2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
linux-next/drivers/char/tile-srom.c

476 lines
12 KiB
C
Raw Normal View History

arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
/*
* Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*
* SPI Flash ROM driver
*
* This source code is derived from code provided in "Linux Device
* Drivers, Third Edition", by Jonathan Corbet, Alessandro Rubini, and
* Greg Kroah-Hartman, published by O'Reilly Media, Inc.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h> /* printk() */
#include <linux/slab.h> /* kmalloc() */
#include <linux/fs.h> /* everything... */
#include <linux/errno.h> /* error codes */
#include <linux/types.h> /* size_t */
#include <linux/proc_fs.h>
#include <linux/fcntl.h> /* O_ACCMODE */
#include <linux/pagemap.h>
#include <linux/hugetlb.h>
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <hv/hypervisor.h>
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/delay.h>
#include <hv/drv_srom_intf.h>
/*
* Size of our hypervisor I/O requests. We break up large transfers
* so that we don't spend large uninterrupted spans of time in the
* hypervisor. Erasing an SROM sector takes a significant fraction of
* a second, so if we allowed the user to, say, do one I/O to write the
* entire ROM, we'd get soft lockup timeouts, or worse.
*/
#define SROM_CHUNK_SIZE ((size_t)4096)
/*
* When hypervisor is busy (e.g. erasing), poll the status periodically.
*/
/*
* Interval to poll the state in msec
*/
#define SROM_WAIT_TRY_INTERVAL 20
/*
* Maximum times to poll the state
*/
#define SROM_MAX_WAIT_TRY_TIMES 1000
struct srom_dev {
int hv_devhdl; /* Handle for hypervisor device */
u32 total_size; /* Size of this device */
u32 sector_size; /* Size of a sector */
u32 page_size; /* Size of a page */
struct mutex lock; /* Allow only one accessor at a time */
};
static int srom_major; /* Dynamic major by default */
module_param(srom_major, int, 0);
MODULE_AUTHOR("Tilera Corporation");
MODULE_LICENSE("GPL");
static int srom_devs; /* Number of SROM partitions */
static struct cdev srom_cdev;
static struct platform_device *srom_parent;
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
static struct class *srom_class;
static struct srom_dev *srom_devices;
/*
* Handle calling the hypervisor and managing EAGAIN/EBUSY.
*/
static ssize_t _srom_read(int hv_devhdl, void *buf,
loff_t off, size_t count)
{
int retval, retries = SROM_MAX_WAIT_TRY_TIMES;
for (;;) {
retval = hv_dev_pread(hv_devhdl, 0, (HV_VirtAddr)buf,
count, off);
if (retval >= 0)
return retval;
if (retval == HV_EAGAIN)
continue;
if (retval == HV_EBUSY && --retries > 0) {
msleep(SROM_WAIT_TRY_INTERVAL);
continue;
}
pr_err("_srom_read: error %d\n", retval);
return -EIO;
}
}
static ssize_t _srom_write(int hv_devhdl, const void *buf,
loff_t off, size_t count)
{
int retval, retries = SROM_MAX_WAIT_TRY_TIMES;
for (;;) {
retval = hv_dev_pwrite(hv_devhdl, 0, (HV_VirtAddr)buf,
count, off);
if (retval >= 0)
return retval;
if (retval == HV_EAGAIN)
continue;
if (retval == HV_EBUSY && --retries > 0) {
msleep(SROM_WAIT_TRY_INTERVAL);
continue;
}
pr_err("_srom_write: error %d\n", retval);
return -EIO;
}
}
/**
* srom_open() - Device open routine.
* @inode: Inode for this device.
* @filp: File for this specific open of the device.
*
* Returns zero, or an error code.
*/
static int srom_open(struct inode *inode, struct file *filp)
{
filp->private_data = &srom_devices[iminor(inode)];
return 0;
}
/**
* srom_release() - Device release routine.
* @inode: Inode for this device.
* @filp: File for this specific open of the device.
*
* Returns zero, or an error code.
*/
static int srom_release(struct inode *inode, struct file *filp)
{
struct srom_dev *srom = filp->private_data;
char dummy;
/* Make sure we've flushed anything written to the ROM. */
mutex_lock(&srom->lock);
if (srom->hv_devhdl >= 0)
_srom_write(srom->hv_devhdl, &dummy, SROM_FLUSH_OFF, 1);
mutex_unlock(&srom->lock);
filp->private_data = NULL;
return 0;
}
/**
* srom_read() - Read data from the device.
* @filp: File for this specific open of the device.
* @buf: User's data buffer.
* @count: Number of bytes requested.
* @f_pos: File position.
*
* Returns number of bytes read, or an error code.
*/
static ssize_t srom_read(struct file *filp, char __user *buf,
size_t count, loff_t *f_pos)
{
int retval = 0;
void *kernbuf;
struct srom_dev *srom = filp->private_data;
kernbuf = kmalloc(SROM_CHUNK_SIZE, GFP_KERNEL);
if (!kernbuf)
return -ENOMEM;
if (mutex_lock_interruptible(&srom->lock)) {
retval = -ERESTARTSYS;
kfree(kernbuf);
return retval;
}
while (count) {
int hv_retval;
int bytes_this_pass = min(count, SROM_CHUNK_SIZE);
hv_retval = _srom_read(srom->hv_devhdl, kernbuf,
*f_pos, bytes_this_pass);
if (hv_retval <= 0) {
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
if (retval == 0)
retval = hv_retval;
break;
}
if (copy_to_user(buf, kernbuf, hv_retval) != 0) {
retval = -EFAULT;
break;
}
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
retval += hv_retval;
*f_pos += hv_retval;
buf += hv_retval;
count -= hv_retval;
}
mutex_unlock(&srom->lock);
kfree(kernbuf);
return retval;
}
/**
* srom_write() - Write data to the device.
* @filp: File for this specific open of the device.
* @buf: User's data buffer.
* @count: Number of bytes requested.
* @f_pos: File position.
*
* Returns number of bytes written, or an error code.
*/
static ssize_t srom_write(struct file *filp, const char __user *buf,
size_t count, loff_t *f_pos)
{
int retval = 0;
void *kernbuf;
struct srom_dev *srom = filp->private_data;
kernbuf = kmalloc(SROM_CHUNK_SIZE, GFP_KERNEL);
if (!kernbuf)
return -ENOMEM;
if (mutex_lock_interruptible(&srom->lock)) {
retval = -ERESTARTSYS;
kfree(kernbuf);
return retval;
}
while (count) {
int hv_retval;
int bytes_this_pass = min(count, SROM_CHUNK_SIZE);
if (copy_from_user(kernbuf, buf, bytes_this_pass) != 0) {
retval = -EFAULT;
break;
}
hv_retval = _srom_write(srom->hv_devhdl, kernbuf,
*f_pos, bytes_this_pass);
if (hv_retval <= 0) {
if (retval == 0)
retval = hv_retval;
break;
}
retval += hv_retval;
*f_pos += hv_retval;
buf += hv_retval;
count -= hv_retval;
}
mutex_unlock(&srom->lock);
kfree(kernbuf);
return retval;
}
/* Provide our own implementation so we can use srom->total_size. */
loff_t srom_llseek(struct file *file, loff_t offset, int origin)
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
{
struct srom_dev *srom = file->private_data;
return fixed_size_llseek(file, offset, origin, srom->total_size);
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
}
static ssize_t total_size_show(struct device *dev,
struct device_attribute *attr, char *buf)
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
{
struct srom_dev *srom = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", srom->total_size);
}
static DEVICE_ATTR_RO(total_size);
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
static ssize_t sector_size_show(struct device *dev,
struct device_attribute *attr, char *buf)
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
{
struct srom_dev *srom = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", srom->sector_size);
}
static DEVICE_ATTR_RO(sector_size);
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
static ssize_t page_size_show(struct device *dev,
struct device_attribute *attr, char *buf)
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
{
struct srom_dev *srom = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", srom->page_size);
}
static DEVICE_ATTR_RO(page_size);
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
static struct attribute *srom_dev_attrs[] = {
&dev_attr_total_size.attr,
&dev_attr_sector_size.attr,
&dev_attr_page_size.attr,
NULL,
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
};
ATTRIBUTE_GROUPS(srom_dev);
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
static char *srom_devnode(struct device *dev, umode_t *mode)
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
{
if (mode)
*mode = 0644;
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
return kasprintf(GFP_KERNEL, "srom/%s", dev_name(dev));
}
/*
* The fops
*/
static const struct file_operations srom_fops = {
.owner = THIS_MODULE,
.llseek = srom_llseek,
.read = srom_read,
.write = srom_write,
.open = srom_open,
.release = srom_release,
};
/**
* srom_setup_minor() - Initialize per-minor information.
* @srom: Per-device SROM state.
* @devhdl: Partition device handle.
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
*/
static int srom_setup_minor(struct srom_dev *srom, int devhdl)
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
{
srom->hv_devhdl = devhdl;
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
mutex_init(&srom->lock);
if (_srom_read(devhdl, &srom->total_size,
SROM_TOTAL_SIZE_OFF, sizeof(srom->total_size)) < 0)
return -EIO;
if (_srom_read(devhdl, &srom->sector_size,
SROM_SECTOR_SIZE_OFF, sizeof(srom->sector_size)) < 0)
return -EIO;
if (_srom_read(devhdl, &srom->page_size,
SROM_PAGE_SIZE_OFF, sizeof(srom->page_size)) < 0)
return -EIO;
return 0;
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
}
/** srom_init() - Initialize the driver's module. */
static int srom_init(void)
{
int result, i;
dev_t dev = MKDEV(srom_major, 0);
/*
* Start with a plausible number of partitions; the krealloc() call
* below will yield about log(srom_devs) additional allocations.
*/
srom_devices = kmalloc(4 * sizeof(struct srom_dev), GFP_KERNEL);
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
/* Discover the number of srom partitions. */
for (i = 0; ; i++) {
int devhdl;
char buf[20];
struct srom_dev *new_srom_devices =
krealloc(srom_devices, (i+1) * sizeof(struct srom_dev),
GFP_KERNEL);
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
if (!new_srom_devices) {
result = -ENOMEM;
goto fail_mem;
}
srom_devices = new_srom_devices;
sprintf(buf, "srom/0/%d", i);
devhdl = hv_dev_open((HV_VirtAddr)buf, 0);
if (devhdl < 0) {
if (devhdl != HV_ENODEV)
pr_notice("srom/%d: hv_dev_open failed: %d.\n",
i, devhdl);
break;
}
result = srom_setup_minor(&srom_devices[i], devhdl);
if (result != 0)
goto fail_mem;
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
}
srom_devs = i;
/* Bail out early if we have no partitions at all. */
if (srom_devs == 0) {
result = -ENODEV;
goto fail_mem;
}
/* Register our major, and accept a dynamic number. */
if (srom_major)
result = register_chrdev_region(dev, srom_devs, "srom");
else {
result = alloc_chrdev_region(&dev, 0, srom_devs, "srom");
srom_major = MAJOR(dev);
}
if (result < 0)
goto fail_mem;
/* Register a character device. */
cdev_init(&srom_cdev, &srom_fops);
srom_cdev.owner = THIS_MODULE;
srom_cdev.ops = &srom_fops;
result = cdev_add(&srom_cdev, dev, srom_devs);
if (result < 0)
goto fail_chrdev;
/* Create a parent device */
srom_parent = platform_device_register_simple("srom", -1, NULL, 0);
if (IS_ERR(srom_parent)) {
result = PTR_ERR(srom_parent);
goto fail_pdev;
}
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
/* Create a sysfs class. */
srom_class = class_create(THIS_MODULE, "srom");
if (IS_ERR(srom_class)) {
result = PTR_ERR(srom_class);
goto fail_cdev;
}
srom_class->dev_groups = srom_dev_groups;
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
srom_class->devnode = srom_devnode;
/* Create per-partition devices */
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
for (i = 0; i < srom_devs; i++) {
struct device *dev =
device_create(srom_class, &srom_parent->dev,
MKDEV(srom_major, i), srom_devices + i,
"%d", i);
result = PTR_ERR_OR_ZERO(dev);
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
if (result < 0)
goto fail_class;
}
return 0;
fail_class:
for (i = 0; i < srom_devs; i++)
device_destroy(srom_class, MKDEV(srom_major, i));
class_destroy(srom_class);
fail_cdev:
platform_device_unregister(srom_parent);
fail_pdev:
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
cdev_del(&srom_cdev);
fail_chrdev:
unregister_chrdev_region(dev, srom_devs);
fail_mem:
kfree(srom_devices);
return result;
}
/** srom_cleanup() - Clean up the driver's module. */
static void srom_cleanup(void)
{
int i;
for (i = 0; i < srom_devs; i++)
device_destroy(srom_class, MKDEV(srom_major, i));
class_destroy(srom_class);
cdev_del(&srom_cdev);
platform_device_unregister(srom_parent);
arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-06-11 01:07:48 +08:00
unregister_chrdev_region(MKDEV(srom_major, 0), srom_devs);
kfree(srom_devices);
}
module_init(srom_init);
module_exit(srom_cleanup);