2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 02:34:01 +08:00
linux-next/include/linux/perf_counter.h

683 lines
17 KiB
C
Raw Normal View History

/*
* Performance counters:
*
* Copyright(C) 2008, Thomas Gleixner <tglx@linutronix.de>
* Copyright(C) 2008, Red Hat, Inc., Ingo Molnar
*
* Data type definitions, declarations, prototypes.
*
* Started by: Thomas Gleixner and Ingo Molnar
*
* For licencing details see kernel-base/COPYING
*/
#ifndef _LINUX_PERF_COUNTER_H
#define _LINUX_PERF_COUNTER_H
#include <linux/types.h>
#include <linux/ioctl.h>
#include <asm/byteorder.h>
/*
* User-space ABI bits:
*/
/*
* hw_event.type
*/
enum perf_event_types {
PERF_TYPE_HARDWARE = 0,
PERF_TYPE_SOFTWARE = 1,
PERF_TYPE_TRACEPOINT = 2,
/*
* available TYPE space, raw is the max value.
*/
PERF_TYPE_RAW = 128,
};
/*
* Generalized performance counter event types, used by the hw_event.event_id
* parameter of the sys_perf_counter_open() syscall:
*/
enum hw_event_ids {
/*
* Common hardware events, generalized by the kernel:
*/
PERF_COUNT_CPU_CYCLES = 0,
PERF_COUNT_INSTRUCTIONS = 1,
PERF_COUNT_CACHE_REFERENCES = 2,
PERF_COUNT_CACHE_MISSES = 3,
PERF_COUNT_BRANCH_INSTRUCTIONS = 4,
PERF_COUNT_BRANCH_MISSES = 5,
PERF_COUNT_BUS_CYCLES = 6,
PERF_HW_EVENTS_MAX = 7,
};
/*
* Special "software" counters provided by the kernel, even if the hardware
* does not support performance counters. These counters measure various
* physical and sw events of the kernel (and allow the profiling of them as
* well):
*/
enum sw_event_ids {
PERF_COUNT_CPU_CLOCK = 0,
PERF_COUNT_TASK_CLOCK = 1,
PERF_COUNT_PAGE_FAULTS = 2,
PERF_COUNT_CONTEXT_SWITCHES = 3,
PERF_COUNT_CPU_MIGRATIONS = 4,
PERF_COUNT_PAGE_FAULTS_MIN = 5,
PERF_COUNT_PAGE_FAULTS_MAJ = 6,
PERF_SW_EVENTS_MAX = 7,
};
#define __PERF_COUNTER_MASK(name) \
(((1ULL << PERF_COUNTER_##name##_BITS) - 1) << \
PERF_COUNTER_##name##_SHIFT)
#define PERF_COUNTER_RAW_BITS 1
#define PERF_COUNTER_RAW_SHIFT 63
#define PERF_COUNTER_RAW_MASK __PERF_COUNTER_MASK(RAW)
#define PERF_COUNTER_CONFIG_BITS 63
#define PERF_COUNTER_CONFIG_SHIFT 0
#define PERF_COUNTER_CONFIG_MASK __PERF_COUNTER_MASK(CONFIG)
#define PERF_COUNTER_TYPE_BITS 7
#define PERF_COUNTER_TYPE_SHIFT 56
#define PERF_COUNTER_TYPE_MASK __PERF_COUNTER_MASK(TYPE)
#define PERF_COUNTER_EVENT_BITS 56
#define PERF_COUNTER_EVENT_SHIFT 0
#define PERF_COUNTER_EVENT_MASK __PERF_COUNTER_MASK(EVENT)
/*
* Bits that can be set in hw_event.record_type to request information
* in the overflow packets.
*/
enum perf_counter_record_format {
PERF_RECORD_IP = 1U << 0,
PERF_RECORD_TID = 1U << 1,
PERF_RECORD_TIME = 1U << 2,
PERF_RECORD_ADDR = 1U << 3,
PERF_RECORD_GROUP = 1U << 4,
PERF_RECORD_CALLCHAIN = 1U << 5,
PERF_RECORD_CONFIG = 1U << 6,
PERF_RECORD_CPU = 1U << 7,
};
perf_counter: record time running and time enabled for each counter Impact: new functionality Currently, if there are more counters enabled than can fit on the CPU, the kernel will multiplex the counters on to the hardware using round-robin scheduling. That isn't too bad for sampling counters, but for counting counters it means that the value read from a counter represents some unknown fraction of the true count of events that occurred while the counter was enabled. This remedies the situation by keeping track of how long each counter is enabled for, and how long it is actually on the cpu and counting events. These times are recorded in nanoseconds using the task clock for per-task counters and the cpu clock for per-cpu counters. These values can be supplied to userspace on a read from the counter. Userspace requests that they be supplied after the counter value by setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field when creating the counter. (There is no way to change the read format after the counter is created, though it would be possible to add some way to do that.) Using this information it is possible for userspace to scale the count it reads from the counter to get an estimate of the true count: true_count_estimate = count * total_time_enabled / total_time_running This also lets userspace detect the situation where the counter never got to go on the cpu: total_time_running == 0. This functionality has been requested by the PAPI developers, and will be generally needed for interpreting the count values from counting counters correctly. In the implementation, this keeps 5 time values (in nanoseconds) for each counter: total_time_enabled and total_time_running are used when the counter is in state OFF or ERROR and for reporting back to userspace. When the counter is in state INACTIVE or ACTIVE, it is the tstamp_enabled, tstamp_running and tstamp_stopped values that are relevant, and total_time_enabled and total_time_running are determined from them. (tstamp_stopped is only used in INACTIVE state.) The reason for doing it like this is that it means that only counters being enabled or disabled at sched-in and sched-out time need to be updated. There are no new loops that iterate over all counters to update total_time_enabled or total_time_running. This also keeps separate child_total_time_running and child_total_time_enabled fields that get added in when reporting the totals to userspace. They are separate fields so that they can be atomic. We don't want to use atomics for total_time_running, total_time_enabled etc., because then we would have to use atomic sequences to update them, which are slower than regular arithmetic and memory accesses. It is possible to measure total_time_running by adding a task_clock counter to each group of counters, and total_time_enabled can be measured approximately with a top-level task_clock counter (though inaccuracies will creep in if you need to disable and enable groups since it is not possible in general to disable/enable the top-level task_clock counter simultaneously with another group). However, that adds extra overhead - I measured around 15% increase in the context switch latency reported by lat_ctx (from lmbench) when a task_clock counter was added to each of 2 groups, and around 25% increase when a task_clock counter was added to each of 4 groups. (In both cases a top-level task-clock counter was also added.) In contrast, the code added in this commit gives better information with no overhead that I could measure (in fact in some cases I measured lower times with this code, but the differences were all less than one standard deviation). [ v2: address review comments by Andrew Morton. ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 19:46:58 +08:00
/*
* Bits that can be set in hw_event.read_format to request that
* reads on the counter should return the indicated quantities,
* in increasing order of bit value, after the counter value.
*/
enum perf_counter_read_format {
PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0,
PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1,
PERF_FORMAT_ID = 1U << 2,
perf_counter: record time running and time enabled for each counter Impact: new functionality Currently, if there are more counters enabled than can fit on the CPU, the kernel will multiplex the counters on to the hardware using round-robin scheduling. That isn't too bad for sampling counters, but for counting counters it means that the value read from a counter represents some unknown fraction of the true count of events that occurred while the counter was enabled. This remedies the situation by keeping track of how long each counter is enabled for, and how long it is actually on the cpu and counting events. These times are recorded in nanoseconds using the task clock for per-task counters and the cpu clock for per-cpu counters. These values can be supplied to userspace on a read from the counter. Userspace requests that they be supplied after the counter value by setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field when creating the counter. (There is no way to change the read format after the counter is created, though it would be possible to add some way to do that.) Using this information it is possible for userspace to scale the count it reads from the counter to get an estimate of the true count: true_count_estimate = count * total_time_enabled / total_time_running This also lets userspace detect the situation where the counter never got to go on the cpu: total_time_running == 0. This functionality has been requested by the PAPI developers, and will be generally needed for interpreting the count values from counting counters correctly. In the implementation, this keeps 5 time values (in nanoseconds) for each counter: total_time_enabled and total_time_running are used when the counter is in state OFF or ERROR and for reporting back to userspace. When the counter is in state INACTIVE or ACTIVE, it is the tstamp_enabled, tstamp_running and tstamp_stopped values that are relevant, and total_time_enabled and total_time_running are determined from them. (tstamp_stopped is only used in INACTIVE state.) The reason for doing it like this is that it means that only counters being enabled or disabled at sched-in and sched-out time need to be updated. There are no new loops that iterate over all counters to update total_time_enabled or total_time_running. This also keeps separate child_total_time_running and child_total_time_enabled fields that get added in when reporting the totals to userspace. They are separate fields so that they can be atomic. We don't want to use atomics for total_time_running, total_time_enabled etc., because then we would have to use atomic sequences to update them, which are slower than regular arithmetic and memory accesses. It is possible to measure total_time_running by adding a task_clock counter to each group of counters, and total_time_enabled can be measured approximately with a top-level task_clock counter (though inaccuracies will creep in if you need to disable and enable groups since it is not possible in general to disable/enable the top-level task_clock counter simultaneously with another group). However, that adds extra overhead - I measured around 15% increase in the context switch latency reported by lat_ctx (from lmbench) when a task_clock counter was added to each of 2 groups, and around 25% increase when a task_clock counter was added to each of 4 groups. (In both cases a top-level task-clock counter was also added.) In contrast, the code added in this commit gives better information with no overhead that I could measure (in fact in some cases I measured lower times with this code, but the differences were all less than one standard deviation). [ v2: address review comments by Andrew Morton. ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 19:46:58 +08:00
};
/*
* Hardware event to monitor via a performance monitoring counter:
*/
struct perf_counter_hw_event {
/*
* The MSB of the config word signifies if the rest contains cpu
* specific (raw) counter configuration data, if unset, the next
* 7 bits are an event type and the rest of the bits are the event
* identifier.
*/
__u64 config;
union {
__u64 irq_period;
__u64 irq_freq;
};
__u32 record_type;
__u32 read_format;
__u64 disabled : 1, /* off by default */
perf_counters: allow users to count user, kernel and/or hypervisor events Impact: new perf_counter feature This extends the perf_counter_hw_event struct with bits that specify that events in user, kernel and/or hypervisor mode should not be counted (i.e. should be excluded), and adds code to program the PMU mode selection bits accordingly on x86 and powerpc. For software counters, we don't currently have the infrastructure to distinguish which mode an event occurs in, so we currently fail the counter initialization if the setting of the hw_event.exclude_* bits would require us to distinguish. Context switches and CPU migrations are currently considered to occur in kernel mode. On x86, this changes the previous policy that only root can count kernel events. Now non-root users can count kernel events or exclude them. Non-root users still can't use NMI events, though. On x86 we don't appear to have any way to control whether hypervisor events are counted or not, so hw_event.exclude_hv is ignored. On powerpc, the selection of whether to count events in user, kernel and/or hypervisor mode is PMU-wide, not per-counter, so this adds a check that the hw_event.exclude_* settings are the same as other events on the PMU. Counters being added to a group have to have the same settings as the other hardware counters in the group. Counters and groups can only be enabled in hw_perf_group_sched_in or power_perf_enable if they have the same settings as any other counters already on the PMU. If we are not running on a hypervisor, the exclude_hv setting is ignored (by forcing it to 0) since we can't ever get any hypervisor events. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-02-11 11:35:35 +08:00
nmi : 1, /* NMI sampling */
inherit : 1, /* children inherit it */
pinned : 1, /* must always be on PMU */
exclusive : 1, /* only group on PMU */
exclude_user : 1, /* don't count user */
exclude_kernel : 1, /* ditto kernel */
exclude_hv : 1, /* ditto hypervisor */
exclude_idle : 1, /* don't count when idle */
mmap : 1, /* include mmap data */
munmap : 1, /* include munmap data */
comm : 1, /* include comm data */
freq : 1, /* use freq, not period */
perf_counters: allow users to count user, kernel and/or hypervisor events Impact: new perf_counter feature This extends the perf_counter_hw_event struct with bits that specify that events in user, kernel and/or hypervisor mode should not be counted (i.e. should be excluded), and adds code to program the PMU mode selection bits accordingly on x86 and powerpc. For software counters, we don't currently have the infrastructure to distinguish which mode an event occurs in, so we currently fail the counter initialization if the setting of the hw_event.exclude_* bits would require us to distinguish. Context switches and CPU migrations are currently considered to occur in kernel mode. On x86, this changes the previous policy that only root can count kernel events. Now non-root users can count kernel events or exclude them. Non-root users still can't use NMI events, though. On x86 we don't appear to have any way to control whether hypervisor events are counted or not, so hw_event.exclude_hv is ignored. On powerpc, the selection of whether to count events in user, kernel and/or hypervisor mode is PMU-wide, not per-counter, so this adds a check that the hw_event.exclude_* settings are the same as other events on the PMU. Counters being added to a group have to have the same settings as the other hardware counters in the group. Counters and groups can only be enabled in hw_perf_group_sched_in or power_perf_enable if they have the same settings as any other counters already on the PMU. If we are not running on a hypervisor, the exclude_hv setting is ignored (by forcing it to 0) since we can't ever get any hypervisor events. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-02-11 11:35:35 +08:00
__reserved_1 : 51;
__u32 wakeup_events; /* wakeup every n events */
__u32 __reserved_2;
__u64 __reserved_3;
__u64 __reserved_4;
};
perf_counter: Add counter enable/disable ioctls Impact: New perf_counter features This primarily adds a way for perf_counter users to enable and disable counters and groups. Enabling or disabling a counter or group also enables or disables all of the child counters that have been cloned from it to monitor children of the task monitored by the top-level counter. The userspace interface to enable/disable counters is via ioctl on the counter file descriptor. Along the way this extends the code that handles child counters to handle child counter groups properly. A group with multiple counters will be cloned to child tasks if and only if the group leader has the hw_event.inherit bit set - if it is set the whole group is cloned as a group in the child task. In order to be able to enable or disable all child counters of a given top-level counter, we need a way to find them all. Hence I have added a child_list field to struct perf_counter, which is the head of the list of children for a top-level counter, or the link in that list for a child counter. That list is protected by the perf_counter.mutex field. This also adds a mutex to the perf_counter_context struct. Previously the list of counters was protected just by the lock field in the context, which meant that perf_counter_init_task had to take that lock and then take whatever lock/mutex protects the top-level counter's child_list. But the counter enable/disable functions need to take that lock in order to traverse the list, then for each counter take the lock in that counter's context in order to change the counter's state safely, which will lead to a deadlock. To solve this, we now have both a mutex and a spinlock in the context, and taking either is sufficient to ensure the list of counters can't change - you have to take both before changing the list. Now perf_counter_init_task takes the mutex instead of the lock (which incidentally means that inherit_counter can use GFP_KERNEL instead of GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new enable/disable functions can take the mutex while traversing the list of child counters without incurring a possible deadlock when the counter manipulation code locks the context for a child counter. We also had an misfeature that the first counter added to a context would possibly not go on until the next sched-in, because we were using ctx->nr_active to detect if the context was running on a CPU. But nr_active is the number of active counters, and if that was zero (because the context didn't have any counters yet) it would look like the context wasn't running on a cpu and so the retry code in __perf_install_in_context wouldn't retry. So this adds an 'is_active' field that is set when the context is on a CPU, even if it has no counters. The is_active field is only used for task contexts, not for per-cpu contexts. If we enable a subsidiary counter in a group that is active on a CPU, and the arch code can't enable the counter, then we have to pull the whole group off the CPU. We do this with group_sched_out, which gets moved up in the file so it comes before all its callers. This also adds similar logic to __perf_install_in_context so that the "all on, or none" invariant of groups is preserved when adding a new counter to a group. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 15:10:22 +08:00
/*
* Ioctls that can be done on a perf counter fd:
*/
#define PERF_COUNTER_IOC_ENABLE _IOW('$', 0, u32)
#define PERF_COUNTER_IOC_DISABLE _IOW('$', 1, u32)
#define PERF_COUNTER_IOC_REFRESH _IOW('$', 2, u32)
#define PERF_COUNTER_IOC_RESET _IOW('$', 3, u32)
enum perf_counter_ioc_flags {
PERF_IOC_FLAG_GROUP = 1U << 0,
};
perf_counter: Add counter enable/disable ioctls Impact: New perf_counter features This primarily adds a way for perf_counter users to enable and disable counters and groups. Enabling or disabling a counter or group also enables or disables all of the child counters that have been cloned from it to monitor children of the task monitored by the top-level counter. The userspace interface to enable/disable counters is via ioctl on the counter file descriptor. Along the way this extends the code that handles child counters to handle child counter groups properly. A group with multiple counters will be cloned to child tasks if and only if the group leader has the hw_event.inherit bit set - if it is set the whole group is cloned as a group in the child task. In order to be able to enable or disable all child counters of a given top-level counter, we need a way to find them all. Hence I have added a child_list field to struct perf_counter, which is the head of the list of children for a top-level counter, or the link in that list for a child counter. That list is protected by the perf_counter.mutex field. This also adds a mutex to the perf_counter_context struct. Previously the list of counters was protected just by the lock field in the context, which meant that perf_counter_init_task had to take that lock and then take whatever lock/mutex protects the top-level counter's child_list. But the counter enable/disable functions need to take that lock in order to traverse the list, then for each counter take the lock in that counter's context in order to change the counter's state safely, which will lead to a deadlock. To solve this, we now have both a mutex and a spinlock in the context, and taking either is sufficient to ensure the list of counters can't change - you have to take both before changing the list. Now perf_counter_init_task takes the mutex instead of the lock (which incidentally means that inherit_counter can use GFP_KERNEL instead of GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new enable/disable functions can take the mutex while traversing the list of child counters without incurring a possible deadlock when the counter manipulation code locks the context for a child counter. We also had an misfeature that the first counter added to a context would possibly not go on until the next sched-in, because we were using ctx->nr_active to detect if the context was running on a CPU. But nr_active is the number of active counters, and if that was zero (because the context didn't have any counters yet) it would look like the context wasn't running on a cpu and so the retry code in __perf_install_in_context wouldn't retry. So this adds an 'is_active' field that is set when the context is on a CPU, even if it has no counters. The is_active field is only used for task contexts, not for per-cpu contexts. If we enable a subsidiary counter in a group that is active on a CPU, and the arch code can't enable the counter, then we have to pull the whole group off the CPU. We do this with group_sched_out, which gets moved up in the file so it comes before all its callers. This also adds similar logic to __perf_install_in_context so that the "all on, or none" invariant of groups is preserved when adding a new counter to a group. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 15:10:22 +08:00
/*
* Structure of the page that can be mapped via mmap
*/
struct perf_counter_mmap_page {
__u32 version; /* version number of this structure */
__u32 compat_version; /* lowest version this is compat with */
/*
* Bits needed to read the hw counters in user-space.
*
* u32 seq;
* s64 count;
*
* do {
* seq = pc->lock;
*
* barrier()
* if (pc->index) {
* count = pmc_read(pc->index - 1);
* count += pc->offset;
* } else
* goto regular_read;
*
* barrier();
* } while (pc->lock != seq);
*
* NOTE: for obvious reason this only works on self-monitoring
* processes.
*/
__u32 lock; /* seqlock for synchronization */
__u32 index; /* hardware counter identifier */
__s64 offset; /* add to hardware counter value */
/*
* Control data for the mmap() data buffer.
*
* User-space reading this value should issue an rmb(), on SMP capable
* platforms, after reading this value -- see perf_counter_wakeup().
*/
__u32 data_head; /* head in the data section */
};
perf_counter: allow arch to supply event misc flags and instruction pointer At present the values we put in overflow events for the misc flags indicating processor mode and the instruction pointer are obtained using the standard user_mode() and instruction_pointer() functions. Those functions tell you where the performance monitor interrupt was taken, which might not be exactly where the counter overflow occurred, for example because interrupts were disabled at the point where the overflow occurred, or because the processor had many instructions in flight and chose to complete some more instructions beyond the one that caused the counter overflow. Some architectures (e.g. powerpc) can supply more precise information about where the counter overflow occurred and the processor mode at that point. This introduces new functions, perf_misc_flags() and perf_instruction_pointer(), which arch code can override to provide more precise information if available. They have default implementations which are identical to the existing code. This also adds a new misc flag value, PERF_EVENT_MISC_HYPERVISOR, for the case where a counter overflow occurred in the hypervisor. We encode the processor mode in the 2 bits previously used to indicate user or kernel mode; the values for user and kernel mode are unchanged and hypervisor mode is indicated by both bits being set. [ Impact: generalize perfcounter core facilities ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18956.1272.818511.561835@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-14 19:48:08 +08:00
#define PERF_EVENT_MISC_CPUMODE_MASK (3 << 0)
#define PERF_EVENT_MISC_CPUMODE_UNKNOWN (0 << 0)
#define PERF_EVENT_MISC_KERNEL (1 << 0)
perf_counter: allow arch to supply event misc flags and instruction pointer At present the values we put in overflow events for the misc flags indicating processor mode and the instruction pointer are obtained using the standard user_mode() and instruction_pointer() functions. Those functions tell you where the performance monitor interrupt was taken, which might not be exactly where the counter overflow occurred, for example because interrupts were disabled at the point where the overflow occurred, or because the processor had many instructions in flight and chose to complete some more instructions beyond the one that caused the counter overflow. Some architectures (e.g. powerpc) can supply more precise information about where the counter overflow occurred and the processor mode at that point. This introduces new functions, perf_misc_flags() and perf_instruction_pointer(), which arch code can override to provide more precise information if available. They have default implementations which are identical to the existing code. This also adds a new misc flag value, PERF_EVENT_MISC_HYPERVISOR, for the case where a counter overflow occurred in the hypervisor. We encode the processor mode in the 2 bits previously used to indicate user or kernel mode; the values for user and kernel mode are unchanged and hypervisor mode is indicated by both bits being set. [ Impact: generalize perfcounter core facilities ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18956.1272.818511.561835@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-14 19:48:08 +08:00
#define PERF_EVENT_MISC_USER (2 << 0)
#define PERF_EVENT_MISC_HYPERVISOR (3 << 0)
#define PERF_EVENT_MISC_OVERFLOW (1 << 2)
struct perf_event_header {
__u32 type;
__u16 misc;
__u16 size;
};
enum perf_event_type {
/*
* The MMAP events record the PROT_EXEC mappings so that we can
* correlate userspace IPs to code. They have the following structure:
*
* struct {
* struct perf_event_header header;
*
* u32 pid, tid;
* u64 addr;
* u64 len;
* u64 pgoff;
* char filename[];
* };
*/
PERF_EVENT_MMAP = 1,
PERF_EVENT_MUNMAP = 2,
/*
* struct {
* struct perf_event_header header;
*
* u32 pid, tid;
* char comm[];
* };
*/
PERF_EVENT_COMM = 3,
/*
* struct {
* struct perf_event_header header;
* u64 time;
* u64 irq_period;
* };
*/
PERF_EVENT_PERIOD = 4,
/*
* struct {
* struct perf_event_header header;
* u64 time;
* };
*/
PERF_EVENT_THROTTLE = 5,
PERF_EVENT_UNTHROTTLE = 6,
/*
* When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field
* will be PERF_RECORD_*
*
* struct {
* struct perf_event_header header;
*
* { u64 ip; } && PERF_RECORD_IP
* { u32 pid, tid; } && PERF_RECORD_TID
* { u64 time; } && PERF_RECORD_TIME
* { u64 addr; } && PERF_RECORD_ADDR
* { u64 config; } && PERF_RECORD_CONFIG
* { u32 cpu, res; } && PERF_RECORD_CPU
*
* { u64 nr;
* { u64 id, val; } cnt[nr]; } && PERF_RECORD_GROUP
*
* { u16 nr,
* hv,
* kernel,
* user;
* u64 ips[nr]; } && PERF_RECORD_CALLCHAIN
* };
*/
};
#ifdef __KERNEL__
/*
* Kernel-internal data types and definitions:
*/
#ifdef CONFIG_PERF_COUNTERS
# include <asm/perf_counter.h>
#endif
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
#include <linux/spinlock.h>
#include <linux/hrtimer.h>
#include <linux/fs.h>
#include <linux/pid_namespace.h>
#include <asm/atomic.h>
struct task_struct;
static inline u64 perf_event_raw(struct perf_counter_hw_event *hw_event)
{
return hw_event->config & PERF_COUNTER_RAW_MASK;
}
static inline u64 perf_event_config(struct perf_counter_hw_event *hw_event)
{
return hw_event->config & PERF_COUNTER_CONFIG_MASK;
}
static inline u64 perf_event_type(struct perf_counter_hw_event *hw_event)
{
return (hw_event->config & PERF_COUNTER_TYPE_MASK) >>
PERF_COUNTER_TYPE_SHIFT;
}
static inline u64 perf_event_id(struct perf_counter_hw_event *hw_event)
{
return hw_event->config & PERF_COUNTER_EVENT_MASK;
}
/**
* struct hw_perf_counter - performance counter hardware details:
*/
struct hw_perf_counter {
#ifdef CONFIG_PERF_COUNTERS
union {
struct { /* hardware */
u64 config;
unsigned long config_base;
unsigned long counter_base;
int nmi;
int idx;
};
union { /* software */
atomic64_t count;
struct hrtimer hrtimer;
};
};
atomic64_t prev_count;
u64 irq_period;
atomic64_t period_left;
u64 interrupts;
#endif
};
struct perf_counter;
/**
* struct pmu - generic performance monitoring unit
*/
struct pmu {
int (*enable) (struct perf_counter *counter);
void (*disable) (struct perf_counter *counter);
void (*read) (struct perf_counter *counter);
void (*unthrottle) (struct perf_counter *counter);
};
/**
* enum perf_counter_active_state - the states of a counter
*/
enum perf_counter_active_state {
perf_counter: Add support for pinned and exclusive counter groups Impact: New perf_counter features A pinned counter group is one that the user wants to have on the CPU whenever possible, i.e. whenever the associated task is running, for a per-task group, or always for a per-cpu group. If the system cannot satisfy that, it puts the group into an error state where it is not scheduled any more and reads from it return EOF (i.e. 0 bytes read). The group can be released from error state and made readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we have finer-grained enable/disable controls on counters we'll be able to reset the error state on individual groups. An exclusive group is one that the user wants to be the only group using the CPU performance monitor hardware whenever it is on. The counter group scheduler will not schedule an exclusive group if there are already other groups on the CPU and will not schedule other groups onto the CPU if there is an exclusive group scheduled (that statement does not apply to groups containing only software counters, which can always go on and which do not prevent an exclusive group from going on). With an exclusive group, we will be able to let users program PMU registers at a low level without the concern that those settings will perturb other measurements. Along the way this reorganizes things a little: - is_software_counter() is moved to perf_counter.h. - cpuctx->active_oncpu now records the number of hardware counters on the CPU, i.e. it now excludes software counters. Nothing was reading cpuctx->active_oncpu before, so this change is harmless. - A new cpuctx->exclusive field records whether we currently have an exclusive group on the CPU. - counter_sched_out moves higher up in perf_counter.c and gets called from __perf_counter_remove_from_context and __perf_counter_exit_task, where we used to have essentially the same code. - __perf_counter_sched_in now goes through the counter list twice, doing the pinned counters in the first loop and the non-pinned counters in the second loop, in order to give the pinned counters the best chance to be scheduled in. Note that only a group leader can be exclusive or pinned, and that attribute applies to the whole group. This avoids some awkwardness in some corner cases (e.g. where a group leader is closed and the other group members get added to the context list). If we want to relax that restriction later, we can, and it is easier to relax a restriction than to apply a new one. This doesn't yet handle the case where a pinned counter is inherited and goes into error state in the child - the error state is not propagated up to the parent when the child exits, and arguably it should. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 18:00:30 +08:00
PERF_COUNTER_STATE_ERROR = -2,
PERF_COUNTER_STATE_OFF = -1,
PERF_COUNTER_STATE_INACTIVE = 0,
PERF_COUNTER_STATE_ACTIVE = 1,
};
struct file;
struct perf_mmap_data {
struct rcu_head rcu_head;
int nr_pages; /* nr of data pages */
int nr_locked; /* nr pages mlocked */
atomic_t poll; /* POLL_ for wakeups */
atomic_t head; /* write position */
atomic_t events; /* event limit */
atomic_t done_head; /* completed head */
atomic_t lock; /* concurrent writes */
atomic_t wakeup; /* needs a wakeup */
struct perf_counter_mmap_page *user_page;
void *data_pages[0];
};
struct perf_pending_entry {
struct perf_pending_entry *next;
void (*func)(struct perf_pending_entry *);
};
/**
* struct perf_counter - performance counter kernel representation:
*/
struct perf_counter {
#ifdef CONFIG_PERF_COUNTERS
struct list_head list_entry;
struct list_head event_entry;
struct list_head sibling_list;
int nr_siblings;
struct perf_counter *group_leader;
const struct pmu *pmu;
enum perf_counter_active_state state;
atomic64_t count;
perf_counter: record time running and time enabled for each counter Impact: new functionality Currently, if there are more counters enabled than can fit on the CPU, the kernel will multiplex the counters on to the hardware using round-robin scheduling. That isn't too bad for sampling counters, but for counting counters it means that the value read from a counter represents some unknown fraction of the true count of events that occurred while the counter was enabled. This remedies the situation by keeping track of how long each counter is enabled for, and how long it is actually on the cpu and counting events. These times are recorded in nanoseconds using the task clock for per-task counters and the cpu clock for per-cpu counters. These values can be supplied to userspace on a read from the counter. Userspace requests that they be supplied after the counter value by setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field when creating the counter. (There is no way to change the read format after the counter is created, though it would be possible to add some way to do that.) Using this information it is possible for userspace to scale the count it reads from the counter to get an estimate of the true count: true_count_estimate = count * total_time_enabled / total_time_running This also lets userspace detect the situation where the counter never got to go on the cpu: total_time_running == 0. This functionality has been requested by the PAPI developers, and will be generally needed for interpreting the count values from counting counters correctly. In the implementation, this keeps 5 time values (in nanoseconds) for each counter: total_time_enabled and total_time_running are used when the counter is in state OFF or ERROR and for reporting back to userspace. When the counter is in state INACTIVE or ACTIVE, it is the tstamp_enabled, tstamp_running and tstamp_stopped values that are relevant, and total_time_enabled and total_time_running are determined from them. (tstamp_stopped is only used in INACTIVE state.) The reason for doing it like this is that it means that only counters being enabled or disabled at sched-in and sched-out time need to be updated. There are no new loops that iterate over all counters to update total_time_enabled or total_time_running. This also keeps separate child_total_time_running and child_total_time_enabled fields that get added in when reporting the totals to userspace. They are separate fields so that they can be atomic. We don't want to use atomics for total_time_running, total_time_enabled etc., because then we would have to use atomic sequences to update them, which are slower than regular arithmetic and memory accesses. It is possible to measure total_time_running by adding a task_clock counter to each group of counters, and total_time_enabled can be measured approximately with a top-level task_clock counter (though inaccuracies will creep in if you need to disable and enable groups since it is not possible in general to disable/enable the top-level task_clock counter simultaneously with another group). However, that adds extra overhead - I measured around 15% increase in the context switch latency reported by lat_ctx (from lmbench) when a task_clock counter was added to each of 2 groups, and around 25% increase when a task_clock counter was added to each of 4 groups. (In both cases a top-level task-clock counter was also added.) In contrast, the code added in this commit gives better information with no overhead that I could measure (in fact in some cases I measured lower times with this code, but the differences were all less than one standard deviation). [ v2: address review comments by Andrew Morton. ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 19:46:58 +08:00
/*
* These are the total time in nanoseconds that the counter
* has been enabled (i.e. eligible to run, and the task has
* been scheduled in, if this is a per-task counter)
* and running (scheduled onto the CPU), respectively.
*
* They are computed from tstamp_enabled, tstamp_running and
* tstamp_stopped when the counter is in INACTIVE or ACTIVE state.
*/
u64 total_time_enabled;
u64 total_time_running;
/*
* These are timestamps used for computing total_time_enabled
* and total_time_running when the counter is in INACTIVE or
* ACTIVE state, measured in nanoseconds from an arbitrary point
* in time.
* tstamp_enabled: the notional time when the counter was enabled
* tstamp_running: the notional time when the counter was scheduled on
* tstamp_stopped: in INACTIVE state, the notional time when the
* counter was scheduled off.
*/
u64 tstamp_enabled;
u64 tstamp_running;
u64 tstamp_stopped;
struct perf_counter_hw_event hw_event;
struct hw_perf_counter hw;
struct perf_counter_context *ctx;
struct file *filp;
perf_counter: record time running and time enabled for each counter Impact: new functionality Currently, if there are more counters enabled than can fit on the CPU, the kernel will multiplex the counters on to the hardware using round-robin scheduling. That isn't too bad for sampling counters, but for counting counters it means that the value read from a counter represents some unknown fraction of the true count of events that occurred while the counter was enabled. This remedies the situation by keeping track of how long each counter is enabled for, and how long it is actually on the cpu and counting events. These times are recorded in nanoseconds using the task clock for per-task counters and the cpu clock for per-cpu counters. These values can be supplied to userspace on a read from the counter. Userspace requests that they be supplied after the counter value by setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field when creating the counter. (There is no way to change the read format after the counter is created, though it would be possible to add some way to do that.) Using this information it is possible for userspace to scale the count it reads from the counter to get an estimate of the true count: true_count_estimate = count * total_time_enabled / total_time_running This also lets userspace detect the situation where the counter never got to go on the cpu: total_time_running == 0. This functionality has been requested by the PAPI developers, and will be generally needed for interpreting the count values from counting counters correctly. In the implementation, this keeps 5 time values (in nanoseconds) for each counter: total_time_enabled and total_time_running are used when the counter is in state OFF or ERROR and for reporting back to userspace. When the counter is in state INACTIVE or ACTIVE, it is the tstamp_enabled, tstamp_running and tstamp_stopped values that are relevant, and total_time_enabled and total_time_running are determined from them. (tstamp_stopped is only used in INACTIVE state.) The reason for doing it like this is that it means that only counters being enabled or disabled at sched-in and sched-out time need to be updated. There are no new loops that iterate over all counters to update total_time_enabled or total_time_running. This also keeps separate child_total_time_running and child_total_time_enabled fields that get added in when reporting the totals to userspace. They are separate fields so that they can be atomic. We don't want to use atomics for total_time_running, total_time_enabled etc., because then we would have to use atomic sequences to update them, which are slower than regular arithmetic and memory accesses. It is possible to measure total_time_running by adding a task_clock counter to each group of counters, and total_time_enabled can be measured approximately with a top-level task_clock counter (though inaccuracies will creep in if you need to disable and enable groups since it is not possible in general to disable/enable the top-level task_clock counter simultaneously with another group). However, that adds extra overhead - I measured around 15% increase in the context switch latency reported by lat_ctx (from lmbench) when a task_clock counter was added to each of 2 groups, and around 25% increase when a task_clock counter was added to each of 4 groups. (In both cases a top-level task-clock counter was also added.) In contrast, the code added in this commit gives better information with no overhead that I could measure (in fact in some cases I measured lower times with this code, but the differences were all less than one standard deviation). [ v2: address review comments by Andrew Morton. ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 19:46:58 +08:00
/*
* These accumulate total time (in nanoseconds) that children
* counters have been enabled and running, respectively.
*/
atomic64_t child_total_time_enabled;
atomic64_t child_total_time_running;
/*
perf_counter: Add counter enable/disable ioctls Impact: New perf_counter features This primarily adds a way for perf_counter users to enable and disable counters and groups. Enabling or disabling a counter or group also enables or disables all of the child counters that have been cloned from it to monitor children of the task monitored by the top-level counter. The userspace interface to enable/disable counters is via ioctl on the counter file descriptor. Along the way this extends the code that handles child counters to handle child counter groups properly. A group with multiple counters will be cloned to child tasks if and only if the group leader has the hw_event.inherit bit set - if it is set the whole group is cloned as a group in the child task. In order to be able to enable or disable all child counters of a given top-level counter, we need a way to find them all. Hence I have added a child_list field to struct perf_counter, which is the head of the list of children for a top-level counter, or the link in that list for a child counter. That list is protected by the perf_counter.mutex field. This also adds a mutex to the perf_counter_context struct. Previously the list of counters was protected just by the lock field in the context, which meant that perf_counter_init_task had to take that lock and then take whatever lock/mutex protects the top-level counter's child_list. But the counter enable/disable functions need to take that lock in order to traverse the list, then for each counter take the lock in that counter's context in order to change the counter's state safely, which will lead to a deadlock. To solve this, we now have both a mutex and a spinlock in the context, and taking either is sufficient to ensure the list of counters can't change - you have to take both before changing the list. Now perf_counter_init_task takes the mutex instead of the lock (which incidentally means that inherit_counter can use GFP_KERNEL instead of GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new enable/disable functions can take the mutex while traversing the list of child counters without incurring a possible deadlock when the counter manipulation code locks the context for a child counter. We also had an misfeature that the first counter added to a context would possibly not go on until the next sched-in, because we were using ctx->nr_active to detect if the context was running on a CPU. But nr_active is the number of active counters, and if that was zero (because the context didn't have any counters yet) it would look like the context wasn't running on a cpu and so the retry code in __perf_install_in_context wouldn't retry. So this adds an 'is_active' field that is set when the context is on a CPU, even if it has no counters. The is_active field is only used for task contexts, not for per-cpu contexts. If we enable a subsidiary counter in a group that is active on a CPU, and the arch code can't enable the counter, then we have to pull the whole group off the CPU. We do this with group_sched_out, which gets moved up in the file so it comes before all its callers. This also adds similar logic to __perf_install_in_context so that the "all on, or none" invariant of groups is preserved when adding a new counter to a group. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 15:10:22 +08:00
* Protect attach/detach and child_list:
*/
struct mutex child_mutex;
struct list_head child_list;
struct perf_counter *parent;
int oncpu;
int cpu;
struct list_head owner_entry;
struct task_struct *owner;
/* mmap bits */
struct mutex mmap_mutex;
atomic_t mmap_count;
struct perf_mmap_data *data;
/* poll related */
wait_queue_head_t waitq;
struct fasync_struct *fasync;
/* delayed work for NMIs and such */
int pending_wakeup;
int pending_kill;
int pending_disable;
struct perf_pending_entry pending;
atomic_t event_limit;
void (*destroy)(struct perf_counter *);
struct rcu_head rcu_head;
struct pid_namespace *ns;
u64 id;
#endif
};
/**
* struct perf_counter_context - counter context structure
*
* Used as a container for task counters and CPU counters as well:
*/
struct perf_counter_context {
/*
perf_counter: Add counter enable/disable ioctls Impact: New perf_counter features This primarily adds a way for perf_counter users to enable and disable counters and groups. Enabling or disabling a counter or group also enables or disables all of the child counters that have been cloned from it to monitor children of the task monitored by the top-level counter. The userspace interface to enable/disable counters is via ioctl on the counter file descriptor. Along the way this extends the code that handles child counters to handle child counter groups properly. A group with multiple counters will be cloned to child tasks if and only if the group leader has the hw_event.inherit bit set - if it is set the whole group is cloned as a group in the child task. In order to be able to enable or disable all child counters of a given top-level counter, we need a way to find them all. Hence I have added a child_list field to struct perf_counter, which is the head of the list of children for a top-level counter, or the link in that list for a child counter. That list is protected by the perf_counter.mutex field. This also adds a mutex to the perf_counter_context struct. Previously the list of counters was protected just by the lock field in the context, which meant that perf_counter_init_task had to take that lock and then take whatever lock/mutex protects the top-level counter's child_list. But the counter enable/disable functions need to take that lock in order to traverse the list, then for each counter take the lock in that counter's context in order to change the counter's state safely, which will lead to a deadlock. To solve this, we now have both a mutex and a spinlock in the context, and taking either is sufficient to ensure the list of counters can't change - you have to take both before changing the list. Now perf_counter_init_task takes the mutex instead of the lock (which incidentally means that inherit_counter can use GFP_KERNEL instead of GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new enable/disable functions can take the mutex while traversing the list of child counters without incurring a possible deadlock when the counter manipulation code locks the context for a child counter. We also had an misfeature that the first counter added to a context would possibly not go on until the next sched-in, because we were using ctx->nr_active to detect if the context was running on a CPU. But nr_active is the number of active counters, and if that was zero (because the context didn't have any counters yet) it would look like the context wasn't running on a cpu and so the retry code in __perf_install_in_context wouldn't retry. So this adds an 'is_active' field that is set when the context is on a CPU, even if it has no counters. The is_active field is only used for task contexts, not for per-cpu contexts. If we enable a subsidiary counter in a group that is active on a CPU, and the arch code can't enable the counter, then we have to pull the whole group off the CPU. We do this with group_sched_out, which gets moved up in the file so it comes before all its callers. This also adds similar logic to __perf_install_in_context so that the "all on, or none" invariant of groups is preserved when adding a new counter to a group. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 15:10:22 +08:00
* Protect the states of the counters in the list,
* nr_active, and the list:
*/
spinlock_t lock;
perf_counter: Add counter enable/disable ioctls Impact: New perf_counter features This primarily adds a way for perf_counter users to enable and disable counters and groups. Enabling or disabling a counter or group also enables or disables all of the child counters that have been cloned from it to monitor children of the task monitored by the top-level counter. The userspace interface to enable/disable counters is via ioctl on the counter file descriptor. Along the way this extends the code that handles child counters to handle child counter groups properly. A group with multiple counters will be cloned to child tasks if and only if the group leader has the hw_event.inherit bit set - if it is set the whole group is cloned as a group in the child task. In order to be able to enable or disable all child counters of a given top-level counter, we need a way to find them all. Hence I have added a child_list field to struct perf_counter, which is the head of the list of children for a top-level counter, or the link in that list for a child counter. That list is protected by the perf_counter.mutex field. This also adds a mutex to the perf_counter_context struct. Previously the list of counters was protected just by the lock field in the context, which meant that perf_counter_init_task had to take that lock and then take whatever lock/mutex protects the top-level counter's child_list. But the counter enable/disable functions need to take that lock in order to traverse the list, then for each counter take the lock in that counter's context in order to change the counter's state safely, which will lead to a deadlock. To solve this, we now have both a mutex and a spinlock in the context, and taking either is sufficient to ensure the list of counters can't change - you have to take both before changing the list. Now perf_counter_init_task takes the mutex instead of the lock (which incidentally means that inherit_counter can use GFP_KERNEL instead of GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new enable/disable functions can take the mutex while traversing the list of child counters without incurring a possible deadlock when the counter manipulation code locks the context for a child counter. We also had an misfeature that the first counter added to a context would possibly not go on until the next sched-in, because we were using ctx->nr_active to detect if the context was running on a CPU. But nr_active is the number of active counters, and if that was zero (because the context didn't have any counters yet) it would look like the context wasn't running on a cpu and so the retry code in __perf_install_in_context wouldn't retry. So this adds an 'is_active' field that is set when the context is on a CPU, even if it has no counters. The is_active field is only used for task contexts, not for per-cpu contexts. If we enable a subsidiary counter in a group that is active on a CPU, and the arch code can't enable the counter, then we have to pull the whole group off the CPU. We do this with group_sched_out, which gets moved up in the file so it comes before all its callers. This also adds similar logic to __perf_install_in_context so that the "all on, or none" invariant of groups is preserved when adding a new counter to a group. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 15:10:22 +08:00
/*
* Protect the list of counters. Locking either mutex or lock
* is sufficient to ensure the list doesn't change; to change
* the list you need to lock both the mutex and the spinlock.
*/
struct mutex mutex;
struct list_head counter_list;
struct list_head event_list;
int nr_counters;
int nr_active;
perf_counter: Add counter enable/disable ioctls Impact: New perf_counter features This primarily adds a way for perf_counter users to enable and disable counters and groups. Enabling or disabling a counter or group also enables or disables all of the child counters that have been cloned from it to monitor children of the task monitored by the top-level counter. The userspace interface to enable/disable counters is via ioctl on the counter file descriptor. Along the way this extends the code that handles child counters to handle child counter groups properly. A group with multiple counters will be cloned to child tasks if and only if the group leader has the hw_event.inherit bit set - if it is set the whole group is cloned as a group in the child task. In order to be able to enable or disable all child counters of a given top-level counter, we need a way to find them all. Hence I have added a child_list field to struct perf_counter, which is the head of the list of children for a top-level counter, or the link in that list for a child counter. That list is protected by the perf_counter.mutex field. This also adds a mutex to the perf_counter_context struct. Previously the list of counters was protected just by the lock field in the context, which meant that perf_counter_init_task had to take that lock and then take whatever lock/mutex protects the top-level counter's child_list. But the counter enable/disable functions need to take that lock in order to traverse the list, then for each counter take the lock in that counter's context in order to change the counter's state safely, which will lead to a deadlock. To solve this, we now have both a mutex and a spinlock in the context, and taking either is sufficient to ensure the list of counters can't change - you have to take both before changing the list. Now perf_counter_init_task takes the mutex instead of the lock (which incidentally means that inherit_counter can use GFP_KERNEL instead of GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new enable/disable functions can take the mutex while traversing the list of child counters without incurring a possible deadlock when the counter manipulation code locks the context for a child counter. We also had an misfeature that the first counter added to a context would possibly not go on until the next sched-in, because we were using ctx->nr_active to detect if the context was running on a CPU. But nr_active is the number of active counters, and if that was zero (because the context didn't have any counters yet) it would look like the context wasn't running on a cpu and so the retry code in __perf_install_in_context wouldn't retry. So this adds an 'is_active' field that is set when the context is on a CPU, even if it has no counters. The is_active field is only used for task contexts, not for per-cpu contexts. If we enable a subsidiary counter in a group that is active on a CPU, and the arch code can't enable the counter, then we have to pull the whole group off the CPU. We do this with group_sched_out, which gets moved up in the file so it comes before all its callers. This also adds similar logic to __perf_install_in_context so that the "all on, or none" invariant of groups is preserved when adding a new counter to a group. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 15:10:22 +08:00
int is_active;
perf_counter: Dynamically allocate tasks' perf_counter_context struct This replaces the struct perf_counter_context in the task_struct with a pointer to a dynamically allocated perf_counter_context struct. The main reason for doing is this is to allow us to transfer a perf_counter_context from one task to another when we do lazy PMU switching in a later patch. This has a few side-benefits: the task_struct becomes a little smaller, we save some memory because only tasks that have perf_counters attached get a perf_counter_context allocated for them, and we can remove the inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't end up recompiling nearly everything whenever perf_counter.h changes. The perf_counter_context structures are reference-counted and freed when the last reference is dropped. A context can have references from its task and the counters on its task. Counters can outlive the task so it is possible that a context will be freed well after its task has exited. Contexts are allocated on fork if the parent had a context, or otherwise the first time that a per-task counter is created on a task. In the latter case, we set the context pointer in the task struct locklessly using an atomic compare-and-exchange operation in case we raced with some other task in creating a context for the subject task. This also removes the task pointer from the perf_counter struct. The task pointer was not used anywhere and would make it harder to move a context from one task to another. Anything that needed to know which task a counter was attached to was already using counter->ctx->task. The __perf_counter_init_context function moves up in perf_counter.c so that it can be called from find_get_context, and now initializes the refcount, but is otherwise unchanged. We were potentially calling list_del_counter twice: once from __perf_counter_exit_task when the task exits and once from __perf_counter_remove_from_context when the counter's fd gets closed. This adds a check in list_del_counter so it doesn't do anything if the counter has already been removed from the lists. Since perf_counter_task_sched_in doesn't do anything if the task doesn't have a context, and leaves cpuctx->task_ctx = NULL, this adds code to __perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in the case where the current task adds the first counter to itself and thus creates a context for itself. This also adds similar code to __perf_counter_enable to handle a similar situation which can arise when the counters have been disabled using prctl; that also leaves cpuctx->task_ctx = NULL. [ Impact: refactor counter context management to prepare for new feature ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 12:17:31 +08:00
atomic_t refcount;
struct task_struct *task;
perf_counter: record time running and time enabled for each counter Impact: new functionality Currently, if there are more counters enabled than can fit on the CPU, the kernel will multiplex the counters on to the hardware using round-robin scheduling. That isn't too bad for sampling counters, but for counting counters it means that the value read from a counter represents some unknown fraction of the true count of events that occurred while the counter was enabled. This remedies the situation by keeping track of how long each counter is enabled for, and how long it is actually on the cpu and counting events. These times are recorded in nanoseconds using the task clock for per-task counters and the cpu clock for per-cpu counters. These values can be supplied to userspace on a read from the counter. Userspace requests that they be supplied after the counter value by setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field when creating the counter. (There is no way to change the read format after the counter is created, though it would be possible to add some way to do that.) Using this information it is possible for userspace to scale the count it reads from the counter to get an estimate of the true count: true_count_estimate = count * total_time_enabled / total_time_running This also lets userspace detect the situation where the counter never got to go on the cpu: total_time_running == 0. This functionality has been requested by the PAPI developers, and will be generally needed for interpreting the count values from counting counters correctly. In the implementation, this keeps 5 time values (in nanoseconds) for each counter: total_time_enabled and total_time_running are used when the counter is in state OFF or ERROR and for reporting back to userspace. When the counter is in state INACTIVE or ACTIVE, it is the tstamp_enabled, tstamp_running and tstamp_stopped values that are relevant, and total_time_enabled and total_time_running are determined from them. (tstamp_stopped is only used in INACTIVE state.) The reason for doing it like this is that it means that only counters being enabled or disabled at sched-in and sched-out time need to be updated. There are no new loops that iterate over all counters to update total_time_enabled or total_time_running. This also keeps separate child_total_time_running and child_total_time_enabled fields that get added in when reporting the totals to userspace. They are separate fields so that they can be atomic. We don't want to use atomics for total_time_running, total_time_enabled etc., because then we would have to use atomic sequences to update them, which are slower than regular arithmetic and memory accesses. It is possible to measure total_time_running by adding a task_clock counter to each group of counters, and total_time_enabled can be measured approximately with a top-level task_clock counter (though inaccuracies will creep in if you need to disable and enable groups since it is not possible in general to disable/enable the top-level task_clock counter simultaneously with another group). However, that adds extra overhead - I measured around 15% increase in the context switch latency reported by lat_ctx (from lmbench) when a task_clock counter was added to each of 2 groups, and around 25% increase when a task_clock counter was added to each of 4 groups. (In both cases a top-level task-clock counter was also added.) In contrast, the code added in this commit gives better information with no overhead that I could measure (in fact in some cases I measured lower times with this code, but the differences were all less than one standard deviation). [ v2: address review comments by Andrew Morton. ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 19:46:58 +08:00
/*
* Context clock, runs when context enabled.
perf_counter: record time running and time enabled for each counter Impact: new functionality Currently, if there are more counters enabled than can fit on the CPU, the kernel will multiplex the counters on to the hardware using round-robin scheduling. That isn't too bad for sampling counters, but for counting counters it means that the value read from a counter represents some unknown fraction of the true count of events that occurred while the counter was enabled. This remedies the situation by keeping track of how long each counter is enabled for, and how long it is actually on the cpu and counting events. These times are recorded in nanoseconds using the task clock for per-task counters and the cpu clock for per-cpu counters. These values can be supplied to userspace on a read from the counter. Userspace requests that they be supplied after the counter value by setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field when creating the counter. (There is no way to change the read format after the counter is created, though it would be possible to add some way to do that.) Using this information it is possible for userspace to scale the count it reads from the counter to get an estimate of the true count: true_count_estimate = count * total_time_enabled / total_time_running This also lets userspace detect the situation where the counter never got to go on the cpu: total_time_running == 0. This functionality has been requested by the PAPI developers, and will be generally needed for interpreting the count values from counting counters correctly. In the implementation, this keeps 5 time values (in nanoseconds) for each counter: total_time_enabled and total_time_running are used when the counter is in state OFF or ERROR and for reporting back to userspace. When the counter is in state INACTIVE or ACTIVE, it is the tstamp_enabled, tstamp_running and tstamp_stopped values that are relevant, and total_time_enabled and total_time_running are determined from them. (tstamp_stopped is only used in INACTIVE state.) The reason for doing it like this is that it means that only counters being enabled or disabled at sched-in and sched-out time need to be updated. There are no new loops that iterate over all counters to update total_time_enabled or total_time_running. This also keeps separate child_total_time_running and child_total_time_enabled fields that get added in when reporting the totals to userspace. They are separate fields so that they can be atomic. We don't want to use atomics for total_time_running, total_time_enabled etc., because then we would have to use atomic sequences to update them, which are slower than regular arithmetic and memory accesses. It is possible to measure total_time_running by adding a task_clock counter to each group of counters, and total_time_enabled can be measured approximately with a top-level task_clock counter (though inaccuracies will creep in if you need to disable and enable groups since it is not possible in general to disable/enable the top-level task_clock counter simultaneously with another group). However, that adds extra overhead - I measured around 15% increase in the context switch latency reported by lat_ctx (from lmbench) when a task_clock counter was added to each of 2 groups, and around 25% increase when a task_clock counter was added to each of 4 groups. (In both cases a top-level task-clock counter was also added.) In contrast, the code added in this commit gives better information with no overhead that I could measure (in fact in some cases I measured lower times with this code, but the differences were all less than one standard deviation). [ v2: address review comments by Andrew Morton. ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 19:46:58 +08:00
*/
u64 time;
u64 timestamp;
perf_counter: Optimize context switch between identical inherited contexts When monitoring a process and its descendants with a set of inherited counters, we can often get the situation in a context switch where both the old (outgoing) and new (incoming) process have the same set of counters, and their values are ultimately going to be added together. In that situation it doesn't matter which set of counters are used to count the activity for the new process, so there is really no need to go through the process of reading the hardware counters and updating the old task's counters and then setting up the PMU for the new task. This optimizes the context switch in this situation. Instead of scheduling out the perf_counter_context for the old task and scheduling in the new context, we simply transfer the old context to the new task and keep using it without interruption. The new context gets transferred to the old task. This means that both tasks still have a valid perf_counter_context, so no special case is introduced when the old task gets scheduled in again, either on this CPU or another CPU. The equivalence of contexts is detected by keeping a pointer in each cloned context pointing to the context it was cloned from. To cope with the situation where a context is changed by adding or removing counters after it has been cloned, we also keep a generation number on each context which is incremented every time a context is changed. When a context is cloned we take a copy of the parent's generation number, and two cloned contexts are equivalent only if they have the same parent and the same generation number. In order that the parent context pointer remains valid (and is not reused), we increment the parent context's reference count for each context cloned from it. Since we don't have individual fds for the counters in a cloned context, the only thing that can make two clones of a given parent different after they have been cloned is enabling or disabling all counters with prctl. To account for this, we keep a count of the number of enabled counters in each context. Two contexts must have the same number of enabled counters to be considered equivalent. Here are some measurements of the context switch time as measured with the lat_ctx benchmark from lmbench, comparing the times obtained with and without this patch series: -----Unmodified----- With this patch series Counters: none 2 HW 4H+4S none 2 HW 4H+4S 2 processes: Average 3.44 6.45 11.24 3.12 3.39 3.60 St dev 0.04 0.04 0.13 0.05 0.17 0.19 8 processes: Average 6.45 8.79 14.00 5.57 6.23 7.57 St dev 1.27 1.04 0.88 1.42 1.46 1.42 32 processes: Average 5.56 8.43 13.78 5.28 5.55 7.15 St dev 0.41 0.47 0.53 0.54 0.57 0.81 The numbers are the mean and standard deviation of 20 runs of lat_ctx. The "none" columns are lat_ctx run directly without any counters. The "2 HW" columns are with lat_ctx run under perfstat, counting cycles and instructions. The "4H+4S" columns are lat_ctx run under perfstat with 4 hardware counters and 4 software counters (cycles, instructions, cache references, cache misses, task clock, context switch, cpu migrations, and page faults). [ Impact: performance optimization of counter context-switches ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18966.10666.517218.332164@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 12:27:22 +08:00
/*
* These fields let us detect when two contexts have both
* been cloned (inherited) from a common ancestor.
*/
struct perf_counter_context *parent_ctx;
perf_counter: Fix race in attaching counters to tasks and exiting Commit 564c2b21 ("perf_counter: Optimize context switch between identical inherited contexts") introduced a race where it is possible that a counter being attached to a task could get attached to the wrong task, if the task is one that has inherited its context from another task via fork. This happens because the optimized context switch could switch the context to another task after find_get_context has read task->perf_counter_ctxp. In fact, it's possible that the context could then get freed, if the other task then exits. This fixes the problem by protecting both the context switch and the critical code in find_get_context with spinlocks. The context switch locks the cxt->lock of both the outgoing and incoming contexts before swapping them. That means that once code such as find_get_context has obtained the spinlock for the context associated with a task, the context can't get swapped to another task. However, the context may have been swapped in the interval between reading task->perf_counter_ctxp and getting the lock, so it is necessary to check and retry. To make sure that none of the contexts being looked at in find_get_context can get freed, this changes the context freeing code to use RCU. Thus an rcu_read_lock() is sufficient to ensure that no contexts can get freed. This part of the patch is lifted from a patch posted by Peter Zijlstra. This also adds a check to make sure that we can't add a counter to a task that is exiting. There is also a race between perf_counter_exit_task and find_get_context; this solves the race by moving the get_ctx that was in perf_counter_alloc into the locked region in find_get_context, so that once find_get_context has got the context for a task, it won't get freed even if the task calls perf_counter_exit_task. It doesn't matter if new top-level (non-inherited) counters get attached to the context after perf_counter_exit_task has detached the context from the task. They will just stay there and never get scheduled in until the counters' fds get closed, and then perf_release will remove them from the context and eventually free the context. With this, we are now doing the unclone in find_get_context rather than when a counter was added to or removed from a context (actually, we were missing the unclone_ctx() call when adding a counter to a context). We don't need to unclone when removing a counter from a context because we have no way to remove a counter from a cloned context. This also takes out the smp_wmb() in find_get_context, which Peter Zijlstra pointed out was unnecessary because the cmpxchg implies a full barrier anyway. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <18974.33033.667187.273886@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-28 20:18:17 +08:00
u64 parent_gen;
u64 generation;
int pin_count;
perf_counter: Fix race in attaching counters to tasks and exiting Commit 564c2b21 ("perf_counter: Optimize context switch between identical inherited contexts") introduced a race where it is possible that a counter being attached to a task could get attached to the wrong task, if the task is one that has inherited its context from another task via fork. This happens because the optimized context switch could switch the context to another task after find_get_context has read task->perf_counter_ctxp. In fact, it's possible that the context could then get freed, if the other task then exits. This fixes the problem by protecting both the context switch and the critical code in find_get_context with spinlocks. The context switch locks the cxt->lock of both the outgoing and incoming contexts before swapping them. That means that once code such as find_get_context has obtained the spinlock for the context associated with a task, the context can't get swapped to another task. However, the context may have been swapped in the interval between reading task->perf_counter_ctxp and getting the lock, so it is necessary to check and retry. To make sure that none of the contexts being looked at in find_get_context can get freed, this changes the context freeing code to use RCU. Thus an rcu_read_lock() is sufficient to ensure that no contexts can get freed. This part of the patch is lifted from a patch posted by Peter Zijlstra. This also adds a check to make sure that we can't add a counter to a task that is exiting. There is also a race between perf_counter_exit_task and find_get_context; this solves the race by moving the get_ctx that was in perf_counter_alloc into the locked region in find_get_context, so that once find_get_context has got the context for a task, it won't get freed even if the task calls perf_counter_exit_task. It doesn't matter if new top-level (non-inherited) counters get attached to the context after perf_counter_exit_task has detached the context from the task. They will just stay there and never get scheduled in until the counters' fds get closed, and then perf_release will remove them from the context and eventually free the context. With this, we are now doing the unclone in find_get_context rather than when a counter was added to or removed from a context (actually, we were missing the unclone_ctx() call when adding a counter to a context). We don't need to unclone when removing a counter from a context because we have no way to remove a counter from a cloned context. This also takes out the smp_wmb() in find_get_context, which Peter Zijlstra pointed out was unnecessary because the cmpxchg implies a full barrier anyway. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <18974.33033.667187.273886@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-28 20:18:17 +08:00
struct rcu_head rcu_head;
};
/**
* struct perf_counter_cpu_context - per cpu counter context structure
*/
struct perf_cpu_context {
struct perf_counter_context ctx;
struct perf_counter_context *task_ctx;
int active_oncpu;
int max_pertask;
perf_counter: Add support for pinned and exclusive counter groups Impact: New perf_counter features A pinned counter group is one that the user wants to have on the CPU whenever possible, i.e. whenever the associated task is running, for a per-task group, or always for a per-cpu group. If the system cannot satisfy that, it puts the group into an error state where it is not scheduled any more and reads from it return EOF (i.e. 0 bytes read). The group can be released from error state and made readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we have finer-grained enable/disable controls on counters we'll be able to reset the error state on individual groups. An exclusive group is one that the user wants to be the only group using the CPU performance monitor hardware whenever it is on. The counter group scheduler will not schedule an exclusive group if there are already other groups on the CPU and will not schedule other groups onto the CPU if there is an exclusive group scheduled (that statement does not apply to groups containing only software counters, which can always go on and which do not prevent an exclusive group from going on). With an exclusive group, we will be able to let users program PMU registers at a low level without the concern that those settings will perturb other measurements. Along the way this reorganizes things a little: - is_software_counter() is moved to perf_counter.h. - cpuctx->active_oncpu now records the number of hardware counters on the CPU, i.e. it now excludes software counters. Nothing was reading cpuctx->active_oncpu before, so this change is harmless. - A new cpuctx->exclusive field records whether we currently have an exclusive group on the CPU. - counter_sched_out moves higher up in perf_counter.c and gets called from __perf_counter_remove_from_context and __perf_counter_exit_task, where we used to have essentially the same code. - __perf_counter_sched_in now goes through the counter list twice, doing the pinned counters in the first loop and the non-pinned counters in the second loop, in order to give the pinned counters the best chance to be scheduled in. Note that only a group leader can be exclusive or pinned, and that attribute applies to the whole group. This avoids some awkwardness in some corner cases (e.g. where a group leader is closed and the other group members get added to the context list). If we want to relax that restriction later, we can, and it is easier to relax a restriction than to apply a new one. This doesn't yet handle the case where a pinned counter is inherited and goes into error state in the child - the error state is not propagated up to the parent when the child exits, and arguably it should. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 18:00:30 +08:00
int exclusive;
/*
* Recursion avoidance:
*
* task, softirq, irq, nmi context
*/
int recursion[4];
};
#ifdef CONFIG_PERF_COUNTERS
/*
* Set by architecture code:
*/
extern int perf_max_counters;
extern const struct pmu *hw_perf_counter_init(struct perf_counter *counter);
extern void perf_counter_task_sched_in(struct task_struct *task, int cpu);
perf_counter: Optimize context switch between identical inherited contexts When monitoring a process and its descendants with a set of inherited counters, we can often get the situation in a context switch where both the old (outgoing) and new (incoming) process have the same set of counters, and their values are ultimately going to be added together. In that situation it doesn't matter which set of counters are used to count the activity for the new process, so there is really no need to go through the process of reading the hardware counters and updating the old task's counters and then setting up the PMU for the new task. This optimizes the context switch in this situation. Instead of scheduling out the perf_counter_context for the old task and scheduling in the new context, we simply transfer the old context to the new task and keep using it without interruption. The new context gets transferred to the old task. This means that both tasks still have a valid perf_counter_context, so no special case is introduced when the old task gets scheduled in again, either on this CPU or another CPU. The equivalence of contexts is detected by keeping a pointer in each cloned context pointing to the context it was cloned from. To cope with the situation where a context is changed by adding or removing counters after it has been cloned, we also keep a generation number on each context which is incremented every time a context is changed. When a context is cloned we take a copy of the parent's generation number, and two cloned contexts are equivalent only if they have the same parent and the same generation number. In order that the parent context pointer remains valid (and is not reused), we increment the parent context's reference count for each context cloned from it. Since we don't have individual fds for the counters in a cloned context, the only thing that can make two clones of a given parent different after they have been cloned is enabling or disabling all counters with prctl. To account for this, we keep a count of the number of enabled counters in each context. Two contexts must have the same number of enabled counters to be considered equivalent. Here are some measurements of the context switch time as measured with the lat_ctx benchmark from lmbench, comparing the times obtained with and without this patch series: -----Unmodified----- With this patch series Counters: none 2 HW 4H+4S none 2 HW 4H+4S 2 processes: Average 3.44 6.45 11.24 3.12 3.39 3.60 St dev 0.04 0.04 0.13 0.05 0.17 0.19 8 processes: Average 6.45 8.79 14.00 5.57 6.23 7.57 St dev 1.27 1.04 0.88 1.42 1.46 1.42 32 processes: Average 5.56 8.43 13.78 5.28 5.55 7.15 St dev 0.41 0.47 0.53 0.54 0.57 0.81 The numbers are the mean and standard deviation of 20 runs of lat_ctx. The "none" columns are lat_ctx run directly without any counters. The "2 HW" columns are with lat_ctx run under perfstat, counting cycles and instructions. The "4H+4S" columns are lat_ctx run under perfstat with 4 hardware counters and 4 software counters (cycles, instructions, cache references, cache misses, task clock, context switch, cpu migrations, and page faults). [ Impact: performance optimization of counter context-switches ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18966.10666.517218.332164@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 12:27:22 +08:00
extern void perf_counter_task_sched_out(struct task_struct *task,
struct task_struct *next, int cpu);
extern void perf_counter_task_tick(struct task_struct *task, int cpu);
extern int perf_counter_init_task(struct task_struct *child);
extern void perf_counter_exit_task(struct task_struct *child);
extern void perf_counter_free_task(struct task_struct *task);
extern void perf_counter_do_pending(void);
extern void perf_counter_print_debug(void);
extern void __perf_disable(void);
extern bool __perf_enable(void);
extern void perf_disable(void);
extern void perf_enable(void);
extern int perf_counter_task_disable(void);
extern int perf_counter_task_enable(void);
extern int hw_perf_group_sched_in(struct perf_counter *group_leader,
struct perf_cpu_context *cpuctx,
struct perf_counter_context *ctx, int cpu);
extern void perf_counter_update_userpage(struct perf_counter *counter);
extern int perf_counter_overflow(struct perf_counter *counter,
int nmi, struct pt_regs *regs, u64 addr);
perf_counter: Add support for pinned and exclusive counter groups Impact: New perf_counter features A pinned counter group is one that the user wants to have on the CPU whenever possible, i.e. whenever the associated task is running, for a per-task group, or always for a per-cpu group. If the system cannot satisfy that, it puts the group into an error state where it is not scheduled any more and reads from it return EOF (i.e. 0 bytes read). The group can be released from error state and made readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we have finer-grained enable/disable controls on counters we'll be able to reset the error state on individual groups. An exclusive group is one that the user wants to be the only group using the CPU performance monitor hardware whenever it is on. The counter group scheduler will not schedule an exclusive group if there are already other groups on the CPU and will not schedule other groups onto the CPU if there is an exclusive group scheduled (that statement does not apply to groups containing only software counters, which can always go on and which do not prevent an exclusive group from going on). With an exclusive group, we will be able to let users program PMU registers at a low level without the concern that those settings will perturb other measurements. Along the way this reorganizes things a little: - is_software_counter() is moved to perf_counter.h. - cpuctx->active_oncpu now records the number of hardware counters on the CPU, i.e. it now excludes software counters. Nothing was reading cpuctx->active_oncpu before, so this change is harmless. - A new cpuctx->exclusive field records whether we currently have an exclusive group on the CPU. - counter_sched_out moves higher up in perf_counter.c and gets called from __perf_counter_remove_from_context and __perf_counter_exit_task, where we used to have essentially the same code. - __perf_counter_sched_in now goes through the counter list twice, doing the pinned counters in the first loop and the non-pinned counters in the second loop, in order to give the pinned counters the best chance to be scheduled in. Note that only a group leader can be exclusive or pinned, and that attribute applies to the whole group. This avoids some awkwardness in some corner cases (e.g. where a group leader is closed and the other group members get added to the context list). If we want to relax that restriction later, we can, and it is easier to relax a restriction than to apply a new one. This doesn't yet handle the case where a pinned counter is inherited and goes into error state in the child - the error state is not propagated up to the parent when the child exits, and arguably it should. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 18:00:30 +08:00
/*
* Return 1 for a software counter, 0 for a hardware counter
*/
static inline int is_software_counter(struct perf_counter *counter)
{
return !perf_event_raw(&counter->hw_event) &&
perf_event_type(&counter->hw_event) != PERF_TYPE_HARDWARE;
perf_counter: Add support for pinned and exclusive counter groups Impact: New perf_counter features A pinned counter group is one that the user wants to have on the CPU whenever possible, i.e. whenever the associated task is running, for a per-task group, or always for a per-cpu group. If the system cannot satisfy that, it puts the group into an error state where it is not scheduled any more and reads from it return EOF (i.e. 0 bytes read). The group can be released from error state and made readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we have finer-grained enable/disable controls on counters we'll be able to reset the error state on individual groups. An exclusive group is one that the user wants to be the only group using the CPU performance monitor hardware whenever it is on. The counter group scheduler will not schedule an exclusive group if there are already other groups on the CPU and will not schedule other groups onto the CPU if there is an exclusive group scheduled (that statement does not apply to groups containing only software counters, which can always go on and which do not prevent an exclusive group from going on). With an exclusive group, we will be able to let users program PMU registers at a low level without the concern that those settings will perturb other measurements. Along the way this reorganizes things a little: - is_software_counter() is moved to perf_counter.h. - cpuctx->active_oncpu now records the number of hardware counters on the CPU, i.e. it now excludes software counters. Nothing was reading cpuctx->active_oncpu before, so this change is harmless. - A new cpuctx->exclusive field records whether we currently have an exclusive group on the CPU. - counter_sched_out moves higher up in perf_counter.c and gets called from __perf_counter_remove_from_context and __perf_counter_exit_task, where we used to have essentially the same code. - __perf_counter_sched_in now goes through the counter list twice, doing the pinned counters in the first loop and the non-pinned counters in the second loop, in order to give the pinned counters the best chance to be scheduled in. Note that only a group leader can be exclusive or pinned, and that attribute applies to the whole group. This avoids some awkwardness in some corner cases (e.g. where a group leader is closed and the other group members get added to the context list). If we want to relax that restriction later, we can, and it is easier to relax a restriction than to apply a new one. This doesn't yet handle the case where a pinned counter is inherited and goes into error state in the child - the error state is not propagated up to the parent when the child exits, and arguably it should. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 18:00:30 +08:00
}
extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
extern void perf_counter_mmap(unsigned long addr, unsigned long len,
unsigned long pgoff, struct file *file);
extern void perf_counter_munmap(unsigned long addr, unsigned long len,
unsigned long pgoff, struct file *file);
extern void perf_counter_comm(struct task_struct *tsk);
extern void perf_counter_task_migration(struct task_struct *task, int cpu);
#define MAX_STACK_DEPTH 255
struct perf_callchain_entry {
u16 nr, hv, kernel, user;
u64 ip[MAX_STACK_DEPTH];
};
extern struct perf_callchain_entry *perf_callchain(struct pt_regs *regs);
extern int sysctl_perf_counter_priv;
extern int sysctl_perf_counter_mlock;
extern int sysctl_perf_counter_limit;
extern void perf_counter_init(void);
perf_counter: allow arch to supply event misc flags and instruction pointer At present the values we put in overflow events for the misc flags indicating processor mode and the instruction pointer are obtained using the standard user_mode() and instruction_pointer() functions. Those functions tell you where the performance monitor interrupt was taken, which might not be exactly where the counter overflow occurred, for example because interrupts were disabled at the point where the overflow occurred, or because the processor had many instructions in flight and chose to complete some more instructions beyond the one that caused the counter overflow. Some architectures (e.g. powerpc) can supply more precise information about where the counter overflow occurred and the processor mode at that point. This introduces new functions, perf_misc_flags() and perf_instruction_pointer(), which arch code can override to provide more precise information if available. They have default implementations which are identical to the existing code. This also adds a new misc flag value, PERF_EVENT_MISC_HYPERVISOR, for the case where a counter overflow occurred in the hypervisor. We encode the processor mode in the 2 bits previously used to indicate user or kernel mode; the values for user and kernel mode are unchanged and hypervisor mode is indicated by both bits being set. [ Impact: generalize perfcounter core facilities ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18956.1272.818511.561835@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-14 19:48:08 +08:00
#ifndef perf_misc_flags
#define perf_misc_flags(regs) (user_mode(regs) ? PERF_EVENT_MISC_USER : \
PERF_EVENT_MISC_KERNEL)
#define perf_instruction_pointer(regs) instruction_pointer(regs)
#endif
#else
static inline void
perf_counter_task_sched_in(struct task_struct *task, int cpu) { }
static inline void
perf_counter_task_sched_out(struct task_struct *task,
struct task_struct *next, int cpu) { }
static inline void
perf_counter_task_tick(struct task_struct *task, int cpu) { }
static inline int perf_counter_init_task(struct task_struct *child) { return 0; }
static inline void perf_counter_exit_task(struct task_struct *child) { }
static inline void perf_counter_free_task(struct task_struct *task) { }
static inline void perf_counter_do_pending(void) { }
static inline void perf_counter_print_debug(void) { }
static inline void perf_disable(void) { }
static inline void perf_enable(void) { }
static inline int perf_counter_task_disable(void) { return -EINVAL; }
static inline int perf_counter_task_enable(void) { return -EINVAL; }
static inline void
perf_swcounter_event(u32 event, u64 nr, int nmi,
struct pt_regs *regs, u64 addr) { }
static inline void
perf_counter_mmap(unsigned long addr, unsigned long len,
unsigned long pgoff, struct file *file) { }
static inline void
perf_counter_munmap(unsigned long addr, unsigned long len,
unsigned long pgoff, struct file *file) { }
static inline void perf_counter_comm(struct task_struct *tsk) { }
static inline void perf_counter_init(void) { }
static inline void perf_counter_task_migration(struct task_struct *task,
int cpu) { }
#endif
#endif /* __KERNEL__ */
#endif /* _LINUX_PERF_COUNTER_H */