2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 08:44:14 +08:00
linux-next/net/batman-adv/multicast.c

1591 lines
48 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/* Copyright (C) 2014-2018 B.A.T.M.A.N. contributors:
*
* Linus Lüssing
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "multicast.h"
2015-04-18 01:40:28 +08:00
#include "main.h"
#include <linux/atomic.h>
#include <linux/bitops.h>
#include <linux/bug.h>
2015-04-18 01:40:28 +08:00
#include <linux/byteorder/generic.h>
#include <linux/errno.h>
#include <linux/etherdevice.h>
#include <linux/gfp.h>
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
#include <linux/icmpv6.h>
#include <linux/if_bridge.h>
2015-04-18 01:40:28 +08:00
#include <linux/if_ether.h>
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
#include <linux/igmp.h>
2015-04-18 01:40:28 +08:00
#include <linux/in.h>
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
#include <linux/in6.h>
2015-04-18 01:40:28 +08:00
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/kref.h>
2015-04-18 01:40:28 +08:00
#include <linux/list.h>
#include <linux/lockdep.h>
2015-04-18 01:40:28 +08:00
#include <linux/netdevice.h>
#include <linux/netlink.h>
#include <linux/printk.h>
2015-04-18 01:40:28 +08:00
#include <linux/rculist.h>
#include <linux/rcupdate.h>
#include <linux/seq_file.h>
2015-04-18 01:40:28 +08:00
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/workqueue.h>
2015-04-18 01:40:28 +08:00
#include <net/addrconf.h>
#include <net/genetlink.h>
#include <net/if_inet6.h>
#include <net/ip.h>
2015-04-18 01:40:28 +08:00
#include <net/ipv6.h>
#include <net/netlink.h>
#include <net/sock.h>
#include <uapi/linux/batadv_packet.h>
#include <uapi/linux/batman_adv.h>
2015-04-18 01:40:28 +08:00
#include "hard-interface.h"
#include "hash.h"
#include "log.h"
#include "netlink.h"
#include "soft-interface.h"
#include "translation-table.h"
#include "tvlv.h"
static void batadv_mcast_mla_update(struct work_struct *work);
/**
* batadv_mcast_start_timer() - schedule the multicast periodic worker
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_mcast_start_timer(struct batadv_priv *bat_priv)
{
queue_delayed_work(batadv_event_workqueue, &bat_priv->mcast.work,
msecs_to_jiffies(BATADV_MCAST_WORK_PERIOD));
}
/**
* batadv_mcast_get_bridge() - get the bridge on top of the softif if it exists
* @soft_iface: netdev struct of the mesh interface
*
* If the given soft interface has a bridge on top then the refcount
* of the according net device is increased.
*
* Return: NULL if no such bridge exists. Otherwise the net device of the
* bridge.
*/
static struct net_device *batadv_mcast_get_bridge(struct net_device *soft_iface)
{
struct net_device *upper = soft_iface;
rcu_read_lock();
do {
upper = netdev_master_upper_dev_get_rcu(upper);
} while (upper && !(upper->priv_flags & IFF_EBRIDGE));
if (upper)
dev_hold(upper);
rcu_read_unlock();
return upper;
}
/**
* batadv_mcast_addr_is_ipv4() - check if multicast MAC is IPv4
* @addr: the MAC address to check
*
* Return: True, if MAC address is one reserved for IPv4 multicast, false
* otherwise.
*/
static bool batadv_mcast_addr_is_ipv4(const u8 *addr)
{
static const u8 prefix[] = {0x01, 0x00, 0x5E};
return memcmp(prefix, addr, sizeof(prefix)) == 0;
}
/**
* batadv_mcast_addr_is_ipv6() - check if multicast MAC is IPv6
* @addr: the MAC address to check
*
* Return: True, if MAC address is one reserved for IPv6 multicast, false
* otherwise.
*/
static bool batadv_mcast_addr_is_ipv6(const u8 *addr)
{
static const u8 prefix[] = {0x33, 0x33};
return memcmp(prefix, addr, sizeof(prefix)) == 0;
}
/**
* batadv_mcast_mla_softif_get() - get softif multicast listeners
* @bat_priv: the bat priv with all the soft interface information
* @dev: the device to collect multicast addresses from
* @mcast_list: a list to put found addresses into
*
* Collects multicast addresses of multicast listeners residing
* on this kernel on the given soft interface, dev, in
* the given mcast_list. In general, multicast listeners provided by
* your multicast receiving applications run directly on this node.
*
* If there is a bridge interface on top of dev, collects from that one
* instead. Just like with IP addresses and routes, multicast listeners
* will(/should) register to the bridge interface instead of an
* enslaved bat0.
*
* Return: -ENOMEM on memory allocation error or the number of
* items added to the mcast_list otherwise.
*/
static int batadv_mcast_mla_softif_get(struct batadv_priv *bat_priv,
struct net_device *dev,
struct hlist_head *mcast_list)
{
bool all_ipv4 = bat_priv->mcast.flags & BATADV_MCAST_WANT_ALL_IPV4;
bool all_ipv6 = bat_priv->mcast.flags & BATADV_MCAST_WANT_ALL_IPV6;
struct net_device *bridge = batadv_mcast_get_bridge(dev);
struct netdev_hw_addr *mc_list_entry;
struct batadv_hw_addr *new;
int ret = 0;
netif_addr_lock_bh(bridge ? bridge : dev);
netdev_for_each_mc_addr(mc_list_entry, bridge ? bridge : dev) {
if (all_ipv4 && batadv_mcast_addr_is_ipv4(mc_list_entry->addr))
continue;
if (all_ipv6 && batadv_mcast_addr_is_ipv6(mc_list_entry->addr))
continue;
new = kmalloc(sizeof(*new), GFP_ATOMIC);
if (!new) {
ret = -ENOMEM;
break;
}
ether_addr_copy(new->addr, mc_list_entry->addr);
hlist_add_head(&new->list, mcast_list);
ret++;
}
netif_addr_unlock_bh(bridge ? bridge : dev);
if (bridge)
dev_put(bridge);
return ret;
}
/**
* batadv_mcast_mla_is_duplicate() - check whether an address is in a list
* @mcast_addr: the multicast address to check
* @mcast_list: the list with multicast addresses to search in
*
* Return: true if the given address is already in the given list.
* Otherwise returns false.
*/
static bool batadv_mcast_mla_is_duplicate(u8 *mcast_addr,
struct hlist_head *mcast_list)
{
struct batadv_hw_addr *mcast_entry;
hlist_for_each_entry(mcast_entry, mcast_list, list)
if (batadv_compare_eth(mcast_entry->addr, mcast_addr))
return true;
return false;
}
/**
* batadv_mcast_mla_br_addr_cpy() - copy a bridge multicast address
* @dst: destination to write to - a multicast MAC address
* @src: source to read from - a multicast IP address
*
* Converts a given multicast IPv4/IPv6 address from a bridge
* to its matching multicast MAC address and copies it into the given
* destination buffer.
*
* Caller needs to make sure the destination buffer can hold
* at least ETH_ALEN bytes.
*/
static void batadv_mcast_mla_br_addr_cpy(char *dst, const struct br_ip *src)
{
if (src->proto == htons(ETH_P_IP))
ip_eth_mc_map(src->u.ip4, dst);
#if IS_ENABLED(CONFIG_IPV6)
else if (src->proto == htons(ETH_P_IPV6))
ipv6_eth_mc_map(&src->u.ip6, dst);
#endif
else
eth_zero_addr(dst);
}
/**
* batadv_mcast_mla_bridge_get() - get bridged-in multicast listeners
* @bat_priv: the bat priv with all the soft interface information
* @dev: a bridge slave whose bridge to collect multicast addresses from
* @mcast_list: a list to put found addresses into
*
* Collects multicast addresses of multicast listeners residing
* on foreign, non-mesh devices which we gave access to our mesh via
* a bridge on top of the given soft interface, dev, in the given
* mcast_list.
*
* Return: -ENOMEM on memory allocation error or the number of
* items added to the mcast_list otherwise.
*/
static int batadv_mcast_mla_bridge_get(struct batadv_priv *bat_priv,
struct net_device *dev,
struct hlist_head *mcast_list)
{
struct list_head bridge_mcast_list = LIST_HEAD_INIT(bridge_mcast_list);
bool all_ipv4 = bat_priv->mcast.flags & BATADV_MCAST_WANT_ALL_IPV4;
bool all_ipv6 = bat_priv->mcast.flags & BATADV_MCAST_WANT_ALL_IPV6;
struct br_ip_list *br_ip_entry, *tmp;
struct batadv_hw_addr *new;
u8 mcast_addr[ETH_ALEN];
int ret;
/* we don't need to detect these devices/listeners, the IGMP/MLD
* snooping code of the Linux bridge already does that for us
*/
ret = br_multicast_list_adjacent(dev, &bridge_mcast_list);
if (ret < 0)
goto out;
list_for_each_entry(br_ip_entry, &bridge_mcast_list, list) {
if (all_ipv4 && br_ip_entry->addr.proto == htons(ETH_P_IP))
continue;
if (all_ipv6 && br_ip_entry->addr.proto == htons(ETH_P_IPV6))
continue;
batadv_mcast_mla_br_addr_cpy(mcast_addr, &br_ip_entry->addr);
if (batadv_mcast_mla_is_duplicate(mcast_addr, mcast_list))
continue;
new = kmalloc(sizeof(*new), GFP_ATOMIC);
if (!new) {
ret = -ENOMEM;
break;
}
ether_addr_copy(new->addr, mcast_addr);
hlist_add_head(&new->list, mcast_list);
}
out:
list_for_each_entry_safe(br_ip_entry, tmp, &bridge_mcast_list, list) {
list_del(&br_ip_entry->list);
kfree(br_ip_entry);
}
return ret;
}
/**
* batadv_mcast_mla_list_free() - free a list of multicast addresses
* @mcast_list: the list to free
*
* Removes and frees all items in the given mcast_list.
*/
static void batadv_mcast_mla_list_free(struct hlist_head *mcast_list)
{
struct batadv_hw_addr *mcast_entry;
struct hlist_node *tmp;
hlist_for_each_entry_safe(mcast_entry, tmp, mcast_list, list) {
hlist_del(&mcast_entry->list);
kfree(mcast_entry);
}
}
/**
* batadv_mcast_mla_tt_retract() - clean up multicast listener announcements
* @bat_priv: the bat priv with all the soft interface information
* @mcast_list: a list of addresses which should _not_ be removed
*
* Retracts the announcement of any multicast listener from the
* translation table except the ones listed in the given mcast_list.
*
* If mcast_list is NULL then all are retracted.
*
* Do not call outside of the mcast worker! (or cancel mcast worker first)
*/
static void batadv_mcast_mla_tt_retract(struct batadv_priv *bat_priv,
struct hlist_head *mcast_list)
{
struct batadv_hw_addr *mcast_entry;
struct hlist_node *tmp;
WARN_ON(delayed_work_pending(&bat_priv->mcast.work));
hlist_for_each_entry_safe(mcast_entry, tmp, &bat_priv->mcast.mla_list,
list) {
if (mcast_list &&
batadv_mcast_mla_is_duplicate(mcast_entry->addr,
mcast_list))
continue;
batadv_tt_local_remove(bat_priv, mcast_entry->addr,
BATADV_NO_FLAGS,
"mcast TT outdated", false);
hlist_del(&mcast_entry->list);
kfree(mcast_entry);
}
}
/**
* batadv_mcast_mla_tt_add() - add multicast listener announcements
* @bat_priv: the bat priv with all the soft interface information
* @mcast_list: a list of addresses which are going to get added
*
* Adds multicast listener announcements from the given mcast_list to the
* translation table if they have not been added yet.
*
* Do not call outside of the mcast worker! (or cancel mcast worker first)
*/
static void batadv_mcast_mla_tt_add(struct batadv_priv *bat_priv,
struct hlist_head *mcast_list)
{
struct batadv_hw_addr *mcast_entry;
struct hlist_node *tmp;
WARN_ON(delayed_work_pending(&bat_priv->mcast.work));
if (!mcast_list)
return;
hlist_for_each_entry_safe(mcast_entry, tmp, mcast_list, list) {
if (batadv_mcast_mla_is_duplicate(mcast_entry->addr,
&bat_priv->mcast.mla_list))
continue;
if (!batadv_tt_local_add(bat_priv->soft_iface,
mcast_entry->addr, BATADV_NO_FLAGS,
BATADV_NULL_IFINDEX, BATADV_NO_MARK))
continue;
hlist_del(&mcast_entry->list);
hlist_add_head(&mcast_entry->list, &bat_priv->mcast.mla_list);
}
}
/**
* batadv_mcast_has_bridge() - check whether the soft-iface is bridged
* @bat_priv: the bat priv with all the soft interface information
*
* Checks whether there is a bridge on top of our soft interface.
*
* Return: true if there is a bridge, false otherwise.
*/
static bool batadv_mcast_has_bridge(struct batadv_priv *bat_priv)
{
struct net_device *upper = bat_priv->soft_iface;
rcu_read_lock();
do {
upper = netdev_master_upper_dev_get_rcu(upper);
} while (upper && !(upper->priv_flags & IFF_EBRIDGE));
rcu_read_unlock();
return upper;
}
/**
* batadv_mcast_querier_log() - debug output regarding the querier status on
* link
* @bat_priv: the bat priv with all the soft interface information
* @str_proto: a string for the querier protocol (e.g. "IGMP" or "MLD")
* @old_state: the previous querier state on our link
* @new_state: the new querier state on our link
*
* Outputs debug messages to the logging facility with log level 'mcast'
* regarding changes to the querier status on the link which are relevant
* to our multicast optimizations.
*
* Usually this is about whether a querier appeared or vanished in
* our mesh or whether the querier is in the suboptimal position of being
* behind our local bridge segment: Snooping switches will directly
* forward listener reports to the querier, therefore batman-adv and
* the bridge will potentially not see these listeners - the querier is
* potentially shadowing listeners from us then.
*
* This is only interesting for nodes with a bridge on top of their
* soft interface.
*/
static void
batadv_mcast_querier_log(struct batadv_priv *bat_priv, char *str_proto,
struct batadv_mcast_querier_state *old_state,
struct batadv_mcast_querier_state *new_state)
{
if (!old_state->exists && new_state->exists)
batadv_info(bat_priv->soft_iface, "%s Querier appeared\n",
str_proto);
else if (old_state->exists && !new_state->exists)
batadv_info(bat_priv->soft_iface,
"%s Querier disappeared - multicast optimizations disabled\n",
str_proto);
else if (!bat_priv->mcast.bridged && !new_state->exists)
batadv_info(bat_priv->soft_iface,
"No %s Querier present - multicast optimizations disabled\n",
str_proto);
if (new_state->exists) {
if ((!old_state->shadowing && new_state->shadowing) ||
(!old_state->exists && new_state->shadowing))
batadv_dbg(BATADV_DBG_MCAST, bat_priv,
"%s Querier is behind our bridged segment: Might shadow listeners\n",
str_proto);
else if (old_state->shadowing && !new_state->shadowing)
batadv_dbg(BATADV_DBG_MCAST, bat_priv,
"%s Querier is not behind our bridged segment\n",
str_proto);
}
}
/**
* batadv_mcast_bridge_log() - debug output for topology changes in bridged
* setups
* @bat_priv: the bat priv with all the soft interface information
* @bridged: a flag about whether the soft interface is currently bridged or not
* @querier_ipv4: (maybe) new status of a potential, selected IGMP querier
* @querier_ipv6: (maybe) new status of a potential, selected MLD querier
*
* If no bridges are ever used on this node, then this function does nothing.
*
* Otherwise this function outputs debug information to the 'mcast' log level
* which might be relevant to our multicast optimizations.
*
* More precisely, it outputs information when a bridge interface is added or
* removed from a soft interface. And when a bridge is present, it further
* outputs information about the querier state which is relevant for the
* multicast flags this node is going to set.
*/
static void
batadv_mcast_bridge_log(struct batadv_priv *bat_priv, bool bridged,
struct batadv_mcast_querier_state *querier_ipv4,
struct batadv_mcast_querier_state *querier_ipv6)
{
if (!bat_priv->mcast.bridged && bridged)
batadv_dbg(BATADV_DBG_MCAST, bat_priv,
"Bridge added: Setting Unsnoopables(U)-flag\n");
else if (bat_priv->mcast.bridged && !bridged)
batadv_dbg(BATADV_DBG_MCAST, bat_priv,
"Bridge removed: Unsetting Unsnoopables(U)-flag\n");
if (bridged) {
batadv_mcast_querier_log(bat_priv, "IGMP",
&bat_priv->mcast.querier_ipv4,
querier_ipv4);
batadv_mcast_querier_log(bat_priv, "MLD",
&bat_priv->mcast.querier_ipv6,
querier_ipv6);
}
}
/**
* batadv_mcast_flags_logs() - output debug information about mcast flag changes
* @bat_priv: the bat priv with all the soft interface information
* @flags: flags indicating the new multicast state
*
* Whenever the multicast flags this nodes announces changes (@mcast_flags vs.
* bat_priv->mcast.flags), this notifies userspace via the 'mcast' log level.
*/
static void batadv_mcast_flags_log(struct batadv_priv *bat_priv, u8 flags)
{
u8 old_flags = bat_priv->mcast.flags;
char str_old_flags[] = "[...]";
sprintf(str_old_flags, "[%c%c%c]",
(old_flags & BATADV_MCAST_WANT_ALL_UNSNOOPABLES) ? 'U' : '.',
(old_flags & BATADV_MCAST_WANT_ALL_IPV4) ? '4' : '.',
(old_flags & BATADV_MCAST_WANT_ALL_IPV6) ? '6' : '.');
batadv_dbg(BATADV_DBG_MCAST, bat_priv,
"Changing multicast flags from '%s' to '[%c%c%c]'\n",
bat_priv->mcast.enabled ? str_old_flags : "<undefined>",
(flags & BATADV_MCAST_WANT_ALL_UNSNOOPABLES) ? 'U' : '.',
(flags & BATADV_MCAST_WANT_ALL_IPV4) ? '4' : '.',
(flags & BATADV_MCAST_WANT_ALL_IPV6) ? '6' : '.');
}
/**
* batadv_mcast_mla_tvlv_update() - update multicast tvlv
* @bat_priv: the bat priv with all the soft interface information
*
* Updates the own multicast tvlv with our current multicast related settings,
* capabilities and inabilities.
*
* Return: false if we want all IPv4 && IPv6 multicast traffic and true
* otherwise.
*/
static bool batadv_mcast_mla_tvlv_update(struct batadv_priv *bat_priv)
{
struct batadv_tvlv_mcast_data mcast_data;
struct batadv_mcast_querier_state querier4 = {false, false};
struct batadv_mcast_querier_state querier6 = {false, false};
struct net_device *dev = bat_priv->soft_iface;
bool bridged;
mcast_data.flags = BATADV_NO_FLAGS;
memset(mcast_data.reserved, 0, sizeof(mcast_data.reserved));
bridged = batadv_mcast_has_bridge(bat_priv);
if (!bridged)
goto update;
if (!IS_ENABLED(CONFIG_BRIDGE_IGMP_SNOOPING))
pr_warn_once("No bridge IGMP snooping compiled - multicast optimizations disabled\n");
querier4.exists = br_multicast_has_querier_anywhere(dev, ETH_P_IP);
querier4.shadowing = br_multicast_has_querier_adjacent(dev, ETH_P_IP);
querier6.exists = br_multicast_has_querier_anywhere(dev, ETH_P_IPV6);
querier6.shadowing = br_multicast_has_querier_adjacent(dev, ETH_P_IPV6);
mcast_data.flags |= BATADV_MCAST_WANT_ALL_UNSNOOPABLES;
/* 1) If no querier exists at all, then multicast listeners on
* our local TT clients behind the bridge will keep silent.
* 2) If the selected querier is on one of our local TT clients,
* behind the bridge, then this querier might shadow multicast
* listeners on our local TT clients, behind this bridge.
*
* In both cases, we will signalize other batman nodes that
* we need all multicast traffic of the according protocol.
*/
if (!querier4.exists || querier4.shadowing)
mcast_data.flags |= BATADV_MCAST_WANT_ALL_IPV4;
if (!querier6.exists || querier6.shadowing)
mcast_data.flags |= BATADV_MCAST_WANT_ALL_IPV6;
update:
batadv_mcast_bridge_log(bat_priv, bridged, &querier4, &querier6);
bat_priv->mcast.querier_ipv4.exists = querier4.exists;
bat_priv->mcast.querier_ipv4.shadowing = querier4.shadowing;
bat_priv->mcast.querier_ipv6.exists = querier6.exists;
bat_priv->mcast.querier_ipv6.shadowing = querier6.shadowing;
bat_priv->mcast.bridged = bridged;
if (!bat_priv->mcast.enabled ||
mcast_data.flags != bat_priv->mcast.flags) {
batadv_mcast_flags_log(bat_priv, mcast_data.flags);
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
batadv_tvlv_container_register(bat_priv, BATADV_TVLV_MCAST, 2,
&mcast_data, sizeof(mcast_data));
bat_priv->mcast.flags = mcast_data.flags;
bat_priv->mcast.enabled = true;
}
return !(mcast_data.flags & BATADV_MCAST_WANT_ALL_IPV4 &&
mcast_data.flags & BATADV_MCAST_WANT_ALL_IPV6);
}
/**
* __batadv_mcast_mla_update() - update the own MLAs
* @bat_priv: the bat priv with all the soft interface information
*
* Updates the own multicast listener announcements in the translation
* table as well as the own, announced multicast tvlv container.
*
* Note that non-conflicting reads and writes to bat_priv->mcast.mla_list
* in batadv_mcast_mla_tt_retract() and batadv_mcast_mla_tt_add() are
* ensured by the non-parallel execution of the worker this function
* belongs to.
*/
static void __batadv_mcast_mla_update(struct batadv_priv *bat_priv)
{
struct net_device *soft_iface = bat_priv->soft_iface;
struct hlist_head mcast_list = HLIST_HEAD_INIT;
int ret;
if (!batadv_mcast_mla_tvlv_update(bat_priv))
goto update;
ret = batadv_mcast_mla_softif_get(bat_priv, soft_iface, &mcast_list);
if (ret < 0)
goto out;
ret = batadv_mcast_mla_bridge_get(bat_priv, soft_iface, &mcast_list);
if (ret < 0)
goto out;
update:
batadv_mcast_mla_tt_retract(bat_priv, &mcast_list);
batadv_mcast_mla_tt_add(bat_priv, &mcast_list);
out:
batadv_mcast_mla_list_free(&mcast_list);
}
/**
* batadv_mcast_mla_update() - update the own MLAs
* @work: kernel work struct
*
* Updates the own multicast listener announcements in the translation
* table as well as the own, announced multicast tvlv container.
*
* In the end, reschedules the work timer.
*/
static void batadv_mcast_mla_update(struct work_struct *work)
{
struct delayed_work *delayed_work;
struct batadv_priv_mcast *priv_mcast;
struct batadv_priv *bat_priv;
delayed_work = to_delayed_work(work);
priv_mcast = container_of(delayed_work, struct batadv_priv_mcast, work);
bat_priv = container_of(priv_mcast, struct batadv_priv, mcast);
__batadv_mcast_mla_update(bat_priv);
batadv_mcast_start_timer(bat_priv);
}
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
/**
* batadv_mcast_is_report_ipv4() -check for IGMP reports
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
* @skb: the ethernet frame destined for the mesh
*
* This call might reallocate skb data.
*
* Checks whether the given frame is a valid IGMP report.
*
* Return: If so then true, otherwise false.
*/
static bool batadv_mcast_is_report_ipv4(struct sk_buff *skb)
{
if (ip_mc_check_igmp(skb, NULL) < 0)
return false;
switch (igmp_hdr(skb)->type) {
case IGMP_HOST_MEMBERSHIP_REPORT:
case IGMPV2_HOST_MEMBERSHIP_REPORT:
case IGMPV3_HOST_MEMBERSHIP_REPORT:
return true;
}
return false;
}
/**
* batadv_mcast_forw_mode_check_ipv4() - check for optimized forwarding
* potential
* @bat_priv: the bat priv with all the soft interface information
* @skb: the IPv4 packet to check
* @is_unsnoopable: stores whether the destination is snoopable
*
* Checks whether the given IPv4 packet has the potential to be forwarded with a
* mode more optimal than classic flooding.
*
* Return: If so then 0. Otherwise -EINVAL or -ENOMEM in case of memory
* allocation failure.
*/
static int batadv_mcast_forw_mode_check_ipv4(struct batadv_priv *bat_priv,
struct sk_buff *skb,
bool *is_unsnoopable)
{
struct iphdr *iphdr;
/* We might fail due to out-of-memory -> drop it */
if (!pskb_may_pull(skb, sizeof(struct ethhdr) + sizeof(*iphdr)))
return -ENOMEM;
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
if (batadv_mcast_is_report_ipv4(skb))
return -EINVAL;
iphdr = ip_hdr(skb);
/* TODO: Implement Multicast Router Discovery (RFC4286),
* then allow scope > link local, too
*/
if (!ipv4_is_local_multicast(iphdr->daddr))
return -EINVAL;
/* link-local multicast listeners behind a bridge are
* not snoopable (see RFC4541, section 2.1.2.2)
*/
*is_unsnoopable = true;
return 0;
}
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
/**
* batadv_mcast_is_report_ipv6() - check for MLD reports
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
* @skb: the ethernet frame destined for the mesh
*
* This call might reallocate skb data.
*
* Checks whether the given frame is a valid MLD report.
*
* Return: If so then true, otherwise false.
*/
static bool batadv_mcast_is_report_ipv6(struct sk_buff *skb)
{
if (ipv6_mc_check_mld(skb, NULL) < 0)
return false;
switch (icmp6_hdr(skb)->icmp6_type) {
case ICMPV6_MGM_REPORT:
case ICMPV6_MLD2_REPORT:
return true;
}
return false;
}
/**
* batadv_mcast_forw_mode_check_ipv6() - check for optimized forwarding
* potential
* @bat_priv: the bat priv with all the soft interface information
* @skb: the IPv6 packet to check
* @is_unsnoopable: stores whether the destination is snoopable
*
* Checks whether the given IPv6 packet has the potential to be forwarded with a
* mode more optimal than classic flooding.
*
* Return: If so then 0. Otherwise -EINVAL is or -ENOMEM if we are out of memory
*/
static int batadv_mcast_forw_mode_check_ipv6(struct batadv_priv *bat_priv,
struct sk_buff *skb,
bool *is_unsnoopable)
{
struct ipv6hdr *ip6hdr;
/* We might fail due to out-of-memory -> drop it */
if (!pskb_may_pull(skb, sizeof(struct ethhdr) + sizeof(*ip6hdr)))
return -ENOMEM;
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
if (batadv_mcast_is_report_ipv6(skb))
return -EINVAL;
ip6hdr = ipv6_hdr(skb);
/* TODO: Implement Multicast Router Discovery (RFC4286),
* then allow scope > link local, too
*/
if (IPV6_ADDR_MC_SCOPE(&ip6hdr->daddr) != IPV6_ADDR_SCOPE_LINKLOCAL)
return -EINVAL;
/* link-local-all-nodes multicast listeners behind a bridge are
* not snoopable (see RFC4541, section 3, paragraph 3)
*/
if (ipv6_addr_is_ll_all_nodes(&ip6hdr->daddr))
*is_unsnoopable = true;
return 0;
}
/**
* batadv_mcast_forw_mode_check() - check for optimized forwarding potential
* @bat_priv: the bat priv with all the soft interface information
* @skb: the multicast frame to check
* @is_unsnoopable: stores whether the destination is snoopable
*
* Checks whether the given multicast ethernet frame has the potential to be
* forwarded with a mode more optimal than classic flooding.
*
* Return: If so then 0. Otherwise -EINVAL is or -ENOMEM if we are out of memory
*/
static int batadv_mcast_forw_mode_check(struct batadv_priv *bat_priv,
struct sk_buff *skb,
bool *is_unsnoopable)
{
struct ethhdr *ethhdr = eth_hdr(skb);
if (!atomic_read(&bat_priv->multicast_mode))
return -EINVAL;
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_IP:
return batadv_mcast_forw_mode_check_ipv4(bat_priv, skb,
is_unsnoopable);
case ETH_P_IPV6:
if (!IS_ENABLED(CONFIG_IPV6))
return -EINVAL;
return batadv_mcast_forw_mode_check_ipv6(bat_priv, skb,
is_unsnoopable);
default:
return -EINVAL;
}
}
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
/**
* batadv_mcast_forw_want_all_ip_count() - count nodes with unspecific mcast
* interest
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* @bat_priv: the bat priv with all the soft interface information
* @ethhdr: ethernet header of a packet
*
* Return: the number of nodes which want all IPv4 multicast traffic if the
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* given ethhdr is from an IPv4 packet or the number of nodes which want all
* IPv6 traffic if it matches an IPv6 packet.
*/
static int batadv_mcast_forw_want_all_ip_count(struct batadv_priv *bat_priv,
struct ethhdr *ethhdr)
{
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_IP:
return atomic_read(&bat_priv->mcast.num_want_all_ipv4);
case ETH_P_IPV6:
return atomic_read(&bat_priv->mcast.num_want_all_ipv6);
default:
/* we shouldn't be here... */
return 0;
}
}
/**
* batadv_mcast_forw_tt_node_get() - get a multicast tt node
* @bat_priv: the bat priv with all the soft interface information
* @ethhdr: the ether header containing the multicast destination
*
* Return: an orig_node matching the multicast address provided by ethhdr
* via a translation table lookup. This increases the returned nodes refcount.
*/
static struct batadv_orig_node *
batadv_mcast_forw_tt_node_get(struct batadv_priv *bat_priv,
struct ethhdr *ethhdr)
{
return batadv_transtable_search(bat_priv, NULL, ethhdr->h_dest,
BATADV_NO_FLAGS);
}
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
/**
* batadv_mcast_forw_ipv4_node_get() - get a node with an ipv4 flag
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* @bat_priv: the bat priv with all the soft interface information
*
* Return: an orig_node which has the BATADV_MCAST_WANT_ALL_IPV4 flag set and
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* increases its refcount.
*/
static struct batadv_orig_node *
batadv_mcast_forw_ipv4_node_get(struct batadv_priv *bat_priv)
{
struct batadv_orig_node *tmp_orig_node, *orig_node = NULL;
rcu_read_lock();
hlist_for_each_entry_rcu(tmp_orig_node,
&bat_priv->mcast.want_all_ipv4_list,
mcast_want_all_ipv4_node) {
if (!kref_get_unless_zero(&tmp_orig_node->refcount))
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
continue;
orig_node = tmp_orig_node;
break;
}
rcu_read_unlock();
return orig_node;
}
/**
* batadv_mcast_forw_ipv6_node_get() - get a node with an ipv6 flag
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* @bat_priv: the bat priv with all the soft interface information
*
* Return: an orig_node which has the BATADV_MCAST_WANT_ALL_IPV6 flag set
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* and increases its refcount.
*/
static struct batadv_orig_node *
batadv_mcast_forw_ipv6_node_get(struct batadv_priv *bat_priv)
{
struct batadv_orig_node *tmp_orig_node, *orig_node = NULL;
rcu_read_lock();
hlist_for_each_entry_rcu(tmp_orig_node,
&bat_priv->mcast.want_all_ipv6_list,
mcast_want_all_ipv6_node) {
if (!kref_get_unless_zero(&tmp_orig_node->refcount))
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
continue;
orig_node = tmp_orig_node;
break;
}
rcu_read_unlock();
return orig_node;
}
/**
* batadv_mcast_forw_ip_node_get() - get a node with an ipv4/ipv6 flag
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* @bat_priv: the bat priv with all the soft interface information
* @ethhdr: an ethernet header to determine the protocol family from
*
* Return: an orig_node which has the BATADV_MCAST_WANT_ALL_IPV4 or
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* BATADV_MCAST_WANT_ALL_IPV6 flag, depending on the provided ethhdr, set and
* increases its refcount.
*/
static struct batadv_orig_node *
batadv_mcast_forw_ip_node_get(struct batadv_priv *bat_priv,
struct ethhdr *ethhdr)
{
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_IP:
return batadv_mcast_forw_ipv4_node_get(bat_priv);
case ETH_P_IPV6:
return batadv_mcast_forw_ipv6_node_get(bat_priv);
default:
/* we shouldn't be here... */
return NULL;
}
}
/**
* batadv_mcast_forw_unsnoop_node_get() - get a node with an unsnoopable flag
* @bat_priv: the bat priv with all the soft interface information
*
* Return: an orig_node which has the BATADV_MCAST_WANT_ALL_UNSNOOPABLES flag
* set and increases its refcount.
*/
static struct batadv_orig_node *
batadv_mcast_forw_unsnoop_node_get(struct batadv_priv *bat_priv)
{
struct batadv_orig_node *tmp_orig_node, *orig_node = NULL;
rcu_read_lock();
hlist_for_each_entry_rcu(tmp_orig_node,
&bat_priv->mcast.want_all_unsnoopables_list,
mcast_want_all_unsnoopables_node) {
if (!kref_get_unless_zero(&tmp_orig_node->refcount))
continue;
orig_node = tmp_orig_node;
break;
}
rcu_read_unlock();
return orig_node;
}
/**
* batadv_mcast_forw_mode() - check on how to forward a multicast packet
* @bat_priv: the bat priv with all the soft interface information
* @skb: The multicast packet to check
* @orig: an originator to be set to forward the skb to
*
* Return: the forwarding mode as enum batadv_forw_mode and in case of
* BATADV_FORW_SINGLE set the orig to the single originator the skb
* should be forwarded to.
*/
enum batadv_forw_mode
batadv_mcast_forw_mode(struct batadv_priv *bat_priv, struct sk_buff *skb,
struct batadv_orig_node **orig)
{
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
int ret, tt_count, ip_count, unsnoop_count, total_count;
bool is_unsnoopable = false;
struct ethhdr *ethhdr;
ret = batadv_mcast_forw_mode_check(bat_priv, skb, &is_unsnoopable);
if (ret == -ENOMEM)
return BATADV_FORW_NONE;
else if (ret < 0)
return BATADV_FORW_ALL;
ethhdr = eth_hdr(skb);
tt_count = batadv_tt_global_hash_count(bat_priv, ethhdr->h_dest,
BATADV_NO_FLAGS);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
ip_count = batadv_mcast_forw_want_all_ip_count(bat_priv, ethhdr);
unsnoop_count = !is_unsnoopable ? 0 :
atomic_read(&bat_priv->mcast.num_want_all_unsnoopables);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
total_count = tt_count + ip_count + unsnoop_count;
switch (total_count) {
case 1:
if (tt_count)
*orig = batadv_mcast_forw_tt_node_get(bat_priv, ethhdr);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
else if (ip_count)
*orig = batadv_mcast_forw_ip_node_get(bat_priv, ethhdr);
else if (unsnoop_count)
*orig = batadv_mcast_forw_unsnoop_node_get(bat_priv);
if (*orig)
return BATADV_FORW_SINGLE;
/* fall through */
case 0:
return BATADV_FORW_NONE;
default:
return BATADV_FORW_ALL;
}
}
/**
* batadv_mcast_want_unsnoop_update() - update unsnoop counter and list
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node which multicast state might have changed of
* @mcast_flags: flags indicating the new multicast state
*
* If the BATADV_MCAST_WANT_ALL_UNSNOOPABLES flag of this originator,
* orig, has toggled then this method updates counter and list accordingly.
*
* Caller needs to hold orig->mcast_handler_lock.
*/
static void batadv_mcast_want_unsnoop_update(struct batadv_priv *bat_priv,
struct batadv_orig_node *orig,
u8 mcast_flags)
{
struct hlist_node *node = &orig->mcast_want_all_unsnoopables_node;
struct hlist_head *head = &bat_priv->mcast.want_all_unsnoopables_list;
lockdep_assert_held(&orig->mcast_handler_lock);
/* switched from flag unset to set */
if (mcast_flags & BATADV_MCAST_WANT_ALL_UNSNOOPABLES &&
!(orig->mcast_flags & BATADV_MCAST_WANT_ALL_UNSNOOPABLES)) {
atomic_inc(&bat_priv->mcast.num_want_all_unsnoopables);
spin_lock_bh(&bat_priv->mcast.want_lists_lock);
/* flag checks above + mcast_handler_lock prevents this */
WARN_ON(!hlist_unhashed(node));
hlist_add_head_rcu(node, head);
spin_unlock_bh(&bat_priv->mcast.want_lists_lock);
/* switched from flag set to unset */
} else if (!(mcast_flags & BATADV_MCAST_WANT_ALL_UNSNOOPABLES) &&
orig->mcast_flags & BATADV_MCAST_WANT_ALL_UNSNOOPABLES) {
atomic_dec(&bat_priv->mcast.num_want_all_unsnoopables);
spin_lock_bh(&bat_priv->mcast.want_lists_lock);
/* flag checks above + mcast_handler_lock prevents this */
WARN_ON(hlist_unhashed(node));
hlist_del_init_rcu(node);
spin_unlock_bh(&bat_priv->mcast.want_lists_lock);
}
}
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
/**
* batadv_mcast_want_ipv4_update() - update want-all-ipv4 counter and list
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node which multicast state might have changed of
* @mcast_flags: flags indicating the new multicast state
*
* If the BATADV_MCAST_WANT_ALL_IPV4 flag of this originator, orig, has
* toggled then this method updates counter and list accordingly.
*
* Caller needs to hold orig->mcast_handler_lock.
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
*/
static void batadv_mcast_want_ipv4_update(struct batadv_priv *bat_priv,
struct batadv_orig_node *orig,
u8 mcast_flags)
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
{
struct hlist_node *node = &orig->mcast_want_all_ipv4_node;
struct hlist_head *head = &bat_priv->mcast.want_all_ipv4_list;
lockdep_assert_held(&orig->mcast_handler_lock);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
/* switched from flag unset to set */
if (mcast_flags & BATADV_MCAST_WANT_ALL_IPV4 &&
!(orig->mcast_flags & BATADV_MCAST_WANT_ALL_IPV4)) {
atomic_inc(&bat_priv->mcast.num_want_all_ipv4);
spin_lock_bh(&bat_priv->mcast.want_lists_lock);
/* flag checks above + mcast_handler_lock prevents this */
WARN_ON(!hlist_unhashed(node));
hlist_add_head_rcu(node, head);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
spin_unlock_bh(&bat_priv->mcast.want_lists_lock);
/* switched from flag set to unset */
} else if (!(mcast_flags & BATADV_MCAST_WANT_ALL_IPV4) &&
orig->mcast_flags & BATADV_MCAST_WANT_ALL_IPV4) {
atomic_dec(&bat_priv->mcast.num_want_all_ipv4);
spin_lock_bh(&bat_priv->mcast.want_lists_lock);
/* flag checks above + mcast_handler_lock prevents this */
WARN_ON(hlist_unhashed(node));
hlist_del_init_rcu(node);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
spin_unlock_bh(&bat_priv->mcast.want_lists_lock);
}
}
/**
* batadv_mcast_want_ipv6_update() - update want-all-ipv6 counter and list
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node which multicast state might have changed of
* @mcast_flags: flags indicating the new multicast state
*
* If the BATADV_MCAST_WANT_ALL_IPV6 flag of this originator, orig, has
* toggled then this method updates counter and list accordingly.
*
* Caller needs to hold orig->mcast_handler_lock.
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
*/
static void batadv_mcast_want_ipv6_update(struct batadv_priv *bat_priv,
struct batadv_orig_node *orig,
u8 mcast_flags)
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
{
struct hlist_node *node = &orig->mcast_want_all_ipv6_node;
struct hlist_head *head = &bat_priv->mcast.want_all_ipv6_list;
lockdep_assert_held(&orig->mcast_handler_lock);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
/* switched from flag unset to set */
if (mcast_flags & BATADV_MCAST_WANT_ALL_IPV6 &&
!(orig->mcast_flags & BATADV_MCAST_WANT_ALL_IPV6)) {
atomic_inc(&bat_priv->mcast.num_want_all_ipv6);
spin_lock_bh(&bat_priv->mcast.want_lists_lock);
/* flag checks above + mcast_handler_lock prevents this */
WARN_ON(!hlist_unhashed(node));
hlist_add_head_rcu(node, head);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
spin_unlock_bh(&bat_priv->mcast.want_lists_lock);
/* switched from flag set to unset */
} else if (!(mcast_flags & BATADV_MCAST_WANT_ALL_IPV6) &&
orig->mcast_flags & BATADV_MCAST_WANT_ALL_IPV6) {
atomic_dec(&bat_priv->mcast.num_want_all_ipv6);
spin_lock_bh(&bat_priv->mcast.want_lists_lock);
/* flag checks above + mcast_handler_lock prevents this */
WARN_ON(hlist_unhashed(node));
hlist_del_init_rcu(node);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
spin_unlock_bh(&bat_priv->mcast.want_lists_lock);
}
}
/**
* batadv_mcast_tvlv_ogm_handler() - process incoming multicast tvlv container
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node of the ogm
* @flags: flags indicating the tvlv state (see batadv_tvlv_handler_flags)
* @tvlv_value: tvlv buffer containing the multicast data
* @tvlv_value_len: tvlv buffer length
*/
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
static void batadv_mcast_tvlv_ogm_handler(struct batadv_priv *bat_priv,
struct batadv_orig_node *orig,
u8 flags,
void *tvlv_value,
u16 tvlv_value_len)
{
bool orig_mcast_enabled = !(flags & BATADV_TVLV_HANDLER_OGM_CIFNOTFND);
u8 mcast_flags = BATADV_NO_FLAGS;
if (orig_mcast_enabled && tvlv_value &&
tvlv_value_len >= sizeof(mcast_flags))
mcast_flags = *(u8 *)tvlv_value;
if (!orig_mcast_enabled) {
mcast_flags |= BATADV_MCAST_WANT_ALL_IPV4;
mcast_flags |= BATADV_MCAST_WANT_ALL_IPV6;
}
spin_lock_bh(&orig->mcast_handler_lock);
if (orig_mcast_enabled &&
!test_bit(BATADV_ORIG_CAPA_HAS_MCAST, &orig->capabilities)) {
set_bit(BATADV_ORIG_CAPA_HAS_MCAST, &orig->capabilities);
} else if (!orig_mcast_enabled &&
test_bit(BATADV_ORIG_CAPA_HAS_MCAST, &orig->capabilities)) {
clear_bit(BATADV_ORIG_CAPA_HAS_MCAST, &orig->capabilities);
}
set_bit(BATADV_ORIG_CAPA_HAS_MCAST, &orig->capa_initialized);
batadv_mcast_want_unsnoop_update(bat_priv, orig, mcast_flags);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
batadv_mcast_want_ipv4_update(bat_priv, orig, mcast_flags);
batadv_mcast_want_ipv6_update(bat_priv, orig, mcast_flags);
orig->mcast_flags = mcast_flags;
spin_unlock_bh(&orig->mcast_handler_lock);
}
/**
* batadv_mcast_init() - initialize the multicast optimizations structures
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_mcast_init(struct batadv_priv *bat_priv)
{
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
batadv_tvlv_handler_register(bat_priv, batadv_mcast_tvlv_ogm_handler,
NULL, BATADV_TVLV_MCAST, 2,
BATADV_TVLV_HANDLER_OGM_CIFNOTFND);
INIT_DELAYED_WORK(&bat_priv->mcast.work, batadv_mcast_mla_update);
batadv_mcast_start_timer(bat_priv);
}
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
* batadv_mcast_flags_print_header() - print own mcast flags to debugfs table
* @bat_priv: the bat priv with all the soft interface information
* @seq: debugfs table seq_file struct
*
* Prints our own multicast flags including a more specific reason why
* they are set, that is prints the bridge and querier state too, to
* the debugfs table specified via @seq.
*/
static void batadv_mcast_flags_print_header(struct batadv_priv *bat_priv,
struct seq_file *seq)
{
u8 flags = bat_priv->mcast.flags;
char querier4, querier6, shadowing4, shadowing6;
bool bridged = bat_priv->mcast.bridged;
if (bridged) {
querier4 = bat_priv->mcast.querier_ipv4.exists ? '.' : '4';
querier6 = bat_priv->mcast.querier_ipv6.exists ? '.' : '6';
shadowing4 = bat_priv->mcast.querier_ipv4.shadowing ? '4' : '.';
shadowing6 = bat_priv->mcast.querier_ipv6.shadowing ? '6' : '.';
} else {
querier4 = '?';
querier6 = '?';
shadowing4 = '?';
shadowing6 = '?';
}
seq_printf(seq, "Multicast flags (own flags: [%c%c%c])\n",
(flags & BATADV_MCAST_WANT_ALL_UNSNOOPABLES) ? 'U' : '.',
(flags & BATADV_MCAST_WANT_ALL_IPV4) ? '4' : '.',
(flags & BATADV_MCAST_WANT_ALL_IPV6) ? '6' : '.');
seq_printf(seq, "* Bridged [U]\t\t\t\t%c\n", bridged ? 'U' : '.');
seq_printf(seq, "* No IGMP/MLD Querier [4/6]:\t\t%c/%c\n",
querier4, querier6);
seq_printf(seq, "* Shadowing IGMP/MLD Querier [4/6]:\t%c/%c\n",
shadowing4, shadowing6);
seq_puts(seq, "-------------------------------------------\n");
seq_printf(seq, " %-10s %s\n", "Originator", "Flags");
}
/**
* batadv_mcast_flags_seq_print_text() - print the mcast flags of other nodes
* @seq: seq file to print on
* @offset: not used
*
* This prints a table of (primary) originators and their according
* multicast flags, including (in the header) our own.
*
* Return: always 0
*/
int batadv_mcast_flags_seq_print_text(struct seq_file *seq, void *offset)
{
struct net_device *net_dev = (struct net_device *)seq->private;
struct batadv_priv *bat_priv = netdev_priv(net_dev);
struct batadv_hard_iface *primary_if;
struct batadv_hashtable *hash = bat_priv->orig_hash;
struct batadv_orig_node *orig_node;
struct hlist_head *head;
u8 flags;
u32 i;
primary_if = batadv_seq_print_text_primary_if_get(seq);
if (!primary_if)
return 0;
batadv_mcast_flags_print_header(bat_priv, seq);
for (i = 0; i < hash->size; i++) {
head = &hash->table[i];
rcu_read_lock();
hlist_for_each_entry_rcu(orig_node, head, hash_entry) {
if (!test_bit(BATADV_ORIG_CAPA_HAS_MCAST,
&orig_node->capa_initialized))
continue;
if (!test_bit(BATADV_ORIG_CAPA_HAS_MCAST,
&orig_node->capabilities)) {
seq_printf(seq, "%pM -\n", orig_node->orig);
continue;
}
flags = orig_node->mcast_flags;
seq_printf(seq, "%pM [%c%c%c]\n", orig_node->orig,
(flags & BATADV_MCAST_WANT_ALL_UNSNOOPABLES)
? 'U' : '.',
(flags & BATADV_MCAST_WANT_ALL_IPV4)
? '4' : '.',
(flags & BATADV_MCAST_WANT_ALL_IPV6)
? '6' : '.');
}
rcu_read_unlock();
}
batadv_hardif_put(primary_if);
return 0;
}
#endif
/**
* batadv_mcast_mesh_info_put() - put multicast info into a netlink message
* @msg: buffer for the message
* @bat_priv: the bat priv with all the soft interface information
*
* Return: 0 or error code.
*/
int batadv_mcast_mesh_info_put(struct sk_buff *msg,
struct batadv_priv *bat_priv)
{
u32 flags = bat_priv->mcast.flags;
u32 flags_priv = BATADV_NO_FLAGS;
if (bat_priv->mcast.bridged) {
flags_priv |= BATADV_MCAST_FLAGS_BRIDGED;
if (bat_priv->mcast.querier_ipv4.exists)
flags_priv |= BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS;
if (bat_priv->mcast.querier_ipv6.exists)
flags_priv |= BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS;
if (bat_priv->mcast.querier_ipv4.shadowing)
flags_priv |= BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING;
if (bat_priv->mcast.querier_ipv6.shadowing)
flags_priv |= BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING;
}
if (nla_put_u32(msg, BATADV_ATTR_MCAST_FLAGS, flags) ||
nla_put_u32(msg, BATADV_ATTR_MCAST_FLAGS_PRIV, flags_priv))
return -EMSGSIZE;
return 0;
}
/**
* batadv_mcast_flags_dump_entry() - dump one entry of the multicast flags table
* to a netlink socket
* @msg: buffer for the message
* @portid: netlink port
* @seq: Sequence number of netlink message
* @orig_node: originator to dump the multicast flags of
*
* Return: 0 or error code.
*/
static int
batadv_mcast_flags_dump_entry(struct sk_buff *msg, u32 portid, u32 seq,
struct batadv_orig_node *orig_node)
{
void *hdr;
hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family,
NLM_F_MULTI, BATADV_CMD_GET_MCAST_FLAGS);
if (!hdr)
return -ENOBUFS;
if (nla_put(msg, BATADV_ATTR_ORIG_ADDRESS, ETH_ALEN,
orig_node->orig)) {
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
if (test_bit(BATADV_ORIG_CAPA_HAS_MCAST,
&orig_node->capabilities)) {
if (nla_put_u32(msg, BATADV_ATTR_MCAST_FLAGS,
orig_node->mcast_flags)) {
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
}
genlmsg_end(msg, hdr);
return 0;
}
/**
* batadv_mcast_flags_dump_bucket() - dump one bucket of the multicast flags
* table to a netlink socket
* @msg: buffer for the message
* @portid: netlink port
* @seq: Sequence number of netlink message
* @head: bucket to dump
* @idx_skip: How many entries to skip
*
* Return: 0 or error code.
*/
static int
batadv_mcast_flags_dump_bucket(struct sk_buff *msg, u32 portid, u32 seq,
struct hlist_head *head, long *idx_skip)
{
struct batadv_orig_node *orig_node;
long idx = 0;
rcu_read_lock();
hlist_for_each_entry_rcu(orig_node, head, hash_entry) {
if (!test_bit(BATADV_ORIG_CAPA_HAS_MCAST,
&orig_node->capa_initialized))
continue;
if (idx < *idx_skip)
goto skip;
if (batadv_mcast_flags_dump_entry(msg, portid, seq,
orig_node)) {
rcu_read_unlock();
*idx_skip = idx;
return -EMSGSIZE;
}
skip:
idx++;
}
rcu_read_unlock();
return 0;
}
/**
* __batadv_mcast_flags_dump() - dump multicast flags table to a netlink socket
* @msg: buffer for the message
* @portid: netlink port
* @seq: Sequence number of netlink message
* @bat_priv: the bat priv with all the soft interface information
* @bucket: current bucket to dump
* @idx: index in current bucket to the next entry to dump
*
* Return: 0 or error code.
*/
static int
__batadv_mcast_flags_dump(struct sk_buff *msg, u32 portid, u32 seq,
struct batadv_priv *bat_priv, long *bucket, long *idx)
{
struct batadv_hashtable *hash = bat_priv->orig_hash;
long bucket_tmp = *bucket;
struct hlist_head *head;
long idx_tmp = *idx;
while (bucket_tmp < hash->size) {
head = &hash->table[bucket_tmp];
if (batadv_mcast_flags_dump_bucket(msg, portid, seq, head,
&idx_tmp))
break;
bucket_tmp++;
idx_tmp = 0;
}
*bucket = bucket_tmp;
*idx = idx_tmp;
return msg->len;
}
/**
* batadv_mcast_netlink_get_primary() - get primary interface from netlink
* callback
* @cb: netlink callback structure
* @primary_if: the primary interface pointer to return the result in
*
* Return: 0 or error code.
*/
static int
batadv_mcast_netlink_get_primary(struct netlink_callback *cb,
struct batadv_hard_iface **primary_if)
{
struct batadv_hard_iface *hard_iface = NULL;
struct net *net = sock_net(cb->skb->sk);
struct net_device *soft_iface;
struct batadv_priv *bat_priv;
int ifindex;
int ret = 0;
ifindex = batadv_netlink_get_ifindex(cb->nlh, BATADV_ATTR_MESH_IFINDEX);
if (!ifindex)
return -EINVAL;
soft_iface = dev_get_by_index(net, ifindex);
if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
ret = -ENODEV;
goto out;
}
bat_priv = netdev_priv(soft_iface);
hard_iface = batadv_primary_if_get_selected(bat_priv);
if (!hard_iface || hard_iface->if_status != BATADV_IF_ACTIVE) {
ret = -ENOENT;
goto out;
}
out:
if (soft_iface)
dev_put(soft_iface);
if (!ret && primary_if)
*primary_if = hard_iface;
else if (hard_iface)
batadv_hardif_put(hard_iface);
return ret;
}
/**
* batadv_mcast_flags_dump() - dump multicast flags table to a netlink socket
* @msg: buffer for the message
* @cb: callback structure containing arguments
*
* Return: message length.
*/
int batadv_mcast_flags_dump(struct sk_buff *msg, struct netlink_callback *cb)
{
struct batadv_hard_iface *primary_if = NULL;
int portid = NETLINK_CB(cb->skb).portid;
struct batadv_priv *bat_priv;
long *bucket = &cb->args[0];
long *idx = &cb->args[1];
int ret;
ret = batadv_mcast_netlink_get_primary(cb, &primary_if);
if (ret)
return ret;
bat_priv = netdev_priv(primary_if->soft_iface);
ret = __batadv_mcast_flags_dump(msg, portid, cb->nlh->nlmsg_seq,
bat_priv, bucket, idx);
batadv_hardif_put(primary_if);
return ret;
}
/**
* batadv_mcast_free() - free the multicast optimizations structures
* @bat_priv: the bat priv with all the soft interface information
*/
void batadv_mcast_free(struct batadv_priv *bat_priv)
{
cancel_delayed_work_sync(&bat_priv->mcast.work);
batman-adv: Always flood IGMP/MLD reports With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-11 00:41:24 +08:00
batadv_tvlv_container_unregister(bat_priv, BATADV_TVLV_MCAST, 2);
batadv_tvlv_handler_unregister(bat_priv, BATADV_TVLV_MCAST, 2);
/* safely calling outside of worker, as worker was canceled above */
batadv_mcast_mla_tt_retract(bat_priv, NULL);
}
/**
* batadv_mcast_purge_orig() - reset originator global mcast state modifications
* @orig: the originator which is going to get purged
*/
void batadv_mcast_purge_orig(struct batadv_orig_node *orig)
{
struct batadv_priv *bat_priv = orig->bat_priv;
spin_lock_bh(&orig->mcast_handler_lock);
batadv_mcast_want_unsnoop_update(bat_priv, orig, BATADV_NO_FLAGS);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
batadv_mcast_want_ipv4_update(bat_priv, orig, BATADV_NO_FLAGS);
batadv_mcast_want_ipv6_update(bat_priv, orig, BATADV_NO_FLAGS);
spin_unlock_bh(&orig->mcast_handler_lock);
}