renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
Code
82a470f111
linux-next/include/linux/msi.h

85 lines
2.6 KiB
C
Raw Normal View History

[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
#ifndef LINUX_MSI_H
#define LINUX_MSI_H
PCI/sysfs: add per pci device msi[x] irq listing (v5) This patch adds a per-pci-device subdirectory in sysfs called: /sys/bus/pci/devices/<device>/msi_irqs This sub-directory exports the set of msi vectors allocated by a given pci device, by creating a numbered sub-directory for each vector beneath msi_irqs. For each vector various attributes can be exported. Currently the only attribute is called mode, which tracks the operational mode of that vector (msi vs. msix) Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-07 02:08:18 +08:00
#include <linux/kobject.h>
MSI: Use a list instead of the custom link structure The msi descriptors are linked together with what looks a lot like a linked list, but isn't a struct list_head list. Make it one. The only complication is that previously we walked a list of irqs, and got the descriptor for each with get_irq_msi(). Now we have a list of descriptors and need to get the irq out of it, so it needs to be in the actual struct msi_desc. We use 0 to indicate no irq is setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-05 15:19:10 +08:00
#include <linux/list.h>
[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
struct msi_msg {
u32 address_lo; /* low 32 bits of msi message address */
u32 address_hi; /* high 32 bits of msi message address */
u32 data; /* 16 bits of msi message data */
};
PCI: cleanup MSI code Cleanup MSI code as follows: - fix some types - fix strange local variable definition - delete unnecessary blank line - add comment to #endif which is far from corresponding #ifdef Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-18 12:50:05 +08:00
/* Helper functions */
pci: Convert msi to new irq_chip functions Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <linux@arm.linux.org.uk>
2010-09-28 22:46:51 +08:00
struct irq_data;
pci: Cleanup the irq_desc mess in msi Handing down irq_desc to msi just so that msi can access irq_desc.irq_data.msi_desc is a pretty stupid idea. The calling code can hand down a pointer to msi_desc so msi code does not need to know about the irq descriptor at all. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-29 01:09:51 +08:00
struct msi_desc;
PCI: Remove "extern" from function declarations We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-19 00:55:46 +08:00
void mask_msi_irq(struct irq_data *data);
void unmask_msi_irq(struct irq_data *data);
void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
void __get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
void read_msi_msg(unsigned int irq, struct msi_msg *msg);
void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg);
void write_msi_msg(unsigned int irq, struct msi_msg *msg);
[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
struct msi_desc {
struct {
PCI MSI: Replace 'type' with 'is_msix' By changing from a 5-bit field to a 1-bit field, we free up some bits that can be used by a later patch. Also rearrange the fields for better packing on 64-bit platforms (reducing the size of msi_desc from 72 bytes to 64 bytes). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-17 20:54:06 +08:00
__u8 is_msix : 1;
PCI/MSI: Cache Multiple Message Capable in struct msi_desc The Multiple Message Capable field in the MSI Message Control register indicates how many vectors the device supports. This field is read-only, so cache it in msi_desc to avoid reading it repeatedly. Since we cache the extracted field (not the entire Message Control register), we can use msi_mask() instead of msi_capable_mask(), which is then unused, so remove it. [bhelgaas: fix whitespace, changelog] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-19 16:30:30 +08:00
__u8 multiple: 3; /* log2 num of messages allocated */
__u8 multi_cap : 3; /* log2 num of messages supported */
PCI: Fix whitespace, capitalization, and spelling errors Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-15 02:28:18 +08:00
__u8 maskbit : 1; /* mask-pending bit supported ? */
__u8 is_64 : 1; /* Address size: 0=32bit 1=64bit */
__u8 pos; /* Location of the msi capability */
__u16 entry_nr; /* specific enabled entry */
unsigned default_irq; /* default pre-assigned irq */
PCI MSI: Refactor interrupt masking code Since most of the callers already know whether they have an MSI or an MSI-X capability, split msi_set_mask_bits() into msi_mask_irq() and msix_mask_irq(). The only callers which don't (mask_msi_irq() and unmask_msi_irq()) can share code in msi_set_mask_bit(). This then becomes the only caller of msix_flush_writes(), so we can inline it. The flushing read can be to any address that belongs to the device, so we can eliminate the calculation too. We can also get rid of maskbits_mask from struct msi_desc and simply recalculate it on the rare occasion that we need it. The single-bit 'masked' element is replaced by a copy of the 32-bit 'masked' register, so this patch does not affect the size of msi_desc. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-17 20:54:09 +08:00
} msi_attrib;
[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
PCI MSI: Refactor interrupt masking code Since most of the callers already know whether they have an MSI or an MSI-X capability, split msi_set_mask_bits() into msi_mask_irq() and msix_mask_irq(). The only callers which don't (mask_msi_irq() and unmask_msi_irq()) can share code in msi_set_mask_bit(). This then becomes the only caller of msix_flush_writes(), so we can inline it. The flushing read can be to any address that belongs to the device, so we can eliminate the calculation too. We can also get rid of maskbits_mask from struct msi_desc and simply recalculate it on the rare occasion that we need it. The single-bit 'masked' element is replaced by a copy of the 32-bit 'masked' register, so this patch does not affect the size of msi_desc. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-17 20:54:09 +08:00
u32 masked; /* mask bits */
MSI: Use a list instead of the custom link structure The msi descriptors are linked together with what looks a lot like a linked list, but isn't a struct list_head list. Make it one. The only complication is that previously we walked a list of irqs, and got the descriptor for each with get_irq_msi(). Now we have a list of descriptors and need to get the irq out of it, so it needs to be in the actual struct msi_desc. We use 0 to indicate no irq is setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-05 15:19:10 +08:00
unsigned int irq;
PCI: Allocate only as many MSI vectors as requested by driver Because of the encoding of the "Multiple Message Capable" and "Multiple Message Enable" fields, a device can only advertise that it's capable of a power-of-two number of vectors, and the OS can only enable a power-of-two number. For example, a device that's limited internally to using 18 vectors would have to advertise that it's capable of 32. The 14 extra vectors consume vector numbers and IRQ descriptors even though the device can't actually use them. This fix introduces a 'msi_desc::nvec_used' field to address this issue. When non-zero, it is the actual number of MSIs the device will send, as requested by the device driver. This value should be used by architectures to set up and tear down only as many interrupt resources as the device will actually use. Note, although the existing 'msi_desc::multiple' field might seem redundant, in fact it is not. The number of MSIs advertised need not be the smallest power-of-two larger than the number of MSIs the device will send. Thus, it is not always possible to derive the former from the latter, so we need to keep them both to handle this case. [bhelgaas: changelog, rename to "nvec_used"] Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-13 17:05:48 +08:00
unsigned int nvec_used; /* number of messages */
MSI: Use a list instead of the custom link structure The msi descriptors are linked together with what looks a lot like a linked list, but isn't a struct list_head list. Make it one. The only complication is that previously we walked a list of irqs, and got the descriptor for each with get_irq_msi(). Now we have a list of descriptors and need to get the irq out of it, so it needs to be in the actual struct msi_desc. We use 0 to indicate no irq is setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-05 15:19:10 +08:00
struct list_head list;
[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
PCI MSI: Use mask_pos instead of mask_base when appropriate MSI interrupts have a mask_pos where MSI-X have a mask_base. Use a transparent union to get rid of some ugly casts. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-17 20:54:08 +08:00
union {
void __iomem *mask_base;
u8 mask_pos;
};
[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
struct pci_dev *dev;
[PATCH] msi: Safer state caching. There are two ways pci_save_state and pci_restore_state are used. As helper functions during suspend/resume, and as helper functions around a hardware reset event. When used as helper functions around a hardware reset event there is no reason to believe the calls will be paired, nor is there a good reason to believe that if we restore the msi state from before the reset that it will match the current msi state. Since arch code may change the msi message without going through the driver, drivers currently do not have enough information to even know when to call pci_save_state to ensure they will have msi state in sync with the other kernel irq reception data structures. It turns out the solution is straight forward, cache the state in the existing msi data structures (not the magic pci saved things) and have the msi code update the cached state each time we write to the hardware. This means we never need to read the hardware to figure out what the hardware state should be. By modifying the caching in this manner we get to remove our save_state routines and only need to provide restore_state routines. The only fields that were at all tricky to regenerate were the msi and msi-x control registers and the way we regenerate them currently is a bit dependent upon assumptions on how we use the allow msi registers to be configured and used making the code a little bit brittle. If we ever change what cases we allow or how we configure the msi bits we can address the fragility then. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-09 04:04:57 +08:00
/* Last set MSI message */
struct msi_msg msg;
PCI/sysfs: add per pci device msi[x] irq listing (v5) This patch adds a per-pci-device subdirectory in sysfs called: /sys/bus/pci/devices/<device>/msi_irqs This sub-directory exports the set of msi vectors allocated by a given pci device, by creating a numbered sub-directory for each vector beneath msi_irqs. For each vector various attributes can be exported. Currently the only attribute is called mode, which tracks the operational mode of that vector (msi vs. msix) Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-07 02:08:18 +08:00
struct kobject kobj;
[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
};
/*
PCI: use weak functions for MSI arch-specific functions Until now, the MSI architecture-specific functions could be overloaded using a fairly complex set of #define and compile-time conditionals. In order to prepare for the introduction of the msi_chip infrastructure, it is desirable to switch all those functions to use the 'weak' mechanism. This commit converts all the architectures that were overidding those MSI functions to use the new strategy. Note that we keep two separate, non-weak, functions default_teardown_msi_irqs() and default_restore_msi_irqs() for the default behavior of the arch_teardown_msi_irqs() and arch_restore_msi_irqs(), as the default behavior is needed by x86 PCI code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Daniel Price <daniel.price@gmail.com> Tested-by: Thierry Reding <thierry.reding@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-10 04:27:06 +08:00
* The arch hooks to setup up msi irqs. Those functions are
* implemented as weak symbols so that they /can/ be overriden by
* architecture specific code if needed.
[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
*/
msi: Make MSI useable more architectures The arch hooks arch_setup_msi_irq and arch_teardown_msi_irq are now responsible for allocating and freeing the linux irq in addition to setting up the the linux irq to work with the interrupt. arch_setup_msi_irq now takes a pci_device and a msi_desc and returns an irq. With this change in place this code should be useable by all platforms except those that won't let the OS touch the hardware like ppc RTAS. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-29 03:56:37 +08:00
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
void arch_teardown_msi_irq(unsigned int irq);
PCI: Remove "extern" from function declarations We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-19 00:55:46 +08:00
int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
void arch_teardown_msi_irqs(struct pci_dev *dev);
int arch_msi_check_device(struct pci_dev* dev, int nvec, int type);
PCI: Drop "irq" param from *_restore_msi_irqs() Change x86_msi.restore_msi_irqs(struct pci_dev *dev, int irq) to x86_msi.restore_msi_irqs(struct pci_dev *dev). restore_msi_irqs() restores multiple MSI-X IRQs, so param 'int irq' is unneeded. This makes code more consistent between vm and bare metal. Dom0 MSI-X restore code can also be optimized as XEN only has a hypercall to restore all MSI-X vectors at one time. Tested-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-12-04 13:09:16 +08:00
void arch_restore_msi_irqs(struct pci_dev *dev);
PCI: use weak functions for MSI arch-specific functions Until now, the MSI architecture-specific functions could be overloaded using a fairly complex set of #define and compile-time conditionals. In order to prepare for the introduction of the msi_chip infrastructure, it is desirable to switch all those functions to use the 'weak' mechanism. This commit converts all the architectures that were overidding those MSI functions to use the new strategy. Note that we keep two separate, non-weak, functions default_teardown_msi_irqs() and default_restore_msi_irqs() for the default behavior of the arch_teardown_msi_irqs() and arch_restore_msi_irqs(), as the default behavior is needed by x86 PCI code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Daniel Price <daniel.price@gmail.com> Tested-by: Thierry Reding <thierry.reding@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-10 04:27:06 +08:00
void default_teardown_msi_irqs(struct pci_dev *dev);
PCI: Drop "irq" param from *_restore_msi_irqs() Change x86_msi.restore_msi_irqs(struct pci_dev *dev, int irq) to x86_msi.restore_msi_irqs(struct pci_dev *dev). restore_msi_irqs() restores multiple MSI-X IRQs, so param 'int irq' is unneeded. This makes code more consistent between vm and bare metal. Dom0 MSI-X restore code can also be optimized as XEN only has a hypercall to restore all MSI-X vectors at one time. Tested-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-12-04 13:09:16 +08:00
void default_restore_msi_irqs(struct pci_dev *dev);
PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq() Certain platforms do not allow writes in the MSI-X BARs to setup or tear down vector values. To combat against the generic code trying to write to that and either silently being ignored or crashing due to the pagetables being marked R/O this patch introduces a platform override. Note that we keep two separate, non-weak, functions default_mask_msi_irqs() and default_mask_msix_irqs() for the behavior of the arch_mask_msi_irqs() and arch_mask_msix_irqs(), as the default behavior is needed by x86 PCI code. For Xen, which does not allow the guest to write to MSI-X tables - as the hypervisor is solely responsible for setting the vector values - we implement two nops. This fixes a Xen guest crash when passing a PCI device with MSI-X to the guest. See the bugzilla for more details. [bhelgaas: add bugzilla info] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=64581 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> CC: Zhenzhong Duan <zhenzhong.duan@oracle.com>
2013-11-07 05:16:56 +08:00
u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
PCI: Introduce new MSI chip infrastructure The new struct msi_chip is used to associated an MSI controller with a PCI bus. It is automatically handed down from the root to its children during bus enumeration. This patch provides default (weak) implementations for the architecture- specific MSI functions (arch_setup_msi_irq(), arch_teardown_msi_irq() and arch_msi_check_device()) which check if a PCI device's bus has an attached MSI chip and forward the call appropriately. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Daniel Price <daniel.price@gmail.com> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-10 04:27:08 +08:00
struct msi_chip {
struct module *owner;
struct device *dev;
of: pci: add registry of MSI chips This commit adds a very basic registry of msi_chip structures, so that an IRQ controller driver can register an msi_chip, and a PCIe host controller can find it, based on a 'struct device_node'. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-10 04:27:09 +08:00
struct device_node *of_node;
struct list_head list;
PCI: Introduce new MSI chip infrastructure The new struct msi_chip is used to associated an MSI controller with a PCI bus. It is automatically handed down from the root to its children during bus enumeration. This patch provides default (weak) implementations for the architecture- specific MSI functions (arch_setup_msi_irq(), arch_teardown_msi_irq() and arch_msi_check_device()) which check if a PCI device's bus has an attached MSI chip and forward the call appropriately. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Daniel Price <daniel.price@gmail.com> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-10 04:27:08 +08:00
int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev,
struct msi_desc *desc);
void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
int (*check_device)(struct msi_chip *chip, struct pci_dev *dev,
int nvec, int type);
};
[PATCH] msi: refactor and move the msi irq_chip into the arch code It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:59 +08:00
#endif /* LINUX_MSI_H */
Copy Permalink