mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 04:34:11 +08:00
59 lines
2.6 KiB
Plaintext
59 lines
2.6 KiB
Plaintext
|
This is the README for the Gracilis Packetwin device driver, version 0.5
|
||
|
|
ALPHA for Linux 1.3.43.
|
||
|
|
|
||
|
|
These files will allow you to talk to the PackeTwin (now know as PT) and
|
||
|
|
connect through it just like a pair of TNCs. To do this you will also
|
||
|
|
require the AX.25 code in the kernel enabled.
|
||
|
|
|
||
|
|
There are four files in this archive; this readme, a patch file, a .c file
|
||
|
|
and finally a .h file. The two program files need to be put into the
|
||
|
|
drivers/net directory in the Linux source tree, for me this is the
|
||
|
|
directory /usr/src/linux/drivers/net. The patch file needs to be patched in
|
||
|
|
at the top of the Linux source tree (/usr/src/linux in my case).
|
||
|
|
|
||
|
|
You will most probably have to edit the pt.c file to suit your own setup,
|
||
|
|
this should just involve changing some of the defines at the top of the file.
|
||
|
|
Please note that if you run an external modem you must specify a speed of 0.
|
||
|
|
|
||
|
|
The program is currently setup to run a 4800 baud external modem on port A
|
||
|
|
and a Kantronics DE-9600 daughter board on port B so if you have this (or
|
||
|
|
something similar) then you're right.
|
||
|
|
|
||
|
|
To compile in the driver, put the files in the correct place and patch in
|
||
|
|
the diff. You will have to re-configure the kernel again before you
|
||
|
|
recompile it.
|
||
|
|
|
||
|
|
The driver is not real good at the moment for finding the card. You can
|
||
|
|
'help' it by changing the order of the potential addresses in the structure
|
||
|
|
found in the pt_init() function so the address of where the card is is put
|
||
|
|
first.
|
||
|
|
|
||
|
|
After compiling, you have to get them going, they are pretty well like any
|
||
|
|
other net device and just need ifconfig to get them going.
|
||
|
|
As an example, here is my /etc/rc.net
|
||
|
|
--------------------------
|
||
|
|
|
||
|
|
#
|
||
|
|
# Configure the PackeTwin, port A.
|
||
|
|
/sbin/ifconfig pt0a 44.136.8.87 hw ax25 vk2xlz mtu 512
|
||
|
|
/sbin/ifconfig pt0a 44.136.8.87 broadcast 44.136.8.255 netmask 255.255.255.0
|
||
|
|
/sbin/route add -net 44.136.8.0 netmask 255.255.255.0 dev pt0a
|
||
|
|
/sbin/route add -net 44.0.0.0 netmask 255.0.0.0 gw 44.136.8.68 dev pt0a
|
||
|
|
/sbin/route add -net 138.25.16.0 netmask 255.255.240.0 dev pt0a
|
||
|
|
/sbin/route add -host 44.136.8.255 dev pt0a
|
||
|
|
#
|
||
|
|
# Configure the PackeTwin, port B.
|
||
|
|
/sbin/ifconfig pt0b 44.136.8.87 hw ax25 vk2xlz-1 mtu 512
|
||
|
|
/sbin/ifconfig pt0b 44.136.8.87 broadcast 44.255.255.255 netmask 255.0.0.0
|
||
|
|
/sbin/route add -host 44.136.8.216 dev pt0b
|
||
|
|
/sbin/route add -host 44.136.8.95 dev pt0b
|
||
|
|
/sbin/route add -host 44.255.255.255 dev pt0b
|
||
|
|
|
||
|
|
This version of the driver comes under the GNU GPL. If you have one of my
|
||
|
|
previous (non-GPL) versions of the driver, please update to this one.
|
||
|
|
|
||
|
|
I hope that this all works well for you. I would be pleased to hear how
|
||
|
|
many people use the driver and if it does its job.
|
||
|
|
|
||
|
|
- Craig vk2xlz <csmall@small.dropbear.id.au>
|