renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
Code
612e1d5f1c
linux-next/arch/arm/boot/dts/db8500.dtsi

563 lines
13 KiB
Plaintext
Raw Normal View History

ARM: ux500: split dts file for snowball into generic part db8500.dtsi can be used by all systems with a db8500 or db9500 SoC, while snowball.dts is board specific. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-03 07:07:21 +08:00
/*
* Copyright 2012 Linaro Ltd
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
soc-u9500 {
#address-cells = <1>;
#size-cells = <1>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
compatible = "stericsson,db8500";
ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree This enables the embedded GIC on all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-08 01:22:30 +08:00
interrupt-parent = <&intc>;
ARM: ux500: split dts file for snowball into generic part db8500.dtsi can be used by all systems with a db8500 or db9500 SoC, while snowball.dts is board specific. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-03 07:07:21 +08:00
ranges;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree This enables the embedded GIC on all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-08 01:22:30 +08:00
intc: interrupt-controller@a0411000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0xa0411000 0x1000>,
<0xa0410100 0x100>;
};
ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree This provides PL310 Level 2 Cache Controller Device Tree support for all u8500 based devices. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-08 17:02:02 +08:00
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xa0412000 0x1000>;
interrupts = <0 13 4>;
cache-unified;
cache-level = <2>;
};
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 7 0x4>;
};
ARM: ux500: Provide local timer support for Device Tree This enables local timer (AKA: private timer) support for all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 17:53:24 +08:00
timer@a0410600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xa0410600 0x20>;
interrupts = <1 13 0x304>;
};
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
rtc@80154000 {
ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled During a Device Tree boot, all probing will now be completed on parse of the Device Tree binary. In the same patch we remove platform registration of the Real Time Clock. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-26 14:01:31 +08:00
compatible = "arm,rtc-pl031", "arm,primecell";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x80154000 0x1000>;
interrupts = <0 18 0x4>;
};
gpio0: gpio@8012e000 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:03 +08:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x8012e000 0x80>;
interrupts = <0 119 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:17:36 +08:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
supports-sleepmode;
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:05 +08:00
#gpio-cells = <2>;
gpio-bank = <0>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
gpio1: gpio@8012e080 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:03 +08:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x8012e080 0x80>;
interrupts = <0 120 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:17:36 +08:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
supports-sleepmode;
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:05 +08:00
#gpio-cells = <2>;
gpio-bank = <1>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
gpio2: gpio@8000e000 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:03 +08:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x8000e000 0x80>;
interrupts = <0 121 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:17:36 +08:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
supports-sleepmode;
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:05 +08:00
#gpio-cells = <2>;
gpio-bank = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
gpio3: gpio@8000e080 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:03 +08:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x8000e080 0x80>;
interrupts = <0 122 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:17:36 +08:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
supports-sleepmode;
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:05 +08:00
#gpio-cells = <2>;
gpio-bank = <3>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
gpio4: gpio@8000e100 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:03 +08:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x8000e100 0x80>;
interrupts = <0 123 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:17:36 +08:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
supports-sleepmode;
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:05 +08:00
#gpio-cells = <2>;
gpio-bank = <4>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
gpio5: gpio@8000e180 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:03 +08:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x8000e180 0x80>;
interrupts = <0 124 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:17:36 +08:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
supports-sleepmode;
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:05 +08:00
#gpio-cells = <2>;
gpio-bank = <5>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
gpio6: gpio@8011e000 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:03 +08:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x8011e000 0x80>;
interrupts = <0 125 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:17:36 +08:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
supports-sleepmode;
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:05 +08:00
#gpio-cells = <2>;
gpio-bank = <6>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
gpio7: gpio@8011e080 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:03 +08:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x8011e080 0x80>;
interrupts = <0 126 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:17:36 +08:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
supports-sleepmode;
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:05 +08:00
#gpio-cells = <2>;
gpio-bank = <7>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
gpio8: gpio@a03fe000 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:03 +08:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0xa03fe000 0x80>;
interrupts = <0 127 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:17:36 +08:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
supports-sleepmode;
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:05 +08:00
#gpio-cells = <2>;
gpio-bank = <8>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
ARM: ux500: Enable probing of pinctrl through Device Tree The Nomadik GPIO controller now relies on Nomadik pinctrl, however the pinctrl driver is not currently started by any ux500 platform. This is requred or GPIOs do not work at all. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-26 13:25:36 +08:00
pinctrl {
compatible = "stericsson,nmk_pinctrl";
};
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
usb@a03e0000 {
compatible = "stericsson,db8500-musb",
"mentor,musb";
reg = <0xa03e0000 0x10000>;
interrupts = <0 23 0x4>;
};
dma-controller@801C0000 {
compatible = "stericsson,db8500-dma40",
"stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>;
interrupts = <0 25 0x4>;
};
prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
reg = <0x80157000 0x1000>;
ARM: ux500: PRCMU related configuration and layout corrections for Device Tree Apply db8500 related PRCMU Device Tree settings and clean up some formatting errors. We also remove one of the PRCMU assigned IRQs, as it is currently not used. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-28 16:50:49 +08:00
interrupts = <0 47 0x4>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
#address-cells = <1>;
ARM: ux500: Configure the PRCMU Timer for db8500 based devices in DT This patch adds the information required for successful registration of the PRCMU timer 4 (clocksource) driver to the db8500 Device Tree include file. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24 17:00:15 +08:00
#size-cells = <1>;
ranges;
ARM: ux500: PRCMU related configuration and layout corrections for Device Tree Apply db8500 related PRCMU Device Tree settings and clean up some formatting errors. We also remove one of the PRCMU assigned IRQs, as it is currently not used. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-28 16:50:49 +08:00
prcmu-timer-4@80157450 {
ARM: ux500: Configure the PRCMU Timer for db8500 based devices in DT This patch adds the information required for successful registration of the PRCMU timer 4 (clocksource) driver to the db8500 Device Tree include file. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24 17:00:15 +08:00
compatible = "stericsson,db8500-prcmu-timer-4";
reg = <0x80157450 0xC>;
};
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 20:32:34 +08:00
db8500-prcmu-regulators {
compatible = "stericsson,db8500-prcmu-regulator";
// DB8500_REGULATOR_VAPE
db8500_vape_reg: db8500_vape {
regulator-name = "db8500-vape";
regulator-always-on;
};
// DB8500_REGULATOR_VARM
db8500_varm_reg: db8500_varm {
regulator-name = "db8500-varm";
};
// DB8500_REGULATOR_VMODEM
db8500_vmodem_reg: db8500_vmodem {
regulator-name = "db8500-vmodem";
};
// DB8500_REGULATOR_VPLL
db8500_vpll_reg: db8500_vpll {
regulator-name = "db8500-vpll";
};
// DB8500_REGULATOR_VSMPS1
db8500_vsmps1_reg: db8500_vsmps1 {
regulator-name = "db8500-vsmps1";
};
// DB8500_REGULATOR_VSMPS2
db8500_vsmps2_reg: db8500_vsmps2 {
regulator-name = "db8500-vsmps2";
};
// DB8500_REGULATOR_VSMPS3
db8500_vsmps3_reg: db8500_vsmps3 {
regulator-name = "db8500-vsmps3";
};
// DB8500_REGULATOR_VRF1
db8500_vrf1_reg: db8500_vrf1 {
regulator-name = "db8500-vrf1";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSP
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
regulator-name = "db8500-sva-mmdsp";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
regulator-name = "db8500-sva-mmdsp-ret";
};
// DB8500_REGULATOR_SWITCH_SVAPIPE
db8500_sva_pipe_reg: db8500_sva_pipe {
regulator-name = "db8500_sva_pipe";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSP
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
regulator-name = "db8500_sia_mmdsp";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
regulator-name = "db8500-sia-mmdsp-ret";
};
// DB8500_REGULATOR_SWITCH_SIAPIPE
db8500_sia_pipe_reg: db8500_sia_pipe {
regulator-name = "db8500-sia-pipe";
};
// DB8500_REGULATOR_SWITCH_SGA
db8500_sga_reg: db8500_sga {
regulator-name = "db8500-sga";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
regulator-name = "db8500-b2r2-mcde";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_ESRAM12
db8500_esram12_reg: db8500_esram12 {
regulator-name = "db8500-esram12";
};
// DB8500_REGULATOR_SWITCH_ESRAM12RET
db8500_esram12_ret_reg: db8500_esram12_ret {
regulator-name = "db8500-esram12-ret";
};
// DB8500_REGULATOR_SWITCH_ESRAM34
db8500_esram34_reg: db8500_esram34 {
regulator-name = "db8500-esram34";
};
// DB8500_REGULATOR_SWITCH_ESRAM34RET
db8500_esram34_ret_reg: db8500_esram34_ret {
regulator-name = "db8500-esram34-ret";
};
};
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
ab8500@5 {
compatible = "stericsson,ab8500";
reg = <5>; /* mailbox 5 is i2c */
interrupts = <0 40 0x4>;
ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree The AB8500 driver has now been provided with IRQ domain support. This means we can request IRQs from any of it's uses via Device Tree. This patch advertises the AB8500 as an Interrupt Controller and provides the correct calls in the format the driver expects. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-29 10:49:33 +08:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:29:53 +08:00
ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices Here we add a node for the AB8500 Real Time Clock in all devices supporting the DB8500. The AB8500 RTC driver makes use of named interrupts we provide support for this too. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-26 14:03:48 +08:00
ab8500-rtc {
compatible = "stericsson,ab8500-rtc";
interrupts = <17 0x4
18 0x4>;
interrupt-names = "60S", "ALARM";
};
ARM: ux500: Add a ab8500-gpadc node to the db8500 Device Tree This patch provides support for the ab8500-gpadc driver. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-28 16:59:26 +08:00
ab8500-gpadc {
compatible = "stericsson,ab8500-gpadc";
ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree The AB8500 driver has now been provided with IRQ domain support. This means we can request IRQs from any of it's uses via Device Tree. This patch advertises the AB8500 as an Interrupt Controller and provides the correct calls in the format the driver expects. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-29 10:49:33 +08:00
interrupts = <32 0x4
39 0x4>;
ARM: ux500: Add a ab8500-gpadc node to the db8500 Device Tree This patch provides support for the ab8500-gpadc driver. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-28 16:59:26 +08:00
interrupt-names = "HW_CONV_END", "SW_CONV_END";
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices Here we specify each of the ab8500 USB driver's seven IRQs, which the driver references by name. We also apply regulator support for the three used by the device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-03 21:40:24 +08:00
ab8500-usb {
compatible = "stericsson,ab8500-usb";
ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree The AB8500 driver has now been provided with IRQ domain support. This means we can request IRQs from any of it's uses via Device Tree. This patch advertises the AB8500 as an Interrupt Controller and provides the correct calls in the format the driver expects. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-29 10:49:33 +08:00
interrupts = < 90 0x4
96 0x4
14 0x4
15 0x4
79 0x4
74 0x4
75 0x4>;
ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices Here we specify each of the ab8500 USB driver's seven IRQs, which the driver references by name. We also apply regulator support for the three used by the device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-03 21:40:24 +08:00
interrupt-names = "ID_WAKEUP_R",
"ID_WAKEUP_F",
"VBUS_DET_F",
"VBUS_DET_R",
"USB_LINK_STATUS",
"USB_ADP_PROBE_PLUG",
"USB_ADP_PROBE_UNPLUG";
vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
v-ape-supply = <&db8500_vape_reg>;
musb_1v8-supply = <&db8500_vsmps2_reg>;
};
ARM: ux500: Add support for input/ponkey into the db8500's Device Tree Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-02 15:45:40 +08:00
ab8500-ponkey {
compatible = "stericsson,ab8500-ponkey";
ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree The AB8500 driver has now been provided with IRQ domain support. This means we can request IRQs from any of it's uses via Device Tree. This patch advertises the AB8500 as an Interrupt Controller and provides the correct calls in the format the driver expects. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-29 10:49:33 +08:00
interrupts = <6 0x4
7 0x4>;
ARM: ux500: Add support for input/ponkey into the db8500's Device Tree Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-02 15:45:40 +08:00
interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
};
ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl This adds the DT node for the mfd/ab8500-sysctrl driver. It will allow probing of the driver during a Device Tree enabled boot. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-03 19:53:55 +08:00
ab8500-sysctrl {
compatible = "stericsson,ab8500-sysctrl";
};
ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm This adds the DT node for the misc/ab8500-pwm driver. It will allow probing of the driver during a Device Tree enabled boot. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-03 20:03:59 +08:00
ab8500-pwm {
compatible = "stericsson,ab8500-pwm";
};
ARM: ux500: Apply ab8500-debug node do the db8500 DT structure This node has no properties. It merely allows probing of the ab8500-debugfs driver during Device Tree initialisation. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-01 23:11:19 +08:00
ab8500-debugfs {
compatible = "stericsson,ab8500-debug";
};
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:29:53 +08:00
ab8500-regulators {
compatible = "stericsson,ab8500-regulator";
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
/* BUG: If turned off MMC will be affected. */
regulator-always-on;
};
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-name = "V-eMMC1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-name = "V-MMC-SD";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for v-intcore12; VINTCORE12 LDO
ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
regulator-name = "V-INTCORE";
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-name = "V-TVOUT";
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
regulator-name = "dummy";
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-name = "V-AUD";
};
// supply for v-anamic1 VAMic1-LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-name = "V-AMIC1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
regulator-name = "V-AMIC2";
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-name = "V-DMIC";
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-name = "V-CSI/DSI";
};
};
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
};
i2c@80004000 {
ARM: ux500: Shorten Snowball's DT compatible gpio entry It is believed that the gpio compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:04 +08:00
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x80004000 0x1000>;
interrupts = <0 21 0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@80122000 {
ARM: ux500: Shorten Snowball's DT compatible gpio entry It is believed that the gpio compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:04 +08:00
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x80122000 0x1000>;
interrupts = <0 22 0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@80128000 {
ARM: ux500: Shorten Snowball's DT compatible gpio entry It is believed that the gpio compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:04 +08:00
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x80128000 0x1000>;
interrupts = <0 55 0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@80110000 {
ARM: ux500: Shorten Snowball's DT compatible gpio entry It is believed that the gpio compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:04 +08:00
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x80110000 0x1000>;
interrupts = <0 12 0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@8012a000 {
ARM: ux500: Shorten Snowball's DT compatible gpio entry It is believed that the gpio compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 22:05:04 +08:00
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
reg = <0x8012a000 0x1000>;
interrupts = <0 51 0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
ssp@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <80002000 0x1000>;
interrupts = <0 14 0x4>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ARM: ux500: Enable PL022 SSP Controller in Device Tree This SSP Controller supports a number of serial communication methods and as such cannot be registered using of_register_spi_devices. Instead we register it simply as a primecell device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:47:11 +08:00
// Add one of these for each child device
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 14:17:36 +08:00
cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
&gpio6 22 0x4 &gpio7 0 0x4>;
ARM: ux500: Enable PL022 SSP Controller in Device Tree This SSP Controller supports a number of serial communication methods and as such cannot be registered using of_register_spi_devices. Instead we register it simply as a primecell device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:47:11 +08:00
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 00:46:17 +08:00
};
uart@80120000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80120000 0x1000>;
interrupts = <0 11 0x4>;
status = "disabled";
};
uart@80121000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80121000 0x1000>;
interrupts = <0 19 0x4>;
status = "disabled";
};
uart@80007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80007000 0x1000>;
interrupts = <0 26 0x4>;
status = "disabled";
};
sdi@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <0 60 0x4>;
status = "disabled";
};
sdi@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 0x4>;
status = "disabled";
};
sdi@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
sdi@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
sdi@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
sdi@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 100 0x4>;
status = "disabled";
};
ARM: ux500: Enable the SMSC9115 on Snowball via Device Tree Here we split the description of the external-bus@50000000 over two description files. In the more generic db8500 description file we only specify the external-bus. Normally this would be used to communicate with a NOR-flash device. On the Snowball however, the SMSC9115 Ethernet chip occupies it. In the Snowball board specific description file is where we actually specify that it is in fact the Ethernet device which lives here. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24 17:53:18 +08:00
external-bus@50000000 {
compatible = "simple-bus";
reg = <0x50000000 0x4000000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x50000000 0x4000000>;
status = "disabled";
};
ARM: ux500: split dts file for snowball into generic part db8500.dtsi can be used by all systems with a db8500 or db9500 SoC, while snowball.dts is board specific. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-03 07:07:21 +08:00
};
};
Copy Permalink