2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/drivers/media/dvb-frontends/af9033.c

1194 lines
25 KiB
C
Raw Normal View History

/*
* Afatech AF9033 demodulator driver
*
* Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
* Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "af9033_priv.h"
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
struct af9033_state {
struct i2c_adapter *i2c;
struct dvb_frontend fe;
struct af9033_config cfg;
u32 bandwidth_hz;
bool ts_mode_parallel;
bool ts_mode_serial;
u32 ber;
u32 ucb;
unsigned long last_stat_check;
};
/* write multiple registers */
static int af9033_wr_regs(struct af9033_state *state, u32 reg, const u8 *val,
int len)
{
int ret;
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = state->cfg.i2c_addr,
.flags = 0,
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
.len = 3 + len,
.buf = buf,
}
};
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
if (3 + len > sizeof(buf)) {
dev_warn(&state->i2c->dev,
"%s: i2c wr reg=%04x: len=%d is too big!\n",
KBUILD_MODNAME, reg, len);
return -EINVAL;
}
buf[0] = (reg >> 16) & 0xff;
buf[1] = (reg >> 8) & 0xff;
buf[2] = (reg >> 0) & 0xff;
memcpy(&buf[3], val, len);
ret = i2c_transfer(state->i2c, msg, 1);
if (ret == 1) {
ret = 0;
} else {
dev_warn(&state->i2c->dev, "%s: i2c wr failed=%d reg=%06x " \
"len=%d\n", KBUILD_MODNAME, ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* read multiple registers */
static int af9033_rd_regs(struct af9033_state *state, u32 reg, u8 *val, int len)
{
int ret;
u8 buf[3] = { (reg >> 16) & 0xff, (reg >> 8) & 0xff,
(reg >> 0) & 0xff };
struct i2c_msg msg[2] = {
{
.addr = state->cfg.i2c_addr,
.flags = 0,
.len = sizeof(buf),
.buf = buf
}, {
.addr = state->cfg.i2c_addr,
.flags = I2C_M_RD,
.len = len,
.buf = val
}
};
ret = i2c_transfer(state->i2c, msg, 2);
if (ret == 2) {
ret = 0;
} else {
dev_warn(&state->i2c->dev, "%s: i2c rd failed=%d reg=%06x " \
"len=%d\n", KBUILD_MODNAME, ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* write single register */
static int af9033_wr_reg(struct af9033_state *state, u32 reg, u8 val)
{
return af9033_wr_regs(state, reg, &val, 1);
}
/* read single register */
static int af9033_rd_reg(struct af9033_state *state, u32 reg, u8 *val)
{
return af9033_rd_regs(state, reg, val, 1);
}
/* write single register with mask */
static int af9033_wr_reg_mask(struct af9033_state *state, u32 reg, u8 val,
u8 mask)
{
int ret;
u8 tmp;
/* no need for read if whole reg is written */
if (mask != 0xff) {
ret = af9033_rd_regs(state, reg, &tmp, 1);
if (ret)
return ret;
val &= mask;
tmp &= ~mask;
val |= tmp;
}
return af9033_wr_regs(state, reg, &val, 1);
}
/* read single register with mask */
static int af9033_rd_reg_mask(struct af9033_state *state, u32 reg, u8 *val,
u8 mask)
{
int ret, i;
u8 tmp;
ret = af9033_rd_regs(state, reg, &tmp, 1);
if (ret)
return ret;
tmp &= mask;
/* find position of the first bit */
for (i = 0; i < 8; i++) {
if ((mask >> i) & 0x01)
break;
}
*val = tmp >> i;
return 0;
}
/* write reg val table using reg addr auto increment */
static int af9033_wr_reg_val_tab(struct af9033_state *state,
const struct reg_val *tab, int tab_len)
{
#define MAX_TAB_LEN 212
int ret, i, j;
u8 buf[1 + MAX_TAB_LEN];
dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len);
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
if (tab_len > sizeof(buf)) {
dev_warn(&state->i2c->dev, "%s: tab len %d is too big\n",
KBUILD_MODNAME, tab_len);
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
return -EINVAL;
}
for (i = 0, j = 0; i < tab_len; i++) {
buf[j] = tab[i].val;
if (i == tab_len - 1 || tab[i].reg != tab[i + 1].reg - 1) {
ret = af9033_wr_regs(state, tab[i].reg - j, buf, j + 1);
if (ret < 0)
goto err;
j = 0;
} else {
j++;
}
}
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static u32 af9033_div(struct af9033_state *state, u32 a, u32 b, u32 x)
{
u32 r = 0, c = 0, i;
dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d\n", __func__, a, b, x);
if (a > b) {
c = a / b;
a = a - c * b;
}
for (i = 0; i < x; i++) {
if (a >= b) {
r += 1;
a -= b;
}
a <<= 1;
r <<= 1;
}
r = (c << (u32)x) + r;
dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d r=%d r=%x\n",
__func__, a, b, x, r, r);
return r;
}
static void af9033_release(struct dvb_frontend *fe)
{
struct af9033_state *state = fe->demodulator_priv;
kfree(state);
}
static int af9033_init(struct dvb_frontend *fe)
{
struct af9033_state *state = fe->demodulator_priv;
int ret, i, len;
const struct reg_val *init;
u8 buf[4];
u32 adc_cw, clock_cw;
struct reg_val_mask tab[] = {
{ 0x80fb24, 0x00, 0x08 },
{ 0x80004c, 0x00, 0xff },
{ 0x00f641, state->cfg.tuner, 0xff },
{ 0x80f5ca, 0x01, 0x01 },
{ 0x80f715, 0x01, 0x01 },
{ 0x00f41f, 0x04, 0x04 },
{ 0x00f41a, 0x01, 0x01 },
{ 0x80f731, 0x00, 0x01 },
{ 0x00d91e, 0x00, 0x01 },
{ 0x00d919, 0x00, 0x01 },
{ 0x80f732, 0x00, 0x01 },
{ 0x00d91f, 0x00, 0x01 },
{ 0x00d91a, 0x00, 0x01 },
{ 0x80f730, 0x00, 0x01 },
{ 0x80f778, 0x00, 0xff },
{ 0x80f73c, 0x01, 0x01 },
{ 0x80f776, 0x00, 0x01 },
{ 0x00d8fd, 0x01, 0xff },
{ 0x00d830, 0x01, 0xff },
{ 0x00d831, 0x00, 0xff },
{ 0x00d832, 0x00, 0xff },
{ 0x80f985, state->ts_mode_serial, 0x01 },
{ 0x80f986, state->ts_mode_parallel, 0x01 },
{ 0x00d827, 0x00, 0xff },
{ 0x00d829, 0x00, 0xff },
{ 0x800045, state->cfg.adc_multiplier, 0xff },
};
/* program clock control */
clock_cw = af9033_div(state, state->cfg.clock, 1000000ul, 19ul);
buf[0] = (clock_cw >> 0) & 0xff;
buf[1] = (clock_cw >> 8) & 0xff;
buf[2] = (clock_cw >> 16) & 0xff;
buf[3] = (clock_cw >> 24) & 0xff;
dev_dbg(&state->i2c->dev, "%s: clock=%d clock_cw=%08x\n",
__func__, state->cfg.clock, clock_cw);
ret = af9033_wr_regs(state, 0x800025, buf, 4);
if (ret < 0)
goto err;
/* program ADC control */
for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) {
if (clock_adc_lut[i].clock == state->cfg.clock)
break;
}
adc_cw = af9033_div(state, clock_adc_lut[i].adc, 1000000ul, 19ul);
buf[0] = (adc_cw >> 0) & 0xff;
buf[1] = (adc_cw >> 8) & 0xff;
buf[2] = (adc_cw >> 16) & 0xff;
dev_dbg(&state->i2c->dev, "%s: adc=%d adc_cw=%06x\n",
__func__, clock_adc_lut[i].adc, adc_cw);
ret = af9033_wr_regs(state, 0x80f1cd, buf, 3);
if (ret < 0)
goto err;
/* program register table */
for (i = 0; i < ARRAY_SIZE(tab); i++) {
ret = af9033_wr_reg_mask(state, tab[i].reg, tab[i].val,
tab[i].mask);
if (ret < 0)
goto err;
}
/* feed clock to RF tuner */
switch (state->cfg.tuner) {
case AF9033_TUNER_IT9135_38:
case AF9033_TUNER_IT9135_51:
case AF9033_TUNER_IT9135_52:
case AF9033_TUNER_IT9135_60:
case AF9033_TUNER_IT9135_61:
case AF9033_TUNER_IT9135_62:
ret = af9033_wr_reg(state, 0x80fba8, 0x00);
if (ret < 0)
goto err;
}
/* settings for TS interface */
if (state->cfg.ts_mode == AF9033_TS_MODE_USB) {
ret = af9033_wr_reg_mask(state, 0x80f9a5, 0x00, 0x01);
if (ret < 0)
goto err;
ret = af9033_wr_reg_mask(state, 0x80f9b5, 0x01, 0x01);
if (ret < 0)
goto err;
} else {
ret = af9033_wr_reg_mask(state, 0x80f990, 0x00, 0x01);
if (ret < 0)
goto err;
ret = af9033_wr_reg_mask(state, 0x80f9b5, 0x00, 0x01);
if (ret < 0)
goto err;
}
/* load OFSM settings */
dev_dbg(&state->i2c->dev, "%s: load ofsm settings\n", __func__);
switch (state->cfg.tuner) {
case AF9033_TUNER_IT9135_38:
case AF9033_TUNER_IT9135_51:
case AF9033_TUNER_IT9135_52:
len = ARRAY_SIZE(ofsm_init_it9135_v1);
init = ofsm_init_it9135_v1;
break;
case AF9033_TUNER_IT9135_60:
case AF9033_TUNER_IT9135_61:
case AF9033_TUNER_IT9135_62:
len = ARRAY_SIZE(ofsm_init_it9135_v2);
init = ofsm_init_it9135_v2;
break;
default:
len = ARRAY_SIZE(ofsm_init);
init = ofsm_init;
break;
}
ret = af9033_wr_reg_val_tab(state, init, len);
if (ret < 0)
goto err;
/* load tuner specific settings */
dev_dbg(&state->i2c->dev, "%s: load tuner specific settings\n",
__func__);
switch (state->cfg.tuner) {
case AF9033_TUNER_TUA9001:
len = ARRAY_SIZE(tuner_init_tua9001);
init = tuner_init_tua9001;
break;
case AF9033_TUNER_FC0011:
len = ARRAY_SIZE(tuner_init_fc0011);
init = tuner_init_fc0011;
break;
case AF9033_TUNER_MXL5007T:
len = ARRAY_SIZE(tuner_init_mxl5007t);
init = tuner_init_mxl5007t;
break;
case AF9033_TUNER_TDA18218:
len = ARRAY_SIZE(tuner_init_tda18218);
init = tuner_init_tda18218;
break;
case AF9033_TUNER_FC2580:
len = ARRAY_SIZE(tuner_init_fc2580);
init = tuner_init_fc2580;
break;
case AF9033_TUNER_FC0012:
len = ARRAY_SIZE(tuner_init_fc0012);
init = tuner_init_fc0012;
break;
case AF9033_TUNER_IT9135_38:
len = ARRAY_SIZE(tuner_init_it9135_38);
init = tuner_init_it9135_38;
break;
case AF9033_TUNER_IT9135_51:
len = ARRAY_SIZE(tuner_init_it9135_51);
init = tuner_init_it9135_51;
break;
case AF9033_TUNER_IT9135_52:
len = ARRAY_SIZE(tuner_init_it9135_52);
init = tuner_init_it9135_52;
break;
case AF9033_TUNER_IT9135_60:
len = ARRAY_SIZE(tuner_init_it9135_60);
init = tuner_init_it9135_60;
break;
case AF9033_TUNER_IT9135_61:
len = ARRAY_SIZE(tuner_init_it9135_61);
init = tuner_init_it9135_61;
break;
case AF9033_TUNER_IT9135_62:
len = ARRAY_SIZE(tuner_init_it9135_62);
init = tuner_init_it9135_62;
break;
default:
dev_dbg(&state->i2c->dev, "%s: unsupported tuner ID=%d\n",
__func__, state->cfg.tuner);
ret = -ENODEV;
goto err;
}
ret = af9033_wr_reg_val_tab(state, init, len);
if (ret < 0)
goto err;
if (state->cfg.ts_mode == AF9033_TS_MODE_SERIAL) {
ret = af9033_wr_reg_mask(state, 0x00d91c, 0x01, 0x01);
if (ret < 0)
goto err;
ret = af9033_wr_reg_mask(state, 0x00d917, 0x00, 0x01);
if (ret < 0)
goto err;
ret = af9033_wr_reg_mask(state, 0x00d916, 0x00, 0x01);
if (ret < 0)
goto err;
}
switch (state->cfg.tuner) {
case AF9033_TUNER_IT9135_60:
case AF9033_TUNER_IT9135_61:
case AF9033_TUNER_IT9135_62:
ret = af9033_wr_reg(state, 0x800000, 0x01);
if (ret < 0)
goto err;
}
state->bandwidth_hz = 0; /* force to program all parameters */
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int af9033_sleep(struct dvb_frontend *fe)
{
struct af9033_state *state = fe->demodulator_priv;
int ret, i;
u8 tmp;
ret = af9033_wr_reg(state, 0x80004c, 1);
if (ret < 0)
goto err;
ret = af9033_wr_reg(state, 0x800000, 0);
if (ret < 0)
goto err;
for (i = 100, tmp = 1; i && tmp; i--) {
ret = af9033_rd_reg(state, 0x80004c, &tmp);
if (ret < 0)
goto err;
usleep_range(200, 10000);
}
dev_dbg(&state->i2c->dev, "%s: loop=%d\n", __func__, i);
if (i == 0) {
ret = -ETIMEDOUT;
goto err;
}
ret = af9033_wr_reg_mask(state, 0x80fb24, 0x08, 0x08);
if (ret < 0)
goto err;
/* prevent current leak (?) */
if (state->cfg.ts_mode == AF9033_TS_MODE_SERIAL) {
/* enable parallel TS */
ret = af9033_wr_reg_mask(state, 0x00d917, 0x00, 0x01);
if (ret < 0)
goto err;
ret = af9033_wr_reg_mask(state, 0x00d916, 0x01, 0x01);
if (ret < 0)
goto err;
}
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int af9033_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *fesettings)
{
/* 800 => 2000 because IT9135 v2 is slow to gain lock */
fesettings->min_delay_ms = 2000;
fesettings->step_size = 0;
fesettings->max_drift = 0;
return 0;
}
static int af9033_set_frontend(struct dvb_frontend *fe)
{
struct af9033_state *state = fe->demodulator_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, i, spec_inv, sampling_freq;
u8 tmp, buf[3], bandwidth_reg_val;
u32 if_frequency, freq_cw, adc_freq;
dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n",
__func__, c->frequency, c->bandwidth_hz);
/* check bandwidth */
switch (c->bandwidth_hz) {
case 6000000:
bandwidth_reg_val = 0x00;
break;
case 7000000:
bandwidth_reg_val = 0x01;
break;
case 8000000:
bandwidth_reg_val = 0x02;
break;
default:
dev_dbg(&state->i2c->dev, "%s: invalid bandwidth_hz\n",
__func__);
ret = -EINVAL;
goto err;
}
/* program tuner */
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe);
/* program CFOE coefficients */
if (c->bandwidth_hz != state->bandwidth_hz) {
for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
if (coeff_lut[i].clock == state->cfg.clock &&
coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
break;
}
}
ret = af9033_wr_regs(state, 0x800001,
coeff_lut[i].val, sizeof(coeff_lut[i].val));
}
/* program frequency control */
if (c->bandwidth_hz != state->bandwidth_hz) {
spec_inv = state->cfg.spec_inv ? -1 : 1;
for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) {
if (clock_adc_lut[i].clock == state->cfg.clock)
break;
}
adc_freq = clock_adc_lut[i].adc;
/* get used IF frequency */
if (fe->ops.tuner_ops.get_if_frequency)
fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
else
if_frequency = 0;
sampling_freq = if_frequency;
while (sampling_freq > (adc_freq / 2))
sampling_freq -= adc_freq;
if (sampling_freq >= 0)
spec_inv *= -1;
else
sampling_freq *= -1;
freq_cw = af9033_div(state, sampling_freq, adc_freq, 23ul);
if (spec_inv == -1)
freq_cw = 0x800000 - freq_cw;
if (state->cfg.adc_multiplier == AF9033_ADC_MULTIPLIER_2X)
freq_cw /= 2;
buf[0] = (freq_cw >> 0) & 0xff;
buf[1] = (freq_cw >> 8) & 0xff;
buf[2] = (freq_cw >> 16) & 0x7f;
/* FIXME: there seems to be calculation error here... */
if (if_frequency == 0)
buf[2] = 0;
ret = af9033_wr_regs(state, 0x800029, buf, 3);
if (ret < 0)
goto err;
state->bandwidth_hz = c->bandwidth_hz;
}
ret = af9033_wr_reg_mask(state, 0x80f904, bandwidth_reg_val, 0x03);
if (ret < 0)
goto err;
ret = af9033_wr_reg(state, 0x800040, 0x00);
if (ret < 0)
goto err;
ret = af9033_wr_reg(state, 0x800047, 0x00);
if (ret < 0)
goto err;
ret = af9033_wr_reg_mask(state, 0x80f999, 0x00, 0x01);
if (ret < 0)
goto err;
if (c->frequency <= 230000000)
tmp = 0x00; /* VHF */
else
tmp = 0x01; /* UHF */
ret = af9033_wr_reg(state, 0x80004b, tmp);
if (ret < 0)
goto err;
ret = af9033_wr_reg(state, 0x800000, 0x00);
if (ret < 0)
goto err;
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int af9033_get_frontend(struct dvb_frontend *fe)
{
struct af9033_state *state = fe->demodulator_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret;
u8 buf[8];
dev_dbg(&state->i2c->dev, "%s:\n", __func__);
/* read all needed registers */
ret = af9033_rd_regs(state, 0x80f900, buf, sizeof(buf));
if (ret < 0)
goto err;
switch ((buf[0] >> 0) & 3) {
case 0:
c->transmission_mode = TRANSMISSION_MODE_2K;
break;
case 1:
c->transmission_mode = TRANSMISSION_MODE_8K;
break;
}
switch ((buf[1] >> 0) & 3) {
case 0:
c->guard_interval = GUARD_INTERVAL_1_32;
break;
case 1:
c->guard_interval = GUARD_INTERVAL_1_16;
break;
case 2:
c->guard_interval = GUARD_INTERVAL_1_8;
break;
case 3:
c->guard_interval = GUARD_INTERVAL_1_4;
break;
}
switch ((buf[2] >> 0) & 7) {
case 0:
c->hierarchy = HIERARCHY_NONE;
break;
case 1:
c->hierarchy = HIERARCHY_1;
break;
case 2:
c->hierarchy = HIERARCHY_2;
break;
case 3:
c->hierarchy = HIERARCHY_4;
break;
}
switch ((buf[3] >> 0) & 3) {
case 0:
c->modulation = QPSK;
break;
case 1:
c->modulation = QAM_16;
break;
case 2:
c->modulation = QAM_64;
break;
}
switch ((buf[4] >> 0) & 3) {
case 0:
c->bandwidth_hz = 6000000;
break;
case 1:
c->bandwidth_hz = 7000000;
break;
case 2:
c->bandwidth_hz = 8000000;
break;
}
switch ((buf[6] >> 0) & 7) {
case 0:
c->code_rate_HP = FEC_1_2;
break;
case 1:
c->code_rate_HP = FEC_2_3;
break;
case 2:
c->code_rate_HP = FEC_3_4;
break;
case 3:
c->code_rate_HP = FEC_5_6;
break;
case 4:
c->code_rate_HP = FEC_7_8;
break;
case 5:
c->code_rate_HP = FEC_NONE;
break;
}
switch ((buf[7] >> 0) & 7) {
case 0:
c->code_rate_LP = FEC_1_2;
break;
case 1:
c->code_rate_LP = FEC_2_3;
break;
case 2:
c->code_rate_LP = FEC_3_4;
break;
case 3:
c->code_rate_LP = FEC_5_6;
break;
case 4:
c->code_rate_LP = FEC_7_8;
break;
case 5:
c->code_rate_LP = FEC_NONE;
break;
}
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int af9033_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct af9033_state *state = fe->demodulator_priv;
int ret;
u8 tmp;
*status = 0;
/* radio channel status, 0=no result, 1=has signal, 2=no signal */
ret = af9033_rd_reg(state, 0x800047, &tmp);
if (ret < 0)
goto err;
/* has signal */
if (tmp == 0x01)
*status |= FE_HAS_SIGNAL;
if (tmp != 0x02) {
/* TPS lock */
ret = af9033_rd_reg_mask(state, 0x80f5a9, &tmp, 0x01);
if (ret < 0)
goto err;
if (tmp)
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
FE_HAS_VITERBI;
/* full lock */
ret = af9033_rd_reg_mask(state, 0x80f999, &tmp, 0x01);
if (ret < 0)
goto err;
if (tmp)
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
FE_HAS_VITERBI | FE_HAS_SYNC |
FE_HAS_LOCK;
}
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int af9033_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct af9033_state *state = fe->demodulator_priv;
int ret, i, len;
u8 buf[3], tmp;
u32 snr_val;
const struct val_snr *uninitialized_var(snr_lut);
/* read value */
ret = af9033_rd_regs(state, 0x80002c, buf, 3);
if (ret < 0)
goto err;
snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0];
/* read current modulation */
ret = af9033_rd_reg(state, 0x80f903, &tmp);
if (ret < 0)
goto err;
switch ((tmp >> 0) & 3) {
case 0:
len = ARRAY_SIZE(qpsk_snr_lut);
snr_lut = qpsk_snr_lut;
break;
case 1:
len = ARRAY_SIZE(qam16_snr_lut);
snr_lut = qam16_snr_lut;
break;
case 2:
len = ARRAY_SIZE(qam64_snr_lut);
snr_lut = qam64_snr_lut;
break;
default:
goto err;
}
for (i = 0; i < len; i++) {
tmp = snr_lut[i].snr;
if (snr_val < snr_lut[i].val)
break;
}
*snr = tmp * 10; /* dB/10 */
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int af9033_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
{
struct af9033_state *state = fe->demodulator_priv;
int ret;
u8 strength2;
/* read signal strength of 0-100 scale */
ret = af9033_rd_reg(state, 0x800048, &strength2);
if (ret < 0)
goto err;
/* scale value to 0x0000-0xffff */
*strength = strength2 * 0xffff / 100;
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int af9033_update_ch_stat(struct af9033_state *state)
{
int ret = 0;
u32 err_cnt, bit_cnt;
u16 abort_cnt;
u8 buf[7];
/* only update data every half second */
if (time_after(jiffies, state->last_stat_check + msecs_to_jiffies(500))) {
ret = af9033_rd_regs(state, 0x800032, buf, sizeof(buf));
if (ret < 0)
goto err;
/* in 8 byte packets? */
abort_cnt = (buf[1] << 8) + buf[0];
/* in bits */
err_cnt = (buf[4] << 16) + (buf[3] << 8) + buf[2];
/* in 8 byte packets? always(?) 0x2710 = 10000 */
bit_cnt = (buf[6] << 8) + buf[5];
if (bit_cnt < abort_cnt) {
abort_cnt = 1000;
state->ber = 0xffffffff;
} else {
/* 8 byte packets, that have not been rejected already */
bit_cnt -= (u32)abort_cnt;
if (bit_cnt == 0) {
state->ber = 0xffffffff;
} else {
err_cnt -= (u32)abort_cnt * 8 * 8;
bit_cnt *= 8 * 8;
state->ber = err_cnt * (0xffffffff / bit_cnt);
}
}
state->ucb += abort_cnt;
state->last_stat_check = jiffies;
}
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int af9033_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct af9033_state *state = fe->demodulator_priv;
int ret;
ret = af9033_update_ch_stat(state);
if (ret < 0)
return ret;
*ber = state->ber;
return 0;
}
static int af9033_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{
struct af9033_state *state = fe->demodulator_priv;
int ret;
ret = af9033_update_ch_stat(state);
if (ret < 0)
return ret;
*ucblocks = state->ucb;
return 0;
}
static int af9033_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct af9033_state *state = fe->demodulator_priv;
int ret;
dev_dbg(&state->i2c->dev, "%s: enable=%d\n", __func__, enable);
ret = af9033_wr_reg_mask(state, 0x00fa04, enable, 0x01);
if (ret < 0)
goto err;
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int af9033_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
{
struct af9033_state *state = fe->demodulator_priv;
int ret;
dev_dbg(&state->i2c->dev, "%s: onoff=%d\n", __func__, onoff);
ret = af9033_wr_reg_mask(state, 0x80f993, onoff, 0x01);
if (ret < 0)
goto err;
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int af9033_pid_filter(struct dvb_frontend *fe, int index, u16 pid, int onoff)
{
struct af9033_state *state = fe->demodulator_priv;
int ret;
u8 wbuf[2] = {(pid >> 0) & 0xff, (pid >> 8) & 0xff};
dev_dbg(&state->i2c->dev, "%s: index=%d pid=%04x onoff=%d\n",
__func__, index, pid, onoff);
if (pid > 0x1fff)
return 0;
ret = af9033_wr_regs(state, 0x80f996, wbuf, 2);
if (ret < 0)
goto err;
ret = af9033_wr_reg(state, 0x80f994, onoff);
if (ret < 0)
goto err;
ret = af9033_wr_reg(state, 0x80f995, index);
if (ret < 0)
goto err;
return 0;
err:
dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static struct dvb_frontend_ops af9033_ops;
struct dvb_frontend *af9033_attach(const struct af9033_config *config,
struct i2c_adapter *i2c,
struct af9033_ops *ops)
{
int ret;
struct af9033_state *state;
u8 buf[8];
dev_dbg(&i2c->dev, "%s:\n", __func__);
/* allocate memory for the internal state */
state = kzalloc(sizeof(struct af9033_state), GFP_KERNEL);
if (state == NULL)
goto err;
/* setup the state */
state->i2c = i2c;
memcpy(&state->cfg, config, sizeof(struct af9033_config));
if (state->cfg.clock != 12000000) {
dev_err(&state->i2c->dev, "%s: af9033: unsupported clock=%d, " \
"only 12000000 Hz is supported currently\n",
KBUILD_MODNAME, state->cfg.clock);
goto err;
}
/* firmware version */
ret = af9033_rd_regs(state, 0x0083e9, &buf[0], 4);
if (ret < 0)
goto err;
ret = af9033_rd_regs(state, 0x804191, &buf[4], 4);
if (ret < 0)
goto err;
dev_info(&state->i2c->dev, "%s: firmware version: LINK=%d.%d.%d.%d " \
"OFDM=%d.%d.%d.%d\n", KBUILD_MODNAME, buf[0], buf[1],
buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
/* sleep */
switch (state->cfg.tuner) {
case AF9033_TUNER_IT9135_38:
case AF9033_TUNER_IT9135_51:
case AF9033_TUNER_IT9135_52:
case AF9033_TUNER_IT9135_60:
case AF9033_TUNER_IT9135_61:
case AF9033_TUNER_IT9135_62:
/* IT9135 did not like to sleep at that early */
break;
default:
ret = af9033_wr_reg(state, 0x80004c, 1);
if (ret < 0)
goto err;
ret = af9033_wr_reg(state, 0x800000, 0);
if (ret < 0)
goto err;
}
/* configure internal TS mode */
switch (state->cfg.ts_mode) {
case AF9033_TS_MODE_PARALLEL:
state->ts_mode_parallel = true;
break;
case AF9033_TS_MODE_SERIAL:
state->ts_mode_serial = true;
break;
case AF9033_TS_MODE_USB:
/* usb mode for AF9035 */
default:
break;
}
/* create dvb_frontend */
memcpy(&state->fe.ops, &af9033_ops, sizeof(struct dvb_frontend_ops));
state->fe.demodulator_priv = state;
if (ops) {
ops->pid_filter = af9033_pid_filter;
ops->pid_filter_ctrl = af9033_pid_filter_ctrl;
}
return &state->fe;
err:
kfree(state);
return NULL;
}
EXPORT_SYMBOL(af9033_attach);
static struct dvb_frontend_ops af9033_ops = {
.delsys = { SYS_DVBT },
.info = {
.name = "Afatech AF9033 (DVB-T)",
.frequency_min = 174000000,
.frequency_max = 862000000,
.frequency_stepsize = 250000,
.frequency_tolerance = 0,
.caps = FE_CAN_FEC_1_2 |
FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 |
FE_CAN_FEC_7_8 |
FE_CAN_FEC_AUTO |
FE_CAN_QPSK |
FE_CAN_QAM_16 |
FE_CAN_QAM_64 |
FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO |
FE_CAN_HIERARCHY_AUTO |
FE_CAN_RECOVER |
FE_CAN_MUTE_TS
},
.release = af9033_release,
.init = af9033_init,
.sleep = af9033_sleep,
.get_tune_settings = af9033_get_tune_settings,
.set_frontend = af9033_set_frontend,
.get_frontend = af9033_get_frontend,
.read_status = af9033_read_status,
.read_snr = af9033_read_snr,
.read_signal_strength = af9033_read_signal_strength,
.read_ber = af9033_read_ber,
.read_ucblocks = af9033_read_ucblocks,
.i2c_gate_ctrl = af9033_i2c_gate_ctrl,
};
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("Afatech AF9033 DVB-T demodulator driver");
MODULE_LICENSE("GPL");