renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
Code
7c6a4f3b16
linux-next/arch/powerpc/kernel/idle_e500.S

98 lines
2.2 KiB
ArmAsm
Raw Normal View History

powerpc/85xx: add DOZE/NAP support for e500 core The e500 core enter DOZE/NAP power-saving modes when the core go to cpu_idle routine. The power management default running mode is DOZE, If the user echo 1 > /proc/sys/kernel/powersave-nap the system will change to NAP running mode. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-19 05:26:52 +08:00
/*
* Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
* Dave Liu <daveliu@freescale.com>
* copy from idle_6xx.S and modify for e500 based processor,
* implement the power_save function in idle.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/threads.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
.text
_GLOBAL(e500_idle)
powerpc: Use CURRENT_THREAD_INFO instead of open coded assembly Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-05 12:41:35 +08:00
CURRENT_THREAD_INFO(r3, r1)
powerpc/85xx: add DOZE/NAP support for e500 core The e500 core enter DOZE/NAP power-saving modes when the core go to cpu_idle routine. The power management default running mode is DOZE, If the user echo 1 > /proc/sys/kernel/powersave-nap the system will change to NAP running mode. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-19 05:26:52 +08:00
lwz r4,TI_LOCAL_FLAGS(r3) /* set napping bit */
ori r4,r4,_TLF_NAPPING /* so when we take an exception */
stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */
powerpc: e500mc: Fix: use CONFIG_PPC_E500MC in idle_e500.S It is wrongly using undefined CONFIG_E500MC. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-11 13:56:08 +08:00
#ifdef CONFIG_PPC_E500MC
powerpc/e500mc: Add support for the wait instruction in e500_idle e500mc cannot doze or nap due to an erratum (as well as having a different mechanism than previous e500), but it has a "wait" instruction that is similar to doze. On 64-bit, due to the soft-irq-disable mechanism, the existing book3e_idle should be used instead. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-23 07:10:30 +08:00
wrteei 1
1: wait
/*
* Guard against spurious wakeups (e.g. from a hypervisor) --
* any real interrupt will cause us to return to LR due to
* _TLF_NAPPING.
*/
b 1b
#else
powerpc/85xx: add DOZE/NAP support for e500 core The e500 core enter DOZE/NAP power-saving modes when the core go to cpu_idle routine. The power management default running mode is DOZE, If the user echo 1 > /proc/sys/kernel/powersave-nap the system will change to NAP running mode. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-19 05:26:52 +08:00
/* Check if we can nap or doze, put HID0 mask in r3 */
lis r3,0
BEGIN_FTR_SECTION
lis r3,HID0_DOZE@h
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
BEGIN_FTR_SECTION
/* Now check if user enabled NAP mode */
lis r4,powersave_nap@ha
lwz r4,powersave_nap@l(r4)
cmpwi 0,r4,0
beq 1f
stwu r1,-16(r1)
mflr r0
stw r0,20(r1)
bl flush_dcache_L1
lwz r0,20(r1)
addi r1,r1,16
mtlr r0
lis r3,HID0_NAP@h
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
1:
/* Go to NAP or DOZE now */
mfspr r4,SPRN_HID0
rlwinm r4,r4,0,~(HID0_DOZE|HID0_NAP|HID0_SLEEP)
or r4,r4,r3
isync
mtspr SPRN_HID0,r4
isync
mfmsr r7
oris r7,r7,MSR_WE@h
ori r7,r7,MSR_EE
msync
mtmsr r7
isync
2: b 2b
powerpc/e500mc: Add support for the wait instruction in e500_idle e500mc cannot doze or nap due to an erratum (as well as having a different mechanism than previous e500), but it has a "wait" instruction that is similar to doze. On 64-bit, due to the soft-irq-disable mechanism, the existing book3e_idle should be used instead. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-23 07:10:30 +08:00
#endif /* !E500MC */
powerpc/85xx: add DOZE/NAP support for e500 core The e500 core enter DOZE/NAP power-saving modes when the core go to cpu_idle routine. The power management default running mode is DOZE, If the user echo 1 > /proc/sys/kernel/powersave-nap the system will change to NAP running mode. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-19 05:26:52 +08:00
/*
* Return from NAP/DOZE mode, restore some CPU specific registers,
* r2 containing physical address of current.
* r11 points to the exception frame (physical address).
* We have to preserve r10.
*/
_GLOBAL(power_save_ppc32_restore)
lwz r9,_LINK(r11) /* interrupted in e500_idle */
stw r9,_NIP(r11) /* make it do a blr */
#ifdef CONFIG_SMP
powerpc: Use CURRENT_THREAD_INFO instead of open coded assembly Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-05 12:41:35 +08:00
CURRENT_THREAD_INFO(r12, r1)
powerpc/85xx: add DOZE/NAP support for e500 core The e500 core enter DOZE/NAP power-saving modes when the core go to cpu_idle routine. The power management default running mode is DOZE, If the user echo 1 > /proc/sys/kernel/powersave-nap the system will change to NAP running mode. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-19 05:26:52 +08:00
lwz r11,TI_CPU(r12) /* get cpu number * 4 */
slwi r11,r11,2
#else
li r11,0
#endif
powerpc: Fix for getting CPU number in power_save_ppc32_restore() The calculation to get TI_CPU based off of SPRG3 was just plain wrong, meaning that we were getting garbage for the CPU number on 6xx/G3/G4 based SMP boxes in this code. Just offset off the stack pointer (to get to thread_info) like all the other references to TI_CPU do. This was pointed out by Chen Gong <G.Chen@freescale.com> [paulus@samba.org - use rlwinm r12,r11,... instead of rlwinm r12,r1,...; tophys()] Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 10:08:56 +08:00
powerpc/85xx: add DOZE/NAP support for e500 core The e500 core enter DOZE/NAP power-saving modes when the core go to cpu_idle routine. The power management default running mode is DOZE, If the user echo 1 > /proc/sys/kernel/powersave-nap the system will change to NAP running mode. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-19 05:26:52 +08:00
b transfer_to_handler_cont
Copy Permalink