2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 19:53:59 +08:00
linux-next/arch/x86/pci/mmconfig-shared.c

795 lines
19 KiB
C
Raw Normal View History

/*
* mmconfig-shared.c - Low-level direct PCI config space access via
* MMCONFIG - common code between i386 and x86-64.
*
* This code does:
* - known chipset handling
* - ACPI decoding and validation
*
* Per-architecture code takes care of the mappings and accesses
* themselves.
*/
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/sfi_acpi.h>
#include <linux/bitmap.h>
#include <linux/dmi.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/rculist.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
#include <asm/acpi.h>
#define PREFIX "PCI: "
/* Indicate if the mmcfg resources have been placed into the resource table. */
static bool pci_mmcfg_running_state;
static bool pci_mmcfg_arch_init_failed;
static DEFINE_MUTEX(pci_mmcfg_lock);
LIST_HEAD(pci_mmcfg_list);
static __init void pci_mmconfig_remove(struct pci_mmcfg_region *cfg)
{
if (cfg->res.parent)
release_resource(&cfg->res);
list_del(&cfg->list);
kfree(cfg);
}
static __init void free_all_mmcfg(void)
{
struct pci_mmcfg_region *cfg, *tmp;
pci_mmcfg_arch_free();
list_for_each_entry_safe(cfg, tmp, &pci_mmcfg_list, list)
pci_mmconfig_remove(cfg);
}
static __devinit void list_add_sorted(struct pci_mmcfg_region *new)
{
struct pci_mmcfg_region *cfg;
/* keep list sorted by segment and starting bus number */
list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list) {
if (cfg->segment > new->segment ||
(cfg->segment == new->segment &&
cfg->start_bus >= new->start_bus)) {
list_add_tail_rcu(&new->list, &cfg->list);
return;
}
}
list_add_tail_rcu(&new->list, &pci_mmcfg_list);
}
static __devinit struct pci_mmcfg_region *pci_mmconfig_alloc(int segment,
int start,
int end, u64 addr)
{
struct pci_mmcfg_region *new;
struct resource *res;
if (addr == 0)
return NULL;
new = kzalloc(sizeof(*new), GFP_KERNEL);
if (!new)
return NULL;
new->address = addr;
new->segment = segment;
new->start_bus = start;
new->end_bus = end;
res = &new->res;
res->start = addr + PCI_MMCFG_BUS_OFFSET(start);
res->end = addr + PCI_MMCFG_BUS_OFFSET(end + 1) - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
snprintf(new->name, PCI_MMCFG_RESOURCE_NAME_LEN,
"PCI MMCONFIG %04x [bus %02x-%02x]", segment, start, end);
res->name = new->name;
return new;
}
static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start,
int end, u64 addr)
{
struct pci_mmcfg_region *new;
new = pci_mmconfig_alloc(segment, start, end, addr);
if (new) {
mutex_lock(&pci_mmcfg_lock);
list_add_sorted(new);
mutex_unlock(&pci_mmcfg_lock);
printk(KERN_INFO PREFIX
"MMCONFIG for domain %04x [bus %02x-%02x] at %pR "
"(base %#lx)\n",
segment, start, end, &new->res, (unsigned long)addr);
}
return new;
}
struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus)
{
struct pci_mmcfg_region *cfg;
list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list)
if (cfg->segment == segment &&
cfg->start_bus <= bus && bus <= cfg->end_bus)
return cfg;
return NULL;
}
static const char __init *pci_mmcfg_e7520(void)
{
u32 win;
raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0xce, 2, &win);
win = win & 0xf000;
if (win == 0x0000 || win == 0xf000)
return NULL;
if (pci_mmconfig_add(0, 0, 255, win << 16) == NULL)
return NULL;
return "Intel Corporation E7520 Memory Controller Hub";
}
static const char __init *pci_mmcfg_intel_945(void)
{
u32 pciexbar, mask = 0, len = 0;
raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0x48, 4, &pciexbar);
/* Enable bit */
if (!(pciexbar & 1))
return NULL;
/* Size bits */
switch ((pciexbar >> 1) & 3) {
case 0:
mask = 0xf0000000U;
len = 0x10000000U;
break;
case 1:
mask = 0xf8000000U;
len = 0x08000000U;
break;
case 2:
mask = 0xfc000000U;
len = 0x04000000U;
break;
default:
return NULL;
}
/* Errata #2, things break when not aligned on a 256Mb boundary */
/* Can only happen in 64M/128M mode */
if ((pciexbar & mask) & 0x0fffffffU)
return NULL;
/* Don't hit the APIC registers and their friends */
if ((pciexbar & mask) >= 0xf0000000U)
return NULL;
if (pci_mmconfig_add(0, 0, (len >> 20) - 1, pciexbar & mask) == NULL)
return NULL;
return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
}
static const char __init *pci_mmcfg_amd_fam10h(void)
{
u32 low, high, address;
u64 base, msr;
int i;
unsigned segnbits = 0, busnbits, end_bus;
if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF))
return NULL;
address = MSR_FAM10H_MMIO_CONF_BASE;
if (rdmsr_safe(address, &low, &high))
return NULL;
msr = high;
msr <<= 32;
msr |= low;
/* mmconfig is not enable */
if (!(msr & FAM10H_MMIO_CONF_ENABLE))
return NULL;
base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
busnbits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
FAM10H_MMIO_CONF_BUSRANGE_MASK;
/*
* only handle bus 0 ?
* need to skip it
*/
if (!busnbits)
return NULL;
if (busnbits > 8) {
segnbits = busnbits - 8;
busnbits = 8;
}
end_bus = (1 << busnbits) - 1;
for (i = 0; i < (1 << segnbits); i++)
if (pci_mmconfig_add(i, 0, end_bus,
base + (1<<28) * i) == NULL) {
free_all_mmcfg();
return NULL;
}
return "AMD Family 10h NB";
}
static bool __initdata mcp55_checked;
static const char __init *pci_mmcfg_nvidia_mcp55(void)
{
int bus;
int mcp55_mmconf_found = 0;
static const u32 extcfg_regnum = 0x90;
static const u32 extcfg_regsize = 4;
static const u32 extcfg_enable_mask = 1<<31;
static const u32 extcfg_start_mask = 0xff<<16;
static const int extcfg_start_shift = 16;
static const u32 extcfg_size_mask = 0x3<<28;
static const int extcfg_size_shift = 28;
static const int extcfg_sizebus[] = {0x100, 0x80, 0x40, 0x20};
static const u32 extcfg_base_mask[] = {0x7ff8, 0x7ffc, 0x7ffe, 0x7fff};
static const int extcfg_base_lshift = 25;
/*
* do check if amd fam10h already took over
*/
if (!acpi_disabled || !list_empty(&pci_mmcfg_list) || mcp55_checked)
return NULL;
mcp55_checked = true;
for (bus = 0; bus < 256; bus++) {
u64 base;
u32 l, extcfg;
u16 vendor, device;
int start, size_index, end;
raw_pci_ops->read(0, bus, PCI_DEVFN(0, 0), 0, 4, &l);
vendor = l & 0xffff;
device = (l >> 16) & 0xffff;
if (PCI_VENDOR_ID_NVIDIA != vendor || 0x0369 != device)
continue;
raw_pci_ops->read(0, bus, PCI_DEVFN(0, 0), extcfg_regnum,
extcfg_regsize, &extcfg);
if (!(extcfg & extcfg_enable_mask))
continue;
size_index = (extcfg & extcfg_size_mask) >> extcfg_size_shift;
base = extcfg & extcfg_base_mask[size_index];
/* base could > 4G */
base <<= extcfg_base_lshift;
start = (extcfg & extcfg_start_mask) >> extcfg_start_shift;
end = start + extcfg_sizebus[size_index] - 1;
if (pci_mmconfig_add(0, start, end, base) == NULL)
continue;
mcp55_mmconf_found++;
}
if (!mcp55_mmconf_found)
return NULL;
return "nVidia MCP55";
}
struct pci_mmcfg_hostbridge_probe {
u32 bus;
u32 devfn;
u32 vendor;
u32 device;
const char *(*probe)(void);
};
static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = {
{ 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
{ 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
{ 0, PCI_DEVFN(0x18, 0), PCI_VENDOR_ID_AMD,
0x1200, pci_mmcfg_amd_fam10h },
{ 0xff, PCI_DEVFN(0, 0), PCI_VENDOR_ID_AMD,
0x1200, pci_mmcfg_amd_fam10h },
{ 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_NVIDIA,
0x0369, pci_mmcfg_nvidia_mcp55 },
};
static void __init pci_mmcfg_check_end_bus_number(void)
{
struct pci_mmcfg_region *cfg, *cfgx;
/* Fixup overlaps */
list_for_each_entry(cfg, &pci_mmcfg_list, list) {
if (cfg->end_bus < cfg->start_bus)
cfg->end_bus = 255;
/* Don't access the list head ! */
if (cfg->list.next == &pci_mmcfg_list)
break;
cfgx = list_entry(cfg->list.next, typeof(*cfg), list);
if (cfg->end_bus >= cfgx->start_bus)
cfg->end_bus = cfgx->start_bus - 1;
}
}
static int __init pci_mmcfg_check_hostbridge(void)
{
u32 l;
u32 bus, devfn;
u16 vendor, device;
int i;
const char *name;
if (!raw_pci_ops)
return 0;
free_all_mmcfg();
for (i = 0; i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
bus = pci_mmcfg_probes[i].bus;
devfn = pci_mmcfg_probes[i].devfn;
raw_pci_ops->read(0, bus, devfn, 0, 4, &l);
vendor = l & 0xffff;
device = (l >> 16) & 0xffff;
name = NULL;
if (pci_mmcfg_probes[i].vendor == vendor &&
pci_mmcfg_probes[i].device == device)
name = pci_mmcfg_probes[i].probe();
if (name)
printk(KERN_INFO PREFIX "%s with MMCONFIG support\n",
name);
}
/* some end_bus_number is crazy, fix it */
pci_mmcfg_check_end_bus_number();
return !list_empty(&pci_mmcfg_list);
}
static acpi_status __devinit check_mcfg_resource(struct acpi_resource *res,
void *data)
x86: validate against acpi motherboard resources This path adds validation of the MMCONFIG table against the ACPI reserved motherboard resources. If the MMCONFIG table is found to be reserved in ACPI, we don't bother checking the E820 table. The PCI Express firmware spec apparently tells BIOS developers that reservation in ACPI is required and E820 reservation is optional, so checking against ACPI first makes sense. Many BIOSes don't reserve the MMCONFIG region in E820 even though it is perfectly functional, the existing check needlessly disables MMCONFIG in these cases. In order to do this, MMCONFIG setup has been split into two phases. If PCI configuration type 1 is not available then MMCONFIG is enabled early as before. Otherwise, it is enabled later after the ACPI interpreter is enabled, since we need to be able to execute control methods in order to check the ACPI reserved resources. Presently this is just triggered off the end of ACPI interpreter initialization. There are a few other behavioral changes here: - Validate all MMCONFIG configurations provided, not just the first one. - Validate the entire required length of each configuration according to the provided ending bus number is reserved, not just the minimum required allocation. - Validate that the area is reserved even if we read it from the chipset directly and not from the MCFG table. This catches the case where the BIOS didn't set the location properly in the chipset and has mapped it over other things it shouldn't have. This also cleans up the MMCONFIG initialization functions so that they simply do nothing if MMCONFIG is not compiled in. Based on an original patch by Rajesh Shah from Intel. [akpm@linux-foundation.org: many fixes and cleanups] Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andi Kleen <ak@suse.de> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-15 17:27:20 +08:00
{
struct resource *mcfg_res = data;
struct acpi_resource_address64 address;
acpi_status status;
if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) {
struct acpi_resource_fixed_memory32 *fixmem32 =
&res->data.fixed_memory32;
if (!fixmem32)
return AE_OK;
if ((mcfg_res->start >= fixmem32->address) &&
(mcfg_res->end < (fixmem32->address +
x86: validate against acpi motherboard resources This path adds validation of the MMCONFIG table against the ACPI reserved motherboard resources. If the MMCONFIG table is found to be reserved in ACPI, we don't bother checking the E820 table. The PCI Express firmware spec apparently tells BIOS developers that reservation in ACPI is required and E820 reservation is optional, so checking against ACPI first makes sense. Many BIOSes don't reserve the MMCONFIG region in E820 even though it is perfectly functional, the existing check needlessly disables MMCONFIG in these cases. In order to do this, MMCONFIG setup has been split into two phases. If PCI configuration type 1 is not available then MMCONFIG is enabled early as before. Otherwise, it is enabled later after the ACPI interpreter is enabled, since we need to be able to execute control methods in order to check the ACPI reserved resources. Presently this is just triggered off the end of ACPI interpreter initialization. There are a few other behavioral changes here: - Validate all MMCONFIG configurations provided, not just the first one. - Validate the entire required length of each configuration according to the provided ending bus number is reserved, not just the minimum required allocation. - Validate that the area is reserved even if we read it from the chipset directly and not from the MCFG table. This catches the case where the BIOS didn't set the location properly in the chipset and has mapped it over other things it shouldn't have. This also cleans up the MMCONFIG initialization functions so that they simply do nothing if MMCONFIG is not compiled in. Based on an original patch by Rajesh Shah from Intel. [akpm@linux-foundation.org: many fixes and cleanups] Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andi Kleen <ak@suse.de> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-15 17:27:20 +08:00
fixmem32->address_length))) {
mcfg_res->flags = 1;
return AE_CTRL_TERMINATE;
}
}
if ((res->type != ACPI_RESOURCE_TYPE_ADDRESS32) &&
(res->type != ACPI_RESOURCE_TYPE_ADDRESS64))
return AE_OK;
status = acpi_resource_to_address64(res, &address);
if (ACPI_FAILURE(status) ||
(address.address_length <= 0) ||
(address.resource_type != ACPI_MEMORY_RANGE))
return AE_OK;
if ((mcfg_res->start >= address.minimum) &&
(mcfg_res->end < (address.minimum + address.address_length))) {
x86: validate against acpi motherboard resources This path adds validation of the MMCONFIG table against the ACPI reserved motherboard resources. If the MMCONFIG table is found to be reserved in ACPI, we don't bother checking the E820 table. The PCI Express firmware spec apparently tells BIOS developers that reservation in ACPI is required and E820 reservation is optional, so checking against ACPI first makes sense. Many BIOSes don't reserve the MMCONFIG region in E820 even though it is perfectly functional, the existing check needlessly disables MMCONFIG in these cases. In order to do this, MMCONFIG setup has been split into two phases. If PCI configuration type 1 is not available then MMCONFIG is enabled early as before. Otherwise, it is enabled later after the ACPI interpreter is enabled, since we need to be able to execute control methods in order to check the ACPI reserved resources. Presently this is just triggered off the end of ACPI interpreter initialization. There are a few other behavioral changes here: - Validate all MMCONFIG configurations provided, not just the first one. - Validate the entire required length of each configuration according to the provided ending bus number is reserved, not just the minimum required allocation. - Validate that the area is reserved even if we read it from the chipset directly and not from the MCFG table. This catches the case where the BIOS didn't set the location properly in the chipset and has mapped it over other things it shouldn't have. This also cleans up the MMCONFIG initialization functions so that they simply do nothing if MMCONFIG is not compiled in. Based on an original patch by Rajesh Shah from Intel. [akpm@linux-foundation.org: many fixes and cleanups] Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andi Kleen <ak@suse.de> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-15 17:27:20 +08:00
mcfg_res->flags = 1;
return AE_CTRL_TERMINATE;
}
return AE_OK;
}
static acpi_status __devinit find_mboard_resource(acpi_handle handle, u32 lvl,
void *context, void **rv)
x86: validate against acpi motherboard resources This path adds validation of the MMCONFIG table against the ACPI reserved motherboard resources. If the MMCONFIG table is found to be reserved in ACPI, we don't bother checking the E820 table. The PCI Express firmware spec apparently tells BIOS developers that reservation in ACPI is required and E820 reservation is optional, so checking against ACPI first makes sense. Many BIOSes don't reserve the MMCONFIG region in E820 even though it is perfectly functional, the existing check needlessly disables MMCONFIG in these cases. In order to do this, MMCONFIG setup has been split into two phases. If PCI configuration type 1 is not available then MMCONFIG is enabled early as before. Otherwise, it is enabled later after the ACPI interpreter is enabled, since we need to be able to execute control methods in order to check the ACPI reserved resources. Presently this is just triggered off the end of ACPI interpreter initialization. There are a few other behavioral changes here: - Validate all MMCONFIG configurations provided, not just the first one. - Validate the entire required length of each configuration according to the provided ending bus number is reserved, not just the minimum required allocation. - Validate that the area is reserved even if we read it from the chipset directly and not from the MCFG table. This catches the case where the BIOS didn't set the location properly in the chipset and has mapped it over other things it shouldn't have. This also cleans up the MMCONFIG initialization functions so that they simply do nothing if MMCONFIG is not compiled in. Based on an original patch by Rajesh Shah from Intel. [akpm@linux-foundation.org: many fixes and cleanups] Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andi Kleen <ak@suse.de> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-15 17:27:20 +08:00
{
struct resource *mcfg_res = context;
acpi_walk_resources(handle, METHOD_NAME__CRS,
check_mcfg_resource, context);
if (mcfg_res->flags)
return AE_CTRL_TERMINATE;
return AE_OK;
}
static int __devinit is_acpi_reserved(u64 start, u64 end, unsigned not_used)
x86: validate against acpi motherboard resources This path adds validation of the MMCONFIG table against the ACPI reserved motherboard resources. If the MMCONFIG table is found to be reserved in ACPI, we don't bother checking the E820 table. The PCI Express firmware spec apparently tells BIOS developers that reservation in ACPI is required and E820 reservation is optional, so checking against ACPI first makes sense. Many BIOSes don't reserve the MMCONFIG region in E820 even though it is perfectly functional, the existing check needlessly disables MMCONFIG in these cases. In order to do this, MMCONFIG setup has been split into two phases. If PCI configuration type 1 is not available then MMCONFIG is enabled early as before. Otherwise, it is enabled later after the ACPI interpreter is enabled, since we need to be able to execute control methods in order to check the ACPI reserved resources. Presently this is just triggered off the end of ACPI interpreter initialization. There are a few other behavioral changes here: - Validate all MMCONFIG configurations provided, not just the first one. - Validate the entire required length of each configuration according to the provided ending bus number is reserved, not just the minimum required allocation. - Validate that the area is reserved even if we read it from the chipset directly and not from the MCFG table. This catches the case where the BIOS didn't set the location properly in the chipset and has mapped it over other things it shouldn't have. This also cleans up the MMCONFIG initialization functions so that they simply do nothing if MMCONFIG is not compiled in. Based on an original patch by Rajesh Shah from Intel. [akpm@linux-foundation.org: many fixes and cleanups] Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andi Kleen <ak@suse.de> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-15 17:27:20 +08:00
{
struct resource mcfg_res;
mcfg_res.start = start;
mcfg_res.end = end - 1;
x86: validate against acpi motherboard resources This path adds validation of the MMCONFIG table against the ACPI reserved motherboard resources. If the MMCONFIG table is found to be reserved in ACPI, we don't bother checking the E820 table. The PCI Express firmware spec apparently tells BIOS developers that reservation in ACPI is required and E820 reservation is optional, so checking against ACPI first makes sense. Many BIOSes don't reserve the MMCONFIG region in E820 even though it is perfectly functional, the existing check needlessly disables MMCONFIG in these cases. In order to do this, MMCONFIG setup has been split into two phases. If PCI configuration type 1 is not available then MMCONFIG is enabled early as before. Otherwise, it is enabled later after the ACPI interpreter is enabled, since we need to be able to execute control methods in order to check the ACPI reserved resources. Presently this is just triggered off the end of ACPI interpreter initialization. There are a few other behavioral changes here: - Validate all MMCONFIG configurations provided, not just the first one. - Validate the entire required length of each configuration according to the provided ending bus number is reserved, not just the minimum required allocation. - Validate that the area is reserved even if we read it from the chipset directly and not from the MCFG table. This catches the case where the BIOS didn't set the location properly in the chipset and has mapped it over other things it shouldn't have. This also cleans up the MMCONFIG initialization functions so that they simply do nothing if MMCONFIG is not compiled in. Based on an original patch by Rajesh Shah from Intel. [akpm@linux-foundation.org: many fixes and cleanups] Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andi Kleen <ak@suse.de> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-15 17:27:20 +08:00
mcfg_res.flags = 0;
acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL);
if (!mcfg_res.flags)
acpi_get_devices("PNP0C02", find_mboard_resource, &mcfg_res,
NULL);
return mcfg_res.flags;
}
typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
static int __ref is_mmconf_reserved(check_reserved_t is_reserved,
struct pci_mmcfg_region *cfg,
struct device *dev, int with_e820)
{
u64 addr = cfg->res.start;
u64 size = resource_size(&cfg->res);
u64 old_size = size;
int num_buses;
char *method = with_e820 ? "E820" : "ACPI motherboard resources";
while (!is_reserved(addr, addr + size, E820_RESERVED)) {
size >>= 1;
if (size < (16UL<<20))
break;
}
if (size < (16UL<<20) && size != old_size)
return 0;
if (dev)
dev_info(dev, "MMCONFIG at %pR reserved in %s\n",
&cfg->res, method);
else
printk(KERN_INFO PREFIX
"MMCONFIG at %pR reserved in %s\n",
&cfg->res, method);
if (old_size != size) {
/* update end_bus */
cfg->end_bus = cfg->start_bus + ((size>>20) - 1);
num_buses = cfg->end_bus - cfg->start_bus + 1;
cfg->res.end = cfg->res.start +
PCI_MMCFG_BUS_OFFSET(num_buses) - 1;
snprintf(cfg->name, PCI_MMCFG_RESOURCE_NAME_LEN,
"PCI MMCONFIG %04x [bus %02x-%02x]",
cfg->segment, cfg->start_bus, cfg->end_bus);
if (dev)
dev_info(dev,
"MMCONFIG "
"at %pR (base %#lx) (size reduced!)\n",
&cfg->res, (unsigned long) cfg->address);
else
printk(KERN_INFO PREFIX
"MMCONFIG for %04x [bus%02x-%02x] "
"at %pR (base %#lx) (size reduced!)\n",
cfg->segment, cfg->start_bus, cfg->end_bus,
&cfg->res, (unsigned long) cfg->address);
}
return 1;
}
static int __ref pci_mmcfg_check_reserved(struct device *dev,
struct pci_mmcfg_region *cfg, int early)
{
if (!early && !acpi_disabled) {
if (is_mmconf_reserved(is_acpi_reserved, cfg, dev, 0))
return 1;
if (dev)
dev_info(dev, FW_INFO
"MMCONFIG at %pR not reserved in "
"ACPI motherboard resources\n",
&cfg->res);
else
printk(KERN_INFO FW_INFO PREFIX
"MMCONFIG at %pR not reserved in "
"ACPI motherboard resources\n",
&cfg->res);
}
/*
* e820_all_mapped() is marked as __init.
* All entries from ACPI MCFG table have been checked at boot time.
* For MCFG information constructed from hotpluggable host bridge's
* _CBA method, just assume it's reserved.
*/
if (pci_mmcfg_running_state)
return 1;
/* Don't try to do this check unless configuration
type 1 is available. how about type 2 ?*/
if (raw_pci_ops)
return is_mmconf_reserved(e820_all_mapped, cfg, dev, 1);
return 0;
}
static void __init pci_mmcfg_reject_broken(int early)
{
struct pci_mmcfg_region *cfg;
list_for_each_entry(cfg, &pci_mmcfg_list, list) {
if (pci_mmcfg_check_reserved(NULL, cfg, early) == 0) {
printk(KERN_INFO PREFIX "not using MMCONFIG\n");
free_all_mmcfg();
return;
}
}
}
static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg,
struct acpi_mcfg_allocation *cfg)
{
int year;
if (cfg->address < 0xFFFFFFFF)
return 0;
if (!strcmp(mcfg->header.oem_id, "SGI") ||
!strcmp(mcfg->header.oem_id, "SGI2"))
return 0;
if (mcfg->header.revision >= 1) {
if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) &&
year >= 2010)
return 0;
}
printk(KERN_ERR PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx "
"is above 4GB, ignored\n", cfg->pci_segment,
cfg->start_bus_number, cfg->end_bus_number, cfg->address);
return -EINVAL;
}
static int __init pci_parse_mcfg(struct acpi_table_header *header)
{
struct acpi_table_mcfg *mcfg;
struct acpi_mcfg_allocation *cfg_table, *cfg;
unsigned long i;
int entries;
if (!header)
return -EINVAL;
mcfg = (struct acpi_table_mcfg *)header;
/* how many config structures do we have */
free_all_mmcfg();
entries = 0;
i = header->length - sizeof(struct acpi_table_mcfg);
while (i >= sizeof(struct acpi_mcfg_allocation)) {
entries++;
i -= sizeof(struct acpi_mcfg_allocation);
};
if (entries == 0) {
printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
return -ENODEV;
}
cfg_table = (struct acpi_mcfg_allocation *) &mcfg[1];
for (i = 0; i < entries; i++) {
cfg = &cfg_table[i];
if (acpi_mcfg_check_entry(mcfg, cfg)) {
free_all_mmcfg();
return -ENODEV;
}
if (pci_mmconfig_add(cfg->pci_segment, cfg->start_bus_number,
cfg->end_bus_number, cfg->address) == NULL) {
printk(KERN_WARNING PREFIX
"no memory for MCFG entries\n");
free_all_mmcfg();
return -ENOMEM;
}
}
return 0;
}
static void __init __pci_mmcfg_init(int early)
{
pci_mmcfg_reject_broken(early);
if (list_empty(&pci_mmcfg_list))
return;
if (pcibios_last_bus < 0) {
const struct pci_mmcfg_region *cfg;
list_for_each_entry(cfg, &pci_mmcfg_list, list) {
if (cfg->segment)
break;
pcibios_last_bus = cfg->end_bus;
}
}
if (pci_mmcfg_arch_init())
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
else {
free_all_mmcfg();
pci_mmcfg_arch_init_failed = true;
}
}
static int __initdata known_bridge;
void __init pci_mmcfg_early_init(void)
{
if (pci_probe & PCI_PROBE_MMCONF) {
if (pci_mmcfg_check_hostbridge())
known_bridge = 1;
else
acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
__pci_mmcfg_init(1);
}
}
void __init pci_mmcfg_late_init(void)
{
/* MMCONFIG disabled */
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
if (known_bridge)
return;
/* MMCONFIG hasn't been enabled yet, try again */
if (pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF) {
acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
__pci_mmcfg_init(0);
}
}
static int __init pci_mmcfg_late_insert_resources(void)
{
struct pci_mmcfg_region *cfg;
pci_mmcfg_running_state = true;
/* If we are not using MMCONFIG, don't insert the resources. */
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return 1;
/*
* Attempt to insert the mmcfg resources but not with the busy flag
* marked so it won't cause request errors when __request_region is
* called.
*/
list_for_each_entry(cfg, &pci_mmcfg_list, list)
if (!cfg->res.parent)
insert_resource(&iomem_resource, &cfg->res);
return 0;
}
/*
* Perform MMCONFIG resource insertion after PCI initialization to allow for
* misprogrammed MCFG tables that state larger sizes but actually conflict
* with other system resources.
*/
late_initcall(pci_mmcfg_late_insert_resources);
/* Add MMCFG information for host bridges */
int __devinit pci_mmconfig_insert(struct device *dev,
u16 seg, u8 start, u8 end,
phys_addr_t addr)
{
int rc;
struct resource *tmp = NULL;
struct pci_mmcfg_region *cfg;
if (!(pci_probe & PCI_PROBE_MMCONF) || pci_mmcfg_arch_init_failed)
return -ENODEV;
if (start > end)
return -EINVAL;
mutex_lock(&pci_mmcfg_lock);
cfg = pci_mmconfig_lookup(seg, start);
if (cfg) {
if (cfg->end_bus < end)
dev_info(dev, FW_INFO
"MMCONFIG for "
"domain %04x [bus %02x-%02x] "
"only partially covers this bridge\n",
cfg->segment, cfg->start_bus, cfg->end_bus);
mutex_unlock(&pci_mmcfg_lock);
return -EEXIST;
}
if (!addr) {
mutex_unlock(&pci_mmcfg_lock);
return -EINVAL;
}
rc = -EBUSY;
cfg = pci_mmconfig_alloc(seg, start, end, addr);
if (cfg == NULL) {
dev_warn(dev, "fail to add MMCONFIG (out of memory)\n");
rc = -ENOMEM;
} else if (!pci_mmcfg_check_reserved(dev, cfg, 0)) {
dev_warn(dev, FW_BUG "MMCONFIG %pR isn't reserved\n",
&cfg->res);
} else {
/* Insert resource if it's not in boot stage */
if (pci_mmcfg_running_state)
tmp = insert_resource_conflict(&iomem_resource,
&cfg->res);
if (tmp) {
dev_warn(dev,
"MMCONFIG %pR conflicts with "
"%s %pR\n",
&cfg->res, tmp->name, tmp);
} else if (pci_mmcfg_arch_map(cfg)) {
dev_warn(dev, "fail to map MMCONFIG %pR.\n",
&cfg->res);
} else {
list_add_sorted(cfg);
dev_info(dev, "MMCONFIG at %pR (base %#lx)\n",
&cfg->res, (unsigned long)addr);
cfg = NULL;
rc = 0;
}
}
if (cfg) {
if (cfg->res.parent)
release_resource(&cfg->res);
kfree(cfg);
}
mutex_unlock(&pci_mmcfg_lock);
return rc;
}
/* Delete MMCFG information for host bridges */
int pci_mmconfig_delete(u16 seg, u8 start, u8 end)
{
struct pci_mmcfg_region *cfg;
mutex_lock(&pci_mmcfg_lock);
list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list)
if (cfg->segment == seg && cfg->start_bus == start &&
cfg->end_bus == end) {
list_del_rcu(&cfg->list);
synchronize_rcu();
pci_mmcfg_arch_unmap(cfg);
if (cfg->res.parent)
release_resource(&cfg->res);
mutex_unlock(&pci_mmcfg_lock);
kfree(cfg);
return 0;
}
mutex_unlock(&pci_mmcfg_lock);
return -ENOENT;
}