renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code
53b6fc28ea
linux-next/drivers/usb/phy/Makefile

35 lines
1.3 KiB
Makefile
Raw Normal View History

USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:47:04 +08:00
#
# Makefile for physical layer USB drivers
#
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
usb: phy: make it a menuconfig We already have a considerable amount of USB PHY drivers, making it a menuconfig just prevents us from adding too much churn to USB's menuconfig. While at that, also select USB_OTG_UTILS from this new menuconfig just to keep backwards compatibility until we manage to remove that symbol. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 17:13:43 +08:00
obj-$(CONFIG_USB_PHY) += phy.o
usb: add devicetree helpers for determining dr_mode and phy_type This adds two little devicetree helper functions for determining the dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from the devicetree. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13 22:59:55 +08:00
obj-$(CONFIG_OF) += of.o
usb: phy: move all PHY drivers to drivers/usb/phy/ that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 17:01:15 +08:00
# transceiver drivers, keep the list sorted
usb: phy: rename all phy drivers to phy-$name-usb.c this will make sure that we have sensible names for all phy drivers. Current situation was already quite bad with too generic names being used. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 23:37:59 +08:00
obj-$(CONFIG_AB8500_USB) += phy-ab8500-usb.o
phy-fsl-usb2-objs := phy-fsl-usb.o phy-fsm-usb.o
obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb2.o
USB: OMAP: ISP1301 needs USB_PHY The Kconfig entry for USB_OMAP unconditionally selects USB_ISP1301, which is now only visible when USB_PHY is also enabled. This adds an appropriate dependency and enables USB_PHY in the omap1 defconfig, avoiding these build warnings: warning: (USB_OHCI_HCD && USB_OMAP) selects ISP1301_OMAP which has unmet direct dependencies (USB_SUPPORT && USB_PHY && I2C && ARCH_OMAP_OTG) Also fix a Makefile typo while we're at it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-26 01:29:03 +08:00
obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o
usb: phy: rename all phy drivers to phy-$name-usb.c this will make sure that we have sensible names for all phy drivers. Current situation was already quite bad with too generic names being used. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 23:37:59 +08:00
obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o
usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv The "nop" driver isn't a do-nothing-stub but supports a couple functions like clock on/off or is able to use a voltage regulator. This patch simply renames the driver to "generic" since it is easy possible to extend it by a simple function istead of writing a complete driver. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-26 18:16:42 +08:00
obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
usb: phy: rename all phy drivers to phy-$name-usb.c this will make sure that we have sensible names for all phy drivers. Current situation was already quite bad with too generic names being used. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 23:37:59 +08:00
obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o
obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
usb: phy: samsung: Common out the generic stuff Moving register and structure definitions to header file, and keeping the generic functions to be used across multiple PHYs in common phy helper driver under SAMSUNG_USBPHY, and moving USB 2.0 PHY driver under SAMSUNG_USB2PHY. Also allowing samsung PHY drivers be built as modules. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-14 18:29:10 +08:00
obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o
usb: phy: samsung: Add PHY support for USB 3.0 controller Adding PHY driver support for USB 3.0 controller for Samsung's SoCs. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-14 18:29:11 +08:00
obj-$(CONFIG_SAMSUNG_USB3PHY) += phy-samsung-usb3.o
usb: phy: rename all phy drivers to phy-$name-usb.c this will make sure that we have sensible names for all phy drivers. Current situation was already quite bad with too generic names being used. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07 23:37:59 +08:00
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o
obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o
obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o
obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o
obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o
obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o
obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
Copy Permalink