renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
Code
59269b9448
linux-next/arch/arm/mach-omap2/prm44xx.h

775 lines
49 KiB
C
Raw Normal View History

ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/*
* OMAP44xx PRM instance offset macros
*
ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier Add PRM functions to test for pending PRM IRQs. This will be used in a subsequent patch to implement the PRM interrupt handler on the MPU. Add PRM functions to ensure that all outstanding writes from the MPU to the PRM IP block have completed before continuing execution. This will be used in a subsequent patch to ensure that all PRM interrupt status bits are cleared in the hardware before exiting the ISR. Normally we would not expose such a low-level function to other code. But the current implementation of the PRM interrupt code, which uses the generic IRQ chip code, doesn't give us a choice. The pending PRM IRQ functions are based on code originally written by Tero Kristo <t-kristo@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com>
2011-12-17 05:36:58 +08:00
* Copyright (C) 2009-2011 Texas Instruments, Inc.
OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention The MPU subsystem was named based on internal code name (CHIRON). This patch will remove all the occurences of the chiron name are replace it with PRCM_MPU in order to differentiate the MPU local PRCM to the global one. Remove PDA_ from PRCM_MPU registers names to stick to the global PRM naming convention. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-05-21 02:31:11 +08:00
* Copyright (C) 2009-2010 Nokia Corporation
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
*
* Paul Walmsley (paul@pwsan.com)
* Rajendra Nayak (rnayak@ti.com)
* Benoit Cousson (b-cousson@ti.com)
*
* This file is automatically generated from the OMAP hardware databases.
* We respectfully ask that any modifications to this file be coordinated
* with the public linux-omap@vger.kernel.org mailing list and the
* authors above to ensure that the autogeneration scripts are kept
* up-to-date with the file contents.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
OMAP4: PRCM: reorganize existing OMAP4 PRCM header files Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 06:30:54 +08:00
*
* XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX",
* or "OMAP4430".
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_H
#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
OMAP4: PRCM: reorganize existing OMAP4 PRCM header files Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 06:30:54 +08:00
#include "prcm-common.h"
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 06:30:55 +08:00
#include "prm.h"
OMAP4: PRCM: reorganize existing OMAP4 PRCM header files Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 06:30:54 +08:00
#define OMAP4430_PRM_BASE 0x4a306000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP44XX_PRM_REGADDR(inst, reg) \
OMAP4: prcm: Fix errors in few defines name A couple of macros were wrongly changed during the _MOD to _INST rename done in the following commit: OMAP4: PRCM: rename _MOD macros to _INST cdb54c4457d68994da7c2e16907adfbfc130060d Fix them to their original name. Some CM and PRM instances were not well aligned. Align them. Remove one blank line in cm2_44xx.h to align the output with the other (cm1_44xx.h, prm44xx.h) files. Update header copyright date. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 09:15:04 +08:00
OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (inst) + (reg))
OMAP4: PRCM: reorganize existing OMAP4 PRCM header files Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 06:30:54 +08:00
/* PRM instances */
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_OCP_SOCKET_INST 0x0000
#define OMAP4430_PRM_CKGEN_INST 0x0100
#define OMAP4430_PRM_MPU_INST 0x0300
#define OMAP4430_PRM_TESLA_INST 0x0400
#define OMAP4430_PRM_ABE_INST 0x0500
#define OMAP4430_PRM_ALWAYS_ON_INST 0x0600
#define OMAP4430_PRM_CORE_INST 0x0700
#define OMAP4430_PRM_IVAHD_INST 0x0f00
#define OMAP4430_PRM_CAM_INST 0x1000
#define OMAP4430_PRM_DSS_INST 0x1100
#define OMAP4430_PRM_GFX_INST 0x1200
OMAP4: prcm: Fix errors in few defines name A couple of macros were wrongly changed during the _MOD to _INST rename done in the following commit: OMAP4: PRCM: rename _MOD macros to _INST cdb54c4457d68994da7c2e16907adfbfc130060d Fix them to their original name. Some CM and PRM instances were not well aligned. Align them. Remove one blank line in cm2_44xx.h to align the output with the other (cm1_44xx.h, prm44xx.h) files. Update header copyright date. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 09:15:04 +08:00
#define OMAP4430_PRM_L3INIT_INST 0x1300
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_L4PER_INST 0x1400
OMAP4: prcm: Fix errors in few defines name A couple of macros were wrongly changed during the _MOD to _INST rename done in the following commit: OMAP4: PRCM: rename _MOD macros to _INST cdb54c4457d68994da7c2e16907adfbfc130060d Fix them to their original name. Some CM and PRM instances were not well aligned. Align them. Remove one blank line in cm2_44xx.h to align the output with the other (cm1_44xx.h, prm44xx.h) files. Update header copyright date. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 09:15:04 +08:00
#define OMAP4430_PRM_CEFUSE_INST 0x1600
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_WKUP_INST 0x1700
#define OMAP4430_PRM_WKUP_CM_INST 0x1800
#define OMAP4430_PRM_EMU_INST 0x1900
OMAP4: prcm: Fix errors in few defines name A couple of macros were wrongly changed during the _MOD to _INST rename done in the following commit: OMAP4: PRCM: rename _MOD macros to _INST cdb54c4457d68994da7c2e16907adfbfc130060d Fix them to their original name. Some CM and PRM instances were not well aligned. Align them. Remove one blank line in cm2_44xx.h to align the output with the other (cm1_44xx.h, prm44xx.h) files. Update header copyright date. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 09:15:04 +08:00
#define OMAP4430_PRM_EMU_CM_INST 0x1a00
#define OMAP4430_PRM_DEVICE_INST 0x1b00
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_INSTR_INST 0x1f00
OMAP4: PRCM: reorganize existing OMAP4 PRCM header files Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 06:30:54 +08:00
OMAP4: CM instances: add clockdomain register offsets In OMAP4 CM instances, some registers (CM_CLKSTCTRL, CM_STATICDEP, CM_DYNAMICDEP, and the module-specific registers underneath) are organized by clockdomain. Add the clockdomain offset macros to the appropriate PRCM module header files. This data was almost completely autogenerated from the TI hardware database; the autogeneration scripts have been updated. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 12:05:15 +08:00
/* PRM clockdomain register offsets (from instance start) */
#define OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS 0x0000
#define OMAP4430_PRM_EMU_CM_EMU_CDOFFS 0x0000
OMAP4: PRCM: reorganize existing OMAP4 PRCM header files Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 06:30:54 +08:00
/* OMAP4 specific register offsets */
#define OMAP4_RM_RSTCTRL 0x0000
#define OMAP4_RM_RSTTIME 0x0004
#define OMAP4_RM_RSTST 0x0008
#define OMAP4_PM_PWSTCTRL 0x0000
#define OMAP4_PM_PWSTST 0x0004
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM */
/* PRM.OCP_SOCKET_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_REVISION_PRM_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_REVISION_PRM OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_IRQSTATUS_MPU_OFFSET 0x0010
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_IRQSTATUS_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0010)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET 0x0014
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_IRQSTATUS_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0014)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_IRQENABLE_MPU_OFFSET 0x0018
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_IRQENABLE_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0018)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_IRQENABLE_MPU_2_OFFSET 0x001c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_IRQENABLE_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x001c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_IRQSTATUS_DUCATI_OFFSET 0x0020
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_IRQSTATUS_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0020)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_IRQENABLE_DUCATI_OFFSET 0x0028
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_IRQENABLE_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0028)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_IRQSTATUS_TESLA_OFFSET 0x0030
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_IRQSTATUS_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0030)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_IRQENABLE_TESLA_OFFSET 0x0038
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_IRQENABLE_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0038)
OMAP4: PM: Define additional registers for ES2 4430 ES2 has a few new registers added and a few modified from ES1. This patch adds all the register changes in PRM and CM for OMAP4430 ES2. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-28 04:02:56 +08:00
#define OMAP4_CM_PRM_PROFILING_CLKCTRL_OFFSET 0x0040
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_PRM_PROFILING_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0040)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.CKGEN_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_ABE_DSS_SYS_CLKSEL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_L4_WKUP_CLKSEL_OFFSET 0x0008
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_L4_WKUP_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0008)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_ABE_PLL_REF_CLKSEL_OFFSET 0x000c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_ABE_PLL_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x000c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_SYS_CLKSEL_OFFSET 0x0010
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0010)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.MPU_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_MPU_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_MPU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_MPU_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_MPU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_MPU_RSTST_OFFSET 0x0014
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_MPU_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0014)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_MPU_MPU_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_MPU_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0024)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.TESLA_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_TESLA_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_TESLA_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_TESLA_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_TESLA_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_TESLA_RSTCTRL_OFFSET 0x0010
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_TESLA_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0010)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_TESLA_RSTST_OFFSET 0x0014
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_TESLA_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0014)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_TESLA_TESLA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0024)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.ABE_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_AESS_CONTEXT_OFFSET 0x002c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_AESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x002c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_PDM_WKDEP_OFFSET 0x0030
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_PDM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0030)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_PDM_CONTEXT_OFFSET 0x0034
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_PDM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0034)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_DMIC_WKDEP_OFFSET 0x0038
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_DMIC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0038)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET 0x003c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_DMIC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x003c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_MCASP_WKDEP_OFFSET 0x0040
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_MCASP_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0040)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET 0x0044
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_MCASP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0044)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_MCBSP1_WKDEP_OFFSET 0x0048
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_MCBSP1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0048)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET 0x004c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_MCBSP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x004c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_MCBSP2_WKDEP_OFFSET 0x0050
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_MCBSP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0050)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET 0x0054
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_MCBSP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0054)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_MCBSP3_WKDEP_OFFSET 0x0058
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_MCBSP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0058)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET 0x005c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_MCBSP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x005c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_SLIMBUS_WKDEP_OFFSET 0x0060
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_SLIMBUS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0060)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET 0x0064
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0064)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_TIMER5_WKDEP_OFFSET 0x0068
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_TIMER5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0068)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET 0x006c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_TIMER5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x006c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_TIMER6_WKDEP_OFFSET 0x0070
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_TIMER6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0070)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET 0x0074
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_TIMER6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0074)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_TIMER7_WKDEP_OFFSET 0x0078
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_TIMER7_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0078)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET 0x007c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_TIMER7_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x007c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_TIMER8_WKDEP_OFFSET 0x0080
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_TIMER8_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0080)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET 0x0084
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_TIMER8_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0084)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ABE_WDT3_WKDEP_OFFSET 0x0088
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ABE_WDT3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0088)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET 0x008c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ABE_WDT3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x008c)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.ALWAYS_ON_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ALWON_MDMINTC_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0024)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ALWON_SR_MPU_WKDEP_OFFSET 0x0028
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ALWON_SR_MPU_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0028)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET 0x002c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x002c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ALWON_SR_IVA_WKDEP_OFFSET 0x0030
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ALWON_SR_IVA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0030)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET 0x0034
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0034)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_ALWON_SR_CORE_WKDEP_OFFSET 0x0038
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_ALWON_SR_CORE_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0038)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET 0x003c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x003c)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.CORE_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_CORE_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_CORE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_CORE_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_CORE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3_1_L3_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0024)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET 0x0124
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3_2_L3_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0124)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3_2_GPMC_CONTEXT_OFFSET 0x012c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3_2_GPMC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x012c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET 0x0134
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0134)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_DUCATI_RSTCTRL_OFFSET 0x0210
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_DUCATI_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0210)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_DUCATI_RSTST_OFFSET 0x0214
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_DUCATI_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0214)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET 0x0224
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0224)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET 0x0324
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_SDMA_SDMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0324)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET 0x0424
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_MEMIF_DMM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0424)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET 0x042c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x042c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET 0x0434
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0434)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET 0x043c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x043c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_MEMIF_DLL_CONTEXT_OFFSET 0x0444
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_MEMIF_DLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0444)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_MEMIF_EMIF_H1_CONTEXT_OFFSET 0x0454
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0454)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_MEMIF_EMIF_H2_CONTEXT_OFFSET 0x045c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x045c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_MEMIF_DLL_H_CONTEXT_OFFSET 0x0464
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0464)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET 0x0524
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_D2D_SAD2D_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0524)
OMAP4: prcm: Fix errors in few defines name A couple of macros were wrongly changed during the _MOD to _INST rename done in the following commit: OMAP4: PRCM: rename _MOD macros to _INST cdb54c4457d68994da7c2e16907adfbfc130060d Fix them to their original name. Some CM and PRM instances were not well aligned. Align them. Remove one blank line in cm2_44xx.h to align the output with the other (cm1_44xx.h, prm44xx.h) files. Update header copyright date. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 09:15:04 +08:00
#define OMAP4_RM_D2D_MODEM_ICR_CONTEXT_OFFSET 0x052c
#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x052c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_D2D_SAD2D_FW_CONTEXT_OFFSET 0x0534
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0534)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET 0x0624
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0624)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET 0x062c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x062c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET 0x0634
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0634)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET 0x063c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x063c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET 0x0724
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0724)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET 0x072c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x072c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET 0x0744
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0744)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.IVAHD_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_IVAHD_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_IVAHD_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_IVAHD_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_IVAHD_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_IVAHD_RSTCTRL_OFFSET 0x0010
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_IVAHD_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0010)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_IVAHD_RSTST_OFFSET 0x0014
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_IVAHD_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0014)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0024)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET 0x002c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_IVAHD_SL2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x002c)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.CAM_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_CAM_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_CAM_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_CAM_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_CAM_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_CAM_ISS_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_CAM_ISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0024)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET 0x002c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_CAM_FDIF_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x002c)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.DSS_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_DSS_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_DSS_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_DSS_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_DSS_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_DSS_DSS_WKDEP_OFFSET 0x0020
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_DSS_DSS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0020)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_DSS_DSS_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_DSS_DSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0024)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_DSS_DEISS_CONTEXT_OFFSET 0x002c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_DSS_DEISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x002c)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.GFX_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_GFX_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_GFX_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_GFX_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_GFX_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_GFX_GFX_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_GFX_GFX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0024)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.L3INIT_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_MMC1_WKDEP_OFFSET 0x0028
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_MMC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0028)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET 0x002c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_MMC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x002c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_MMC2_WKDEP_OFFSET 0x0030
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_MMC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0030)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET 0x0034
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_MMC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0034)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_HSI_WKDEP_OFFSET 0x0038
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_HSI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0038)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET 0x003c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_HSI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x003c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_UNIPRO1_WKDEP_OFFSET 0x0040
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0040)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_UNIPRO1_CONTEXT_OFFSET 0x0044
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0044)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_USB_HOST_WKDEP_OFFSET 0x0058
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0058)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET 0x005c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x005c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_USB_OTG_WKDEP_OFFSET 0x0060
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0060)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET 0x0064
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0064)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_USB_TLL_WKDEP_OFFSET 0x0068
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0068)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET 0x006c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x006c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_P1500_CONTEXT_OFFSET 0x007c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_P1500_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x007c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_EMAC_CONTEXT_OFFSET 0x0084
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_EMAC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0084)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_SATA_WKDEP_OFFSET 0x0088
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_SATA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0088)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_SATA_CONTEXT_OFFSET 0x008c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_SATA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x008c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_TPPSS_CONTEXT_OFFSET 0x0094
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0094)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_PCIESS_WKDEP_OFFSET 0x0098
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_PCIESS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0098)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_PCIESS_CONTEXT_OFFSET 0x009c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x009c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_CCPTX_CONTEXT_OFFSET 0x00ac
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00ac)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_XHPI_WKDEP_OFFSET 0x00c0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_XHPI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_XHPI_CONTEXT_OFFSET 0x00c4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_XHPI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_MMC6_WKDEP_OFFSET 0x00c8
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_MMC6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c8)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_MMC6_CONTEXT_OFFSET 0x00cc
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_MMC6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00cc)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L3INIT_USB_HOST_FS_WKDEP_OFFSET 0x00d0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00d0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET 0x00d4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00d4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET 0x00e4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00e4)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.L4PER_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_ADC_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_ADC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0024)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_DMTIMER10_WKDEP_OFFSET 0x0028
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0028)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET 0x002c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x002c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_DMTIMER11_WKDEP_OFFSET 0x0030
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0030)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET 0x0034
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0034)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_DMTIMER2_WKDEP_OFFSET 0x0038
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0038)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET 0x003c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x003c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_DMTIMER3_WKDEP_OFFSET 0x0040
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0040)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET 0x0044
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0044)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_DMTIMER4_WKDEP_OFFSET 0x0048
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0048)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET 0x004c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x004c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_DMTIMER9_WKDEP_OFFSET 0x0050
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0050)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET 0x0054
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0054)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET 0x005c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_ELM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x005c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_GPIO2_WKDEP_OFFSET 0x0060
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_GPIO2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0060)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET 0x0064
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_GPIO2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0064)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_GPIO3_WKDEP_OFFSET 0x0068
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_GPIO3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0068)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET 0x006c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_GPIO3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x006c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_GPIO4_WKDEP_OFFSET 0x0070
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_GPIO4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0070)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET 0x0074
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_GPIO4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0074)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_GPIO5_WKDEP_OFFSET 0x0078
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_GPIO5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0078)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET 0x007c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_GPIO5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x007c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_GPIO6_WKDEP_OFFSET 0x0080
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_GPIO6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0080)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET 0x0084
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_GPIO6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0084)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET 0x008c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x008c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_HECC1_WKDEP_OFFSET 0x0090
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_HECC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0090)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_HECC1_CONTEXT_OFFSET 0x0094
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_HECC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0094)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_HECC2_WKDEP_OFFSET 0x0098
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_HECC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0098)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_HECC2_CONTEXT_OFFSET 0x009c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_HECC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x009c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_I2C1_WKDEP_OFFSET 0x00a0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_I2C1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET 0x00a4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_I2C1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_I2C2_WKDEP_OFFSET 0x00a8
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_I2C2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a8)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET 0x00ac
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_I2C2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00ac)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_I2C3_WKDEP_OFFSET 0x00b0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_I2C3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET 0x00b4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_I2C3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_I2C4_WKDEP_OFFSET 0x00b8
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_I2C4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b8)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET 0x00bc
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_I2C4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00bc)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET 0x00c0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_L4_PER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00c0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_MCASP2_WKDEP_OFFSET 0x00d0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_MCASP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MCASP2_CONTEXT_OFFSET 0x00d4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MCASP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_MCASP3_WKDEP_OFFSET 0x00d8
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_MCASP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d8)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MCASP3_CONTEXT_OFFSET 0x00dc
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MCASP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00dc)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_MCBSP4_WKDEP_OFFSET 0x00e0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_MCBSP4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00e0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET 0x00e4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00e4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MGATE_CONTEXT_OFFSET 0x00ec
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MGATE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00ec)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_MCSPI1_WKDEP_OFFSET 0x00f0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_MCSPI1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET 0x00f4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_MCSPI2_WKDEP_OFFSET 0x00f8
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_MCSPI2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f8)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET 0x00fc
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00fc)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_MCSPI3_WKDEP_OFFSET 0x0100
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_MCSPI3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0100)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET 0x0104
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0104)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_MCSPI4_WKDEP_OFFSET 0x0108
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_MCSPI4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0108)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET 0x010c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x010c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_MMCSD3_WKDEP_OFFSET 0x0120
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_MMCSD3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0120)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET 0x0124
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0124)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_MMCSD4_WKDEP_OFFSET 0x0128
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_MMCSD4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0128)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET 0x012c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x012c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MSPROHG_CONTEXT_OFFSET 0x0134
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0134)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_SLIMBUS2_WKDEP_OFFSET 0x0138
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0138)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET 0x013c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x013c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_UART1_WKDEP_OFFSET 0x0140
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_UART1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0140)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET 0x0144
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_UART1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0144)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_UART2_WKDEP_OFFSET 0x0148
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_UART2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0148)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET 0x014c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_UART2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x014c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_UART3_WKDEP_OFFSET 0x0150
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_UART3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0150)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET 0x0154
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_UART3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0154)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_UART4_WKDEP_OFFSET 0x0158
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_UART4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0158)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET 0x015c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_UART4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x015c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_MMCSD5_WKDEP_OFFSET 0x0160
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_MMCSD5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0160)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET 0x0164
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0164)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_L4PER_I2C5_WKDEP_OFFSET 0x0168
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_L4PER_I2C5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0168)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4PER_I2C5_CONTEXT_OFFSET 0x016c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4PER_I2C5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x016c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET 0x01a4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4SEC_AES1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01a4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET 0x01ac
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4SEC_AES2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01ac)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET 0x01b4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01b4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4SEC_PKAEIP29_CONTEXT_OFFSET 0x01bc
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01bc)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4SEC_RNG_CONTEXT_OFFSET 0x01c4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4SEC_RNG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01c4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET 0x01cc
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01cc)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_L4SEC_CRYPTODMA_CONTEXT_OFFSET 0x01dc
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01dc)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.CEFUSE_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_CEFUSE_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_CEFUSE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_CEFUSE_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_CEFUSE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_CEFUSE_CEFUSE_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0024)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.WKUP_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0024)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_WDT1_CONTEXT_OFFSET 0x002c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_WDT1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x002c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_WKUP_WDT2_WKDEP_OFFSET 0x0030
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_WKUP_WDT2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0030)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET 0x0034
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_WDT2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0034)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_WKUP_GPIO1_WKDEP_OFFSET 0x0038
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_WKUP_GPIO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0038)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET 0x003c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_GPIO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x003c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_WKUP_TIMER1_WKDEP_OFFSET 0x0040
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_WKUP_TIMER1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0040)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET 0x0044
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_TIMER1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0044)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_WKUP_TIMER12_WKDEP_OFFSET 0x0048
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_WKUP_TIMER12_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0048)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_TIMER12_CONTEXT_OFFSET 0x004c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_TIMER12_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x004c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET 0x0054
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0054)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_WKUP_USIM_WKDEP_OFFSET 0x0058
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_WKUP_USIM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0058)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_USIM_CONTEXT_OFFSET 0x005c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_USIM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x005c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_SARRAM_CONTEXT_OFFSET 0x0064
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_SARRAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0064)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_WKUP_KEYBOARD_WKDEP_OFFSET 0x0078
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0078)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET 0x007c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x007c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_WKUP_RTC_WKDEP_OFFSET 0x0080
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_WKUP_RTC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0080)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_WKUP_RTC_CONTEXT_OFFSET 0x0084
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_WKUP_RTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0084)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.WKUP_CM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_CLKSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET 0x0020
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0020)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_WDT1_CLKCTRL_OFFSET 0x0028
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_WDT1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0028)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET 0x0030
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_WDT2_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0030)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET 0x0038
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0038)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET 0x0040
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0040)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_TIMER12_CLKCTRL_OFFSET 0x0048
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0048)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET 0x0050
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0050)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_USIM_CLKCTRL_OFFSET 0x0058
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_USIM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0058)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_SARRAM_CLKCTRL_OFFSET 0x0060
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0060)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET 0x0078
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0078)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_RTC_CLKCTRL_OFFSET 0x0080
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_RTC_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0080)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET 0x0088
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0088)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.EMU_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_EMU_PWRSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_EMU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PM_EMU_PWRSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PM_EMU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0024)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.EMU_CM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_EMU_CLKSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_EMU_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_EMU_DYNAMICDEP_OFFSET 0x0008
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_EMU_DYNAMICDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0008)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET 0x0020
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0020)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
/* PRM.DEVICE_PRM register offsets */
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_RSTCTRL_OFFSET 0x0000
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0000)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_RSTST_OFFSET 0x0004
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0004)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_RSTTIME_OFFSET 0x0008
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_RSTTIME OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0008)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_CLKREQCTRL_OFFSET 0x000c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_CLKREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x000c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VOLTCTRL_OFFSET 0x0010
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VOLTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0010)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_PWRREQCTRL_OFFSET 0x0014
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_PWRREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0014)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_PSCON_COUNT_OFFSET 0x0018
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_PSCON_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0018)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_IO_COUNT_OFFSET 0x001c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_IO_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x001c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_IO_PMCTRL_OFFSET 0x0020
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_IO_PMCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0020)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VOLTSETUP_WARMRESET_OFFSET 0x0024
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VOLTSETUP_WARMRESET OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0024)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VOLTSETUP_CORE_OFF_OFFSET 0x0028
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VOLTSETUP_CORE_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0028)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VOLTSETUP_MPU_OFF_OFFSET 0x002c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VOLTSETUP_MPU_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x002c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VOLTSETUP_IVA_OFF_OFFSET 0x0030
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VOLTSETUP_IVA_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0030)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET 0x0034
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0034)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET 0x0038
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0038)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET 0x003c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x003c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_CORE_CONFIG_OFFSET 0x0040
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_CORE_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0040)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_CORE_STATUS_OFFSET 0x0044
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_CORE_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0044)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET 0x0048
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_CORE_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0048)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET 0x004c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_CORE_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x004c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET 0x0050
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_CORE_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0050)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET 0x0054
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_CORE_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0054)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_MPU_CONFIG_OFFSET 0x0058
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_MPU_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0058)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_MPU_STATUS_OFFSET 0x005c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_MPU_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x005c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET 0x0060
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_MPU_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0060)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET 0x0064
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_MPU_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0064)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET 0x0068
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_MPU_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0068)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET 0x006c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_MPU_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x006c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_IVA_CONFIG_OFFSET 0x0070
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_IVA_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0070)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_IVA_STATUS_OFFSET 0x0074
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_IVA_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0074)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET 0x0078
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_IVA_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0078)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET 0x007c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_IVA_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x007c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET 0x0080
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_IVA_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0080)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET 0x0084
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VP_IVA_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0084)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VC_SMPS_SA_OFFSET 0x0088
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VC_SMPS_SA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0088)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET 0x008c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x008c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET 0x0090
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0090)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET 0x0094
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0094)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET 0x0098
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0098)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET 0x009c
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x009c)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VC_VAL_BYPASS_OFFSET 0x00a0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VC_VAL_BYPASS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VC_CFG_CHANNEL_OFFSET 0x00a4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VC_CFG_CHANNEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a4)
OMAP4: prcm: Fix errors in few defines name A couple of macros were wrongly changed during the _MOD to _INST rename done in the following commit: OMAP4: PRCM: rename _MOD macros to _INST cdb54c4457d68994da7c2e16907adfbfc130060d Fix them to their original name. Some CM and PRM instances were not well aligned. Align them. Remove one blank line in cm2_44xx.h to align the output with the other (cm1_44xx.h, prm44xx.h) files. Update header copyright date. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 09:15:04 +08:00
#define OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET 0x00a8
#define OMAP4430_PRM_VC_CFG_I2C_MODE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a8)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET 0x00ac
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VC_CFG_I2C_CLK OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00ac)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_SRAM_COUNT_OFFSET 0x00b0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_SRAM_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_SRAM_WKUP_SETUP_OFFSET 0x00b4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_SRAM_WKUP_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_LDO_SRAM_CORE_SETUP_OFFSET 0x00b8
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b8)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_LDO_SRAM_CORE_CTRL_OFFSET 0x00bc
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00bc)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_LDO_SRAM_MPU_SETUP_OFFSET 0x00c0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_LDO_SRAM_MPU_CTRL_OFFSET 0x00c4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_LDO_SRAM_IVA_SETUP_OFFSET 0x00c8
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c8)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_LDO_SRAM_IVA_CTRL_OFFSET 0x00cc
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00cc)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_LDO_ABB_MPU_SETUP_OFFSET 0x00d0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_ABB_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_LDO_ABB_MPU_CTRL_OFFSET 0x00d4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_ABB_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_LDO_ABB_IVA_SETUP_OFFSET 0x00d8
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_ABB_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d8)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET 0x00dc
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_ABB_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00dc)
OMAP4: PM: Define additional registers for ES2 4430 ES2 has a few new registers added and a few modified from ES1. This patch adds all the register changes in PRM and CM for OMAP4430 ES2. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-28 04:02:56 +08:00
#define OMAP4_PRM_LDO_BANDGAP_SETUP_OFFSET 0x00e0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_LDO_BANDGAP_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e0)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_DEVICE_OFF_CTRL_OFFSET 0x00e4
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_DEVICE_OFF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e4)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_PHASE1_CNDP_OFFSET 0x00e8
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_PHASE1_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e8)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_PHASE2A_CNDP_OFFSET 0x00ec
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_PHASE2A_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00ec)
OMAP4: PRCM: Add offset defines for all PRM registers The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-21 02:31:12 +08:00
#define OMAP4_PRM_PHASE2B_CNDP_OFFSET 0x00f0
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_PHASE2B_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f0)
OMAP4: prcm: Fix errors in few defines name A couple of macros were wrongly changed during the _MOD to _INST rename done in the following commit: OMAP4: PRCM: rename _MOD macros to _INST cdb54c4457d68994da7c2e16907adfbfc130060d Fix them to their original name. Some CM and PRM instances were not well aligned. Align them. Remove one blank line in cm2_44xx.h to align the output with the other (cm1_44xx.h, prm44xx.h) files. Update header copyright date. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 09:15:04 +08:00
#define OMAP4_PRM_MODEM_IF_CTRL_OFFSET 0x00f4
#define OMAP4430_PRM_MODEM_IF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f4)
OMAP4: PM: Define additional registers for ES2 4430 ES2 has a few new registers added and a few modified from ES1. This patch adds all the register changes in PRM and CM for OMAP4430 ES2. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-28 04:02:56 +08:00
#define OMAP4_PRM_VC_ERRST_OFFSET 0x00f8
OMAP4: PRCM: rename _MOD macros to _INST Back in the OMAP2/3 PRCM interface days, the macros that referred to the offsets of individual PRM/CM instances from the top of the PRM/CM hardware modules were incorrectly suffixed with "_MOD". (They should have been suffixed with something like "_INST" or "_INSTANCE".) These days, now that we have better contact with the OMAP hardware people, we know that this naming is wrong. And in fact in OMAP4, there are actual hardware module offsets inside the instances, so the incorrect naming gets confusing very quickly for anyone who knows the hardware. Fix this naming for OMAP4, before things get too far along, by changing "_MOD" to "_INST" on the end of these macros. So, for example, OMAP4430_CM2_INSTR_MOD becomes OMAP4430_CM2_INSTR_INST. This unfortunately creates quite a large diff, but it is a straightforward rename. This patch should not result in any functional changes. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 06:30:55 +08:00
#define OMAP4430_PRM_VC_ERRST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f8)
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
OMAP4: PRCM: reorganize existing OMAP4 PRCM header files Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 06:30:54 +08:00
/* Function prototypes */
# ifndef __ASSEMBLER__
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions In some ways, the OMAP4 PRCM register layout is quite different than the OMAP2/3 PRCM register layout. For example, on OMAP2/3, from a register layout point of view, all CM instances were located in the CM subsystem, and all PRM instances were located in the PRM subsystem. OMAP4 changes this. Now, for example, some CM instances, such as WKUP_CM and EMU_CM, are located in the system PRM subsystem. And a "local PRCM" exists for the MPU - this PRCM combines registers that would normally appear in both CM and PRM instances, but uses its own register layout which matches neither the OMAP2/3 PRCM layout nor the OMAP4 PRCM layout. To try to deal with this, introduce some new functions, omap4_cminst* and omap4_prminst*. The former is to be used when writing to a CM instance register (no matter what subsystem or hardware module it exists in), and the latter, similarly, with PRM instance registers. To determine which "PRCM partition" to write to, the functions take a PRCM instance ID argument. Subsequent patches add these partition IDs to the OMAP4 powerdomain and clockdomain definitions. As far as I can see, there's really no good way to handle these types of register access inconsistencies. This patch seemed like the least bad approach. Moving forward, the long-term goal is to remove all direct PRCM register access from the PM code. PRCM register access should go through layers such as the powerdomain and clockdomain code that can hide the details of how to interact with the specific hardware variant. While here, rename cm4xxx.c to cm44xx.c to match the naming convention of the other OMAP4 PRCM files. Thanks to Santosh Shilimkar <santosh.shilimkar@ti.com>, Rajendra Nayak <rnayak@ti.com>, and Benoît Cousson <b-cousson@ti.com> for some comments. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 12:05:14 +08:00
extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx);
extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
OMAP4: PRCM: reorganize existing OMAP4 PRCM header files Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 06:30:54 +08:00
OMAP2+: add PRM VP functions for checking/clearing VP TX done status Add SoC specific PRM VP helper functions for checking and clearing the VP transaction done status. Longer term, these events should be handled by the forthcoming PRCM interrupt handler. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-29 01:52:04 +08:00
/* OMAP4-specific VP functions */
u32 omap4_prm_vp_check_txdone(u8 vp_id);
void omap4_prm_vp_clear_txdone(u8 vp_id);
OMAP2+: PRM: add register access functions for VC/VP On OMAP3+, the voltage controller (VC) and voltage processor (VP) are inside the PRM. Add some PRM helper functions for register access to these module registers. Thanks to Nishanth Menon for finding/fixing a sparse problem. Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-29 01:25:12 +08:00
/*
* OMAP4 access functions for voltage controller (VC) and
* voltage proccessor (VP) in the PRM.
*/
extern u32 omap4_prm_vcvp_read(u8 offset);
extern void omap4_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier Add PRM functions to test for pending PRM IRQs. This will be used in a subsequent patch to implement the PRM interrupt handler on the MPU. Add PRM functions to ensure that all outstanding writes from the MPU to the PRM IP block have completed before continuing execution. This will be used in a subsequent patch to ensure that all PRM interrupt status bits are cleared in the hardware before exiting the ISR. Normally we would not expose such a low-level function to other code. But the current implementation of the PRM interrupt code, which uses the generic IRQ chip code, doesn't give us a choice. The pending PRM IRQ functions are based on code originally written by Tero Kristo <t-kristo@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com>
2011-12-17 05:36:58 +08:00
/* PRM interrupt-related functions */
extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
extern void omap44xx_prm_ocp_barrier(void);
ARM: OMAP: PRCM: add suspend prepare / finish support PRCM chain handler needs to disable forwarding of interrupts during suspend, because runtime PM is disabled and most of the drivers are potentially not able to handle interrupts coming at this time. This patch masks all the PRCM interrupt events if a PRCM interrupt occurs during suspend, but does not ack them. Once suspend finish is called, all the masked events will be re-enabled, which causes immediate PRCM interrupt and handles the postponed event. The suspend prepare and complete callbacks will be called from pm34xx.c / pm44xx.c files in the following patches. The functions defined in this patch should eventually be moved to suspend->prepare and suspend->finish driver hooks, once the PRCM chain handler will be made as its own driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Tested-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> [paul@pwsan.com: add kerneldoc, add omap_prcm_irq_setup.saved_mask, add fn ptrs for save_and_clear_irqen() and restore_irqen()] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-17 05:36:58 +08:00
extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier Add PRM functions to test for pending PRM IRQs. This will be used in a subsequent patch to implement the PRM interrupt handler on the MPU. Add PRM functions to ensure that all outstanding writes from the MPU to the PRM IP block have completed before continuing execution. This will be used in a subsequent patch to ensure that all PRM interrupt status bits are cleared in the hardware before exiting the ISR. Normally we would not expose such a low-level function to other code. But the current implementation of the PRM interrupt code, which uses the generic IRQ chip code, doesn't give us a choice. The pending PRM IRQ functions are based on code originally written by Tero Kristo <t-kristo@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com>
2011-12-17 05:36:58 +08:00
OMAP4: PRCM: reorganize existing OMAP4 PRCM header files Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 06:30:54 +08:00
# endif
ARM: OMAP4: PM: Adds PRM register defs for OMAP4 This patch adds OMAP4 specific PRM register defs. Auto generated using a python script (gen_prm_4430_h.py) developed by Paul Walmsley and Benoit Cousson. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-09 09:24:51 +08:00
#endif
Copy Permalink