renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 14:14:01 +08:00
Code
67acd8d5c6
linux-next/arch/mips/kernel/genex.S

544 lines
11 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 19:43:25 +08:00
* Copyright (C) 2002, 2007 Maciej W. Rozycki
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
* Copyright (C) 2001, 2012 MIPS Technologies, Inc. All rights reserved.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
#include <linux/init.h>
#include <asm/asm.h>
[MIPS] MT: Improved multithreading support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-05 16:45:45 +08:00
#include <asm/asmmacro.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/cacheops.h>
[MIPS] TRACE_IRQFLAGS_SUPPORT support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-07 21:07:18 +08:00
#include <asm/irqflags.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/regdef.h>
#include <asm/fpregdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
#include <asm/war.h>
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
#include <asm/thread_info.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
__INIT
/*
* General exception vector for all other CPUs.
*
* Be careful when changing this, it has to be at most 128 bytes
* to fit into space reserved for the exception handler.
*/
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
#endif
mfc0 k1, CP0_CAUSE
andi k1, k1, 0x7c
[PATCH] mips: clean up 32/64-bit configuration Start cleaning 32-bit vs. 64-bit configuration. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:16 +08:00
#ifdef CONFIG_64BIT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dsll k1, k1, 1
#endif
PTR_L k0, exception_handlers(k1)
jr k0
.set pop
END(except_vec3_generic)
/*
* General exception handler for CPUs with virtual coherency exception.
*
* Be careful when changing this, it has to be at most 256 (as a special
* exception) bytes to fit into space reserved for the exception handler.
*/
NESTED(except_vec3_r4000, 0, sp)
.set push
MIPS: Fix gigaton of warning building with microMIPS. With binutils 2.24 the attempt to switch with microMIPS mode to MIPS III mode through .set mips3 results in *lots* of warnings like {standard input}: Assembler messages: {standard input}:397: Warning: the 64-bit MIPS architecture does not support the `smartmips' extension during a kernel build. Fixed by using .set arch=r4000 instead. This breaks support for building the kernel with binutils 2.13 which was supported for 32 bit kernels only anyway and 2.14 which was a bad vintage for MIPS anyway. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-30 19:20:10 +08:00
.set arch=r4000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.set noat
mfc0 k1, CP0_CAUSE
li k0, 31<<2
andi k1, k1, 0x7c
.set push
.set noreorder
.set nomacro
beq k1, k0, handle_vced
li k0, 14<<2
beq k1, k0, handle_vcei
[PATCH] mips: clean up 32/64-bit configuration Start cleaning 32-bit vs. 64-bit configuration. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:16 +08:00
#ifdef CONFIG_64BIT
Fix typos and formatting. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2004-12-08 18:32:45 +08:00
dsll k1, k1, 1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
.set pop
PTR_L k0, exception_handlers(k1)
jr k0
/*
* Big shit, we now may have two dirty primary cache lines for the same
Fix typos and formatting. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2004-12-08 18:32:45 +08:00
* physical address. We can safely invalidate the line pointed to by
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* c0_badvaddr because after return from this exception handler the
* load / store will be re-executed.
*/
handle_vced:
Fix typos and formatting. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2004-12-08 18:32:45 +08:00
MFC0 k0, CP0_BADVADDR
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
li k1, -4 # Is this ...
and k0, k1 # ... really needed?
mtc0 zero, CP0_TAGLO
Fix typos and formatting. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2004-12-08 18:32:45 +08:00
cache Index_Store_Tag_D, (k0)
cache Hit_Writeback_Inv_SD, (k0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_PROC_FS
PTR_LA k0, vced_count
lw k1, (k0)
addiu k1, 1
sw k1, (k0)
#endif
eret
handle_vcei:
MFC0 k0, CP0_BADVADDR
cache Hit_Writeback_Inv_SD, (k0) # also cleans pi
#ifdef CONFIG_PROC_FS
PTR_LA k0, vcei_count
lw k1, (k0)
addiu k1, 1
sw k1, (k0)
#endif
eret
.set pop
END(except_vec3_r4000)
[MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-04 00:56:36 +08:00
__FINIT
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
.align 5 /* 32 byte rollback region */
MIPS: Idle: Break r4k_wait into two functions and fix it. local_irq_enable() may expand into very different code, so it rather should stay in C. Also this keeps the assembler code size constant which keeps the rollback code simple. So it's best to split r4k_wait into two parts, one C and one assembler. Finally add the local_irq_enable() to r4k_wait to ensure the WAIT instruction in __r4k_wait() will work properly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-21 23:33:32 +08:00
LEAF(__r4k_wait)
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
.set push
.set noreorder
/* start of rollback region */
LONG_L t0, TI_FLAGS($28)
nop
andi t0, _TIF_NEED_RESCHED
bnez t0, 1f
nop
nop
nop
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#ifdef CONFIG_CPU_MICROMIPS
nop
nop
nop
nop
#endif
MIPS: kernel: genex: Set correct ISA level The jr instruction opcode has changed in R6 so make sure the correct ISA level is set prior using that instruction. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-24 21:17:27 +08:00
.set MIPS_ISA_ARCH_LEVEL_RAW
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
wait
/* end of rollback region (the region size must be power of two) */
1:
jr ra
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
nop
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
.set pop
MIPS: Idle: Break r4k_wait into two functions and fix it. local_irq_enable() may expand into very different code, so it rather should stay in C. Also this keeps the assembler code size constant which keeps the rollback code simple. So it's best to split r4k_wait into two parts, one C and one assembler. Finally add the local_irq_enable() to r4k_wait to ensure the WAIT instruction in __r4k_wait() will work properly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-21 23:33:32 +08:00
END(__r4k_wait)
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
.macro BUILD_ROLLBACK_PROLOGUE handler
FEXPORT(rollback_\handler)
.set push
.set noat
MFC0 k0, CP0_EPC
MIPS: Idle: Break r4k_wait into two functions and fix it. local_irq_enable() may expand into very different code, so it rather should stay in C. Also this keeps the assembler code size constant which keeps the rollback code simple. So it's best to split r4k_wait into two parts, one C and one assembler. Finally add the local_irq_enable() to r4k_wait to ensure the WAIT instruction in __r4k_wait() will work properly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-21 23:33:32 +08:00
PTR_LA k1, __r4k_wait
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
ori k0, 0x1f /* 32 byte rollback region */
xori k0, 0x1f
bne k0, k1, 9f
MTC0 k0, CP0_EPC
9:
.set pop
.endm
MIPS: Whitespace cleanup. Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-22 19:59:30 +08:00
.align 5
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
BUILD_ROLLBACK_PROLOGUE handle_int
[MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-04 00:56:36 +08:00
NESTED(handle_int, PT_SIZE, sp)
[MIPS] lockdep: Deal with interrupt disable hazard in TRACE_IRQFLAGS Between the mtc0 or di instruction that disables interrupts and the following hazard barrier a processor may still take interrupts. If an interrupt is taken after interrupts are disabled but before the state is updated it will appear to restore_all that it is incorrectly returning with interrupts disabled. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-26 21:48:50 +08:00
#ifdef CONFIG_TRACE_IRQFLAGS
/*
* Check to see if the interrupted code has just disabled
* interrupts and ignore this interrupt for now if so.
*
* local_irq_disable() disables interrupts and then calls
* trace_hardirqs_off() to track the state. If an interrupt is taken
* after interrupts are disabled but before the state is updated
* it will appear to restore_all that it is incorrectly returning with
* interrupts disabled
*/
.set push
.set noat
mfc0 k0, CP0_STATUS
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
and k0, ST0_IEP
bnez k0, 1f
[MIPS] Fix typo in R3000 TRACE_IRQFLAGS code Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-07 00:08:48 +08:00
mfc0 k0, CP0_EPC
[MIPS] lockdep: Deal with interrupt disable hazard in TRACE_IRQFLAGS Between the mtc0 or di instruction that disables interrupts and the following hazard barrier a processor may still take interrupts. If an interrupt is taken after interrupts are disabled but before the state is updated it will appear to restore_all that it is incorrectly returning with interrupts disabled. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-26 21:48:50 +08:00
.set noreorder
j k0
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
rfe
[MIPS] lockdep: Deal with interrupt disable hazard in TRACE_IRQFLAGS Between the mtc0 or di instruction that disables interrupts and the following hazard barrier a processor may still take interrupts. If an interrupt is taken after interrupts are disabled but before the state is updated it will appear to restore_all that it is incorrectly returning with interrupts disabled. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-26 21:48:50 +08:00
#else
and k0, ST0_IE
bnez k0, 1f
eret
#endif
1:
.set pop
#endif
[MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-04 00:56:36 +08:00
SAVE_ALL
CLI
[MIPS] TRACE_IRQFLAGS_SUPPORT support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-07 21:07:18 +08:00
TRACE_IRQS_OFF
[MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-04 00:56:36 +08:00
[MIPS] Complete fixes after removal of pt_regs argument to int handlers. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:44:33 +08:00
LONG_L s0, TI_REGS($28)
LONG_S sp, TI_REGS($28)
[MIPS] ret_from_irq adjustment Make sure that RA on top of interrupt stack is an address of ret_from_irq, so that dump_stack etc. can trace info interrupted context. Also this patch fixes except_vec_vi_handler and __smtc_ipi_vector which seems broken. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:24:23 +08:00
PTR_LA ra, ret_from_irq
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
PTR_LA v0, plat_irq_dispatch
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
jr v0
#ifdef CONFIG_CPU_MICROMIPS
nop
#endif
[MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-04 00:56:36 +08:00
END(handle_int)
__INIT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Special interrupt vector for MIPS64 ISA & embedded MIPS processors.
* This is a dedicated interrupt exception vector which reduces the
* interrupt processing overhead. The jump instruction will be replaced
* at the initialization time.
*
* Be careful when changing this, it has to be at most 128 bytes
* to fit into space reserved for the exception handler.
*/
NESTED(except_vec4, 0, sp)
1: j 1b /* Dummy, will be replaced */
END(except_vec4)
/*
* EJTAG debug exception handler.
* The EJTAG debug exception entry point is 0xbfc00480, which
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
* normally is in the boot PROM, so the boot PROM must do an
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* unconditional jump to this vector.
*/
NESTED(except_vec_ejtag_debug, 0, sp)
j ejtag_debug_handler
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#ifdef CONFIG_CPU_MICROMIPS
nop
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
END(except_vec_ejtag_debug)
__FINIT
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
/*
* Vectored interrupt handler.
* This prototype is copied to ebase + n*IntCtl.VS and patched
* to invoke the handler
*/
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
BUILD_ROLLBACK_PROLOGUE except_vec_vi
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
NESTED(except_vec_vi, 0, sp)
SAVE_SOME
SAVE_AT
.set push
.set noreorder
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
PTR_LA v1, except_vec_vi_handler
[MIPS] Export except_vec_vi_{mori,lui,ori} as text symbols. Otherwise objdump will screw up disassembly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-19 23:29:39 +08:00
FEXPORT(except_vec_vi_lui)
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
lui v0, 0 /* Patched */
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
jr v1
[MIPS] Export except_vec_vi_{mori,lui,ori} as text symbols. Otherwise objdump will screw up disassembly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-19 23:29:39 +08:00
FEXPORT(except_vec_vi_ori)
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
ori v0, 0 /* Patched */
.set pop
END(except_vec_vi)
EXPORT(except_vec_vi_end)
/*
* Common Vectored Interrupt code
* Complete the register saves and invoke the handler which is passed in $v0
*/
NESTED(except_vec_vi_handler, 0, sp)
SAVE_TEMP
SAVE_STATIC
CLI
[MIPS] VI: TRACE_IRQS_OFF clobbers $v0, so save & restore around call. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-18 00:21:28 +08:00
#ifdef CONFIG_TRACE_IRQFLAGS
move s0, v0
[MIPS] TRACE_IRQFLAGS_SUPPORT support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-07 21:07:18 +08:00
TRACE_IRQS_OFF
[MIPS] VI: TRACE_IRQS_OFF clobbers $v0, so save & restore around call. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-18 00:21:28 +08:00
move v0, s0
#endif
[MIPS] Complete fixes after removal of pt_regs argument to int handlers. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:44:33 +08:00
LONG_L s0, TI_REGS($28)
LONG_S sp, TI_REGS($28)
[MIPS] Stacktrace build-fix and improvement Fix build error due to stacktrace API change. Now save_stack_trace() tries to save all kernel context, including interrupts and exception. Also some asm code are changed a bit so that we can detect the end of current context easily. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-28 18:15:33 +08:00
PTR_LA ra, ret_from_irq
[MIPS] ret_from_irq adjustment Make sure that RA on top of interrupt stack is an address of ret_from_irq, so that dump_stack etc. can trace info interrupted context. Also this patch fixes except_vec_vi_handler and __smtc_ipi_vector which seems broken. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:24:23 +08:00
jr v0
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
END(except_vec_vi_handler)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* EJTAG debug exception handler.
*/
NESTED(ejtag_debug_handler, PT_SIZE, sp)
.set push
.set noat
MTC0 k0, CP0_DESAVE
mfc0 k0, CP0_DEBUG
sll k0, k0, 30 # Check for SDBBP.
bgez k0, ejtag_return
PTR_LA k0, ejtag_debug_buffer
LONG_S k1, 0(k0)
SAVE_ALL
move a0, sp
jal ejtag_exception_handler
RESTORE_ALL
PTR_LA k0, ejtag_debug_buffer
LONG_L k1, 0(k0)
ejtag_return:
MFC0 k0, CP0_DESAVE
.set mips32
deret
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
.set pop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
END(ejtag_debug_handler)
/*
* This buffer is reserved for the use of the EJTAG debug
* handler.
*/
.data
EXPORT(ejtag_debug_buffer)
.fill LONGSIZE
.previous
__INIT
/*
* NMI debug exception handler for MIPS reference boards.
* The NMI debug exception entry point is 0xbfc00000, which
* normally is in the boot PROM, so the boot PROM must do a
* unconditional jump to this vector.
*/
NESTED(except_vec_nmi, 0, sp)
j nmi_handler
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#ifdef CONFIG_CPU_MICROMIPS
nop
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
END(except_vec_nmi)
__FINIT
NESTED(nmi_handler, PT_SIZE, sp)
.set push
.set noat
MIPS: Print correct PC in trace dump after NMI exception An NMI exception delivered from YAMON delivers the PC in ErrorPC instead of EPC. It's also necessary to clear the Status.BEV bit for the page fault exception handler to work properly. [ralf@linux-mips: Let the assembler do the loading of the mask value rather than the convoluted explicit %hi/%lo manual relocation sequence from the original patch.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6035/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-08 19:39:31 +08:00
/*
* Clear ERL - restore segment mapping
* Clear BEV - required for page fault exception handler to work
*/
mfc0 k0, CP0_STATUS
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
ori k0, k0, ST0_EXL
MIPS: Print correct PC in trace dump after NMI exception An NMI exception delivered from YAMON delivers the PC in ErrorPC instead of EPC. It's also necessary to clear the Status.BEV bit for the page fault exception handler to work properly. [ralf@linux-mips: Let the assembler do the loading of the mask value rather than the convoluted explicit %hi/%lo manual relocation sequence from the original patch.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6035/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-08 19:39:31 +08:00
li k1, ~(ST0_BEV | ST0_ERL)
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
and k0, k0, k1
mtc0 k0, CP0_STATUS
MIPS: Print correct PC in trace dump after NMI exception An NMI exception delivered from YAMON delivers the PC in ErrorPC instead of EPC. It's also necessary to clear the Status.BEV bit for the page fault exception handler to work properly. [ralf@linux-mips: Let the assembler do the loading of the mask value rather than the convoluted explicit %hi/%lo manual relocation sequence from the original patch.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6035/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-08 19:39:31 +08:00
_ehb
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
SAVE_ALL
MIPS: Whitespace cleanup. Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-22 19:59:30 +08:00
move a0, sp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
jal nmi_exception_handler
MIPS: Print correct PC in trace dump after NMI exception An NMI exception delivered from YAMON delivers the PC in ErrorPC instead of EPC. It's also necessary to clear the Status.BEV bit for the page fault exception handler to work properly. [ralf@linux-mips: Let the assembler do the loading of the mask value rather than the convoluted explicit %hi/%lo manual relocation sequence from the original patch.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6035/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-08 19:39:31 +08:00
/* nmi_exception_handler never returns */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.set pop
END(nmi_handler)
.macro __build_clear_none
.endm
.macro __build_clear_sti
[MIPS] TRACE_IRQFLAGS_SUPPORT support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-07 21:07:18 +08:00
TRACE_IRQS_ON
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
STI
.endm
.macro __build_clear_cli
CLI
[MIPS] TRACE_IRQFLAGS_SUPPORT support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-07 21:07:18 +08:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
.macro __build_clear_fpe
MIPS: Override assembler target architecture for octeon. Gas from binutils 2.19 fails to compile some cop1 instructions with -march=octeon. Since the cop1 instructions are present in mips1, use that arch instead. This will be fixed in binutils 2.20. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12 07:33:25 +08:00
.set push
/* gas fails to assemble cfc1 for some archs (octeon).*/ \
.set mips1
MIPS: Fix build with binutils 2.24.51+ Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-07 21:13:54 +08:00
SET_HARDFLOAT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
cfc1 a1, fcr31
MIPS: Override assembler target architecture for octeon. Gas from binutils 2.19 fails to compile some cop1 instructions with -march=octeon. Since the cop1 instructions are present in mips1, use that arch instead. This will be fixed in binutils 2.20. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12 07:33:25 +08:00
.set pop
MIPS: Clear [MSA]FPE CSR.Cause after notify_die() When handling floating point exceptions (FPEs) and MSA FPEs the Cause bits of the appropriate control and status register (FCSR for FPEs and MSACSR for MSA FPEs) are read and cleared before enabling interrupts, presumably so that it doesn't have to go through the pain of restoring those bits if the process is pre-empted, since writing those bits would cause another immediate exception while still in the kernel. The bits aren't normally ever restored again, since userland never expects to see them set. However for virtualisation it is necessary for the kernel to be able to restore these Cause bits, as the guest may have been interrupted in an FP exception handler but before it could read the Cause bits. This can be done by registering a die notifier, to get notified of the exception when such a value is restored, and if the PC was at the instruction which is used to restore the guest state, the handler can step over it and continue execution. The Cause bits can then remain set without causing further exceptions. For this to work safely a few changes are made: - __build_clear_fpe and __build_clear_msa_fpe no longer clear the Cause bits, and now return from exception level with interrupts disabled instead of enabled. - do_fpe() now clears the Cause bits and enables interrupts after notify_die() is called, so that the notifier can chose to return from exception without this happening. - do_msa_fpe() acts similarly, but now actually makes use of the second argument (msacsr) and calls notify_die() with the new DIE_MSAFP, allowing die notifiers to be informed of MSA FPEs too. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-12-02 21:44:13 +08:00
CLI
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
MIPS: clear MSACSR cause bits when handling MSA FP exception Much like for traditional scalar FP exceptions, the cause bits in the MSACSR register need to be cleared following an MSA FP exception. Without doing so the exception will simply be raised again whenever the kernel restores MSACSR from a tasks saved context, leading to undesirable spurious exceptions. Clear the cause bits from the handle_msa_fpe function, mirroring the way handle_fpe clears the cause bits in FCSR. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-30 20:09:34 +08:00
.macro __build_clear_msa_fpe
_cfcmsa a1, MSA_CSR
MIPS: Clear [MSA]FPE CSR.Cause after notify_die() When handling floating point exceptions (FPEs) and MSA FPEs the Cause bits of the appropriate control and status register (FCSR for FPEs and MSACSR for MSA FPEs) are read and cleared before enabling interrupts, presumably so that it doesn't have to go through the pain of restoring those bits if the process is pre-empted, since writing those bits would cause another immediate exception while still in the kernel. The bits aren't normally ever restored again, since userland never expects to see them set. However for virtualisation it is necessary for the kernel to be able to restore these Cause bits, as the guest may have been interrupted in an FP exception handler but before it could read the Cause bits. This can be done by registering a die notifier, to get notified of the exception when such a value is restored, and if the PC was at the instruction which is used to restore the guest state, the handler can step over it and continue execution. The Cause bits can then remain set without causing further exceptions. For this to work safely a few changes are made: - __build_clear_fpe and __build_clear_msa_fpe no longer clear the Cause bits, and now return from exception level with interrupts disabled instead of enabled. - do_fpe() now clears the Cause bits and enables interrupts after notify_die() is called, so that the notifier can chose to return from exception without this happening. - do_msa_fpe() acts similarly, but now actually makes use of the second argument (msacsr) and calls notify_die() with the new DIE_MSAFP, allowing die notifiers to be informed of MSA FPEs too. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-12-02 21:44:13 +08:00
CLI
TRACE_IRQS_OFF
MIPS: clear MSACSR cause bits when handling MSA FP exception Much like for traditional scalar FP exceptions, the cause bits in the MSACSR register need to be cleared following an MSA FP exception. Without doing so the exception will simply be raised again whenever the kernel restores MSACSR from a tasks saved context, leading to undesirable spurious exceptions. Clear the cause bits from the handle_msa_fpe function, mirroring the way handle_fpe clears the cause bits in FCSR. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-30 20:09:34 +08:00
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.macro __build_clear_ade
MFC0 t0, CP0_BADVADDR
PTR_S t0, PT_BVADDR(sp)
KMODE
.endm
.macro __BUILD_silent exception
.endm
/* Gas tries to parse the PRINT argument as a string containing
string escapes and emits bogus warnings if it believes to
recognize an unknown escape code. So make the arguments
start with an n and gas will believe \n is ok ... */
MIPS: Whitespace cleanup. Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-22 19:59:30 +08:00
.macro __BUILD_verbose nexception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
LONG_L a1, PT_EPC(sp)
[PATCH] mips: fix build warnings This patch has fixed the following warnings. arch/mips/kernel/genex.S:250:5: warning: "CONFIG_64BIT" is not defined arch/mips/math-emu/cp1emu.c:1128:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:1206:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:1270:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:323:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:808:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:953:5: warning: "__mips64" is not defined arch/mips/mm/tlbex.c:519:5: warning: "CONFIG_64BIT" is not defined include/asm/reg.h:73:5: warning: "CONFIG_64BIT" is not defined Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:22 +08:00
#ifdef CONFIG_32BIT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PRINT("Got \nexception at %08lx\012")
[PATCH] mips: nuke trailing whitespace Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:17 +08:00
#endif
[PATCH] mips: fix build warnings This patch has fixed the following warnings. arch/mips/kernel/genex.S:250:5: warning: "CONFIG_64BIT" is not defined arch/mips/math-emu/cp1emu.c:1128:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:1206:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:1270:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:323:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:808:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:953:5: warning: "__mips64" is not defined arch/mips/mm/tlbex.c:519:5: warning: "CONFIG_64BIT" is not defined include/asm/reg.h:73:5: warning: "CONFIG_64BIT" is not defined Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:22 +08:00
#ifdef CONFIG_64BIT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PRINT("Got \nexception at %016lx\012")
[PATCH] mips: nuke trailing whitespace Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:17 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
.macro __BUILD_count exception
LONG_L t0,exception_count_\exception
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
LONG_ADDIU t0, 1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
LONG_S t0,exception_count_\exception
.comm exception_count\exception, 8, 8
.endm
.macro __BUILD_HANDLER exception handler clear verbose ext
.align 5
NESTED(handle_\exception, PT_SIZE, sp)
.set noat
SAVE_ALL
FEXPORT(handle_\exception\ext)
MIPS: Fix LLVM build issue. Matthew Fortune <Matthew.Fortune@imgtec.com> reports: The genex.S file appears to mix the case of a macro between its definition and use. A cut down example of this is below. The macro __build_clear_none has lower case 'build' but ends up being instantiated with upper case BUILD. Can this be fixed on master. It has been picked up by the LLVM integrated assembler which is currently case sensitive. We are likely to fix the assembler as well but the code is currently inconsistent in the kernel. .macro __build_clear_none .endm .macro __BUILD_HANDLER exception handler clear verbose ext .align 5 .globl handle_\exception; .align 2; .type handle_\exception, @function; .ent handle_\exception, 0; handle_\exception: .frame $29, 184, $29 .set noat .globl handle_\exception\ext; .type handle_\exception\ext, @function; handle_\exception\ext: __BUILD_clear_\clear .endm .macro BUILD_HANDLER exception handler clear verbose __BUILD_HANDLER \exception \handler \clear \verbose _int .endm BUILD_HANDLER ftlb ftlb none silent Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Matthew Fortune <Matthew.Fortune@imgtec.com>
2015-08-18 17:25:50 +08:00
__build_clear_\clear
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.set at
__BUILD_\verbose \exception
move a0, sp
[MIPS] Stacktrace build-fix and improvement Fix build error due to stacktrace API change. Now save_stack_trace() tries to save all kernel context, including interrupts and exception. Also some asm code are changed a bit so that we can detect the end of current context easily. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-28 18:15:33 +08:00
PTR_LA ra, ret_from_exception
j do_\handler
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
END(handle_\exception)
.endm
.macro BUILD_HANDLER exception handler clear verbose
MIPS: Whitespace cleanup. Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-22 19:59:30 +08:00
__BUILD_HANDLER \exception \handler \clear \verbose _int
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
BUILD_HANDLER adel ade ade silent /* #4 */
BUILD_HANDLER ades ade ade silent /* #5 */
BUILD_HANDLER ibe be cli silent /* #6 */
BUILD_HANDLER dbe be cli silent /* #7 */
BUILD_HANDLER bp bp sti silent /* #9 */
BUILD_HANDLER ri ri sti silent /* #10 */
BUILD_HANDLER cpu cpu sti silent /* #11 */
BUILD_HANDLER ov ov sti silent /* #12 */
BUILD_HANDLER tr tr sti silent /* #13 */
MIPS: clear MSACSR cause bits when handling MSA FP exception Much like for traditional scalar FP exceptions, the cause bits in the MSACSR register need to be cleared following an MSA FP exception. Without doing so the exception will simply be raised again whenever the kernel restores MSACSR from a tasks saved context, leading to undesirable spurious exceptions. Clear the cause bits from the handle_msa_fpe function, mirroring the way handle_fpe clears the cause bits in FCSR. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-30 20:09:34 +08:00
BUILD_HANDLER msa_fpe msa_fpe msa_fpe silent /* #14 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BUILD_HANDLER fpe fpe fpe silent /* #15 */
MIPS: Add support for FTLBs The Fixed Page Size TLB (FTLB) is a set-associative dual entry TLB. Its purpose is to reduce the number of TLB misses by increasing the effective TLB size and keep the implementation complexity to minimum levels. A supported core can have both VTLB and FTLB. Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6139/
2013-11-15 00:12:31 +08:00
BUILD_HANDLER ftlb ftlb none silent /* #16 */
MIPS: Basic MSA context switching support This patch adds support for context switching the MSA vector registers. These 128 bit vector registers are aliased with the FP registers - an FP register accesses the least significant bits of the vector register with which it is aliased (ie. the register with the same index). Due to both this & the requirement that the scalar FPU must be 64-bit (FR=1) if enabled at the same time as MSA the kernel will enable MSA & scalar FP at the same time for tasks which use MSA. If we restore the MSA vector context then we might as well enable the scalar FPU since the reason it was left disabled was to allow for lazy FP context restoring - but we just restored the FP context as it's a subset of the vector context. If we restore the FP context and have previously used MSA then we have to restore the whole vector context anyway (see comment in enable_restore_fp_context for details) so similarly we might as well enable MSA. Thus if a task does not use MSA then it will continue to behave as without this patch - the scalar FP context will be saved & restored as usual. But if a task executes an MSA instruction then it will save & restore the vector context forever more. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6431/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-27 23:23:11 +08:00
BUILD_HANDLER msa msa sti silent /* #21 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BUILD_HANDLER mdmx mdmx sti silent /* #22 */
MIPS: Whitespace cleanup. Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-22 19:59:30 +08:00
#ifdef CONFIG_HARDWARE_WATCHPOINTS
MIPS: Read watch registers with interrupts disabled. If a context switch occurred between the watch exception and reading the watch registers, it would be possible for the new process to corrupt their state. Enabling interrupts only after the watch registers are read avoids this race. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-06 07:29:58 +08:00
/*
* For watch, interrupts will be enabled after the watch
* registers are read.
*/
BUILD_HANDLER watch watch cli silent /* #23 */
MIPS: Watch exception handling for HARDWARE_WATCHPOINTS. Here we hook up the watch exception handler so that it sends SIGTRAP when the hardware watch registers are triggered. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-23 15:08:45 +08:00
#else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BUILD_HANDLER watch watch sti verbose /* #23 */
MIPS: Watch exception handling for HARDWARE_WATCHPOINTS. Here we hook up the watch exception handler so that it sends SIGTRAP when the hardware watch registers are triggered. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-23 15:08:45 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BUILD_HANDLER mcheck mcheck cli verbose /* #24 */
[MIPS] Less noise on multithreading exceptions. Make the MT handler silent and output the MT exception type at debug priority. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-30 21:19:45 +08:00
BUILD_HANDLER mt mt sti silent /* #25 */
Support the MIPS32 / MIPS64 DSP ASE. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-05-31 19:49:19 +08:00
BUILD_HANDLER dsp dsp sti silent /* #26 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BUILD_HANDLER reserved reserved sti verbose /* others */
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
.align 5
LEAF(handle_ri_rdhwr_vivt)
.set push
.set noat
.set noreorder
/* check if TLB contains a entry for EPC */
MFC0 k1, CP0_ENTRYHI
MIPS: Support extended ASIDs Add support for extended ASIDs as determined by the Config4.AE bit. Since the only supported CPUs known to implement this are Netlogic XLP and MIPS I6400, select this variable ASID support based upon CONFIG_CPU_XLP and CONFIG_CPU_MIPSR6. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C. <jchandra@broadcom.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-06 21:36:24 +08:00
andi k1, MIPS_ENTRYHI_ASID | MIPS_ENTRYHI_ASIDX
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
MFC0 k0, CP0_EPC
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
PTR_SRL k0, _PAGE_SHIFT + 1
PTR_SLL k0, _PAGE_SHIFT + 1
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
or k1, k0
MTC0 k1, CP0_ENTRYHI
mtc0_tlbw_hazard
tlbp
tlb_probe_hazard
mfc0 k1, CP0_INDEX
.set pop
bltz k1, handle_ri /* slow path */
/* fall thru */
END(handle_ri_rdhwr_vivt)
LEAF(handle_ri_rdhwr)
.set push
.set noat
.set noreorder
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
/* MIPS32: 0x7c03e83b: rdhwr v1,$29 */
/* microMIPS: 0x007d6b3c: rdhwr v1,$29 */
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
MFC0 k1, CP0_EPC
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS64_R2)
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
and k0, k1, 1
beqz k0, 1f
xor k1, k0
lhu k0, (k1)
lhu k1, 2(k1)
ins k1, k0, 16, 16
lui k0, 0x007d
b docheck
ori k0, 0x6b3c
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
1:
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
lui k0, 0x7c03
lw k1, (k1)
ori k0, 0xe83b
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#else
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
andi k0, k1, 1
bnez k0, handle_ri
lui k0, 0x7c03
lw k1, (k1)
ori k0, 0xe83b
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#endif
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
.set reorder
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
docheck:
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
bne k0, k1, handle_ri /* if not ours */
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
isrdhwr:
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
/* The insn is rdhwr. No need to check CAUSE.BD here. */
get_saved_sp /* k1 := current_thread_info */
.set noreorder
MFC0 k0, CP0_EPC
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
ori k1, _THREAD_MASK
xori k1, _THREAD_MASK
LONG_L v1, TI_TP_VALUE(k1)
LONG_ADDIU k0, 4
jr k0
rfe
#else
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 19:43:25 +08:00
#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
LONG_ADDIU k0, 4 /* stall on $k0 */
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 19:43:25 +08:00
#else
.set at=v1
LONG_ADDIU k0, 4
.set noat
#endif
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
MTC0 k0, CP0_EPC
/* I hope three instructions between MTC0 and ERET are enough... */
ori k1, _THREAD_MASK
xori k1, _THREAD_MASK
LONG_L v1, TI_TP_VALUE(k1)
MIPS: Fix gigaton of warning building with microMIPS. With binutils 2.24 the attempt to switch with microMIPS mode to MIPS III mode through .set mips3 results in *lots* of warnings like {standard input}: Assembler messages: {standard input}:397: Warning: the 64-bit MIPS architecture does not support the `smartmips' extension during a kernel build. Fixed by using .set arch=r4000 instead. This breaks support for building the kernel with binutils 2.13 which was supported for 32 bit kernels only anyway and 2.14 which was a bad vintage for MIPS anyway. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-30 19:20:10 +08:00
.set arch=r4000
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
eret
.set mips0
#endif
.set pop
END(handle_ri_rdhwr)
[PATCH] mips: clean up 32/64-bit configuration Start cleaning 32-bit vs. 64-bit configuration. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:16 +08:00
#ifdef CONFIG_64BIT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* A temporary overflow handler used by check_daddi(). */
__INIT
BUILD_HANDLER daddi_ov daddi_ov none silent /* #12 */
#endif
Copy Permalink