renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code
64f9477f95
linux-next/drivers/media/video/saa711x_regs.h

550 lines
22 KiB
C
Raw Normal View History

V4L/DVB (4551): Added register aliases for saa711x registers, instead of using reg numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-29 06:18:49 +08:00
/* saa711x - Philips SAA711x video decoder register specifications
*
* Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define R_00_CHIP_VERSION 0x00
/* Video Decoder */
/* Video Decoder - Frontend part */
#define R_01_INC_DELAY 0x01
#define R_02_INPUT_CNTL_1 0x02
#define R_03_INPUT_CNTL_2 0x03
#define R_04_INPUT_CNTL_3 0x04
#define R_05_INPUT_CNTL_4 0x05
/* Video Decoder - Decoder part */
#define R_06_H_SYNC_START 0x06
#define R_07_H_SYNC_STOP 0x07
#define R_08_SYNC_CNTL 0x08
#define R_09_LUMA_CNTL 0x09
#define R_0A_LUMA_BRIGHT_CNTL 0x0a
#define R_0B_LUMA_CONTRAST_CNTL 0x0b
#define R_0C_CHROMA_SAT_CNTL 0x0c
#define R_0D_CHROMA_HUE_CNTL 0x0d
#define R_0E_CHROMA_CNTL_1 0x0e
#define R_0F_CHROMA_GAIN_CNTL 0x0f
#define R_10_CHROMA_CNTL_2 0x10
#define R_11_MODE_DELAY_CNTL 0x11
#define R_12_RT_SIGNAL_CNTL 0x12
#define R_13_RT_X_PORT_OUT_CNTL 0x13
#define R_14_ANAL_ADC_COMPAT_CNTL 0x14
#define R_15_VGATE_START_FID_CHG 0x15
#define R_16_VGATE_STOP 0x16
#define R_17_MISC_VGATE_CONF_AND_MSB 0x17
#define R_18_RAW_DATA_GAIN_CNTL 0x18
#define R_19_RAW_DATA_OFF_CNTL 0x19
#define R_1A_COLOR_KILL_LVL_CNTL 0x1a
#define R_1B_MISC_TVVCRDET 0x1b
#define R_1C_ENHAN_COMB_CTRL1 0x1c
#define R_1D_ENHAN_COMB_CTRL2 0x1d
#define R_1E_STATUS_BYTE_1_VD_DEC 0x1e
#define R_1F_STATUS_BYTE_2_VD_DEC 0x1f
/* Component processing and interrupt masking part */
#define R_23_INPUT_CNTL_5 0x23
#define R_24_INPUT_CNTL_6 0x24
#define R_25_INPUT_CNTL_7 0x25
#define R_29_COMP_DELAY 0x29
#define R_2A_COMP_BRIGHT_CNTL 0x2a
#define R_2B_COMP_CONTRAST_CNTL 0x2b
#define R_2C_COMP_SAT_CNTL 0x2c
#define R_2D_INTERRUPT_MASK_1 0x2d
#define R_2E_INTERRUPT_MASK_2 0x2e
#define R_2F_INTERRUPT_MASK_3 0x2f
/* Audio clock generator part */
#define R_30_AUD_MAST_CLK_CYCLES_PER_FIELD 0x30
#define R_34_AUD_MAST_CLK_NOMINAL_INC 0x34
#define R_38_CLK_RATIO_AMXCLK_TO_ASCLK 0x38
#define R_39_CLK_RATIO_ASCLK_TO_ALRCLK 0x39
#define R_3A_AUD_CLK_GEN_BASIC_SETUP 0x3a
/* General purpose VBI data slicer part */
#define R_40_SLICER_CNTL_1 0x40
#define R_41_LCR_BASE 0x41
#define R_58_PROGRAM_FRAMING_CODE 0x58
#define R_59_H_OFF_FOR_SLICER 0x59
#define R_5A_V_OFF_FOR_SLICER 0x5a
#define R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF 0x5b
#define R_5D_DID 0x5d
#define R_5E_SDID 0x5e
#define R_60_SLICER_STATUS_BYTE_0 0x60
#define R_61_SLICER_STATUS_BYTE_1 0x61
#define R_62_SLICER_STATUS_BYTE_2 0x62
/* X port, I port and the scaler part */
/* Task independent global settings */
#define R_80_GLOBAL_CNTL_1 0x80
#define R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F 0x81
#define R_83_X_PORT_I_O_ENA_AND_OUT_CLK 0x83
#define R_84_I_PORT_SIGNAL_DEF 0x84
#define R_85_I_PORT_SIGNAL_POLAR 0x85
#define R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT 0x86
#define R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED 0x87
#define R_88_POWER_SAVE_ADC_PORT_CNTL 0x88
#define R_8F_STATUS_INFO_SCALER 0x8f
/* Task A definition */
/* Basic settings and acquisition window definition */
#define R_90_A_TASK_HANDLING_CNTL 0x90
#define R_91_A_X_PORT_FORMATS_AND_CONF 0x91
#define R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL 0x92
#define R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF 0x93
#define R_94_A_HORIZ_INPUT_WINDOW_START 0x94
#define R_95_A_HORIZ_INPUT_WINDOW_START_MSB 0x95
#define R_96_A_HORIZ_INPUT_WINDOW_LENGTH 0x96
#define R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB 0x97
#define R_98_A_VERT_INPUT_WINDOW_START 0x98
#define R_99_A_VERT_INPUT_WINDOW_START_MSB 0x99
#define R_9A_A_VERT_INPUT_WINDOW_LENGTH 0x9a
#define R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB 0x9b
#define R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH 0x9c
#define R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0x9d
#define R_9E_A_VERT_OUTPUT_WINDOW_LENGTH 0x9e
#define R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB 0x9f
/* FIR filtering and prescaling */
#define R_A0_A_HORIZ_PRESCALING 0xa0
#define R_A1_A_ACCUMULATION_LENGTH 0xa1
#define R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xa2
#define R_A4_A_LUMA_BRIGHTNESS_CNTL 0xa4
#define R_A5_A_LUMA_CONTRAST_CNTL 0xa5
#define R_A6_A_CHROMA_SATURATION_CNTL 0xa6
/* Horizontal phase scaling */
#define R_A8_A_HORIZ_LUMA_SCALING_INC 0xa8
#define R_A9_A_HORIZ_LUMA_SCALING_INC_MSB 0xa9
#define R_AA_A_HORIZ_LUMA_PHASE_OFF 0xaa
#define R_AC_A_HORIZ_CHROMA_SCALING_INC 0xac
#define R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB 0xad
#define R_AE_A_HORIZ_CHROMA_PHASE_OFF 0xae
#define R_AF_A_HORIZ_CHROMA_PHASE_OFF_MSB 0xaf
/* Vertical scaling */
#define R_B0_A_VERT_LUMA_SCALING_INC 0xb0
#define R_B1_A_VERT_LUMA_SCALING_INC_MSB 0xb1
#define R_B2_A_VERT_CHROMA_SCALING_INC 0xb2
#define R_B3_A_VERT_CHROMA_SCALING_INC_MSB 0xb3
#define R_B4_A_VERT_SCALING_MODE_CNTL 0xb4
#define R_B8_A_VERT_CHROMA_PHASE_OFF_00 0xb8
#define R_B9_A_VERT_CHROMA_PHASE_OFF_01 0xb9
#define R_BA_A_VERT_CHROMA_PHASE_OFF_10 0xba
#define R_BB_A_VERT_CHROMA_PHASE_OFF_11 0xbb
#define R_BC_A_VERT_LUMA_PHASE_OFF_00 0xbc
#define R_BD_A_VERT_LUMA_PHASE_OFF_01 0xbd
#define R_BE_A_VERT_LUMA_PHASE_OFF_10 0xbe
#define R_BF_A_VERT_LUMA_PHASE_OFF_11 0xbf
/* Task B definition */
/* Basic settings and acquisition window definition */
#define R_C0_B_TASK_HANDLING_CNTL 0xc0
#define R_C1_B_X_PORT_FORMATS_AND_CONF 0xc1
#define R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION 0xc2
#define R_C3_B_I_PORT_FORMATS_AND_CONF 0xc3
#define R_C4_B_HORIZ_INPUT_WINDOW_START 0xc4
#define R_C5_B_HORIZ_INPUT_WINDOW_START_MSB 0xc5
#define R_C6_B_HORIZ_INPUT_WINDOW_LENGTH 0xc6
#define R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB 0xc7
#define R_C8_B_VERT_INPUT_WINDOW_START 0xc8
#define R_C9_B_VERT_INPUT_WINDOW_START_MSB 0xc9
#define R_CA_B_VERT_INPUT_WINDOW_LENGTH 0xca
#define R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB 0xcb
#define R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH 0xcc
#define R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0xcd
#define R_CE_B_VERT_OUTPUT_WINDOW_LENGTH 0xce
#define R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB 0xcf
/* FIR filtering and prescaling */
#define R_D0_B_HORIZ_PRESCALING 0xd0
#define R_D1_B_ACCUMULATION_LENGTH 0xd1
#define R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xd2
#define R_D4_B_LUMA_BRIGHTNESS_CNTL 0xd4
#define R_D5_B_LUMA_CONTRAST_CNTL 0xd5
#define R_D6_B_CHROMA_SATURATION_CNTL 0xd6
/* Horizontal phase scaling */
#define R_D8_B_HORIZ_LUMA_SCALING_INC 0xd8
#define R_D9_B_HORIZ_LUMA_SCALING_INC_MSB 0xd9
#define R_DA_B_HORIZ_LUMA_PHASE_OFF 0xda
#define R_DC_B_HORIZ_CHROMA_SCALING 0xdc
#define R_DD_B_HORIZ_CHROMA_SCALING_MSB 0xdd
#define R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA 0xde
/* Vertical scaling */
#define R_E0_B_VERT_LUMA_SCALING_INC 0xe0
#define R_E1_B_VERT_LUMA_SCALING_INC_MSB 0xe1
#define R_E2_B_VERT_CHROMA_SCALING_INC 0xe2
#define R_E3_B_VERT_CHROMA_SCALING_INC_MSB 0xe3
#define R_E4_B_VERT_SCALING_MODE_CNTL 0xe4
#define R_E8_B_VERT_CHROMA_PHASE_OFF_00 0xe8
#define R_E9_B_VERT_CHROMA_PHASE_OFF_01 0xe9
#define R_EA_B_VERT_CHROMA_PHASE_OFF_10 0xea
#define R_EB_B_VERT_CHROMA_PHASE_OFF_11 0xeb
#define R_EC_B_VERT_LUMA_PHASE_OFF_00 0xec
#define R_ED_B_VERT_LUMA_PHASE_OFF_01 0xed
#define R_EE_B_VERT_LUMA_PHASE_OFF_10 0xee
#define R_EF_B_VERT_LUMA_PHASE_OFF_11 0xef
/* second PLL (PLL2) and Pulsegenerator Programming */
#define R_F0_LFCO_PER_LINE 0xf0
#define R_F1_P_I_PARAM_SELECT 0xf1
#define R_F2_NOMINAL_PLL2_DTO 0xf2
#define R_F3_PLL_INCREMENT 0xf3
#define R_F4_PLL2_STATUS 0xf4
#define R_F5_PULSGEN_LINE_LENGTH 0xf5
#define R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG 0xf6
#define R_F7_PULSE_A_POS_MSB 0xf7
#define R_F8_PULSE_B_POS 0xf8
#define R_F9_PULSE_B_POS_MSB 0xf9
#define R_FA_PULSE_C_POS 0xfa
#define R_FB_PULSE_C_POS_MSB 0xfb
#define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES 0xff
#if 0
/* Those structs will be used in the future for debug purposes */
struct saa711x_reg_descr {
u8 reg;
int count;
char *name;
};
struct saa711x_reg_descr saa711x_regs[] = {
/* REG COUNT NAME */
{R_00_CHIP_VERSION,1,
"Chip version"},
/* Video Decoder: R_01_INC_DELAY to R_1F_STATUS_BYTE_2_VD_DEC */
/* Video Decoder - Frontend part: R_01_INC_DELAY to R_05_INPUT_CNTL_4 */
{R_01_INC_DELAY,1,
"Increment delay"},
{R_02_INPUT_CNTL_1,1,
"Analog input control 1"},
{R_03_INPUT_CNTL_2,1,
"Analog input control 2"},
{R_04_INPUT_CNTL_3,1,
"Analog input control 3"},
{R_05_INPUT_CNTL_4,1,
"Analog input control 4"},
/* Video Decoder - Decoder part: R_06_H_SYNC_START to R_1F_STATUS_BYTE_2_VD_DEC */
{R_06_H_SYNC_START,1,
"Horizontal sync start"},
{R_07_H_SYNC_STOP,1,
"Horizontal sync stop"},
{R_08_SYNC_CNTL,1,
"Sync control"},
{R_09_LUMA_CNTL,1,
"Luminance control"},
{R_0A_LUMA_BRIGHT_CNTL,1,
"Luminance brightness control"},
{R_0B_LUMA_CONTRAST_CNTL,1,
"Luminance contrast control"},
{R_0C_CHROMA_SAT_CNTL,1,
"Chrominance saturation control"},
{R_0D_CHROMA_HUE_CNTL,1,
"Chrominance hue control"},
{R_0E_CHROMA_CNTL_1,1,
"Chrominance control 1"},
{R_0F_CHROMA_GAIN_CNTL,1,
"Chrominance gain control"},
{R_10_CHROMA_CNTL_2,1,
"Chrominance control 2"},
{R_11_MODE_DELAY_CNTL,1,
"Mode/delay control"},
{R_12_RT_SIGNAL_CNTL,1,
"RT signal control"},
{R_13_RT_X_PORT_OUT_CNTL,1,
"RT/X port output control"},
{R_14_ANAL_ADC_COMPAT_CNTL,1,
"Analog/ADC/compatibility control"},
{R_15_VGATE_START_FID_CHG, 1,
"VGATE start FID change"},
{R_16_VGATE_STOP,1,
"VGATE stop"},
{R_17_MISC_VGATE_CONF_AND_MSB, 1,
"Miscellaneous VGATE configuration and MSBs"},
{R_18_RAW_DATA_GAIN_CNTL,1,
"Raw data gain control",},
{R_19_RAW_DATA_OFF_CNTL,1,
"Raw data offset control",},
{R_1A_COLOR_KILL_LVL_CNTL,1,
"Color Killer Level Control"},
{ R_1B_MISC_TVVCRDET, 1,
"MISC /TVVCRDET"},
{ R_1C_ENHAN_COMB_CTRL1, 1,
"Enhanced comb ctrl1"},
{ R_1D_ENHAN_COMB_CTRL2, 1,
"Enhanced comb ctrl1"},
{R_1E_STATUS_BYTE_1_VD_DEC,1,
"Status byte 1 video decoder"},
{R_1F_STATUS_BYTE_2_VD_DEC,1,
"Status byte 2 video decoder"},
/* Component processing and interrupt masking part: 0x20h to R_2F_INTERRUPT_MASK_3 */
/* 0x20 to 0x22 - Reserved */
{R_23_INPUT_CNTL_5,1,
"Analog input control 5"},
{R_24_INPUT_CNTL_6,1,
"Analog input control 6"},
{R_25_INPUT_CNTL_7,1,
"Analog input control 7"},
/* 0x26 to 0x28 - Reserved */
{R_29_COMP_DELAY,1,
"Component delay"},
{R_2A_COMP_BRIGHT_CNTL,1,
"Component brightness control"},
{R_2B_COMP_CONTRAST_CNTL,1,
"Component contrast control"},
{R_2C_COMP_SAT_CNTL,1,
"Component saturation control"},
{R_2D_INTERRUPT_MASK_1,1,
"Interrupt mask 1"},
{R_2E_INTERRUPT_MASK_2,1,
"Interrupt mask 2"},
{R_2F_INTERRUPT_MASK_3,1,
"Interrupt mask 3"},
/* Audio clock generator part: R_30_AUD_MAST_CLK_CYCLES_PER_FIELD to 0x3f */
{R_30_AUD_MAST_CLK_CYCLES_PER_FIELD,3,
"Audio master clock cycles per field"},
/* 0x33 - Reserved */
{R_34_AUD_MAST_CLK_NOMINAL_INC,3,
"Audio master clock nominal increment"},
/* 0x37 - Reserved */
{R_38_CLK_RATIO_AMXCLK_TO_ASCLK,1,
"Clock ratio AMXCLK to ASCLK"},
{R_39_CLK_RATIO_ASCLK_TO_ALRCLK,1,
"Clock ratio ASCLK to ALRCLK"},
{R_3A_AUD_CLK_GEN_BASIC_SETUP,1,
"Audio clock generator basic setup"},
/* 0x3b-0x3f - Reserved */
/* General purpose VBI data slicer part: R_40_SLICER_CNTL_1 to 0x7f */
{R_40_SLICER_CNTL_1,1,
"Slicer control 1"},
{R_41_LCR,23,
"R_41_LCR"},
{R_58_PROGRAM_FRAMING_CODE,1,
"Programmable framing code"},
{R_59_H_OFF_FOR_SLICER,1,
"Horizontal offset for slicer"},
{R_5A_V_OFF_FOR_SLICER,1,
"Vertical offset for slicer"},
{R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF,1,
"Field offset and MSBs for horizontal and vertical offset"},
{R_5D_DID,1,
"Header and data identification (R_5D_DID)"},
{R_5E_SDID,1,
"Sliced data identification (R_5E_SDID) code"},
{R_60_SLICER_STATUS_BYTE_0,1,
"Slicer status byte 0"},
{R_61_SLICER_STATUS_BYTE_1,1,
"Slicer status byte 1"},
{R_62_SLICER_STATUS_BYTE_2,1,
"Slicer status byte 2"},
/* 0x63-0x7f - Reserved */
/* X port, I port and the scaler part: R_80_GLOBAL_CNTL_1 to R_EF_B_VERT_LUMA_PHASE_OFF_11 */
/* Task independent global settings: R_80_GLOBAL_CNTL_1 to R_8F_STATUS_INFO_SCALER */
{R_80_GLOBAL_CNTL_1,1,
"Global control 1"},
{R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F,1,
"Vertical sync and Field ID source selection, retimed V and F signals"},
/* 0x82 - Reserved */
{R_83_X_PORT_I_O_ENA_AND_OUT_CLK,1,
"X port I/O enable and output clock"},
{R_84_I_PORT_SIGNAL_DEF,1,
"I port signal definitions"},
{R_85_I_PORT_SIGNAL_POLAR,1,
"I port signal polarities"},
{R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT,1,
"I port FIFO flag control and arbitration"},
{R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 1,
"I port I/O enable output clock and gated"},
{R_88_POWER_SAVE_ADC_PORT_CNTL,1,
"Power save/ADC port control"},
/* 089-0x8e - Reserved */
{R_8F_STATUS_INFO_SCALER,1,
"Status information scaler part"},
/* Task A definition: R_90_A_TASK_HANDLING_CNTL to R_BF_A_VERT_LUMA_PHASE_OFF_11 */
/* Task A: Basic settings and acquisition window definition */
{R_90_A_TASK_HANDLING_CNTL,1,
"Task A: Task handling control"},
{R_91_A_X_PORT_FORMATS_AND_CONF,1,
"Task A: X port formats and configuration"},
{R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL,1,
"Task A: X port input reference signal definition"},
{R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF,1,
"Task A: I port output formats and configuration"},
{R_94_A_HORIZ_INPUT_WINDOW_START,2,
"Task A: Horizontal input window start"},
{R_96_A_HORIZ_INPUT_WINDOW_LENGTH,2,
"Task A: Horizontal input window length"},
{R_98_A_VERT_INPUT_WINDOW_START,2,
"Task A: Vertical input window start"},
{R_9A_A_VERT_INPUT_WINDOW_LENGTH,2,
"Task A: Vertical input window length"},
{R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH,2,
"Task A: Horizontal output window length"},
{R_9E_A_VERT_OUTPUT_WINDOW_LENGTH,2,
"Task A: Vertical output window length"},
/* Task A: FIR filtering and prescaling */
{R_A0_A_HORIZ_PRESCALING,1,
"Task A: Horizontal prescaling"},
{R_A1_A_ACCUMULATION_LENGTH,1,
"Task A: Accumulation length"},
{R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1,
"Task A: Prescaler DC gain and FIR prefilter"},
/* 0xa3 - Reserved */
{R_A4_A_LUMA_BRIGHTNESS_CNTL,1,
"Task A: Luminance brightness control"},
{R_A5_A_LUMA_CONTRAST_CNTL,1,
"Task A: Luminance contrast control"},
{R_A6_A_CHROMA_SATURATION_CNTL,1,
"Task A: Chrominance saturation control"},
/* 0xa7 - Reserved */
/* Task A: Horizontal phase scaling */
{R_A8_A_HORIZ_LUMA_SCALING_INC,2,
"Task A: Horizontal luminance scaling increment"},
{R_AA_A_HORIZ_LUMA_PHASE_OFF,1,
"Task A: Horizontal luminance phase offset"},
/* 0xab - Reserved */
{R_AC_A_HORIZ_CHROMA_SCALING_INC,2,
"Task A: Horizontal chrominance scaling increment"},
{R_AE_A_HORIZ_CHROMA_PHASE_OFF,1,
"Task A: Horizontal chrominance phase offset"},
/* 0xaf - Reserved */
/* Task A: Vertical scaling */
{R_B0_A_VERT_LUMA_SCALING_INC,2,
"Task A: Vertical luminance scaling increment"},
{R_B2_A_VERT_CHROMA_SCALING_INC,2,
"Task A: Vertical chrominance scaling increment"},
{R_B4_A_VERT_SCALING_MODE_CNTL,1,
"Task A: Vertical scaling mode control"},
/* 0xb5-0xb7 - Reserved */
{R_B8_A_VERT_CHROMA_PHASE_OFF_00,1,
"Task A: Vertical chrominance phase offset '00'"},
{R_B9_A_VERT_CHROMA_PHASE_OFF_01,1,
"Task A: Vertical chrominance phase offset '01'"},
{R_BA_A_VERT_CHROMA_PHASE_OFF_10,1,
"Task A: Vertical chrominance phase offset '10'"},
{R_BB_A_VERT_CHROMA_PHASE_OFF_11,1,
"Task A: Vertical chrominance phase offset '11'"},
{R_BC_A_VERT_LUMA_PHASE_OFF_00,1,
"Task A: Vertical luminance phase offset '00'"},
{R_BD_A_VERT_LUMA_PHASE_OFF_01,1,
"Task A: Vertical luminance phase offset '01'"},
{R_BE_A_VERT_LUMA_PHASE_OFF_10,1,
"Task A: Vertical luminance phase offset '10'"},
{R_BF_A_VERT_LUMA_PHASE_OFF_11,1,
"Task A: Vertical luminance phase offset '11'"},
/* Task B definition: R_C0_B_TASK_HANDLING_CNTL to R_EF_B_VERT_LUMA_PHASE_OFF_11 */
/* Task B: Basic settings and acquisition window definition */
{R_C0_B_TASK_HANDLING_CNTL,1,
"Task B: Task handling control"},
{R_C1_B_X_PORT_FORMATS_AND_CONF,1,
"Task B: X port formats and configuration"},
{R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION,1,
"Task B: Input reference signal definition"},
{R_C3_B_I_PORT_FORMATS_AND_CONF,1,
"Task B: I port formats and configuration"},
{R_C4_B_HORIZ_INPUT_WINDOW_START,2,
"Task B: Horizontal input window start"},
{R_C6_B_HORIZ_INPUT_WINDOW_LENGTH,2,
"Task B: Horizontal input window length"},
{R_C8_B_VERT_INPUT_WINDOW_START,2,
"Task B: Vertical input window start"},
{R_CA_B_VERT_INPUT_WINDOW_LENGTH,2,
"Task B: Vertical input window length"},
{R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,2,
"Task B: Horizontal output window length"},
{R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,2,
"Task B: Vertical output window length"},
/* Task B: FIR filtering and prescaling */
{R_D0_B_HORIZ_PRESCALING,1,
"Task B: Horizontal prescaling"},
{R_D1_B_ACCUMULATION_LENGTH,1,
"Task B: Accumulation length"},
{R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1,
"Task B: Prescaler DC gain and FIR prefilter"},
/* 0xd3 - Reserved */
{R_D4_B_LUMA_BRIGHTNESS_CNTL,1,
"Task B: Luminance brightness control"},
{R_D5_B_LUMA_CONTRAST_CNTL,1,
"Task B: Luminance contrast control"},
{R_D6_B_CHROMA_SATURATION_CNTL,1,
"Task B: Chrominance saturation control"},
/* 0xd7 - Reserved */
/* Task B: Horizontal phase scaling */
{R_D8_B_HORIZ_LUMA_SCALING_INC,2,
"Task B: Horizontal luminance scaling increment"},
{R_DA_B_HORIZ_LUMA_PHASE_OFF,1,
"Task B: Horizontal luminance phase offset"},
/* 0xdb - Reserved */
{R_DC_B_HORIZ_CHROMA_SCALING,2,
"Task B: Horizontal chrominance scaling"},
{R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA,1,
"Task B: Horizontal Phase Offset Chroma"},
/* 0xdf - Reserved */
/* Task B: Vertical scaling */
{R_E0_B_VERT_LUMA_SCALING_INC,2,
"Task B: Vertical luminance scaling increment"},
{R_E2_B_VERT_CHROMA_SCALING_INC,2,
"Task B: Vertical chrominance scaling increment"},
{R_E4_B_VERT_SCALING_MODE_CNTL,1,
"Task B: Vertical scaling mode control"},
/* 0xe5-0xe7 - Reserved */
{R_E8_B_VERT_CHROMA_PHASE_OFF_00,1,
"Task B: Vertical chrominance phase offset '00'"},
{R_E9_B_VERT_CHROMA_PHASE_OFF_01,1,
"Task B: Vertical chrominance phase offset '01'"},
{R_EA_B_VERT_CHROMA_PHASE_OFF_10,1,
"Task B: Vertical chrominance phase offset '10'"},
{R_EB_B_VERT_CHROMA_PHASE_OFF_11,1,
"Task B: Vertical chrominance phase offset '11'"},
{R_EC_B_VERT_LUMA_PHASE_OFF_00,1,
"Task B: Vertical luminance phase offset '00'"},
{R_ED_B_VERT_LUMA_PHASE_OFF_01,1,
"Task B: Vertical luminance phase offset '01'"},
{R_EE_B_VERT_LUMA_PHASE_OFF_10,1,
"Task B: Vertical luminance phase offset '10'"},
{R_EF_B_VERT_LUMA_PHASE_OFF_11,1,
"Task B: Vertical luminance phase offset '11'"},
/* second PLL (PLL2) and Pulsegenerator Programming */
{ R_F0_LFCO_PER_LINE, 1,
"LFCO's per line"},
{ R_F1_P_I_PARAM_SELECT,1,
"P-/I- Param. Select., PLL Mode, PLL H-Src., LFCO's per line"},
{ R_F2_NOMINAL_PLL2_DTO,1,
"Nominal PLL2 DTO"},
{R_F3_PLL_INCREMENT,1,
"PLL2 Increment"},
{R_F4_PLL2_STATUS,1,
"PLL2 Status"},
{R_F5_PULSGEN_LINE_LENGTH,1,
"Pulsgen. line length"},
{R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG,1,
"Pulse A Position, Pulsgen Resync., Pulsgen. H-Src., Pulsgen. line length"},
{R_F7_PULSE_A_POS_MSB,1,
"Pulse A Position"},
{R_F8_PULSE_B_POS,2,
"Pulse B Position"},
{R_FA_PULSE_C_POS,2,
"Pulse C Position"},
/* 0xfc to 0xfe - Reserved */
{R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES,1,
"S_PLL max. phase, error threshold, PLL2 no. of lines, threshold"},
};
#endif
Copy Permalink