renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
Code
5d7c20b7fa
linux-next/include/linux/thread_info.h

129 lines
3.4 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* thread_info.h: common low-level thread information accessors
*
* Copyright (C) 2002 David Howells (dhowells@redhat.com)
* - Incorporating suggestions made by Linus Torvalds
*/
#ifndef _LINUX_THREAD_INFO_H
#define _LINUX_THREAD_INFO_H
futex: fix for futex_wait signal stack corruption David Holmes found a bug in the -rt tree with respect to pthread_cond_timedwait. After trying his test program on the latest git from mainline, I found the bug was there too. The bug he was seeing that his test program showed, was that if one were to do a "Ctrl-Z" on a process that was in the pthread_cond_timedwait, and then did a "bg" on that process, it would return with a "-ETIMEDOUT" but early. That is, the timer would go off early. Looking into this, I found the source of the problem. And it is a rather nasty bug at that. Here's the relevant code from kernel/futex.c: (not in order in the file) [...] smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val, struct timespec __user *utime, u32 __user *uaddr2, u32 val3) { struct timespec ts; ktime_t t, *tp = NULL; u32 val2 = 0; int cmd = op & FUTEX_CMD_MASK; if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) { if (copy_from_user(&ts, utime, sizeof(ts)) != 0) return -EFAULT; if (!timespec_valid(&ts)) return -EINVAL; t = timespec_to_ktime(ts); if (cmd == FUTEX_WAIT) t = ktime_add(ktime_get(), t); tp = &t; } [...] return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); } [...] long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) { int ret; int cmd = op & FUTEX_CMD_MASK; struct rw_semaphore *fshared = NULL; if (!(op & FUTEX_PRIVATE_FLAG)) fshared = &current->mm->mmap_sem; switch (cmd) { case FUTEX_WAIT: ret = futex_wait(uaddr, fshared, val, timeout); [...] static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared, u32 val, ktime_t *abs_time) { [...] struct restart_block *restart; restart = &current_thread_info()->restart_block; restart->fn = futex_wait_restart; restart->arg0 = (unsigned long)uaddr; restart->arg1 = (unsigned long)val; restart->arg2 = (unsigned long)abs_time; restart->arg3 = 0; if (fshared) restart->arg3 |= ARG3_SHARED; return -ERESTART_RESTARTBLOCK; [...] static long futex_wait_restart(struct restart_block *restart) { u32 __user *uaddr = (u32 __user *)restart->arg0; u32 val = (u32)restart->arg1; ktime_t *abs_time = (ktime_t *)restart->arg2; struct rw_semaphore *fshared = NULL; restart->fn = do_no_restart_syscall; if (restart->arg3 & ARG3_SHARED) fshared = &current->mm->mmap_sem; return (long)futex_wait(uaddr, fshared, val, abs_time); } So when the futex_wait is interrupt by a signal we break out of the hrtimer code and set up or return from signal. This code does not return back to userspace, so we set up a RESTARTBLOCK. The bug here is that we save the "abs_time" which is a pointer to the stack variable "ktime_t t" from sys_futex. This returns and unwinds the stack before we get to call our signal. On return from the signal we go to futex_wait_restart, where we update all the parameters for futex_wait and call it. But here we have a problem where abs_time is no longer valid. I verified this with print statements, and sure enough, what abs_time was set to ends up being garbage when we get to futex_wait_restart. The solution I did to solve this (with input from Linus Torvalds) was to add unions to the restart_block to allow system calls to use the restart with specific parameters. This way the futex code now saves the time in a 64bit value in the restart block instead of storing it on the stack. Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64 in thread_info.h, when there's a #ifdef __KERNEL__ just below that. Not sure what that is there for. If this turns out to be a problem, I've tested this with using "unsigned int" for u32 and "unsigned long long" for u64 and it worked just the same. I'm using u32 and u64 just to be consistent with what the futex code uses. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 22:46:09 +08:00
#include <linux/types.h>
hrtimer: add nanosleep specific restart_block member The back and forth typecasting of restart_block->args is horrible. We added a separate union member for futex already. Do the same for nanosleep. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-10 16:04:12 +08:00
struct timespec;
struct compat_timespec;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
futex: fix for futex_wait signal stack corruption David Holmes found a bug in the -rt tree with respect to pthread_cond_timedwait. After trying his test program on the latest git from mainline, I found the bug was there too. The bug he was seeing that his test program showed, was that if one were to do a "Ctrl-Z" on a process that was in the pthread_cond_timedwait, and then did a "bg" on that process, it would return with a "-ETIMEDOUT" but early. That is, the timer would go off early. Looking into this, I found the source of the problem. And it is a rather nasty bug at that. Here's the relevant code from kernel/futex.c: (not in order in the file) [...] smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val, struct timespec __user *utime, u32 __user *uaddr2, u32 val3) { struct timespec ts; ktime_t t, *tp = NULL; u32 val2 = 0; int cmd = op & FUTEX_CMD_MASK; if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) { if (copy_from_user(&ts, utime, sizeof(ts)) != 0) return -EFAULT; if (!timespec_valid(&ts)) return -EINVAL; t = timespec_to_ktime(ts); if (cmd == FUTEX_WAIT) t = ktime_add(ktime_get(), t); tp = &t; } [...] return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); } [...] long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) { int ret; int cmd = op & FUTEX_CMD_MASK; struct rw_semaphore *fshared = NULL; if (!(op & FUTEX_PRIVATE_FLAG)) fshared = &current->mm->mmap_sem; switch (cmd) { case FUTEX_WAIT: ret = futex_wait(uaddr, fshared, val, timeout); [...] static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared, u32 val, ktime_t *abs_time) { [...] struct restart_block *restart; restart = &current_thread_info()->restart_block; restart->fn = futex_wait_restart; restart->arg0 = (unsigned long)uaddr; restart->arg1 = (unsigned long)val; restart->arg2 = (unsigned long)abs_time; restart->arg3 = 0; if (fshared) restart->arg3 |= ARG3_SHARED; return -ERESTART_RESTARTBLOCK; [...] static long futex_wait_restart(struct restart_block *restart) { u32 __user *uaddr = (u32 __user *)restart->arg0; u32 val = (u32)restart->arg1; ktime_t *abs_time = (ktime_t *)restart->arg2; struct rw_semaphore *fshared = NULL; restart->fn = do_no_restart_syscall; if (restart->arg3 & ARG3_SHARED) fshared = &current->mm->mmap_sem; return (long)futex_wait(uaddr, fshared, val, abs_time); } So when the futex_wait is interrupt by a signal we break out of the hrtimer code and set up or return from signal. This code does not return back to userspace, so we set up a RESTARTBLOCK. The bug here is that we save the "abs_time" which is a pointer to the stack variable "ktime_t t" from sys_futex. This returns and unwinds the stack before we get to call our signal. On return from the signal we go to futex_wait_restart, where we update all the parameters for futex_wait and call it. But here we have a problem where abs_time is no longer valid. I verified this with print statements, and sure enough, what abs_time was set to ends up being garbage when we get to futex_wait_restart. The solution I did to solve this (with input from Linus Torvalds) was to add unions to the restart_block to allow system calls to use the restart with specific parameters. This way the futex code now saves the time in a 64bit value in the restart block instead of storing it on the stack. Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64 in thread_info.h, when there's a #ifdef __KERNEL__ just below that. Not sure what that is there for. If this turns out to be a problem, I've tested this with using "unsigned int" for u32 and "unsigned long long" for u64 and it worked just the same. I'm using u32 and u64 just to be consistent with what the futex code uses. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 22:46:09 +08:00
* System call restart block.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
struct restart_block {
long (*fn)(struct restart_block *);
futex: fix for futex_wait signal stack corruption David Holmes found a bug in the -rt tree with respect to pthread_cond_timedwait. After trying his test program on the latest git from mainline, I found the bug was there too. The bug he was seeing that his test program showed, was that if one were to do a "Ctrl-Z" on a process that was in the pthread_cond_timedwait, and then did a "bg" on that process, it would return with a "-ETIMEDOUT" but early. That is, the timer would go off early. Looking into this, I found the source of the problem. And it is a rather nasty bug at that. Here's the relevant code from kernel/futex.c: (not in order in the file) [...] smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val, struct timespec __user *utime, u32 __user *uaddr2, u32 val3) { struct timespec ts; ktime_t t, *tp = NULL; u32 val2 = 0; int cmd = op & FUTEX_CMD_MASK; if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) { if (copy_from_user(&ts, utime, sizeof(ts)) != 0) return -EFAULT; if (!timespec_valid(&ts)) return -EINVAL; t = timespec_to_ktime(ts); if (cmd == FUTEX_WAIT) t = ktime_add(ktime_get(), t); tp = &t; } [...] return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); } [...] long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) { int ret; int cmd = op & FUTEX_CMD_MASK; struct rw_semaphore *fshared = NULL; if (!(op & FUTEX_PRIVATE_FLAG)) fshared = &current->mm->mmap_sem; switch (cmd) { case FUTEX_WAIT: ret = futex_wait(uaddr, fshared, val, timeout); [...] static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared, u32 val, ktime_t *abs_time) { [...] struct restart_block *restart; restart = &current_thread_info()->restart_block; restart->fn = futex_wait_restart; restart->arg0 = (unsigned long)uaddr; restart->arg1 = (unsigned long)val; restart->arg2 = (unsigned long)abs_time; restart->arg3 = 0; if (fshared) restart->arg3 |= ARG3_SHARED; return -ERESTART_RESTARTBLOCK; [...] static long futex_wait_restart(struct restart_block *restart) { u32 __user *uaddr = (u32 __user *)restart->arg0; u32 val = (u32)restart->arg1; ktime_t *abs_time = (ktime_t *)restart->arg2; struct rw_semaphore *fshared = NULL; restart->fn = do_no_restart_syscall; if (restart->arg3 & ARG3_SHARED) fshared = &current->mm->mmap_sem; return (long)futex_wait(uaddr, fshared, val, abs_time); } So when the futex_wait is interrupt by a signal we break out of the hrtimer code and set up or return from signal. This code does not return back to userspace, so we set up a RESTARTBLOCK. The bug here is that we save the "abs_time" which is a pointer to the stack variable "ktime_t t" from sys_futex. This returns and unwinds the stack before we get to call our signal. On return from the signal we go to futex_wait_restart, where we update all the parameters for futex_wait and call it. But here we have a problem where abs_time is no longer valid. I verified this with print statements, and sure enough, what abs_time was set to ends up being garbage when we get to futex_wait_restart. The solution I did to solve this (with input from Linus Torvalds) was to add unions to the restart_block to allow system calls to use the restart with specific parameters. This way the futex code now saves the time in a 64bit value in the restart block instead of storing it on the stack. Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64 in thread_info.h, when there's a #ifdef __KERNEL__ just below that. Not sure what that is there for. If this turns out to be a problem, I've tested this with using "unsigned int" for u32 and "unsigned long long" for u64 and it worked just the same. I'm using u32 and u64 just to be consistent with what the futex code uses. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 22:46:09 +08:00
union {
futex: add requeue_pi functionality PI Futexes and their underlying rt_mutex cannot be left ownerless if there are pending waiters as this will break the PI boosting logic, so the standard requeue commands aren't sufficient. The new commands properly manage pi futex ownership by ensuring a futex with waiters has an owner at all times. This will allow glibc to properly handle pi mutexes with pthread_condvars. The approach taken here is to create two new futex op codes: FUTEX_WAIT_REQUEUE_PI: Tasks will use this op code to wait on a futex (such as a non-pi waitqueue) and wake after they have been requeued to a pi futex. Prior to returning to userspace, they will acquire this pi futex (and the underlying rt_mutex). futex_wait_requeue_pi() is the result of a high speed collision between futex_wait() and futex_lock_pi() (with the first part of futex_lock_pi() being done by futex_proxy_trylock_atomic() on behalf of the top_waiter). FUTEX_REQUEUE_PI (and FUTEX_CMP_REQUEUE_PI): This call must be used to wake tasks waiting with FUTEX_WAIT_REQUEUE_PI, regardless of how many tasks the caller intends to wake or requeue. pthread_cond_broadcast() should call this with nr_wake=1 and nr_requeue=INT_MAX. pthread_cond_signal() should call this with nr_wake=1 and nr_requeue=0. The reason being we need both callers to get the benefit of the futex_proxy_trylock_atomic() routine. futex_requeue() also enqueues the top_waiter on the rt_mutex via rt_mutex_start_proxy_lock(). Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-04 04:40:49 +08:00
/* For futex_wait and futex_wait_requeue_pi */
futex: fix for futex_wait signal stack corruption David Holmes found a bug in the -rt tree with respect to pthread_cond_timedwait. After trying his test program on the latest git from mainline, I found the bug was there too. The bug he was seeing that his test program showed, was that if one were to do a "Ctrl-Z" on a process that was in the pthread_cond_timedwait, and then did a "bg" on that process, it would return with a "-ETIMEDOUT" but early. That is, the timer would go off early. Looking into this, I found the source of the problem. And it is a rather nasty bug at that. Here's the relevant code from kernel/futex.c: (not in order in the file) [...] smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val, struct timespec __user *utime, u32 __user *uaddr2, u32 val3) { struct timespec ts; ktime_t t, *tp = NULL; u32 val2 = 0; int cmd = op & FUTEX_CMD_MASK; if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) { if (copy_from_user(&ts, utime, sizeof(ts)) != 0) return -EFAULT; if (!timespec_valid(&ts)) return -EINVAL; t = timespec_to_ktime(ts); if (cmd == FUTEX_WAIT) t = ktime_add(ktime_get(), t); tp = &t; } [...] return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); } [...] long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) { int ret; int cmd = op & FUTEX_CMD_MASK; struct rw_semaphore *fshared = NULL; if (!(op & FUTEX_PRIVATE_FLAG)) fshared = &current->mm->mmap_sem; switch (cmd) { case FUTEX_WAIT: ret = futex_wait(uaddr, fshared, val, timeout); [...] static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared, u32 val, ktime_t *abs_time) { [...] struct restart_block *restart; restart = &current_thread_info()->restart_block; restart->fn = futex_wait_restart; restart->arg0 = (unsigned long)uaddr; restart->arg1 = (unsigned long)val; restart->arg2 = (unsigned long)abs_time; restart->arg3 = 0; if (fshared) restart->arg3 |= ARG3_SHARED; return -ERESTART_RESTARTBLOCK; [...] static long futex_wait_restart(struct restart_block *restart) { u32 __user *uaddr = (u32 __user *)restart->arg0; u32 val = (u32)restart->arg1; ktime_t *abs_time = (ktime_t *)restart->arg2; struct rw_semaphore *fshared = NULL; restart->fn = do_no_restart_syscall; if (restart->arg3 & ARG3_SHARED) fshared = &current->mm->mmap_sem; return (long)futex_wait(uaddr, fshared, val, abs_time); } So when the futex_wait is interrupt by a signal we break out of the hrtimer code and set up or return from signal. This code does not return back to userspace, so we set up a RESTARTBLOCK. The bug here is that we save the "abs_time" which is a pointer to the stack variable "ktime_t t" from sys_futex. This returns and unwinds the stack before we get to call our signal. On return from the signal we go to futex_wait_restart, where we update all the parameters for futex_wait and call it. But here we have a problem where abs_time is no longer valid. I verified this with print statements, and sure enough, what abs_time was set to ends up being garbage when we get to futex_wait_restart. The solution I did to solve this (with input from Linus Torvalds) was to add unions to the restart_block to allow system calls to use the restart with specific parameters. This way the futex code now saves the time in a 64bit value in the restart block instead of storing it on the stack. Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64 in thread_info.h, when there's a #ifdef __KERNEL__ just below that. Not sure what that is there for. If this turns out to be a problem, I've tested this with using "unsigned int" for u32 and "unsigned long long" for u64 and it worked just the same. I'm using u32 and u64 just to be consistent with what the futex code uses. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 22:46:09 +08:00
struct {
futex: Mark restart_block.futex.uaddr[2] __user @uaddr and @uaddr2 fields in restart_block.futex are user pointers. Add __user and remove unnecessary casts. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Darren Hart <dvhltc@us.ibm.com> LKML-Reference: <1284468228-8723-2-git-send-email-namhyung@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-14 20:43:47 +08:00
u32 __user *uaddr;
futex: fix for futex_wait signal stack corruption David Holmes found a bug in the -rt tree with respect to pthread_cond_timedwait. After trying his test program on the latest git from mainline, I found the bug was there too. The bug he was seeing that his test program showed, was that if one were to do a "Ctrl-Z" on a process that was in the pthread_cond_timedwait, and then did a "bg" on that process, it would return with a "-ETIMEDOUT" but early. That is, the timer would go off early. Looking into this, I found the source of the problem. And it is a rather nasty bug at that. Here's the relevant code from kernel/futex.c: (not in order in the file) [...] smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val, struct timespec __user *utime, u32 __user *uaddr2, u32 val3) { struct timespec ts; ktime_t t, *tp = NULL; u32 val2 = 0; int cmd = op & FUTEX_CMD_MASK; if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) { if (copy_from_user(&ts, utime, sizeof(ts)) != 0) return -EFAULT; if (!timespec_valid(&ts)) return -EINVAL; t = timespec_to_ktime(ts); if (cmd == FUTEX_WAIT) t = ktime_add(ktime_get(), t); tp = &t; } [...] return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); } [...] long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) { int ret; int cmd = op & FUTEX_CMD_MASK; struct rw_semaphore *fshared = NULL; if (!(op & FUTEX_PRIVATE_FLAG)) fshared = &current->mm->mmap_sem; switch (cmd) { case FUTEX_WAIT: ret = futex_wait(uaddr, fshared, val, timeout); [...] static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared, u32 val, ktime_t *abs_time) { [...] struct restart_block *restart; restart = &current_thread_info()->restart_block; restart->fn = futex_wait_restart; restart->arg0 = (unsigned long)uaddr; restart->arg1 = (unsigned long)val; restart->arg2 = (unsigned long)abs_time; restart->arg3 = 0; if (fshared) restart->arg3 |= ARG3_SHARED; return -ERESTART_RESTARTBLOCK; [...] static long futex_wait_restart(struct restart_block *restart) { u32 __user *uaddr = (u32 __user *)restart->arg0; u32 val = (u32)restart->arg1; ktime_t *abs_time = (ktime_t *)restart->arg2; struct rw_semaphore *fshared = NULL; restart->fn = do_no_restart_syscall; if (restart->arg3 & ARG3_SHARED) fshared = &current->mm->mmap_sem; return (long)futex_wait(uaddr, fshared, val, abs_time); } So when the futex_wait is interrupt by a signal we break out of the hrtimer code and set up or return from signal. This code does not return back to userspace, so we set up a RESTARTBLOCK. The bug here is that we save the "abs_time" which is a pointer to the stack variable "ktime_t t" from sys_futex. This returns and unwinds the stack before we get to call our signal. On return from the signal we go to futex_wait_restart, where we update all the parameters for futex_wait and call it. But here we have a problem where abs_time is no longer valid. I verified this with print statements, and sure enough, what abs_time was set to ends up being garbage when we get to futex_wait_restart. The solution I did to solve this (with input from Linus Torvalds) was to add unions to the restart_block to allow system calls to use the restart with specific parameters. This way the futex code now saves the time in a 64bit value in the restart block instead of storing it on the stack. Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64 in thread_info.h, when there's a #ifdef __KERNEL__ just below that. Not sure what that is there for. If this turns out to be a problem, I've tested this with using "unsigned int" for u32 and "unsigned long long" for u64 and it worked just the same. I'm using u32 and u64 just to be consistent with what the futex code uses. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 22:46:09 +08:00
u32 val;
u32 flags;
futex: Add bitset conditional wait/wakeup functionality To allow the implementation of optimized rw-locks in user space, glibc needs a possibility to select waiters for wakeup depending on a bitset mask. This requires two new futex OPs: FUTEX_WAIT_BITS and FUTEX_WAKE_BITS These OPs are basically the same as FUTEX_WAIT and FUTEX_WAKE plus an additional argument - a bitset. Further the FUTEX_WAIT_BITS OP is expecting an absolute timeout value instead of the relative one, which is used for the FUTEX_WAIT OP. FUTEX_WAIT_BITS calls into the kernel with a bitset. The bitset is stored in the futex_q structure, which is used to enqueue the waiter into the hashed futex waitqueue. FUTEX_WAKE_BITS also calls into the kernel with a bitset. The wakeup function logically ANDs the bitset with the bitset stored in each waiters futex_q structure. If the result is zero (i.e. none of the set bits in the bitsets is matching), then the waiter is not woken up. If the result is not zero (i.e. one of the set bits in the bitsets is matching), then the waiter is woken. The bitset provided by the caller must be non zero. In case the provided bitset is zero the kernel returns EINVAL. Internaly the new OPs are only extensions to the existing FUTEX_WAIT and FUTEX_WAKE functions. The existing OPs hand a bitset with all bits set into the futex_wait() and futex_wake() functions. Signed-off-by: Thomas Gleixner <tgxl@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-02 00:45:14 +08:00
u32 bitset;
futex: fix for futex_wait signal stack corruption David Holmes found a bug in the -rt tree with respect to pthread_cond_timedwait. After trying his test program on the latest git from mainline, I found the bug was there too. The bug he was seeing that his test program showed, was that if one were to do a "Ctrl-Z" on a process that was in the pthread_cond_timedwait, and then did a "bg" on that process, it would return with a "-ETIMEDOUT" but early. That is, the timer would go off early. Looking into this, I found the source of the problem. And it is a rather nasty bug at that. Here's the relevant code from kernel/futex.c: (not in order in the file) [...] smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val, struct timespec __user *utime, u32 __user *uaddr2, u32 val3) { struct timespec ts; ktime_t t, *tp = NULL; u32 val2 = 0; int cmd = op & FUTEX_CMD_MASK; if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) { if (copy_from_user(&ts, utime, sizeof(ts)) != 0) return -EFAULT; if (!timespec_valid(&ts)) return -EINVAL; t = timespec_to_ktime(ts); if (cmd == FUTEX_WAIT) t = ktime_add(ktime_get(), t); tp = &t; } [...] return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); } [...] long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) { int ret; int cmd = op & FUTEX_CMD_MASK; struct rw_semaphore *fshared = NULL; if (!(op & FUTEX_PRIVATE_FLAG)) fshared = &current->mm->mmap_sem; switch (cmd) { case FUTEX_WAIT: ret = futex_wait(uaddr, fshared, val, timeout); [...] static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared, u32 val, ktime_t *abs_time) { [...] struct restart_block *restart; restart = &current_thread_info()->restart_block; restart->fn = futex_wait_restart; restart->arg0 = (unsigned long)uaddr; restart->arg1 = (unsigned long)val; restart->arg2 = (unsigned long)abs_time; restart->arg3 = 0; if (fshared) restart->arg3 |= ARG3_SHARED; return -ERESTART_RESTARTBLOCK; [...] static long futex_wait_restart(struct restart_block *restart) { u32 __user *uaddr = (u32 __user *)restart->arg0; u32 val = (u32)restart->arg1; ktime_t *abs_time = (ktime_t *)restart->arg2; struct rw_semaphore *fshared = NULL; restart->fn = do_no_restart_syscall; if (restart->arg3 & ARG3_SHARED) fshared = &current->mm->mmap_sem; return (long)futex_wait(uaddr, fshared, val, abs_time); } So when the futex_wait is interrupt by a signal we break out of the hrtimer code and set up or return from signal. This code does not return back to userspace, so we set up a RESTARTBLOCK. The bug here is that we save the "abs_time" which is a pointer to the stack variable "ktime_t t" from sys_futex. This returns and unwinds the stack before we get to call our signal. On return from the signal we go to futex_wait_restart, where we update all the parameters for futex_wait and call it. But here we have a problem where abs_time is no longer valid. I verified this with print statements, and sure enough, what abs_time was set to ends up being garbage when we get to futex_wait_restart. The solution I did to solve this (with input from Linus Torvalds) was to add unions to the restart_block to allow system calls to use the restart with specific parameters. This way the futex code now saves the time in a 64bit value in the restart block instead of storing it on the stack. Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64 in thread_info.h, when there's a #ifdef __KERNEL__ just below that. Not sure what that is there for. If this turns out to be a problem, I've tested this with using "unsigned int" for u32 and "unsigned long long" for u64 and it worked just the same. I'm using u32 and u64 just to be consistent with what the futex code uses. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 22:46:09 +08:00
u64 time;
futex: Mark restart_block.futex.uaddr[2] __user @uaddr and @uaddr2 fields in restart_block.futex are user pointers. Add __user and remove unnecessary casts. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Darren Hart <dvhltc@us.ibm.com> LKML-Reference: <1284468228-8723-2-git-send-email-namhyung@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-14 20:43:47 +08:00
u32 __user *uaddr2;
futex: fix for futex_wait signal stack corruption David Holmes found a bug in the -rt tree with respect to pthread_cond_timedwait. After trying his test program on the latest git from mainline, I found the bug was there too. The bug he was seeing that his test program showed, was that if one were to do a "Ctrl-Z" on a process that was in the pthread_cond_timedwait, and then did a "bg" on that process, it would return with a "-ETIMEDOUT" but early. That is, the timer would go off early. Looking into this, I found the source of the problem. And it is a rather nasty bug at that. Here's the relevant code from kernel/futex.c: (not in order in the file) [...] smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val, struct timespec __user *utime, u32 __user *uaddr2, u32 val3) { struct timespec ts; ktime_t t, *tp = NULL; u32 val2 = 0; int cmd = op & FUTEX_CMD_MASK; if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) { if (copy_from_user(&ts, utime, sizeof(ts)) != 0) return -EFAULT; if (!timespec_valid(&ts)) return -EINVAL; t = timespec_to_ktime(ts); if (cmd == FUTEX_WAIT) t = ktime_add(ktime_get(), t); tp = &t; } [...] return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); } [...] long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) { int ret; int cmd = op & FUTEX_CMD_MASK; struct rw_semaphore *fshared = NULL; if (!(op & FUTEX_PRIVATE_FLAG)) fshared = &current->mm->mmap_sem; switch (cmd) { case FUTEX_WAIT: ret = futex_wait(uaddr, fshared, val, timeout); [...] static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared, u32 val, ktime_t *abs_time) { [...] struct restart_block *restart; restart = &current_thread_info()->restart_block; restart->fn = futex_wait_restart; restart->arg0 = (unsigned long)uaddr; restart->arg1 = (unsigned long)val; restart->arg2 = (unsigned long)abs_time; restart->arg3 = 0; if (fshared) restart->arg3 |= ARG3_SHARED; return -ERESTART_RESTARTBLOCK; [...] static long futex_wait_restart(struct restart_block *restart) { u32 __user *uaddr = (u32 __user *)restart->arg0; u32 val = (u32)restart->arg1; ktime_t *abs_time = (ktime_t *)restart->arg2; struct rw_semaphore *fshared = NULL; restart->fn = do_no_restart_syscall; if (restart->arg3 & ARG3_SHARED) fshared = &current->mm->mmap_sem; return (long)futex_wait(uaddr, fshared, val, abs_time); } So when the futex_wait is interrupt by a signal we break out of the hrtimer code and set up or return from signal. This code does not return back to userspace, so we set up a RESTARTBLOCK. The bug here is that we save the "abs_time" which is a pointer to the stack variable "ktime_t t" from sys_futex. This returns and unwinds the stack before we get to call our signal. On return from the signal we go to futex_wait_restart, where we update all the parameters for futex_wait and call it. But here we have a problem where abs_time is no longer valid. I verified this with print statements, and sure enough, what abs_time was set to ends up being garbage when we get to futex_wait_restart. The solution I did to solve this (with input from Linus Torvalds) was to add unions to the restart_block to allow system calls to use the restart with specific parameters. This way the futex code now saves the time in a 64bit value in the restart block instead of storing it on the stack. Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64 in thread_info.h, when there's a #ifdef __KERNEL__ just below that. Not sure what that is there for. If this turns out to be a problem, I've tested this with using "unsigned int" for u32 and "unsigned long long" for u64 and it worked just the same. I'm using u32 and u64 just to be consistent with what the futex code uses. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 22:46:09 +08:00
} futex;
hrtimer: add nanosleep specific restart_block member The back and forth typecasting of restart_block->args is horrible. We added a separate union member for futex already. Do the same for nanosleep. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-10 16:04:12 +08:00
/* For nanosleep */
struct {
hrtimers: Avoid touching inactive timer bases Instead of iterating over all possible timer bases avoid it by marking the active bases in the cpu base. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2011-05-20 19:05:15 +08:00
clockid_t clockid;
hrtimer: add nanosleep specific restart_block member The back and forth typecasting of restart_block->args is horrible. We added a separate union member for futex already. Do the same for nanosleep. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-10 16:04:12 +08:00
struct timespec __user *rmtp;
#ifdef CONFIG_COMPAT
struct compat_timespec __user *compat_rmtp;
#endif
u64 expires;
} nanosleep;
select: add a poll specific struct to the restart_block union with hrtimer poll/select, the signal restart data no longer is a single long representing a jiffies count, but it becomes a second/nanosecond pair that also needs to encode if there was a timeout at all or not. This patch adds a struct to the restart_block union for this purpose Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-08-31 23:19:15 +08:00
/* For poll */
struct {
struct pollfd __user *ufds;
int nfds;
int has_timeout;
unsigned long tv_sec;
unsigned long tv_nsec;
} poll;
futex: fix for futex_wait signal stack corruption David Holmes found a bug in the -rt tree with respect to pthread_cond_timedwait. After trying his test program on the latest git from mainline, I found the bug was there too. The bug he was seeing that his test program showed, was that if one were to do a "Ctrl-Z" on a process that was in the pthread_cond_timedwait, and then did a "bg" on that process, it would return with a "-ETIMEDOUT" but early. That is, the timer would go off early. Looking into this, I found the source of the problem. And it is a rather nasty bug at that. Here's the relevant code from kernel/futex.c: (not in order in the file) [...] smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val, struct timespec __user *utime, u32 __user *uaddr2, u32 val3) { struct timespec ts; ktime_t t, *tp = NULL; u32 val2 = 0; int cmd = op & FUTEX_CMD_MASK; if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) { if (copy_from_user(&ts, utime, sizeof(ts)) != 0) return -EFAULT; if (!timespec_valid(&ts)) return -EINVAL; t = timespec_to_ktime(ts); if (cmd == FUTEX_WAIT) t = ktime_add(ktime_get(), t); tp = &t; } [...] return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); } [...] long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) { int ret; int cmd = op & FUTEX_CMD_MASK; struct rw_semaphore *fshared = NULL; if (!(op & FUTEX_PRIVATE_FLAG)) fshared = &current->mm->mmap_sem; switch (cmd) { case FUTEX_WAIT: ret = futex_wait(uaddr, fshared, val, timeout); [...] static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared, u32 val, ktime_t *abs_time) { [...] struct restart_block *restart; restart = &current_thread_info()->restart_block; restart->fn = futex_wait_restart; restart->arg0 = (unsigned long)uaddr; restart->arg1 = (unsigned long)val; restart->arg2 = (unsigned long)abs_time; restart->arg3 = 0; if (fshared) restart->arg3 |= ARG3_SHARED; return -ERESTART_RESTARTBLOCK; [...] static long futex_wait_restart(struct restart_block *restart) { u32 __user *uaddr = (u32 __user *)restart->arg0; u32 val = (u32)restart->arg1; ktime_t *abs_time = (ktime_t *)restart->arg2; struct rw_semaphore *fshared = NULL; restart->fn = do_no_restart_syscall; if (restart->arg3 & ARG3_SHARED) fshared = &current->mm->mmap_sem; return (long)futex_wait(uaddr, fshared, val, abs_time); } So when the futex_wait is interrupt by a signal we break out of the hrtimer code and set up or return from signal. This code does not return back to userspace, so we set up a RESTARTBLOCK. The bug here is that we save the "abs_time" which is a pointer to the stack variable "ktime_t t" from sys_futex. This returns and unwinds the stack before we get to call our signal. On return from the signal we go to futex_wait_restart, where we update all the parameters for futex_wait and call it. But here we have a problem where abs_time is no longer valid. I verified this with print statements, and sure enough, what abs_time was set to ends up being garbage when we get to futex_wait_restart. The solution I did to solve this (with input from Linus Torvalds) was to add unions to the restart_block to allow system calls to use the restart with specific parameters. This way the futex code now saves the time in a 64bit value in the restart block instead of storing it on the stack. Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64 in thread_info.h, when there's a #ifdef __KERNEL__ just below that. Not sure what that is there for. If this turns out to be a problem, I've tested this with using "unsigned int" for u32 and "unsigned long long" for u64 and it worked just the same. I'm using u32 and u64 just to be consistent with what the futex code uses. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 22:46:09 +08:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
extern long do_no_restart_syscall(struct restart_block *parm);
#include <linux/bitops.h>
#include <asm/thread_info.h>
#ifdef __KERNEL__
/*
* flag set/clear/test wrappers
* - pass TIF_xxxx constants to these functions
*/
static inline void set_ti_thread_flag(struct thread_info *ti, int flag)
{
x86: clean up bitops-related warnings Add casts to appropriate places to silence spurious bitops warnings. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:30:55 +08:00
set_bit(flag, (unsigned long *)&ti->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline void clear_ti_thread_flag(struct thread_info *ti, int flag)
{
x86: clean up bitops-related warnings Add casts to appropriate places to silence spurious bitops warnings. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:30:55 +08:00
clear_bit(flag, (unsigned long *)&ti->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline int test_and_set_ti_thread_flag(struct thread_info *ti, int flag)
{
x86: clean up bitops-related warnings Add casts to appropriate places to silence spurious bitops warnings. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:30:55 +08:00
return test_and_set_bit(flag, (unsigned long *)&ti->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline int test_and_clear_ti_thread_flag(struct thread_info *ti, int flag)
{
x86: clean up bitops-related warnings Add casts to appropriate places to silence spurious bitops warnings. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:30:55 +08:00
return test_and_clear_bit(flag, (unsigned long *)&ti->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline int test_ti_thread_flag(struct thread_info *ti, int flag)
{
x86: clean up bitops-related warnings Add casts to appropriate places to silence spurious bitops warnings. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:30:55 +08:00
return test_bit(flag, (unsigned long *)&ti->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] m68k: convert thread flags to use bit fields Remove task_work structure, use the standard thread flags functions and use shifts in entry.S to test the thread flags. Add a few local labels to entry.S to allow gas to generate short jumps. Finally it changes a number of inline functions in thread_info.h to macros to delay the current_thread_info() usage, which requires on m68k a structure (task_struct) not yet defined at this point. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14 08:06:59 +08:00
#define set_thread_flag(flag) \
set_ti_thread_flag(current_thread_info(), flag)
#define clear_thread_flag(flag) \
clear_ti_thread_flag(current_thread_info(), flag)
#define test_and_set_thread_flag(flag) \
test_and_set_ti_thread_flag(current_thread_info(), flag)
#define test_and_clear_thread_flag(flag) \
test_and_clear_ti_thread_flag(current_thread_info(), flag)
#define test_thread_flag(flag) \
test_ti_thread_flag(current_thread_info(), flag)
#define set_need_resched() set_thread_flag(TIF_NEED_RESCHED)
#define clear_need_resched() clear_thread_flag(TIF_NEED_RESCHED)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
signals: use HAVE_SET_RESTORE_SIGMASK Change all the #ifdef TIF_RESTORE_SIGMASK conditionals in non-arch code to #ifdef HAVE_SET_RESTORE_SIGMASK. If arch code defines it first, the generic set_restore_sigmask() using TIF_RESTORE_SIGMASK is not defined. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 15:53:09 +08:00
#if defined TIF_RESTORE_SIGMASK && !defined HAVE_SET_RESTORE_SIGMASK
/*
* An arch can define its own version of set_restore_sigmask() to get the
* job done however works, with or without TIF_RESTORE_SIGMASK.
*/
#define HAVE_SET_RESTORE_SIGMASK 1
signals: add set_restore_sigmask This adds the set_restore_sigmask() inline in <linux/thread_info.h> and replaces every set_thread_flag(TIF_RESTORE_SIGMASK) with a call to it. No change, but abstracts the details of the flag protocol from all the calls. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 15:53:06 +08:00
/**
* set_restore_sigmask() - make sure saved_sigmask processing gets done
*
* This sets TIF_RESTORE_SIGMASK and ensures that the arch signal code
signals: set_restore_sigmask TIF_SIGPENDING Set TIF_SIGPENDING in set_restore_sigmask. This lets arch code take TIF_RESTORE_SIGMASK out of the set of bits that will be noticed on return to user mode. On some machines those bits are scarce, and we can free this unneeded one up for other uses. It is probably the case that TIF_SIGPENDING is always set anyway everywhere set_restore_sigmask() is used. But this is some cheap paranoia in case there is an arcane case where it might not be. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 15:53:07 +08:00
* will run before returning to user mode, to process the flag. For
* all callers, TIF_SIGPENDING is already set or it's no harm to set
* it. TIF_RESTORE_SIGMASK need not be in the set of bits that the
* arch code will notice on return to user mode, in case those bits
* are scarce. We set TIF_SIGPENDING here to ensure that the arch
* signal code always gets run when TIF_RESTORE_SIGMASK is set.
signals: add set_restore_sigmask This adds the set_restore_sigmask() inline in <linux/thread_info.h> and replaces every set_thread_flag(TIF_RESTORE_SIGMASK) with a call to it. No change, but abstracts the details of the flag protocol from all the calls. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 15:53:06 +08:00
*/
static inline void set_restore_sigmask(void)
{
set_thread_flag(TIF_RESTORE_SIGMASK);
signals: set_restore_sigmask TIF_SIGPENDING Set TIF_SIGPENDING in set_restore_sigmask. This lets arch code take TIF_RESTORE_SIGMASK out of the set of bits that will be noticed on return to user mode. On some machines those bits are scarce, and we can free this unneeded one up for other uses. It is probably the case that TIF_SIGPENDING is always set anyway everywhere set_restore_sigmask() is used. But this is some cheap paranoia in case there is an arcane case where it might not be. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 15:53:07 +08:00
set_thread_flag(TIF_SIGPENDING);
signals: add set_restore_sigmask This adds the set_restore_sigmask() inline in <linux/thread_info.h> and replaces every set_thread_flag(TIF_RESTORE_SIGMASK) with a call to it. No change, but abstracts the details of the flag protocol from all the calls. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 15:53:06 +08:00
}
signals: use HAVE_SET_RESTORE_SIGMASK Change all the #ifdef TIF_RESTORE_SIGMASK conditionals in non-arch code to #ifdef HAVE_SET_RESTORE_SIGMASK. If arch code defines it first, the generic set_restore_sigmask() using TIF_RESTORE_SIGMASK is not defined. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 15:53:09 +08:00
#endif /* TIF_RESTORE_SIGMASK && !HAVE_SET_RESTORE_SIGMASK */
signals: add set_restore_sigmask This adds the set_restore_sigmask() inline in <linux/thread_info.h> and replaces every set_thread_flag(TIF_RESTORE_SIGMASK) with a call to it. No change, but abstracts the details of the flag protocol from all the calls. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 15:53:06 +08:00
#endif /* __KERNEL__ */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* _LINUX_THREAD_INFO_H */
Copy Permalink