renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Code
752ade68cb
linux-next/drivers/staging/Makefile

47 lines
1.6 KiB
Makefile
Raw Normal View History

Staging: add Kconfig entries and Makefile infrastructure This hooks up the drivers/staging directory to the build system Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-25 05:46:44 +08:00
# Makefile for staging directory
staging: Move media drivers to staging/media In practice, it is being hard to distinguish when a patch should go to staging tree or to the media tree. Better to distinguish it, by putting the media drivers at a separate staging directory. Newer staging drivers that include anything with "dvb*.h", "v4l2*.h" or "videodev2.h" should go to the drivers/staging/media tree. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-02 08:23:55 +08:00
obj-y += media/
staging: typec: USB Type-C Port Manager (tcpm) This driver implements the USB Type-C Power Delivery state machine for both source and sink ports. Alternate mode support is not fully implemented. The driver attaches to the USB Type-C class code implemented in the following patches. usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY usb: USB Type-C connector class This driver only implements the state machine. Lower level drivers are responsible for - Reporting VBUS status and activating VBUS - Setting CC lines and providing CC line status - Setting line polarity - Activating and deactivating VCONN - Setting the current limit - Activating and deactivating PD message transfers - Sending and receiving PD messages The driver provides both a functional API as well as callbacks for lower level drivers. Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-28 05:09:56 +08:00
obj-y += typec/
Staging: add wlan-ng prism2 usb driver This adds the wlan-ng prism2 USB driver to the drivers/staging tree. The code was originally written by the linux-wlan-ng team, patched by some Novell engineers to properly work on newer kernels, and then hacked into place in order to get it to build properly in a single subdirectory within the kernel tree by me. It supports a wide range of older USB prism2 devices, and contains a 80211 stack to support this single driver. Cc: Christian Zoz <zoz@suse.de> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: linux-wireless <linux-wireless@vger.kernel.org> Cc: John Linville <linville@tuxdriver.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: linux-wlan-ng <solomon@linux-wlan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-03 02:29:28 +08:00
obj-$(CONFIG_PRISM2_USB) += wlan-ng/
Staging: add comedi core This adds the Comedi core to the staging tree. This is a data acquision infrastructure for Linux, providing a common interface for these types of drivers. Taken directly from the comedi git tree, with only minor tweaks by Greg to get it to build properly within the kernel tree. From: David Schleef <ds@schleef.org> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Shawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-05 12:29:31 +08:00
obj-$(CONFIG_COMEDI) += comedi/
Revert "Staging: olpc_dcon: Remove obsolete driver" This reverts commit 82ef33af9dd30075adbd9f3dd161b606b8ba88ac. It turns out these machines are still out there, and the original patch broke them. So revert it, adding back the driver, so people's machines still work properly. Reported-by: James Cameron <quozl@laptop.org> Cc: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-05 04:52:35 +08:00
obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon/
Staging: rtl8192u: make it compile Add it to staging Kbuild and fixes some API differences that prevents compilation. It seems that the ieee80211 stack is very close to rtl8192su one. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-03 17:17:24 +08:00
obj-$(CONFIG_RTL8192U) += rtl8192u/
Staging: add Realtek 8192 PCI wireless driver This wireless driver should work for the Realtek 8192 PCI devices. It comes directly from Realtek and has been tested to work on at least one laptop in the wild. Cc: Anthony Wong <awong1@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-05 06:57:55 +08:00
obj-$(CONFIG_RTL8192E) += rtl8192e/
staging: Add rtl8723bs sdio wifi driver The rtl8723bs is found on quite a few systems used by Linux users, such as on Atom systems (Intel Computestick and various other Atom based devices) and on many (budget) ARM boards such as the CHIP. The plan moving forward with this is for the new clean, written from scratch, rtl8xxxu driver to eventually gain support for sdio devices. But there is no clear timeline for that, so lets add this driver included in staging for now. Cc: Bastien Nocera <hadess@hadess.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Jes Sorensen <jes.sorensen@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30 01:47:51 +08:00
obj-$(CONFIG_RTL8723BS) += rtl8723bs/
staging: r8712u: Add the new driver to the mainline kernel This code is for a completely new version of the Realtek 8192 USB devices such as the D-Link DWA-130. The Realtek code, which was originally for Linux, Windows XP and Windows CE, has been stripped of all code not needed for Linux. In addition, only one additional configuration variable, which enables AP mode, remains. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com> Tested-by: Frederic Leroy <fredo@starox.org>
2010-08-20 23:15:30 +08:00
obj-$(CONFIG_R8712U) += rtl8712/
staging: r8188eu: Turn on build of new driver This commit modifies drivers/staging/Makefile, and adds the drivers/staging/rtl8188eu/Makefile. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22 11:34:15 +08:00
obj-$(CONFIG_R8188EU) += rtl8188eu/
staging: rts5208: add support for rts5208 and rts5288 There are still many rts5208/5288 card readers being used, but no drivers are supported them in kernel now. This driver can make a great convenience for people who use them. Many other rts-series card reader are supported by mfd driver, but due to much difference with others, rts5208/5288 can not add into mfd driver pretty now, so we provide a separated driver here to support the device. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-12 17:16:08 +08:00
obj-$(CONFIG_RTS5208) += rts5208/
Staging: Netlogic XLR/XLS GMAC driver Add support for the Network Accelerator Engine on Netlogic XLR/XLS MIPS SoCs. The XLR/XLS NAE blocks can be configured as one 10G interface or four 1G interfaces. This driver supports blocks with 1G ports. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-06 22:12:22 +08:00
obj-$(CONFIG_NETLOGIC_XLR_NET) += netlogic/
Staging: Add octeon-ethernet driver files. The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui ports present on the Cavium OCTEON family of SOCs. These SOCs are multi-core mips64 processors with existing support over in arch/mips. The driver files can be categorized into three basic groups: 1) Register definitions, these are named cvmx-*-defs.h 2) Main driver code, these have names that don't start cvmx-. 3) Interface specific functions and other utility code, names starting with cvmx- Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-06 08:35:21 +08:00
obj-$(CONFIG_OCTEON_ETHERNET) += octeon/
staging: MIPS: add Octeon USB HCD support Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB mass storage. The driver has been extracted from GPL sources of EdgeRouter Lite firmware (based on Linux 2.6.32.13). Some minor fixes and cleanups have been done to make it work with 3.10-rc3. $ uname -a Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc #41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux $ modprobe octeon-usb [ 37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned. [ 37.983649] OcteonUSB: Detected 1 ports [ 37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller [ 38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1 [ 38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000 [ 38.019970] hub 1-0:1.0: USB hub found [ 38.023851] hub 1-0:1.0: 1 port detected [ 38.028101] OcteonUSB: Registered HCD for port 0 on irq 122 [ 38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB [ 38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected [ 38.597375] scsi0 : usb-storage 1-1:1.0 [ 39.604111] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4 [ 39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB) [ 39.630696] sd 0:0:0:0: [sda] Write Protect is off [ 39.635945] sd 0:0:0:0: [sda] No Caching mode page present [ 39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.651341] sd 0:0:0:0: [sda] No Caching mode page present [ 39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.664296] sda: sda1 sda2 [ 39.675574] sd 0:0:0:0: [sda] No Caching mode page present [ 39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-02 02:42:58 +08:00
obj-$(CONFIG_OCTEON_USB) += octeon-usb/
Staging: vt6655: Integrate drivers/staging/vt6655 into build system. Integrate drivers/staging/vt6655 into build system. Signed-off-by: Forest Bond <forest@alittletooquiet.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-03 02:44:46 +08:00
obj-$(CONFIG_VT6655) += vt6655/
Staging: vt6656: Integrate vt6656 into build system. Integrate drivers/staging/vt6656 into build system. Signed-off-by: Forest Bond <forest@alittletooquiet.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-13 19:39:00 +08:00
obj-$(CONFIG_VT6656) += vt6656/
Staging: vme: change to VME_BUS Turns out the m68k arch already has a CONFIG_VME, so use CONFIG_VME_BUS instead. Thanks to Geet Uytterhoeven for pointing this out. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-12 00:51:31 +08:00
obj-$(CONFIG_VME_BUS) += vme/
Staging: IIO: core support for device registration and management Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-19 01:06:19 +08:00
obj-$(CONFIG_IIO) += iio/
staging: sm750: Fix the Makefile option error The sm750fb's Kconfig option is CONFIG_FB_SM750, not CONFIG_FB_SM7XX. Thus fix it to make the sm750fb can be built successfully. Signed-off-by: Binbin Zhou <zhoubb@lemote.com> Reviewed-by: Huacai Chen <chenhc@@lemote.com> Acked-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-22 11:37:26 +08:00
obj-$(CONFIG_FB_SM750) += sm750fb/
staging: Add framebuffer driver for XGI chipsets This driver handles XG20, XG21, XG40, XG42 chipsets from XGI. They're also known as Z7,Z9,Z11 chipsets. It's based on the SiS fb driver but has been heavily modified by XGI to support their newer chipsets. Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-19 16:44:14 +08:00
obj-$(CONFIG_FB_XGI) += xgifb/
staging: emxx_udc: Add Emma Mobile USB Gadget driver Add the emxx_udc driver to staging based on an old linux-2.6.35.7 android tree. The driver has been brushed up slightly to complile but it is still in great need of cleanup. At this point DT bindings are clearly lacking and I doubt that the driver even can run with multiple instances (global variables, hurray!). Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-06 18:44:17 +08:00
obj-$(CONFIG_USB_EMXX) += emxx_udc/
staging: gma500: Intel GMA500 staging driver This is an initial staging driver for the GMA500. It's been stripped out of the PVR drivers and crunched together from various bits of code and different kernels. Currently it's unaccelerated but still pretty snappy even compositing with the frame buffer X server. Lots of work is needed to rework the ttm and bo interfaces from being ripped out and then 2D acceleration wants putting back for framebuffer and somehow eventually via DRM. There is no support for the parts without open source userspace (video accelerators, 3D) as per kernel policy. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 22:27:58 +08:00
obj-$(CONFIG_SPEAKUP) += speakup/
Staging: initial version of the nvec driver This is an implementation of a NVidia compliant embedded controller protocol driver. It is used on some ARM-Tegra boards for device communication. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-19 22:34:42 +08:00
obj-$(CONFIG_MFD_NVEC) += nvec/
Staging: android: add the code back to the build It builds, so ship it! Cc: Arve Hjønnevåg <arve@android.com> Cc: Brian Swetland <swetland@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-30 19:33:10 +08:00
obj-$(CONFIG_ANDROID) += android/
staging: board: Initial board staging support Add staging board base support to allow continuous upstream in-tree development and integration of platform devices. Helps developers integrate devices as platform devices for device drivers that only provide platform device bindings. This in turn allows for incremental development of both hardware feature support and DT binding work in parallel. Two separate pieces of board staging functionality is provided to ease per-board staging board support: - The board_staging() macro allows easy per-board callbacks - The board_staging_dt_node_available() provides DT node checking Tested on the KZM9D board with the emxx_udc staging driver. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-06 18:44:43 +08:00
obj-$(CONFIG_STAGING_BOARD) += board/
staging: gdm7240: adding LTE USB driver GCT Semiconductor GDM7240 is 4G LTE chip. This driver supports GCT reference platform as a USB device. Signed-off-by: Won Kang <wonkang@gctsemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25 02:36:17 +08:00
obj-$(CONFIG_LTE_GDM724X) += gdm724x/
staging: fwserial: Add TTY-over-Firewire serial driver This patch provides the kernel driver for high-speed TTY communication over the IEEE 1394 bus. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-02 20:16:33 +08:00
obj-$(CONFIG_FIREWIRE_SERIAL) += fwserial/
goldfish: audio support (remove change to another file that escaped into the patch set) From: Mike Lockwood <lockwood@google.com> Provide a simple audio channel between the kernel and the emulator that host sit. Queued for staging right now as this ought to be an ALSA driver not just a dumb device of its own making. Signed-off-by: Mike A. Chan <mikechan@google.com> [x86 support] Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Bruce Beare <bruce.j.beare@intel.com> [Clean up] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-23 22:13:52 +08:00
obj-$(CONFIG_GOLDFISH) += goldfish/
staging: lustre: make lustre dependent on LNet In the case of lustre routers you only need a functioning LNet stack. Especially since often the routers are very light weight and want to avoid any addition software that would create additional pressures on the system. Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-09 06:35:29 +08:00
obj-$(CONFIG_LNET) += lustre/
staging: dgnc: add driver to kernel build This patch adds the dgnc driver to the kernel build process. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21 08:56:58 +08:00
obj-$(CONFIG_DGNC) += dgnc/
Staging: MTD: Micron SPINAND Driver support This patch adds support for Micron SPINAND via MTD. Signed-off-by: Mona Anonuevo <manonuevo@micron.com> Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-01 17:33:58 +08:00
obj-$(CONFIG_MTD_SPINAND_MT29F) += mt29f_spinand/
staging: fpgaboot: Xilinx FPGA firmware download driver This driver downloads Xilinx FPGA firmware using gpio pins. It loads Xilinx FPGA bitstream format firmware image and program the Xilinx FPGA using SelectMAP (parallel) mode. Signed-off-by: Insop Song <insop.song@gainspeed.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-21 15:47:06 +08:00
obj-$(CONFIG_GS_FPGABOOT) += gs_fpgaboot/
staging: crypto: skein: allow building statically These are the minimum changes required to get the code to build statically in the kernel. It's necessary to do this first so that we can empirically determine that future cleanup patches aren't changing the generated object code. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-24 10:32:49 +08:00
obj-$(CONFIG_CRYPTO_SKEIN) += skein/
staging: visorutil driver to provide common functionality to other s-Par drivers The visorutil module is a support library required by all other s-Par driver modules. Among its features it abstracts reading, writing, and manipulating a block of memory. Signed-off-by: Ken Cox <jkc@redhat.com> Cc: Ben Romer <sparmaintainer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-04 21:58:05 +08:00
obj-$(CONFIG_UNISYSSPAR) += unisys/
staging: Add Xilinx Clocking Wizard driver Add a driver for the Xilinx Clocking Wizard soft IP. The clocking wizard provides an AXI interface to dynamically reconfigure the clocking resources of Xilinx FPGAs. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-03 00:13:35 +08:00
obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/
staging: fbtft: core support This commit adds the core fbtft framework from https://github.com/notro/fbtft. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Noralf Tronnes <notro@tronnes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-31 17:11:09 +08:00
obj-$(CONFIG_FB_TFT) += fbtft/
staging: fsl-mc: Freescale Management Complex (fsl-mc) bus driver Platform device driver that sets up the basic bus infrastructure for the fsl-mc bus type, including support for adding/removing fsl-mc devices, register/unregister of fsl-mc drivers, and bus match support to bind devices to drivers. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06 09:29:10 +08:00
obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
staging: fsl-dpaa2/eth: Add APIs for DPNI objects Add the command build/parse APIs for operating on DPNI objects through the DPAA2 Management Complex. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-28 17:50:28 +08:00
obj-$(CONFIG_FSL_DPAA2) += fsl-dpaa2/
staging: wilc1000: Add SDIO/SPI 802.11 driver This driver is for the wilc1000 which is a single chip IEEE 802.11 b/g/n device. The driver works together with cfg80211, which is the kernel side of configuration management for wireless devices because the wilc1000 chipset is fullmac where the MLME is managed in hardware. The driver worked from kernel version 2.6.38 and being now ported to several others since then. A TODO file is included as well in this commit. Signed-off-by: Johnny Kim <johnny.kim@atmel.com> Signed-off-by: Rachel Kim <rachel.kim@atmel.com> Signed-off-by: Dean Lee <dean.lee@atmel.com> Signed-off-by: Chris Park <chris.park@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-11 13:30:56 +08:00
obj-$(CONFIG_WILC1000) += wilc1000/
Staging: most: add MOST driver's core module This patch adds the core module of the MOST driver to the kernel's driver staging area. This module is part of the MOST driver and handles the configuration interface in sysfs, the buffer management and the data routing. MOST defines the protocol, hardware and software layers necessary to allow for the efficient and low-cost transport of control, real-time and packet data using a single medium (physical layer). Media currently in use are fiber optics, unshielded twisted pair cables (UTP) and coax cables. MOST also supports various speed grades up to 150 Mbps. For more information on MOST, visit the MOST Cooperation website: www.mostcooperation.com. Cars continue to evolve into sophisticated consumer electronics platforms, increasing the demand for reliable and simple solutions to support audio, video and data communications. MOST can be used to connect multiple consumer devices via optical or electrical physical layers directly to one another or in a network configuration. As a synchronous network, MOST provides excellent Quality of Service and seamless connectivity for audio/video streaming. Therefore, the driver perfectly fits to the mission of Automotive Grade Linux to create open source software solutions for automotive applications. The driver consists basically of three layers. The hardware layer, the core layer and the application layer. The core layer consists of the core module only. This module handles the communication flow through all three layers, the configuration of the driver, the configuration interface representation in sysfs, and the buffer management. For each of the other two layers a selection of modules is provided. These modules can arbitrarily be combined to meet the needs of the desired system architecture. A module of the hardware layer is referred to as an HDM (hardware dependent module). Each module of this layer handles exactly one of the peripheral interfaces of a network interface controller (e.g. USB, MediaLB, I2C). A module of the application layer is referred to as an AIM (application interfacing module). The modules of this layer give access to MOST via one the following ways: character devices, ALSA, Networking or V4L2. To physically access MOST, an Intelligent Network Interface Controller (INIC) is needed. For more information on available controllers visit: www.microchip.com Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-24 22:11:48 +08:00
obj-$(CONFIG_MOST) += most/
staging: ks7010: add driver from Nanonote extra-repository See the TODO for details where this driver came from. Only a few minor changes were made to make the driver suitable for staging: * updated Kconfig help text and dependencies * added TODO * removed two __DATE__ and __TIME__ printouts to allow reproducible builds * added to staging main Kconfig + Makefile Tested on a Renesas Salvator-X board with a Spectec SDW-823 card. I could connect to a WPA-protected network. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-31 18:56:13 +08:00
obj-$(CONFIG_KS7010) += ks7010/
staging: greybus: Add drivers/staging/greybus to the build This adds a proper Kconfig file for drivers/staging/greybus and fixes up the Makefile to work correctly within the kernel build system (modules depend on the .config options, etc.) Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2016-09-19 21:46:40 +08:00
obj-$(CONFIG_GREYBUS) += greybus/
staging: vc04_services: use bcm2835 consequently The naming bcm2708 is used only in the vendor kernel, so better replace it with bcm2835 which is used in mainline in order to avoid any confusion. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 02:34:21 +08:00
obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/
staging: ccree: introduce CryptoCell HW driver Introduce basic low level Arm TrustZone CryptoCell HW support. This first patch doesn't actually register any Crypto API transformations, these will follow up in the next patch. This first revision supports the CC 712 REE component. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-23 17:26:09 +08:00
obj-$(CONFIG_CRYPTO_DEV_CCREE) += ccree/
Copy Permalink