2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 07:34:06 +08:00
linux-next/sound/firewire/fireworks/fireworks_transaction.c

327 lines
8.0 KiB
C
Raw Normal View History

/*
* fireworks_transaction.c - a part of driver for Fireworks based devices
*
* Copyright (c) 2013-2014 Takashi Sakamoto
*
* Licensed under the terms of the GNU General Public License, version 2.
*/
/*
* Fireworks have its own transaction. The transaction can be delivered by AV/C
* Vendor Specific command. But at least Windows driver and firmware version 5.5
* or later don't use it.
*
* Transaction substance:
* At first, 6 data exist. Following to the 6 data, parameters for each
* commands exists. All of parameters are 32 bit alighed to big endian.
* data[0]: Length of transaction substance
* data[1]: Transaction version
* data[2]: Sequence number. This is incremented by the device
* data[3]: transaction category
* data[4]: transaction command
* data[5]: return value in response.
* data[6-]: parameters
*
* Transaction address:
* command: 0xecc000000000
* response: 0xecc080000000 (default)
*
* I note that the address for response can be changed by command. But this
* module uses the default address.
*/
#include "./fireworks.h"
#define MEMORY_SPACE_EFW_COMMAND 0xecc000000000
#define MEMORY_SPACE_EFW_RESPONSE 0xecc080000000
#define ERROR_RETRIES 3
#define ERROR_DELAY_MS 5
#define EFC_TIMEOUT_MS 125
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
static DEFINE_SPINLOCK(instances_lock);
static struct snd_efw *instances[SNDRV_CARDS] = SNDRV_DEFAULT_PTR;
static DEFINE_SPINLOCK(transaction_queues_lock);
static LIST_HEAD(transaction_queues);
enum transaction_queue_state {
STATE_PENDING,
STATE_BUS_RESET,
STATE_COMPLETE
};
struct transaction_queue {
struct list_head list;
struct fw_unit *unit;
void *buf;
unsigned int size;
u32 seqnum;
enum transaction_queue_state state;
wait_queue_head_t wait;
};
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
int snd_efw_transaction_cmd(struct fw_unit *unit,
const void *cmd, unsigned int size)
{
return snd_fw_transaction(unit, TCODE_WRITE_BLOCK_REQUEST,
MEMORY_SPACE_EFW_COMMAND,
(void *)cmd, size, 0);
}
int snd_efw_transaction_run(struct fw_unit *unit,
const void *cmd, unsigned int cmd_size,
void *resp, unsigned int resp_size)
{
struct transaction_queue t;
unsigned int tries;
int ret;
t.unit = unit;
t.buf = resp;
t.size = resp_size;
t.seqnum = be32_to_cpu(((struct snd_efw_transaction *)cmd)->seqnum) + 1;
t.state = STATE_PENDING;
init_waitqueue_head(&t.wait);
spin_lock_irq(&transaction_queues_lock);
list_add_tail(&t.list, &transaction_queues);
spin_unlock_irq(&transaction_queues_lock);
tries = 0;
do {
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
ret = snd_efw_transaction_cmd(t.unit, (void *)cmd, cmd_size);
if (ret < 0)
break;
wait_event_timeout(t.wait, t.state != STATE_PENDING,
msecs_to_jiffies(EFC_TIMEOUT_MS));
if (t.state == STATE_COMPLETE) {
ret = t.size;
break;
} else if (t.state == STATE_BUS_RESET) {
msleep(ERROR_DELAY_MS);
} else if (++tries >= ERROR_RETRIES) {
dev_err(&t.unit->device, "EFW transaction timed out\n");
ret = -EIO;
break;
}
} while (1);
spin_lock_irq(&transaction_queues_lock);
list_del(&t.list);
spin_unlock_irq(&transaction_queues_lock);
return ret;
}
static void
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
copy_resp_to_buf(struct snd_efw *efw, void *data, size_t length, int *rcode)
{
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
size_t capacity, till_end;
struct snd_efw_transaction *t;
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
spin_lock_irq(&efw->lock);
t = (struct snd_efw_transaction *)data;
length = min_t(size_t, t->length * sizeof(t->length), length);
if (efw->push_ptr < efw->pull_ptr)
capacity = (unsigned int)(efw->pull_ptr - efw->push_ptr);
else
capacity = snd_efw_resp_buf_size -
(unsigned int)(efw->push_ptr - efw->pull_ptr);
/* confirm enough space for this response */
if (capacity < length) {
*rcode = RCODE_CONFLICT_ERROR;
goto end;
}
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
/* copy to ring buffer */
while (length > 0) {
till_end = snd_efw_resp_buf_size -
(unsigned int)(efw->push_ptr - efw->resp_buf);
till_end = min_t(unsigned int, length, till_end);
memcpy(efw->push_ptr, data, till_end);
efw->push_ptr += till_end;
if (efw->push_ptr >= efw->resp_buf + snd_efw_resp_buf_size)
efw->push_ptr = efw->resp_buf;
length -= till_end;
data += till_end;
}
/* for hwdep */
efw->resp_queues++;
wake_up(&efw->hwdep_wait);
*rcode = RCODE_COMPLETE;
end:
spin_unlock_irq(&efw->lock);
}
static void
handle_resp_for_user(struct fw_card *card, int generation, int source,
void *data, size_t length, int *rcode)
{
struct fw_device *device;
struct snd_efw *efw;
unsigned int i;
spin_lock_irq(&instances_lock);
for (i = 0; i < SNDRV_CARDS; i++) {
efw = instances[i];
if (efw == NULL)
continue;
device = fw_parent_device(efw->unit);
if ((device->card != card) ||
(device->generation != generation))
continue;
smp_rmb(); /* node id vs. generation */
if (device->node_id != source)
continue;
break;
}
if (i == SNDRV_CARDS)
goto end;
copy_resp_to_buf(efw, data, length, rcode);
end:
spin_unlock_irq(&instances_lock);
}
static void
handle_resp_for_kernel(struct fw_card *card, int generation, int source,
void *data, size_t length, int *rcode, u32 seqnum)
{
struct fw_device *device;
struct transaction_queue *t;
unsigned long flags;
spin_lock_irqsave(&transaction_queues_lock, flags);
list_for_each_entry(t, &transaction_queues, list) {
device = fw_parent_device(t->unit);
if ((device->card != card) ||
(device->generation != generation))
continue;
smp_rmb(); /* node_id vs. generation */
if (device->node_id != source)
continue;
if ((t->state == STATE_PENDING) && (t->seqnum == seqnum)) {
t->state = STATE_COMPLETE;
t->size = min_t(unsigned int, length, t->size);
memcpy(t->buf, data, t->size);
wake_up(&t->wait);
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
*rcode = RCODE_COMPLETE;
}
}
spin_unlock_irqrestore(&transaction_queues_lock, flags);
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
}
static void
efw_response(struct fw_card *card, struct fw_request *request,
int tcode, int destination, int source,
int generation, unsigned long long offset,
void *data, size_t length, void *callback_data)
{
int rcode, dummy;
u32 seqnum;
rcode = RCODE_TYPE_ERROR;
if (length < sizeof(struct snd_efw_transaction)) {
rcode = RCODE_DATA_ERROR;
goto end;
} else if (offset != MEMORY_SPACE_EFW_RESPONSE) {
rcode = RCODE_ADDRESS_ERROR;
goto end;
}
seqnum = be32_to_cpu(((struct snd_efw_transaction *)data)->seqnum);
if (seqnum > SND_EFW_TRANSACTION_USER_SEQNUM_MAX + 1) {
handle_resp_for_kernel(card, generation, source,
data, length, &rcode, seqnum);
if (snd_efw_resp_buf_debug)
handle_resp_for_user(card, generation, source,
data, length, &dummy);
} else {
handle_resp_for_user(card, generation, source,
data, length, &rcode);
}
end:
fw_send_response(card, request, rcode);
}
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
void snd_efw_transaction_add_instance(struct snd_efw *efw)
{
unsigned int i;
spin_lock_irq(&instances_lock);
for (i = 0; i < SNDRV_CARDS; i++) {
if (instances[i] != NULL)
continue;
instances[i] = efw;
break;
}
spin_unlock_irq(&instances_lock);
}
void snd_efw_transaction_remove_instance(struct snd_efw *efw)
{
unsigned int i;
spin_lock_irq(&instances_lock);
for (i = 0; i < SNDRV_CARDS; i++) {
if (instances[i] != efw)
continue;
instances[i] = NULL;
}
spin_unlock_irq(&instances_lock);
}
void snd_efw_transaction_bus_reset(struct fw_unit *unit)
{
struct transaction_queue *t;
spin_lock_irq(&transaction_queues_lock);
list_for_each_entry(t, &transaction_queues, list) {
if ((t->unit == unit) &&
(t->state == STATE_PENDING)) {
t->state = STATE_BUS_RESET;
wake_up(&t->wait);
}
}
spin_unlock_irq(&transaction_queues_lock);
}
static struct fw_address_handler resp_register_handler = {
.length = SND_EFW_RESPONSE_MAXIMUM_BYTES,
.address_callback = efw_response
};
int snd_efw_transaction_register(void)
{
static const struct fw_address_region resp_register_region = {
.start = MEMORY_SPACE_EFW_RESPONSE,
.end = MEMORY_SPACE_EFW_RESPONSE +
SND_EFW_RESPONSE_MAXIMUM_BYTES
};
return fw_core_add_address_handler(&resp_register_handler,
&resp_register_region);
}
void snd_efw_transaction_unregister(void)
{
WARN_ON(!list_empty(&transaction_queues));
fw_core_remove_address_handler(&resp_register_handler);
}