renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
Code
4d93824561
linux-next/drivers/misc/mic/Kconfig

153 lines
5.5 KiB
Plaintext
Raw Normal View History

misc: mic: add a bus driver for virtual MIC devices This MIC virtual bus driver takes the responsibility of creating all the virtual devices connected to the PCIe device on the host and the platform device on the card. The MIC bus hardware operations provide a way to abstract certain hardware details from the base physical devices. Examples of devices added on the MIC virtual bus include host DMA and card DMA. This abstraction enables using a common DMA driver on host and card. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Siva Yerramreddy <yshivakrishna@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-12 05:04:20 +08:00
comment "Intel MIC Bus Driver"
config INTEL_MIC_BUS
tristate "Intel MIC Bus Driver"
depends on 64BIT && PCI && X86 && X86_DEV_DMA_OPS
help
This option is selected by any driver which registers a
device or driver on the MIC Bus, such as CONFIG_INTEL_MIC_HOST,
CONFIG_INTEL_MIC_CARD, CONFIG_INTEL_MIC_X100_DMA etc.
If you are building a host/card kernel with an Intel MIC device
then say M (recommended) or Y, else say N. If unsure say N.
More information about the Intel MIC family as well as the Linux
OS and tools for MIC to use with this driver are available from
<http://software.intel.com/en-us/mic-developer>.
misc: mic: SCIF Hardware Bus The SCIF hardware bus abstracts the low level hardware driver details like interrupts and mapping remote memory so that the same SCIF driver can work without any changes with the MIC host or card driver as long as the hardware bus operations are implemented. The SCIF hardware device is registered by the host and card drivers on the SCIF hardware bus resulting in probing the SCIF driver. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-29 20:32:30 +08:00
comment "SCIF Bus Driver"
config SCIF_BUS
tristate "SCIF Bus Driver"
depends on 64BIT && PCI && X86 && X86_DEV_DMA_OPS
help
This option is selected by any driver which registers a
device or driver on the SCIF Bus, such as CONFIG_INTEL_MIC_HOST
and CONFIG_INTEL_MIC_CARD.
If you are building a host/card kernel with an Intel MIC device
then say M (recommended) or Y, else say N. If unsure say N.
More information about the Intel MIC family as well as the Linux
misc: mic: MIC VOP Bus The Virtio Over PCIe (VOP) bus abstracts the low level hardware details like interrupts and mapping remote memory so that the same VOP driver can work without changes with different MIC host or card drivers as long as the hardware bus operations are implemented. The VOP driver registers itself on the VOP bus. The base PCIe drivers implement the bus ops and register VOP devices on the bus, resulting in the VOP driver being probed with the VOP devices. This allows the VOP functionality to be shared between multiple generations of Intel MIC products. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-09 07:48:13 +08:00
OS and tools for MIC to use with this driver are available from
<http://software.intel.com/en-us/mic-developer>.
comment "VOP Bus Driver"
config VOP_BUS
tristate "VOP Bus Driver"
depends on 64BIT && PCI && X86 && X86_DEV_DMA_OPS
help
This option is selected by any driver which registers a
device or driver on the VOP Bus, such as CONFIG_INTEL_MIC_HOST
and CONFIG_INTEL_MIC_CARD.
If you are building a host/card kernel with an Intel MIC device
then say M (recommended) or Y, else say N. If unsure say N.
More information about the Intel MIC family as well as the Linux
misc: mic: SCIF Hardware Bus The SCIF hardware bus abstracts the low level hardware driver details like interrupts and mapping remote memory so that the same SCIF driver can work without any changes with the MIC host or card driver as long as the hardware bus operations are implemented. The SCIF hardware device is registered by the host and card drivers on the SCIF hardware bus resulting in probing the SCIF driver. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-29 20:32:30 +08:00
OS and tools for MIC to use with this driver are available from
<http://software.intel.com/en-us/mic-developer>.
Intel MIC Host Driver for X100 family. This patch enables the following: a) Initializes the Intel MIC X100 PCIe devices. b) Provides sysfs entries for family and stepping information. Co-author: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com> Signed-off-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-06 07:41:31 +08:00
comment "Intel MIC Host Driver"
config INTEL_MIC_HOST
tristate "Intel MIC Host Driver"
misc: mic: MIC host and card driver changes to enable VOP This patch modifies the MIC host and card drivers to start using the VOP driver. The MIC host and card drivers now implement the VOP bus operations and register a VOP device on the VOP bus. MIC driver stack documentation is also updated to include the new VOP driver. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-09 07:48:18 +08:00
depends on 64BIT && PCI && X86
depends on INTEL_MIC_BUS && SCIF_BUS && MIC_COSM && VOP_BUS
Intel MIC Host Driver for X100 family. This patch enables the following: a) Initializes the Intel MIC X100 PCIe devices. b) Provides sysfs entries for family and stepping information. Co-author: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com> Signed-off-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-06 07:41:31 +08:00
help
This enables Host Driver support for the Intel Many Integrated
Core (MIC) family of PCIe form factor coprocessor devices that
run a 64 bit Linux OS. The driver manages card OS state and
enables communication between host and card. Intel MIC X100
devices are currently supported.
If you are building a host kernel with an Intel MIC device then
say M (recommended) or Y, else say N. If unsure say N.
More information about the Intel MIC family as well as the Linux
OS and tools for MIC to use with this driver are available from
<http://software.intel.com/en-us/mic-developer>.
Intel MIC Card Driver for X100 family. This patch does the following: a) Initializes the Intel MIC X100 platform device and driver. b) Sets up support to handle shutdown requests from the host. c) Maps the device page after obtaining the device page address from the scratchpad registers updated by the host. d) Informs the host upon a card crash by registering a panic notifier. e) Informs the host upon a poweroff/halt event. Co-author: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-06 07:42:06 +08:00
comment "Intel MIC Card Driver"
config INTEL_MIC_CARD
tristate "Intel MIC Card Driver"
misc: mic: MIC host and card driver changes to enable VOP This patch modifies the MIC host and card drivers to start using the VOP driver. The MIC host and card drivers now implement the VOP bus operations and register a VOP device on the VOP bus. MIC driver stack documentation is also updated to include the new VOP driver. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-09 07:48:18 +08:00
depends on 64BIT && X86
depends on INTEL_MIC_BUS && SCIF_BUS && MIC_COSM && VOP_BUS
Intel MIC Card Driver Changes for Virtio Devices. This patch introduces the card "Virtio over PCIe" interface for Intel MIC. It allows virtio drivers on the card to communicate with their user space backends on the host via a device page. Ring 3 apps on the host can add, remove and configure virtio devices. A thin MIC specific virtio_config_ops is implemented which is borrowed heavily from previous similar implementations in lguest and s390 @ drivers/lguest/lguest_device.c drivers/s390/kvm/kvm_virtio.c Co-author: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-06 07:42:28 +08:00
select VIRTIO
Intel MIC Card Driver for X100 family. This patch does the following: a) Initializes the Intel MIC X100 platform device and driver. b) Sets up support to handle shutdown requests from the host. c) Maps the device page after obtaining the device page address from the scratchpad registers updated by the host. d) Informs the host upon a card crash by registering a panic notifier. e) Informs the host upon a poweroff/halt event. Co-author: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-06 07:42:06 +08:00
help
This enables card driver support for the Intel Many Integrated
Core (MIC) device family. The card driver communicates shutdown/
crash events to the host and allows registration/configuration of
virtio devices. Intel MIC X100 devices are currently supported.
If you are building a card kernel for an Intel MIC device then
say M (recommended) or Y, else say N. If unsure say N.
For more information see
<http://software.intel.com/en-us/mic-developer>.
misc: mic: SCIF open close bind and listen APIs SCIF character device file operations and kernel APIs for opening and closing a user and kernel mode SCIF endpoint. This patch also enables binding to a SCIF port and listening for incoming SCIF connections. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-29 20:32:35 +08:00
comment "SCIF Driver"
config SCIF
tristate "SCIF Driver"
misc: mic: Fix SCIF build failure with IOMMU_SUPPORT disabled SCIF depends on IOVA which requires IOMMU_SUPPORT to be enabled. The long term fix is to move IOVA from drivers/iommu to lib/ but this current patch should fix the reported issue. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 04:38:40 +08:00
depends on 64BIT && PCI && X86 && SCIF_BUS && IOMMU_SUPPORT
misc: mic: SCIF RMA nodeqp and minor miscellaneous changes This patch adds the SCIF kernel node QP control messages required to enable SCIF RMAs. Examples of such node QP control messages include registration, unregistration, remote memory allocation requests, remote memory unmap and SCIF remote fence requests. The patch also updates the SCIF driver with minor changes required to enable SCIF RMAs by adding the new files to the build, initializing RMA specific information during SCIF endpoint creation, reserving SCIF DMA channels, initializing SCIF RMA specific global data structures, adding the IOCTL hooks required for SCIF RMAs and updating RMA specific debugfs hooks. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30 09:16:25 +08:00
select IOMMU_IOVA
misc: mic: SCIF open close bind and listen APIs SCIF character device file operations and kernel APIs for opening and closing a user and kernel mode SCIF endpoint. This patch also enables binding to a SCIF port and listening for incoming SCIF connections. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-29 20:32:35 +08:00
help
This enables SCIF Driver support for the Intel Many Integrated
Core (MIC) family of PCIe form factor coprocessor devices that
run a 64 bit Linux OS. The Symmetric Communication Interface
(SCIF (pronounced as skiff)) is a low level communications API
across PCIe currently implemented for MIC.
If you are building a host kernel with an Intel MIC device then
say M (recommended) or Y, else say N. If unsure say N.
More information about the Intel MIC family as well as the Linux
OS and tools for MIC to use with this driver are available from
<http://software.intel.com/en-us/mic-developer>.
misc: mic: MIC COSM bus The MIC COSM bus allows the co-processor state management (COSM) functionality to be shared between multiple generations of Intel MIC products. The COSM driver registers itself on the COSM bus. The base PCIe drivers implement the bus ops and register COSM devices on the bus, resulting in the COSM driver being probed with the COSM devices. COSM bus ops, e.g. start, stop, ready, reset, therefore abstract out common functionality from its specific implementation for individual generations of MIC products. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30 09:12:03 +08:00
comment "Intel MIC Coprocessor State Management (COSM) Drivers"
config MIC_COSM
tristate "Intel MIC Coprocessor State Management (COSM) Drivers"
depends on 64BIT && PCI && X86 && SCIF
help
This enables COSM driver support for the Intel Many
Integrated Core (MIC) family of PCIe form factor coprocessor
devices. COSM drivers implement functions such as boot,
shutdown, reset and reboot of MIC devices.
If you are building a host kernel with an Intel MIC device then
say M (recommended) or Y, else say N. If unsure say N.
More information about the Intel MIC family as well as the Linux
OS and tools for MIC to use with this driver are available from
<http://software.intel.com/en-us/mic-developer>.
misc: mic: Enable VOP debugfs and driver build This patch moves the virtio specific debugfs hooks previously in mic_debugfs.c in the MIC host driver into the VOP driver. The Kconfig/Makefile is also updated to allow building the VOP driver. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-09 07:48:17 +08:00
comment "VOP Driver"
config VOP
tristate "VOP Driver"
depends on 64BIT && PCI && X86 && VOP_BUS
select VHOST_RING
misc: mic: Fix randconfig build error Fixes randconfig build error reported at https://lkml.org/lkml/2016/4/3/135 by ensuring that the VOP driver selects VIRTIO. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-05 12:32:30 +08:00
select VIRTIO
misc: mic: Enable VOP debugfs and driver build This patch moves the virtio specific debugfs hooks previously in mic_debugfs.c in the MIC host driver into the VOP driver. The Kconfig/Makefile is also updated to allow building the VOP driver. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-09 07:48:17 +08:00
help
This enables VOP (Virtio over PCIe) Driver support for the Intel
Many Integrated Core (MIC) family of PCIe form factor coprocessor
devices. The VOP driver allows virtio drivers, e.g. net, console
and block drivers, on the card connect to user space virtio
devices on the host.
If you are building a host kernel with an Intel MIC device then
say M (recommended) or Y, else say N. If unsure say N.
More information about the Intel MIC family as well as the Linux
OS and tools for MIC to use with this driver are available from
<http://software.intel.com/en-us/mic-developer>.
vop: pull in vhost Kconfig VOP selects VHOST_RING. Pull in Kconfig that includes it to make it self-containing. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-02 07:56:01 +08:00
if VOP
vhost: split out vringh Kconfig vringh is pulled in by caif and mic, but the other vhost config does not need to be there. In particular, it makes no sense to have vhost net/scsi/sock under caif/mic. Create a separate Kconfig file and put vringh bits there. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-02 08:03:35 +08:00
source "drivers/vhost/Kconfig.vringh"
vop: pull in vhost Kconfig VOP selects VHOST_RING. Pull in Kconfig that includes it to make it self-containing. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-02 07:56:01 +08:00
endif
Copy Permalink