2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
linux-next/include/linux/mlx4/cmd.h

334 lines
9.8 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef MLX4_CMD_H
#define MLX4_CMD_H
#include <linux/dma-mapping.h>
#include <linux/if_link.h>
#include <linux/mlx4/device.h>
#include <linux/netdevice.h>
enum {
/* initialization and general commands */
MLX4_CMD_SYS_EN = 0x1,
MLX4_CMD_SYS_DIS = 0x2,
MLX4_CMD_MAP_FA = 0xfff,
MLX4_CMD_UNMAP_FA = 0xffe,
MLX4_CMD_RUN_FW = 0xff6,
MLX4_CMD_MOD_STAT_CFG = 0x34,
MLX4_CMD_QUERY_DEV_CAP = 0x3,
MLX4_CMD_QUERY_FW = 0x4,
MLX4_CMD_ENABLE_LAM = 0xff8,
MLX4_CMD_DISABLE_LAM = 0xff7,
MLX4_CMD_QUERY_DDR = 0x5,
MLX4_CMD_QUERY_ADAPTER = 0x6,
MLX4_CMD_INIT_HCA = 0x7,
MLX4_CMD_CLOSE_HCA = 0x8,
MLX4_CMD_INIT_PORT = 0x9,
MLX4_CMD_CLOSE_PORT = 0xa,
MLX4_CMD_QUERY_HCA = 0xb,
MLX4_CMD_QUERY_PORT = 0x43,
MLX4_CMD_SENSE_PORT = 0x4d,
MLX4_CMD_HW_HEALTH_CHECK = 0x50,
MLX4_CMD_SET_PORT = 0xc,
MLX4_CMD_SET_NODE = 0x5a,
MLX4_CMD_QUERY_FUNC = 0x56,
MLX4_CMD_ACCESS_DDR = 0x2e,
MLX4_CMD_MAP_ICM = 0xffa,
MLX4_CMD_UNMAP_ICM = 0xff9,
MLX4_CMD_MAP_ICM_AUX = 0xffc,
MLX4_CMD_UNMAP_ICM_AUX = 0xffb,
MLX4_CMD_SET_ICM_SIZE = 0xffd,
MLX4_CMD_ACCESS_REG = 0x3b,
MLX4_CMD_ALLOCATE_VPP = 0x80,
MLX4_CMD_SET_VPORT_QOS = 0x81,
/*master notify fw on finish for slave's flr*/
MLX4_CMD_INFORM_FLR_DONE = 0x5b,
MLX4_CMD_VIRT_PORT_MAP = 0x5c,
MLX4_CMD_GET_OP_REQ = 0x59,
/* TPT commands */
MLX4_CMD_SW2HW_MPT = 0xd,
MLX4_CMD_QUERY_MPT = 0xe,
MLX4_CMD_HW2SW_MPT = 0xf,
MLX4_CMD_READ_MTT = 0x10,
MLX4_CMD_WRITE_MTT = 0x11,
MLX4_CMD_SYNC_TPT = 0x2f,
/* EQ commands */
MLX4_CMD_MAP_EQ = 0x12,
MLX4_CMD_SW2HW_EQ = 0x13,
MLX4_CMD_HW2SW_EQ = 0x14,
MLX4_CMD_QUERY_EQ = 0x15,
/* CQ commands */
MLX4_CMD_SW2HW_CQ = 0x16,
MLX4_CMD_HW2SW_CQ = 0x17,
MLX4_CMD_QUERY_CQ = 0x18,
MLX4_CMD_MODIFY_CQ = 0x2c,
/* SRQ commands */
MLX4_CMD_SW2HW_SRQ = 0x35,
MLX4_CMD_HW2SW_SRQ = 0x36,
MLX4_CMD_QUERY_SRQ = 0x37,
MLX4_CMD_ARM_SRQ = 0x40,
/* QP/EE commands */
MLX4_CMD_RST2INIT_QP = 0x19,
MLX4_CMD_INIT2RTR_QP = 0x1a,
MLX4_CMD_RTR2RTS_QP = 0x1b,
MLX4_CMD_RTS2RTS_QP = 0x1c,
MLX4_CMD_SQERR2RTS_QP = 0x1d,
MLX4_CMD_2ERR_QP = 0x1e,
MLX4_CMD_RTS2SQD_QP = 0x1f,
MLX4_CMD_SQD2SQD_QP = 0x38,
MLX4_CMD_SQD2RTS_QP = 0x20,
MLX4_CMD_2RST_QP = 0x21,
MLX4_CMD_QUERY_QP = 0x22,
MLX4_CMD_INIT2INIT_QP = 0x2d,
MLX4_CMD_SUSPEND_QP = 0x32,
MLX4_CMD_UNSUSPEND_QP = 0x33,
MLX4_CMD_UPDATE_QP = 0x61,
/* special QP and management commands */
MLX4_CMD_CONF_SPECIAL_QP = 0x23,
MLX4_CMD_MAD_IFC = 0x24,
MLX4_CMD_MAD_DEMUX = 0x203,
/* multicast commands */
MLX4_CMD_READ_MCG = 0x25,
MLX4_CMD_WRITE_MCG = 0x26,
MLX4_CMD_MGID_HASH = 0x27,
/* miscellaneous commands */
MLX4_CMD_DIAG_RPRT = 0x30,
MLX4_CMD_NOP = 0x31,
MLX4_CMD_CONFIG_DEV = 0x3a,
MLX4_CMD_ACCESS_MEM = 0x2e,
MLX4_CMD_SET_VEP = 0x52,
/* Ethernet specific commands */
MLX4_CMD_SET_VLAN_FLTR = 0x47,
MLX4_CMD_SET_MCAST_FLTR = 0x48,
MLX4_CMD_DUMP_ETH_STATS = 0x49,
/* Communication channel commands */
MLX4_CMD_ARM_COMM_CHANNEL = 0x57,
MLX4_CMD_GEN_EQE = 0x58,
/* virtual commands */
MLX4_CMD_ALLOC_RES = 0xf00,
MLX4_CMD_FREE_RES = 0xf01,
MLX4_CMD_MCAST_ATTACH = 0xf05,
MLX4_CMD_UCAST_ATTACH = 0xf06,
MLX4_CMD_PROMISC = 0xf08,
MLX4_CMD_QUERY_FUNC_CAP = 0xf0a,
MLX4_CMD_QP_ATTACH = 0xf0b,
/* debug commands */
MLX4_CMD_QUERY_DEBUG_MSG = 0x2a,
MLX4_CMD_SET_DEBUG_MSG = 0x2b,
/* statistics commands */
MLX4_CMD_QUERY_IF_STAT = 0X54,
MLX4_CMD_SET_IF_STAT = 0X55,
/* register/delete flow steering network rules */
MLX4_QP_FLOW_STEERING_ATTACH = 0x65,
MLX4_QP_FLOW_STEERING_DETACH = 0x66,
MLX4_FLOW_STEERING_IB_UC_QP_RANGE = 0x64,
/* Update and read QCN parameters */
MLX4_CMD_CONGESTION_CTRL_OPCODE = 0x68,
};
enum {
MLX4_CMD_TIME_CLASS_A = 60000,
MLX4_CMD_TIME_CLASS_B = 60000,
MLX4_CMD_TIME_CLASS_C = 60000,
};
enum {
/* virtual to physical port mapping opcode modifiers */
MLX4_GET_PORT_VIRT2PHY = 0x0,
MLX4_SET_PORT_VIRT2PHY = 0x1,
};
enum {
MLX4_MAILBOX_SIZE = 4096,
MLX4_ACCESS_MEM_ALIGN = 256,
};
enum {
/* Set port opcode modifiers */
MLX4_SET_PORT_IB_OPCODE = 0x0,
MLX4_SET_PORT_ETH_OPCODE = 0x1,
MLX4_SET_PORT_BEACON_OPCODE = 0x4,
};
enum {
/* Set port Ethernet input modifiers */
MLX4_SET_PORT_GENERAL = 0x0,
MLX4_SET_PORT_RQP_CALC = 0x1,
MLX4_SET_PORT_MAC_TABLE = 0x2,
MLX4_SET_PORT_VLAN_TABLE = 0x3,
MLX4_SET_PORT_PRIO_MAP = 0x4,
MLX4_SET_PORT_GID_TABLE = 0x5,
MLX4_SET_PORT_PRIO2TC = 0x8,
MLX4_SET_PORT_SCHEDULER = 0x9,
MLX4_SET_PORT_VXLAN = 0xB,
MLX4_SET_PORT_ROCE_ADDR = 0xD
};
enum {
MLX4_CMD_MAD_DEMUX_CONFIG = 0,
MLX4_CMD_MAD_DEMUX_QUERY_STATE = 1,
MLX4_CMD_MAD_DEMUX_QUERY_RESTR = 2, /* Query mad demux restrictions */
};
enum {
MLX4_CMD_WRAPPED,
MLX4_CMD_NATIVE
};
/*
* MLX4_RX_CSUM_MODE_VAL_NON_TCP_UDP -
* Receive checksum value is reported in CQE also for non TCP/UDP packets.
*
* MLX4_RX_CSUM_MODE_L4 -
* L4_CSUM bit in CQE, which indicates whether or not L4 checksum
* was validated correctly, is supported.
*
* MLX4_RX_CSUM_MODE_IP_OK_IP_NON_TCP_UDP -
* IP_OK CQE's field is supported also for non TCP/UDP IP packets.
*
* MLX4_RX_CSUM_MODE_MULTI_VLAN -
* Receive Checksum offload is supported for packets with more than 2 vlan headers.
*/
enum mlx4_rx_csum_mode {
MLX4_RX_CSUM_MODE_VAL_NON_TCP_UDP = 1UL << 0,
MLX4_RX_CSUM_MODE_L4 = 1UL << 1,
MLX4_RX_CSUM_MODE_IP_OK_IP_NON_TCP_UDP = 1UL << 2,
MLX4_RX_CSUM_MODE_MULTI_VLAN = 1UL << 3
};
struct mlx4_config_dev_params {
u16 vxlan_udp_dport;
u8 rx_csum_flags_port_1;
u8 rx_csum_flags_port_2;
};
enum mlx4_en_congestion_control_algorithm {
MLX4_CTRL_ALGO_802_1_QAU_REACTION_POINT = 0,
};
enum mlx4_en_congestion_control_opmod {
MLX4_CONGESTION_CONTROL_GET_PARAMS,
MLX4_CONGESTION_CONTROL_GET_STATISTICS,
MLX4_CONGESTION_CONTROL_SET_PARAMS = 4,
};
struct mlx4_dev;
struct mlx4_cmd_mailbox {
void *buf;
dma_addr_t dma;
};
int __mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
int out_is_imm, u32 in_modifier, u8 op_modifier,
u16 op, unsigned long timeout, int native);
/* Invoke a command with no output parameter */
static inline int mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u32 in_modifier,
u8 op_modifier, u16 op, unsigned long timeout,
int native)
{
return __mlx4_cmd(dev, in_param, NULL, 0, in_modifier,
op_modifier, op, timeout, native);
}
/* Invoke a command with an output mailbox */
static inline int mlx4_cmd_box(struct mlx4_dev *dev, u64 in_param, u64 out_param,
u32 in_modifier, u8 op_modifier, u16 op,
unsigned long timeout, int native)
{
return __mlx4_cmd(dev, in_param, &out_param, 0, in_modifier,
op_modifier, op, timeout, native);
}
/*
* Invoke a command with an immediate output parameter (and copy the
* output into the caller's out_param pointer after the command
* executes).
*/
static inline int mlx4_cmd_imm(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
u32 in_modifier, u8 op_modifier, u16 op,
unsigned long timeout, int native)
{
return __mlx4_cmd(dev, in_param, out_param, 1, in_modifier,
op_modifier, op, timeout, native);
}
struct mlx4_cmd_mailbox *mlx4_alloc_cmd_mailbox(struct mlx4_dev *dev);
void mlx4_free_cmd_mailbox(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox);
int mlx4_get_counter_stats(struct mlx4_dev *dev, int counter_index,
struct mlx4_counter *counter_stats, int reset);
int mlx4_get_vf_stats(struct mlx4_dev *dev, int port, int vf_idx,
struct ifla_vf_stats *vf_stats);
u32 mlx4_comm_get_version(void);
int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u64 mac);
int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan, u8 qos);
int mlx4_set_vf_rate(struct mlx4_dev *dev, int port, int vf, int min_tx_rate,
int max_tx_rate);
int mlx4_set_vf_spoofchk(struct mlx4_dev *dev, int port, int vf, bool setting);
int mlx4_get_vf_config(struct mlx4_dev *dev, int port, int vf, struct ifla_vf_info *ivf);
int mlx4_set_vf_link_state(struct mlx4_dev *dev, int port, int vf, int link_state);
int mlx4_config_dev_retrieval(struct mlx4_dev *dev,
struct mlx4_config_dev_params *params);
void mlx4_cmd_wake_completions(struct mlx4_dev *dev);
void mlx4_report_internal_err_comm_event(struct mlx4_dev *dev);
/*
* mlx4_get_slave_default_vlan -
* return true if VST ( default vlan)
* if VST, will return vlan & qos (if not NULL)
*/
bool mlx4_get_slave_default_vlan(struct mlx4_dev *dev, int port, int slave,
u16 *vlan, u8 *qos);
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
#define MLX4_COMM_GET_IF_REV(cmd_chan_ver) (u8)((cmd_chan_ver) >> 8)
#define COMM_CHAN_EVENT_INTERNAL_ERR (1 << 17)
mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 12:18:30 +08:00
#endif /* MLX4_CMD_H */