2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
linux-next/arch/arm/mach-omap1/board-ams-delta.c

634 lines
15 KiB
C
Raw Normal View History

/*
* linux/arch/arm/mach-omap1/board-ams-delta.c
*
* Modified from board-generic.c
*
* Board specific inits for the Amstrad E3 (codename Delta) videophone
*
* Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/basic_mmio_gpio.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin The Amstrad Delta on-board latch2 bit named MODEM_NRESET, now available as a GPIO pin AMS_DELTA_GPIO_PIN_NMODEM_RESET, is used to power up/down (bring into/out of a reset state) two distinct on-board devices simultaneously: the modem, and the voice codec. As a consequence, that bit is, or can be, manipulated concurrently by two drivers, or their platform provided hooks. Instead of updating those drivers to use the gpiolib API as a new method of controlling the MODEM_NRESET pin state, like it was done to other drivers accessing latch2 pins, and still being vulnerable to potential concurrency conflicts, or trying to solve that sharing issue with a custom piece of code, set up a fixed regulator device on top of that GPIO pin, with the intention of updating both drivers to manipulate that regulator, not the GPIO pin directly. Before the ASoC driver is updated and the modem platform data expanded with a power management callback for switching its power, the ams_delta_latch_write() function, which still provides the old API for accessing latch2 functionality from not updated drivers, is modified to toggle the regulator instead of the MODEM_NRESET GPIO pin. A helper function provided for balancing the regulator enable/disable operations, together with the consumer data needed for tracking the regulator state, will be removed once the drivers are updated. Depends on patch series "ARM: OMAP1: ams-delta: replace custom I/O with GPIO". Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-06 00:05:10 +08:00
#include <linux/regulator/consumer.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
#include <linux/omapfb.h>
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
#include <media/soc_camera.h>
#include <asm/serial.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/board-ams-delta.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/mux.h>
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
#include <mach/camera.h>
#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
static const unsigned int ams_delta_keymap[] = {
KEY(0, 0, KEY_F1), /* Advert */
KEY(0, 3, KEY_COFFEE), /* Games */
KEY(0, 2, KEY_QUESTION), /* Directory */
KEY(2, 3, KEY_CONNECT), /* Internet */
KEY(1, 2, KEY_SHOP), /* Services */
KEY(1, 1, KEY_PHONE), /* VoiceMail */
KEY(0, 1, KEY_DELETE), /* Delete */
KEY(2, 2, KEY_PLAY), /* Play */
KEY(1, 0, KEY_PAGEUP), /* Up */
KEY(1, 3, KEY_PAGEDOWN), /* Down */
KEY(2, 0, KEY_EMAIL), /* ReadEmail */
KEY(2, 1, KEY_STOP), /* Stop */
/* Numeric keypad portion */
KEY(0, 7, KEY_KP1),
KEY(0, 6, KEY_KP2),
KEY(0, 5, KEY_KP3),
KEY(1, 7, KEY_KP4),
KEY(1, 6, KEY_KP5),
KEY(1, 5, KEY_KP6),
KEY(2, 7, KEY_KP7),
KEY(2, 6, KEY_KP8),
KEY(2, 5, KEY_KP9),
KEY(3, 6, KEY_KP0),
KEY(3, 7, KEY_KPASTERISK),
KEY(3, 5, KEY_KPDOT), /* # key */
KEY(7, 2, KEY_NUMLOCK), /* Mute */
KEY(7, 1, KEY_KPMINUS), /* Recall */
KEY(6, 1, KEY_KPPLUS), /* Redial */
KEY(7, 6, KEY_KPSLASH), /* Handsfree */
KEY(6, 0, KEY_ENTER), /* Video */
KEY(7, 4, KEY_CAMERA), /* Photo */
KEY(0, 4, KEY_F2), /* Home */
KEY(1, 4, KEY_F3), /* Office */
KEY(2, 4, KEY_F4), /* Mobile */
KEY(7, 7, KEY_F5), /* SMS */
KEY(7, 5, KEY_F6), /* Email */
/* QWERTY portion of keypad */
KEY(3, 4, KEY_Q),
KEY(3, 3, KEY_W),
KEY(3, 2, KEY_E),
KEY(3, 1, KEY_R),
KEY(3, 0, KEY_T),
KEY(4, 7, KEY_Y),
KEY(4, 6, KEY_U),
KEY(4, 5, KEY_I),
KEY(4, 4, KEY_O),
KEY(4, 3, KEY_P),
KEY(4, 2, KEY_A),
KEY(4, 1, KEY_S),
KEY(4, 0, KEY_D),
KEY(5, 7, KEY_F),
KEY(5, 6, KEY_G),
KEY(5, 5, KEY_H),
KEY(5, 4, KEY_J),
KEY(5, 3, KEY_K),
KEY(5, 2, KEY_L),
KEY(5, 1, KEY_Z),
KEY(5, 0, KEY_X),
KEY(6, 7, KEY_C),
KEY(6, 6, KEY_V),
KEY(6, 5, KEY_B),
KEY(6, 4, KEY_N),
KEY(6, 3, KEY_M),
KEY(6, 2, KEY_SPACE),
KEY(7, 0, KEY_LEFTSHIFT), /* Vol up */
KEY(7, 3, KEY_LEFTCTRL), /* Vol down */
};
#define LATCH1_PHYS 0x01000000
#define LATCH1_VIRT 0xEA000000
#define MODEM_PHYS 0x04000000
#define MODEM_VIRT 0xEB000000
#define LATCH2_PHYS 0x08000000
#define LATCH2_VIRT 0xEC000000
static struct map_desc ams_delta_io_desc[] __initdata = {
/* AMS_DELTA_LATCH1 */
{
.virtual = LATCH1_VIRT,
.pfn = __phys_to_pfn(LATCH1_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
/* AMS_DELTA_LATCH2 */
{
.virtual = LATCH2_VIRT,
.pfn = __phys_to_pfn(LATCH2_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
/* AMS_DELTA_MODEM */
{
.virtual = MODEM_VIRT,
.pfn = __phys_to_pfn(MODEM_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
}
};
static struct omap_lcd_config ams_delta_lcd_config __initdata = {
.ctrl_name = "internal",
};
ARM: OMAP1: fix USB configuration use-after-release All boards, except Amstrad E3, mark USB config with __initdata. As a result, when you compile USB into modules, they will try to refer already released platform data and the behaviour is undefined. For example on Nokia 770, I get the following kernel panic when modprobing ohci-hcd: [ 3.462158] Unable to handle kernel paging request at virtual address e7fddef0 [ 3.477050] pgd = c3434000 [ 3.487365] [e7fddef0] *pgd=00000000 [ 3.498535] Internal error: Oops: 80000005 [#1] ARM [ 3.510955] Modules linked in: ohci_hcd(+) [ 3.522705] CPU: 0 Not tainted (3.7.0-770_tiny+ #5) [ 3.535552] PC is at 0xe7fddef0 [ 3.546508] LR is at ohci_omap_init+0x5c/0x144 [ohci_hcd] [ 3.560272] pc : [<e7fddef0>] lr : [<bf003140>] psr: a0000013 [ 3.560272] sp : c344bdb0 ip : c344bce0 fp : c344bdcc [ 3.589782] r10: 00000001 r9 : 00000000 r8 : 00000000 [ 3.604553] r7 : 00000026 r6 : 000000de r5 : c0227300 r4 : c342d620 [ 3.621032] r3 : e7fddef0 r2 : c048b880 r1 : 00000000 r0 : 0000000a [ 3.637786] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 3.655822] Control: 0005317f Table: 13434000 DAC: 00000015 [ 3.672790] Process modprobe (pid: 425, stack limit = 0xc344a1b8) [ 3.690643] Stack: (0xc344bdb0 to 0xc344c000) [ 3.707031] bda0: bf0030e4 c342d620 00000000 c049e62c [ 3.727905] bdc0: c344be04 c344bdd0 c0150ff0 bf0030f4 bf001b88 00000000 c048a4ac c345b020 [ 3.748870] bde0: c342d620 00000000 c048a468 bf003968 00000001 bf006000 c344be34 c344be08 [ 3.769836] be00: bf001bf0 c0150e48 00000000 c344be18 c00b9bfc c048a478 c048a4ac bf0037f8 [ 3.790985] be20: c012ca04 c000e024 c344be44 c344be38 c012d968 bf001a84 c344be64 c344be48 [ 3.812164] be40: c012c8ac c012d95c 00000000 c048a478 c048a4ac bf0037f8 c344be84 c344be68 [ 3.833740] be60: c012ca74 c012c80c 20000013 00000000 c344be88 bf0037f8 c344beac c344be88 [ 3.855468] be80: c012b038 c012ca14 c38093cc c383ee10 bf0037f8 c35be5a0 c049d5e8 00000000 [ 3.877166] bea0: c344bebc c344beb0 c012c40c c012aff4 c344beec c344bec0 c012bfc0 c012c3fc [ 3.898834] bec0: bf00378c 00000000 c344beec bf0037f8 00067f39 00000000 00005c44 c000e024 [ 3.920837] bee0: c344bf14 c344bef0 c012cd54 c012befc c04ce080 00067f39 00000000 00005c44 [ 3.943023] bf00: c000e024 bf006000 c344bf24 c344bf18 c012db14 c012ccc0 c344bf3c c344bf28 [ 3.965423] bf20: bf00604c c012dad8 c344a000 bf003834 c344bf7c c344bf40 c00087ac bf006010 [ 3.987976] bf40: 0000000f bf003834 00067f39 00000000 00005c44 bf003834 00067f39 00000000 [ 4.010711] bf60: 00005c44 c000e024 c344a000 00000000 c344bfa4 c344bf80 c004c35c c0008720 [ 4.033569] bf80: c344bfac c344bf90 01422192 01427ea0 00000000 00000080 00000000 c344bfa8 [ 4.056518] bfa0: c000dec0 c004c2f0 01422192 01427ea0 01427ea0 00005c44 00067f39 00000000 [ 4.079406] bfc0: 01422192 01427ea0 00000000 00000080 b6e11008 014221aa be941fcc b6e1e008 [ 4.102569] bfe0: b6ef6300 be941758 0000e93c b6ef6310 60000010 01427ea0 00000000 00000000 [ 4.125946] Backtrace: [ 4.143463] [<bf0030e4>] (ohci_omap_init+0x0/0x144 [ohci_hcd]) from [<c0150ff0>] (usb_add_hcd+0x1b8/0x61c) [ 4.183898] r6:c049e62c r5:00000000 r4:c342d620 r3:bf0030e4 [ 4.205596] [<c0150e38>] (usb_add_hcd+0x0/0x61c) from [<bf001bf0>] (ohci_hcd_omap_drv_probe+0x17c/0x224 [ohci_hcd]) [ 4.248138] [<bf001a74>] (ohci_hcd_omap_drv_probe+0x0/0x224 [ohci_hcd]) from [<c012d968>] (platform_drv_probe+0x1c/0x20) [ 4.292144] r8:c000e024 r7:c012ca04 r6:bf0037f8 r5:c048a4ac r4:c048a478 [ 4.316192] [<c012d94c>] (platform_drv_probe+0x0/0x20) from [<c012c8ac>] (driver_probe_device+0xb0/0x208) [ 4.360168] [<c012c7fc>] (driver_probe_device+0x0/0x208) from [<c012ca74>] (__driver_attach+0x70/0x94) [ 4.405548] r6:bf0037f8 r5:c048a4ac r4:c048a478 r3:00000000 [ 4.429809] [<c012ca04>] (__driver_attach+0x0/0x94) from [<c012b038>] (bus_for_each_dev+0x54/0x90) [ 4.475708] r6:bf0037f8 r5:c344be88 r4:00000000 r3:20000013 [ 4.500366] [<c012afe4>] (bus_for_each_dev+0x0/0x90) from [<c012c40c>] (driver_attach+0x20/0x28) [ 4.528442] r7:00000000 r6:c049d5e8 r5:c35be5a0 r4:bf0037f8 [ 4.553466] [<c012c3ec>] (driver_attach+0x0/0x28) from [<c012bfc0>] (bus_add_driver+0xd4/0x228) [ 4.581878] [<c012beec>] (bus_add_driver+0x0/0x228) from [<c012cd54>] (driver_register+0xa4/0x134) [ 4.629730] r8:c000e024 r7:00005c44 r6:00000000 r5:00067f39 r4:bf0037f8 [ 4.656738] [<c012ccb0>] (driver_register+0x0/0x134) from [<c012db14>] (platform_driver_register+0x4c/0x60) [ 4.706542] [<c012dac8>] (platform_driver_register+0x0/0x60) from [<bf00604c>] (ohci_hcd_mod_init+0x4c/0x8c [ohci_hcd]) [ 4.757843] [<bf006000>] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [<c00087ac>] (do_one_initcall+0x9c/0x174) [ 4.808990] r4:bf003834 r3:c344a000 [ 4.832641] [<c0008710>] (do_one_initcall+0x0/0x174) from [<c004c35c>] (sys_init_module+0x7c/0x194) [ 4.881530] [<c004c2e0>] (sys_init_module+0x0/0x194) from [<c000dec0>] (ret_fast_syscall+0x0/0x2c) [ 4.930664] r7:00000080 r6:00000000 r5:01427ea0 r4:01422192 [ 4.956481] Code: bad PC value [ 4.978729] ---[ end trace 58280240f08342c4 ]--- [ 5.002258] Kernel panic - not syncing: Fatal exception Fix this by taking a copy of the data. Also mark Amstrad E3's data with __initdata to save some memory with multi-board kernels. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-22 04:56:32 +08:00
static struct omap_usb_config ams_delta_usb_config __initdata = {
.register_host = 1,
.hmc_mode = 16,
.pins[0] = 2,
};
#define LATCH1_GPIO_BASE 232
#define LATCH1_NGPIO 8
static struct resource latch1_resources[] = {
[0] = {
.name = "dat",
.start = LATCH1_PHYS,
.end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
.flags = IORESOURCE_MEM,
},
};
static struct bgpio_pdata latch1_pdata = {
.base = LATCH1_GPIO_BASE,
.ngpio = LATCH1_NGPIO,
};
static struct platform_device latch1_gpio_device = {
.name = "basic-mmio-gpio",
.id = 0,
.resource = latch1_resources,
.num_resources = ARRAY_SIZE(latch1_resources),
.dev = {
.platform_data = &latch1_pdata,
},
};
static struct resource latch2_resources[] = {
[0] = {
.name = "dat",
.start = LATCH2_PHYS,
.end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
.flags = IORESOURCE_MEM,
},
};
static struct bgpio_pdata latch2_pdata = {
.base = AMS_DELTA_LATCH2_GPIO_BASE,
.ngpio = AMS_DELTA_LATCH2_NGPIO,
};
static struct platform_device latch2_gpio_device = {
.name = "basic-mmio-gpio",
.id = 1,
.resource = latch2_resources,
.num_resources = ARRAY_SIZE(latch2_resources),
.dev = {
.platform_data = &latch2_pdata,
},
};
static const struct gpio latch_gpios[] __initconst = {
{
.gpio = LATCH1_GPIO_BASE + 6,
.flags = GPIOF_OUT_INIT_LOW,
.label = "dockit1",
},
{
.gpio = LATCH1_GPIO_BASE + 7,
.flags = GPIOF_OUT_INIT_LOW,
.label = "dockit2",
},
{
.gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
.flags = GPIOF_OUT_INIT_LOW,
.label = "scard_rstin",
},
{
.gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
.flags = GPIOF_OUT_INIT_LOW,
.label = "scard_cmdvcc",
},
{
.gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC,
.flags = GPIOF_OUT_INIT_LOW,
.label = "modem_codec",
},
{
.gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
.flags = GPIOF_OUT_INIT_LOW,
.label = "hookflash1",
},
{
.gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
.flags = GPIOF_OUT_INIT_LOW,
.label = "hookflash2",
},
};
ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin The Amstrad Delta on-board latch2 bit named MODEM_NRESET, now available as a GPIO pin AMS_DELTA_GPIO_PIN_NMODEM_RESET, is used to power up/down (bring into/out of a reset state) two distinct on-board devices simultaneously: the modem, and the voice codec. As a consequence, that bit is, or can be, manipulated concurrently by two drivers, or their platform provided hooks. Instead of updating those drivers to use the gpiolib API as a new method of controlling the MODEM_NRESET pin state, like it was done to other drivers accessing latch2 pins, and still being vulnerable to potential concurrency conflicts, or trying to solve that sharing issue with a custom piece of code, set up a fixed regulator device on top of that GPIO pin, with the intention of updating both drivers to manipulate that regulator, not the GPIO pin directly. Before the ASoC driver is updated and the modem platform data expanded with a power management callback for switching its power, the ams_delta_latch_write() function, which still provides the old API for accessing latch2 functionality from not updated drivers, is modified to toggle the regulator instead of the MODEM_NRESET GPIO pin. A helper function provided for balancing the regulator enable/disable operations, together with the consumer data needed for tracking the regulator state, will be removed once the drivers are updated. Depends on patch series "ARM: OMAP1: ams-delta: replace custom I/O with GPIO". Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-06 00:05:10 +08:00
static struct regulator_consumer_supply modem_nreset_consumers[] = {
REGULATOR_SUPPLY("RESET#", "serial8250.1"),
REGULATOR_SUPPLY("POR", "cx20442-codec"),
};
static struct regulator_init_data modem_nreset_data = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers),
.consumer_supplies = modem_nreset_consumers,
};
static struct fixed_voltage_config modem_nreset_config = {
.supply_name = "modem_nreset",
.microvolts = 3300000,
.gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
.startup_delay = 25000,
.enable_high = 1,
.enabled_at_boot = 1,
.init_data = &modem_nreset_data,
};
static struct platform_device modem_nreset_device = {
.name = "reg-fixed-voltage",
.id = -1,
.dev = {
.platform_data = &modem_nreset_config,
},
};
struct modem_private_data {
struct regulator *regulator;
};
static struct modem_private_data modem_priv;
void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
{
int bit = 0;
u16 bitpos = 1 << bit;
for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
if (!(mask & bitpos))
continue;
ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin The Amstrad Delta on-board latch2 bit named MODEM_NRESET, now available as a GPIO pin AMS_DELTA_GPIO_PIN_NMODEM_RESET, is used to power up/down (bring into/out of a reset state) two distinct on-board devices simultaneously: the modem, and the voice codec. As a consequence, that bit is, or can be, manipulated concurrently by two drivers, or their platform provided hooks. Instead of updating those drivers to use the gpiolib API as a new method of controlling the MODEM_NRESET pin state, like it was done to other drivers accessing latch2 pins, and still being vulnerable to potential concurrency conflicts, or trying to solve that sharing issue with a custom piece of code, set up a fixed regulator device on top of that GPIO pin, with the intention of updating both drivers to manipulate that regulator, not the GPIO pin directly. Before the ASoC driver is updated and the modem platform data expanded with a power management callback for switching its power, the ams_delta_latch_write() function, which still provides the old API for accessing latch2 functionality from not updated drivers, is modified to toggle the regulator instead of the MODEM_NRESET GPIO pin. A helper function provided for balancing the regulator enable/disable operations, together with the consumer data needed for tracking the regulator state, will be removed once the drivers are updated. Depends on patch series "ARM: OMAP1: ams-delta: replace custom I/O with GPIO". Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-06 00:05:10 +08:00
else
gpio_set_value(base + bit, (value & bitpos) != 0);
}
}
EXPORT_SYMBOL(ams_delta_latch_write);
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
.end = OMAP1_MPUIO_BASE +
OMAP_MPUIO_IO_CNTL + sizeof(u32) - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device ams_delta_nand_device = {
.name = "ams-delta-nand",
.id = -1,
.num_resources = ARRAY_SIZE(ams_delta_nand_resources),
.resource = ams_delta_nand_resources,
};
static struct resource ams_delta_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static const struct matrix_keymap_data ams_delta_keymap_data = {
.keymap = ams_delta_keymap,
.keymap_size = ARRAY_SIZE(ams_delta_keymap),
};
static struct omap_kp_platform_data ams_delta_kp_data = {
.rows = 8,
.cols = 8,
.keymap_data = &ams_delta_keymap_data,
.delay = 9,
};
static struct platform_device ams_delta_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &ams_delta_kp_data,
},
.num_resources = ARRAY_SIZE(ams_delta_kp_resources),
.resource = ams_delta_kp_resources,
};
static struct platform_device ams_delta_lcd_device = {
.name = "lcd_ams_delta",
.id = -1,
};
static const struct gpio_led gpio_leds[] __initconst = {
{
.name = "camera",
.gpio = LATCH1_GPIO_BASE + 0,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
#ifdef CONFIG_LEDS_TRIGGERS
.default_trigger = "ams_delta_camera",
#endif
},
{
.name = "advert",
.gpio = LATCH1_GPIO_BASE + 1,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
{
.name = "email",
.gpio = LATCH1_GPIO_BASE + 2,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
{
.name = "handsfree",
.gpio = LATCH1_GPIO_BASE + 3,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
{
.name = "voicemail",
.gpio = LATCH1_GPIO_BASE + 4,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
{
.name = "voice",
.gpio = LATCH1_GPIO_BASE + 5,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
};
static const struct gpio_led_platform_data leds_pdata __initconst = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct i2c_board_info ams_delta_camera_board_info[] = {
{
I2C_BOARD_INFO("ov6650", 0x60),
},
};
#ifdef CONFIG_LEDS_TRIGGERS
DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
static int ams_delta_camera_power(struct device *dev, int power)
{
/*
* turn on camera LED
*/
if (power)
led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
else
led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
return 0;
}
#else
#define ams_delta_camera_power NULL
#endif
static struct soc_camera_link ams_delta_iclink = {
.bus_id = 0, /* OMAP1 SoC camera bus */
.i2c_adapter_id = 1,
.board_info = &ams_delta_camera_board_info[0],
.module_name = "ov6650",
.power = ams_delta_camera_power,
};
static struct platform_device ams_delta_camera_device = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &ams_delta_iclink,
},
};
static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
.camexclk_khz = 12000, /* default 12MHz clock, no extra DPLL */
.lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */
};
static struct platform_device ams_delta_audio_device = {
.name = "ams-delta-audio",
.id = -1,
};
static struct platform_device cx20442_codec_device = {
.name = "cx20442-codec",
.id = -1,
};
static struct platform_device *ams_delta_devices[] __initdata = {
&latch1_gpio_device,
&latch2_gpio_device,
&ams_delta_kp_device,
&ams_delta_camera_device,
&ams_delta_audio_device,
};
static struct platform_device *late_devices[] __initdata = {
ARM: OMAP1: ams-delta: register latch dependent devices later In preparation to converting Amstrad Delta on-board latches to basic_mmio_gpio devices, registration of platform devices which depend on latches and will require initialization of their GPIO pins first, should be moved out of .machine_init down to late_initcall level, as the gpio-generic driver is not available until device_initcall time. The latch reset operation, which will be replaced with GPIO initialization, must also be moved to late_initcall for the same reason. Since there was already another, separate arch_initcall function for setting up one of those latch dependent devices, the on-board modem device, reuse that function, i.e., rename it to a name that matches the new purpose, extend with other device setup relocated from .machine_init, and move down to the late_initcall level. While being at it, add missing gpio_free() in case the modem platform device registration fails. Thanks to Tony Lindgren <tony@atomide.com> who suggested this approach instead of shifting up the gpio-generic driver initialization. In addition, defer registration of the Amstrad Delta ASoC and serio devices, done from their device driver files, until late_initcall time, as those drivers will depend on their GPIO pins already requested from the board late_init() function until updated to register their GPIO pins themselves. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-21 05:54:18 +08:00
&ams_delta_nand_device,
&ams_delta_lcd_device,
&cx20442_codec_device,
};
static void __init ams_delta_init(void)
{
/* mux pins for uarts */
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
/* parallel camera interface */
omap_cfg_reg(H19_1610_CAM_EXCLK);
omap_cfg_reg(J15_1610_CAM_LCLK);
omap_cfg_reg(L18_1610_CAM_VS);
omap_cfg_reg(L15_1610_CAM_HS);
omap_cfg_reg(L19_1610_CAM_D0);
omap_cfg_reg(K14_1610_CAM_D1);
omap_cfg_reg(K15_1610_CAM_D2);
omap_cfg_reg(K19_1610_CAM_D3);
omap_cfg_reg(K18_1610_CAM_D4);
omap_cfg_reg(J14_1610_CAM_D5);
omap_cfg_reg(J19_1610_CAM_D6);
omap_cfg_reg(J18_1610_CAM_D7);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap1_usb_init(&ams_delta_usb_config);
omap1_set_camera_info(&ams_delta_camera_platform_data);
#ifdef CONFIG_LEDS_TRIGGERS
led_trigger_register_simple("ams_delta_camera",
&ams_delta_camera_led_trigger);
#endif
gpio_led_register_device(-1, &leds_pdata);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
ams_delta_init_fiq();
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
omapfb_set_lcd_config(&ams_delta_lcd_config);
}
static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
{
struct modem_private_data *priv = port->private_data;
if (IS_ERR(priv->regulator))
return;
if (state == old)
return;
if (state == 0)
regulator_enable(priv->regulator);
else if (old == 0)
regulator_disable(priv->regulator);
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
.membase = IOMEM(MODEM_VIRT),
.mapbase = MODEM_PHYS,
.irq = -EINVAL, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
.irqflags = IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = BASE_BAUD * 16,
.pm = modem_pm,
.private_data = &modem_priv,
},
{ },
};
static struct platform_device ams_delta_modem_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = ams_delta_modem_ports,
},
};
ARM: OMAP1: ams-delta: register latch dependent devices later In preparation to converting Amstrad Delta on-board latches to basic_mmio_gpio devices, registration of platform devices which depend on latches and will require initialization of their GPIO pins first, should be moved out of .machine_init down to late_initcall level, as the gpio-generic driver is not available until device_initcall time. The latch reset operation, which will be replaced with GPIO initialization, must also be moved to late_initcall for the same reason. Since there was already another, separate arch_initcall function for setting up one of those latch dependent devices, the on-board modem device, reuse that function, i.e., rename it to a name that matches the new purpose, extend with other device setup relocated from .machine_init, and move down to the late_initcall level. While being at it, add missing gpio_free() in case the modem platform device registration fails. Thanks to Tony Lindgren <tony@atomide.com> who suggested this approach instead of shifting up the gpio-generic driver initialization. In addition, defer registration of the Amstrad Delta ASoC and serio devices, done from their device driver files, until late_initcall time, as those drivers will depend on their GPIO pins already requested from the board late_init() function until updated to register their GPIO pins themselves. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-21 05:54:18 +08:00
static int __init late_init(void)
{
int err;
if (!machine_is_ams_delta())
return -ENODEV;
err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
if (err) {
pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
return err;
}
ARM: OMAP1: ams-delta: register latch dependent devices later In preparation to converting Amstrad Delta on-board latches to basic_mmio_gpio devices, registration of platform devices which depend on latches and will require initialization of their GPIO pins first, should be moved out of .machine_init down to late_initcall level, as the gpio-generic driver is not available until device_initcall time. The latch reset operation, which will be replaced with GPIO initialization, must also be moved to late_initcall for the same reason. Since there was already another, separate arch_initcall function for setting up one of those latch dependent devices, the on-board modem device, reuse that function, i.e., rename it to a name that matches the new purpose, extend with other device setup relocated from .machine_init, and move down to the late_initcall level. While being at it, add missing gpio_free() in case the modem platform device registration fails. Thanks to Tony Lindgren <tony@atomide.com> who suggested this approach instead of shifting up the gpio-generic driver initialization. In addition, defer registration of the Amstrad Delta ASoC and serio devices, done from their device driver files, until late_initcall time, as those drivers will depend on their GPIO pins already requested from the board late_init() function until updated to register their GPIO pins themselves. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-21 05:54:18 +08:00
platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin The Amstrad Delta on-board latch2 bit named MODEM_NRESET, now available as a GPIO pin AMS_DELTA_GPIO_PIN_NMODEM_RESET, is used to power up/down (bring into/out of a reset state) two distinct on-board devices simultaneously: the modem, and the voice codec. As a consequence, that bit is, or can be, manipulated concurrently by two drivers, or their platform provided hooks. Instead of updating those drivers to use the gpiolib API as a new method of controlling the MODEM_NRESET pin state, like it was done to other drivers accessing latch2 pins, and still being vulnerable to potential concurrency conflicts, or trying to solve that sharing issue with a custom piece of code, set up a fixed regulator device on top of that GPIO pin, with the intention of updating both drivers to manipulate that regulator, not the GPIO pin directly. Before the ASoC driver is updated and the modem platform data expanded with a power management callback for switching its power, the ams_delta_latch_write() function, which still provides the old API for accessing latch2 functionality from not updated drivers, is modified to toggle the regulator instead of the MODEM_NRESET GPIO pin. A helper function provided for balancing the regulator enable/disable operations, together with the consumer data needed for tracking the regulator state, will be removed once the drivers are updated. Depends on patch series "ARM: OMAP1: ams-delta: replace custom I/O with GPIO". Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-06 00:05:10 +08:00
err = platform_device_register(&modem_nreset_device);
if (err) {
pr_err("Couldn't register the modem regulator device\n");
return err;
}
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq =
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
if (err) {
pr_err("Couldn't request gpio pin for modem\n");
return err;
}
gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin The Amstrad Delta on-board latch2 bit named MODEM_NRESET, now available as a GPIO pin AMS_DELTA_GPIO_PIN_NMODEM_RESET, is used to power up/down (bring into/out of a reset state) two distinct on-board devices simultaneously: the modem, and the voice codec. As a consequence, that bit is, or can be, manipulated concurrently by two drivers, or their platform provided hooks. Instead of updating those drivers to use the gpiolib API as a new method of controlling the MODEM_NRESET pin state, like it was done to other drivers accessing latch2 pins, and still being vulnerable to potential concurrency conflicts, or trying to solve that sharing issue with a custom piece of code, set up a fixed regulator device on top of that GPIO pin, with the intention of updating both drivers to manipulate that regulator, not the GPIO pin directly. Before the ASoC driver is updated and the modem platform data expanded with a power management callback for switching its power, the ams_delta_latch_write() function, which still provides the old API for accessing latch2 functionality from not updated drivers, is modified to toggle the regulator instead of the MODEM_NRESET GPIO pin. A helper function provided for balancing the regulator enable/disable operations, together with the consumer data needed for tracking the regulator state, will be removed once the drivers are updated. Depends on patch series "ARM: OMAP1: ams-delta: replace custom I/O with GPIO". Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-06 00:05:10 +08:00
/* Initialize the modem_nreset regulator consumer before use */
modem_priv.regulator = ERR_PTR(-ENODEV);
ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
AMS_DELTA_LATCH2_MODEM_CODEC);
ARM: OMAP1: ams-delta: register latch dependent devices later In preparation to converting Amstrad Delta on-board latches to basic_mmio_gpio devices, registration of platform devices which depend on latches and will require initialization of their GPIO pins first, should be moved out of .machine_init down to late_initcall level, as the gpio-generic driver is not available until device_initcall time. The latch reset operation, which will be replaced with GPIO initialization, must also be moved to late_initcall for the same reason. Since there was already another, separate arch_initcall function for setting up one of those latch dependent devices, the on-board modem device, reuse that function, i.e., rename it to a name that matches the new purpose, extend with other device setup relocated from .machine_init, and move down to the late_initcall level. While being at it, add missing gpio_free() in case the modem platform device registration fails. Thanks to Tony Lindgren <tony@atomide.com> who suggested this approach instead of shifting up the gpio-generic driver initialization. In addition, defer registration of the Amstrad Delta ASoC and serio devices, done from their device driver files, until late_initcall time, as those drivers will depend on their GPIO pins already requested from the board late_init() function until updated to register their GPIO pins themselves. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-21 05:54:18 +08:00
err = platform_device_register(&ams_delta_modem_device);
if (err)
goto gpio_free;
ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin The Amstrad Delta on-board latch2 bit named MODEM_NRESET, now available as a GPIO pin AMS_DELTA_GPIO_PIN_NMODEM_RESET, is used to power up/down (bring into/out of a reset state) two distinct on-board devices simultaneously: the modem, and the voice codec. As a consequence, that bit is, or can be, manipulated concurrently by two drivers, or their platform provided hooks. Instead of updating those drivers to use the gpiolib API as a new method of controlling the MODEM_NRESET pin state, like it was done to other drivers accessing latch2 pins, and still being vulnerable to potential concurrency conflicts, or trying to solve that sharing issue with a custom piece of code, set up a fixed regulator device on top of that GPIO pin, with the intention of updating both drivers to manipulate that regulator, not the GPIO pin directly. Before the ASoC driver is updated and the modem platform data expanded with a power management callback for switching its power, the ams_delta_latch_write() function, which still provides the old API for accessing latch2 functionality from not updated drivers, is modified to toggle the regulator instead of the MODEM_NRESET GPIO pin. A helper function provided for balancing the regulator enable/disable operations, together with the consumer data needed for tracking the regulator state, will be removed once the drivers are updated. Depends on patch series "ARM: OMAP1: ams-delta: replace custom I/O with GPIO". Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-06 00:05:10 +08:00
/*
* Once the modem device is registered, the modem_nreset
* regulator can be requested on behalf of that device.
*/
modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
"RESET#");
if (IS_ERR(modem_priv.regulator)) {
err = PTR_ERR(modem_priv.regulator);
goto unregister;
}
ARM: OMAP1: ams-delta: register latch dependent devices later In preparation to converting Amstrad Delta on-board latches to basic_mmio_gpio devices, registration of platform devices which depend on latches and will require initialization of their GPIO pins first, should be moved out of .machine_init down to late_initcall level, as the gpio-generic driver is not available until device_initcall time. The latch reset operation, which will be replaced with GPIO initialization, must also be moved to late_initcall for the same reason. Since there was already another, separate arch_initcall function for setting up one of those latch dependent devices, the on-board modem device, reuse that function, i.e., rename it to a name that matches the new purpose, extend with other device setup relocated from .machine_init, and move down to the late_initcall level. While being at it, add missing gpio_free() in case the modem platform device registration fails. Thanks to Tony Lindgren <tony@atomide.com> who suggested this approach instead of shifting up the gpio-generic driver initialization. In addition, defer registration of the Amstrad Delta ASoC and serio devices, done from their device driver files, until late_initcall time, as those drivers will depend on their GPIO pins already requested from the board late_init() function until updated to register their GPIO pins themselves. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-21 05:54:18 +08:00
return 0;
ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin The Amstrad Delta on-board latch2 bit named MODEM_NRESET, now available as a GPIO pin AMS_DELTA_GPIO_PIN_NMODEM_RESET, is used to power up/down (bring into/out of a reset state) two distinct on-board devices simultaneously: the modem, and the voice codec. As a consequence, that bit is, or can be, manipulated concurrently by two drivers, or their platform provided hooks. Instead of updating those drivers to use the gpiolib API as a new method of controlling the MODEM_NRESET pin state, like it was done to other drivers accessing latch2 pins, and still being vulnerable to potential concurrency conflicts, or trying to solve that sharing issue with a custom piece of code, set up a fixed regulator device on top of that GPIO pin, with the intention of updating both drivers to manipulate that regulator, not the GPIO pin directly. Before the ASoC driver is updated and the modem platform data expanded with a power management callback for switching its power, the ams_delta_latch_write() function, which still provides the old API for accessing latch2 functionality from not updated drivers, is modified to toggle the regulator instead of the MODEM_NRESET GPIO pin. A helper function provided for balancing the regulator enable/disable operations, together with the consumer data needed for tracking the regulator state, will be removed once the drivers are updated. Depends on patch series "ARM: OMAP1: ams-delta: replace custom I/O with GPIO". Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-06 00:05:10 +08:00
unregister:
platform_device_unregister(&ams_delta_modem_device);
ARM: OMAP1: ams-delta: register latch dependent devices later In preparation to converting Amstrad Delta on-board latches to basic_mmio_gpio devices, registration of platform devices which depend on latches and will require initialization of their GPIO pins first, should be moved out of .machine_init down to late_initcall level, as the gpio-generic driver is not available until device_initcall time. The latch reset operation, which will be replaced with GPIO initialization, must also be moved to late_initcall for the same reason. Since there was already another, separate arch_initcall function for setting up one of those latch dependent devices, the on-board modem device, reuse that function, i.e., rename it to a name that matches the new purpose, extend with other device setup relocated from .machine_init, and move down to the late_initcall level. While being at it, add missing gpio_free() in case the modem platform device registration fails. Thanks to Tony Lindgren <tony@atomide.com> who suggested this approach instead of shifting up the gpio-generic driver initialization. In addition, defer registration of the Amstrad Delta ASoC and serio devices, done from their device driver files, until late_initcall time, as those drivers will depend on their GPIO pins already requested from the board late_init() function until updated to register their GPIO pins themselves. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-21 05:54:18 +08:00
gpio_free:
gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
return err;
}
static void __init ams_delta_init_late(void)
{
omap1_init_late();
late_init();
}
static void __init ams_delta_map_io(void)
{
omap15xx_map_io();
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
}
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
.atag_offset = 0x100,
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.init_late = ams_delta_init_late,
.init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END