000000000 x18: 0000000000000000 [ 81.859132] x17: 0000000000000000 x16: 0000000000000000 [ 81.861586] x15: 0000000000000000 x14: 0000000000000000 [ 81.863905] x13: 0000000000000000 x12: ffff1000037603e9 [ 81.866226] x11: 1ffff000037603e8 x10: 0000000000000980 [ 81.868776] x9 : ffff80002cf67840 x8 : ffff80001bb02920 [ 81.873272] x7 : ffff1000037603e9 x6 : ffff80001bb01f47 [ 81.875266] x5 : ffff1000037603e9 x4 : dfff200000000000 [ 81.876875] x3 : ffff200010087528 x2 : ffff1000059ecf58 [ 81.878751] x1 : 44c06ddd107d1f00 x0 : 0000000000000000 [ 81.880453] Call trace: [ 81.881164] __virt_to_phys+0x48/0x68 [ 81.882919] io_mem_free+0x18/0x110 [ 81.886585] io_ring_ctx_wait_and_kill+0x13c/0x1f0 [ 81.891212] io_uring_setup+0xa60/0xad0 [ 81.892881] __arm64_sys_io_uring_setup+0x2c/0x38 [ 81.894398] el0_svc_common.constprop.0+0xac/0x150 [ 81.896306] el0_svc_handler+0x34/0x88 [ 81.897744] el0_svc+0x8/0xc [ 81.898715] ---[ end trace b4a703802243cbba ]--- Fixes: 2b188cc1bb857a9d ("Add io_uring IO interface") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01 00:30:21 +08:00
struct page *page;
if (!ptr)
return;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
io_uring: free allocated io_memory once If io_allocate_scq_urings() fails to allocate an sq_* region, it will call io_mem_free() for any previously allocated regions, but leave dangling pointers to these regions in the ctx. Any regions which have not yet been allocated are left NULL. Note that when returning -EOVERFLOW, the previously allocated sq_ring is not freed, which appears to be an unintentional leak. When io_allocate_scq_urings() fails, io_uring_create() will call io_ring_ctx_wait_and_kill(), which calls io_mem_free() on all the sq_* regions, assuming the pointers are valid and not NULL. This can result in pages being freed multiple times, which has been observed to corrupt the page state, leading to subsequent fun. This can also result in virt_to_page() on NULL, resulting in the use of bogus page addresses, and yet more subsequent fun. The latter can be detected with CONFIG_DEBUG_VIRTUAL on arm64. Adding a cleanup path to io_allocate_scq_urings() complicates the logic, so let's leave it to io_ring_ctx_free() to consistently free these pointers, and simplify the io_allocate_scq_urings() error paths. Full splats from before this patch below. Note that the pointer logged by the DEBUG_VIRTUAL "non-linear address" warning has been hashed, and is actually NULL. [ 26.098129] page:ffff80000e949a00 count:0 mapcount:-128 mapping:0000000000000000 index:0x0 [ 26.102976] flags: 0x63fffc000000() [ 26.104373] raw: 000063fffc000000 ffff80000e86c188 ffff80000ea3df08 0000000000000000 [ 26.108917] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 [ 26.137235] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) [ 26.143960] ------------[ cut here ]------------ [ 26.146020] kernel BUG at include/linux/mm.h:547! [ 26.147586] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 26.149163] Modules linked in: [ 26.150287] Process syz-executor.21 (pid: 20204, stack limit = 0x000000000e9cefeb) [ 26.153307] CPU: 2 PID: 20204 Comm: syz-executor.21 Not tainted 5.1.0-rc7-00004-g7d30b2ea43d6 #18 [ 26.156566] Hardware name: linux,dummy-virt (DT) [ 26.158089] pstate: 40400005 (nZcv daif +PAN -UAO) [ 26.159869] pc : io_mem_free+0x9c/0xa8 [ 26.161436] lr : io_mem_free+0x9c/0xa8 [ 26.162720] sp : ffff000013003d60 [ 26.164048] x29: ffff000013003d60 x28: ffff800025048040 [ 26.165804] x27: 0000000000000000 x26: ffff800025048040 [ 26.167352] x25: 00000000000000c0 x24: ffff0000112c2820 [ 26.169682] x23: 0000000000000000 x22: 0000000020000080 [ 26.171899] x21: ffff80002143b418 x20: ffff80002143b400 [ 26.174236] x19: ffff80002143b280 x18: 0000000000000000 [ 26.176607] x17: 0000000000000000 x16: 0000000000000000 [ 26.178997] x15: 0000000000000000 x14: 0000000000000000 [ 26.181508] x13: 00009178a5e077b2 x12: 0000000000000001 [ 26.183863] x11: 0000000000000000 x10: 0000000000000980 [ 26.186437] x9 : ffff000013003a80 x8 : ffff800025048a20 [ 26.189006] x7 : ffff8000250481c0 x6 : ffff80002ffe9118 [ 26.191359] x5 : ffff80002ffe9118 x4 : 0000000000000000 [ 26.193863] x3 : ffff80002ffefe98 x2 : 44c06ddd107d1f00 [ 26.196642] x1 : 0000000000000000 x0 : 000000000000003e [ 26.198892] Call trace: [ 26.199893] io_mem_free+0x9c/0xa8 [ 26.201155] io_ring_ctx_wait_and_kill+0xec/0x180 [ 26.202688] io_uring_setup+0x6c4/0x6f0 [ 26.204091] __arm64_sys_io_uring_setup+0x18/0x20 [ 26.205576] el0_svc_common.constprop.0+0x7c/0xe8 [ 26.207186] el0_svc_handler+0x28/0x78 [ 26.208389] el0_svc+0x8/0xc [ 26.209408] Code: aa0203e0 d0006861 9133a021 97fcdc3c (d4210000) [ 26.211995] ---[ end trace bdb81cd43a21e50d ]--- [ 81.770626] ------------[ cut here ]------------ [ 81.825015] virt_to_phys used for non-linear address: 000000000d42f2c7 ( (null)) [ 81.827860] WARNING: CPU: 1 PID: 30171 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x48/0x68 [ 81.831202] Modules linked in: [ 81.832212] CPU: 1 PID: 30171 Comm: syz-executor.20 Not tainted 5.1.0-rc7-00004-g7d30b2ea43d6 #19 [ 81.835616] Hardware name: linux,dummy-virt (DT) [ 81.836863] pstate: 60400005 (nZCv daif +PAN -UAO) [ 81.838727] pc : __virt_to_phys+0x48/0x68 [ 81.840572] lr : __virt_to_phys+0x48/0x68 [ 81.842264] sp : ffff80002cf67c70 [ 81.843858] x29: ffff80002cf67c70 x28: ffff800014358e18 [ 81.846463] x27: 0000000000000000 x26: 0000000020000080 [ 81.849148] x25: 0000000000000000 x24: ffff80001bb01f40 [ 81.851986] x23: ffff200011db06c8 x22: ffff2000127e3c60 [ 81.854351] x21: ffff800014358cc0 x20: ffff800014358d98 [ 81.856711] x19: 0000000000000000 x18: 0000000000000000 [ 81.859132] x17: 0000000000000000 x16: 0000000000000000 [ 81.861586] x15: 0000000000000000 x14: 0000000000000000 [ 81.863905] x13: 0000000000000000 x12: ffff1000037603e9 [ 81.866226] x11: 1ffff000037603e8 x10: 0000000000000980 [ 81.868776] x9 : ffff80002cf67840 x8 : ffff80001bb02920 [ 81.873272] x7 : ffff1000037603e9 x6 : ffff80001bb01f47 [ 81.875266] x5 : ffff1000037603e9 x4 : dfff200000000000 [ 81.876875] x3 : ffff200010087528 x2 : ffff1000059ecf58 [ 81.878751] x1 : 44c06ddd107d1f00 x0 : 0000000000000000 [ 81.880453] Call trace: [ 81.881164] __virt_to_phys+0x48/0x68 [ 81.882919] io_mem_free+0x18/0x110 [ 81.886585] io_ring_ctx_wait_and_kill+0x13c/0x1f0 [ 81.891212] io_uring_setup+0xa60/0xad0 [ 81.892881] __arm64_sys_io_uring_setup+0x2c/0x38 [ 81.894398] el0_svc_common.constprop.0+0xac/0x150 [ 81.896306] el0_svc_handler+0x34/0x88 [ 81.897744] el0_svc+0x8/0xc [ 81.898715] ---[ end trace b4a703802243cbba ]--- Fixes: 2b188cc1bb857a9d ("Add io_uring IO interface") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01 00:30:21 +08:00
page = virt_to_head_page(ptr);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
if (put_page_testzero(page))
free_compound_page(page);
}
static void *io_mem_alloc(size_t size)
{
gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN | __GFP_COMP |
__GFP_NORETRY;
return (void *) __get_free_pages(gfp_flags, get_order(size));
}
static unsigned long rings_size(unsigned sq_entries, unsigned cq_entries,
size_t *sq_offset)
{
struct io_rings *rings;
size_t off, sq_array_size;
off = struct_size(rings, cqes, cq_entries);
if (off == SIZE_MAX)
return SIZE_MAX;
#ifdef CONFIG_SMP
off = ALIGN(off, SMP_CACHE_BYTES);
if (off == 0)
return SIZE_MAX;
#endif
if (sq_offset)
*sq_offset = off;
sq_array_size = array_size(sizeof(u32), sq_entries);
if (sq_array_size == SIZE_MAX)
return SIZE_MAX;
if (check_add_overflow(off, sq_array_size, &off))
return SIZE_MAX;
return off;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static unsigned long ring_pages(unsigned sq_entries, unsigned cq_entries)
{
size_t pages;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
pages = (size_t)1 << get_order(
rings_size(sq_entries, cq_entries, NULL));
pages += (size_t)1 << get_order(
array_size(sizeof(struct io_uring_sqe), sq_entries));
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return pages;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
static int io_sqe_buffer_unregister(struct io_ring_ctx *ctx)
{
int i, j;
if (!ctx->user_bufs)
return -ENXIO;
for (i = 0; i < ctx->nr_user_bufs; i++) {
struct io_mapped_ubuf *imu = &ctx->user_bufs[i];
for (j = 0; j < imu->nr_bvecs; j++)
unpin_user_page(imu->bvec[j].bv_page);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
if (imu->acct_pages)
io_unaccount_mem(ctx, imu->acct_pages, ACCT_PINNED);
io_uring: avoid page allocation warnings In io_sqe_buffer_register() we allocate a number of arrays based on the iov_len from the user-provided iov. While we limit iov_len to SZ_1G, we can still attempt to allocate arrays exceeding MAX_ORDER. On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320 bytes, which is greater than 4MiB. This results in SLUB warning that we're trying to allocate greater than MAX_ORDER, and failing the allocation. Avoid this by using kvmalloc() for allocations dependent on the user-provided iov_len. At the same time, fix a leak of imu->bvec when registration fails. Full splat from before this patch: WARNING: CPU: 1 PID: 2314 at mm/page_alloc.c:4595 __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2314 Comm: syz-executor326 Not tainted 5.1.0-rc7-dirty #4 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x190 lib/dump_stack.c:113 panic+0x384/0x68c kernel/panic.c:214 __warn+0x2bc/0x2c0 kernel/panic.c:571 report_bug+0x228/0x2d8 lib/bug.c:186 bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956 call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline] brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316 do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831 el1_dbg+0x18/0x8c __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 alloc_pages_current+0x164/0x278 mm/mempolicy.c:2132 alloc_pages include/linux/gfp.h:509 [inline] kmalloc_order+0x20/0x50 mm/slab_common.c:1231 kmalloc_order_trace+0x30/0x2b0 mm/slab_common.c:1243 kmalloc_large include/linux/slab.h:480 [inline] __kmalloc+0x3dc/0x4f0 mm/slub.c:3791 kmalloc_array include/linux/slab.h:670 [inline] io_sqe_buffer_register fs/io_uring.c:2472 [inline] __io_uring_register fs/io_uring.c:2962 [inline] __do_sys_io_uring_register fs/io_uring.c:3008 [inline] __se_sys_io_uring_register fs/io_uring.c:2990 [inline] __arm64_sys_io_uring_register+0x9e0/0x1bc8 fs/io_uring.c:2990 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948 SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled CPU features: 0x002,23000438 Memory Limit: none Rebooting in 1 seconds.. Fixes: edafccee56ff3167 ("io_uring: add support for pre-mapped user IO buffers") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01 23:59:16 +08:00
kvfree(imu->bvec);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
imu->nr_bvecs = 0;
}
kfree(ctx->user_bufs);
ctx->user_bufs = NULL;
ctx->nr_user_bufs = 0;
return 0;
}
static int io_copy_iov(struct io_ring_ctx *ctx, struct iovec *dst,
void __user *arg, unsigned index)
{
struct iovec __user *src;
#ifdef CONFIG_COMPAT
if (ctx->compat) {
struct compat_iovec __user *ciovs;
struct compat_iovec ciov;
ciovs = (struct compat_iovec __user *) arg;
if (copy_from_user(&ciov, &ciovs[index], sizeof(ciov)))
return -EFAULT;
dst->iov_base = u64_to_user_ptr((u64)ciov.iov_base);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
dst->iov_len = ciov.iov_len;
return 0;
}
#endif
src = (struct iovec __user *) arg;
if (copy_from_user(dst, &src[index], sizeof(*dst)))
return -EFAULT;
return 0;
}
/*
* Not super efficient, but this is just a registration time. And we do cache
* the last compound head, so generally we'll only do a full search if we don't
* match that one.
*
* We check if the given compound head page has already been accounted, to
* avoid double accounting it. This allows us to account the full size of the
* page, not just the constituent pages of a huge page.
*/
static bool headpage_already_acct(struct io_ring_ctx *ctx, struct page **pages,
int nr_pages, struct page *hpage)
{
int i, j;
/* check current page array */
for (i = 0; i < nr_pages; i++) {
if (!PageCompound(pages[i]))
continue;
if (compound_head(pages[i]) == hpage)
return true;
}
/* check previously registered pages */
for (i = 0; i < ctx->nr_user_bufs; i++) {
struct io_mapped_ubuf *imu = &ctx->user_bufs[i];
for (j = 0; j < imu->nr_bvecs; j++) {
if (!PageCompound(imu->bvec[j].bv_page))
continue;
if (compound_head(imu->bvec[j].bv_page) == hpage)
return true;
}
}
return false;
}
static int io_buffer_account_pin(struct io_ring_ctx *ctx, struct page **pages,
int nr_pages, struct io_mapped_ubuf *imu,
struct page **last_hpage)
{
int i, ret;
for (i = 0; i < nr_pages; i++) {
if (!PageCompound(pages[i])) {
imu->acct_pages++;
} else {
struct page *hpage;
hpage = compound_head(pages[i]);
if (hpage == *last_hpage)
continue;
*last_hpage = hpage;
if (headpage_already_acct(ctx, pages, i, hpage))
continue;
imu->acct_pages += page_size(hpage) >> PAGE_SHIFT;
}
}
if (!imu->acct_pages)
return 0;
ret = io_account_mem(ctx, imu->acct_pages, ACCT_PINNED);
if (ret)
imu->acct_pages = 0;
return ret;
}
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
static int io_sqe_buffer_register(struct io_ring_ctx *ctx, void __user *arg,
unsigned nr_args)
{
struct vm_area_struct **vmas = NULL;
struct page **pages = NULL;
struct page *last_hpage = NULL;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
int i, j, got_pages = 0;
int ret = -EINVAL;
if (ctx->user_bufs)
return -EBUSY;
if (!nr_args || nr_args > UIO_MAXIOV)
return -EINVAL;
ctx->user_bufs = kcalloc(nr_args, sizeof(struct io_mapped_ubuf),
GFP_KERNEL);
if (!ctx->user_bufs)
return -ENOMEM;
for (i = 0; i < nr_args; i++) {
struct io_mapped_ubuf *imu = &ctx->user_bufs[i];
unsigned long off, start, end, ubuf;
int pret, nr_pages;
struct iovec iov;
size_t size;
ret = io_copy_iov(ctx, &iov, arg, i);
if (ret)
goto err;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
/*
* Don't impose further limits on the size and buffer
* constraints here, we'll -EINVAL later when IO is
* submitted if they are wrong.
*/
ret = -EFAULT;
if (!iov.iov_base || !iov.iov_len)
goto err;
/* arbitrary limit, but we need something */
if (iov.iov_len > SZ_1G)
goto err;
ubuf = (unsigned long) iov.iov_base;
end = (ubuf + iov.iov_len + PAGE_SIZE - 1) >> PAGE_SHIFT;
start = ubuf >> PAGE_SHIFT;
nr_pages = end - start;
ret = 0;
if (!pages || nr_pages > got_pages) {
kvfree(vmas);
kvfree(pages);
io_uring: avoid page allocation warnings In io_sqe_buffer_register() we allocate a number of arrays based on the iov_len from the user-provided iov. While we limit iov_len to SZ_1G, we can still attempt to allocate arrays exceeding MAX_ORDER. On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320 bytes, which is greater than 4MiB. This results in SLUB warning that we're trying to allocate greater than MAX_ORDER, and failing the allocation. Avoid this by using kvmalloc() for allocations dependent on the user-provided iov_len. At the same time, fix a leak of imu->bvec when registration fails. Full splat from before this patch: WARNING: CPU: 1 PID: 2314 at mm/page_alloc.c:4595 __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2314 Comm: syz-executor326 Not tainted 5.1.0-rc7-dirty #4 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x190 lib/dump_stack.c:113 panic+0x384/0x68c kernel/panic.c:214 __warn+0x2bc/0x2c0 kernel/panic.c:571 report_bug+0x228/0x2d8 lib/bug.c:186 bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956 call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline] brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316 do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831 el1_dbg+0x18/0x8c __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 alloc_pages_current+0x164/0x278 mm/mempolicy.c:2132 alloc_pages include/linux/gfp.h:509 [inline] kmalloc_order+0x20/0x50 mm/slab_common.c:1231 kmalloc_order_trace+0x30/0x2b0 mm/slab_common.c:1243 kmalloc_large include/linux/slab.h:480 [inline] __kmalloc+0x3dc/0x4f0 mm/slub.c:3791 kmalloc_array include/linux/slab.h:670 [inline] io_sqe_buffer_register fs/io_uring.c:2472 [inline] __io_uring_register fs/io_uring.c:2962 [inline] __do_sys_io_uring_register fs/io_uring.c:3008 [inline] __se_sys_io_uring_register fs/io_uring.c:2990 [inline] __arm64_sys_io_uring_register+0x9e0/0x1bc8 fs/io_uring.c:2990 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948 SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled CPU features: 0x002,23000438 Memory Limit: none Rebooting in 1 seconds.. Fixes: edafccee56ff3167 ("io_uring: add support for pre-mapped user IO buffers") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01 23:59:16 +08:00
pages = kvmalloc_array(nr_pages, sizeof(struct page *),
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
GFP_KERNEL);
io_uring: avoid page allocation warnings In io_sqe_buffer_register() we allocate a number of arrays based on the iov_len from the user-provided iov. While we limit iov_len to SZ_1G, we can still attempt to allocate arrays exceeding MAX_ORDER. On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320 bytes, which is greater than 4MiB. This results in SLUB warning that we're trying to allocate greater than MAX_ORDER, and failing the allocation. Avoid this by using kvmalloc() for allocations dependent on the user-provided iov_len. At the same time, fix a leak of imu->bvec when registration fails. Full splat from before this patch: WARNING: CPU: 1 PID: 2314 at mm/page_alloc.c:4595 __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2314 Comm: syz-executor326 Not tainted 5.1.0-rc7-dirty #4 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x190 lib/dump_stack.c:113 panic+0x384/0x68c kernel/panic.c:214 __warn+0x2bc/0x2c0 kernel/panic.c:571 report_bug+0x228/0x2d8 lib/bug.c:186 bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956 call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline] brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316 do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831 el1_dbg+0x18/0x8c __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 alloc_pages_current+0x164/0x278 mm/mempolicy.c:2132 alloc_pages include/linux/gfp.h:509 [inline] kmalloc_order+0x20/0x50 mm/slab_common.c:1231 kmalloc_order_trace+0x30/0x2b0 mm/slab_common.c:1243 kmalloc_large include/linux/slab.h:480 [inline] __kmalloc+0x3dc/0x4f0 mm/slub.c:3791 kmalloc_array include/linux/slab.h:670 [inline] io_sqe_buffer_register fs/io_uring.c:2472 [inline] __io_uring_register fs/io_uring.c:2962 [inline] __do_sys_io_uring_register fs/io_uring.c:3008 [inline] __se_sys_io_uring_register fs/io_uring.c:2990 [inline] __arm64_sys_io_uring_register+0x9e0/0x1bc8 fs/io_uring.c:2990 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948 SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled CPU features: 0x002,23000438 Memory Limit: none Rebooting in 1 seconds.. Fixes: edafccee56ff3167 ("io_uring: add support for pre-mapped user IO buffers") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01 23:59:16 +08:00
vmas = kvmalloc_array(nr_pages,
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
sizeof(struct vm_area_struct *),
GFP_KERNEL);
if (!pages || !vmas) {
ret = -ENOMEM;
goto err;
}
got_pages = nr_pages;
}
io_uring: avoid page allocation warnings In io_sqe_buffer_register() we allocate a number of arrays based on the iov_len from the user-provided iov. While we limit iov_len to SZ_1G, we can still attempt to allocate arrays exceeding MAX_ORDER. On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320 bytes, which is greater than 4MiB. This results in SLUB warning that we're trying to allocate greater than MAX_ORDER, and failing the allocation. Avoid this by using kvmalloc() for allocations dependent on the user-provided iov_len. At the same time, fix a leak of imu->bvec when registration fails. Full splat from before this patch: WARNING: CPU: 1 PID: 2314 at mm/page_alloc.c:4595 __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2314 Comm: syz-executor326 Not tainted 5.1.0-rc7-dirty #4 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x190 lib/dump_stack.c:113 panic+0x384/0x68c kernel/panic.c:214 __warn+0x2bc/0x2c0 kernel/panic.c:571 report_bug+0x228/0x2d8 lib/bug.c:186 bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956 call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline] brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316 do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831 el1_dbg+0x18/0x8c __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 alloc_pages_current+0x164/0x278 mm/mempolicy.c:2132 alloc_pages include/linux/gfp.h:509 [inline] kmalloc_order+0x20/0x50 mm/slab_common.c:1231 kmalloc_order_trace+0x30/0x2b0 mm/slab_common.c:1243 kmalloc_large include/linux/slab.h:480 [inline] __kmalloc+0x3dc/0x4f0 mm/slub.c:3791 kmalloc_array include/linux/slab.h:670 [inline] io_sqe_buffer_register fs/io_uring.c:2472 [inline] __io_uring_register fs/io_uring.c:2962 [inline] __do_sys_io_uring_register fs/io_uring.c:3008 [inline] __se_sys_io_uring_register fs/io_uring.c:2990 [inline] __arm64_sys_io_uring_register+0x9e0/0x1bc8 fs/io_uring.c:2990 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948 SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled CPU features: 0x002,23000438 Memory Limit: none Rebooting in 1 seconds.. Fixes: edafccee56ff3167 ("io_uring: add support for pre-mapped user IO buffers") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01 23:59:16 +08:00
imu->bvec = kvmalloc_array(nr_pages, sizeof(struct bio_vec),
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
GFP_KERNEL);
ret = -ENOMEM;
if (!imu->bvec)
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
goto err;
ret = 0;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:25 +08:00
mmap_read_lock(current->mm);
fs/io_uring: set FOLL_PIN via pin_user_pages() Convert fs/io_uring to use the new pin_user_pages() call, which sets FOLL_PIN. Setting FOLL_PIN is now required for code that requires tracking of pinned pages, and therefore for any code that calls put_user_page(). In partial anticipation of this work, the io_uring code was already calling put_user_page() instead of put_page(). Therefore, in order to convert from the get_user_pages()/put_page() model, to the pin_user_pages()/put_user_page() model, the only change required here is to change get_user_pages() to pin_user_pages(). Link: http://lkml.kernel.org/r/20200107224558.2362728-17-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:13:13 +08:00
pret = pin_user_pages(ubuf, nr_pages,
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
FOLL_WRITE | FOLL_LONGTERM,
pages, vmas);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
if (pret == nr_pages) {
/* don't support file backed memory */
for (j = 0; j < nr_pages; j++) {
struct vm_area_struct *vma = vmas[j];
if (vma->vm_file &&
!is_file_hugepages(vma->vm_file)) {
ret = -EOPNOTSUPP;
break;
}
}
} else {
ret = pret < 0 ? pret : -EFAULT;
}
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:25 +08:00
mmap_read_unlock(current->mm);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
if (ret) {
/*
* if we did partial map, or found file backed vmas,
* release any pages we did get
*/
if (pret > 0)
unpin_user_pages(pages, pret);
kvfree(imu->bvec);
goto err;
}
ret = io_buffer_account_pin(ctx, pages, pret, imu, &last_hpage);
if (ret) {
unpin_user_pages(pages, pret);
io_uring: avoid page allocation warnings In io_sqe_buffer_register() we allocate a number of arrays based on the iov_len from the user-provided iov. While we limit iov_len to SZ_1G, we can still attempt to allocate arrays exceeding MAX_ORDER. On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320 bytes, which is greater than 4MiB. This results in SLUB warning that we're trying to allocate greater than MAX_ORDER, and failing the allocation. Avoid this by using kvmalloc() for allocations dependent on the user-provided iov_len. At the same time, fix a leak of imu->bvec when registration fails. Full splat from before this patch: WARNING: CPU: 1 PID: 2314 at mm/page_alloc.c:4595 __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2314 Comm: syz-executor326 Not tainted 5.1.0-rc7-dirty #4 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x190 lib/dump_stack.c:113 panic+0x384/0x68c kernel/panic.c:214 __warn+0x2bc/0x2c0 kernel/panic.c:571 report_bug+0x228/0x2d8 lib/bug.c:186 bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956 call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline] brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316 do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831 el1_dbg+0x18/0x8c __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 alloc_pages_current+0x164/0x278 mm/mempolicy.c:2132 alloc_pages include/linux/gfp.h:509 [inline] kmalloc_order+0x20/0x50 mm/slab_common.c:1231 kmalloc_order_trace+0x30/0x2b0 mm/slab_common.c:1243 kmalloc_large include/linux/slab.h:480 [inline] __kmalloc+0x3dc/0x4f0 mm/slub.c:3791 kmalloc_array include/linux/slab.h:670 [inline] io_sqe_buffer_register fs/io_uring.c:2472 [inline] __io_uring_register fs/io_uring.c:2962 [inline] __do_sys_io_uring_register fs/io_uring.c:3008 [inline] __se_sys_io_uring_register fs/io_uring.c:2990 [inline] __arm64_sys_io_uring_register+0x9e0/0x1bc8 fs/io_uring.c:2990 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948 SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled CPU features: 0x002,23000438 Memory Limit: none Rebooting in 1 seconds.. Fixes: edafccee56ff3167 ("io_uring: add support for pre-mapped user IO buffers") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01 23:59:16 +08:00
kvfree(imu->bvec);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
goto err;
}
off = ubuf & ~PAGE_MASK;
size = iov.iov_len;
for (j = 0; j < nr_pages; j++) {
size_t vec_len;
vec_len = min_t(size_t, size, PAGE_SIZE - off);
imu->bvec[j].bv_page = pages[j];
imu->bvec[j].bv_len = vec_len;
imu->bvec[j].bv_offset = off;
off = 0;
size -= vec_len;
}
/* store original address for later verification */
imu->ubuf = ubuf;
imu->len = iov.iov_len;
imu->nr_bvecs = nr_pages;
ctx->nr_user_bufs++;
}
io_uring: avoid page allocation warnings In io_sqe_buffer_register() we allocate a number of arrays based on the iov_len from the user-provided iov. While we limit iov_len to SZ_1G, we can still attempt to allocate arrays exceeding MAX_ORDER. On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320 bytes, which is greater than 4MiB. This results in SLUB warning that we're trying to allocate greater than MAX_ORDER, and failing the allocation. Avoid this by using kvmalloc() for allocations dependent on the user-provided iov_len. At the same time, fix a leak of imu->bvec when registration fails. Full splat from before this patch: WARNING: CPU: 1 PID: 2314 at mm/page_alloc.c:4595 __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2314 Comm: syz-executor326 Not tainted 5.1.0-rc7-dirty #4 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x190 lib/dump_stack.c:113 panic+0x384/0x68c kernel/panic.c:214 __warn+0x2bc/0x2c0 kernel/panic.c:571 report_bug+0x228/0x2d8 lib/bug.c:186 bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956 call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline] brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316 do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831 el1_dbg+0x18/0x8c __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 alloc_pages_current+0x164/0x278 mm/mempolicy.c:2132 alloc_pages include/linux/gfp.h:509 [inline] kmalloc_order+0x20/0x50 mm/slab_common.c:1231 kmalloc_order_trace+0x30/0x2b0 mm/slab_common.c:1243 kmalloc_large include/linux/slab.h:480 [inline] __kmalloc+0x3dc/0x4f0 mm/slub.c:3791 kmalloc_array include/linux/slab.h:670 [inline] io_sqe_buffer_register fs/io_uring.c:2472 [inline] __io_uring_register fs/io_uring.c:2962 [inline] __do_sys_io_uring_register fs/io_uring.c:3008 [inline] __se_sys_io_uring_register fs/io_uring.c:2990 [inline] __arm64_sys_io_uring_register+0x9e0/0x1bc8 fs/io_uring.c:2990 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948 SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled CPU features: 0x002,23000438 Memory Limit: none Rebooting in 1 seconds.. Fixes: edafccee56ff3167 ("io_uring: add support for pre-mapped user IO buffers") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01 23:59:16 +08:00
kvfree(pages);
kvfree(vmas);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
return 0;
err:
io_uring: avoid page allocation warnings In io_sqe_buffer_register() we allocate a number of arrays based on the iov_len from the user-provided iov. While we limit iov_len to SZ_1G, we can still attempt to allocate arrays exceeding MAX_ORDER. On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320 bytes, which is greater than 4MiB. This results in SLUB warning that we're trying to allocate greater than MAX_ORDER, and failing the allocation. Avoid this by using kvmalloc() for allocations dependent on the user-provided iov_len. At the same time, fix a leak of imu->bvec when registration fails. Full splat from before this patch: WARNING: CPU: 1 PID: 2314 at mm/page_alloc.c:4595 __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2314 Comm: syz-executor326 Not tainted 5.1.0-rc7-dirty #4 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x190 lib/dump_stack.c:113 panic+0x384/0x68c kernel/panic.c:214 __warn+0x2bc/0x2c0 kernel/panic.c:571 report_bug+0x228/0x2d8 lib/bug.c:186 bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956 call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline] brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316 do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831 el1_dbg+0x18/0x8c __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 alloc_pages_current+0x164/0x278 mm/mempolicy.c:2132 alloc_pages include/linux/gfp.h:509 [inline] kmalloc_order+0x20/0x50 mm/slab_common.c:1231 kmalloc_order_trace+0x30/0x2b0 mm/slab_common.c:1243 kmalloc_large include/linux/slab.h:480 [inline] __kmalloc+0x3dc/0x4f0 mm/slub.c:3791 kmalloc_array include/linux/slab.h:670 [inline] io_sqe_buffer_register fs/io_uring.c:2472 [inline] __io_uring_register fs/io_uring.c:2962 [inline] __do_sys_io_uring_register fs/io_uring.c:3008 [inline] __se_sys_io_uring_register fs/io_uring.c:2990 [inline] __arm64_sys_io_uring_register+0x9e0/0x1bc8 fs/io_uring.c:2990 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948 SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled CPU features: 0x002,23000438 Memory Limit: none Rebooting in 1 seconds.. Fixes: edafccee56ff3167 ("io_uring: add support for pre-mapped user IO buffers") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01 23:59:16 +08:00
kvfree(pages);
kvfree(vmas);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
io_sqe_buffer_unregister(ctx);
return ret;
}
static int io_eventfd_register(struct io_ring_ctx *ctx, void __user *arg)
{
__s32 __user *fds = arg;
int fd;
if (ctx->cq_ev_fd)
return -EBUSY;
if (copy_from_user(&fd, fds, sizeof(*fds)))
return -EFAULT;
ctx->cq_ev_fd = eventfd_ctx_fdget(fd);
if (IS_ERR(ctx->cq_ev_fd)) {
int ret = PTR_ERR(ctx->cq_ev_fd);
ctx->cq_ev_fd = NULL;
return ret;
}
return 0;
}
static int io_eventfd_unregister(struct io_ring_ctx *ctx)
{
if (ctx->cq_ev_fd) {
eventfd_ctx_put(ctx->cq_ev_fd);
ctx->cq_ev_fd = NULL;
return 0;
}
return -ENXIO;
}
static int __io_destroy_buffers(int id, void *p, void *data)
{
struct io_ring_ctx *ctx = data;
struct io_buffer *buf = p;
__io_remove_buffers(ctx, buf, id, -1U);
return 0;
}
static void io_destroy_buffers(struct io_ring_ctx *ctx)
{
idr_for_each(&ctx->io_buffer_idr, __io_destroy_buffers, ctx);
idr_destroy(&ctx->io_buffer_idr);
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static void io_ring_ctx_free(struct io_ring_ctx *ctx)
{
io_finish_async(ctx);
io_sqe_buffer_unregister(ctx);
if (ctx->sqo_task) {
put_task_struct(ctx->sqo_task);
ctx->sqo_task = NULL;
mmdrop(ctx->mm_account);
ctx->mm_account = NULL;
}
#ifdef CONFIG_BLK_CGROUP
if (ctx->sqo_blkcg_css)
css_put(ctx->sqo_blkcg_css);
#endif
io_sqe_files_unregister(ctx);
io_eventfd_unregister(ctx);
io_destroy_buffers(ctx);
idr_destroy(&ctx->personality_idr);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#if defined(CONFIG_UNIX)
if (ctx->ring_sock) {
ctx->ring_sock->file = NULL; /* so that iput() is called */
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
sock_release(ctx->ring_sock);
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#endif
io_mem_free(ctx->rings);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
io_mem_free(ctx->sq_sqes);
percpu_ref_exit(&ctx->refs);
free_uid(ctx->user);
put_cred(ctx->creds);
kfree(ctx->cancel_hash);
kmem_cache_free(req_cachep, ctx->fallback_req);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
kfree(ctx);
}
static __poll_t io_uring_poll(struct file *file, poll_table *wait)
{
struct io_ring_ctx *ctx = file->private_data;
__poll_t mask = 0;
poll_wait(file, &ctx->cq_wait, wait);
/*
* synchronizes with barrier from wq_has_sleeper call in
* io_commit_cqring
*/
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
smp_rmb();
if (!io_sqring_full(ctx))
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
mask |= EPOLLOUT | EPOLLWRNORM;
if (io_cqring_events(ctx, false))
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
mask |= EPOLLIN | EPOLLRDNORM;
return mask;
}
static int io_uring_fasync(int fd, struct file *file, int on)
{
struct io_ring_ctx *ctx = file->private_data;
return fasync_helper(fd, file, on, &ctx->cq_fasync);
}
static int io_remove_personalities(int id, void *p, void *data)
{
struct io_ring_ctx *ctx = data;
struct io_identity *iod;
iod = idr_remove(&ctx->personality_idr, id);
if (iod) {
put_cred(iod->creds);
if (refcount_dec_and_test(&iod->count))
kfree(iod);
}
return 0;
}
static void io_ring_exit_work(struct work_struct *work)
{
struct io_ring_ctx *ctx = container_of(work, struct io_ring_ctx,
exit_work);
/*
* If we're doing polled IO and end up having requests being
* submitted async (out-of-line), then completions can come in while
* we're waiting for refs to drop. We need to reap these manually,
* as nobody else will be looking for them.
*/
do {
io_iopoll_try_reap_events(ctx);
} while (!wait_for_completion_timeout(&ctx->ref_comp, HZ/20));
io_ring_ctx_free(ctx);
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static void io_ring_ctx_wait_and_kill(struct io_ring_ctx *ctx)
{
mutex_lock(&ctx->uring_lock);
percpu_ref_kill(&ctx->refs);
/* if force is set, the ring is going away. always drop after that */
ctx->cq_overflow_flushed = 1;
if (ctx->rings)
io_cqring_overflow_flush(ctx, true, NULL, NULL);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
mutex_unlock(&ctx->uring_lock);
io_kill_timeouts(ctx, NULL, NULL);
io_poll_remove_all(ctx, NULL, NULL);
if (ctx->io_wq)
io_wq_cancel_all(ctx->io_wq);
io_uring: check for validity of ->rings in teardown Normally the rings are always valid, the exception is if we failed to allocate the rings at setup time. syzbot reports this: RSP: 002b:00007ffd6e8aa078 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441229 RDX: 0000000000000002 RSI: 0000000020000140 RDI: 0000000000000d0d RBP: 00007ffd6e8aa090 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8903 Comm: syz-executor410 Not tainted 5.4.0-rc7-next-20191113 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline] RIP: 0010:__io_commit_cqring fs/io_uring.c:496 [inline] RIP: 0010:io_commit_cqring+0x1e1/0xdb0 fs/io_uring.c:592 Code: 03 0f 8e df 09 00 00 48 8b 45 d0 4c 8d a3 c0 00 00 00 4c 89 e2 48 c1 ea 03 44 8b b8 c0 01 00 00 48 b8 00 00 00 00 00 fc ff df <0f> b6 14 02 4c 89 e0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 61 RSP: 0018:ffff88808f51fc08 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff815abe4a RDX: 0000000000000018 RSI: ffffffff81d168d5 RDI: ffff8880a9166100 RBP: ffff88808f51fc70 R08: 0000000000000004 R09: ffffed1011ea3f7d R10: ffffed1011ea3f7c R11: 0000000000000003 R12: 00000000000000c0 R13: ffff8880a91661c0 R14: 1ffff1101522cc10 R15: 0000000000000000 FS: 0000000001e7a880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000140 CR3: 000000009a74c000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: io_cqring_overflow_flush+0x6b9/0xa90 fs/io_uring.c:673 io_ring_ctx_wait_and_kill+0x24f/0x7c0 fs/io_uring.c:4260 io_uring_create fs/io_uring.c:4600 [inline] io_uring_setup+0x1256/0x1cc0 fs/io_uring.c:4626 __do_sys_io_uring_setup fs/io_uring.c:4639 [inline] __se_sys_io_uring_setup fs/io_uring.c:4636 [inline] __x64_sys_io_uring_setup+0x54/0x80 fs/io_uring.c:4636 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441229 Code: e8 5c ae 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd6e8aa078 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441229 RDX: 0000000000000002 RSI: 0000000020000140 RDI: 0000000000000d0d RBP: 00007ffd6e8aa090 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace b0f5b127a57f623f ]--- RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline] RIP: 0010:__io_commit_cqring fs/io_uring.c:496 [inline] RIP: 0010:io_commit_cqring+0x1e1/0xdb0 fs/io_uring.c:592 Code: 03 0f 8e df 09 00 00 48 8b 45 d0 4c 8d a3 c0 00 00 00 4c 89 e2 48 c1 ea 03 44 8b b8 c0 01 00 00 48 b8 00 00 00 00 00 fc ff df <0f> b6 14 02 4c 89 e0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 61 RSP: 0018:ffff88808f51fc08 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff815abe4a RDX: 0000000000000018 RSI: ffffffff81d168d5 RDI: ffff8880a9166100 RBP: ffff88808f51fc70 R08: 0000000000000004 R09: ffffed1011ea3f7d R10: ffffed1011ea3f7c R11: 0000000000000003 R12: 00000000000000c0 R13: ffff8880a91661c0 R14: 1ffff1101522cc10 R15: 0000000000000000 FS: 0000000001e7a880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000140 CR3: 000000009a74c000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 which is exactly the case of failing to allocate the SQ/CQ rings, and then entering shutdown. Check if the rings are valid before trying to access them at shutdown time. Reported-by: syzbot+21147d79607d724bd6f3@syzkaller.appspotmail.com Fixes: 1d7bb1d50fb4 ("io_uring: add support for backlogged CQ ring") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 00:09:23 +08:00
/* if we failed setting up the ctx, we might not have any rings */
io_iopoll_try_reap_events(ctx);
idr_for_each(&ctx->personality_idr, io_remove_personalities, ctx);
/*
* Do this upfront, so we won't have a grace period where the ring
* is closed but resources aren't reaped yet. This can cause
* spurious failure in setting up a new ring.
*/
io_unaccount_mem(ctx, ring_pages(ctx->sq_entries, ctx->cq_entries),
ACCT_LOCKED);
INIT_WORK(&ctx->exit_work, io_ring_exit_work);
/*
* Use system_unbound_wq to avoid spawning tons of event kworkers
* if we're exiting a ton of rings at the same time. It just adds
* noise and overhead, there's no discernable change in runtime
* over using system_wq.
*/
queue_work(system_unbound_wq, &ctx->exit_work);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
static int io_uring_release(struct inode *inode, struct file *file)
{
struct io_ring_ctx *ctx = file->private_data;
file->private_data = NULL;
io_ring_ctx_wait_and_kill(ctx);
return 0;
}
struct io_task_cancel {
struct task_struct *task;
struct files_struct *files;
};
static bool io_cancel_task_cb(struct io_wq_work *work, void *data)
{
struct io_kiocb *req = container_of(work, struct io_kiocb, work);
struct io_task_cancel *cancel = data;
bool ret;
if (cancel->files && (req->flags & REQ_F_LINK_TIMEOUT)) {
unsigned long flags;
struct io_ring_ctx *ctx = req->ctx;
/* protect against races with linked timeouts */
spin_lock_irqsave(&ctx->completion_lock, flags);
ret = io_match_task(req, cancel->task, cancel->files);
spin_unlock_irqrestore(&ctx->completion_lock, flags);
} else {
ret = io_match_task(req, cancel->task, cancel->files);
}
return ret;
}
static void io_cancel_defer_files(struct io_ring_ctx *ctx,
struct task_struct *task,
struct files_struct *files)
{
struct io_defer_entry *de = NULL;
LIST_HEAD(list);
spin_lock_irq(&ctx->completion_lock);
list_for_each_entry_reverse(de, &ctx->defer_list, list) {
if (io_match_task(de->req, task, files)) {
list_cut_position(&list, &ctx->defer_list, &de->list);
break;
}
}
spin_unlock_irq(&ctx->completion_lock);
while (!list_empty(&list)) {
de = list_first_entry(&list, struct io_defer_entry, list);
list_del_init(&de->list);
req_set_fail_links(de->req);
io_put_req(de->req);
io_req_complete(de->req, -ECANCELED);
kfree(de);
}
}
static void io_uring_cancel_files(struct io_ring_ctx *ctx,
struct task_struct *task,
struct files_struct *files)
{
while (!list_empty_careful(&ctx->inflight_list)) {
struct io_task_cancel cancel = { .task = task, .files = files };
struct io_kiocb *req;
DEFINE_WAIT(wait);
bool found = false;
spin_lock_irq(&ctx->inflight_lock);
list_for_each_entry(req, &ctx->inflight_list, inflight_entry) {
if (req->task != task ||
req->work.identity->files != files)
continue;
found = true;
break;
}
if (found)
prepare_to_wait(&task->io_uring->wait, &wait,
TASK_UNINTERRUPTIBLE);
spin_unlock_irq(&ctx->inflight_lock);
/* We need to keep going until we don't find a matching req */
if (!found)
break;
io_wq_cancel_cb(ctx->io_wq, io_cancel_task_cb, &cancel, true);
io_poll_remove_all(ctx, task, files);
io_kill_timeouts(ctx, task, files);
/* cancellations _may_ trigger task work */
io_run_task_work();
schedule();
finish_wait(&task->io_uring->wait, &wait);
}
}
static void __io_uring_cancel_task_requests(struct io_ring_ctx *ctx,
struct task_struct *task)
{
while (1) {
struct io_task_cancel cancel = { .task = task, .files = NULL, };
enum io_wq_cancel cret;
bool ret = false;
cret = io_wq_cancel_cb(ctx->io_wq, io_cancel_task_cb, &cancel, true);
if (cret != IO_WQ_CANCEL_NOTFOUND)
ret = true;
/* SQPOLL thread does its own polling */
if (!(ctx->flags & IORING_SETUP_SQPOLL)) {
while (!list_empty_careful(&ctx->iopoll_list)) {
io_iopoll_try_reap_events(ctx);
ret = true;
}
}
ret |= io_poll_remove_all(ctx, task, NULL);
ret |= io_kill_timeouts(ctx, task, NULL);
if (!ret)
break;
io_run_task_work();
cond_resched();
}
}
/*
* We need to iteratively cancel requests, in case a request has dependent
* hard links. These persist even for failure of cancelations, hence keep
* looping until none are found.
*/
static void io_uring_cancel_task_requests(struct io_ring_ctx *ctx,
struct files_struct *files)
{
struct task_struct *task = current;
if ((ctx->flags & IORING_SETUP_SQPOLL) && ctx->sq_data) {
task = ctx->sq_data->thread;
atomic_inc(&task->io_uring->in_idle);
io_sq_thread_park(ctx->sq_data);
}
io_cancel_defer_files(ctx, task, files);
io_ring_submit_lock(ctx, (ctx->flags & IORING_SETUP_IOPOLL));
io_cqring_overflow_flush(ctx, true, task, files);
io_ring_submit_unlock(ctx, (ctx->flags & IORING_SETUP_IOPOLL));
if (!files)
__io_uring_cancel_task_requests(ctx, task);
else
io_uring_cancel_files(ctx, task, files);
if ((ctx->flags & IORING_SETUP_SQPOLL) && ctx->sq_data) {
atomic_dec(&task->io_uring->in_idle);
/*
* If the files that are going away are the ones in the thread
* identity, clear them out.
*/
if (task->io_uring->identity->files == files)
task->io_uring->identity->files = NULL;
io_sq_thread_unpark(ctx->sq_data);
}
}
/*
* Note that this task has used io_uring. We use it for cancelation purposes.
*/
static int io_uring_add_task_file(struct io_ring_ctx *ctx, struct file *file)
{
struct io_uring_task *tctx = current->io_uring;
if (unlikely(!tctx)) {
int ret;
ret = io_uring_alloc_task_context(current);
if (unlikely(ret))
return ret;
tctx = current->io_uring;
}
if (tctx->last != file) {
void *old = xa_load(&tctx->xa, (unsigned long)file);
if (!old) {
get_file(file);
xa_store(&tctx->xa, (unsigned long)file, file, GFP_KERNEL);
}
tctx->last = file;
}
/*
* This is race safe in that the task itself is doing this, hence it
* cannot be going through the exit/cancel paths at the same time.
* This cannot be modified while exit/cancel is running.
*/
if (!tctx->sqpoll && (ctx->flags & IORING_SETUP_SQPOLL))
tctx->sqpoll = true;
return 0;
}
/*
* Remove this io_uring_file -> task mapping.
*/
static void io_uring_del_task_file(struct file *file)
{
struct io_uring_task *tctx = current->io_uring;
if (tctx->last == file)
tctx->last = NULL;
file = xa_erase(&tctx->xa, (unsigned long)file);
if (file)
fput(file);
}
/*
* Drop task note for this file if we're the only ones that hold it after
* pending fput()
*/
static void io_uring_attempt_task_drop(struct file *file)
{
if (!current->io_uring)
return;
/*
* fput() is pending, will be 2 if the only other ref is our potential
* task file note. If the task is exiting, drop regardless of count.
*/
if (fatal_signal_pending(current) || (current->flags & PF_EXITING) ||
atomic_long_read(&file->f_count) == 2)
io_uring_del_task_file(file);
}
void __io_uring_files_cancel(struct files_struct *files)
{
struct io_uring_task *tctx = current->io_uring;
struct file *file;
unsigned long index;
/* make sure overflow events are dropped */
atomic_inc(&tctx->in_idle);
xa_for_each(&tctx->xa, index, file) {
struct io_ring_ctx *ctx = file->private_data;
io_uring_cancel_task_requests(ctx, files);
if (files)
io_uring_del_task_file(file);
}
atomic_dec(&tctx->in_idle);
}
static s64 tctx_inflight(struct io_uring_task *tctx)
{
unsigned long index;
struct file *file;
s64 inflight;
inflight = percpu_counter_sum(&tctx->inflight);
if (!tctx->sqpoll)
return inflight;
/*
* If we have SQPOLL rings, then we need to iterate and find them, and
* add the pending count for those.
*/
xa_for_each(&tctx->xa, index, file) {
struct io_ring_ctx *ctx = file->private_data;
if (ctx->flags & IORING_SETUP_SQPOLL) {
struct io_uring_task *__tctx = ctx->sqo_task->io_uring;
inflight += percpu_counter_sum(&__tctx->inflight);
}
}
return inflight;
}
/*
* Find any io_uring fd that this task has registered or done IO on, and cancel
* requests.
*/
void __io_uring_task_cancel(void)
{
struct io_uring_task *tctx = current->io_uring;
DEFINE_WAIT(wait);
s64 inflight;
/* make sure overflow events are dropped */
atomic_inc(&tctx->in_idle);
do {
/* read completions before cancelations */
inflight = tctx_inflight(tctx);
if (!inflight)
break;
__io_uring_files_cancel(NULL);
prepare_to_wait(&tctx->wait, &wait, TASK_UNINTERRUPTIBLE);
/*
* If we've seen completions, retry. This avoids a race where
* a completion comes in before we did prepare_to_wait().
*/
if (inflight != tctx_inflight(tctx))
continue;
schedule();
} while (1);
finish_wait(&tctx->wait, &wait);
atomic_dec(&tctx->in_idle);
}
static int io_uring_flush(struct file *file, void *data)
{
io_uring_attempt_task_drop(file);
return 0;
}
static void *io_uring_validate_mmap_request(struct file *file,
loff_t pgoff, size_t sz)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_ring_ctx *ctx = file->private_data;
loff_t offset = pgoff << PAGE_SHIFT;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
struct page *page;
void *ptr;
switch (offset) {
case IORING_OFF_SQ_RING:
case IORING_OFF_CQ_RING:
ptr = ctx->rings;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
break;
case IORING_OFF_SQES:
ptr = ctx->sq_sqes;
break;
default:
return ERR_PTR(-EINVAL);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
page = virt_to_head_page(ptr);
if (sz > page_size(page))
return ERR_PTR(-EINVAL);
return ptr;
}
#ifdef CONFIG_MMU
static int io_uring_mmap(struct file *file, struct vm_area_struct *vma)
{
size_t sz = vma->vm_end - vma->vm_start;
unsigned long pfn;
void *ptr;
ptr = io_uring_validate_mmap_request(file, vma->vm_pgoff, sz);
if (IS_ERR(ptr))
return PTR_ERR(ptr);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
pfn = virt_to_phys(ptr) >> PAGE_SHIFT;
return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot);
}
#else /* !CONFIG_MMU */
static int io_uring_mmap(struct file *file, struct vm_area_struct *vma)
{
return vma->vm_flags & (VM_SHARED | VM_MAYSHARE) ? 0 : -EINVAL;
}
static unsigned int io_uring_nommu_mmap_capabilities(struct file *file)
{
return NOMMU_MAP_DIRECT | NOMMU_MAP_READ | NOMMU_MAP_WRITE;
}
static unsigned long io_uring_nommu_get_unmapped_area(struct file *file,
unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags)
{
void *ptr;
ptr = io_uring_validate_mmap_request(file, pgoff, len);
if (IS_ERR(ptr))
return PTR_ERR(ptr);
return (unsigned long) ptr;
}
#endif /* !CONFIG_MMU */
static void io_sqpoll_wait_sq(struct io_ring_ctx *ctx)
{
DEFINE_WAIT(wait);
do {
if (!io_sqring_full(ctx))
break;
prepare_to_wait(&ctx->sqo_sq_wait, &wait, TASK_INTERRUPTIBLE);
if (!io_sqring_full(ctx))
break;
schedule();
} while (!signal_pending(current));
finish_wait(&ctx->sqo_sq_wait, &wait);
}
static int io_get_ext_arg(unsigned flags, const void __user *argp, size_t *argsz,
struct __kernel_timespec __user **ts,
const sigset_t __user **sig)
{
struct io_uring_getevents_arg arg;
/*
* If EXT_ARG isn't set, then we have no timespec and the argp pointer
* is just a pointer to the sigset_t.
*/
if (!(flags & IORING_ENTER_EXT_ARG)) {
*sig = (const sigset_t __user *) argp;
*ts = NULL;
return 0;
}
/*
* EXT_ARG is set - ensure we agree on the size of it and copy in our
* timespec and sigset_t pointers if good.
*/
if (*argsz != sizeof(arg))
return -EINVAL;
if (copy_from_user(&arg, argp, sizeof(arg)))
return -EFAULT;
*sig = u64_to_user_ptr(arg.sigmask);
*argsz = arg.sigmask_sz;
*ts = u64_to_user_ptr(arg.ts);
return 0;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit,
u32, min_complete, u32, flags, const void __user *, argp,
size_t, argsz)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct io_ring_ctx *ctx;
long ret = -EBADF;
int submitted = 0;
struct fd f;
io_run_task_work();
if (flags & ~(IORING_ENTER_GETEVENTS | IORING_ENTER_SQ_WAKEUP |
IORING_ENTER_SQ_WAIT | IORING_ENTER_EXT_ARG))
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return -EINVAL;
f = fdget(fd);
if (!f.file)
return -EBADF;
ret = -EOPNOTSUPP;
if (f.file->f_op != &io_uring_fops)
goto out_fput;
ret = -ENXIO;
ctx = f.file->private_data;
if (!percpu_ref_tryget(&ctx->refs))
goto out_fput;
ret = -EBADFD;
if (ctx->flags & IORING_SETUP_R_DISABLED)
goto out;
/*
* For SQ polling, the thread will do all submissions and completions.
* Just return the requested submit count, and wake the thread if
* we were asked to.
*/
ret = 0;
if (ctx->flags & IORING_SETUP_SQPOLL) {
io_ring_submit_lock(ctx, (ctx->flags & IORING_SETUP_IOPOLL));
if (!list_empty_careful(&ctx->cq_overflow_list))
io_cqring_overflow_flush(ctx, false, NULL, NULL);
io_ring_submit_unlock(ctx, (ctx->flags & IORING_SETUP_IOPOLL));
if (flags & IORING_ENTER_SQ_WAKEUP)
wake_up(&ctx->sq_data->wait);
if (flags & IORING_ENTER_SQ_WAIT)
io_sqpoll_wait_sq(ctx);
submitted = to_submit;
} else if (to_submit) {
ret = io_uring_add_task_file(ctx, f.file);
if (unlikely(ret))
goto out;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
mutex_lock(&ctx->uring_lock);
submitted = io_submit_sqes(ctx, to_submit);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
mutex_unlock(&ctx->uring_lock);
if (submitted != to_submit)
goto out;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
if (flags & IORING_ENTER_GETEVENTS) {
const sigset_t __user *sig;
struct __kernel_timespec __user *ts;
ret = io_get_ext_arg(flags, argp, &argsz, &ts, &sig);
if (unlikely(ret))
goto out;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
min_complete = min(min_complete, ctx->cq_entries);
io_uring: io_uring_enter(2) don't poll while SETUP_IOPOLL|SETUP_SQPOLL enabled When SETUP_IOPOLL and SETUP_SQPOLL are both enabled, applications don't need to do io completion events polling again, they can rely on io_sq_thread to do polling work, which can reduce cpu usage and uring_lock contention. I modify fio io_uring engine codes a bit to evaluate the performance: static int fio_ioring_getevents(struct thread_data *td, unsigned int min, continue; } - if (!o->sqpoll_thread) { + if (o->sqpoll_thread && o->hipri) { r = io_uring_enter(ld, 0, actual_min, IORING_ENTER_GETEVENTS); if (r < 0) { and use "fio -name=fiotest -filename=/dev/nvme0n1 -iodepth=$depth -thread -rw=read -ioengine=io_uring -hipri=1 -sqthread_poll=1 -direct=1 -bs=4k -size=10G -numjobs=1 -time_based -runtime=120" original codes -------------------------------------------------------------------- iodepth | 4 | 8 | 16 | 32 | 64 bw | 1133MB/s | 1519MB/s | 2090MB/s | 2710MB/s | 3012MB/s fio cpu usage | 100% | 100% | 100% | 100% | 100% -------------------------------------------------------------------- with patch -------------------------------------------------------------------- iodepth | 4 | 8 | 16 | 32 | 64 bw | 1196MB/s | 1721MB/s | 2351MB/s | 2977MB/s | 3357MB/s fio cpu usage | 63.8% | 74.4%% | 81.1% | 83.7% | 82.4% -------------------------------------------------------------------- bw improve | 5.5% | 13.2% | 12.3% | 9.8% | 11.5% -------------------------------------------------------------------- From above test results, we can see that bw has above 5.5%~13% improvement, and fio process's cpu usage also drops much. Note this won't improve io_sq_thread's cpu usage when SETUP_IOPOLL|SETUP_SQPOLL are both enabled, in this case, io_sq_thread always has 100% cpu usage. I think this patch will be friendly to applications which will often use io_uring_wait_cqe() or similar from liburing. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-11 09:26:09 +08:00
/*
* When SETUP_IOPOLL and SETUP_SQPOLL are both enabled, user
* space applications don't need to do io completion events
* polling again, they can rely on io_sq_thread to do polling
* work, which can reduce cpu usage and uring_lock contention.
*/
if (ctx->flags & IORING_SETUP_IOPOLL &&
!(ctx->flags & IORING_SETUP_SQPOLL)) {
ret = io_iopoll_check(ctx, min_complete);
} else {
ret = io_cqring_wait(ctx, min_complete, sig, argsz, ts);
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
out:
percpu_ref_put(&ctx->refs);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
out_fput:
fdput(f);
return submitted ? submitted : ret;
}
#ifdef CONFIG_PROC_FS
static int io_uring_show_cred(int id, void *p, void *data)
{
struct io_identity *iod = p;
const struct cred *cred = iod->creds;
struct seq_file *m = data;
struct user_namespace *uns = seq_user_ns(m);
struct group_info *gi;
kernel_cap_t cap;
unsigned __capi;
int g;
seq_printf(m, "%5d\n", id);
seq_put_decimal_ull(m, "\tUid:\t", from_kuid_munged(uns, cred->uid));
seq_put_decimal_ull(m, "\t\t", from_kuid_munged(uns, cred->euid));
seq_put_decimal_ull(m, "\t\t", from_kuid_munged(uns, cred->suid));
seq_put_decimal_ull(m, "\t\t", from_kuid_munged(uns, cred->fsuid));
seq_put_decimal_ull(m, "\n\tGid:\t", from_kgid_munged(uns, cred->gid));
seq_put_decimal_ull(m, "\t\t", from_kgid_munged(uns, cred->egid));
seq_put_decimal_ull(m, "\t\t", from_kgid_munged(uns, cred->sgid));
seq_put_decimal_ull(m, "\t\t", from_kgid_munged(uns, cred->fsgid));
seq_puts(m, "\n\tGroups:\t");
gi = cred->group_info;
for (g = 0; g < gi->ngroups; g++) {
seq_put_decimal_ull(m, g ? " " : "",
from_kgid_munged(uns, gi->gid[g]));
}
seq_puts(m, "\n\tCapEff:\t");
cap = cred->cap_effective;
CAP_FOR_EACH_U32(__capi)
seq_put_hex_ll(m, NULL, cap.cap[CAP_LAST_U32 - __capi], 8);
seq_putc(m, '\n');
return 0;
}
static void __io_uring_show_fdinfo(struct io_ring_ctx *ctx, struct seq_file *m)
{
struct io_sq_data *sq = NULL;
io_uring: fix potential ABBA deadlock in ->show_fdinfo() syzbot reports a potential lock deadlock between the normal IO path and ->show_fdinfo(): ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc6-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.2/19710 is trying to acquire lock: ffff888098ddc450 (sb_writers#4){.+.+}-{0:0}, at: io_write+0x6b5/0xb30 fs/io_uring.c:3296 but task is already holding lock: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ctx->uring_lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 __io_uring_show_fdinfo fs/io_uring.c:8417 [inline] io_uring_show_fdinfo+0x194/0xc70 fs/io_uring.c:8460 seq_show+0x4a8/0x700 fs/proc/fd.c:65 seq_read+0x432/0x1070 fs/seq_file.c:208 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&p->lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 seq_read+0x61/0x1070 fs/seq_file.c:155 pde_read fs/proc/inode.c:306 [inline] proc_reg_read+0x221/0x300 fs/proc/inode.c:318 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (sb_writers#4){.+.+}-{0:0}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: sb_writers#4 --> &p->lock --> &ctx->uring_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctx->uring_lock); lock(&p->lock); lock(&ctx->uring_lock); lock(sb_writers#4); *** DEADLOCK *** 1 lock held by syz-executor.2/19710: #0: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 stack backtrace: CPU: 0 PID: 19710 Comm: syz-executor.2 Not tainted 5.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45e179 Code: 3d b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 0b b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1194e74c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00000000000082c0 RCX: 000000000045e179 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 000000000118cf98 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cf4c R13: 00007ffd1aa5756f R14: 00007f1194e759c0 R15: 000000000118cf4c Fix this by just not diving into details if we fail to trylock the io_uring mutex. We know the ctx isn't going away during this operation, but we cannot safely iterate buffers/files/personalities if we don't hold the io_uring mutex. Reported-by: syzbot+2f8fa4e860edc3066aba@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28 22:57:48 +08:00
bool has_lock;
int i;
io_uring: fix potential ABBA deadlock in ->show_fdinfo() syzbot reports a potential lock deadlock between the normal IO path and ->show_fdinfo(): ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc6-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.2/19710 is trying to acquire lock: ffff888098ddc450 (sb_writers#4){.+.+}-{0:0}, at: io_write+0x6b5/0xb30 fs/io_uring.c:3296 but task is already holding lock: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ctx->uring_lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 __io_uring_show_fdinfo fs/io_uring.c:8417 [inline] io_uring_show_fdinfo+0x194/0xc70 fs/io_uring.c:8460 seq_show+0x4a8/0x700 fs/proc/fd.c:65 seq_read+0x432/0x1070 fs/seq_file.c:208 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&p->lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 seq_read+0x61/0x1070 fs/seq_file.c:155 pde_read fs/proc/inode.c:306 [inline] proc_reg_read+0x221/0x300 fs/proc/inode.c:318 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (sb_writers#4){.+.+}-{0:0}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: sb_writers#4 --> &p->lock --> &ctx->uring_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctx->uring_lock); lock(&p->lock); lock(&ctx->uring_lock); lock(sb_writers#4); *** DEADLOCK *** 1 lock held by syz-executor.2/19710: #0: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 stack backtrace: CPU: 0 PID: 19710 Comm: syz-executor.2 Not tainted 5.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45e179 Code: 3d b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 0b b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1194e74c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00000000000082c0 RCX: 000000000045e179 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 000000000118cf98 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cf4c R13: 00007ffd1aa5756f R14: 00007f1194e759c0 R15: 000000000118cf4c Fix this by just not diving into details if we fail to trylock the io_uring mutex. We know the ctx isn't going away during this operation, but we cannot safely iterate buffers/files/personalities if we don't hold the io_uring mutex. Reported-by: syzbot+2f8fa4e860edc3066aba@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28 22:57:48 +08:00
/*
* Avoid ABBA deadlock between the seq lock and the io_uring mutex,
* since fdinfo case grabs it in the opposite direction of normal use
* cases. If we fail to get the lock, we just don't iterate any
* structures that could be going away outside the io_uring mutex.
*/
has_lock = mutex_trylock(&ctx->uring_lock);
if (has_lock && (ctx->flags & IORING_SETUP_SQPOLL))
sq = ctx->sq_data;
seq_printf(m, "SqThread:\t%d\n", sq ? task_pid_nr(sq->thread) : -1);
seq_printf(m, "SqThreadCpu:\t%d\n", sq ? task_cpu(sq->thread) : -1);
seq_printf(m, "UserFiles:\t%u\n", ctx->nr_user_files);
io_uring: fix potential ABBA deadlock in ->show_fdinfo() syzbot reports a potential lock deadlock between the normal IO path and ->show_fdinfo(): ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc6-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.2/19710 is trying to acquire lock: ffff888098ddc450 (sb_writers#4){.+.+}-{0:0}, at: io_write+0x6b5/0xb30 fs/io_uring.c:3296 but task is already holding lock: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ctx->uring_lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 __io_uring_show_fdinfo fs/io_uring.c:8417 [inline] io_uring_show_fdinfo+0x194/0xc70 fs/io_uring.c:8460 seq_show+0x4a8/0x700 fs/proc/fd.c:65 seq_read+0x432/0x1070 fs/seq_file.c:208 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&p->lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 seq_read+0x61/0x1070 fs/seq_file.c:155 pde_read fs/proc/inode.c:306 [inline] proc_reg_read+0x221/0x300 fs/proc/inode.c:318 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (sb_writers#4){.+.+}-{0:0}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: sb_writers#4 --> &p->lock --> &ctx->uring_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctx->uring_lock); lock(&p->lock); lock(&ctx->uring_lock); lock(sb_writers#4); *** DEADLOCK *** 1 lock held by syz-executor.2/19710: #0: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 stack backtrace: CPU: 0 PID: 19710 Comm: syz-executor.2 Not tainted 5.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45e179 Code: 3d b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 0b b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1194e74c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00000000000082c0 RCX: 000000000045e179 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 000000000118cf98 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cf4c R13: 00007ffd1aa5756f R14: 00007f1194e759c0 R15: 000000000118cf4c Fix this by just not diving into details if we fail to trylock the io_uring mutex. We know the ctx isn't going away during this operation, but we cannot safely iterate buffers/files/personalities if we don't hold the io_uring mutex. Reported-by: syzbot+2f8fa4e860edc3066aba@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28 22:57:48 +08:00
for (i = 0; has_lock && i < ctx->nr_user_files; i++) {
struct fixed_file_table *table;
struct file *f;
table = &ctx->file_data->table[i >> IORING_FILE_TABLE_SHIFT];
f = table->files[i & IORING_FILE_TABLE_MASK];
if (f)
seq_printf(m, "%5u: %s\n", i, file_dentry(f)->d_iname);
else
seq_printf(m, "%5u: <none>\n", i);
}
seq_printf(m, "UserBufs:\t%u\n", ctx->nr_user_bufs);
io_uring: fix potential ABBA deadlock in ->show_fdinfo() syzbot reports a potential lock deadlock between the normal IO path and ->show_fdinfo(): ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc6-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.2/19710 is trying to acquire lock: ffff888098ddc450 (sb_writers#4){.+.+}-{0:0}, at: io_write+0x6b5/0xb30 fs/io_uring.c:3296 but task is already holding lock: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ctx->uring_lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 __io_uring_show_fdinfo fs/io_uring.c:8417 [inline] io_uring_show_fdinfo+0x194/0xc70 fs/io_uring.c:8460 seq_show+0x4a8/0x700 fs/proc/fd.c:65 seq_read+0x432/0x1070 fs/seq_file.c:208 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&p->lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 seq_read+0x61/0x1070 fs/seq_file.c:155 pde_read fs/proc/inode.c:306 [inline] proc_reg_read+0x221/0x300 fs/proc/inode.c:318 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (sb_writers#4){.+.+}-{0:0}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: sb_writers#4 --> &p->lock --> &ctx->uring_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctx->uring_lock); lock(&p->lock); lock(&ctx->uring_lock); lock(sb_writers#4); *** DEADLOCK *** 1 lock held by syz-executor.2/19710: #0: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 stack backtrace: CPU: 0 PID: 19710 Comm: syz-executor.2 Not tainted 5.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45e179 Code: 3d b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 0b b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1194e74c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00000000000082c0 RCX: 000000000045e179 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 000000000118cf98 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cf4c R13: 00007ffd1aa5756f R14: 00007f1194e759c0 R15: 000000000118cf4c Fix this by just not diving into details if we fail to trylock the io_uring mutex. We know the ctx isn't going away during this operation, but we cannot safely iterate buffers/files/personalities if we don't hold the io_uring mutex. Reported-by: syzbot+2f8fa4e860edc3066aba@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28 22:57:48 +08:00
for (i = 0; has_lock && i < ctx->nr_user_bufs; i++) {
struct io_mapped_ubuf *buf = &ctx->user_bufs[i];
seq_printf(m, "%5u: 0x%llx/%u\n", i, buf->ubuf,
(unsigned int) buf->len);
}
io_uring: fix potential ABBA deadlock in ->show_fdinfo() syzbot reports a potential lock deadlock between the normal IO path and ->show_fdinfo(): ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc6-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.2/19710 is trying to acquire lock: ffff888098ddc450 (sb_writers#4){.+.+}-{0:0}, at: io_write+0x6b5/0xb30 fs/io_uring.c:3296 but task is already holding lock: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ctx->uring_lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 __io_uring_show_fdinfo fs/io_uring.c:8417 [inline] io_uring_show_fdinfo+0x194/0xc70 fs/io_uring.c:8460 seq_show+0x4a8/0x700 fs/proc/fd.c:65 seq_read+0x432/0x1070 fs/seq_file.c:208 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&p->lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 seq_read+0x61/0x1070 fs/seq_file.c:155 pde_read fs/proc/inode.c:306 [inline] proc_reg_read+0x221/0x300 fs/proc/inode.c:318 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (sb_writers#4){.+.+}-{0:0}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: sb_writers#4 --> &p->lock --> &ctx->uring_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctx->uring_lock); lock(&p->lock); lock(&ctx->uring_lock); lock(sb_writers#4); *** DEADLOCK *** 1 lock held by syz-executor.2/19710: #0: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 stack backtrace: CPU: 0 PID: 19710 Comm: syz-executor.2 Not tainted 5.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45e179 Code: 3d b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 0b b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1194e74c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00000000000082c0 RCX: 000000000045e179 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 000000000118cf98 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cf4c R13: 00007ffd1aa5756f R14: 00007f1194e759c0 R15: 000000000118cf4c Fix this by just not diving into details if we fail to trylock the io_uring mutex. We know the ctx isn't going away during this operation, but we cannot safely iterate buffers/files/personalities if we don't hold the io_uring mutex. Reported-by: syzbot+2f8fa4e860edc3066aba@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28 22:57:48 +08:00
if (has_lock && !idr_is_empty(&ctx->personality_idr)) {
seq_printf(m, "Personalities:\n");
idr_for_each(&ctx->personality_idr, io_uring_show_cred, m);
}
seq_printf(m, "PollList:\n");
spin_lock_irq(&ctx->completion_lock);
for (i = 0; i < (1U << ctx->cancel_hash_bits); i++) {
struct hlist_head *list = &ctx->cancel_hash[i];
struct io_kiocb *req;
hlist_for_each_entry(req, list, hash_node)
seq_printf(m, " op=%d, task_works=%d\n", req->opcode,
req->task->task_works != NULL);
}
spin_unlock_irq(&ctx->completion_lock);
io_uring: fix potential ABBA deadlock in ->show_fdinfo() syzbot reports a potential lock deadlock between the normal IO path and ->show_fdinfo(): ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc6-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.2/19710 is trying to acquire lock: ffff888098ddc450 (sb_writers#4){.+.+}-{0:0}, at: io_write+0x6b5/0xb30 fs/io_uring.c:3296 but task is already holding lock: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ctx->uring_lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 __io_uring_show_fdinfo fs/io_uring.c:8417 [inline] io_uring_show_fdinfo+0x194/0xc70 fs/io_uring.c:8460 seq_show+0x4a8/0x700 fs/proc/fd.c:65 seq_read+0x432/0x1070 fs/seq_file.c:208 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&p->lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 seq_read+0x61/0x1070 fs/seq_file.c:155 pde_read fs/proc/inode.c:306 [inline] proc_reg_read+0x221/0x300 fs/proc/inode.c:318 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (sb_writers#4){.+.+}-{0:0}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: sb_writers#4 --> &p->lock --> &ctx->uring_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctx->uring_lock); lock(&p->lock); lock(&ctx->uring_lock); lock(sb_writers#4); *** DEADLOCK *** 1 lock held by syz-executor.2/19710: #0: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 stack backtrace: CPU: 0 PID: 19710 Comm: syz-executor.2 Not tainted 5.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45e179 Code: 3d b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 0b b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1194e74c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00000000000082c0 RCX: 000000000045e179 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 000000000118cf98 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cf4c R13: 00007ffd1aa5756f R14: 00007f1194e759c0 R15: 000000000118cf4c Fix this by just not diving into details if we fail to trylock the io_uring mutex. We know the ctx isn't going away during this operation, but we cannot safely iterate buffers/files/personalities if we don't hold the io_uring mutex. Reported-by: syzbot+2f8fa4e860edc3066aba@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28 22:57:48 +08:00
if (has_lock)
mutex_unlock(&ctx->uring_lock);
}
static void io_uring_show_fdinfo(struct seq_file *m, struct file *f)
{
struct io_ring_ctx *ctx = f->private_data;
if (percpu_ref_tryget(&ctx->refs)) {
__io_uring_show_fdinfo(ctx, m);
percpu_ref_put(&ctx->refs);
}
}
#endif
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static const struct file_operations io_uring_fops = {
.release = io_uring_release,
.flush = io_uring_flush,
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
.mmap = io_uring_mmap,
#ifndef CONFIG_MMU
.get_unmapped_area = io_uring_nommu_get_unmapped_area,
.mmap_capabilities = io_uring_nommu_mmap_capabilities,
#endif
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
.poll = io_uring_poll,
.fasync = io_uring_fasync,
#ifdef CONFIG_PROC_FS
.show_fdinfo = io_uring_show_fdinfo,
#endif
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
};
static int io_allocate_scq_urings(struct io_ring_ctx *ctx,
struct io_uring_params *p)
{
struct io_rings *rings;
size_t size, sq_array_offset;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/* make sure these are sane, as we already accounted them */
ctx->sq_entries = p->sq_entries;
ctx->cq_entries = p->cq_entries;
size = rings_size(p->sq_entries, p->cq_entries, &sq_array_offset);
if (size == SIZE_MAX)
return -EOVERFLOW;
rings = io_mem_alloc(size);
if (!rings)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return -ENOMEM;
ctx->rings = rings;
ctx->sq_array = (u32 *)((char *)rings + sq_array_offset);
rings->sq_ring_mask = p->sq_entries - 1;
rings->cq_ring_mask = p->cq_entries - 1;
rings->sq_ring_entries = p->sq_entries;
rings->cq_ring_entries = p->cq_entries;
ctx->sq_mask = rings->sq_ring_mask;
ctx->cq_mask = rings->cq_ring_mask;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
size = array_size(sizeof(struct io_uring_sqe), p->sq_entries);
if (size == SIZE_MAX) {
io_mem_free(ctx->rings);
ctx->rings = NULL;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return -EOVERFLOW;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
ctx->sq_sqes = io_mem_alloc(size);
if (!ctx->sq_sqes) {
io_mem_free(ctx->rings);
ctx->rings = NULL;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return -ENOMEM;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return 0;
}
/*
* Allocate an anonymous fd, this is what constitutes the application
* visible backing of an io_uring instance. The application mmaps this
* fd to gain access to the SQ/CQ ring details. If UNIX sockets are enabled,
* we have to tie this fd to a socket for file garbage collection purposes.
*/
static int io_uring_get_fd(struct io_ring_ctx *ctx)
{
struct file *file;
int ret;
io_uring: fix file leak on error path of io ctx creation Put file as part of error handling when setting up io ctx to fix memory leaks like the following one. BUG: memory leak unreferenced object 0xffff888101ea2200 (size 256): comm "syz-executor355", pid 8470, jiffies 4294953658 (age 32.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 20 59 03 01 81 88 ff ff 80 87 a8 10 81 88 ff ff Y.............. backtrace: [<000000002e0a7c5f>] kmem_cache_zalloc include/linux/slab.h:654 [inline] [<000000002e0a7c5f>] __alloc_file+0x1f/0x130 fs/file_table.c:101 [<000000001a55b73a>] alloc_empty_file+0x69/0x120 fs/file_table.c:151 [<00000000fb22349e>] alloc_file+0x33/0x1b0 fs/file_table.c:193 [<000000006e1465bb>] alloc_file_pseudo+0xb2/0x140 fs/file_table.c:233 [<000000007118092a>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<000000007118092a>] anon_inode_getfile+0xaa/0x120 fs/anon_inodes.c:74 [<000000002ae99012>] io_uring_get_fd fs/io_uring.c:9198 [inline] [<000000002ae99012>] io_uring_create fs/io_uring.c:9377 [inline] [<000000002ae99012>] io_uring_setup+0x1125/0x1630 fs/io_uring.c:9411 [<000000008280baad>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 [<00000000685d8cf0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: syzbot+71c4697e27c99fddcf17@syzkaller.appspotmail.com Fixes: 0f2122045b94 ("io_uring: don't rely on weak ->files references") Cc: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-08 23:54:26 +08:00
int fd;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
#if defined(CONFIG_UNIX)
ret = sock_create_kern(&init_net, PF_UNIX, SOCK_RAW, IPPROTO_IP,
&ctx->ring_sock);
if (ret)
return ret;
#endif
ret = get_unused_fd_flags(O_RDWR | O_CLOEXEC);
if (ret < 0)
goto err;
io_uring: fix file leak on error path of io ctx creation Put file as part of error handling when setting up io ctx to fix memory leaks like the following one. BUG: memory leak unreferenced object 0xffff888101ea2200 (size 256): comm "syz-executor355", pid 8470, jiffies 4294953658 (age 32.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 20 59 03 01 81 88 ff ff 80 87 a8 10 81 88 ff ff Y.............. backtrace: [<000000002e0a7c5f>] kmem_cache_zalloc include/linux/slab.h:654 [inline] [<000000002e0a7c5f>] __alloc_file+0x1f/0x130 fs/file_table.c:101 [<000000001a55b73a>] alloc_empty_file+0x69/0x120 fs/file_table.c:151 [<00000000fb22349e>] alloc_file+0x33/0x1b0 fs/file_table.c:193 [<000000006e1465bb>] alloc_file_pseudo+0xb2/0x140 fs/file_table.c:233 [<000000007118092a>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<000000007118092a>] anon_inode_getfile+0xaa/0x120 fs/anon_inodes.c:74 [<000000002ae99012>] io_uring_get_fd fs/io_uring.c:9198 [inline] [<000000002ae99012>] io_uring_create fs/io_uring.c:9377 [inline] [<000000002ae99012>] io_uring_setup+0x1125/0x1630 fs/io_uring.c:9411 [<000000008280baad>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 [<00000000685d8cf0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: syzbot+71c4697e27c99fddcf17@syzkaller.appspotmail.com Fixes: 0f2122045b94 ("io_uring: don't rely on weak ->files references") Cc: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-08 23:54:26 +08:00
fd = ret;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
file = anon_inode_getfile("[io_uring]", &io_uring_fops, ctx,
O_RDWR | O_CLOEXEC);
if (IS_ERR(file)) {
io_uring: fix file leak on error path of io ctx creation Put file as part of error handling when setting up io ctx to fix memory leaks like the following one. BUG: memory leak unreferenced object 0xffff888101ea2200 (size 256): comm "syz-executor355", pid 8470, jiffies 4294953658 (age 32.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 20 59 03 01 81 88 ff ff 80 87 a8 10 81 88 ff ff Y.............. backtrace: [<000000002e0a7c5f>] kmem_cache_zalloc include/linux/slab.h:654 [inline] [<000000002e0a7c5f>] __alloc_file+0x1f/0x130 fs/file_table.c:101 [<000000001a55b73a>] alloc_empty_file+0x69/0x120 fs/file_table.c:151 [<00000000fb22349e>] alloc_file+0x33/0x1b0 fs/file_table.c:193 [<000000006e1465bb>] alloc_file_pseudo+0xb2/0x140 fs/file_table.c:233 [<000000007118092a>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<000000007118092a>] anon_inode_getfile+0xaa/0x120 fs/anon_inodes.c:74 [<000000002ae99012>] io_uring_get_fd fs/io_uring.c:9198 [inline] [<000000002ae99012>] io_uring_create fs/io_uring.c:9377 [inline] [<000000002ae99012>] io_uring_setup+0x1125/0x1630 fs/io_uring.c:9411 [<000000008280baad>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 [<00000000685d8cf0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: syzbot+71c4697e27c99fddcf17@syzkaller.appspotmail.com Fixes: 0f2122045b94 ("io_uring: don't rely on weak ->files references") Cc: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-08 23:54:26 +08:00
put_unused_fd(fd);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
ret = PTR_ERR(file);
goto err;
}
#if defined(CONFIG_UNIX)
ctx->ring_sock->file = file;
#endif
io_uring: fix file leak on error path of io ctx creation Put file as part of error handling when setting up io ctx to fix memory leaks like the following one. BUG: memory leak unreferenced object 0xffff888101ea2200 (size 256): comm "syz-executor355", pid 8470, jiffies 4294953658 (age 32.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 20 59 03 01 81 88 ff ff 80 87 a8 10 81 88 ff ff Y.............. backtrace: [<000000002e0a7c5f>] kmem_cache_zalloc include/linux/slab.h:654 [inline] [<000000002e0a7c5f>] __alloc_file+0x1f/0x130 fs/file_table.c:101 [<000000001a55b73a>] alloc_empty_file+0x69/0x120 fs/file_table.c:151 [<00000000fb22349e>] alloc_file+0x33/0x1b0 fs/file_table.c:193 [<000000006e1465bb>] alloc_file_pseudo+0xb2/0x140 fs/file_table.c:233 [<000000007118092a>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<000000007118092a>] anon_inode_getfile+0xaa/0x120 fs/anon_inodes.c:74 [<000000002ae99012>] io_uring_get_fd fs/io_uring.c:9198 [inline] [<000000002ae99012>] io_uring_create fs/io_uring.c:9377 [inline] [<000000002ae99012>] io_uring_setup+0x1125/0x1630 fs/io_uring.c:9411 [<000000008280baad>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 [<00000000685d8cf0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: syzbot+71c4697e27c99fddcf17@syzkaller.appspotmail.com Fixes: 0f2122045b94 ("io_uring: don't rely on weak ->files references") Cc: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-08 23:54:26 +08:00
ret = io_uring_add_task_file(ctx, file);
if (ret) {
fput(file);
put_unused_fd(fd);
goto err;
}
io_uring: fix file leak on error path of io ctx creation Put file as part of error handling when setting up io ctx to fix memory leaks like the following one. BUG: memory leak unreferenced object 0xffff888101ea2200 (size 256): comm "syz-executor355", pid 8470, jiffies 4294953658 (age 32.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 20 59 03 01 81 88 ff ff 80 87 a8 10 81 88 ff ff Y.............. backtrace: [<000000002e0a7c5f>] kmem_cache_zalloc include/linux/slab.h:654 [inline] [<000000002e0a7c5f>] __alloc_file+0x1f/0x130 fs/file_table.c:101 [<000000001a55b73a>] alloc_empty_file+0x69/0x120 fs/file_table.c:151 [<00000000fb22349e>] alloc_file+0x33/0x1b0 fs/file_table.c:193 [<000000006e1465bb>] alloc_file_pseudo+0xb2/0x140 fs/file_table.c:233 [<000000007118092a>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<000000007118092a>] anon_inode_getfile+0xaa/0x120 fs/anon_inodes.c:74 [<000000002ae99012>] io_uring_get_fd fs/io_uring.c:9198 [inline] [<000000002ae99012>] io_uring_create fs/io_uring.c:9377 [inline] [<000000002ae99012>] io_uring_setup+0x1125/0x1630 fs/io_uring.c:9411 [<000000008280baad>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 [<00000000685d8cf0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: syzbot+71c4697e27c99fddcf17@syzkaller.appspotmail.com Fixes: 0f2122045b94 ("io_uring: don't rely on weak ->files references") Cc: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-08 23:54:26 +08:00
fd_install(fd, file);
return fd;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
err:
#if defined(CONFIG_UNIX)
sock_release(ctx->ring_sock);
ctx->ring_sock = NULL;
#endif
return ret;
}
static int io_uring_create(unsigned entries, struct io_uring_params *p,
struct io_uring_params __user *params)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
{
struct user_struct *user = NULL;
struct io_ring_ctx *ctx;
bool limit_mem;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
int ret;
if (!entries)
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return -EINVAL;
if (entries > IORING_MAX_ENTRIES) {
if (!(p->flags & IORING_SETUP_CLAMP))
return -EINVAL;
entries = IORING_MAX_ENTRIES;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
/*
* Use twice as many entries for the CQ ring. It's possible for the
* application to drive a higher depth than the size of the SQ ring,
* since the sqes are only used at submission time. This allows for
* some flexibility in overcommitting a bit. If the application has
* set IORING_SETUP_CQSIZE, it will have passed in the desired number
* of CQ ring entries manually.
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
*/
p->sq_entries = roundup_pow_of_two(entries);
if (p->flags & IORING_SETUP_CQSIZE) {
/*
* If IORING_SETUP_CQSIZE is set, we do the same roundup
* to a power-of-two, if it isn't already. We do NOT impose
* any cq vs sq ring sizing.
*/
io_uring: fix shift-out-of-bounds when round up cq size Abaci Fuzz reported a shift-out-of-bounds BUG in io_uring_create(): [ 59.598207] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 [ 59.599665] shift exponent 64 is too large for 64-bit type 'long unsigned int' [ 59.601230] CPU: 0 PID: 963 Comm: a.out Not tainted 5.10.0-rc4+ #3 [ 59.602502] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 59.603673] Call Trace: [ 59.604286] dump_stack+0x107/0x163 [ 59.605237] ubsan_epilogue+0xb/0x5a [ 59.606094] __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e [ 59.607335] ? lock_downgrade+0x6c0/0x6c0 [ 59.608182] ? rcu_read_lock_sched_held+0xaf/0xe0 [ 59.609166] io_uring_create.cold+0x99/0x149 [ 59.610114] io_uring_setup+0xd6/0x140 [ 59.610975] ? io_uring_create+0x2510/0x2510 [ 59.611945] ? lockdep_hardirqs_on_prepare+0x286/0x400 [ 59.613007] ? syscall_enter_from_user_mode+0x27/0x80 [ 59.614038] ? trace_hardirqs_on+0x5b/0x180 [ 59.615056] do_syscall_64+0x2d/0x40 [ 59.615940] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 59.617007] RIP: 0033:0x7f2bb8a0b239 This is caused by roundup_pow_of_two() if the input entries larger enough, e.g. 2^32-1. For sq_entries, it will check first and we allow at most IORING_MAX_ENTRIES, so it is okay. But for cq_entries, we do round up first, that may overflow and truncate it to 0, which is not the expected behavior. So check the cq size first and then do round up. Fixes: 88ec3211e463 ("io_uring: round-up cq size before comparing with rounded sq size") Reported-by: Abaci Fuzz <abaci@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-24 15:03:03 +08:00
if (!p->cq_entries)
return -EINVAL;
if (p->cq_entries > IORING_MAX_CQ_ENTRIES) {
if (!(p->flags & IORING_SETUP_CLAMP))
return -EINVAL;
p->cq_entries = IORING_MAX_CQ_ENTRIES;
}
io_uring: fix shift-out-of-bounds when round up cq size Abaci Fuzz reported a shift-out-of-bounds BUG in io_uring_create(): [ 59.598207] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 [ 59.599665] shift exponent 64 is too large for 64-bit type 'long unsigned int' [ 59.601230] CPU: 0 PID: 963 Comm: a.out Not tainted 5.10.0-rc4+ #3 [ 59.602502] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 59.603673] Call Trace: [ 59.604286] dump_stack+0x107/0x163 [ 59.605237] ubsan_epilogue+0xb/0x5a [ 59.606094] __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e [ 59.607335] ? lock_downgrade+0x6c0/0x6c0 [ 59.608182] ? rcu_read_lock_sched_held+0xaf/0xe0 [ 59.609166] io_uring_create.cold+0x99/0x149 [ 59.610114] io_uring_setup+0xd6/0x140 [ 59.610975] ? io_uring_create+0x2510/0x2510 [ 59.611945] ? lockdep_hardirqs_on_prepare+0x286/0x400 [ 59.613007] ? syscall_enter_from_user_mode+0x27/0x80 [ 59.614038] ? trace_hardirqs_on+0x5b/0x180 [ 59.615056] do_syscall_64+0x2d/0x40 [ 59.615940] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 59.617007] RIP: 0033:0x7f2bb8a0b239 This is caused by roundup_pow_of_two() if the input entries larger enough, e.g. 2^32-1. For sq_entries, it will check first and we allow at most IORING_MAX_ENTRIES, so it is okay. But for cq_entries, we do round up first, that may overflow and truncate it to 0, which is not the expected behavior. So check the cq size first and then do round up. Fixes: 88ec3211e463 ("io_uring: round-up cq size before comparing with rounded sq size") Reported-by: Abaci Fuzz <abaci@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-24 15:03:03 +08:00
p->cq_entries = roundup_pow_of_two(p->cq_entries);
if (p->cq_entries < p->sq_entries)
return -EINVAL;
} else {
p->cq_entries = 2 * p->sq_entries;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
user = get_uid(current_user());
limit_mem = !capable(CAP_IPC_LOCK);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
if (limit_mem) {
ret = __io_account_mem(user,
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
ring_pages(p->sq_entries, p->cq_entries));
if (ret) {
free_uid(user);
return ret;
}
}
ctx = io_ring_ctx_alloc(p);
if (!ctx) {
if (limit_mem)
__io_unaccount_mem(user, ring_pages(p->sq_entries,
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
p->cq_entries));
free_uid(user);
return -ENOMEM;
}
ctx->compat = in_compat_syscall();
ctx->user = user;
io_uring: use current task creds instead of allocating a new one syzbot reports: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9217 Comm: io_uring-sq Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:creds_are_invalid kernel/cred.c:792 [inline] RIP: 0010:__validate_creds include/linux/cred.h:187 [inline] RIP: 0010:override_creds+0x9f/0x170 kernel/cred.c:550 Code: ac 25 00 81 fb 64 65 73 43 0f 85 a3 37 00 00 e8 17 ab 25 00 49 8d 7c 24 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 96 00 00 00 41 8b 5c 24 10 bf RSP: 0018:ffff88809c45fda0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000043736564 RCX: ffffffff814f3318 RDX: 0000000000000002 RSI: ffffffff814f3329 RDI: 0000000000000010 RBP: ffff88809c45fdb8 R08: ffff8880a3aac240 R09: ffffed1014755849 R10: ffffed1014755848 R11: ffff8880a3aac247 R12: 0000000000000000 R13: ffff888098ab1600 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd51c40664 CR3: 0000000092641000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: io_sq_thread+0x1c7/0xa20 fs/io_uring.c:3274 kthread+0x361/0x430 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Modules linked in: ---[ end trace f2e1a4307fbe2245 ]--- RIP: 0010:creds_are_invalid kernel/cred.c:792 [inline] RIP: 0010:__validate_creds include/linux/cred.h:187 [inline] RIP: 0010:override_creds+0x9f/0x170 kernel/cred.c:550 Code: ac 25 00 81 fb 64 65 73 43 0f 85 a3 37 00 00 e8 17 ab 25 00 49 8d 7c 24 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 96 00 00 00 41 8b 5c 24 10 bf RSP: 0018:ffff88809c45fda0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000043736564 RCX: ffffffff814f3318 RDX: 0000000000000002 RSI: ffffffff814f3329 RDI: 0000000000000010 RBP: ffff88809c45fdb8 R08: ffff8880a3aac240 R09: ffffed1014755849 R10: ffffed1014755848 R11: ffff8880a3aac247 R12: 0000000000000000 R13: ffff888098ab1600 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd51c40664 CR3: 0000000092641000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 which is caused by slab fault injection triggering a failure in prepare_creds(). We don't actually need to create a copy of the creds as we're not modifying it, we just need a reference on the current task creds. This avoids the failure case as well, and propagates the const throughout the stack. Fixes: 181e448d8709 ("io_uring: async workers should inherit the user creds") Reported-by: syzbot+5320383e16029ba057ff@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-02 23:50:00 +08:00
ctx->creds = get_current_cred();
#ifdef CONFIG_AUDIT
ctx->loginuid = current->loginuid;
ctx->sessionid = current->sessionid;
#endif
ctx->sqo_task = get_task_struct(current);
/*
* This is just grabbed for accounting purposes. When a process exits,
* the mm is exited and dropped before the files, hence we need to hang
* on to this mm purely for the purposes of being able to unaccount
* memory (locked/pinned vm). It's not used for anything else.
*/
mmgrab(current->mm);
ctx->mm_account = current->mm;
#ifdef CONFIG_BLK_CGROUP
/*
* The sq thread will belong to the original cgroup it was inited in.
* If the cgroup goes offline (e.g. disabling the io controller), then
* issued bios will be associated with the closest cgroup later in the
* block layer.
*/
rcu_read_lock();
ctx->sqo_blkcg_css = blkcg_css();
ret = css_tryget_online(ctx->sqo_blkcg_css);
rcu_read_unlock();
if (!ret) {
/* don't init against a dying cgroup, have the user try again */
ctx->sqo_blkcg_css = NULL;
ret = -ENODEV;
goto err;
}
#endif
/*
* Account memory _before_ installing the file descriptor. Once
* the descriptor is installed, it can get closed at any time. Also
* do this before hitting the general error path, as ring freeing
* will un-account as well.
*/
io_account_mem(ctx, ring_pages(p->sq_entries, p->cq_entries),
ACCT_LOCKED);
ctx->limit_mem = limit_mem;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
ret = io_allocate_scq_urings(ctx, p);
if (ret)
goto err;
ret = io_sq_offload_create(ctx, p);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
if (ret)
goto err;
if (!(p->flags & IORING_SETUP_R_DISABLED))
io_sq_offload_start(ctx);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
memset(&p->sq_off, 0, sizeof(p->sq_off));
p->sq_off.head = offsetof(struct io_rings, sq.head);
p->sq_off.tail = offsetof(struct io_rings, sq.tail);
p->sq_off.ring_mask = offsetof(struct io_rings, sq_ring_mask);
p->sq_off.ring_entries = offsetof(struct io_rings, sq_ring_entries);
p->sq_off.flags = offsetof(struct io_rings, sq_flags);
p->sq_off.dropped = offsetof(struct io_rings, sq_dropped);
p->sq_off.array = (char *)ctx->sq_array - (char *)ctx->rings;
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
memset(&p->cq_off, 0, sizeof(p->cq_off));
p->cq_off.head = offsetof(struct io_rings, cq.head);
p->cq_off.tail = offsetof(struct io_rings, cq.tail);
p->cq_off.ring_mask = offsetof(struct io_rings, cq_ring_mask);
p->cq_off.ring_entries = offsetof(struct io_rings, cq_ring_entries);
p->cq_off.overflow = offsetof(struct io_rings, cq_overflow);
p->cq_off.cqes = offsetof(struct io_rings, cqes);
p->cq_off.flags = offsetof(struct io_rings, cq_flags);
p->features = IORING_FEAT_SINGLE_MMAP | IORING_FEAT_NODROP |
IORING_FEAT_SUBMIT_STABLE | IORING_FEAT_RW_CUR_POS |
IORING_FEAT_CUR_PERSONALITY | IORING_FEAT_FAST_POLL |
IORING_FEAT_POLL_32BITS | IORING_FEAT_SQPOLL_NONFIXED |
IORING_FEAT_EXT_ARG;
if (copy_to_user(params, p, sizeof(*p))) {
ret = -EFAULT;
goto err;
}
io_uring: don't touch 'ctx' after installing file descriptor As soon as we install the file descriptor, we have to assume that it can get arbitrarily closed. We currently account memory (and note that we did) after installing the ring fd, which means that it could be a potential use-after-free condition if the fd is closed right after being installed, but before we fiddle with the ctx. In fact, syzbot reported this exact scenario: BUG: KASAN: use-after-free in io_account_mem fs/io_uring.c:7397 [inline] BUG: KASAN: use-after-free in io_uring_create fs/io_uring.c:8369 [inline] BUG: KASAN: use-after-free in io_uring_setup+0x2797/0x2910 fs/io_uring.c:8400 Read of size 1 at addr ffff888087a41044 by task syz-executor.5/18145 CPU: 0 PID: 18145 Comm: syz-executor.5 Not tainted 5.8.0-rc7-next-20200729-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x18f/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 io_account_mem fs/io_uring.c:7397 [inline] io_uring_create fs/io_uring.c:8369 [inline] io_uring_setup+0x2797/0x2910 fs/io_uring.c:8400 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c429 Code: 8d b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8f121d0c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9 RAX: ffffffffffffffda RBX: 0000000000008540 RCX: 000000000045c429 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000196 RBP: 000000000078bf38 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000078bf0c R13: 00007fff86698cff R14: 00007f8f121d19c0 R15: 000000000078bf0c Move the accounting of the ring used locked memory before we get and install the ring file descriptor. Cc: stable@vger.kernel.org Reported-by: syzbot+9d46305e76057f30c74e@syzkaller.appspotmail.com Fixes: 309758254ea6 ("io_uring: report pinned memory usage") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-31 03:43:53 +08:00
/*
* Install ring fd as the very last thing, so we don't risk someone
* having closed it before we finish setup
*/
ret = io_uring_get_fd(ctx);
if (ret < 0)
goto err;
trace_io_uring_create(ret, ctx, p->sq_entries, p->cq_entries, p->flags);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return ret;
err:
io_ring_ctx_wait_and_kill(ctx);
return ret;
}
/*
* Sets up an aio uring context, and returns the fd. Applications asks for a
* ring size, we return the actual sq/cq ring sizes (among other things) in the
* params structure passed in.
*/
static long io_uring_setup(u32 entries, struct io_uring_params __user *params)
{
struct io_uring_params p;
int i;
if (copy_from_user(&p, params, sizeof(p)))
return -EFAULT;
for (i = 0; i < ARRAY_SIZE(p.resv); i++) {
if (p.resv[i])
return -EINVAL;
}
if (p.flags & ~(IORING_SETUP_IOPOLL | IORING_SETUP_SQPOLL |
IORING_SETUP_SQ_AFF | IORING_SETUP_CQSIZE |
IORING_SETUP_CLAMP | IORING_SETUP_ATTACH_WQ |
IORING_SETUP_R_DISABLED))
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
return -EINVAL;
return io_uring_create(entries, &p, params);
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
}
SYSCALL_DEFINE2(io_uring_setup, u32, entries,
struct io_uring_params __user *, params)
{
return io_uring_setup(entries, params);
}
static int io_probe(struct io_ring_ctx *ctx, void __user *arg, unsigned nr_args)
{
struct io_uring_probe *p;
size_t size;
int i, ret;
size = struct_size(p, ops, nr_args);
if (size == SIZE_MAX)
return -EOVERFLOW;
p = kzalloc(size, GFP_KERNEL);
if (!p)
return -ENOMEM;
ret = -EFAULT;
if (copy_from_user(p, arg, size))
goto out;
ret = -EINVAL;
if (memchr_inv(p, 0, size))
goto out;
p->last_op = IORING_OP_LAST - 1;
if (nr_args > IORING_OP_LAST)
nr_args = IORING_OP_LAST;
for (i = 0; i < nr_args; i++) {
p->ops[i].op = i;
if (!io_op_defs[i].not_supported)
p->ops[i].flags = IO_URING_OP_SUPPORTED;
}
p->ops_len = i;
ret = 0;
if (copy_to_user(arg, p, size))
ret = -EFAULT;
out:
kfree(p);
return ret;
}
static int io_register_personality(struct io_ring_ctx *ctx)
{
struct io_identity *id;
int ret;
id = kmalloc(sizeof(*id), GFP_KERNEL);
if (unlikely(!id))
return -ENOMEM;
io_init_identity(id);
id->creds = get_current_cred();
ret = idr_alloc_cyclic(&ctx->personality_idr, id, 1, USHRT_MAX, GFP_KERNEL);
if (ret < 0) {
put_cred(id->creds);
kfree(id);
}
return ret;
}
static int io_unregister_personality(struct io_ring_ctx *ctx, unsigned id)
{
struct io_identity *iod;
iod = idr_remove(&ctx->personality_idr, id);
if (iod) {
put_cred(iod->creds);
if (refcount_dec_and_test(&iod->count))
kfree(iod);
return 0;
}
return -EINVAL;
}
static int io_register_restrictions(struct io_ring_ctx *ctx, void __user *arg,
unsigned int nr_args)
{
struct io_uring_restriction *res;
size_t size;
int i, ret;
/* Restrictions allowed only if rings started disabled */
if (!(ctx->flags & IORING_SETUP_R_DISABLED))
return -EBADFD;
/* We allow only a single restrictions registration */
if (ctx->restrictions.registered)
return -EBUSY;
if (!arg || nr_args > IORING_MAX_RESTRICTIONS)
return -EINVAL;
size = array_size(nr_args, sizeof(*res));
if (size == SIZE_MAX)
return -EOVERFLOW;
res = memdup_user(arg, size);
if (IS_ERR(res))
return PTR_ERR(res);
ret = 0;
for (i = 0; i < nr_args; i++) {
switch (res[i].opcode) {
case IORING_RESTRICTION_REGISTER_OP:
if (res[i].register_op >= IORING_REGISTER_LAST) {
ret = -EINVAL;
goto out;
}
__set_bit(res[i].register_op,
ctx->restrictions.register_op);
break;
case IORING_RESTRICTION_SQE_OP:
if (res[i].sqe_op >= IORING_OP_LAST) {
ret = -EINVAL;
goto out;
}
__set_bit(res[i].sqe_op, ctx->restrictions.sqe_op);
break;
case IORING_RESTRICTION_SQE_FLAGS_ALLOWED:
ctx->restrictions.sqe_flags_allowed = res[i].sqe_flags;
break;
case IORING_RESTRICTION_SQE_FLAGS_REQUIRED:
ctx->restrictions.sqe_flags_required = res[i].sqe_flags;
break;
default:
ret = -EINVAL;
goto out;
}
}
out:
/* Reset all restrictions if an error happened */
if (ret != 0)
memset(&ctx->restrictions, 0, sizeof(ctx->restrictions));
else
ctx->restrictions.registered = true;
kfree(res);
return ret;
}
static int io_register_enable_rings(struct io_ring_ctx *ctx)
{
if (!(ctx->flags & IORING_SETUP_R_DISABLED))
return -EBADFD;
if (ctx->restrictions.registered)
ctx->restricted = 1;
ctx->flags &= ~IORING_SETUP_R_DISABLED;
io_sq_offload_start(ctx);
return 0;
}
static bool io_register_op_must_quiesce(int op)
{
switch (op) {
case IORING_UNREGISTER_FILES:
case IORING_REGISTER_FILES_UPDATE:
case IORING_REGISTER_PROBE:
case IORING_REGISTER_PERSONALITY:
case IORING_UNREGISTER_PERSONALITY:
return false;
default:
return true;
}
}
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
static int __io_uring_register(struct io_ring_ctx *ctx, unsigned opcode,
void __user *arg, unsigned nr_args)
__releases(ctx->uring_lock)
__acquires(ctx->uring_lock)
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
{
int ret;
/*
* We're inside the ring mutex, if the ref is already dying, then
* someone else killed the ctx or is already going through
* io_uring_register().
*/
if (percpu_ref_is_dying(&ctx->refs))
return -ENXIO;
if (io_register_op_must_quiesce(opcode)) {
percpu_ref_kill(&ctx->refs);
/*
* Drop uring mutex before waiting for references to exit. If
* another thread is currently inside io_uring_enter() it might
* need to grab the uring_lock to make progress. If we hold it
* here across the drain wait, then we can deadlock. It's safe
* to drop the mutex here, since no new references will come in
* after we've killed the percpu ref.
*/
mutex_unlock(&ctx->uring_lock);
do {
ret = wait_for_completion_interruptible(&ctx->ref_comp);
if (!ret)
break;
ret = io_run_task_work_sig();
if (ret < 0)
break;
} while (1);
mutex_lock(&ctx->uring_lock);
if (ret) {
percpu_ref_resurrect(&ctx->refs);
goto out_quiesce;
}
}
if (ctx->restricted) {
if (opcode >= IORING_REGISTER_LAST) {
ret = -EINVAL;
goto out;
}
if (!test_bit(opcode, ctx->restrictions.register_op)) {
ret = -EACCES;
goto out;
}
}
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
switch (opcode) {
case IORING_REGISTER_BUFFERS:
ret = io_sqe_buffer_register(ctx, arg, nr_args);
break;
case IORING_UNREGISTER_BUFFERS:
ret = -EINVAL;
if (arg || nr_args)
break;
ret = io_sqe_buffer_unregister(ctx);
break;
case IORING_REGISTER_FILES:
ret = io_sqe_files_register(ctx, arg, nr_args);
break;
case IORING_UNREGISTER_FILES:
ret = -EINVAL;
if (arg || nr_args)
break;
ret = io_sqe_files_unregister(ctx);
break;
case IORING_REGISTER_FILES_UPDATE:
ret = io_sqe_files_update(ctx, arg, nr_args);
break;
case IORING_REGISTER_EVENTFD:
case IORING_REGISTER_EVENTFD_ASYNC:
ret = -EINVAL;
if (nr_args != 1)
break;
ret = io_eventfd_register(ctx, arg);
if (ret)
break;
if (opcode == IORING_REGISTER_EVENTFD_ASYNC)
ctx->eventfd_async = 1;
else
ctx->eventfd_async = 0;
break;
case IORING_UNREGISTER_EVENTFD:
ret = -EINVAL;
if (arg || nr_args)
break;
ret = io_eventfd_unregister(ctx);
break;
case IORING_REGISTER_PROBE:
ret = -EINVAL;
if (!arg || nr_args > 256)
break;
ret = io_probe(ctx, arg, nr_args);
break;
case IORING_REGISTER_PERSONALITY:
ret = -EINVAL;
if (arg || nr_args)
break;
ret = io_register_personality(ctx);
break;
case IORING_UNREGISTER_PERSONALITY:
ret = -EINVAL;
if (arg)
break;
ret = io_unregister_personality(ctx, nr_args);
break;
case IORING_REGISTER_ENABLE_RINGS:
ret = -EINVAL;
if (arg || nr_args)
break;
ret = io_register_enable_rings(ctx);
break;
case IORING_REGISTER_RESTRICTIONS:
ret = io_register_restrictions(ctx, arg, nr_args);
break;
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
default:
ret = -EINVAL;
break;
}
out:
if (io_register_op_must_quiesce(opcode)) {
/* bring the ctx back to life */
percpu_ref_reinit(&ctx->refs);
out_quiesce:
reinit_completion(&ctx->ref_comp);
}
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
return ret;
}
SYSCALL_DEFINE4(io_uring_register, unsigned int, fd, unsigned int, opcode,
void __user *, arg, unsigned int, nr_args)
{
struct io_ring_ctx *ctx;
long ret = -EBADF;
struct fd f;
f = fdget(fd);
if (!f.file)
return -EBADF;
ret = -EOPNOTSUPP;
if (f.file->f_op != &io_uring_fops)
goto out_fput;
ctx = f.file->private_data;
mutex_lock(&ctx->uring_lock);
ret = __io_uring_register(ctx, opcode, arg, nr_args);
mutex_unlock(&ctx->uring_lock);
trace_io_uring_register(ctx, opcode, ctx->nr_user_files, ctx->nr_user_bufs,
ctx->cq_ev_fd != NULL, ret);
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 00:16:05 +08:00
out_fput:
fdput(f);
return ret;
}
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
static int __init io_uring_init(void)
{
#define __BUILD_BUG_VERIFY_ELEMENT(stype, eoffset, etype, ename) do { \
BUILD_BUG_ON(offsetof(stype, ename) != eoffset); \
BUILD_BUG_ON(sizeof(etype) != sizeof_field(stype, ename)); \
} while (0)
#define BUILD_BUG_SQE_ELEM(eoffset, etype, ename) \
__BUILD_BUG_VERIFY_ELEMENT(struct io_uring_sqe, eoffset, etype, ename)
BUILD_BUG_ON(sizeof(struct io_uring_sqe) != 64);
BUILD_BUG_SQE_ELEM(0, __u8, opcode);
BUILD_BUG_SQE_ELEM(1, __u8, flags);
BUILD_BUG_SQE_ELEM(2, __u16, ioprio);
BUILD_BUG_SQE_ELEM(4, __s32, fd);
BUILD_BUG_SQE_ELEM(8, __u64, off);
BUILD_BUG_SQE_ELEM(8, __u64, addr2);
BUILD_BUG_SQE_ELEM(16, __u64, addr);
BUILD_BUG_SQE_ELEM(16, __u64, splice_off_in);
BUILD_BUG_SQE_ELEM(24, __u32, len);
BUILD_BUG_SQE_ELEM(28, __kernel_rwf_t, rw_flags);
BUILD_BUG_SQE_ELEM(28, /* compat */ int, rw_flags);
BUILD_BUG_SQE_ELEM(28, /* compat */ __u32, rw_flags);
BUILD_BUG_SQE_ELEM(28, __u32, fsync_flags);
BUILD_BUG_SQE_ELEM(28, /* compat */ __u16, poll_events);
BUILD_BUG_SQE_ELEM(28, __u32, poll32_events);
BUILD_BUG_SQE_ELEM(28, __u32, sync_range_flags);
BUILD_BUG_SQE_ELEM(28, __u32, msg_flags);
BUILD_BUG_SQE_ELEM(28, __u32, timeout_flags);
BUILD_BUG_SQE_ELEM(28, __u32, accept_flags);
BUILD_BUG_SQE_ELEM(28, __u32, cancel_flags);
BUILD_BUG_SQE_ELEM(28, __u32, open_flags);
BUILD_BUG_SQE_ELEM(28, __u32, statx_flags);
BUILD_BUG_SQE_ELEM(28, __u32, fadvise_advice);
BUILD_BUG_SQE_ELEM(28, __u32, splice_flags);
BUILD_BUG_SQE_ELEM(32, __u64, user_data);
BUILD_BUG_SQE_ELEM(40, __u16, buf_index);
BUILD_BUG_SQE_ELEM(42, __u16, personality);
BUILD_BUG_SQE_ELEM(44, __s32, splice_fd_in);
BUILD_BUG_ON(ARRAY_SIZE(io_op_defs) != IORING_OP_LAST);
BUILD_BUG_ON(__REQ_F_LAST_BIT >= 8 * sizeof(int));
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08 01:46:33 +08:00
req_cachep = KMEM_CACHE(io_kiocb, SLAB_HWCACHE_ALIGN | SLAB_PANIC);
return 0;
};
__initcall(io_uring_init);