linux-next/include/linux/i2c-omap.h

#ifndef __I2C_OMAP_H__
#define __I2C_OMAP_H__

#include <linux/platform_device.h>

struct omap_i2c_bus_platform_data {
	u32		clkrate;
	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
	int		(*device_enable) (struct platform_device *pdev);
	int		(*device_shutdown) (struct platform_device *pdev);
	int		(*device_idle) (struct platform_device *pdev);
};

#endif
i2c-omap: add mpu wake up latency constraint in i2c While waiting for completion of the i2c transfer, the MPU could hit OFF mode and cause several msecs of delay that made i2c transfers fail more often. The extra delays and subsequent re-trys cause i2c clocks to be active more often. This has also an negative effect on power consumption. Created a mechanism for passing and using the constraint setting function in driver code. The used mpu wake up latency constraints are now set individually per bus, and they are calculated based on clock rate and fifo size. Thanks to Jarkko Nikula, Moiz Sonasath, Paul Walmsley, and Nishanth Menon for tuning out the details of this patch. Updates by Kevin as requested by Tony: - Remove omap_set_i2c_constraint_func() in favor of conditionally adding the flag in omap_i2c_add_bus() in order to keep all the OMAP conditional checking in a single location. - Update set_mpu_wkup_lat prototypes to match OMAP PM layer so OMAP PM function can be used directly in pdata. Cc: Moiz Sonasath <m-sonasath@ti.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-12 02:35:08 +08:00			`#ifndef __I2C_OMAP_H__`
			`#define __I2C_OMAP_H__`

OMAP: I2C: split device registration and convert OMAP2+ to omap_device Split the OMAP1 and OMAP2+ platform_device build and register code. Convert the OMAP2+ variant to use omap_device. This patch was developed in collaboration with Rajendra Nayak <rnayak@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> 2010-09-21 22:07:15 +08:00			`#include <linux/platform_device.h>`

i2c-omap: add mpu wake up latency constraint in i2c While waiting for completion of the i2c transfer, the MPU could hit OFF mode and cause several msecs of delay that made i2c transfers fail more often. The extra delays and subsequent re-trys cause i2c clocks to be active more often. This has also an negative effect on power consumption. Created a mechanism for passing and using the constraint setting function in driver code. The used mpu wake up latency constraints are now set individually per bus, and they are calculated based on clock rate and fifo size. Thanks to Jarkko Nikula, Moiz Sonasath, Paul Walmsley, and Nishanth Menon for tuning out the details of this patch. Updates by Kevin as requested by Tony: - Remove omap_set_i2c_constraint_func() in favor of conditionally adding the flag in omap_i2c_add_bus() in order to keep all the OMAP conditional checking in a single location. - Update set_mpu_wkup_lat prototypes to match OMAP PM layer so OMAP PM function can be used directly in pdata. Cc: Moiz Sonasath <m-sonasath@ti.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-12 02:35:08 +08:00			`struct omap_i2c_bus_platform_data {`
			`u32 clkrate;`
			`void (set_mpu_wkup_lat)(struct device dev, long set);`
OMAP: I2C: split device registration and convert OMAP2+ to omap_device Split the OMAP1 and OMAP2+ platform_device build and register code. Convert the OMAP2+ variant to use omap_device. This patch was developed in collaboration with Rajendra Nayak <rnayak@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> 2010-09-21 22:07:15 +08:00			`int (device_enable) (struct platform_device pdev);`
			`int (device_shutdown) (struct platform_device pdev);`
			`int (device_idle) (struct platform_device pdev);`
i2c-omap: add mpu wake up latency constraint in i2c While waiting for completion of the i2c transfer, the MPU could hit OFF mode and cause several msecs of delay that made i2c transfers fail more often. The extra delays and subsequent re-trys cause i2c clocks to be active more often. This has also an negative effect on power consumption. Created a mechanism for passing and using the constraint setting function in driver code. The used mpu wake up latency constraints are now set individually per bus, and they are calculated based on clock rate and fifo size. Thanks to Jarkko Nikula, Moiz Sonasath, Paul Walmsley, and Nishanth Menon for tuning out the details of this patch. Updates by Kevin as requested by Tony: - Remove omap_set_i2c_constraint_func() in favor of conditionally adding the flag in omap_i2c_add_bus() in order to keep all the OMAP conditional checking in a single location. - Update set_mpu_wkup_lat prototypes to match OMAP PM layer so OMAP PM function can be used directly in pdata. Cc: Moiz Sonasath <m-sonasath@ti.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-12 02:35:08 +08:00			`};`

			`#endif`