2005-08-10 11:21:49 +08:00
|
|
|
netfilter-objs := core.o nf_log.o nf_queue.o nf_sockopt.o
|
2006-11-29 09:35:01 +08:00
|
|
|
|
netfilter: accounting rework: ct_extend + 64bit counters (v4)
Initially netfilter has had 64bit counters for conntrack-based accounting, but
it was changed in 2.6.14 to save memory. Unfortunately in-kernel 64bit counters are
still required, for example for "connbytes" extension. However, 64bit counters
waste a lot of memory and it was not possible to enable/disable it runtime.
This patch:
- reimplements accounting with respect to the extension infrastructure,
- makes one global version of seq_print_acct() instead of two seq_print_counters(),
- makes it possible to enable it at boot time (for CONFIG_SYSCTL/CONFIG_SYSFS=n),
- makes it possible to enable/disable it at runtime by sysctl or sysfs,
- extends counters from 32bit to 64bit,
- renames ip_conntrack_counter -> nf_conn_counter,
- enables accounting code unconditionally (no longer depends on CONFIG_NF_CT_ACCT),
- set initial accounting enable state based on CONFIG_NF_CT_ACCT
- removes buggy IPCT_COUNTER_FILLING event handling.
If accounting is enabled newly created connections get additional acct extend.
Old connections are not changed as it is not possible to add a ct_extend area
to confirmed conntrack. Accounting is performed for all connections with
acct extend regardless of a current state of "net.netfilter.nf_conntrack_acct".
Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22 01:01:34 +08:00
|
|
|
nf_conntrack-y := nf_conntrack_core.o nf_conntrack_standalone.o nf_conntrack_expect.o nf_conntrack_helper.o nf_conntrack_proto.o nf_conntrack_l3proto_generic.o nf_conntrack_proto_generic.o nf_conntrack_proto_tcp.o nf_conntrack_proto_udp.o nf_conntrack_extend.o nf_conntrack_acct.o
|
2011-01-19 23:00:07 +08:00
|
|
|
nf_conntrack-$(CONFIG_NF_CONNTRACK_TIMESTAMP) += nf_conntrack_timestamp.o
|
2006-11-29 09:35:01 +08:00
|
|
|
nf_conntrack-$(CONFIG_NF_CONNTRACK_EVENTS) += nf_conntrack_ecache.o
|
2005-08-10 11:21:49 +08:00
|
|
|
|
|
|
|
obj-$(CONFIG_NETFILTER) = netfilter.o
|
|
|
|
|
2005-08-10 10:30:24 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_NETLINK) += nfnetlink.o
|
netfilter: add extended accounting infrastructure over nfnetlink
We currently have two ways to account traffic in netfilter:
- iptables chain and rule counters:
# iptables -L -n -v
Chain INPUT (policy DROP 3 packets, 867 bytes)
pkts bytes target prot opt in out source destination
8 1104 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0
- use flow-based accounting provided by ctnetlink:
# conntrack -L
tcp 6 431999 ESTABLISHED src=192.168.1.130 dst=212.106.219.168 sport=58152 dport=80 packets=47 bytes=7654 src=212.106.219.168 dst=192.168.1.130 sport=80 dport=58152 packets=49 bytes=66340 [ASSURED] mark=0 use=1
While trying to display real-time accounting statistics, we require
to pool the kernel periodically to obtain this information. This is
OK if the number of flows is relatively low. However, in case that
the number of flows is huge, we can spend a considerable amount of
cycles to iterate over the list of flows that have been obtained.
Moreover, if we want to obtain the sum of the flow accounting results
that match some criteria, we have to iterate over the whole list of
existing flows, look for matchings and update the counters.
This patch adds the extended accounting infrastructure for
nfnetlink which aims to allow displaying real-time traffic accounting
without the need of complicated and resource-consuming implementation
in user-space. Basically, this new infrastructure allows you to create
accounting objects. One accounting object is composed of packet and
byte counters.
In order to manipulate create accounting objects, you require the
new libnetfilter_acct library. It contains several examples of use:
libnetfilter_acct/examples# ./nfacct-add http-traffic
libnetfilter_acct/examples# ./nfacct-get
http-traffic = { pkts = 000000000000, bytes = 000000000000 };
Then, you can use one of this accounting objects in several iptables
rules using the new nfacct match (which comes in a follow-up patch):
# iptables -I INPUT -p tcp --sport 80 -m nfacct --nfacct-name http-traffic
# iptables -I OUTPUT -p tcp --dport 80 -m nfacct --nfacct-name http-traffic
The idea is simple: if one packet matches the rule, the nfacct match
updates the counters.
Thanks to Patrick McHardy, Eric Dumazet, Changli Gao for reviewing and
providing feedback for this contribution.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-12-23 21:19:50 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_NETLINK_ACCT) += nfnetlink_acct.o
|
2005-08-10 10:44:15 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_NETLINK_QUEUE) += nfnetlink_queue.o
|
2005-08-10 10:58:39 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_NETLINK_LOG) += nfnetlink_log.o
|
[NETFILTER]: Add nf_conntrack subsystem.
The existing connection tracking subsystem in netfilter can only
handle ipv4. There were basically two choices present to add
connection tracking support for ipv6. We could either duplicate all
of the ipv4 connection tracking code into an ipv6 counterpart, or (the
choice taken by these patches) we could design a generic layer that
could handle both ipv4 and ipv6 and thus requiring only one sub-protocol
(TCP, UDP, etc.) connection tracking helper module to be written.
In fact nf_conntrack is capable of working with any layer 3
protocol.
The existing ipv4 specific conntrack code could also not deal
with the pecularities of doing connection tracking on ipv6,
which is also cured here. For example, these issues include:
1) ICMPv6 handling, which is used for neighbour discovery in
ipv6 thus some messages such as these should not participate
in connection tracking since effectively they are like ARP
messages
2) fragmentation must be handled differently in ipv6, because
the simplistic "defrag, connection track and NAT, refrag"
(which the existing ipv4 connection tracking does) approach simply
isn't feasible in ipv6
3) ipv6 extension header parsing must occur at the correct spots
before and after connection tracking decisions, and there were
no provisions for this in the existing connection tracking
design
4) ipv6 has no need for stateful NAT
The ipv4 specific conntrack layer is kept around, until all of
the ipv4 specific conntrack helpers are ported over to nf_conntrack
and it is feature complete. Once that occurs, the old conntrack
stuff will get placed into the feature-removal-schedule and we will
fully kill it off 6 months later.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-10 08:38:16 +08:00
|
|
|
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
# connection tracking
|
[NETFILTER]: Add nf_conntrack subsystem.
The existing connection tracking subsystem in netfilter can only
handle ipv4. There were basically two choices present to add
connection tracking support for ipv6. We could either duplicate all
of the ipv4 connection tracking code into an ipv6 counterpart, or (the
choice taken by these patches) we could design a generic layer that
could handle both ipv4 and ipv6 and thus requiring only one sub-protocol
(TCP, UDP, etc.) connection tracking helper module to be written.
In fact nf_conntrack is capable of working with any layer 3
protocol.
The existing ipv4 specific conntrack code could also not deal
with the pecularities of doing connection tracking on ipv6,
which is also cured here. For example, these issues include:
1) ICMPv6 handling, which is used for neighbour discovery in
ipv6 thus some messages such as these should not participate
in connection tracking since effectively they are like ARP
messages
2) fragmentation must be handled differently in ipv6, because
the simplistic "defrag, connection track and NAT, refrag"
(which the existing ipv4 connection tracking does) approach simply
isn't feasible in ipv6
3) ipv6 extension header parsing must occur at the correct spots
before and after connection tracking decisions, and there were
no provisions for this in the existing connection tracking
design
4) ipv6 has no need for stateful NAT
The ipv4 specific conntrack layer is kept around, until all of
the ipv4 specific conntrack helpers are ported over to nf_conntrack
and it is feature complete. Once that occurs, the old conntrack
stuff will get placed into the feature-removal-schedule and we will
fully kill it off 6 months later.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-10 08:38:16 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK) += nf_conntrack.o
|
|
|
|
|
|
|
|
# SCTP protocol connection tracking
|
2008-03-20 22:15:55 +08:00
|
|
|
obj-$(CONFIG_NF_CT_PROTO_DCCP) += nf_conntrack_proto_dccp.o
|
2006-12-03 14:09:41 +08:00
|
|
|
obj-$(CONFIG_NF_CT_PROTO_GRE) += nf_conntrack_proto_gre.o
|
[NETFILTER]: Add nf_conntrack subsystem.
The existing connection tracking subsystem in netfilter can only
handle ipv4. There were basically two choices present to add
connection tracking support for ipv6. We could either duplicate all
of the ipv4 connection tracking code into an ipv6 counterpart, or (the
choice taken by these patches) we could design a generic layer that
could handle both ipv4 and ipv6 and thus requiring only one sub-protocol
(TCP, UDP, etc.) connection tracking helper module to be written.
In fact nf_conntrack is capable of working with any layer 3
protocol.
The existing ipv4 specific conntrack code could also not deal
with the pecularities of doing connection tracking on ipv6,
which is also cured here. For example, these issues include:
1) ICMPv6 handling, which is used for neighbour discovery in
ipv6 thus some messages such as these should not participate
in connection tracking since effectively they are like ARP
messages
2) fragmentation must be handled differently in ipv6, because
the simplistic "defrag, connection track and NAT, refrag"
(which the existing ipv4 connection tracking does) approach simply
isn't feasible in ipv6
3) ipv6 extension header parsing must occur at the correct spots
before and after connection tracking decisions, and there were
no provisions for this in the existing connection tracking
design
4) ipv6 has no need for stateful NAT
The ipv4 specific conntrack layer is kept around, until all of
the ipv4 specific conntrack helpers are ported over to nf_conntrack
and it is feature complete. Once that occurs, the old conntrack
stuff will get placed into the feature-removal-schedule and we will
fully kill it off 6 months later.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-10 08:38:16 +08:00
|
|
|
obj-$(CONFIG_NF_CT_PROTO_SCTP) += nf_conntrack_proto_sctp.o
|
2007-07-15 11:48:44 +08:00
|
|
|
obj-$(CONFIG_NF_CT_PROTO_UDPLITE) += nf_conntrack_proto_udplite.o
|
2006-01-06 04:19:05 +08:00
|
|
|
|
|
|
|
# netlink interface for nf_conntrack
|
|
|
|
obj-$(CONFIG_NF_CT_NETLINK) += nf_conntrack_netlink.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
|
|
|
|
# connection tracking helpers
|
2006-12-03 14:08:46 +08:00
|
|
|
nf_conntrack_h323-objs := nf_conntrack_h323_main.o nf_conntrack_h323_asn1.o
|
|
|
|
|
2006-12-03 14:08:26 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_AMANDA) += nf_conntrack_amanda.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_FTP) += nf_conntrack_ftp.o
|
2006-12-03 14:08:46 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_H323) += nf_conntrack_h323.o
|
2006-12-03 14:09:06 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_IRC) += nf_conntrack_irc.o
|
2011-01-19 01:12:24 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_BROADCAST) += nf_conntrack_broadcast.o
|
2006-12-03 14:09:24 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_NETBIOS_NS) += nf_conntrack_netbios_ns.o
|
2011-01-19 01:12:24 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_SNMP) += nf_conntrack_snmp.o
|
2006-12-03 14:09:41 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_conntrack_pptp.o
|
2007-02-08 07:05:12 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
|
2006-12-03 14:09:57 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
|
2006-12-03 14:10:18 +08:00
|
|
|
obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
|
2008-10-08 17:35:12 +08:00
|
|
|
# transparent proxy support
|
|
|
|
obj-$(CONFIG_NETFILTER_TPROXY) += nf_tproxy_core.o
|
|
|
|
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
# generic X tables
|
|
|
|
obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o
|
|
|
|
|
2009-02-28 10:23:57 +08:00
|
|
|
# combos
|
|
|
|
obj-$(CONFIG_NETFILTER_XT_MARK) += xt_mark.o
|
2010-02-26 21:20:32 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_CONNMARK) += xt_connmark.o
|
2011-02-01 22:56:00 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_SET) += xt_set.o
|
2009-02-28 10:23:57 +08:00
|
|
|
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
# targets
|
2011-01-17 01:10:28 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_AUDIT) += xt_AUDIT.o
|
2010-07-15 23:20:46 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_CHECKSUM) += xt_CHECKSUM.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIFY) += xt_CLASSIFY.o
|
2007-11-06 12:42:54 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
|
2010-02-04 00:17:06 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
|
2006-08-22 15:30:26 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
|
2009-02-19 01:38:40 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
|
2009-02-20 17:55:14 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
|
2006-11-29 09:35:38 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
|
2007-11-06 12:42:54 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_NOTRACK) += xt_NOTRACK.o
|
2007-12-05 15:40:05 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_RATEEST) += xt_RATEEST.o
|
2006-06-09 15:30:57 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK) += xt_SECMARK.o
|
2008-10-08 17:35:12 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_TPROXY) += xt_TPROXY.o
|
2007-02-08 07:09:46 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_TCPMSS) += xt_TCPMSS.o
|
2007-12-05 15:21:50 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP) += xt_TCPOPTSTRIP.o
|
2010-04-19 20:17:47 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_TEE) += xt_TEE.o
|
2007-11-06 12:42:54 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o
|
2010-06-15 21:04:00 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_TARGET_IDLETIMER) += xt_IDLETIMER.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
|
|
|
|
# matches
|
2011-03-16 03:16:20 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_ADDRTYPE) += xt_addrtype.o
|
2009-03-17 00:10:36 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_CLUSTER) += xt_cluster.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_COMMENT) += xt_comment.o
|
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_CONNBYTES) += xt_connbytes.o
|
2007-07-15 11:47:26 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_CONNLIMIT) += xt_connlimit.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_CONNTRACK) += xt_conntrack.o
|
2010-07-23 18:59:36 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_CPU) += xt_cpu.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_DCCP) += xt_dccp.o
|
2011-02-03 07:05:43 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_DEVGROUP) += xt_devgroup.o
|
2006-08-22 15:29:37 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_DSCP) += xt_dscp.o
|
2006-04-01 18:22:30 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_ESP) += xt_esp.o
|
2007-11-06 12:42:54 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_HASHLIMIT) += xt_hashlimit.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_HELPER) += xt_helper.o
|
2009-02-19 01:39:31 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_HL) += xt_hl.o
|
2008-01-15 15:42:47 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_IPRANGE) += xt_iprange.o
|
2010-07-23 18:42:58 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_IPVS) += xt_ipvs.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_LENGTH) += xt_length.o
|
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_LIMIT) += xt_limit.o
|
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_MAC) += xt_mac.o
|
2006-04-01 18:22:54 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_MULTIPORT) += xt_multiport.o
|
2009-06-08 23:01:51 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_OSF) += xt_osf.o
|
2007-12-05 15:27:38 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_OWNER) += xt_owner.o
|
2007-11-06 12:42:54 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_PKTTYPE) += xt_pkttype.o
|
2007-11-06 12:42:54 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_POLICY) += xt_policy.o
|
2006-05-30 09:20:32 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_QUOTA) += xt_quota.o
|
2007-12-04 20:02:19 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_RATEEST) += xt_rateest.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o
|
2008-10-08 17:35:00 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT) += xt_recent.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
|
2008-10-08 17:35:12 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
|
2006-05-30 09:21:00 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
|
[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables
This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.
o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers
Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 05:30:04 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
|
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
|
2007-11-06 12:42:54 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_TIME) += xt_time.o
|
2007-07-08 13:20:36 +08:00
|
|
|
obj-$(CONFIG_NETFILTER_XT_MATCH_U32) += xt_u32.o
|
2008-09-19 18:32:57 +08:00
|
|
|
|
netfilter: ipset: IP set core support
The patch adds the IP set core support to the kernel.
The IP set core implements a netlink (nfnetlink) based protocol by which
one can create, destroy, flush, rename, swap, list, save, restore sets,
and add, delete, test elements from userspace. For simplicity (and backward
compatibilty and for not to force ip(6)tables to be linked with a netlink
library) reasons a small getsockopt-based protocol is also kept in order
to communicate with the ip(6)tables match and target.
The netlink protocol passes all u16, etc values in network order with
NLA_F_NET_BYTEORDER flag. The protocol enforces the proper use of the
NLA_F_NESTED and NLA_F_NET_BYTEORDER flags.
For other kernel subsystems (netfilter match and target) the API contains
the functions to add, delete and test elements in sets and the required calls
to get/put refereces to the sets before those operations can be performed.
The set types (which are implemented in independent modules) are stored
in a simple RCU protected list. A set type may have variants: for example
without timeout or with timeout support, for IPv4 or for IPv6. The sets
(i.e. the pointers to the sets) are stored in an array. The sets are
identified by their index in the array, which makes possible easy and
fast swapping of sets. The array is protected indirectly by the nfnl
mutex from nfnetlink. The content of the sets are protected by the rwlock
of the set.
There are functional differences between the add/del/test functions
for the kernel and userspace:
- kernel add/del/test: works on the current packet (i.e. one element)
- kernel test: may trigger an "add" operation in order to fill
out unspecified parts of the element from the packet (like MAC address)
- userspace add/del: works on the netlink message and thus possibly
on multiple elements from the IPSET_ATTR_ADT container attribute.
- userspace add: may trigger resizing of a set
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-02-01 22:28:35 +08:00
|
|
|
# ipset
|
|
|
|
obj-$(CONFIG_IP_SET) += ipset/
|
|
|
|
|
2008-09-19 18:32:57 +08:00
|
|
|
# IPVS
|
|
|
|
obj-$(CONFIG_IP_VS) += ipvs/
|