2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 22:53:55 +08:00
linux-next/drivers/usb/gadget/Makefile

74 lines
2.4 KiB
Makefile
Raw Normal View History

#
# USB peripheral controller drivers
#
ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
obj-$(CONFIG_USB_GADGET) += udc-core.o
obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
USB: net2272: driver for PLX NET2272 USB device controller This is based on the last release from PLX: http://www.plxtech.com/files/products/net2000/software/selectiontool/RE061204-net2272-linux2.6.18.tgz I've managed to contact them and they've confirmed that this driver was wholly written by PLX (Seth Levy). While they have no problem with it being merged (and they've already licensed it as GPL), they don't have any interest in doing so themselves as this is an old part for them. ADI has long had an add-on card which has this part on it, so we've been keeping it up-to-date out of tree. But now that PLX has confirmed the source of the driver, we can can take the next step of cleaning it up and getting it merged. So here we are! I've done quite a large clean up of the driver and attempted to address all the common issues. Hopefully in the process, I haven't broken anything. While it seems to still work with the board that I have access to, it is not a PCI variant. So I have not tested any of the PCI logic myself (beyond clean compile). Perhaps someone who actually has a card and cares can do so. I'll try to address further feedback, but don't expect miracles. I'm not really familiar with the part itself, just the platform glue. Signed-off-by: Seth Levy <seth.levy@plxtech.com> Signed-off-by: Ash Aziz <ash.aziz@plxtech.com> Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 07:42:44 +08:00
obj-$(CONFIG_USB_NET2272) += net2272.o
obj-$(CONFIG_USB_NET2280) += net2280.o
obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o
obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o
obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o
obj-$(CONFIG_USB_IMX) += imx_udc.o
obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
obj-$(CONFIG_USB_AT91) += at91_udc.o
obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
fsl_usb2_udc-y := fsl_udc_core.o
fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o
obj-$(CONFIG_USB_M66592) += m66592-udc.o
obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o
obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
obj-$(CONFIG_USB_CI13XXX_PCI) += ci13xxx_pci.o
obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o
obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
obj-$(CONFIG_USB_LANGWELL) += langwell_udc.o
obj-$(CONFIG_USB_EG20T) += pch_udc.o
obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
mv_udc-y := mv_udc_core.o
obj-$(CONFIG_USB_CI13XXX_MSM) += ci13xxx_msm.o
obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
#
# USB gadget drivers
#
g_zero-y := zero.o
g_audio-y := audio.o
g_ether-y := ether.o
g_serial-y := serial.o
g_midi-y := gmidi.o
gadgetfs-y := inode.o
g_file_storage-y := file_storage.o
g_mass_storage-y := mass_storage.o
g_printer-y := printer.o
g_cdc-y := cdc2.o
g_multi-y := multi.o
g_hid-y := hid.o
g_dbgp-y := dbgp.o
g_nokia-y := nokia.o
g_webcam-y := webcam.o
g_ncm-y := ncm.o
g_acm_ms-y := acm_ms.o
obj-$(CONFIG_USB_ZERO) += g_zero.o
obj-$(CONFIG_USB_AUDIO) += g_audio.o
obj-$(CONFIG_USB_ETH) += g_ether.o
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o
obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o
obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
obj-$(CONFIG_USB_G_PRINTER) += g_printer.o
obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o
usb gadget: new "CDC Composite" gadget driver This is a simple example of a composite gadget, combining two Communications Class Device (CDC) functions: ECM and ACM. This provides a clear example of how the composite gadget framework is intended to work. It's surprising that MS-Windows (or at least, XP and previous) won't "just work" with something this simple... One /proc/bus/usb/devices listing looks like: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 46 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0525 ProdID=a4aa Rev= 3.01 S: Manufacturer=Linux 2.6.26-rc6-pnut with net2280 S: Product=CDC Composite Gadget C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Not all USB peripheral controller hardware can support this driver. All the highspeed-capable peripheral controllers with drivers now in the mainline kernel seem to support this, as does omap_udc. But many full speed controllers don't have enough endpoints, or (as with the PXA controllers) don't support altsettings. Lightly tested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-20 09:20:26 +08:00
obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
obj-$(CONFIG_USB_G_HID) += g_hid.o
obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o
obj-$(CONFIG_USB_G_MULTI) += g_multi.o
obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o
obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o
obj-$(CONFIG_USB_G_NCM) += g_ncm.o
obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o