2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
linux-next/samples/bpf/map_perf_test_kern.c

292 lines
6.5 KiB
C
Raw Normal View History

/* Copyright (c) 2016 Facebook
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*/
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/version.h>
#include <uapi/linux/bpf.h>
#include <bpf/bpf_helpers.h>
#include <bpf/bpf_tracing.h>
samples: bpf: Fix bpf programs with kprobe/sys_connect event Currently, BPF programs with kprobe/sys_connect does not work properly. Commit 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64") This commit modifies the bpf_load behavior of kprobe events in the x64 architecture. If the current kprobe event target starts with "sys_*", add the prefix "__x64_" to the front of the event. Appending "__x64_" prefix with kprobe/sys_* event was appropriate as a solution to most of the problems caused by the commit below. commit d5a00528b58c ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()") However, there is a problem with the sys_connect kprobe event that does not work properly. For __sys_connect event, parameters can be fetched normally, but for __x64_sys_connect, parameters cannot be fetched. ffffffff818d3520 <__x64_sys_connect>: ffffffff818d3520: e8 fb df 32 00 callq 0xffffffff81c01520 <__fentry__> ffffffff818d3525: 48 8b 57 60 movq 96(%rdi), %rdx ffffffff818d3529: 48 8b 77 68 movq 104(%rdi), %rsi ffffffff818d352d: 48 8b 7f 70 movq 112(%rdi), %rdi ffffffff818d3531: e8 1a ff ff ff callq 0xffffffff818d3450 <__sys_connect> ffffffff818d3536: 48 98 cltq ffffffff818d3538: c3 retq ffffffff818d3539: 0f 1f 80 00 00 00 00 nopl (%rax) As the assembly code for __x64_sys_connect shows, parameters should be fetched and set into rdi, rsi, rdx registers prior to calling __sys_connect. Because of this problem, this commit fixes the sys_connect event by first getting the value of the rdi register and then the value of the rdi, rsi, and rdx register through an offset based on that value. Fixes: 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200707184855.30968-2-danieltimlee@gmail.com
2020-07-08 02:48:52 +08:00
#include <bpf/bpf_core_read.h>
#include "trace_common.h"
#define MAX_ENTRIES 1000
#define MAX_NR_CPUS 1024
struct {
__uint(type, BPF_MAP_TYPE_HASH);
__type(key, u32);
__type(value, long);
__uint(max_entries, MAX_ENTRIES);
} hash_map SEC(".maps");
struct {
__uint(type, BPF_MAP_TYPE_LRU_HASH);
__type(key, u32);
__type(value, long);
__uint(max_entries, 10000);
} lru_hash_map SEC(".maps");
struct {
__uint(type, BPF_MAP_TYPE_LRU_HASH);
__type(key, u32);
__type(value, long);
__uint(max_entries, 10000);
__uint(map_flags, BPF_F_NO_COMMON_LRU);
} nocommon_lru_hash_map SEC(".maps");
struct inner_lru {
__uint(type, BPF_MAP_TYPE_LRU_HASH);
__type(key, u32);
__type(value, long);
__uint(max_entries, MAX_ENTRIES);
__uint(map_flags, BPF_F_NUMA_NODE);
__uint(numa_node, 0);
} inner_lru_hash_map SEC(".maps");
struct {
__uint(type, BPF_MAP_TYPE_ARRAY_OF_MAPS);
__uint(max_entries, MAX_NR_CPUS);
__uint(key_size, sizeof(u32));
__array(values, struct inner_lru); /* use inner_lru as inner map */
} array_of_lru_hashs SEC(".maps") = {
/* statically initialize the first element */
.values = { &inner_lru_hash_map },
};
struct {
__uint(type, BPF_MAP_TYPE_PERCPU_HASH);
__uint(key_size, sizeof(u32));
__uint(value_size, sizeof(long));
__uint(max_entries, MAX_ENTRIES);
} percpu_hash_map SEC(".maps");
struct {
__uint(type, BPF_MAP_TYPE_HASH);
__type(key, u32);
__type(value, long);
__uint(max_entries, MAX_ENTRIES);
__uint(map_flags, BPF_F_NO_PREALLOC);
} hash_map_alloc SEC(".maps");
struct {
__uint(type, BPF_MAP_TYPE_PERCPU_HASH);
__uint(key_size, sizeof(u32));
__uint(value_size, sizeof(long));
__uint(max_entries, MAX_ENTRIES);
__uint(map_flags, BPF_F_NO_PREALLOC);
} percpu_hash_map_alloc SEC(".maps");
struct {
__uint(type, BPF_MAP_TYPE_LPM_TRIE);
__uint(key_size, 8);
__uint(value_size, sizeof(long));
__uint(max_entries, 10000);
__uint(map_flags, BPF_F_NO_PREALLOC);
} lpm_trie_map_alloc SEC(".maps");
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__type(key, u32);
__type(value, long);
__uint(max_entries, MAX_ENTRIES);
} array_map SEC(".maps");
struct {
__uint(type, BPF_MAP_TYPE_LRU_HASH);
__type(key, u32);
__type(value, long);
__uint(max_entries, MAX_ENTRIES);
} lru_hash_lookup_map SEC(".maps");
SEC("kprobe/" SYSCALL(sys_getuid))
int stress_hmap(struct pt_regs *ctx)
{
u32 key = bpf_get_current_pid_tgid();
long init_val = 1;
long *value;
bpf_map_update_elem(&hash_map, &key, &init_val, BPF_ANY);
value = bpf_map_lookup_elem(&hash_map, &key);
if (value)
bpf_map_delete_elem(&hash_map, &key);
bpf: Add tests for the LRU bpf_htab This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12 02:55:11 +08:00
return 0;
}
SEC("kprobe/" SYSCALL(sys_geteuid))
int stress_percpu_hmap(struct pt_regs *ctx)
{
u32 key = bpf_get_current_pid_tgid();
long init_val = 1;
long *value;
bpf_map_update_elem(&percpu_hash_map, &key, &init_val, BPF_ANY);
value = bpf_map_lookup_elem(&percpu_hash_map, &key);
if (value)
bpf_map_delete_elem(&percpu_hash_map, &key);
return 0;
}
SEC("kprobe/" SYSCALL(sys_getgid))
int stress_hmap_alloc(struct pt_regs *ctx)
{
u32 key = bpf_get_current_pid_tgid();
long init_val = 1;
long *value;
bpf_map_update_elem(&hash_map_alloc, &key, &init_val, BPF_ANY);
value = bpf_map_lookup_elem(&hash_map_alloc, &key);
if (value)
bpf_map_delete_elem(&hash_map_alloc, &key);
return 0;
}
SEC("kprobe/" SYSCALL(sys_getegid))
int stress_percpu_hmap_alloc(struct pt_regs *ctx)
{
u32 key = bpf_get_current_pid_tgid();
long init_val = 1;
long *value;
bpf_map_update_elem(&percpu_hash_map_alloc, &key, &init_val, BPF_ANY);
value = bpf_map_lookup_elem(&percpu_hash_map_alloc, &key);
if (value)
bpf_map_delete_elem(&percpu_hash_map_alloc, &key);
return 0;
}
bpf: Add tests for the LRU bpf_htab This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12 02:55:11 +08:00
samples: bpf: Fix bpf programs with kprobe/sys_connect event Currently, BPF programs with kprobe/sys_connect does not work properly. Commit 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64") This commit modifies the bpf_load behavior of kprobe events in the x64 architecture. If the current kprobe event target starts with "sys_*", add the prefix "__x64_" to the front of the event. Appending "__x64_" prefix with kprobe/sys_* event was appropriate as a solution to most of the problems caused by the commit below. commit d5a00528b58c ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()") However, there is a problem with the sys_connect kprobe event that does not work properly. For __sys_connect event, parameters can be fetched normally, but for __x64_sys_connect, parameters cannot be fetched. ffffffff818d3520 <__x64_sys_connect>: ffffffff818d3520: e8 fb df 32 00 callq 0xffffffff81c01520 <__fentry__> ffffffff818d3525: 48 8b 57 60 movq 96(%rdi), %rdx ffffffff818d3529: 48 8b 77 68 movq 104(%rdi), %rsi ffffffff818d352d: 48 8b 7f 70 movq 112(%rdi), %rdi ffffffff818d3531: e8 1a ff ff ff callq 0xffffffff818d3450 <__sys_connect> ffffffff818d3536: 48 98 cltq ffffffff818d3538: c3 retq ffffffff818d3539: 0f 1f 80 00 00 00 00 nopl (%rax) As the assembly code for __x64_sys_connect shows, parameters should be fetched and set into rdi, rsi, rdx registers prior to calling __sys_connect. Because of this problem, this commit fixes the sys_connect event by first getting the value of the rdi register and then the value of the rdi, rsi, and rdx register through an offset based on that value. Fixes: 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200707184855.30968-2-danieltimlee@gmail.com
2020-07-08 02:48:52 +08:00
SEC("kprobe/" SYSCALL(sys_connect))
bpf: Add tests for the LRU bpf_htab This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12 02:55:11 +08:00
int stress_lru_hmap_alloc(struct pt_regs *ctx)
{
samples: bpf: Fix bpf programs with kprobe/sys_connect event Currently, BPF programs with kprobe/sys_connect does not work properly. Commit 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64") This commit modifies the bpf_load behavior of kprobe events in the x64 architecture. If the current kprobe event target starts with "sys_*", add the prefix "__x64_" to the front of the event. Appending "__x64_" prefix with kprobe/sys_* event was appropriate as a solution to most of the problems caused by the commit below. commit d5a00528b58c ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()") However, there is a problem with the sys_connect kprobe event that does not work properly. For __sys_connect event, parameters can be fetched normally, but for __x64_sys_connect, parameters cannot be fetched. ffffffff818d3520 <__x64_sys_connect>: ffffffff818d3520: e8 fb df 32 00 callq 0xffffffff81c01520 <__fentry__> ffffffff818d3525: 48 8b 57 60 movq 96(%rdi), %rdx ffffffff818d3529: 48 8b 77 68 movq 104(%rdi), %rsi ffffffff818d352d: 48 8b 7f 70 movq 112(%rdi), %rdi ffffffff818d3531: e8 1a ff ff ff callq 0xffffffff818d3450 <__sys_connect> ffffffff818d3536: 48 98 cltq ffffffff818d3538: c3 retq ffffffff818d3539: 0f 1f 80 00 00 00 00 nopl (%rax) As the assembly code for __x64_sys_connect shows, parameters should be fetched and set into rdi, rsi, rdx registers prior to calling __sys_connect. Because of this problem, this commit fixes the sys_connect event by first getting the value of the rdi register and then the value of the rdi, rsi, and rdx register through an offset based on that value. Fixes: 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200707184855.30968-2-danieltimlee@gmail.com
2020-07-08 02:48:52 +08:00
struct pt_regs *real_regs = (struct pt_regs *)PT_REGS_PARM1_CORE(ctx);
char fmt[] = "Failed at stress_lru_hmap_alloc. ret:%dn";
union {
u16 dst6[8];
struct {
u16 magic0;
u16 magic1;
u16 tcase;
u16 unused16;
u32 unused32;
u32 key;
};
} test_params;
struct sockaddr_in6 *in6;
u16 test_case;
int addrlen, ret;
bpf: Add tests for the LRU bpf_htab This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12 02:55:11 +08:00
long val = 1;
u32 key = 0;
bpf: Add tests for the LRU bpf_htab This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12 02:55:11 +08:00
samples: bpf: Fix bpf programs with kprobe/sys_connect event Currently, BPF programs with kprobe/sys_connect does not work properly. Commit 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64") This commit modifies the bpf_load behavior of kprobe events in the x64 architecture. If the current kprobe event target starts with "sys_*", add the prefix "__x64_" to the front of the event. Appending "__x64_" prefix with kprobe/sys_* event was appropriate as a solution to most of the problems caused by the commit below. commit d5a00528b58c ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()") However, there is a problem with the sys_connect kprobe event that does not work properly. For __sys_connect event, parameters can be fetched normally, but for __x64_sys_connect, parameters cannot be fetched. ffffffff818d3520 <__x64_sys_connect>: ffffffff818d3520: e8 fb df 32 00 callq 0xffffffff81c01520 <__fentry__> ffffffff818d3525: 48 8b 57 60 movq 96(%rdi), %rdx ffffffff818d3529: 48 8b 77 68 movq 104(%rdi), %rsi ffffffff818d352d: 48 8b 7f 70 movq 112(%rdi), %rdi ffffffff818d3531: e8 1a ff ff ff callq 0xffffffff818d3450 <__sys_connect> ffffffff818d3536: 48 98 cltq ffffffff818d3538: c3 retq ffffffff818d3539: 0f 1f 80 00 00 00 00 nopl (%rax) As the assembly code for __x64_sys_connect shows, parameters should be fetched and set into rdi, rsi, rdx registers prior to calling __sys_connect. Because of this problem, this commit fixes the sys_connect event by first getting the value of the rdi register and then the value of the rdi, rsi, and rdx register through an offset based on that value. Fixes: 34745aed515c ("samples/bpf: fix kprobe attachment issue on x64") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200707184855.30968-2-danieltimlee@gmail.com
2020-07-08 02:48:52 +08:00
in6 = (struct sockaddr_in6 *)PT_REGS_PARM2_CORE(real_regs);
addrlen = (int)PT_REGS_PARM3_CORE(real_regs);
bpf: Add tests for the LRU bpf_htab This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12 02:55:11 +08:00
if (addrlen != sizeof(*in6))
return 0;
bpf: Add tests for the LRU bpf_htab This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12 02:55:11 +08:00
ret = bpf_probe_read_user(test_params.dst6, sizeof(test_params.dst6),
&in6->sin6_addr);
if (ret)
goto done;
if (test_params.magic0 != 0xdead ||
test_params.magic1 != 0xbeef)
return 0;
test_case = test_params.tcase;
if (test_case != 3)
key = bpf_get_prandom_u32();
if (test_case == 0) {
ret = bpf_map_update_elem(&lru_hash_map, &key, &val, BPF_ANY);
} else if (test_case == 1) {
ret = bpf_map_update_elem(&nocommon_lru_hash_map, &key, &val,
BPF_ANY);
} else if (test_case == 2) {
void *nolocal_lru_map;
int cpu = bpf_get_smp_processor_id();
nolocal_lru_map = bpf_map_lookup_elem(&array_of_lru_hashs,
&cpu);
if (!nolocal_lru_map) {
ret = -ENOENT;
goto done;
}
ret = bpf_map_update_elem(nolocal_lru_map, &key, &val,
BPF_ANY);
} else if (test_case == 3) {
u32 i;
key = test_params.key;
#pragma clang loop unroll(full)
for (i = 0; i < 32; i++) {
bpf_map_lookup_elem(&lru_hash_lookup_map, &key);
key++;
}
} else {
ret = -EINVAL;
}
bpf: Add tests for the LRU bpf_htab This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12 02:55:11 +08:00
done:
if (ret)
bpf_trace_printk(fmt, sizeof(fmt), ret);
bpf: Add tests for the LRU bpf_htab This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12 02:55:11 +08:00
return 0;
}
SEC("kprobe/" SYSCALL(sys_gettid))
int stress_lpm_trie_map_alloc(struct pt_regs *ctx)
{
union {
u32 b32[2];
u8 b8[8];
} key;
unsigned int i;
key.b32[0] = 32;
key.b8[4] = 192;
key.b8[5] = 168;
key.b8[6] = 0;
key.b8[7] = 1;
#pragma clang loop unroll(full)
for (i = 0; i < 32; ++i)
bpf_map_lookup_elem(&lpm_trie_map_alloc, &key);
return 0;
}
SEC("kprobe/" SYSCALL(sys_getpgid))
samples/bpf: add map_lookup microbenchmark $ map_perf_test 128 speed of HASH bpf_map_lookup_elem() in lookups per second w/o JIT w/JIT before 46M 58M after 42M 74M perf report before: 54.23% map_perf_test [kernel.kallsyms] [k] __htab_map_lookup_elem 14.24% map_perf_test [kernel.kallsyms] [k] lookup_elem_raw 8.84% map_perf_test [kernel.kallsyms] [k] htab_map_lookup_elem 5.93% map_perf_test [kernel.kallsyms] [k] bpf_map_lookup_elem 2.30% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2 1.49% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler after: 60.03% map_perf_test [kernel.kallsyms] [k] __htab_map_lookup_elem 18.07% map_perf_test [kernel.kallsyms] [k] lookup_elem_raw 2.91% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2 1.94% map_perf_test [kernel.kallsyms] [k] _einittext 1.90% map_perf_test [kernel.kallsyms] [k] __audit_syscall_exit 1.72% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler Notice that bpf_map_lookup_elem() and htab_map_lookup_elem() are trivial functions, yet they take sizeable amount of cpu time. htab_map_gen_lookup() removes bpf_map_lookup_elem() and converts htab_map_lookup_elem() into three BPF insns which causing cpu time for bpf_prog_da4fc6a3f41761a2() slightly increase. $ map_perf_test 256 speed of ARRAY bpf_map_lookup_elem() in lookups per second w/o JIT w/JIT before 97M 174M after 64M 280M before: 37.33% map_perf_test [kernel.kallsyms] [k] array_map_lookup_elem 13.95% map_perf_test [kernel.kallsyms] [k] bpf_map_lookup_elem 6.54% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2 4.57% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler after: 32.86% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2 6.54% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler array_map_gen_lookup() removes calls to array_map_lookup_elem() and bpf_map_lookup_elem() and replaces them with 7 bpf insns. The performance without JIT is slower, since executing extra insns in the interpreter is slower than running native C code, but with JIT the performance gains are obvious, since native C->x86 code is replaced with fewer bpf->x86 instructions. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16 09:26:44 +08:00
int stress_hash_map_lookup(struct pt_regs *ctx)
{
u32 key = 1, i;
long *value;
#pragma clang loop unroll(full)
for (i = 0; i < 64; ++i)
value = bpf_map_lookup_elem(&hash_map, &key);
return 0;
}
SEC("kprobe/" SYSCALL(sys_getppid))
samples/bpf: add map_lookup microbenchmark $ map_perf_test 128 speed of HASH bpf_map_lookup_elem() in lookups per second w/o JIT w/JIT before 46M 58M after 42M 74M perf report before: 54.23% map_perf_test [kernel.kallsyms] [k] __htab_map_lookup_elem 14.24% map_perf_test [kernel.kallsyms] [k] lookup_elem_raw 8.84% map_perf_test [kernel.kallsyms] [k] htab_map_lookup_elem 5.93% map_perf_test [kernel.kallsyms] [k] bpf_map_lookup_elem 2.30% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2 1.49% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler after: 60.03% map_perf_test [kernel.kallsyms] [k] __htab_map_lookup_elem 18.07% map_perf_test [kernel.kallsyms] [k] lookup_elem_raw 2.91% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2 1.94% map_perf_test [kernel.kallsyms] [k] _einittext 1.90% map_perf_test [kernel.kallsyms] [k] __audit_syscall_exit 1.72% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler Notice that bpf_map_lookup_elem() and htab_map_lookup_elem() are trivial functions, yet they take sizeable amount of cpu time. htab_map_gen_lookup() removes bpf_map_lookup_elem() and converts htab_map_lookup_elem() into three BPF insns which causing cpu time for bpf_prog_da4fc6a3f41761a2() slightly increase. $ map_perf_test 256 speed of ARRAY bpf_map_lookup_elem() in lookups per second w/o JIT w/JIT before 97M 174M after 64M 280M before: 37.33% map_perf_test [kernel.kallsyms] [k] array_map_lookup_elem 13.95% map_perf_test [kernel.kallsyms] [k] bpf_map_lookup_elem 6.54% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2 4.57% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler after: 32.86% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2 6.54% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler array_map_gen_lookup() removes calls to array_map_lookup_elem() and bpf_map_lookup_elem() and replaces them with 7 bpf insns. The performance without JIT is slower, since executing extra insns in the interpreter is slower than running native C code, but with JIT the performance gains are obvious, since native C->x86 code is replaced with fewer bpf->x86 instructions. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16 09:26:44 +08:00
int stress_array_map_lookup(struct pt_regs *ctx)
{
u32 key = 1, i;
long *value;
#pragma clang loop unroll(full)
for (i = 0; i < 64; ++i)
value = bpf_map_lookup_elem(&array_map, &key);
return 0;
}
char _license[] SEC("license") = "GPL";
u32 _version SEC("version") = LINUX_VERSION_CODE;