2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
linux-next/fs/ocfs2/aops.c

2489 lines
62 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/* -*- mode: c; c-basic-offset: 8; -*-
* vim: noexpandtab sw=8 ts=8 sts=0:
*
* Copyright (C) 2002, 2004 Oracle. All rights reserved.
*/
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <asm/byteorder.h>
#include <linux/swap.h>
#include <linux/mpage.h>
#include <linux/quotaops.h>
#include <linux/blkdev.h>
#include <linux/uio.h>
#include <linux/mm.h>
#include <cluster/masklog.h>
#include "ocfs2.h"
#include "alloc.h"
#include "aops.h"
#include "dlmglue.h"
#include "extent_map.h"
#include "file.h"
#include "inode.h"
#include "journal.h"
#include "suballoc.h"
#include "super.h"
#include "symlink.h"
#include "refcounttree.h"
#include "ocfs2_trace.h"
#include "buffer_head_io.h"
#include "dir.h"
#include "namei.h"
#include "sysfile.h"
static int ocfs2_symlink_get_block(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
int err = -EIO;
int status;
struct ocfs2_dinode *fe = NULL;
struct buffer_head *bh = NULL;
struct buffer_head *buffer_cache_bh = NULL;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
void *kaddr;
trace_ocfs2_symlink_get_block(
(unsigned long long)OCFS2_I(inode)->ip_blkno,
(unsigned long long)iblock, bh_result, create);
BUG_ON(ocfs2_inode_is_fast_symlink(inode));
if ((iblock << inode->i_sb->s_blocksize_bits) > PATH_MAX + 1) {
mlog(ML_ERROR, "block offset > PATH_MAX: %llu",
(unsigned long long)iblock);
goto bail;
}
status = ocfs2_read_inode_block(inode, &bh);
if (status < 0) {
mlog_errno(status);
goto bail;
}
fe = (struct ocfs2_dinode *) bh->b_data;
if ((u64)iblock >= ocfs2_clusters_to_blocks(inode->i_sb,
le32_to_cpu(fe->i_clusters))) {
err = -ENOMEM;
mlog(ML_ERROR, "block offset is outside the allocated size: "
"%llu\n", (unsigned long long)iblock);
goto bail;
}
/* We don't use the page cache to create symlink data, so if
* need be, copy it over from the buffer cache. */
if (!buffer_uptodate(bh_result) && ocfs2_inode_is_new(inode)) {
u64 blkno = le64_to_cpu(fe->id2.i_list.l_recs[0].e_blkno) +
iblock;
buffer_cache_bh = sb_getblk(osb->sb, blkno);
if (!buffer_cache_bh) {
err = -ENOMEM;
mlog(ML_ERROR, "couldn't getblock for symlink!\n");
goto bail;
}
/* we haven't locked out transactions, so a commit
* could've happened. Since we've got a reference on
* the bh, even if it commits while we're doing the
* copy, the data is still good. */
if (buffer_jbd(buffer_cache_bh)
&& ocfs2_inode_is_new(inode)) {
kaddr = kmap_atomic(bh_result->b_page);
if (!kaddr) {
mlog(ML_ERROR, "couldn't kmap!\n");
goto bail;
}
memcpy(kaddr + (bh_result->b_size * iblock),
buffer_cache_bh->b_data,
bh_result->b_size);
kunmap_atomic(kaddr);
set_buffer_uptodate(bh_result);
}
brelse(buffer_cache_bh);
}
map_bh(bh_result, inode->i_sb,
le64_to_cpu(fe->id2.i_list.l_recs[0].e_blkno) + iblock);
err = 0;
bail:
brelse(bh);
return err;
}
ocfs2: ip_alloc_sem should be taken in ocfs2_get_block() ip_alloc_sem should be taken in ocfs2_get_block() when reading file in DIRECT mode to prevent concurrent access to extent tree with ocfs2_dio_end_io_write(), which may cause BUGON in the following situation: read file 'A' end_io of writing file 'A' vfs_read __vfs_read ocfs2_file_read_iter generic_file_read_iter ocfs2_direct_IO __blockdev_direct_IO do_blockdev_direct_IO do_direct_IO get_more_blocks ocfs2_get_block ocfs2_extent_map_get_blocks ocfs2_get_clusters ocfs2_get_clusters_nocache() ocfs2_search_extent_list return the index of record which contains the v_cluster, that is v_cluster > rec[i]->e_cpos. ocfs2_dio_end_io ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem); ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ... --> modify the rec[i]->e_cpos, resulting in v_cluster < rec[i]->e_cpos. BUG_ON(v_cluster < le32_to_cpu(rec->e_cpos)) [alex.chen@huawei.com: v3] Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Fixes: c15471f79506 ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Gang He <ghe@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 09:31:44 +08:00
static int ocfs2_lock_get_block(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
int ret = 0;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
down_read(&oi->ip_alloc_sem);
ret = ocfs2_get_block(inode, iblock, bh_result, create);
up_read(&oi->ip_alloc_sem);
return ret;
}
int ocfs2_get_block(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
int err = 0;
unsigned int ext_flags;
u64 max_blocks = bh_result->b_size >> inode->i_blkbits;
u64 p_blkno, count, past_eof;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
trace_ocfs2_get_block((unsigned long long)OCFS2_I(inode)->ip_blkno,
(unsigned long long)iblock, bh_result, create);
if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE)
mlog(ML_NOTICE, "get_block on system inode 0x%p (%lu)\n",
inode, inode->i_ino);
if (S_ISLNK(inode->i_mode)) {
/* this always does I/O for some reason. */
err = ocfs2_symlink_get_block(inode, iblock, bh_result, create);
goto bail;
}
err = ocfs2_extent_map_get_blocks(inode, iblock, &p_blkno, &count,
&ext_flags);
if (err) {
mlog(ML_ERROR, "Error %d from get_blocks(0x%p, %llu, 1, "
"%llu, NULL)\n", err, inode, (unsigned long long)iblock,
(unsigned long long)p_blkno);
goto bail;
}
if (max_blocks < count)
count = max_blocks;
/*
* ocfs2 never allocates in this function - the only time we
* need to use BH_New is when we're extending i_size on a file
* system which doesn't support holes, in which case BH_New
* allows __block_write_begin() to zero.
*
* If we see this on a sparse file system, then a truncate has
* raced us and removed the cluster. In this case, we clear
* the buffers dirty and uptodate bits and let the buffer code
* ignore it as a hole.
*/
if (create && p_blkno == 0 && ocfs2_sparse_alloc(osb)) {
clear_buffer_dirty(bh_result);
clear_buffer_uptodate(bh_result);
goto bail;
}
/* Treat the unwritten extent as a hole for zeroing purposes. */
if (p_blkno && !(ext_flags & OCFS2_EXT_UNWRITTEN))
map_bh(bh_result, inode->i_sb, p_blkno);
bh_result->b_size = count << inode->i_blkbits;
if (!ocfs2_sparse_alloc(osb)) {
if (p_blkno == 0) {
err = -EIO;
mlog(ML_ERROR,
"iblock = %llu p_blkno = %llu blkno=(%llu)\n",
(unsigned long long)iblock,
(unsigned long long)p_blkno,
(unsigned long long)OCFS2_I(inode)->ip_blkno);
mlog(ML_ERROR, "Size %llu, clusters %u\n", (unsigned long long)i_size_read(inode), OCFS2_I(inode)->ip_clusters);
dump_stack();
goto bail;
}
}
ocfs2: Zero the tail cluster when extending past i_size. ocfs2's allocation unit is the cluster. This can be larger than a block or even a memory page. This means that a file may have many blocks in its last extent that are beyond the block containing i_size. There also may be more unwritten extents after that. When ocfs2 grows a file, it zeros the entire cluster in order to ensure future i_size growth will see cleared blocks. Unfortunately, block_write_full_page() drops the pages past i_size. This means that ocfs2 is actually leaking garbage data into the tail end of that last cluster. This is a bug. We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect when a write or truncate is past i_size. They will use ocfs2_zero_extend() to ensure the data is properly zeroed. Older versions of ocfs2_zero_extend() simply zeroed every block between i_size and the zeroing position. This presumes three things: 1) There is allocation for all of these blocks. 2) The extents are not unwritten. 3) The extents are not refcounted. (1) and (2) hold true for non-sparse filesystems, which used to be the only users of ocfs2_zero_extend(). (3) is another bug. Since we're now using ocfs2_zero_extend() for sparse filesystems as well, we teach ocfs2_zero_extend() to check every extent between i_size and the zeroing position. If the extent is unwritten, it is ignored. If it is refcounted, it is CoWed. Then it is zeroed. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-07-02 06:13:31 +08:00
past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
trace_ocfs2_get_block_end((unsigned long long)OCFS2_I(inode)->ip_blkno,
(unsigned long long)past_eof);
ocfs2: Zero the tail cluster when extending past i_size. ocfs2's allocation unit is the cluster. This can be larger than a block or even a memory page. This means that a file may have many blocks in its last extent that are beyond the block containing i_size. There also may be more unwritten extents after that. When ocfs2 grows a file, it zeros the entire cluster in order to ensure future i_size growth will see cleared blocks. Unfortunately, block_write_full_page() drops the pages past i_size. This means that ocfs2 is actually leaking garbage data into the tail end of that last cluster. This is a bug. We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect when a write or truncate is past i_size. They will use ocfs2_zero_extend() to ensure the data is properly zeroed. Older versions of ocfs2_zero_extend() simply zeroed every block between i_size and the zeroing position. This presumes three things: 1) There is allocation for all of these blocks. 2) The extents are not unwritten. 3) The extents are not refcounted. (1) and (2) hold true for non-sparse filesystems, which used to be the only users of ocfs2_zero_extend(). (3) is another bug. Since we're now using ocfs2_zero_extend() for sparse filesystems as well, we teach ocfs2_zero_extend() to check every extent between i_size and the zeroing position. If the extent is unwritten, it is ignored. If it is refcounted, it is CoWed. Then it is zeroed. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-07-02 06:13:31 +08:00
if (create && (iblock >= past_eof))
set_buffer_new(bh_result);
bail:
if (err < 0)
err = -EIO;
return err;
}
int ocfs2_read_inline_data(struct inode *inode, struct page *page,
struct buffer_head *di_bh)
{
void *kaddr;
loff_t size;
struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
if (!(le16_to_cpu(di->i_dyn_features) & OCFS2_INLINE_DATA_FL)) {
ocfs2_error(inode->i_sb, "Inode %llu lost inline data flag\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno);
return -EROFS;
}
size = i_size_read(inode);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
if (size > PAGE_SIZE ||
size > ocfs2_max_inline_data_with_xattr(inode->i_sb, di)) {
ocfs2_error(inode->i_sb,
"Inode %llu has with inline data has bad size: %Lu\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno,
(unsigned long long)size);
return -EROFS;
}
kaddr = kmap_atomic(page);
if (size)
memcpy(kaddr, di->id2.i_data.id_data, size);
/* Clear the remaining part of the page */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
memset(kaddr + size, 0, PAGE_SIZE - size);
flush_dcache_page(page);
kunmap_atomic(kaddr);
SetPageUptodate(page);
return 0;
}
static int ocfs2_readpage_inline(struct inode *inode, struct page *page)
{
int ret;
struct buffer_head *di_bh = NULL;
BUG_ON(!PageLocked(page));
BUG_ON(!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL));
ret = ocfs2_read_inode_block(inode, &di_bh);
if (ret) {
mlog_errno(ret);
goto out;
}
ret = ocfs2_read_inline_data(inode, page, di_bh);
out:
unlock_page(page);
brelse(di_bh);
return ret;
}
static int ocfs2_readpage(struct file *file, struct page *page)
{
struct inode *inode = page->mapping->host;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
loff_t start = (loff_t)page->index << PAGE_SHIFT;
int ret, unlock = 1;
trace_ocfs2_readpage((unsigned long long)oi->ip_blkno,
(page ? page->index : 0));
ret = ocfs2_inode_lock_with_page(inode, NULL, 0, page);
if (ret != 0) {
if (ret == AOP_TRUNCATED_PAGE)
unlock = 0;
mlog_errno(ret);
goto out;
}
if (down_read_trylock(&oi->ip_alloc_sem) == 0) {
/*
* Unlock the page and cycle ip_alloc_sem so that we don't
* busyloop waiting for ip_alloc_sem to unlock
*/
ret = AOP_TRUNCATED_PAGE;
unlock_page(page);
unlock = 0;
down_read(&oi->ip_alloc_sem);
up_read(&oi->ip_alloc_sem);
goto out_inode_unlock;
}
/*
* i_size might have just been updated as we grabed the meta lock. We
* might now be discovering a truncate that hit on another node.
* block_read_full_page->get_block freaks out if it is asked to read
* beyond the end of a file, so we check here. Callers
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
* (generic_file_read, vm_ops->fault) are clever enough to check i_size
* and notice that the page they just read isn't needed.
*
* XXX sys_readahead() seems to get that wrong?
*/
if (start >= i_size_read(inode)) {
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:29 +08:00
zero_user(page, 0, PAGE_SIZE);
SetPageUptodate(page);
ret = 0;
goto out_alloc;
}
if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
ret = ocfs2_readpage_inline(inode, page);
else
ret = block_read_full_page(page, ocfs2_get_block);
unlock = 0;
out_alloc:
up_read(&oi->ip_alloc_sem);
out_inode_unlock:
ocfs2_inode_unlock(inode, 0);
out:
if (unlock)
unlock_page(page);
return ret;
}
/*
* This is used only for read-ahead. Failures or difficult to handle
* situations are safe to ignore.
*
* Right now, we don't bother with BH_Boundary - in-inode extent lists
* are quite large (243 extents on 4k blocks), so most inodes don't
* grow out to a tree. If need be, detecting boundary extents could
* trivially be added in a future version of ocfs2_get_block().
*/
static int ocfs2_readpages(struct file *filp, struct address_space *mapping,
struct list_head *pages, unsigned nr_pages)
{
int ret, err = -EIO;
struct inode *inode = mapping->host;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
loff_t start;
struct page *last;
/*
* Use the nonblocking flag for the dlm code to avoid page
* lock inversion, but don't bother with retrying.
*/
ret = ocfs2_inode_lock_full(inode, NULL, 0, OCFS2_LOCK_NONBLOCK);
if (ret)
return err;
if (down_read_trylock(&oi->ip_alloc_sem) == 0) {
ocfs2_inode_unlock(inode, 0);
return err;
}
/*
* Don't bother with inline-data. There isn't anything
* to read-ahead in that case anyway...
*/
if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
goto out_unlock;
/*
* Check whether a remote node truncated this file - we just
* drop out in that case as it's not worth handling here.
*/
last = lru_to_page(pages);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
start = (loff_t)last->index << PAGE_SHIFT;
if (start >= i_size_read(inode))
goto out_unlock;
err = mpage_readpages(mapping, pages, nr_pages, ocfs2_get_block);
out_unlock:
up_read(&oi->ip_alloc_sem);
ocfs2_inode_unlock(inode, 0);
return err;
}
/* Note: Because we don't support holes, our allocation has
* already happened (allocation writes zeros to the file data)
* so we don't have to worry about ordered writes in
* ocfs2_writepage.
*
* ->writepage is called during the process of invalidating the page cache
* during blocked lock processing. It can't block on any cluster locks
* to during block mapping. It's relying on the fact that the block
* mapping can't have disappeared under the dirty pages that it is
* being asked to write back.
*/
static int ocfs2_writepage(struct page *page, struct writeback_control *wbc)
{
trace_ocfs2_writepage(
(unsigned long long)OCFS2_I(page->mapping->host)->ip_blkno,
page->index);
return block_write_full_page(page, ocfs2_get_block, wbc);
}
/* Taken from ext3. We don't necessarily need the full blown
* functionality yet, but IMHO it's better to cut and paste the whole
* thing so we can avoid introducing our own bugs (and easily pick up
* their fixes when they happen) --Mark */
int walk_page_buffers( handle_t *handle,
struct buffer_head *head,
unsigned from,
unsigned to,
int *partial,
int (*fn)( handle_t *handle,
struct buffer_head *bh))
{
struct buffer_head *bh;
unsigned block_start, block_end;
unsigned blocksize = head->b_size;
int err, ret = 0;
struct buffer_head *next;
for ( bh = head, block_start = 0;
ret == 0 && (bh != head || !block_start);
block_start = block_end, bh = next)
{
next = bh->b_this_page;
block_end = block_start + blocksize;
if (block_end <= from || block_start >= to) {
if (partial && !buffer_uptodate(bh))
*partial = 1;
continue;
}
err = (*fn)(handle, bh);
if (!ret)
ret = err;
}
return ret;
}
static sector_t ocfs2_bmap(struct address_space *mapping, sector_t block)
{
sector_t status;
u64 p_blkno = 0;
int err = 0;
struct inode *inode = mapping->host;
trace_ocfs2_bmap((unsigned long long)OCFS2_I(inode)->ip_blkno,
(unsigned long long)block);
/*
* The swap code (ab-)uses ->bmap to get a block mapping and then
* bypasseѕ the file system for actual I/O. We really can't allow
* that on refcounted inodes, so we have to skip out here. And yes,
* 0 is the magic code for a bmap error..
*/
if (ocfs2_is_refcount_inode(inode))
return 0;
/* We don't need to lock journal system files, since they aren't
* accessed concurrently from multiple nodes.
*/
if (!INODE_JOURNAL(inode)) {
err = ocfs2_inode_lock(inode, NULL, 0);
if (err) {
if (err != -ENOENT)
mlog_errno(err);
goto bail;
}
down_read(&OCFS2_I(inode)->ip_alloc_sem);
}
if (!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL))
err = ocfs2_extent_map_get_blocks(inode, block, &p_blkno, NULL,
NULL);
if (!INODE_JOURNAL(inode)) {
up_read(&OCFS2_I(inode)->ip_alloc_sem);
ocfs2_inode_unlock(inode, 0);
}
if (err) {
mlog(ML_ERROR, "get_blocks() failed, block = %llu\n",
(unsigned long long)block);
mlog_errno(err);
goto bail;
}
bail:
status = err ? 0 : p_blkno;
return status;
}
static int ocfs2_releasepage(struct page *page, gfp_t wait)
{
if (!page_has_buffers(page))
return 0;
return try_to_free_buffers(page);
}
static void ocfs2_figure_cluster_boundaries(struct ocfs2_super *osb,
u32 cpos,
unsigned int *start,
unsigned int *end)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
unsigned int cluster_start = 0, cluster_end = PAGE_SIZE;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
if (unlikely(PAGE_SHIFT > osb->s_clustersize_bits)) {
unsigned int cpp;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
cpp = 1 << (PAGE_SHIFT - osb->s_clustersize_bits);
cluster_start = cpos % cpp;
cluster_start = cluster_start << osb->s_clustersize_bits;
cluster_end = cluster_start + osb->s_clustersize;
}
BUG_ON(cluster_start > PAGE_SIZE);
BUG_ON(cluster_end > PAGE_SIZE);
if (start)
*start = cluster_start;
if (end)
*end = cluster_end;
}
/*
* 'from' and 'to' are the region in the page to avoid zeroing.
*
* If pagesize > clustersize, this function will avoid zeroing outside
* of the cluster boundary.
*
* from == to == 0 is code for "zero the entire cluster region"
*/
static void ocfs2_clear_page_regions(struct page *page,
struct ocfs2_super *osb, u32 cpos,
unsigned from, unsigned to)
{
void *kaddr;
unsigned int cluster_start, cluster_end;
ocfs2_figure_cluster_boundaries(osb, cpos, &cluster_start, &cluster_end);
kaddr = kmap_atomic(page);
if (from || to) {
if (from > cluster_start)
memset(kaddr + cluster_start, 0, from - cluster_start);
if (to < cluster_end)
memset(kaddr + to, 0, cluster_end - to);
} else {
memset(kaddr + cluster_start, 0, cluster_end - cluster_start);
}
kunmap_atomic(kaddr);
}
/*
* Nonsparse file systems fully allocate before we get to the write
* code. This prevents ocfs2_write() from tagging the write as an
* allocating one, which means ocfs2_map_page_blocks() might try to
* read-in the blocks at the tail of our file. Avoid reading them by
* testing i_size against each block offset.
*/
static int ocfs2_should_read_blk(struct inode *inode, struct page *page,
unsigned int block_start)
{
u64 offset = page_offset(page) + block_start;
if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
return 1;
if (i_size_read(inode) > offset)
return 1;
return 0;
}
/*
* Some of this taken from __block_write_begin(). We already have our
* mapping by now though, and the entire write will be allocating or
* it won't, so not much need to use BH_New.
*
* This will also skip zeroing, which is handled externally.
*/
int ocfs2_map_page_blocks(struct page *page, u64 *p_blkno,
struct inode *inode, unsigned int from,
unsigned int to, int new)
{
int ret = 0;
struct buffer_head *head, *bh, *wait[2], **wait_bh = wait;
unsigned int block_end, block_start;
unsigned int bsize = i_blocksize(inode);
if (!page_has_buffers(page))
create_empty_buffers(page, bsize, 0);
head = page_buffers(page);
for (bh = head, block_start = 0; bh != head || !block_start;
bh = bh->b_this_page, block_start += bsize) {
block_end = block_start + bsize;
clear_buffer_new(bh);
/*
* Ignore blocks outside of our i/o range -
* they may belong to unallocated clusters.
*/
if (block_start >= to || block_end <= from) {
if (PageUptodate(page))
set_buffer_uptodate(bh);
continue;
}
/*
* For an allocating write with cluster size >= page
* size, we always write the entire page.
*/
if (new)
set_buffer_new(bh);
if (!buffer_mapped(bh)) {
map_bh(bh, inode->i_sb, *p_blkno);
clean_bdev_bh_alias(bh);
}
if (PageUptodate(page)) {
if (!buffer_uptodate(bh))
set_buffer_uptodate(bh);
} else if (!buffer_uptodate(bh) && !buffer_delay(bh) &&
!buffer_new(bh) &&
ocfs2_should_read_blk(inode, page, block_start) &&
(block_start < from || block_end > to)) {
ll_rw_block(REQ_OP_READ, 0, 1, &bh);
*wait_bh++=bh;
}
*p_blkno = *p_blkno + 1;
}
/*
* If we issued read requests - let them complete.
*/
while(wait_bh > wait) {
wait_on_buffer(*--wait_bh);
if (!buffer_uptodate(*wait_bh))
ret = -EIO;
}
if (ret == 0 || !new)
return ret;
/*
* If we get -EIO above, zero out any newly allocated blocks
* to avoid exposing stale data.
*/
bh = head;
block_start = 0;
do {
block_end = block_start + bsize;
if (block_end <= from)
goto next_bh;
if (block_start >= to)
break;
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:29 +08:00
zero_user(page, block_start, bh->b_size);
set_buffer_uptodate(bh);
mark_buffer_dirty(bh);
next_bh:
block_start = block_end;
bh = bh->b_this_page;
} while (bh != head);
return ret;
}
#if (PAGE_SIZE >= OCFS2_MAX_CLUSTERSIZE)
#define OCFS2_MAX_CTXT_PAGES 1
#else
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
#define OCFS2_MAX_CTXT_PAGES (OCFS2_MAX_CLUSTERSIZE / PAGE_SIZE)
#endif
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
#define OCFS2_MAX_CLUSTERS_PER_PAGE (PAGE_SIZE / OCFS2_MIN_CLUSTERSIZE)
struct ocfs2_unwritten_extent {
struct list_head ue_node;
struct list_head ue_ip_node;
u32 ue_cpos;
u32 ue_phys;
};
/*
* Describe the state of a single cluster to be written to.
*/
struct ocfs2_write_cluster_desc {
u32 c_cpos;
u32 c_phys;
/*
* Give this a unique field because c_phys eventually gets
* filled.
*/
unsigned c_new;
unsigned c_clear_unwritten;
unsigned c_needs_zero;
};
struct ocfs2_write_ctxt {
/* Logical cluster position / len of write */
u32 w_cpos;
u32 w_clen;
/* First cluster allocated in a nonsparse extend */
u32 w_first_new_cpos;
/* Type of caller. Must be one of buffer, mmap, direct. */
ocfs2_write_type_t w_type;
struct ocfs2_write_cluster_desc w_desc[OCFS2_MAX_CLUSTERS_PER_PAGE];
/*
* This is true if page_size > cluster_size.
*
* It triggers a set of special cases during write which might
* have to deal with allocating writes to partial pages.
*/
unsigned int w_large_pages;
/*
* Pages involved in this write.
*
* w_target_page is the page being written to by the user.
*
* w_pages is an array of pages which always contains
* w_target_page, and in the case of an allocating write with
* page_size < cluster size, it will contain zero'd and mapped
* pages adjacent to w_target_page which need to be written
* out in so that future reads from that region will get
* zero's.
*/
unsigned int w_num_pages;
struct page *w_pages[OCFS2_MAX_CTXT_PAGES];
struct page *w_target_page;
/*
* w_target_locked is used for page_mkwrite path indicating no unlocking
* against w_target_page in ocfs2_write_end_nolock.
*/
unsigned int w_target_locked:1;
/*
* ocfs2_write_end() uses this to know what the real range to
* write in the target should be.
*/
unsigned int w_target_from;
unsigned int w_target_to;
/*
* We could use journal_current_handle() but this is cleaner,
* IMHO -Mark
*/
handle_t *w_handle;
struct buffer_head *w_di_bh;
struct ocfs2_cached_dealloc_ctxt w_dealloc;
struct list_head w_unwritten_list;
unsigned int w_unwritten_count;
};
void ocfs2_unlock_and_free_pages(struct page **pages, int num_pages)
{
int i;
for(i = 0; i < num_pages; i++) {
if (pages[i]) {
unlock_page(pages[i]);
mark_page_accessed(pages[i]);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(pages[i]);
}
}
}
static void ocfs2_unlock_pages(struct ocfs2_write_ctxt *wc)
{
int i;
/*
* w_target_locked is only set to true in the page_mkwrite() case.
* The intent is to allow us to lock the target page from write_begin()
* to write_end(). The caller must hold a ref on w_target_page.
*/
if (wc->w_target_locked) {
BUG_ON(!wc->w_target_page);
for (i = 0; i < wc->w_num_pages; i++) {
if (wc->w_target_page == wc->w_pages[i]) {
wc->w_pages[i] = NULL;
break;
}
}
mark_page_accessed(wc->w_target_page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(wc->w_target_page);
}
ocfs2_unlock_and_free_pages(wc->w_pages, wc->w_num_pages);
}
static void ocfs2_free_unwritten_list(struct inode *inode,
struct list_head *head)
{
struct ocfs2_inode_info *oi = OCFS2_I(inode);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
struct ocfs2_unwritten_extent *ue = NULL, *tmp = NULL;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
list_for_each_entry_safe(ue, tmp, head, ue_node) {
list_del(&ue->ue_node);
spin_lock(&oi->ip_lock);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
list_del(&ue->ue_ip_node);
spin_unlock(&oi->ip_lock);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
kfree(ue);
}
}
static void ocfs2_free_write_ctxt(struct inode *inode,
struct ocfs2_write_ctxt *wc)
{
ocfs2_free_unwritten_list(inode, &wc->w_unwritten_list);
ocfs2_unlock_pages(wc);
brelse(wc->w_di_bh);
kfree(wc);
}
static int ocfs2_alloc_write_ctxt(struct ocfs2_write_ctxt **wcp,
struct ocfs2_super *osb, loff_t pos,
unsigned len, ocfs2_write_type_t type,
struct buffer_head *di_bh)
{
u32 cend;
struct ocfs2_write_ctxt *wc;
wc = kzalloc(sizeof(struct ocfs2_write_ctxt), GFP_NOFS);
if (!wc)
return -ENOMEM;
wc->w_cpos = pos >> osb->s_clustersize_bits;
wc->w_first_new_cpos = UINT_MAX;
cend = (pos + len - 1) >> osb->s_clustersize_bits;
wc->w_clen = cend - wc->w_cpos + 1;
get_bh(di_bh);
wc->w_di_bh = di_bh;
wc->w_type = type;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
if (unlikely(PAGE_SHIFT > osb->s_clustersize_bits))
wc->w_large_pages = 1;
else
wc->w_large_pages = 0;
ocfs2_init_dealloc_ctxt(&wc->w_dealloc);
INIT_LIST_HEAD(&wc->w_unwritten_list);
*wcp = wc;
return 0;
}
/*
* If a page has any new buffers, zero them out here, and mark them uptodate
* and dirty so they'll be written out (in order to prevent uninitialised
* block data from leaking). And clear the new bit.
*/
static void ocfs2_zero_new_buffers(struct page *page, unsigned from, unsigned to)
{
unsigned int block_start, block_end;
struct buffer_head *head, *bh;
BUG_ON(!PageLocked(page));
if (!page_has_buffers(page))
return;
bh = head = page_buffers(page);
block_start = 0;
do {
block_end = block_start + bh->b_size;
if (buffer_new(bh)) {
if (block_end > from && block_start < to) {
if (!PageUptodate(page)) {
unsigned start, end;
start = max(from, block_start);
end = min(to, block_end);
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:29 +08:00
zero_user_segment(page, start, end);
set_buffer_uptodate(bh);
}
clear_buffer_new(bh);
mark_buffer_dirty(bh);
}
}
block_start = block_end;
bh = bh->b_this_page;
} while (bh != head);
}
/*
* Only called when we have a failure during allocating write to write
* zero's to the newly allocated region.
*/
static void ocfs2_write_failure(struct inode *inode,
struct ocfs2_write_ctxt *wc,
loff_t user_pos, unsigned user_len)
{
int i;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
unsigned from = user_pos & (PAGE_SIZE - 1),
to = user_pos + user_len;
struct page *tmppage;
if (wc->w_target_page)
ocfs2_zero_new_buffers(wc->w_target_page, from, to);
for(i = 0; i < wc->w_num_pages; i++) {
tmppage = wc->w_pages[i];
if (tmppage && page_has_buffers(tmppage)) {
if (ocfs2_should_order_data(inode))
ocfs2_jbd2_inode_add_write(wc->w_handle, inode,
user_pos, user_len);
block_commit_write(tmppage, from, to);
}
}
}
static int ocfs2_prepare_page_for_write(struct inode *inode, u64 *p_blkno,
struct ocfs2_write_ctxt *wc,
struct page *page, u32 cpos,
loff_t user_pos, unsigned user_len,
int new)
{
int ret;
unsigned int map_from = 0, map_to = 0;
unsigned int cluster_start, cluster_end;
unsigned int user_data_from = 0, user_data_to = 0;
ocfs2_figure_cluster_boundaries(OCFS2_SB(inode->i_sb), cpos,
&cluster_start, &cluster_end);
/* treat the write as new if the a hole/lseek spanned across
* the page boundary.
*/
new = new | ((i_size_read(inode) <= page_offset(page)) &&
(page_offset(page) <= user_pos));
if (page == wc->w_target_page) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
map_from = user_pos & (PAGE_SIZE - 1);
map_to = map_from + user_len;
if (new)
ret = ocfs2_map_page_blocks(page, p_blkno, inode,
cluster_start, cluster_end,
new);
else
ret = ocfs2_map_page_blocks(page, p_blkno, inode,
map_from, map_to, new);
if (ret) {
mlog_errno(ret);
goto out;
}
user_data_from = map_from;
user_data_to = map_to;
if (new) {
map_from = cluster_start;
map_to = cluster_end;
}
} else {
/*
* If we haven't allocated the new page yet, we
* shouldn't be writing it out without copying user
* data. This is likely a math error from the caller.
*/
BUG_ON(!new);
map_from = cluster_start;
map_to = cluster_end;
ret = ocfs2_map_page_blocks(page, p_blkno, inode,
cluster_start, cluster_end, new);
if (ret) {
mlog_errno(ret);
goto out;
}
}
/*
* Parts of newly allocated pages need to be zero'd.
*
* Above, we have also rewritten 'to' and 'from' - as far as
* the rest of the function is concerned, the entire cluster
* range inside of a page needs to be written.
*
* We can skip this if the page is up to date - it's already
* been zero'd from being read in as a hole.
*/
if (new && !PageUptodate(page))
ocfs2_clear_page_regions(page, OCFS2_SB(inode->i_sb),
cpos, user_data_from, user_data_to);
flush_dcache_page(page);
out:
return ret;
}
/*
* This function will only grab one clusters worth of pages.
*/
static int ocfs2_grab_pages_for_write(struct address_space *mapping,
struct ocfs2_write_ctxt *wc,
u32 cpos, loff_t user_pos,
unsigned user_len, int new,
struct page *mmap_page)
{
int ret = 0, i;
unsigned long start, target_index, end_index, index;
struct inode *inode = mapping->host;
loff_t last_byte;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
target_index = user_pos >> PAGE_SHIFT;
/*
* Figure out how many pages we'll be manipulating here. For
* non allocating write, we just change the one
* page. Otherwise, we'll need a whole clusters worth. If we're
* writing past i_size, we only need enough pages to cover the
* last page of the write.
*/
if (new) {
wc->w_num_pages = ocfs2_pages_per_cluster(inode->i_sb);
start = ocfs2_align_clusters_to_page_index(inode->i_sb, cpos);
/*
* We need the index *past* the last page we could possibly
* touch. This is the page past the end of the write or
* i_size, whichever is greater.
*/
last_byte = max(user_pos + user_len, i_size_read(inode));
BUG_ON(last_byte < 1);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
end_index = ((last_byte - 1) >> PAGE_SHIFT) + 1;
if ((start + wc->w_num_pages) > end_index)
wc->w_num_pages = end_index - start;
} else {
wc->w_num_pages = 1;
start = target_index;
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
end_index = (user_pos + user_len - 1) >> PAGE_SHIFT;
for(i = 0; i < wc->w_num_pages; i++) {
index = start + i;
if (index >= target_index && index <= end_index &&
wc->w_type == OCFS2_WRITE_MMAP) {
/*
* ocfs2_pagemkwrite() is a little different
* and wants us to directly use the page
* passed in.
*/
lock_page(mmap_page);
/* Exit and let the caller retry */
if (mmap_page->mapping != mapping) {
WARN_ON(mmap_page->mapping);
unlock_page(mmap_page);
ret = -EAGAIN;
goto out;
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
get_page(mmap_page);
wc->w_pages[i] = mmap_page;
wc->w_target_locked = true;
} else if (index >= target_index && index <= end_index &&
wc->w_type == OCFS2_WRITE_DIRECT) {
/* Direct write has no mapping page. */
wc->w_pages[i] = NULL;
continue;
} else {
wc->w_pages[i] = find_or_create_page(mapping, index,
GFP_NOFS);
if (!wc->w_pages[i]) {
ret = -ENOMEM;
mlog_errno(ret);
goto out;
}
}
wait_for_stable_page(wc->w_pages[i]);
if (index == target_index)
wc->w_target_page = wc->w_pages[i];
}
out:
if (ret)
wc->w_target_locked = false;
return ret;
}
/*
* Prepare a single cluster for write one cluster into the file.
*/
static int ocfs2_write_cluster(struct address_space *mapping,
u32 *phys, unsigned int new,
unsigned int clear_unwritten,
unsigned int should_zero,
struct ocfs2_alloc_context *data_ac,
struct ocfs2_alloc_context *meta_ac,
struct ocfs2_write_ctxt *wc, u32 cpos,
loff_t user_pos, unsigned user_len)
{
int ret, i;
u64 p_blkno;
struct inode *inode = mapping->host;
struct ocfs2_extent_tree et;
int bpc = ocfs2_clusters_to_blocks(inode->i_sb, 1);
if (new) {
u32 tmp_pos;
/*
* This is safe to call with the page locks - it won't take
* any additional semaphores or cluster locks.
*/
tmp_pos = cpos;
ret = ocfs2_add_inode_data(OCFS2_SB(inode->i_sb), inode,
&tmp_pos, 1, !clear_unwritten,
wc->w_di_bh, wc->w_handle,
data_ac, meta_ac, NULL);
/*
* This shouldn't happen because we must have already
* calculated the correct meta data allocation required. The
* internal tree allocation code should know how to increase
* transaction credits itself.
*
* If need be, we could handle -EAGAIN for a
* RESTART_TRANS here.
*/
mlog_bug_on_msg(ret == -EAGAIN,
"Inode %llu: EAGAIN return during allocation.\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno);
if (ret < 0) {
mlog_errno(ret);
goto out;
}
} else if (clear_unwritten) {
ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode),
wc->w_di_bh);
ret = ocfs2_mark_extent_written(inode, &et,
wc->w_handle, cpos, 1, *phys,
meta_ac, &wc->w_dealloc);
if (ret < 0) {
mlog_errno(ret);
goto out;
}
}
/*
* The only reason this should fail is due to an inability to
* find the extent added.
*/
ret = ocfs2_get_clusters(inode, cpos, phys, NULL, NULL);
if (ret < 0) {
mlog(ML_ERROR, "Get physical blkno failed for inode %llu, "
"at logical cluster %u",
(unsigned long long)OCFS2_I(inode)->ip_blkno, cpos);
goto out;
}
BUG_ON(*phys == 0);
p_blkno = ocfs2_clusters_to_blocks(inode->i_sb, *phys);
if (!should_zero)
p_blkno += (user_pos >> inode->i_sb->s_blocksize_bits) & (u64)(bpc - 1);
for(i = 0; i < wc->w_num_pages; i++) {
int tmpret;
/* This is the direct io target page. */
if (wc->w_pages[i] == NULL) {
p_blkno++;
continue;
}
tmpret = ocfs2_prepare_page_for_write(inode, &p_blkno, wc,
wc->w_pages[i], cpos,
user_pos, user_len,
should_zero);
if (tmpret) {
mlog_errno(tmpret);
if (ret == 0)
ret = tmpret;
}
}
/*
* We only have cleanup to do in case of allocating write.
*/
if (ret && new)
ocfs2_write_failure(inode, wc, user_pos, user_len);
out:
return ret;
}
static int ocfs2_write_cluster_by_desc(struct address_space *mapping,
struct ocfs2_alloc_context *data_ac,
struct ocfs2_alloc_context *meta_ac,
struct ocfs2_write_ctxt *wc,
loff_t pos, unsigned len)
{
int ret, i;
loff_t cluster_off;
unsigned int local_len = len;
struct ocfs2_write_cluster_desc *desc;
struct ocfs2_super *osb = OCFS2_SB(mapping->host->i_sb);
for (i = 0; i < wc->w_clen; i++) {
desc = &wc->w_desc[i];
/*
* We have to make sure that the total write passed in
* doesn't extend past a single cluster.
*/
local_len = len;
cluster_off = pos & (osb->s_clustersize - 1);
if ((cluster_off + local_len) > osb->s_clustersize)
local_len = osb->s_clustersize - cluster_off;
ret = ocfs2_write_cluster(mapping, &desc->c_phys,
desc->c_new,
desc->c_clear_unwritten,
desc->c_needs_zero,
data_ac, meta_ac,
wc, desc->c_cpos, pos, local_len);
if (ret) {
mlog_errno(ret);
goto out;
}
len -= local_len;
pos += local_len;
}
ret = 0;
out:
return ret;
}
/*
* ocfs2_write_end() wants to know which parts of the target page it
* should complete the write on. It's easiest to compute them ahead of
* time when a more complete view of the write is available.
*/
static void ocfs2_set_target_boundaries(struct ocfs2_super *osb,
struct ocfs2_write_ctxt *wc,
loff_t pos, unsigned len, int alloc)
{
struct ocfs2_write_cluster_desc *desc;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
wc->w_target_from = pos & (PAGE_SIZE - 1);
wc->w_target_to = wc->w_target_from + len;
if (alloc == 0)
return;
/*
* Allocating write - we may have different boundaries based
* on page size and cluster size.
*
* NOTE: We can no longer compute one value from the other as
* the actual write length and user provided length may be
* different.
*/
if (wc->w_large_pages) {
/*
* We only care about the 1st and last cluster within
* our range and whether they should be zero'd or not. Either
* value may be extended out to the start/end of a
* newly allocated cluster.
*/
desc = &wc->w_desc[0];
if (desc->c_needs_zero)
ocfs2_figure_cluster_boundaries(osb,
desc->c_cpos,
&wc->w_target_from,
NULL);
desc = &wc->w_desc[wc->w_clen - 1];
if (desc->c_needs_zero)
ocfs2_figure_cluster_boundaries(osb,
desc->c_cpos,
NULL,
&wc->w_target_to);
} else {
wc->w_target_from = 0;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
wc->w_target_to = PAGE_SIZE;
}
}
/*
* Check if this extent is marked UNWRITTEN by direct io. If so, we need not to
* do the zero work. And should not to clear UNWRITTEN since it will be cleared
* by the direct io procedure.
* If this is a new extent that allocated by direct io, we should mark it in
* the ip_unwritten_list.
*/
static int ocfs2_unwritten_check(struct inode *inode,
struct ocfs2_write_ctxt *wc,
struct ocfs2_write_cluster_desc *desc)
{
struct ocfs2_inode_info *oi = OCFS2_I(inode);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
struct ocfs2_unwritten_extent *ue = NULL, *new = NULL;
int ret = 0;
if (!desc->c_needs_zero)
return 0;
retry:
spin_lock(&oi->ip_lock);
/* Needs not to zero no metter buffer or direct. The one who is zero
* the cluster is doing zero. And he will clear unwritten after all
* cluster io finished. */
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
list_for_each_entry(ue, &oi->ip_unwritten_list, ue_ip_node) {
if (desc->c_cpos == ue->ue_cpos) {
BUG_ON(desc->c_new);
desc->c_needs_zero = 0;
desc->c_clear_unwritten = 0;
goto unlock;
}
}
if (wc->w_type != OCFS2_WRITE_DIRECT)
goto unlock;
if (new == NULL) {
spin_unlock(&oi->ip_lock);
new = kmalloc(sizeof(struct ocfs2_unwritten_extent),
GFP_NOFS);
if (new == NULL) {
ret = -ENOMEM;
goto out;
}
goto retry;
}
/* This direct write will doing zero. */
new->ue_cpos = desc->c_cpos;
new->ue_phys = desc->c_phys;
desc->c_clear_unwritten = 0;
list_add_tail(&new->ue_ip_node, &oi->ip_unwritten_list);
list_add_tail(&new->ue_node, &wc->w_unwritten_list);
wc->w_unwritten_count++;
new = NULL;
unlock:
spin_unlock(&oi->ip_lock);
out:
kfree(new);
return ret;
}
/*
* Populate each single-cluster write descriptor in the write context
* with information about the i/o to be done.
*
* Returns the number of clusters that will have to be allocated, as
* well as a worst case estimate of the number of extent records that
* would have to be created during a write to an unwritten region.
*/
static int ocfs2_populate_write_desc(struct inode *inode,
struct ocfs2_write_ctxt *wc,
unsigned int *clusters_to_alloc,
unsigned int *extents_to_split)
{
int ret;
struct ocfs2_write_cluster_desc *desc;
unsigned int num_clusters = 0;
unsigned int ext_flags = 0;
u32 phys = 0;
int i;
*clusters_to_alloc = 0;
*extents_to_split = 0;
for (i = 0; i < wc->w_clen; i++) {
desc = &wc->w_desc[i];
desc->c_cpos = wc->w_cpos + i;
if (num_clusters == 0) {
/*
* Need to look up the next extent record.
*/
ret = ocfs2_get_clusters(inode, desc->c_cpos, &phys,
&num_clusters, &ext_flags);
if (ret) {
mlog_errno(ret);
goto out;
}
/* We should already CoW the refcountd extent. */
BUG_ON(ext_flags & OCFS2_EXT_REFCOUNTED);
/*
* Assume worst case - that we're writing in
* the middle of the extent.
*
* We can assume that the write proceeds from
* left to right, in which case the extent
* insert code is smart enough to coalesce the
* next splits into the previous records created.
*/
if (ext_flags & OCFS2_EXT_UNWRITTEN)
*extents_to_split = *extents_to_split + 2;
} else if (phys) {
/*
* Only increment phys if it doesn't describe
* a hole.
*/
phys++;
}
/*
* If w_first_new_cpos is < UINT_MAX, we have a non-sparse
* file that got extended. w_first_new_cpos tells us
* where the newly allocated clusters are so we can
* zero them.
*/
if (desc->c_cpos >= wc->w_first_new_cpos) {
BUG_ON(phys == 0);
desc->c_needs_zero = 1;
}
desc->c_phys = phys;
if (phys == 0) {
desc->c_new = 1;
desc->c_needs_zero = 1;
desc->c_clear_unwritten = 1;
*clusters_to_alloc = *clusters_to_alloc + 1;
}
if (ext_flags & OCFS2_EXT_UNWRITTEN) {
desc->c_clear_unwritten = 1;
desc->c_needs_zero = 1;
}
ret = ocfs2_unwritten_check(inode, wc, desc);
if (ret) {
mlog_errno(ret);
goto out;
}
num_clusters--;
}
ret = 0;
out:
return ret;
}
static int ocfs2_write_begin_inline(struct address_space *mapping,
struct inode *inode,
struct ocfs2_write_ctxt *wc)
{
int ret;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct page *page;
handle_t *handle;
struct ocfs2_dinode *di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
ocfs2: fix deadlock due to wrong locking order For commit ocfs2 journal, ocfs2 journal thread will acquire the mutex osb->journal->j_trans_barrier and wake up jbd2 commit thread, then it will wait until jbd2 commit thread done. In order journal mode, jbd2 needs flushing dirty data pages first, and this needs get page lock. So osb->journal->j_trans_barrier should be got before page lock. But ocfs2_write_zero_page() and ocfs2_write_begin_inline() obey this locking order, and this will cause deadlock and hung the whole cluster. One deadlock catched is the following: PID: 13449 TASK: ffff8802e2f08180 CPU: 31 COMMAND: "oracle" #0 [ffff8802ee3f79b0] __schedule at ffffffff8150a524 #1 [ffff8802ee3f7a58] schedule at ffffffff8150acbf #2 [ffff8802ee3f7a68] rwsem_down_failed_common at ffffffff8150cb85 #3 [ffff8802ee3f7ad8] rwsem_down_read_failed at ffffffff8150cc55 #4 [ffff8802ee3f7ae8] call_rwsem_down_read_failed at ffffffff812617a4 #5 [ffff8802ee3f7b50] ocfs2_start_trans at ffffffffa0498919 [ocfs2] #6 [ffff8802ee3f7ba0] ocfs2_zero_start_ordered_transaction at ffffffffa048b2b8 [ocfs2] #7 [ffff8802ee3f7bf0] ocfs2_write_zero_page at ffffffffa048e9bd [ocfs2] #8 [ffff8802ee3f7c80] ocfs2_zero_extend_range at ffffffffa048ec83 [ocfs2] #9 [ffff8802ee3f7ce0] ocfs2_zero_extend at ffffffffa048edfd [ocfs2] #10 [ffff8802ee3f7d50] ocfs2_extend_file at ffffffffa049079e [ocfs2] #11 [ffff8802ee3f7da0] ocfs2_setattr at ffffffffa04910ed [ocfs2] #12 [ffff8802ee3f7e70] notify_change at ffffffff81187d29 #13 [ffff8802ee3f7ee0] do_truncate at ffffffff8116bbc1 #14 [ffff8802ee3f7f50] sys_ftruncate at ffffffff8116bcbd #15 [ffff8802ee3f7f80] system_call_fastpath at ffffffff81515142 RIP: 00007f8de750c6f7 RSP: 00007fffe786e478 RFLAGS: 00000206 RAX: 000000000000004d RBX: ffffffff81515142 RCX: 0000000000000000 RDX: 0000000000000200 RSI: 0000000000028400 RDI: 000000000000000d RBP: 00007fffe786e040 R8: 0000000000000000 R9: 000000000000000d R10: 0000000000000000 R11: 0000000000000206 R12: 000000000000000d R13: 00007fffe786e710 R14: 00007f8de70f8340 R15: 0000000000028400 ORIG_RAX: 000000000000004d CS: 0033 SS: 002b crash64> bt PID: 7610 TASK: ffff88100fd56140 CPU: 1 COMMAND: "ocfs2cmt" #0 [ffff88100f4d1c50] __schedule at ffffffff8150a524 #1 [ffff88100f4d1cf8] schedule at ffffffff8150acbf #2 [ffff88100f4d1d08] jbd2_log_wait_commit at ffffffffa01274fd [jbd2] #3 [ffff88100f4d1d98] jbd2_journal_flush at ffffffffa01280b4 [jbd2] #4 [ffff88100f4d1dd8] ocfs2_commit_cache at ffffffffa0499b14 [ocfs2] #5 [ffff88100f4d1e38] ocfs2_commit_thread at ffffffffa0499d38 [ocfs2] #6 [ffff88100f4d1ee8] kthread at ffffffff81090db6 #7 [ffff88100f4d1f48] kernel_thread_helper at ffffffff81516284 crash64> bt PID: 7609 TASK: ffff88100f2d4480 CPU: 0 COMMAND: "jbd2/dm-20-86" #0 [ffff88100def3920] __schedule at ffffffff8150a524 #1 [ffff88100def39c8] schedule at ffffffff8150acbf #2 [ffff88100def39d8] io_schedule at ffffffff8150ad6c #3 [ffff88100def39f8] sleep_on_page at ffffffff8111069e #4 [ffff88100def3a08] __wait_on_bit_lock at ffffffff8150b30a #5 [ffff88100def3a58] __lock_page at ffffffff81110687 #6 [ffff88100def3ab8] write_cache_pages at ffffffff8111b752 #7 [ffff88100def3be8] generic_writepages at ffffffff8111b901 #8 [ffff88100def3c48] journal_submit_data_buffers at ffffffffa0120f67 [jbd2] #9 [ffff88100def3cf8] jbd2_journal_commit_transaction at ffffffffa0121372[jbd2] #10 [ffff88100def3e68] kjournald2 at ffffffffa0127a86 [jbd2] #11 [ffff88100def3ee8] kthread at ffffffff81090db6 #12 [ffff88100def3f48] kernel_thread_helper at ffffffff81516284 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Alex Chen <alex.chen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:25:15 +08:00
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
mlog_errno(ret);
goto out;
}
page = find_or_create_page(mapping, 0, GFP_NOFS);
if (!page) {
ocfs2: fix deadlock due to wrong locking order For commit ocfs2 journal, ocfs2 journal thread will acquire the mutex osb->journal->j_trans_barrier and wake up jbd2 commit thread, then it will wait until jbd2 commit thread done. In order journal mode, jbd2 needs flushing dirty data pages first, and this needs get page lock. So osb->journal->j_trans_barrier should be got before page lock. But ocfs2_write_zero_page() and ocfs2_write_begin_inline() obey this locking order, and this will cause deadlock and hung the whole cluster. One deadlock catched is the following: PID: 13449 TASK: ffff8802e2f08180 CPU: 31 COMMAND: "oracle" #0 [ffff8802ee3f79b0] __schedule at ffffffff8150a524 #1 [ffff8802ee3f7a58] schedule at ffffffff8150acbf #2 [ffff8802ee3f7a68] rwsem_down_failed_common at ffffffff8150cb85 #3 [ffff8802ee3f7ad8] rwsem_down_read_failed at ffffffff8150cc55 #4 [ffff8802ee3f7ae8] call_rwsem_down_read_failed at ffffffff812617a4 #5 [ffff8802ee3f7b50] ocfs2_start_trans at ffffffffa0498919 [ocfs2] #6 [ffff8802ee3f7ba0] ocfs2_zero_start_ordered_transaction at ffffffffa048b2b8 [ocfs2] #7 [ffff8802ee3f7bf0] ocfs2_write_zero_page at ffffffffa048e9bd [ocfs2] #8 [ffff8802ee3f7c80] ocfs2_zero_extend_range at ffffffffa048ec83 [ocfs2] #9 [ffff8802ee3f7ce0] ocfs2_zero_extend at ffffffffa048edfd [ocfs2] #10 [ffff8802ee3f7d50] ocfs2_extend_file at ffffffffa049079e [ocfs2] #11 [ffff8802ee3f7da0] ocfs2_setattr at ffffffffa04910ed [ocfs2] #12 [ffff8802ee3f7e70] notify_change at ffffffff81187d29 #13 [ffff8802ee3f7ee0] do_truncate at ffffffff8116bbc1 #14 [ffff8802ee3f7f50] sys_ftruncate at ffffffff8116bcbd #15 [ffff8802ee3f7f80] system_call_fastpath at ffffffff81515142 RIP: 00007f8de750c6f7 RSP: 00007fffe786e478 RFLAGS: 00000206 RAX: 000000000000004d RBX: ffffffff81515142 RCX: 0000000000000000 RDX: 0000000000000200 RSI: 0000000000028400 RDI: 000000000000000d RBP: 00007fffe786e040 R8: 0000000000000000 R9: 000000000000000d R10: 0000000000000000 R11: 0000000000000206 R12: 000000000000000d R13: 00007fffe786e710 R14: 00007f8de70f8340 R15: 0000000000028400 ORIG_RAX: 000000000000004d CS: 0033 SS: 002b crash64> bt PID: 7610 TASK: ffff88100fd56140 CPU: 1 COMMAND: "ocfs2cmt" #0 [ffff88100f4d1c50] __schedule at ffffffff8150a524 #1 [ffff88100f4d1cf8] schedule at ffffffff8150acbf #2 [ffff88100f4d1d08] jbd2_log_wait_commit at ffffffffa01274fd [jbd2] #3 [ffff88100f4d1d98] jbd2_journal_flush at ffffffffa01280b4 [jbd2] #4 [ffff88100f4d1dd8] ocfs2_commit_cache at ffffffffa0499b14 [ocfs2] #5 [ffff88100f4d1e38] ocfs2_commit_thread at ffffffffa0499d38 [ocfs2] #6 [ffff88100f4d1ee8] kthread at ffffffff81090db6 #7 [ffff88100f4d1f48] kernel_thread_helper at ffffffff81516284 crash64> bt PID: 7609 TASK: ffff88100f2d4480 CPU: 0 COMMAND: "jbd2/dm-20-86" #0 [ffff88100def3920] __schedule at ffffffff8150a524 #1 [ffff88100def39c8] schedule at ffffffff8150acbf #2 [ffff88100def39d8] io_schedule at ffffffff8150ad6c #3 [ffff88100def39f8] sleep_on_page at ffffffff8111069e #4 [ffff88100def3a08] __wait_on_bit_lock at ffffffff8150b30a #5 [ffff88100def3a58] __lock_page at ffffffff81110687 #6 [ffff88100def3ab8] write_cache_pages at ffffffff8111b752 #7 [ffff88100def3be8] generic_writepages at ffffffff8111b901 #8 [ffff88100def3c48] journal_submit_data_buffers at ffffffffa0120f67 [jbd2] #9 [ffff88100def3cf8] jbd2_journal_commit_transaction at ffffffffa0121372[jbd2] #10 [ffff88100def3e68] kjournald2 at ffffffffa0127a86 [jbd2] #11 [ffff88100def3ee8] kthread at ffffffff81090db6 #12 [ffff88100def3f48] kernel_thread_helper at ffffffff81516284 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Alex Chen <alex.chen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:25:15 +08:00
ocfs2_commit_trans(osb, handle);
ret = -ENOMEM;
mlog_errno(ret);
goto out;
}
/*
* If we don't set w_num_pages then this page won't get unlocked
* and freed on cleanup of the write context.
*/
wc->w_pages[0] = wc->w_target_page = page;
wc->w_num_pages = 1;
ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), wc->w_di_bh,
OCFS2_JOURNAL_ACCESS_WRITE);
if (ret) {
ocfs2_commit_trans(osb, handle);
mlog_errno(ret);
goto out;
}
if (!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL))
ocfs2_set_inode_data_inline(inode, di);
if (!PageUptodate(page)) {
ret = ocfs2_read_inline_data(inode, page, wc->w_di_bh);
if (ret) {
ocfs2_commit_trans(osb, handle);
goto out;
}
}
wc->w_handle = handle;
out:
return ret;
}
int ocfs2_size_fits_inline_data(struct buffer_head *di_bh, u64 new_size)
{
struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
if (new_size <= le16_to_cpu(di->id2.i_data.id_count))
return 1;
return 0;
}
static int ocfs2_try_to_write_inline_data(struct address_space *mapping,
struct inode *inode, loff_t pos,
unsigned len, struct page *mmap_page,
struct ocfs2_write_ctxt *wc)
{
int ret, written = 0;
loff_t end = pos + len;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
struct ocfs2_dinode *di = NULL;
trace_ocfs2_try_to_write_inline_data((unsigned long long)oi->ip_blkno,
len, (unsigned long long)pos,
oi->ip_dyn_features);
/*
* Handle inodes which already have inline data 1st.
*/
if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
if (mmap_page == NULL &&
ocfs2_size_fits_inline_data(wc->w_di_bh, end))
goto do_inline_write;
/*
* The write won't fit - we have to give this inode an
* inline extent list now.
*/
ret = ocfs2_convert_inline_data_to_extents(inode, wc->w_di_bh);
if (ret)
mlog_errno(ret);
goto out;
}
/*
* Check whether the inode can accept inline data.
*/
if (oi->ip_clusters != 0 || i_size_read(inode) != 0)
return 0;
/*
* Check whether the write can fit.
*/
di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
if (mmap_page ||
end > ocfs2_max_inline_data_with_xattr(inode->i_sb, di))
return 0;
do_inline_write:
ret = ocfs2_write_begin_inline(mapping, inode, wc);
if (ret) {
mlog_errno(ret);
goto out;
}
/*
* This signals to the caller that the data can be written
* inline.
*/
written = 1;
out:
return written ? written : ret;
}
/*
* This function only does anything for file systems which can't
* handle sparse files.
*
* What we want to do here is fill in any hole between the current end
* of allocation and the end of our write. That way the rest of the
* write path can treat it as an non-allocating write, which has no
* special case code for sparse/nonsparse files.
*/
ocfs2: Zero the tail cluster when extending past i_size. ocfs2's allocation unit is the cluster. This can be larger than a block or even a memory page. This means that a file may have many blocks in its last extent that are beyond the block containing i_size. There also may be more unwritten extents after that. When ocfs2 grows a file, it zeros the entire cluster in order to ensure future i_size growth will see cleared blocks. Unfortunately, block_write_full_page() drops the pages past i_size. This means that ocfs2 is actually leaking garbage data into the tail end of that last cluster. This is a bug. We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect when a write or truncate is past i_size. They will use ocfs2_zero_extend() to ensure the data is properly zeroed. Older versions of ocfs2_zero_extend() simply zeroed every block between i_size and the zeroing position. This presumes three things: 1) There is allocation for all of these blocks. 2) The extents are not unwritten. 3) The extents are not refcounted. (1) and (2) hold true for non-sparse filesystems, which used to be the only users of ocfs2_zero_extend(). (3) is another bug. Since we're now using ocfs2_zero_extend() for sparse filesystems as well, we teach ocfs2_zero_extend() to check every extent between i_size and the zeroing position. If the extent is unwritten, it is ignored. If it is refcounted, it is CoWed. Then it is zeroed. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-07-02 06:13:31 +08:00
static int ocfs2_expand_nonsparse_inode(struct inode *inode,
struct buffer_head *di_bh,
loff_t pos, unsigned len,
struct ocfs2_write_ctxt *wc)
{
int ret;
loff_t newsize = pos + len;
ocfs2: Zero the tail cluster when extending past i_size. ocfs2's allocation unit is the cluster. This can be larger than a block or even a memory page. This means that a file may have many blocks in its last extent that are beyond the block containing i_size. There also may be more unwritten extents after that. When ocfs2 grows a file, it zeros the entire cluster in order to ensure future i_size growth will see cleared blocks. Unfortunately, block_write_full_page() drops the pages past i_size. This means that ocfs2 is actually leaking garbage data into the tail end of that last cluster. This is a bug. We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect when a write or truncate is past i_size. They will use ocfs2_zero_extend() to ensure the data is properly zeroed. Older versions of ocfs2_zero_extend() simply zeroed every block between i_size and the zeroing position. This presumes three things: 1) There is allocation for all of these blocks. 2) The extents are not unwritten. 3) The extents are not refcounted. (1) and (2) hold true for non-sparse filesystems, which used to be the only users of ocfs2_zero_extend(). (3) is another bug. Since we're now using ocfs2_zero_extend() for sparse filesystems as well, we teach ocfs2_zero_extend() to check every extent between i_size and the zeroing position. If the extent is unwritten, it is ignored. If it is refcounted, it is CoWed. Then it is zeroed. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-07-02 06:13:31 +08:00
BUG_ON(ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
if (newsize <= i_size_read(inode))
return 0;
ocfs2: Zero the tail cluster when extending past i_size. ocfs2's allocation unit is the cluster. This can be larger than a block or even a memory page. This means that a file may have many blocks in its last extent that are beyond the block containing i_size. There also may be more unwritten extents after that. When ocfs2 grows a file, it zeros the entire cluster in order to ensure future i_size growth will see cleared blocks. Unfortunately, block_write_full_page() drops the pages past i_size. This means that ocfs2 is actually leaking garbage data into the tail end of that last cluster. This is a bug. We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect when a write or truncate is past i_size. They will use ocfs2_zero_extend() to ensure the data is properly zeroed. Older versions of ocfs2_zero_extend() simply zeroed every block between i_size and the zeroing position. This presumes three things: 1) There is allocation for all of these blocks. 2) The extents are not unwritten. 3) The extents are not refcounted. (1) and (2) hold true for non-sparse filesystems, which used to be the only users of ocfs2_zero_extend(). (3) is another bug. Since we're now using ocfs2_zero_extend() for sparse filesystems as well, we teach ocfs2_zero_extend() to check every extent between i_size and the zeroing position. If the extent is unwritten, it is ignored. If it is refcounted, it is CoWed. Then it is zeroed. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-07-02 06:13:31 +08:00
ret = ocfs2_extend_no_holes(inode, di_bh, newsize, pos);
if (ret)
mlog_errno(ret);
/* There is no wc if this is call from direct. */
if (wc)
wc->w_first_new_cpos =
ocfs2_clusters_for_bytes(inode->i_sb, i_size_read(inode));
return ret;
}
ocfs2: Zero the tail cluster when extending past i_size. ocfs2's allocation unit is the cluster. This can be larger than a block or even a memory page. This means that a file may have many blocks in its last extent that are beyond the block containing i_size. There also may be more unwritten extents after that. When ocfs2 grows a file, it zeros the entire cluster in order to ensure future i_size growth will see cleared blocks. Unfortunately, block_write_full_page() drops the pages past i_size. This means that ocfs2 is actually leaking garbage data into the tail end of that last cluster. This is a bug. We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect when a write or truncate is past i_size. They will use ocfs2_zero_extend() to ensure the data is properly zeroed. Older versions of ocfs2_zero_extend() simply zeroed every block between i_size and the zeroing position. This presumes three things: 1) There is allocation for all of these blocks. 2) The extents are not unwritten. 3) The extents are not refcounted. (1) and (2) hold true for non-sparse filesystems, which used to be the only users of ocfs2_zero_extend(). (3) is another bug. Since we're now using ocfs2_zero_extend() for sparse filesystems as well, we teach ocfs2_zero_extend() to check every extent between i_size and the zeroing position. If the extent is unwritten, it is ignored. If it is refcounted, it is CoWed. Then it is zeroed. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-07-02 06:13:31 +08:00
static int ocfs2_zero_tail(struct inode *inode, struct buffer_head *di_bh,
loff_t pos)
{
int ret = 0;
BUG_ON(!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
if (pos > i_size_read(inode))
ret = ocfs2_zero_extend(inode, di_bh, pos);
return ret;
}
int ocfs2_write_begin_nolock(struct address_space *mapping,
loff_t pos, unsigned len, ocfs2_write_type_t type,
struct page **pagep, void **fsdata,
struct buffer_head *di_bh, struct page *mmap_page)
{
int ret, cluster_of_pages, credits = OCFS2_INODE_UPDATE_CREDITS;
unsigned int clusters_to_alloc, extents_to_split, clusters_need = 0;
struct ocfs2_write_ctxt *wc;
struct inode *inode = mapping->host;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct ocfs2_dinode *di;
struct ocfs2_alloc_context *data_ac = NULL;
struct ocfs2_alloc_context *meta_ac = NULL;
handle_t *handle;
struct ocfs2_extent_tree et;
int try_free = 1, ret1;
try_again:
ret = ocfs2_alloc_write_ctxt(&wc, osb, pos, len, type, di_bh);
if (ret) {
mlog_errno(ret);
return ret;
}
if (ocfs2_supports_inline_data(osb)) {
ret = ocfs2_try_to_write_inline_data(mapping, inode, pos, len,
mmap_page, wc);
if (ret == 1) {
ret = 0;
goto success;
}
if (ret < 0) {
mlog_errno(ret);
goto out;
}
}
/* Direct io change i_size late, should not zero tail here. */
if (type != OCFS2_WRITE_DIRECT) {
if (ocfs2_sparse_alloc(osb))
ret = ocfs2_zero_tail(inode, di_bh, pos);
else
ret = ocfs2_expand_nonsparse_inode(inode, di_bh, pos,
len, wc);
if (ret) {
mlog_errno(ret);
goto out;
}
}
ret = ocfs2_check_range_for_refcount(inode, pos, len);
if (ret < 0) {
mlog_errno(ret);
goto out;
} else if (ret == 1) {
clusters_need = wc->w_clen;
ret = ocfs2_refcount_cow(inode, di_bh,
wc->w_cpos, wc->w_clen, UINT_MAX);
if (ret) {
mlog_errno(ret);
goto out;
}
}
ret = ocfs2_populate_write_desc(inode, wc, &clusters_to_alloc,
&extents_to_split);
if (ret) {
mlog_errno(ret);
goto out;
}
clusters_need += clusters_to_alloc;
di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
trace_ocfs2_write_begin_nolock(
(unsigned long long)OCFS2_I(inode)->ip_blkno,
(long long)i_size_read(inode),
le32_to_cpu(di->i_clusters),
pos, len, type, mmap_page,
clusters_to_alloc, extents_to_split);
/*
* We set w_target_from, w_target_to here so that
* ocfs2_write_end() knows which range in the target page to
* write out. An allocation requires that we write the entire
* cluster range.
*/
if (clusters_to_alloc || extents_to_split) {
/*
* XXX: We are stretching the limits of
* ocfs2_lock_allocators(). It greatly over-estimates
* the work to be done.
*/
ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode),
wc->w_di_bh);
ret = ocfs2_lock_allocators(inode, &et,
clusters_to_alloc, extents_to_split,
&data_ac, &meta_ac);
if (ret) {
mlog_errno(ret);
goto out;
}
if (data_ac)
data_ac->ac_resv = &OCFS2_I(inode)->ip_la_data_resv;
credits = ocfs2_calc_extend_credits(inode->i_sb,
&di->id2.i_list);
} else if (type == OCFS2_WRITE_DIRECT)
/* direct write needs not to start trans if no extents alloc. */
goto success;
/*
* We have to zero sparse allocated clusters, unwritten extent clusters,
* and non-sparse clusters we just extended. For non-sparse writes,
* we know zeros will only be needed in the first and/or last cluster.
*/
if (wc->w_clen && (wc->w_desc[0].c_needs_zero ||
wc->w_desc[wc->w_clen - 1].c_needs_zero))
cluster_of_pages = 1;
else
cluster_of_pages = 0;
ocfs2_set_target_boundaries(osb, wc, pos, len, cluster_of_pages);
handle = ocfs2_start_trans(osb, credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
mlog_errno(ret);
goto out;
}
wc->w_handle = handle;
if (clusters_to_alloc) {
ret = dquot_alloc_space_nodirty(inode,
ocfs2_clusters_to_bytes(osb->sb, clusters_to_alloc));
if (ret)
goto out_commit;
}
ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock() 1: After we call ocfs2_journal_access_di() in ocfs2_write_begin(), jbd2_journal_restart() may also be called, in this function transaction A's t_updates-- and obtains a new transaction B. If jbd2_journal_commit_transaction() is happened to commit transaction A, when t_updates==0, it will continue to complete commit and unfile buffer. So when jbd2_journal_dirty_metadata(), the handle is pointed a new transaction B, and the buffer head's journal head is already freed, jh->b_transaction == NULL, jh->b_next_transaction == NULL, it returns EINVAL, So it triggers the BUG_ON(status). thread 1 jbd2 ocfs2_write_begin jbd2_journal_commit_transaction ocfs2_write_begin_nolock ocfs2_start_trans jbd2__journal_start(t_updates+1, transaction A) ocfs2_journal_access_di ocfs2_write_cluster_by_desc ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_extend_rotate_transaction jbd2_journal_restart (t_updates-1,transaction B) t_updates==0 __jbd2_journal_refile_buffer (jh->b_transaction = NULL) ocfs2_write_end ocfs2_write_end_nolock ocfs2_journal_dirty jbd2_journal_dirty_metadata(bug) ocfs2_commit_trans 2. In ext4, I found that: jbd2_journal_get_write_access() called by ext4_write_end. ext4_write_begin ext4_journal_start __ext4_journal_start_sb ext4_journal_check_start jbd2__journal_start ext4_write_end ext4_mark_inode_dirty ext4_reserve_inode_write ext4_journal_get_write_access jbd2_journal_get_write_access ext4_mark_iloc_dirty ext4_do_update_inode ext4_handle_dirty_metadata jbd2_journal_dirty_metadata 3. So I think we should put ocfs2_journal_access_di before ocfs2_journal_dirty in the ocfs2_write_end. and it works well after my modification. Signed-off-by: vicky <vicky.yangwenfang@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Zhangguanghui <zhang.guanghui@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 06:44:45 +08:00
ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), wc->w_di_bh,
OCFS2_JOURNAL_ACCESS_WRITE);
if (ret) {
mlog_errno(ret);
goto out_quota;
}
/*
* Fill our page array first. That way we've grabbed enough so
* that we can zero and flush if we error after adding the
* extent.
*/
ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos, len,
cluster_of_pages, mmap_page);
if (ret && ret != -EAGAIN) {
mlog_errno(ret);
goto out_quota;
}
/*
* ocfs2_grab_pages_for_write() returns -EAGAIN if it could not lock
* the target page. In this case, we exit with no error and no target
* page. This will trigger the caller, page_mkwrite(), to re-try
* the operation.
*/
if (ret == -EAGAIN) {
BUG_ON(wc->w_target_page);
ret = 0;
goto out_quota;
}
ret = ocfs2_write_cluster_by_desc(mapping, data_ac, meta_ac, wc, pos,
len);
if (ret) {
mlog_errno(ret);
goto out_quota;
}
if (data_ac)
ocfs2_free_alloc_context(data_ac);
if (meta_ac)
ocfs2_free_alloc_context(meta_ac);
success:
if (pagep)
*pagep = wc->w_target_page;
*fsdata = wc;
return 0;
out_quota:
if (clusters_to_alloc)
dquot_free_space(inode,
ocfs2_clusters_to_bytes(osb->sb, clusters_to_alloc));
out_commit:
ocfs2_commit_trans(osb, handle);
out:
ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() The testcase "mmaptruncate" of ocfs2-test deadlocks occasionally. In this testcase, we create a 2*CLUSTER_SIZE file and mmap() on it; there are 2 process repeatedly performing the following operations respectively: one is doing memset(mmaped_addr + 2*CLUSTER_SIZE - 1, 'a', 1), while the another is playing ftruncate(fd, 2*CLUSTER_SIZE) and then ftruncate(fd, CLUSTER_SIZE) again and again. This is the backtrace when the deadlock happens: __wait_on_bit_lock+0x50/0xa0 __lock_page+0xb7/0xc0 ocfs2_write_begin_nolock+0x163f/0x1790 [ocfs2] ocfs2_page_mkwrite+0x1c7/0x2a0 [ocfs2] do_page_mkwrite+0x66/0xc0 handle_mm_fault+0x685/0x1350 __do_page_fault+0x1d8/0x4d0 trace_do_page_fault+0x37/0xf0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 In ocfs2_write_begin_nolock(), we first grab the pages and then allocate disk space for this write; ocfs2_try_to_free_truncate_log() will be called if -ENOSPC is returned; if we're lucky to get enough clusters, which is usually the case, we start over again. But in ocfs2_free_write_ctxt() the target page isn't unlocked, so we will deadlock when trying to grab the target page again. Also, -ENOMEM might be returned in ocfs2_grab_pages_for_write(). Another deadlock will happen in __do_page_mkwrite() if ocfs2_page_mkwrite() returns non-VM_FAULT_LOCKED, and along with a locked target page. These two errors fail on the same path, so fix them by unlocking the target page manually before ocfs2_free_write_ctxt(). Jan Kara helps me clear out the JBD2 part, and suggest the hint for root cause. Changes since v1: 1. Also put ENOMEM error case into consideration. Link: http://lkml.kernel.org/r/1474173902-32075-1-git-send-email-zren@suse.com Signed-off-by: Eric Ren <zren@suse.com> Reviewed-by: He Gang <ghe@suse.com> Acked-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-01 06:11:32 +08:00
/*
* The mmapped page won't be unlocked in ocfs2_free_write_ctxt(),
* even in case of error here like ENOSPC and ENOMEM. So, we need
* to unlock the target page manually to prevent deadlocks when
* retrying again on ENOSPC, or when returning non-VM_FAULT_LOCKED
* to VM code.
*/
if (wc->w_target_locked)
unlock_page(mmap_page);
ocfs2_free_write_ctxt(inode, wc);
if (data_ac) {
ocfs2_free_alloc_context(data_ac);
data_ac = NULL;
}
if (meta_ac) {
ocfs2_free_alloc_context(meta_ac);
meta_ac = NULL;
}
if (ret == -ENOSPC && try_free) {
/*
* Try to free some truncate log so that we can have enough
* clusters to allocate.
*/
try_free = 0;
ret1 = ocfs2_try_to_free_truncate_log(osb, clusters_need);
if (ret1 == 1)
goto try_again;
if (ret1 < 0)
mlog_errno(ret1);
}
return ret;
}
static int ocfs2_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
int ret;
struct buffer_head *di_bh = NULL;
struct inode *inode = mapping->host;
ret = ocfs2_inode_lock(inode, &di_bh, 1);
if (ret) {
mlog_errno(ret);
return ret;
}
/*
* Take alloc sem here to prevent concurrent lookups. That way
* the mapping, zeroing and tree manipulation within
* ocfs2_write() will be safe against ->readpage(). This
* should also serve to lock out allocation from a shared
* writeable region.
*/
down_write(&OCFS2_I(inode)->ip_alloc_sem);
ret = ocfs2_write_begin_nolock(mapping, pos, len, OCFS2_WRITE_BUFFER,
pagep, fsdata, di_bh, NULL);
if (ret) {
mlog_errno(ret);
goto out_fail;
}
brelse(di_bh);
return 0;
out_fail:
up_write(&OCFS2_I(inode)->ip_alloc_sem);
brelse(di_bh);
ocfs2_inode_unlock(inode, 1);
return ret;
}
static void ocfs2_write_end_inline(struct inode *inode, loff_t pos,
unsigned len, unsigned *copied,
struct ocfs2_dinode *di,
struct ocfs2_write_ctxt *wc)
{
void *kaddr;
if (unlikely(*copied < len)) {
if (!PageUptodate(wc->w_target_page)) {
*copied = 0;
return;
}
}
kaddr = kmap_atomic(wc->w_target_page);
memcpy(di->id2.i_data.id_data + pos, kaddr + pos, *copied);
kunmap_atomic(kaddr);
trace_ocfs2_write_end_inline(
(unsigned long long)OCFS2_I(inode)->ip_blkno,
(unsigned long long)pos, *copied,
le16_to_cpu(di->id2.i_data.id_count),
le16_to_cpu(di->i_dyn_features));
}
int ocfs2_write_end_nolock(struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied, void *fsdata)
{
ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock() 1: After we call ocfs2_journal_access_di() in ocfs2_write_begin(), jbd2_journal_restart() may also be called, in this function transaction A's t_updates-- and obtains a new transaction B. If jbd2_journal_commit_transaction() is happened to commit transaction A, when t_updates==0, it will continue to complete commit and unfile buffer. So when jbd2_journal_dirty_metadata(), the handle is pointed a new transaction B, and the buffer head's journal head is already freed, jh->b_transaction == NULL, jh->b_next_transaction == NULL, it returns EINVAL, So it triggers the BUG_ON(status). thread 1 jbd2 ocfs2_write_begin jbd2_journal_commit_transaction ocfs2_write_begin_nolock ocfs2_start_trans jbd2__journal_start(t_updates+1, transaction A) ocfs2_journal_access_di ocfs2_write_cluster_by_desc ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_extend_rotate_transaction jbd2_journal_restart (t_updates-1,transaction B) t_updates==0 __jbd2_journal_refile_buffer (jh->b_transaction = NULL) ocfs2_write_end ocfs2_write_end_nolock ocfs2_journal_dirty jbd2_journal_dirty_metadata(bug) ocfs2_commit_trans 2. In ext4, I found that: jbd2_journal_get_write_access() called by ext4_write_end. ext4_write_begin ext4_journal_start __ext4_journal_start_sb ext4_journal_check_start jbd2__journal_start ext4_write_end ext4_mark_inode_dirty ext4_reserve_inode_write ext4_journal_get_write_access jbd2_journal_get_write_access ext4_mark_iloc_dirty ext4_do_update_inode ext4_handle_dirty_metadata jbd2_journal_dirty_metadata 3. So I think we should put ocfs2_journal_access_di before ocfs2_journal_dirty in the ocfs2_write_end. and it works well after my modification. Signed-off-by: vicky <vicky.yangwenfang@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Zhangguanghui <zhang.guanghui@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 06:44:45 +08:00
int i, ret;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
unsigned from, to, start = pos & (PAGE_SIZE - 1);
struct inode *inode = mapping->host;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct ocfs2_write_ctxt *wc = fsdata;
struct ocfs2_dinode *di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
handle_t *handle = wc->w_handle;
struct page *tmppage;
BUG_ON(!list_empty(&wc->w_unwritten_list));
if (handle) {
ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode),
wc->w_di_bh, OCFS2_JOURNAL_ACCESS_WRITE);
if (ret) {
copied = ret;
mlog_errno(ret);
goto out;
}
ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock() 1: After we call ocfs2_journal_access_di() in ocfs2_write_begin(), jbd2_journal_restart() may also be called, in this function transaction A's t_updates-- and obtains a new transaction B. If jbd2_journal_commit_transaction() is happened to commit transaction A, when t_updates==0, it will continue to complete commit and unfile buffer. So when jbd2_journal_dirty_metadata(), the handle is pointed a new transaction B, and the buffer head's journal head is already freed, jh->b_transaction == NULL, jh->b_next_transaction == NULL, it returns EINVAL, So it triggers the BUG_ON(status). thread 1 jbd2 ocfs2_write_begin jbd2_journal_commit_transaction ocfs2_write_begin_nolock ocfs2_start_trans jbd2__journal_start(t_updates+1, transaction A) ocfs2_journal_access_di ocfs2_write_cluster_by_desc ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_extend_rotate_transaction jbd2_journal_restart (t_updates-1,transaction B) t_updates==0 __jbd2_journal_refile_buffer (jh->b_transaction = NULL) ocfs2_write_end ocfs2_write_end_nolock ocfs2_journal_dirty jbd2_journal_dirty_metadata(bug) ocfs2_commit_trans 2. In ext4, I found that: jbd2_journal_get_write_access() called by ext4_write_end. ext4_write_begin ext4_journal_start __ext4_journal_start_sb ext4_journal_check_start jbd2__journal_start ext4_write_end ext4_mark_inode_dirty ext4_reserve_inode_write ext4_journal_get_write_access jbd2_journal_get_write_access ext4_mark_iloc_dirty ext4_do_update_inode ext4_handle_dirty_metadata jbd2_journal_dirty_metadata 3. So I think we should put ocfs2_journal_access_di before ocfs2_journal_dirty in the ocfs2_write_end. and it works well after my modification. Signed-off-by: vicky <vicky.yangwenfang@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Zhangguanghui <zhang.guanghui@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 06:44:45 +08:00
}
if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
ocfs2_write_end_inline(inode, pos, len, &copied, di, wc);
goto out_write_size;
}
if (unlikely(copied < len) && wc->w_target_page) {
if (!PageUptodate(wc->w_target_page))
copied = 0;
ocfs2_zero_new_buffers(wc->w_target_page, start+copied,
start+len);
}
if (wc->w_target_page)
flush_dcache_page(wc->w_target_page);
for(i = 0; i < wc->w_num_pages; i++) {
tmppage = wc->w_pages[i];
/* This is the direct io target page. */
if (tmppage == NULL)
continue;
if (tmppage == wc->w_target_page) {
from = wc->w_target_from;
to = wc->w_target_to;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
BUG_ON(from > PAGE_SIZE ||
to > PAGE_SIZE ||
to < from);
} else {
/*
* Pages adjacent to the target (if any) imply
* a hole-filling write in which case we want
* to flush their entire range.
*/
from = 0;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
to = PAGE_SIZE;
}
if (page_has_buffers(tmppage)) {
if (handle && ocfs2_should_order_data(inode)) {
loff_t start_byte =
((loff_t)tmppage->index << PAGE_SHIFT) +
from;
loff_t length = to - from;
ocfs2_jbd2_inode_add_write(handle, inode,
start_byte, length);
}
block_commit_write(tmppage, from, to);
}
}
out_write_size:
/* Direct io do not update i_size here. */
if (wc->w_type != OCFS2_WRITE_DIRECT) {
pos += copied;
if (pos > i_size_read(inode)) {
i_size_write(inode, pos);
mark_inode_dirty(inode);
}
inode->i_blocks = ocfs2_inode_sector_count(inode);
di->i_size = cpu_to_le64((u64)i_size_read(inode));
inode->i_mtime = inode->i_ctime = current_time(inode);
di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec);
di->i_mtime_nsec = di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
if (handle)
ocfs2_update_inode_fsync_trans(handle, inode, 1);
}
if (handle)
ocfs2_journal_dirty(handle, wc->w_di_bh);
ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock() 1: After we call ocfs2_journal_access_di() in ocfs2_write_begin(), jbd2_journal_restart() may also be called, in this function transaction A's t_updates-- and obtains a new transaction B. If jbd2_journal_commit_transaction() is happened to commit transaction A, when t_updates==0, it will continue to complete commit and unfile buffer. So when jbd2_journal_dirty_metadata(), the handle is pointed a new transaction B, and the buffer head's journal head is already freed, jh->b_transaction == NULL, jh->b_next_transaction == NULL, it returns EINVAL, So it triggers the BUG_ON(status). thread 1 jbd2 ocfs2_write_begin jbd2_journal_commit_transaction ocfs2_write_begin_nolock ocfs2_start_trans jbd2__journal_start(t_updates+1, transaction A) ocfs2_journal_access_di ocfs2_write_cluster_by_desc ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_extend_rotate_transaction jbd2_journal_restart (t_updates-1,transaction B) t_updates==0 __jbd2_journal_refile_buffer (jh->b_transaction = NULL) ocfs2_write_end ocfs2_write_end_nolock ocfs2_journal_dirty jbd2_journal_dirty_metadata(bug) ocfs2_commit_trans 2. In ext4, I found that: jbd2_journal_get_write_access() called by ext4_write_end. ext4_write_begin ext4_journal_start __ext4_journal_start_sb ext4_journal_check_start jbd2__journal_start ext4_write_end ext4_mark_inode_dirty ext4_reserve_inode_write ext4_journal_get_write_access jbd2_journal_get_write_access ext4_mark_iloc_dirty ext4_do_update_inode ext4_handle_dirty_metadata jbd2_journal_dirty_metadata 3. So I think we should put ocfs2_journal_access_di before ocfs2_journal_dirty in the ocfs2_write_end. and it works well after my modification. Signed-off-by: vicky <vicky.yangwenfang@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Zhangguanghui <zhang.guanghui@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 06:44:45 +08:00
out:
/* unlock pages before dealloc since it needs acquiring j_trans_barrier
* lock, or it will cause a deadlock since journal commit threads holds
* this lock and will ask for the page lock when flushing the data.
* put it here to preserve the unlock order.
*/
ocfs2_unlock_pages(wc);
if (handle)
ocfs2_commit_trans(osb, handle);
ocfs2_run_deallocs(osb, &wc->w_dealloc);
brelse(wc->w_di_bh);
kfree(wc);
return copied;
}
static int ocfs2_write_end(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
int ret;
struct inode *inode = mapping->host;
ret = ocfs2_write_end_nolock(mapping, pos, len, copied, fsdata);
up_write(&OCFS2_I(inode)->ip_alloc_sem);
ocfs2_inode_unlock(inode, 1);
return ret;
}
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
struct ocfs2_dio_write_ctxt {
struct list_head dw_zero_list;
unsigned dw_zero_count;
int dw_orphaned;
pid_t dw_writer_pid;
};
static struct ocfs2_dio_write_ctxt *
ocfs2_dio_alloc_write_ctx(struct buffer_head *bh, int *alloc)
{
struct ocfs2_dio_write_ctxt *dwc = NULL;
if (bh->b_private)
return bh->b_private;
dwc = kmalloc(sizeof(struct ocfs2_dio_write_ctxt), GFP_NOFS);
if (dwc == NULL)
return NULL;
INIT_LIST_HEAD(&dwc->dw_zero_list);
dwc->dw_zero_count = 0;
dwc->dw_orphaned = 0;
dwc->dw_writer_pid = task_pid_nr(current);
bh->b_private = dwc;
*alloc = 1;
return dwc;
}
static void ocfs2_dio_free_write_ctx(struct inode *inode,
struct ocfs2_dio_write_ctxt *dwc)
{
ocfs2_free_unwritten_list(inode, &dwc->dw_zero_list);
kfree(dwc);
}
/*
* TODO: Make this into a generic get_blocks function.
*
* From do_direct_io in direct-io.c:
* "So what we do is to permit the ->get_blocks function to populate
* bh.b_size with the size of IO which is permitted at this offset and
* this i_blkbits."
*
* This function is called directly from get_more_blocks in direct-io.c.
*
* called like this: dio->get_blocks(dio->inode, fs_startblk,
* fs_count, map_bh, dio->rw == WRITE);
*/
ocfs2: ip_alloc_sem should be taken in ocfs2_get_block() ip_alloc_sem should be taken in ocfs2_get_block() when reading file in DIRECT mode to prevent concurrent access to extent tree with ocfs2_dio_end_io_write(), which may cause BUGON in the following situation: read file 'A' end_io of writing file 'A' vfs_read __vfs_read ocfs2_file_read_iter generic_file_read_iter ocfs2_direct_IO __blockdev_direct_IO do_blockdev_direct_IO do_direct_IO get_more_blocks ocfs2_get_block ocfs2_extent_map_get_blocks ocfs2_get_clusters ocfs2_get_clusters_nocache() ocfs2_search_extent_list return the index of record which contains the v_cluster, that is v_cluster > rec[i]->e_cpos. ocfs2_dio_end_io ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem); ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ... --> modify the rec[i]->e_cpos, resulting in v_cluster < rec[i]->e_cpos. BUG_ON(v_cluster < le32_to_cpu(rec->e_cpos)) [alex.chen@huawei.com: v3] Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Fixes: c15471f79506 ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Gang He <ghe@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 09:31:44 +08:00
static int ocfs2_dio_wr_get_block(struct inode *inode, sector_t iblock,
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
struct buffer_head *bh_result, int create)
{
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct ocfs2_inode_info *oi = OCFS2_I(inode);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
struct ocfs2_write_ctxt *wc;
struct ocfs2_write_cluster_desc *desc = NULL;
struct ocfs2_dio_write_ctxt *dwc = NULL;
struct buffer_head *di_bh = NULL;
u64 p_blkno;
unsigned int i_blkbits = inode->i_sb->s_blocksize_bits;
loff_t pos = iblock << i_blkbits;
sector_t endblk = (i_size_read(inode) - 1) >> i_blkbits;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
unsigned len, total_len = bh_result->b_size;
int ret = 0, first_get_block = 0;
len = osb->s_clustersize - (pos & (osb->s_clustersize - 1));
len = min(total_len, len);
/*
* bh_result->b_size is count in get_more_blocks according to write
* "pos" and "end", we need map twice to return different buffer state:
* 1. area in file size, not set NEW;
* 2. area out file size, set NEW.
*
* iblock endblk
* |--------|---------|---------|---------
* |<-------area in file------->|
*/
if ((iblock <= endblk) &&
((iblock + ((len - 1) >> i_blkbits)) > endblk))
len = (endblk - iblock + 1) << i_blkbits;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
mlog(0, "get block of %lu at %llu:%u req %u\n",
inode->i_ino, pos, len, total_len);
/*
* Because we need to change file size in ocfs2_dio_end_io_write(), or
* we may need to add it to orphan dir. So can not fall to fast path
* while file size will be changed.
*/
if (pos + total_len <= i_size_read(inode)) {
ocfs2: ip_alloc_sem should be taken in ocfs2_get_block() ip_alloc_sem should be taken in ocfs2_get_block() when reading file in DIRECT mode to prevent concurrent access to extent tree with ocfs2_dio_end_io_write(), which may cause BUGON in the following situation: read file 'A' end_io of writing file 'A' vfs_read __vfs_read ocfs2_file_read_iter generic_file_read_iter ocfs2_direct_IO __blockdev_direct_IO do_blockdev_direct_IO do_direct_IO get_more_blocks ocfs2_get_block ocfs2_extent_map_get_blocks ocfs2_get_clusters ocfs2_get_clusters_nocache() ocfs2_search_extent_list return the index of record which contains the v_cluster, that is v_cluster > rec[i]->e_cpos. ocfs2_dio_end_io ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem); ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ... --> modify the rec[i]->e_cpos, resulting in v_cluster < rec[i]->e_cpos. BUG_ON(v_cluster < le32_to_cpu(rec->e_cpos)) [alex.chen@huawei.com: v3] Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Fixes: c15471f79506 ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Gang He <ghe@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 09:31:44 +08:00
/* This is the fast path for re-write. */
ret = ocfs2_lock_get_block(inode, iblock, bh_result, create);
if (buffer_mapped(bh_result) &&
!buffer_new(bh_result) &&
ret == 0)
goto out;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
/* Clear state set by ocfs2_get_block. */
bh_result->b_state = 0;
}
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
dwc = ocfs2_dio_alloc_write_ctx(bh_result, &first_get_block);
if (unlikely(dwc == NULL)) {
ret = -ENOMEM;
mlog_errno(ret);
goto out;
}
if (ocfs2_clusters_for_bytes(inode->i_sb, pos + total_len) >
ocfs2_clusters_for_bytes(inode->i_sb, i_size_read(inode)) &&
!dwc->dw_orphaned) {
/*
* when we are going to alloc extents beyond file size, add the
* inode to orphan dir, so we can recall those spaces when
* system crashed during write.
*/
ret = ocfs2_add_inode_to_orphan(osb, inode);
if (ret < 0) {
mlog_errno(ret);
goto out;
}
dwc->dw_orphaned = 1;
}
ret = ocfs2_inode_lock(inode, &di_bh, 1);
if (ret) {
mlog_errno(ret);
goto out;
}
down_write(&oi->ip_alloc_sem);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
if (first_get_block) {
if (ocfs2_sparse_alloc(osb))
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
ret = ocfs2_zero_tail(inode, di_bh, pos);
else
ret = ocfs2_expand_nonsparse_inode(inode, di_bh, pos,
total_len, NULL);
if (ret < 0) {
mlog_errno(ret);
goto unlock;
}
}
ret = ocfs2_write_begin_nolock(inode->i_mapping, pos, len,
OCFS2_WRITE_DIRECT, NULL,
(void **)&wc, di_bh, NULL);
if (ret) {
mlog_errno(ret);
goto unlock;
}
desc = &wc->w_desc[0];
p_blkno = ocfs2_clusters_to_blocks(inode->i_sb, desc->c_phys);
BUG_ON(p_blkno == 0);
p_blkno += iblock & (u64)(ocfs2_clusters_to_blocks(inode->i_sb, 1) - 1);
map_bh(bh_result, inode->i_sb, p_blkno);
bh_result->b_size = len;
if (desc->c_needs_zero)
set_buffer_new(bh_result);
if (iblock > endblk)
set_buffer_new(bh_result);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
/* May sleep in end_io. It should not happen in a irq context. So defer
* it to dio work queue. */
set_buffer_defer_completion(bh_result);
if (!list_empty(&wc->w_unwritten_list)) {
struct ocfs2_unwritten_extent *ue = NULL;
ue = list_first_entry(&wc->w_unwritten_list,
struct ocfs2_unwritten_extent,
ue_node);
BUG_ON(ue->ue_cpos != desc->c_cpos);
/* The physical address may be 0, fill it. */
ue->ue_phys = desc->c_phys;
list_splice_tail_init(&wc->w_unwritten_list, &dwc->dw_zero_list);
dwc->dw_zero_count += wc->w_unwritten_count;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
}
ret = ocfs2_write_end_nolock(inode->i_mapping, pos, len, len, wc);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
BUG_ON(ret != len);
ret = 0;
unlock:
up_write(&oi->ip_alloc_sem);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
ocfs2_inode_unlock(inode, 1);
brelse(di_bh);
out:
if (ret < 0)
ret = -EIO;
return ret;
}
static int ocfs2_dio_end_io_write(struct inode *inode,
struct ocfs2_dio_write_ctxt *dwc,
loff_t offset,
ssize_t bytes)
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
{
struct ocfs2_cached_dealloc_ctxt dealloc;
struct ocfs2_extent_tree et;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct ocfs2_inode_info *oi = OCFS2_I(inode);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
struct ocfs2_unwritten_extent *ue = NULL;
struct buffer_head *di_bh = NULL;
struct ocfs2_dinode *di;
struct ocfs2_alloc_context *data_ac = NULL;
struct ocfs2_alloc_context *meta_ac = NULL;
handle_t *handle = NULL;
loff_t end = offset + bytes;
int ret = 0, credits = 0, locked = 0;
ocfs2_init_dealloc_ctxt(&dealloc);
/* We do clear unwritten, delete orphan, change i_size here. If neither
* of these happen, we can skip all this. */
if (list_empty(&dwc->dw_zero_list) &&
end <= i_size_read(inode) &&
!dwc->dw_orphaned)
goto out;
/* ocfs2_file_write_iter will get i_mutex, so we need not lock if we
* are in that context. */
if (dwc->dw_writer_pid != task_pid_nr(current)) {
inode_lock(inode);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
locked = 1;
}
ret = ocfs2_inode_lock(inode, &di_bh, 1);
if (ret < 0) {
mlog_errno(ret);
goto out;
}
down_write(&oi->ip_alloc_sem);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
/* Delete orphan before acquire i_mutex. */
if (dwc->dw_orphaned) {
BUG_ON(dwc->dw_writer_pid != task_pid_nr(current));
end = end > i_size_read(inode) ? end : 0;
ret = ocfs2_del_inode_from_orphan(osb, inode, di_bh,
!!end, end);
if (ret < 0)
mlog_errno(ret);
}
di = (struct ocfs2_dinode *)di_bh->b_data;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), di_bh);
ocfs2: try to reuse extent block in dealloc without meta_alloc A crash issue was reported by John Lightsey with a call trace as follows: ocfs2_split_extent+0x1ad3/0x1b40 [ocfs2] ocfs2_change_extent_flag+0x33a/0x470 [ocfs2] ocfs2_mark_extent_written+0x172/0x220 [ocfs2] ocfs2_dio_end_io+0x62d/0x910 [ocfs2] dio_complete+0x19a/0x1a0 do_blockdev_direct_IO+0x19dd/0x1eb0 __blockdev_direct_IO+0x43/0x50 ocfs2_direct_IO+0x8f/0xa0 [ocfs2] generic_file_direct_write+0xb2/0x170 __generic_file_write_iter+0xc3/0x1b0 ocfs2_file_write_iter+0x4bb/0xca0 [ocfs2] __vfs_write+0xae/0xf0 vfs_write+0xb8/0x1b0 SyS_write+0x4f/0xb0 system_call_fastpath+0x16/0x75 The BUG code told that extent tree wants to grow but no metadata was reserved ahead of time. From my investigation into this issue, the root cause it that although enough metadata is not reserved, there should be enough for following use. Rightmost extent is merged into its left one due to a certain times of marking extent written. Because during marking extent written, we got many physically continuous extents. At last, an empty extent showed up and the rightmost path is removed from extent tree. Add a new mechanism to reuse extent block cached in dealloc which were just unlinked from extent tree to solve this crash issue. Criteria is that during marking extents *written*, if extent rotation and merging results in unlinking extent with growing extent tree later without any metadata reserved ahead of time, try to reuse those extents in dealloc in which deleted extents are cached. Also, this patch addresses the issue John reported that ::dw_zero_count is not calculated properly. After applying this patch, the issue John reported was gone. Thanks for the reproducer provided by John. And this patch has passed ocfs2-test(29 cases) suite running by New H3C Group. [ge.changwei@h3c.com: fix static checker warnning] Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373F29196AE@H3CMLB12-EX.srv.huawei-3com.com [akpm@linux-foundation.org: brelse(NULL) is legal] Link: http://lkml.kernel.org/r/1515479070-32653-2-git-send-email-ge.changwei@h3c.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Reported-by: John Lightsey <john@nixnuts.net> Tested-by: John Lightsey <john@nixnuts.net> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mark Fasheh <mfasheh@versity.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 08:15:06 +08:00
/* Attach dealloc with extent tree in case that we may reuse extents
* which are already unlinked from current extent tree due to extent
* rotation and merging.
*/
et.et_dealloc = &dealloc;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
ret = ocfs2_lock_allocators(inode, &et, 0, dwc->dw_zero_count*2,
&data_ac, &meta_ac);
if (ret) {
mlog_errno(ret);
goto unlock;
}
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
credits = ocfs2_calc_extend_credits(inode->i_sb, &di->id2.i_list);
handle = ocfs2_start_trans(osb, credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
mlog_errno(ret);
goto unlock;
}
ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), di_bh,
OCFS2_JOURNAL_ACCESS_WRITE);
if (ret) {
mlog_errno(ret);
goto commit;
}
list_for_each_entry(ue, &dwc->dw_zero_list, ue_node) {
ret = ocfs2_mark_extent_written(inode, &et, handle,
ue->ue_cpos, 1,
ue->ue_phys,
meta_ac, &dealloc);
if (ret < 0) {
mlog_errno(ret);
break;
}
}
if (end > i_size_read(inode)) {
ret = ocfs2_set_inode_size(handle, inode, di_bh, end);
if (ret < 0)
mlog_errno(ret);
}
commit:
ocfs2_commit_trans(osb, handle);
unlock:
up_write(&oi->ip_alloc_sem);
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
ocfs2_inode_unlock(inode, 1);
brelse(di_bh);
out:
if (data_ac)
ocfs2_free_alloc_context(data_ac);
if (meta_ac)
ocfs2_free_alloc_context(meta_ac);
ocfs2_run_deallocs(osb, &dealloc);
if (locked)
inode_unlock(inode);
ocfs2_dio_free_write_ctx(inode, dwc);
return ret;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
}
/*
* ocfs2_dio_end_io is called by the dio core when a dio is finished. We're
* particularly interested in the aio/dio case. We use the rw_lock DLM lock
* to protect io on one node from truncation on another.
*/
static int ocfs2_dio_end_io(struct kiocb *iocb,
loff_t offset,
ssize_t bytes,
void *private)
{
struct inode *inode = file_inode(iocb->ki_filp);
int level;
int ret = 0;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
/* this io's submitter should not have unlocked this before we could */
BUG_ON(!ocfs2_iocb_is_rw_locked(iocb));
if (bytes <= 0)
mlog_ratelimited(ML_ERROR, "Direct IO failed, bytes = %lld",
(long long)bytes);
if (private) {
if (bytes > 0)
ret = ocfs2_dio_end_io_write(inode, private, offset,
bytes);
else
ocfs2_dio_free_write_ctx(inode, private);
}
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
ocfs2_iocb_clear_rw_locked(iocb);
level = ocfs2_iocb_rw_locked_level(iocb);
ocfs2_rw_unlock(inode, level);
return ret;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
}
static ssize_t ocfs2_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
get_block_t *get_block;
/*
* Fallback to buffered I/O if we see an inode without
* extents.
*/
if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL)
return 0;
/* Fallback to buffered I/O if we do not support append dio. */
if (iocb->ki_pos + iter->count > i_size_read(inode) &&
!ocfs2_supports_append_dio(osb))
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
return 0;
if (iov_iter_rw(iter) == READ)
ocfs2: ip_alloc_sem should be taken in ocfs2_get_block() ip_alloc_sem should be taken in ocfs2_get_block() when reading file in DIRECT mode to prevent concurrent access to extent tree with ocfs2_dio_end_io_write(), which may cause BUGON in the following situation: read file 'A' end_io of writing file 'A' vfs_read __vfs_read ocfs2_file_read_iter generic_file_read_iter ocfs2_direct_IO __blockdev_direct_IO do_blockdev_direct_IO do_direct_IO get_more_blocks ocfs2_get_block ocfs2_extent_map_get_blocks ocfs2_get_clusters ocfs2_get_clusters_nocache() ocfs2_search_extent_list return the index of record which contains the v_cluster, that is v_cluster > rec[i]->e_cpos. ocfs2_dio_end_io ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem); ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ... --> modify the rec[i]->e_cpos, resulting in v_cluster < rec[i]->e_cpos. BUG_ON(v_cluster < le32_to_cpu(rec->e_cpos)) [alex.chen@huawei.com: v3] Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Fixes: c15471f79506 ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Gang He <ghe@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 09:31:44 +08:00
get_block = ocfs2_lock_get_block;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
else
ocfs2: ip_alloc_sem should be taken in ocfs2_get_block() ip_alloc_sem should be taken in ocfs2_get_block() when reading file in DIRECT mode to prevent concurrent access to extent tree with ocfs2_dio_end_io_write(), which may cause BUGON in the following situation: read file 'A' end_io of writing file 'A' vfs_read __vfs_read ocfs2_file_read_iter generic_file_read_iter ocfs2_direct_IO __blockdev_direct_IO do_blockdev_direct_IO do_direct_IO get_more_blocks ocfs2_get_block ocfs2_extent_map_get_blocks ocfs2_get_clusters ocfs2_get_clusters_nocache() ocfs2_search_extent_list return the index of record which contains the v_cluster, that is v_cluster > rec[i]->e_cpos. ocfs2_dio_end_io ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem); ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ... --> modify the rec[i]->e_cpos, resulting in v_cluster < rec[i]->e_cpos. BUG_ON(v_cluster < le32_to_cpu(rec->e_cpos)) [alex.chen@huawei.com: v3] Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Fixes: c15471f79506 ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Gang He <ghe@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 09:31:44 +08:00
get_block = ocfs2_dio_wr_get_block;
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
return __blockdev_direct_IO(iocb, inode, inode->i_sb->s_bdev,
iter, get_block,
ocfs2: fix sparse file & data ordering issue in direct io There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:21:09 +08:00
ocfs2_dio_end_io, NULL, 0);
}
const struct address_space_operations ocfs2_aops = {
.readpage = ocfs2_readpage,
.readpages = ocfs2_readpages,
.writepage = ocfs2_writepage,
.write_begin = ocfs2_write_begin,
.write_end = ocfs2_write_end,
.bmap = ocfs2_bmap,
.direct_IO = ocfs2_direct_IO,
.invalidatepage = block_invalidatepage,
.releasepage = ocfs2_releasepage,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
.error_remove_page = generic_error_remove_page,
};