renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-30 08:04:13 +08:00
Code
7aecd5ca80
linux-next/arch/mips/dec/setup.c

777 lines
23 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
There is NO port I/O space on the DECstation. Minor clean-ups. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-06-17 04:23:20 +08:00
* System-specific setup, especially interrupts.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1998 Harald Koerfgen
There is NO port I/O space on the DECstation. Minor clean-ups. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-06-17 04:23:20 +08:00
* Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
#include <linux/console.h>
#include <linux/init.h>
There is NO port I/O space on the DECstation. Minor clean-ups. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-06-17 04:23:20 +08:00
#include <linux/interrupt.h>
#include <linux/ioport.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/module.h>
There is NO port I/O space on the DECstation. Minor clean-ups. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-06-17 04:23:20 +08:00
#include <linux/param.h>
#include <linux/sched.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/spinlock.h>
#include <linux/types.h>
[MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-01-19 01:37:07 +08:00
#include <linux/pm.h>
MIPS: Add missing #inclusions of <linux/irq.h> Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should really include it. Note that this can replace #inclusions of <asm/irq.h>. This is required for the patch to sort out irqflags handling function naming to compile on MIPS. The problem is that these files require access to things like setup_irq() - which isn't available by #including <linux/interrupt.h> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-07 21:08:54 +08:00
#include <linux/irq.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
MIPS: DEC: Remove the Halt button interrupt on R4k systems On R4k DECstations the Halt button is wired to the NMI processor input rather than an ordinary interrupt input such as on R3k DECstations. This is possible with a different design of the CPU daughtercard that routes the Halt button line from the baseboard connector. Additionally the interrupt input has been reused for a different purpose on the KN04 and KN05 R4k CPU daughtercards so it is better kept masked. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-04-07 05:06:28 +08:00
#include <asm/cpu-type.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <asm/traps.h>
#include <asm/wbflush.h>
#include <asm/dec/interrupts.h>
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
#include <asm/dec/ioasic_ints.h>
#include <asm/dec/kn01.h>
#include <asm/dec/kn02.h>
#include <asm/dec/kn02ba.h>
#include <asm/dec/kn02ca.h>
#include <asm/dec/kn03.h>
#include <asm/dec/kn230.h>
Use physical addresses at the interface level, letting drivers remap them as appropriate. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-02 00:10:40 +08:00
#include <asm/dec/system.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void dec_machine_restart(char *command);
extern void dec_machine_halt(void);
extern void dec_machine_power_off(void);
[MIPS] DEC: pt_regs fixes for dec_intr_halt. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:38:18 +08:00
extern irqreturn_t dec_intr_halt(int irq, void *dev_id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
Use physical addresses at the interface level, letting drivers remap them as appropriate. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-02 00:10:40 +08:00
unsigned long dec_kn_slot_base, dec_kn_slot_size;
EXPORT_SYMBOL(dec_kn_slot_base);
EXPORT_SYMBOL(dec_kn_slot_size);
[TC] TURBOchannel support for the DECstation This is the platform-specific part of TURBOchannel bus support for the DECstation. It implements determining whether the bus is actually there, getting bus parameters, IRQ assignments for devices and protected accesses to possibly unoccupied slots that may trigger bus error exceptions. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06 08:28:26 +08:00
int dec_tc_bus;
[MIPS] DEC: Initialise ioasic_ssr_lock Fix the definition of the ioasic_ssr_lock spinlock to include a proper initialisation. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-17 23:58:18 +08:00
DEFINE_SPINLOCK(ioasic_ssr_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
volatile u32 *ioasic_base;
Use physical addresses at the interface level, letting drivers remap them as appropriate. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-02 00:10:40 +08:00
EXPORT_SYMBOL(ioasic_base);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* IRQ routing and priority tables. Priorites are set as follows:
*
DEC: Whitespace cleanup Commit 7034228792cc561e79ff8600f02884bd4c80e287 [MIPS: Whitespace cleanup.] did a lot of good and a little damage. Revert the damage. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-23 04:58:50 +08:00
* KN01 KN230 KN02 KN02-BA KN02-CA KN03
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* MEMORY CPU CPU CPU ASIC CPU CPU
* RTC CPU CPU CPU ASIC CPU CPU
* DMA - - - ASIC ASIC ASIC
* SERIAL0 CPU CPU CSR ASIC ASIC ASIC
* SERIAL1 - - - ASIC - ASIC
* SCSI CPU CPU CSR ASIC ASIC ASIC
* ETHERNET CPU * CSR ASIC ASIC ASIC
* other - - - ASIC - -
* TC2 - - CSR CPU ASIC ASIC
* TC1 - - CSR CPU ASIC ASIC
* TC0 - - CSR CPU ASIC ASIC
* other - CPU - CPU ASIC ASIC
* other - - - - CPU CPU
*
* * -- shared with SCSI
*/
int dec_interrupt[DEC_NR_INTS] = {
[0 ... DEC_NR_INTS - 1] = -1
};
Use physical addresses at the interface level, letting drivers remap them as appropriate. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-02 00:10:40 +08:00
EXPORT_SYMBOL(dec_interrupt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2] = {
{ { .i = ~0 }, { .p = dec_intr_unimplemented } },
};
int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2] = {
{ { .i = ~0 }, { .p = asic_intr_unimplemented } },
};
int cpu_fpu_mask = DEC_CPU_IRQ_MASK(DEC_CPU_INR_FPU);
static struct irqaction ioirq = {
.handler = no_action,
.name = "cascade",
MIPS: Mark cascade and low level interrupts IRQF_NO_THREAD Mark interrupts with no_action handler, cascade interrupts, low level interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them from forced threading. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-23 20:41:24 +08:00
.flags = IRQF_NO_THREAD,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
static struct irqaction fpuirq = {
.handler = no_action,
.name = "fpu",
MIPS: Mark cascade and low level interrupts IRQF_NO_THREAD Mark interrupts with no_action handler, cascade interrupts, low level interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them from forced threading. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-23 20:41:24 +08:00
.flags = IRQF_NO_THREAD,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
static struct irqaction busirq = {
.name = "bus error",
MIPS: Mark cascade and low level interrupts IRQF_NO_THREAD Mark interrupts with no_action handler, cascade interrupts, low level interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them from forced threading. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-23 20:41:24 +08:00
.flags = IRQF_NO_THREAD,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
static struct irqaction haltirq = {
.handler = dec_intr_halt,
.name = "halt",
MIPS: Mark cascade and low level interrupts IRQF_NO_THREAD Mark interrupts with no_action handler, cascade interrupts, low level interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them from forced threading. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-23 20:41:24 +08:00
.flags = IRQF_NO_THREAD,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
/*
* Bus error (DBE/IBE exceptions and bus interrupts) handling setup.
*/
Make static what ought to be static. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-08-26 21:36:42 +08:00
static void __init dec_be_init(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
switch (mips_machtype) {
case MACH_DS23100: /* DS2100/DS3100 Pmin/Pmax */
System-specific handling of bus errors for DECstation variations supporting parity errors only for memory (Pmax/3min/Maxine). Fixes for resources decoded by the KN04/KN05 MB ASIC. Additional clean-ups for the ECC handler. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-06-23 04:56:26 +08:00
board_be_handler = dec_kn01_be_handler;
busirq.handler = dec_kn01_be_interrupt;
[PATCH] irq-flags: MIPS: Use the new IRQF_ constants Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 10:29:20 +08:00
busirq.flags |= IRQF_SHARED;
System-specific handling of bus errors for DECstation variations supporting parity errors only for memory (Pmax/3min/Maxine). Fixes for resources decoded by the KN04/KN05 MB ASIC. Additional clean-ups for the ECC handler. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-06-23 04:56:26 +08:00
dec_kn01_be_init();
break;
case MACH_DS5000_1XX: /* DS5000/1xx 3min */
case MACH_DS5000_XX: /* DS5000/xx Maxine */
board_be_handler = dec_kn02xa_be_handler;
busirq.handler = dec_kn02xa_be_interrupt;
dec_kn02xa_be_init();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case MACH_DS5000_200: /* DS5000/200 3max */
case MACH_DS5000_2X0: /* DS5000/240 3max+ */
case MACH_DS5900: /* DS5900 bigmax */
board_be_handler = dec_ecc_be_handler;
busirq.handler = dec_ecc_be_interrupt;
dec_ecc_be_init();
break;
}
}
[MIPS] Cleanup memory managment initialization. Historically plat_mem_setup did the entire platform initialization. This was rather impractical because it meant plat_mem_setup had to get away without any kind of memory allocator. To keep old code from breaking plat_setup was just renamed to plat_setup and a second platform initialization hook for anything else was introduced. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-18 08:32:22 +08:00
void __init plat_mem_setup(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
board_be_init = dec_be_init;
wbflush_setup();
_machine_restart = dec_machine_restart;
_machine_halt = dec_machine_halt;
[MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-01-19 01:37:07 +08:00
pm_power_off = dec_machine_power_off;
There is NO port I/O space on the DECstation. Minor clean-ups. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-06-17 04:23:20 +08:00
ioport_resource.start = ~0UL;
ioport_resource.end = 0UL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Machine-specific initialisation for KN01, aka DS2100 (aka Pmin)
* or DS3100 (aka Pmax).
*/
static int kn01_interrupt[DEC_NR_INTS] __initdata = {
[DEC_IRQ_CASCADE] = -1,
[DEC_IRQ_AB_RECV] = -1,
[DEC_IRQ_AB_XMIT] = -1,
[DEC_IRQ_DZ11] = DEC_CPU_IRQ_NR(KN01_CPU_INR_DZ11),
[DEC_IRQ_ASC] = -1,
[DEC_IRQ_FLOPPY] = -1,
[DEC_IRQ_FPU] = DEC_CPU_IRQ_NR(DEC_CPU_INR_FPU),
[DEC_IRQ_HALT] = -1,
[DEC_IRQ_ISDN] = -1,
[DEC_IRQ_LANCE] = DEC_CPU_IRQ_NR(KN01_CPU_INR_LANCE),
[DEC_IRQ_BUS] = DEC_CPU_IRQ_NR(KN01_CPU_INR_BUS),
[DEC_IRQ_PSU] = -1,
[DEC_IRQ_RTC] = DEC_CPU_IRQ_NR(KN01_CPU_INR_RTC),
[DEC_IRQ_SCC0] = -1,
[DEC_IRQ_SCC1] = -1,
[DEC_IRQ_SII] = DEC_CPU_IRQ_NR(KN01_CPU_INR_SII),
[DEC_IRQ_TC0] = -1,
[DEC_IRQ_TC1] = -1,
[DEC_IRQ_TC2] = -1,
[DEC_IRQ_TIMER] = -1,
[DEC_IRQ_VIDEO] = DEC_CPU_IRQ_NR(KN01_CPU_INR_VIDEO),
[DEC_IRQ_ASC_MERR] = -1,
[DEC_IRQ_ASC_ERR] = -1,
[DEC_IRQ_ASC_DMA] = -1,
[DEC_IRQ_FLOPPY_ERR] = -1,
[DEC_IRQ_ISDN_ERR] = -1,
[DEC_IRQ_ISDN_RXDMA] = -1,
[DEC_IRQ_ISDN_TXDMA] = -1,
[DEC_IRQ_LANCE_MERR] = -1,
[DEC_IRQ_SCC0A_RXERR] = -1,
[DEC_IRQ_SCC0A_RXDMA] = -1,
[DEC_IRQ_SCC0A_TXERR] = -1,
[DEC_IRQ_SCC0A_TXDMA] = -1,
[DEC_IRQ_AB_RXERR] = -1,
[DEC_IRQ_AB_RXDMA] = -1,
[DEC_IRQ_AB_TXERR] = -1,
[DEC_IRQ_AB_TXDMA] = -1,
[DEC_IRQ_SCC1A_RXERR] = -1,
[DEC_IRQ_SCC1A_RXDMA] = -1,
[DEC_IRQ_SCC1A_TXERR] = -1,
[DEC_IRQ_SCC1A_TXDMA] = -1,
};
static int_ptr kn01_cpu_mask_nr_tbl[][2] __initdata = {
{ { .i = DEC_CPU_IRQ_MASK(KN01_CPU_INR_BUS) },
{ .i = DEC_CPU_IRQ_NR(KN01_CPU_INR_BUS) } },
{ { .i = DEC_CPU_IRQ_MASK(KN01_CPU_INR_RTC) },
{ .i = DEC_CPU_IRQ_NR(KN01_CPU_INR_RTC) } },
{ { .i = DEC_CPU_IRQ_MASK(KN01_CPU_INR_DZ11) },
{ .i = DEC_CPU_IRQ_NR(KN01_CPU_INR_DZ11) } },
{ { .i = DEC_CPU_IRQ_MASK(KN01_CPU_INR_SII) },
{ .i = DEC_CPU_IRQ_NR(KN01_CPU_INR_SII) } },
{ { .i = DEC_CPU_IRQ_MASK(KN01_CPU_INR_LANCE) },
{ .i = DEC_CPU_IRQ_NR(KN01_CPU_INR_LANCE) } },
{ { .i = DEC_CPU_IRQ_ALL },
{ .p = cpu_all_int } },
};
Make static what ought to be static. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-08-26 21:36:42 +08:00
static void __init dec_init_kn01(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn01_interrupt,
sizeof(kn01_interrupt));
/* CPU IRQ priorities. */
memcpy(&cpu_mask_nr_tbl, &kn01_cpu_mask_nr_tbl,
sizeof(kn01_cpu_mask_nr_tbl));
[MIPS] Define MIPS_CPU_IRQ_BASE in generic header The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-01-08 01:14:29 +08:00
mips_cpu_irq_init();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* dec_init_kn01 */
/*
* Machine-specific initialisation for KN230, aka DS5100, aka MIPSmate.
*/
static int kn230_interrupt[DEC_NR_INTS] __initdata = {
[DEC_IRQ_CASCADE] = -1,
[DEC_IRQ_AB_RECV] = -1,
[DEC_IRQ_AB_XMIT] = -1,
[DEC_IRQ_DZ11] = DEC_CPU_IRQ_NR(KN230_CPU_INR_DZ11),
[DEC_IRQ_ASC] = -1,
[DEC_IRQ_FLOPPY] = -1,
[DEC_IRQ_FPU] = DEC_CPU_IRQ_NR(DEC_CPU_INR_FPU),
[DEC_IRQ_HALT] = DEC_CPU_IRQ_NR(KN230_CPU_INR_HALT),
[DEC_IRQ_ISDN] = -1,
[DEC_IRQ_LANCE] = DEC_CPU_IRQ_NR(KN230_CPU_INR_LANCE),
[DEC_IRQ_BUS] = DEC_CPU_IRQ_NR(KN230_CPU_INR_BUS),
[DEC_IRQ_PSU] = -1,
[DEC_IRQ_RTC] = DEC_CPU_IRQ_NR(KN230_CPU_INR_RTC),
[DEC_IRQ_SCC0] = -1,
[DEC_IRQ_SCC1] = -1,
[DEC_IRQ_SII] = DEC_CPU_IRQ_NR(KN230_CPU_INR_SII),
[DEC_IRQ_TC0] = -1,
[DEC_IRQ_TC1] = -1,
[DEC_IRQ_TC2] = -1,
[DEC_IRQ_TIMER] = -1,
[DEC_IRQ_VIDEO] = -1,
[DEC_IRQ_ASC_MERR] = -1,
[DEC_IRQ_ASC_ERR] = -1,
[DEC_IRQ_ASC_DMA] = -1,
[DEC_IRQ_FLOPPY_ERR] = -1,
[DEC_IRQ_ISDN_ERR] = -1,
[DEC_IRQ_ISDN_RXDMA] = -1,
[DEC_IRQ_ISDN_TXDMA] = -1,
[DEC_IRQ_LANCE_MERR] = -1,
[DEC_IRQ_SCC0A_RXERR] = -1,
[DEC_IRQ_SCC0A_RXDMA] = -1,
[DEC_IRQ_SCC0A_TXERR] = -1,
[DEC_IRQ_SCC0A_TXDMA] = -1,
[DEC_IRQ_AB_RXERR] = -1,
[DEC_IRQ_AB_RXDMA] = -1,
[DEC_IRQ_AB_TXERR] = -1,
[DEC_IRQ_AB_TXDMA] = -1,
[DEC_IRQ_SCC1A_RXERR] = -1,
[DEC_IRQ_SCC1A_RXDMA] = -1,
[DEC_IRQ_SCC1A_TXERR] = -1,
[DEC_IRQ_SCC1A_TXDMA] = -1,
};
static int_ptr kn230_cpu_mask_nr_tbl[][2] __initdata = {
{ { .i = DEC_CPU_IRQ_MASK(KN230_CPU_INR_BUS) },
{ .i = DEC_CPU_IRQ_NR(KN230_CPU_INR_BUS) } },
{ { .i = DEC_CPU_IRQ_MASK(KN230_CPU_INR_RTC) },
{ .i = DEC_CPU_IRQ_NR(KN230_CPU_INR_RTC) } },
{ { .i = DEC_CPU_IRQ_MASK(KN230_CPU_INR_DZ11) },
{ .i = DEC_CPU_IRQ_NR(KN230_CPU_INR_DZ11) } },
{ { .i = DEC_CPU_IRQ_MASK(KN230_CPU_INR_SII) },
{ .i = DEC_CPU_IRQ_NR(KN230_CPU_INR_SII) } },
{ { .i = DEC_CPU_IRQ_ALL },
{ .p = cpu_all_int } },
};
Make static what ought to be static. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-08-26 21:36:42 +08:00
static void __init dec_init_kn230(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn230_interrupt,
sizeof(kn230_interrupt));
/* CPU IRQ priorities. */
memcpy(&cpu_mask_nr_tbl, &kn230_cpu_mask_nr_tbl,
sizeof(kn230_cpu_mask_nr_tbl));
[MIPS] Define MIPS_CPU_IRQ_BASE in generic header The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-01-08 01:14:29 +08:00
mips_cpu_irq_init();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* dec_init_kn230 */
/*
* Machine-specific initialisation for KN02, aka DS5000/200, aka 3max.
*/
static int kn02_interrupt[DEC_NR_INTS] __initdata = {
[DEC_IRQ_CASCADE] = DEC_CPU_IRQ_NR(KN02_CPU_INR_CASCADE),
[DEC_IRQ_AB_RECV] = -1,
[DEC_IRQ_AB_XMIT] = -1,
[DEC_IRQ_DZ11] = KN02_IRQ_NR(KN02_CSR_INR_DZ11),
[DEC_IRQ_ASC] = KN02_IRQ_NR(KN02_CSR_INR_ASC),
[DEC_IRQ_FLOPPY] = -1,
[DEC_IRQ_FPU] = DEC_CPU_IRQ_NR(DEC_CPU_INR_FPU),
[DEC_IRQ_HALT] = -1,
[DEC_IRQ_ISDN] = -1,
[DEC_IRQ_LANCE] = KN02_IRQ_NR(KN02_CSR_INR_LANCE),
[DEC_IRQ_BUS] = DEC_CPU_IRQ_NR(KN02_CPU_INR_BUS),
[DEC_IRQ_PSU] = -1,
[DEC_IRQ_RTC] = DEC_CPU_IRQ_NR(KN02_CPU_INR_RTC),
[DEC_IRQ_SCC0] = -1,
[DEC_IRQ_SCC1] = -1,
[DEC_IRQ_SII] = -1,
[DEC_IRQ_TC0] = KN02_IRQ_NR(KN02_CSR_INR_TC0),
[DEC_IRQ_TC1] = KN02_IRQ_NR(KN02_CSR_INR_TC1),
[DEC_IRQ_TC2] = KN02_IRQ_NR(KN02_CSR_INR_TC2),
[DEC_IRQ_TIMER] = -1,
[DEC_IRQ_VIDEO] = -1,
[DEC_IRQ_ASC_MERR] = -1,
[DEC_IRQ_ASC_ERR] = -1,
[DEC_IRQ_ASC_DMA] = -1,
[DEC_IRQ_FLOPPY_ERR] = -1,
[DEC_IRQ_ISDN_ERR] = -1,
[DEC_IRQ_ISDN_RXDMA] = -1,
[DEC_IRQ_ISDN_TXDMA] = -1,
[DEC_IRQ_LANCE_MERR] = -1,
[DEC_IRQ_SCC0A_RXERR] = -1,
[DEC_IRQ_SCC0A_RXDMA] = -1,
[DEC_IRQ_SCC0A_TXERR] = -1,
[DEC_IRQ_SCC0A_TXDMA] = -1,
[DEC_IRQ_AB_RXERR] = -1,
[DEC_IRQ_AB_RXDMA] = -1,
[DEC_IRQ_AB_TXERR] = -1,
[DEC_IRQ_AB_TXDMA] = -1,
[DEC_IRQ_SCC1A_RXERR] = -1,
[DEC_IRQ_SCC1A_RXDMA] = -1,
[DEC_IRQ_SCC1A_TXERR] = -1,
[DEC_IRQ_SCC1A_TXDMA] = -1,
};
static int_ptr kn02_cpu_mask_nr_tbl[][2] __initdata = {
{ { .i = DEC_CPU_IRQ_MASK(KN02_CPU_INR_BUS) },
{ .i = DEC_CPU_IRQ_NR(KN02_CPU_INR_BUS) } },
{ { .i = DEC_CPU_IRQ_MASK(KN02_CPU_INR_RTC) },
{ .i = DEC_CPU_IRQ_NR(KN02_CPU_INR_RTC) } },
{ { .i = DEC_CPU_IRQ_MASK(KN02_CPU_INR_CASCADE) },
{ .p = kn02_io_int } },
{ { .i = DEC_CPU_IRQ_ALL },
{ .p = cpu_all_int } },
};
static int_ptr kn02_asic_mask_nr_tbl[][2] __initdata = {
{ { .i = KN02_IRQ_MASK(KN02_CSR_INR_DZ11) },
{ .i = KN02_IRQ_NR(KN02_CSR_INR_DZ11) } },
{ { .i = KN02_IRQ_MASK(KN02_CSR_INR_ASC) },
{ .i = KN02_IRQ_NR(KN02_CSR_INR_ASC) } },
{ { .i = KN02_IRQ_MASK(KN02_CSR_INR_LANCE) },
{ .i = KN02_IRQ_NR(KN02_CSR_INR_LANCE) } },
{ { .i = KN02_IRQ_MASK(KN02_CSR_INR_TC2) },
{ .i = KN02_IRQ_NR(KN02_CSR_INR_TC2) } },
{ { .i = KN02_IRQ_MASK(KN02_CSR_INR_TC1) },
{ .i = KN02_IRQ_NR(KN02_CSR_INR_TC1) } },
{ { .i = KN02_IRQ_MASK(KN02_CSR_INR_TC0) },
{ .i = KN02_IRQ_NR(KN02_CSR_INR_TC0) } },
{ { .i = KN02_IRQ_ALL },
{ .p = kn02_all_int } },
};
Make static what ought to be static. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-08-26 21:36:42 +08:00
static void __init dec_init_kn02(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn02_interrupt,
sizeof(kn02_interrupt));
/* CPU IRQ priorities. */
memcpy(&cpu_mask_nr_tbl, &kn02_cpu_mask_nr_tbl,
sizeof(kn02_cpu_mask_nr_tbl));
/* KN02 CSR IRQ priorities. */
memcpy(&asic_mask_nr_tbl, &kn02_asic_mask_nr_tbl,
sizeof(kn02_asic_mask_nr_tbl));
[MIPS] Define MIPS_CPU_IRQ_BASE in generic header The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-01-08 01:14:29 +08:00
mips_cpu_irq_init();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
init_kn02_irqs(KN02_IRQ_BASE);
} /* dec_init_kn02 */
/*
* Machine-specific initialisation for KN02-BA, aka DS5000/1xx
DEC: Whitespace cleanup Commit 7034228792cc561e79ff8600f02884bd4c80e287 [MIPS: Whitespace cleanup.] did a lot of good and a little damage. Revert the damage. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-23 04:58:50 +08:00
* (xx = 20, 25, 33), aka 3min. Also applies to KN04(-BA), aka
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* DS5000/150, aka 4min.
*/
static int kn02ba_interrupt[DEC_NR_INTS] __initdata = {
[DEC_IRQ_CASCADE] = DEC_CPU_IRQ_NR(KN02BA_CPU_INR_CASCADE),
[DEC_IRQ_AB_RECV] = -1,
[DEC_IRQ_AB_XMIT] = -1,
[DEC_IRQ_DZ11] = -1,
[DEC_IRQ_ASC] = IO_IRQ_NR(KN02BA_IO_INR_ASC),
[DEC_IRQ_FLOPPY] = -1,
[DEC_IRQ_FPU] = DEC_CPU_IRQ_NR(DEC_CPU_INR_FPU),
[DEC_IRQ_HALT] = DEC_CPU_IRQ_NR(KN02BA_CPU_INR_HALT),
[DEC_IRQ_ISDN] = -1,
[DEC_IRQ_LANCE] = IO_IRQ_NR(KN02BA_IO_INR_LANCE),
[DEC_IRQ_BUS] = IO_IRQ_NR(KN02BA_IO_INR_BUS),
[DEC_IRQ_PSU] = IO_IRQ_NR(KN02BA_IO_INR_PSU),
[DEC_IRQ_RTC] = IO_IRQ_NR(KN02BA_IO_INR_RTC),
[DEC_IRQ_SCC0] = IO_IRQ_NR(KN02BA_IO_INR_SCC0),
[DEC_IRQ_SCC1] = IO_IRQ_NR(KN02BA_IO_INR_SCC1),
[DEC_IRQ_SII] = -1,
[DEC_IRQ_TC0] = DEC_CPU_IRQ_NR(KN02BA_CPU_INR_TC0),
[DEC_IRQ_TC1] = DEC_CPU_IRQ_NR(KN02BA_CPU_INR_TC1),
[DEC_IRQ_TC2] = DEC_CPU_IRQ_NR(KN02BA_CPU_INR_TC2),
[DEC_IRQ_TIMER] = -1,
[DEC_IRQ_VIDEO] = -1,
[DEC_IRQ_ASC_MERR] = IO_IRQ_NR(IO_INR_ASC_MERR),
[DEC_IRQ_ASC_ERR] = IO_IRQ_NR(IO_INR_ASC_ERR),
[DEC_IRQ_ASC_DMA] = IO_IRQ_NR(IO_INR_ASC_DMA),
[DEC_IRQ_FLOPPY_ERR] = -1,
[DEC_IRQ_ISDN_ERR] = -1,
[DEC_IRQ_ISDN_RXDMA] = -1,
[DEC_IRQ_ISDN_TXDMA] = -1,
[DEC_IRQ_LANCE_MERR] = IO_IRQ_NR(IO_INR_LANCE_MERR),
[DEC_IRQ_SCC0A_RXERR] = IO_IRQ_NR(IO_INR_SCC0A_RXERR),
[DEC_IRQ_SCC0A_RXDMA] = IO_IRQ_NR(IO_INR_SCC0A_RXDMA),
[DEC_IRQ_SCC0A_TXERR] = IO_IRQ_NR(IO_INR_SCC0A_TXERR),
[DEC_IRQ_SCC0A_TXDMA] = IO_IRQ_NR(IO_INR_SCC0A_TXDMA),
[DEC_IRQ_AB_RXERR] = -1,
[DEC_IRQ_AB_RXDMA] = -1,
[DEC_IRQ_AB_TXERR] = -1,
[DEC_IRQ_AB_TXDMA] = -1,
[DEC_IRQ_SCC1A_RXERR] = IO_IRQ_NR(IO_INR_SCC1A_RXERR),
[DEC_IRQ_SCC1A_RXDMA] = IO_IRQ_NR(IO_INR_SCC1A_RXDMA),
[DEC_IRQ_SCC1A_TXERR] = IO_IRQ_NR(IO_INR_SCC1A_TXERR),
[DEC_IRQ_SCC1A_TXDMA] = IO_IRQ_NR(IO_INR_SCC1A_TXDMA),
};
static int_ptr kn02ba_cpu_mask_nr_tbl[][2] __initdata = {
{ { .i = DEC_CPU_IRQ_MASK(KN02BA_CPU_INR_CASCADE) },
{ .p = kn02xa_io_int } },
{ { .i = DEC_CPU_IRQ_MASK(KN02BA_CPU_INR_TC2) },
{ .i = DEC_CPU_IRQ_NR(KN02BA_CPU_INR_TC2) } },
{ { .i = DEC_CPU_IRQ_MASK(KN02BA_CPU_INR_TC1) },
{ .i = DEC_CPU_IRQ_NR(KN02BA_CPU_INR_TC1) } },
{ { .i = DEC_CPU_IRQ_MASK(KN02BA_CPU_INR_TC0) },
{ .i = DEC_CPU_IRQ_NR(KN02BA_CPU_INR_TC0) } },
{ { .i = DEC_CPU_IRQ_ALL },
{ .p = cpu_all_int } },
};
static int_ptr kn02ba_asic_mask_nr_tbl[][2] __initdata = {
{ { .i = IO_IRQ_MASK(KN02BA_IO_INR_BUS) },
{ .i = IO_IRQ_NR(KN02BA_IO_INR_BUS) } },
{ { .i = IO_IRQ_MASK(KN02BA_IO_INR_RTC) },
{ .i = IO_IRQ_NR(KN02BA_IO_INR_RTC) } },
{ { .i = IO_IRQ_DMA },
{ .p = asic_dma_int } },
{ { .i = IO_IRQ_MASK(KN02BA_IO_INR_SCC0) },
{ .i = IO_IRQ_NR(KN02BA_IO_INR_SCC0) } },
{ { .i = IO_IRQ_MASK(KN02BA_IO_INR_SCC1) },
{ .i = IO_IRQ_NR(KN02BA_IO_INR_SCC1) } },
{ { .i = IO_IRQ_MASK(KN02BA_IO_INR_ASC) },
{ .i = IO_IRQ_NR(KN02BA_IO_INR_ASC) } },
{ { .i = IO_IRQ_MASK(KN02BA_IO_INR_LANCE) },
{ .i = IO_IRQ_NR(KN02BA_IO_INR_LANCE) } },
{ { .i = IO_IRQ_ALL },
{ .p = asic_all_int } },
};
Make static what ought to be static. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-08-26 21:36:42 +08:00
static void __init dec_init_kn02ba(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn02ba_interrupt,
sizeof(kn02ba_interrupt));
/* CPU IRQ priorities. */
memcpy(&cpu_mask_nr_tbl, &kn02ba_cpu_mask_nr_tbl,
sizeof(kn02ba_cpu_mask_nr_tbl));
/* I/O ASIC IRQ priorities. */
memcpy(&asic_mask_nr_tbl, &kn02ba_asic_mask_nr_tbl,
sizeof(kn02ba_asic_mask_nr_tbl));
[MIPS] Define MIPS_CPU_IRQ_BASE in generic header The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-01-08 01:14:29 +08:00
mips_cpu_irq_init();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
init_ioasic_irqs(IO_IRQ_BASE);
} /* dec_init_kn02ba */
/*
* Machine-specific initialisation for KN02-CA, aka DS5000/xx,
* (xx = 20, 25, 33), aka MAXine. Also applies to KN04(-CA), aka
* DS5000/50, aka 4MAXine.
*/
static int kn02ca_interrupt[DEC_NR_INTS] __initdata = {
[DEC_IRQ_CASCADE] = DEC_CPU_IRQ_NR(KN02CA_CPU_INR_CASCADE),
[DEC_IRQ_AB_RECV] = IO_IRQ_NR(KN02CA_IO_INR_AB_RECV),
[DEC_IRQ_AB_XMIT] = IO_IRQ_NR(KN02CA_IO_INR_AB_XMIT),
[DEC_IRQ_DZ11] = -1,
[DEC_IRQ_ASC] = IO_IRQ_NR(KN02CA_IO_INR_ASC),
[DEC_IRQ_FLOPPY] = IO_IRQ_NR(KN02CA_IO_INR_FLOPPY),
[DEC_IRQ_FPU] = DEC_CPU_IRQ_NR(DEC_CPU_INR_FPU),
[DEC_IRQ_HALT] = DEC_CPU_IRQ_NR(KN02CA_CPU_INR_HALT),
[DEC_IRQ_ISDN] = IO_IRQ_NR(KN02CA_IO_INR_ISDN),
[DEC_IRQ_LANCE] = IO_IRQ_NR(KN02CA_IO_INR_LANCE),
[DEC_IRQ_BUS] = DEC_CPU_IRQ_NR(KN02CA_CPU_INR_BUS),
[DEC_IRQ_PSU] = -1,
[DEC_IRQ_RTC] = DEC_CPU_IRQ_NR(KN02CA_CPU_INR_RTC),
[DEC_IRQ_SCC0] = IO_IRQ_NR(KN02CA_IO_INR_SCC0),
[DEC_IRQ_SCC1] = -1,
[DEC_IRQ_SII] = -1,
[DEC_IRQ_TC0] = IO_IRQ_NR(KN02CA_IO_INR_TC0),
[DEC_IRQ_TC1] = IO_IRQ_NR(KN02CA_IO_INR_TC1),
[DEC_IRQ_TC2] = -1,
[DEC_IRQ_TIMER] = DEC_CPU_IRQ_NR(KN02CA_CPU_INR_TIMER),
[DEC_IRQ_VIDEO] = IO_IRQ_NR(KN02CA_IO_INR_VIDEO),
[DEC_IRQ_ASC_MERR] = IO_IRQ_NR(IO_INR_ASC_MERR),
[DEC_IRQ_ASC_ERR] = IO_IRQ_NR(IO_INR_ASC_ERR),
[DEC_IRQ_ASC_DMA] = IO_IRQ_NR(IO_INR_ASC_DMA),
[DEC_IRQ_FLOPPY_ERR] = IO_IRQ_NR(IO_INR_FLOPPY_ERR),
[DEC_IRQ_ISDN_ERR] = IO_IRQ_NR(IO_INR_ISDN_ERR),
[DEC_IRQ_ISDN_RXDMA] = IO_IRQ_NR(IO_INR_ISDN_RXDMA),
[DEC_IRQ_ISDN_TXDMA] = IO_IRQ_NR(IO_INR_ISDN_TXDMA),
[DEC_IRQ_LANCE_MERR] = IO_IRQ_NR(IO_INR_LANCE_MERR),
[DEC_IRQ_SCC0A_RXERR] = IO_IRQ_NR(IO_INR_SCC0A_RXERR),
[DEC_IRQ_SCC0A_RXDMA] = IO_IRQ_NR(IO_INR_SCC0A_RXDMA),
[DEC_IRQ_SCC0A_TXERR] = IO_IRQ_NR(IO_INR_SCC0A_TXERR),
[DEC_IRQ_SCC0A_TXDMA] = IO_IRQ_NR(IO_INR_SCC0A_TXDMA),
[DEC_IRQ_AB_RXERR] = IO_IRQ_NR(IO_INR_AB_RXERR),
[DEC_IRQ_AB_RXDMA] = IO_IRQ_NR(IO_INR_AB_RXDMA),
[DEC_IRQ_AB_TXERR] = IO_IRQ_NR(IO_INR_AB_TXERR),
[DEC_IRQ_AB_TXDMA] = IO_IRQ_NR(IO_INR_AB_TXDMA),
[DEC_IRQ_SCC1A_RXERR] = -1,
[DEC_IRQ_SCC1A_RXDMA] = -1,
[DEC_IRQ_SCC1A_TXERR] = -1,
[DEC_IRQ_SCC1A_TXDMA] = -1,
};
static int_ptr kn02ca_cpu_mask_nr_tbl[][2] __initdata = {
{ { .i = DEC_CPU_IRQ_MASK(KN02CA_CPU_INR_BUS) },
{ .i = DEC_CPU_IRQ_NR(KN02CA_CPU_INR_BUS) } },
{ { .i = DEC_CPU_IRQ_MASK(KN02CA_CPU_INR_RTC) },
{ .i = DEC_CPU_IRQ_NR(KN02CA_CPU_INR_RTC) } },
{ { .i = DEC_CPU_IRQ_MASK(KN02CA_CPU_INR_CASCADE) },
{ .p = kn02xa_io_int } },
{ { .i = DEC_CPU_IRQ_ALL },
{ .p = cpu_all_int } },
};
static int_ptr kn02ca_asic_mask_nr_tbl[][2] __initdata = {
{ { .i = IO_IRQ_DMA },
{ .p = asic_dma_int } },
{ { .i = IO_IRQ_MASK(KN02CA_IO_INR_SCC0) },
{ .i = IO_IRQ_NR(KN02CA_IO_INR_SCC0) } },
{ { .i = IO_IRQ_MASK(KN02CA_IO_INR_ASC) },
{ .i = IO_IRQ_NR(KN02CA_IO_INR_ASC) } },
{ { .i = IO_IRQ_MASK(KN02CA_IO_INR_LANCE) },
{ .i = IO_IRQ_NR(KN02CA_IO_INR_LANCE) } },
{ { .i = IO_IRQ_MASK(KN02CA_IO_INR_TC1) },
{ .i = IO_IRQ_NR(KN02CA_IO_INR_TC1) } },
{ { .i = IO_IRQ_MASK(KN02CA_IO_INR_TC0) },
{ .i = IO_IRQ_NR(KN02CA_IO_INR_TC0) } },
{ { .i = IO_IRQ_ALL },
{ .p = asic_all_int } },
};
Make static what ought to be static. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-08-26 21:36:42 +08:00
static void __init dec_init_kn02ca(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn02ca_interrupt,
sizeof(kn02ca_interrupt));
/* CPU IRQ priorities. */
memcpy(&cpu_mask_nr_tbl, &kn02ca_cpu_mask_nr_tbl,
sizeof(kn02ca_cpu_mask_nr_tbl));
/* I/O ASIC IRQ priorities. */
memcpy(&asic_mask_nr_tbl, &kn02ca_asic_mask_nr_tbl,
sizeof(kn02ca_asic_mask_nr_tbl));
[MIPS] Define MIPS_CPU_IRQ_BASE in generic header The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-01-08 01:14:29 +08:00
mips_cpu_irq_init();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
init_ioasic_irqs(IO_IRQ_BASE);
} /* dec_init_kn02ca */
/*
* Machine-specific initialisation for KN03, aka DS5000/240,
* aka 3max+ and DS5900, aka BIGmax. Also applies to KN05, aka
* DS5000/260, aka 4max+ and DS5900/260.
*/
static int kn03_interrupt[DEC_NR_INTS] __initdata = {
[DEC_IRQ_CASCADE] = DEC_CPU_IRQ_NR(KN03_CPU_INR_CASCADE),
[DEC_IRQ_AB_RECV] = -1,
[DEC_IRQ_AB_XMIT] = -1,
[DEC_IRQ_DZ11] = -1,
[DEC_IRQ_ASC] = IO_IRQ_NR(KN03_IO_INR_ASC),
[DEC_IRQ_FLOPPY] = -1,
[DEC_IRQ_FPU] = DEC_CPU_IRQ_NR(DEC_CPU_INR_FPU),
[DEC_IRQ_HALT] = DEC_CPU_IRQ_NR(KN03_CPU_INR_HALT),
[DEC_IRQ_ISDN] = -1,
[DEC_IRQ_LANCE] = IO_IRQ_NR(KN03_IO_INR_LANCE),
[DEC_IRQ_BUS] = DEC_CPU_IRQ_NR(KN03_CPU_INR_BUS),
[DEC_IRQ_PSU] = IO_IRQ_NR(KN03_IO_INR_PSU),
[DEC_IRQ_RTC] = DEC_CPU_IRQ_NR(KN03_CPU_INR_RTC),
[DEC_IRQ_SCC0] = IO_IRQ_NR(KN03_IO_INR_SCC0),
[DEC_IRQ_SCC1] = IO_IRQ_NR(KN03_IO_INR_SCC1),
[DEC_IRQ_SII] = -1,
[DEC_IRQ_TC0] = IO_IRQ_NR(KN03_IO_INR_TC0),
[DEC_IRQ_TC1] = IO_IRQ_NR(KN03_IO_INR_TC1),
[DEC_IRQ_TC2] = IO_IRQ_NR(KN03_IO_INR_TC2),
[DEC_IRQ_TIMER] = -1,
[DEC_IRQ_VIDEO] = -1,
[DEC_IRQ_ASC_MERR] = IO_IRQ_NR(IO_INR_ASC_MERR),
[DEC_IRQ_ASC_ERR] = IO_IRQ_NR(IO_INR_ASC_ERR),
[DEC_IRQ_ASC_DMA] = IO_IRQ_NR(IO_INR_ASC_DMA),
[DEC_IRQ_FLOPPY_ERR] = -1,
[DEC_IRQ_ISDN_ERR] = -1,
[DEC_IRQ_ISDN_RXDMA] = -1,
[DEC_IRQ_ISDN_TXDMA] = -1,
[DEC_IRQ_LANCE_MERR] = IO_IRQ_NR(IO_INR_LANCE_MERR),
[DEC_IRQ_SCC0A_RXERR] = IO_IRQ_NR(IO_INR_SCC0A_RXERR),
[DEC_IRQ_SCC0A_RXDMA] = IO_IRQ_NR(IO_INR_SCC0A_RXDMA),
[DEC_IRQ_SCC0A_TXERR] = IO_IRQ_NR(IO_INR_SCC0A_TXERR),
[DEC_IRQ_SCC0A_TXDMA] = IO_IRQ_NR(IO_INR_SCC0A_TXDMA),
[DEC_IRQ_AB_RXERR] = -1,
[DEC_IRQ_AB_RXDMA] = -1,
[DEC_IRQ_AB_TXERR] = -1,
[DEC_IRQ_AB_TXDMA] = -1,
[DEC_IRQ_SCC1A_RXERR] = IO_IRQ_NR(IO_INR_SCC1A_RXERR),
[DEC_IRQ_SCC1A_RXDMA] = IO_IRQ_NR(IO_INR_SCC1A_RXDMA),
[DEC_IRQ_SCC1A_TXERR] = IO_IRQ_NR(IO_INR_SCC1A_TXERR),
[DEC_IRQ_SCC1A_TXDMA] = IO_IRQ_NR(IO_INR_SCC1A_TXDMA),
};
static int_ptr kn03_cpu_mask_nr_tbl[][2] __initdata = {
{ { .i = DEC_CPU_IRQ_MASK(KN03_CPU_INR_BUS) },
{ .i = DEC_CPU_IRQ_NR(KN03_CPU_INR_BUS) } },
{ { .i = DEC_CPU_IRQ_MASK(KN03_CPU_INR_RTC) },
{ .i = DEC_CPU_IRQ_NR(KN03_CPU_INR_RTC) } },
{ { .i = DEC_CPU_IRQ_MASK(KN03_CPU_INR_CASCADE) },
{ .p = kn03_io_int } },
{ { .i = DEC_CPU_IRQ_ALL },
{ .p = cpu_all_int } },
};
static int_ptr kn03_asic_mask_nr_tbl[][2] __initdata = {
{ { .i = IO_IRQ_DMA },
{ .p = asic_dma_int } },
{ { .i = IO_IRQ_MASK(KN03_IO_INR_SCC0) },
{ .i = IO_IRQ_NR(KN03_IO_INR_SCC0) } },
{ { .i = IO_IRQ_MASK(KN03_IO_INR_SCC1) },
{ .i = IO_IRQ_NR(KN03_IO_INR_SCC1) } },
{ { .i = IO_IRQ_MASK(KN03_IO_INR_ASC) },
{ .i = IO_IRQ_NR(KN03_IO_INR_ASC) } },
{ { .i = IO_IRQ_MASK(KN03_IO_INR_LANCE) },
{ .i = IO_IRQ_NR(KN03_IO_INR_LANCE) } },
{ { .i = IO_IRQ_MASK(KN03_IO_INR_TC2) },
{ .i = IO_IRQ_NR(KN03_IO_INR_TC2) } },
{ { .i = IO_IRQ_MASK(KN03_IO_INR_TC1) },
{ .i = IO_IRQ_NR(KN03_IO_INR_TC1) } },
{ { .i = IO_IRQ_MASK(KN03_IO_INR_TC0) },
{ .i = IO_IRQ_NR(KN03_IO_INR_TC0) } },
{ { .i = IO_IRQ_ALL },
{ .p = asic_all_int } },
};
Make static what ought to be static. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-08-26 21:36:42 +08:00
static void __init dec_init_kn03(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn03_interrupt,
sizeof(kn03_interrupt));
/* CPU IRQ priorities. */
memcpy(&cpu_mask_nr_tbl, &kn03_cpu_mask_nr_tbl,
sizeof(kn03_cpu_mask_nr_tbl));
/* I/O ASIC IRQ priorities. */
memcpy(&asic_mask_nr_tbl, &kn03_asic_mask_nr_tbl,
sizeof(kn03_asic_mask_nr_tbl));
[MIPS] Define MIPS_CPU_IRQ_BASE in generic header The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-01-08 01:14:29 +08:00
mips_cpu_irq_init();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
init_ioasic_irqs(IO_IRQ_BASE);
} /* dec_init_kn03 */
void __init arch_init_irq(void)
{
switch (mips_machtype) {
case MACH_DS23100: /* DS2100/DS3100 Pmin/Pmax */
dec_init_kn01();
break;
case MACH_DS5100: /* DS5100 MIPSmate */
dec_init_kn230();
break;
case MACH_DS5000_200: /* DS5000/200 3max */
dec_init_kn02();
break;
case MACH_DS5000_1XX: /* DS5000/1xx 3min */
dec_init_kn02ba();
break;
case MACH_DS5000_2X0: /* DS5000/240 3max+ */
case MACH_DS5900: /* DS5900 bigmax */
dec_init_kn03();
break;
case MACH_DS5000_XX: /* Personal DS5000/xx */
dec_init_kn02ca();
break;
case MACH_DS5800: /* DS5800 Isis */
panic("Don't know how to set this up!");
break;
case MACH_DS5400: /* DS5400 MIPSfair */
panic("Don't know how to set this up!");
break;
case MACH_DS5500: /* DS5500 MIPSfair-2 */
panic("Don't know how to set this up!");
break;
}
/* Free the FPU interrupt if the exception is present. */
if (!cpu_has_nofpuex) {
cpu_fpu_mask = 0;
dec_interrupt[DEC_IRQ_FPU] = -1;
}
MIPS: DEC: Remove the Halt button interrupt on R4k systems On R4k DECstations the Halt button is wired to the NMI processor input rather than an ordinary interrupt input such as on R3k DECstations. This is possible with a different design of the CPU daughtercard that routes the Halt button line from the baseboard connector. Additionally the interrupt input has been reused for a different purpose on the KN04 and KN05 R4k CPU daughtercards so it is better kept masked. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-04-07 05:06:28 +08:00
/* Free the halt interrupt unused on R4k systems. */
if (current_cpu_type() == CPU_R4000SC ||
current_cpu_type() == CPU_R4400SC)
dec_interrupt[DEC_IRQ_HALT] = -1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Register board interrupts: FPU and cascade. */
if (dec_interrupt[DEC_IRQ_FPU] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_FPU], &fpuirq);
if (dec_interrupt[DEC_IRQ_CASCADE] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_CASCADE], &ioirq);
/* Register the bus error interrupt. */
if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq.handler)
setup_irq(dec_interrupt[DEC_IRQ_BUS], &busirq);
/* Register the HALT interrupt. */
if (dec_interrupt[DEC_IRQ_HALT] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
}
[MIPS] do_IRQ cleanup Now we have both function and macro version of do_IRQ() and the former is used only by DEC and non-preemptive kernel. This patch makes everyone use the macro version and removes the function version. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-25 22:57:04 +08:00
asmlinkage unsigned int dec_irq_dispatch(unsigned int irq)
{
do_IRQ(irq);
return 0;
}
Copy Permalink