2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
linux-next/fs/dlm/lowcomms.c

1775 lines
43 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/******************************************************************************
*******************************************************************************
**
** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
** Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
**
**
*******************************************************************************
******************************************************************************/
/*
* lowcomms.c
*
* This is the "low-level" comms layer.
*
* It is responsible for sending/receiving messages
* from other nodes in the cluster.
*
* Cluster nodes are referred to by their nodeids. nodeids are
* simply 32 bit numbers to the locking module - if they need to
* be expanded for the cluster infrastructure then that is its
* responsibility. It is this layer's
* responsibility to resolve these into IP address or
* whatever it needs for inter-node communication.
*
* The comms level is two kernel threads that deal mainly with
* the receiving of messages from other nodes and passing them
* up to the mid-level comms layer (which understands the
* message format) for execution by the locking core, and
* a send thread which does all the setting up of connections
* to remote nodes and the sending of data. Threads are not allowed
* to send their own data because it may cause them to wait in times
* of high load. Also, this way, the sending thread can collect together
* messages bound for one node and send them in one block.
*
* lowcomms will choose to use either TCP or SCTP as its transport layer
* depending on the configuration variable 'protocol'. This should be set
* to 0 (default) for TCP or 1 for SCTP. It should be configured using a
* cluster-wide mechanism as it must be the same on all nodes of the cluster
* for the DLM to function.
*
*/
#include <asm/ioctls.h>
#include <net/sock.h>
#include <net/tcp.h>
#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/mutex.h>
#include <linux/sctp.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <net/sctp/sctp.h>
#include <net/ipv6.h>
#include "dlm_internal.h"
#include "lowcomms.h"
#include "midcomms.h"
#include "config.h"
#define NEEDED_RMEM (4*1024*1024)
#define CONN_HASH_SIZE 32
/* Number of messages to send before rescheduling */
#define MAX_SEND_MSG_COUNT 25
#define DLM_SHUTDOWN_WAIT_TIMEOUT msecs_to_jiffies(10000)
struct connection {
struct socket *sock; /* NULL if not connected */
uint32_t nodeid; /* So we know who we are in the list */
struct mutex sock_mutex;
unsigned long flags;
#define CF_READ_PENDING 1
#define CF_WRITE_PENDING 2
#define CF_INIT_PENDING 4
#define CF_IS_OTHERCON 5
#define CF_CLOSE 6
#define CF_APP_LIMITED 7
#define CF_CLOSING 8
#define CF_SHUTDOWN 9
#define CF_CONNECTED 10
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
struct list_head writequeue; /* List of outgoing writequeue_entries */
spinlock_t writequeue_lock;
void (*connect_action) (struct connection *); /* What to do to connect */
void (*shutdown_action)(struct connection *con); /* What to do to shutdown */
int retries;
#define MAX_CONNECT_RETRIES 3
struct hlist_node list;
struct connection *othercon;
struct work_struct rwork; /* Receive workqueue */
struct work_struct swork; /* Send workqueue */
wait_queue_head_t shutdown_wait; /* wait for graceful shutdown */
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
unsigned char *rx_buf;
int rx_buflen;
int rx_leftover;
struct rcu_head rcu;
};
#define sock2con(x) ((struct connection *)(x)->sk_user_data)
struct listen_connection {
struct socket *sock;
struct work_struct rwork;
};
#define DLM_WQ_REMAIN_BYTES(e) (PAGE_SIZE - e->end)
#define DLM_WQ_LENGTH_BYTES(e) (e->end - e->offset)
/* An entry waiting to be sent */
struct writequeue_entry {
struct list_head list;
struct page *page;
int offset;
int len;
int end;
int users;
struct connection *con;
};
struct dlm_node_addr {
struct list_head list;
int nodeid;
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
int mark;
int addr_count;
int curr_addr_index;
struct sockaddr_storage *addr[DLM_MAX_ADDR_COUNT];
};
static struct listen_sock_callbacks {
void (*sk_error_report)(struct sock *);
void (*sk_data_ready)(struct sock *);
void (*sk_state_change)(struct sock *);
void (*sk_write_space)(struct sock *);
} listen_sock;
static LIST_HEAD(dlm_node_addrs);
static DEFINE_SPINLOCK(dlm_node_addrs_spin);
static struct listen_connection listen_con;
static struct sockaddr_storage *dlm_local_addr[DLM_MAX_ADDR_COUNT];
static int dlm_local_count;
int dlm_allow_conn;
/* Work queues */
static struct workqueue_struct *recv_workqueue;
static struct workqueue_struct *send_workqueue;
static struct hlist_head connection_hash[CONN_HASH_SIZE];
static DEFINE_SPINLOCK(connections_lock);
DEFINE_STATIC_SRCU(connections_srcu);
static void process_recv_sockets(struct work_struct *work);
static void process_send_sockets(struct work_struct *work);
static void sctp_connect_to_sock(struct connection *con);
static void tcp_connect_to_sock(struct connection *con);
static void dlm_tcp_shutdown(struct connection *con);
/* This is deliberately very simple because most clusters have simple
sequential nodeids, so we should be able to go straight to a connection
struct in the array */
static inline int nodeid_hash(int nodeid)
{
return nodeid & (CONN_HASH_SIZE-1);
}
static struct connection *__find_con(int nodeid)
{
int r, idx;
struct connection *con;
r = nodeid_hash(nodeid);
idx = srcu_read_lock(&connections_srcu);
hlist_for_each_entry_rcu(con, &connection_hash[r], list) {
if (con->nodeid == nodeid) {
srcu_read_unlock(&connections_srcu, idx);
return con;
}
}
srcu_read_unlock(&connections_srcu, idx);
return NULL;
}
static int dlm_con_init(struct connection *con, int nodeid)
{
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
con->rx_buflen = dlm_config.ci_buffer_size;
con->rx_buf = kmalloc(con->rx_buflen, GFP_NOFS);
if (!con->rx_buf)
return -ENOMEM;
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
con->nodeid = nodeid;
mutex_init(&con->sock_mutex);
INIT_LIST_HEAD(&con->writequeue);
spin_lock_init(&con->writequeue_lock);
INIT_WORK(&con->swork, process_send_sockets);
INIT_WORK(&con->rwork, process_recv_sockets);
init_waitqueue_head(&con->shutdown_wait);
if (dlm_config.ci_protocol == 0) {
con->connect_action = tcp_connect_to_sock;
con->shutdown_action = dlm_tcp_shutdown;
} else {
con->connect_action = sctp_connect_to_sock;
}
return 0;
}
/*
* If 'allocation' is zero then we don't attempt to create a new
* connection structure for this node.
*/
static struct connection *nodeid2con(int nodeid, gfp_t alloc)
{
struct connection *con, *tmp;
int r, ret;
con = __find_con(nodeid);
if (con || !alloc)
return con;
con = kzalloc(sizeof(*con), alloc);
if (!con)
return NULL;
ret = dlm_con_init(con, nodeid);
if (ret) {
kfree(con);
return NULL;
}
r = nodeid_hash(nodeid);
spin_lock(&connections_lock);
/* Because multiple workqueues/threads calls this function it can
* race on multiple cpu's. Instead of locking hot path __find_con()
* we just check in rare cases of recently added nodes again
* under protection of connections_lock. If this is the case we
* abort our connection creation and return the existing connection.
*/
tmp = __find_con(nodeid);
if (tmp) {
spin_unlock(&connections_lock);
kfree(con->rx_buf);
kfree(con);
return tmp;
}
hlist_add_head_rcu(&con->list, &connection_hash[r]);
spin_unlock(&connections_lock);
return con;
}
/* Loop round all connections */
static void foreach_conn(void (*conn_func)(struct connection *c))
{
int i, idx;
struct connection *con;
idx = srcu_read_lock(&connections_srcu);
for (i = 0; i < CONN_HASH_SIZE; i++) {
hlist_for_each_entry_rcu(con, &connection_hash[i], list)
conn_func(con);
}
srcu_read_unlock(&connections_srcu, idx);
}
static struct dlm_node_addr *find_node_addr(int nodeid)
{
struct dlm_node_addr *na;
list_for_each_entry(na, &dlm_node_addrs, list) {
if (na->nodeid == nodeid)
return na;
}
return NULL;
}
static int addr_compare(const struct sockaddr_storage *x,
const struct sockaddr_storage *y)
{
switch (x->ss_family) {
case AF_INET: {
struct sockaddr_in *sinx = (struct sockaddr_in *)x;
struct sockaddr_in *siny = (struct sockaddr_in *)y;
if (sinx->sin_addr.s_addr != siny->sin_addr.s_addr)
return 0;
if (sinx->sin_port != siny->sin_port)
return 0;
break;
}
case AF_INET6: {
struct sockaddr_in6 *sinx = (struct sockaddr_in6 *)x;
struct sockaddr_in6 *siny = (struct sockaddr_in6 *)y;
if (!ipv6_addr_equal(&sinx->sin6_addr, &siny->sin6_addr))
return 0;
if (sinx->sin6_port != siny->sin6_port)
return 0;
break;
}
default:
return 0;
}
return 1;
}
static int nodeid_to_addr(int nodeid, struct sockaddr_storage *sas_out,
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
struct sockaddr *sa_out, bool try_new_addr,
unsigned int *mark)
{
struct sockaddr_storage sas;
struct dlm_node_addr *na;
if (!dlm_local_count)
return -1;
spin_lock(&dlm_node_addrs_spin);
na = find_node_addr(nodeid);
if (na && na->addr_count) {
memcpy(&sas, na->addr[na->curr_addr_index],
sizeof(struct sockaddr_storage));
if (try_new_addr) {
na->curr_addr_index++;
if (na->curr_addr_index == na->addr_count)
na->curr_addr_index = 0;
}
}
spin_unlock(&dlm_node_addrs_spin);
if (!na)
return -EEXIST;
if (!na->addr_count)
return -ENOENT;
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
*mark = na->mark;
if (sas_out)
memcpy(sas_out, &sas, sizeof(struct sockaddr_storage));
if (!sa_out)
return 0;
if (dlm_local_addr[0]->ss_family == AF_INET) {
struct sockaddr_in *in4 = (struct sockaddr_in *) &sas;
struct sockaddr_in *ret4 = (struct sockaddr_in *) sa_out;
ret4->sin_addr.s_addr = in4->sin_addr.s_addr;
} else {
struct sockaddr_in6 *in6 = (struct sockaddr_in6 *) &sas;
struct sockaddr_in6 *ret6 = (struct sockaddr_in6 *) sa_out;
ret6->sin6_addr = in6->sin6_addr;
}
return 0;
}
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
static int addr_to_nodeid(struct sockaddr_storage *addr, int *nodeid,
unsigned int *mark)
{
struct dlm_node_addr *na;
int rv = -EEXIST;
int addr_i;
spin_lock(&dlm_node_addrs_spin);
list_for_each_entry(na, &dlm_node_addrs, list) {
if (!na->addr_count)
continue;
for (addr_i = 0; addr_i < na->addr_count; addr_i++) {
if (addr_compare(na->addr[addr_i], addr)) {
*nodeid = na->nodeid;
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
*mark = na->mark;
rv = 0;
goto unlock;
}
}
}
unlock:
spin_unlock(&dlm_node_addrs_spin);
return rv;
}
/* caller need to held dlm_node_addrs_spin lock */
static bool dlm_lowcomms_na_has_addr(const struct dlm_node_addr *na,
const struct sockaddr_storage *addr)
{
int i;
for (i = 0; i < na->addr_count; i++) {
if (addr_compare(na->addr[i], addr))
return true;
}
return false;
}
int dlm_lowcomms_addr(int nodeid, struct sockaddr_storage *addr, int len)
{
struct sockaddr_storage *new_addr;
struct dlm_node_addr *new_node, *na;
bool ret;
new_node = kzalloc(sizeof(struct dlm_node_addr), GFP_NOFS);
if (!new_node)
return -ENOMEM;
new_addr = kzalloc(sizeof(struct sockaddr_storage), GFP_NOFS);
if (!new_addr) {
kfree(new_node);
return -ENOMEM;
}
memcpy(new_addr, addr, len);
spin_lock(&dlm_node_addrs_spin);
na = find_node_addr(nodeid);
if (!na) {
new_node->nodeid = nodeid;
new_node->addr[0] = new_addr;
new_node->addr_count = 1;
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
new_node->mark = dlm_config.ci_mark;
list_add(&new_node->list, &dlm_node_addrs);
spin_unlock(&dlm_node_addrs_spin);
return 0;
}
ret = dlm_lowcomms_na_has_addr(na, addr);
if (ret) {
spin_unlock(&dlm_node_addrs_spin);
kfree(new_addr);
kfree(new_node);
return -EEXIST;
}
if (na->addr_count >= DLM_MAX_ADDR_COUNT) {
spin_unlock(&dlm_node_addrs_spin);
kfree(new_addr);
kfree(new_node);
return -ENOSPC;
}
na->addr[na->addr_count++] = new_addr;
spin_unlock(&dlm_node_addrs_spin);
kfree(new_node);
return 0;
}
/* Data available on socket or listen socket received a connect */
static void lowcomms_data_ready(struct sock *sk)
{
struct connection *con;
read_lock_bh(&sk->sk_callback_lock);
con = sock2con(sk);
if (con && !test_and_set_bit(CF_READ_PENDING, &con->flags))
queue_work(recv_workqueue, &con->rwork);
read_unlock_bh(&sk->sk_callback_lock);
}
static void lowcomms_listen_data_ready(struct sock *sk)
{
queue_work(recv_workqueue, &listen_con.rwork);
}
static void lowcomms_write_space(struct sock *sk)
{
struct connection *con;
read_lock_bh(&sk->sk_callback_lock);
con = sock2con(sk);
if (!con)
goto out;
if (!test_and_set_bit(CF_CONNECTED, &con->flags)) {
log_print("successful connected to node %d", con->nodeid);
queue_work(send_workqueue, &con->swork);
goto out;
}
clear_bit(SOCK_NOSPACE, &con->sock->flags);
if (test_and_clear_bit(CF_APP_LIMITED, &con->flags)) {
con->sock->sk->sk_write_pending--;
clear_bit(SOCKWQ_ASYNC_NOSPACE, &con->sock->flags);
}
queue_work(send_workqueue, &con->swork);
out:
read_unlock_bh(&sk->sk_callback_lock);
}
static inline void lowcomms_connect_sock(struct connection *con)
{
if (test_bit(CF_CLOSE, &con->flags))
return;
queue_work(send_workqueue, &con->swork);
cond_resched();
}
static void lowcomms_state_change(struct sock *sk)
{
/* SCTP layer is not calling sk_data_ready when the connection
* is done, so we catch the signal through here. Also, it
* doesn't switch socket state when entering shutdown, so we
* skip the write in that case.
*/
if (sk->sk_shutdown) {
if (sk->sk_shutdown == RCV_SHUTDOWN)
lowcomms_data_ready(sk);
} else if (sk->sk_state == TCP_ESTABLISHED) {
lowcomms_write_space(sk);
}
}
int dlm_lowcomms_connect_node(int nodeid)
{
struct connection *con;
if (nodeid == dlm_our_nodeid())
return 0;
con = nodeid2con(nodeid, GFP_NOFS);
if (!con)
return -ENOMEM;
lowcomms_connect_sock(con);
return 0;
}
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
int dlm_lowcomms_nodes_set_mark(int nodeid, unsigned int mark)
{
struct dlm_node_addr *na;
spin_lock(&dlm_node_addrs_spin);
na = find_node_addr(nodeid);
if (!na) {
spin_unlock(&dlm_node_addrs_spin);
return -ENOENT;
}
na->mark = mark;
spin_unlock(&dlm_node_addrs_spin);
return 0;
}
static void lowcomms_error_report(struct sock *sk)
{
struct connection *con;
struct sockaddr_storage saddr;
void (*orig_report)(struct sock *) = NULL;
read_lock_bh(&sk->sk_callback_lock);
con = sock2con(sk);
if (con == NULL)
goto out;
orig_report = listen_sock.sk_error_report;
if (con->sock == NULL ||
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13 03:00:20 +08:00
kernel_getpeername(con->sock, (struct sockaddr *)&saddr) < 0) {
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
"sending to node %d, port %d, "
"sk_err=%d/%d\n", dlm_our_nodeid(),
con->nodeid, dlm_config.ci_tcp_port,
sk->sk_err, sk->sk_err_soft);
} else if (saddr.ss_family == AF_INET) {
struct sockaddr_in *sin4 = (struct sockaddr_in *)&saddr;
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
"sending to node %d at %pI4, port %d, "
"sk_err=%d/%d\n", dlm_our_nodeid(),
con->nodeid, &sin4->sin_addr.s_addr,
dlm_config.ci_tcp_port, sk->sk_err,
sk->sk_err_soft);
} else {
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&saddr;
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
"sending to node %d at %u.%u.%u.%u, "
"port %d, sk_err=%d/%d\n", dlm_our_nodeid(),
con->nodeid, sin6->sin6_addr.s6_addr32[0],
sin6->sin6_addr.s6_addr32[1],
sin6->sin6_addr.s6_addr32[2],
sin6->sin6_addr.s6_addr32[3],
dlm_config.ci_tcp_port, sk->sk_err,
sk->sk_err_soft);
}
out:
read_unlock_bh(&sk->sk_callback_lock);
if (orig_report)
orig_report(sk);
}
/* Note: sk_callback_lock must be locked before calling this function. */
static void save_listen_callbacks(struct socket *sock)
{
struct sock *sk = sock->sk;
listen_sock.sk_data_ready = sk->sk_data_ready;
listen_sock.sk_state_change = sk->sk_state_change;
listen_sock.sk_write_space = sk->sk_write_space;
listen_sock.sk_error_report = sk->sk_error_report;
}
static void restore_callbacks(struct socket *sock)
{
struct sock *sk = sock->sk;
write_lock_bh(&sk->sk_callback_lock);
sk->sk_user_data = NULL;
sk->sk_data_ready = listen_sock.sk_data_ready;
sk->sk_state_change = listen_sock.sk_state_change;
sk->sk_write_space = listen_sock.sk_write_space;
sk->sk_error_report = listen_sock.sk_error_report;
write_unlock_bh(&sk->sk_callback_lock);
}
static void add_listen_sock(struct socket *sock, struct listen_connection *con)
{
struct sock *sk = sock->sk;
write_lock_bh(&sk->sk_callback_lock);
save_listen_callbacks(sock);
con->sock = sock;
sk->sk_user_data = con;
sk->sk_allocation = GFP_NOFS;
/* Install a data_ready callback */
sk->sk_data_ready = lowcomms_listen_data_ready;
write_unlock_bh(&sk->sk_callback_lock);
}
/* Make a socket active */
static void add_sock(struct socket *sock, struct connection *con)
{
struct sock *sk = sock->sk;
write_lock_bh(&sk->sk_callback_lock);
con->sock = sock;
sk->sk_user_data = con;
/* Install a data_ready callback */
sk->sk_data_ready = lowcomms_data_ready;
sk->sk_write_space = lowcomms_write_space;
sk->sk_state_change = lowcomms_state_change;
sk->sk_allocation = GFP_NOFS;
sk->sk_error_report = lowcomms_error_report;
write_unlock_bh(&sk->sk_callback_lock);
}
/* Add the port number to an IPv6 or 4 sockaddr and return the address
length */
static void make_sockaddr(struct sockaddr_storage *saddr, uint16_t port,
int *addr_len)
{
saddr->ss_family = dlm_local_addr[0]->ss_family;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
if (saddr->ss_family == AF_INET) {
struct sockaddr_in *in4_addr = (struct sockaddr_in *)saddr;
in4_addr->sin_port = cpu_to_be16(port);
*addr_len = sizeof(struct sockaddr_in);
memset(&in4_addr->sin_zero, 0, sizeof(in4_addr->sin_zero));
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
} else {
struct sockaddr_in6 *in6_addr = (struct sockaddr_in6 *)saddr;
in6_addr->sin6_port = cpu_to_be16(port);
*addr_len = sizeof(struct sockaddr_in6);
}
memset((char *)saddr + *addr_len, 0, sizeof(struct sockaddr_storage) - *addr_len);
}
static void dlm_close_sock(struct socket **sock)
{
if (*sock) {
restore_callbacks(*sock);
sock_release(*sock);
*sock = NULL;
}
}
/* Close a remote connection and tidy up */
static void close_connection(struct connection *con, bool and_other,
bool tx, bool rx)
{
bool closing = test_and_set_bit(CF_CLOSING, &con->flags);
if (tx && !closing && cancel_work_sync(&con->swork)) {
log_print("canceled swork for node %d", con->nodeid);
clear_bit(CF_WRITE_PENDING, &con->flags);
}
if (rx && !closing && cancel_work_sync(&con->rwork)) {
log_print("canceled rwork for node %d", con->nodeid);
clear_bit(CF_READ_PENDING, &con->flags);
}
mutex_lock(&con->sock_mutex);
dlm_close_sock(&con->sock);
if (con->othercon && and_other) {
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
/* Will only re-enter once. */
close_connection(con->othercon, false, true, true);
}
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
con->rx_leftover = 0;
con->retries = 0;
clear_bit(CF_CONNECTED, &con->flags);
mutex_unlock(&con->sock_mutex);
clear_bit(CF_CLOSING, &con->flags);
}
static void shutdown_connection(struct connection *con)
{
int ret;
flush_work(&con->swork);
mutex_lock(&con->sock_mutex);
/* nothing to shutdown */
if (!con->sock) {
mutex_unlock(&con->sock_mutex);
return;
}
set_bit(CF_SHUTDOWN, &con->flags);
ret = kernel_sock_shutdown(con->sock, SHUT_WR);
mutex_unlock(&con->sock_mutex);
if (ret) {
log_print("Connection %p failed to shutdown: %d will force close",
con, ret);
goto force_close;
} else {
ret = wait_event_timeout(con->shutdown_wait,
!test_bit(CF_SHUTDOWN, &con->flags),
DLM_SHUTDOWN_WAIT_TIMEOUT);
if (ret == 0) {
log_print("Connection %p shutdown timed out, will force close",
con);
goto force_close;
}
}
return;
force_close:
clear_bit(CF_SHUTDOWN, &con->flags);
close_connection(con, false, true, true);
}
static void dlm_tcp_shutdown(struct connection *con)
{
if (con->othercon)
shutdown_connection(con->othercon);
shutdown_connection(con);
}
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
static int con_realloc_receive_buf(struct connection *con, int newlen)
{
unsigned char *newbuf;
newbuf = kmalloc(newlen, GFP_NOFS);
if (!newbuf)
return -ENOMEM;
/* copy any leftover from last receive */
if (con->rx_leftover)
memmove(newbuf, con->rx_buf, con->rx_leftover);
/* swap to new buffer space */
kfree(con->rx_buf);
con->rx_buflen = newlen;
con->rx_buf = newbuf;
return 0;
}
/* Data received from remote end */
static int receive_from_sock(struct connection *con)
{
int call_again_soon = 0;
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
struct msghdr msg;
struct kvec iov;
int ret, buflen;
mutex_lock(&con->sock_mutex);
if (con->sock == NULL) {
ret = -EAGAIN;
goto out_close;
}
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
/* realloc if we get new buffer size to read out */
buflen = dlm_config.ci_buffer_size;
if (con->rx_buflen != buflen && con->rx_leftover <= buflen) {
ret = con_realloc_receive_buf(con, buflen);
if (ret < 0)
goto out_resched;
}
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
/* calculate new buffer parameter regarding last receive and
* possible leftover bytes
*/
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
iov.iov_base = con->rx_buf + con->rx_leftover;
iov.iov_len = con->rx_buflen - con->rx_leftover;
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
memset(&msg, 0, sizeof(msg));
msg.msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL;
ret = kernel_recvmsg(con->sock, &msg, &iov, 1, iov.iov_len,
msg.msg_flags);
if (ret <= 0)
goto out_close;
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
else if (ret == iov.iov_len)
call_again_soon = 1;
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
/* new buflen according readed bytes and leftover from last receive */
buflen = ret + con->rx_leftover;
ret = dlm_process_incoming_buffer(con->nodeid, con->rx_buf, buflen);
if (ret < 0)
goto out_close;
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
/* calculate leftover bytes from process and put it into begin of
* the receive buffer, so next receive we have the full message
* at the start address of the receive buffer.
*/
con->rx_leftover = buflen - ret;
if (con->rx_leftover) {
memmove(con->rx_buf, con->rx_buf + ret,
con->rx_leftover);
call_again_soon = true;
}
if (call_again_soon)
goto out_resched;
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
mutex_unlock(&con->sock_mutex);
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
return 0;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
out_resched:
if (!test_and_set_bit(CF_READ_PENDING, &con->flags))
queue_work(recv_workqueue, &con->rwork);
mutex_unlock(&con->sock_mutex);
return -EAGAIN;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
out_close:
mutex_unlock(&con->sock_mutex);
if (ret != -EAGAIN) {
/* Reconnect when there is something to send */
close_connection(con, false, true, false);
if (ret == 0) {
log_print("connection %p got EOF from %d",
con, con->nodeid);
/* handling for tcp shutdown */
clear_bit(CF_SHUTDOWN, &con->flags);
wake_up(&con->shutdown_wait);
/* signal to breaking receive worker */
ret = -1;
}
}
return ret;
}
/* Listening socket is busy, accept a connection */
static int accept_from_sock(struct listen_connection *con)
{
int result;
struct sockaddr_storage peeraddr;
struct socket *newsock;
int len;
int nodeid;
struct connection *newcon;
struct connection *addcon;
unsigned int mark;
if (!dlm_allow_conn) {
return -1;
}
if (!con->sock)
return -ENOTCONN;
result = kernel_accept(con->sock, &newsock, O_NONBLOCK);
if (result < 0)
goto accept_err;
/* Get the connected socket's peer */
memset(&peeraddr, 0, sizeof(peeraddr));
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13 03:00:20 +08:00
len = newsock->ops->getname(newsock, (struct sockaddr *)&peeraddr, 2);
if (len < 0) {
result = -ECONNABORTED;
goto accept_err;
}
/* Get the new node's NODEID */
make_sockaddr(&peeraddr, 0, &len);
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
if (addr_to_nodeid(&peeraddr, &nodeid, &mark)) {
unsigned char *b=(unsigned char *)&peeraddr;
log_print("connect from non cluster node");
print_hex_dump_bytes("ss: ", DUMP_PREFIX_NONE,
b, sizeof(struct sockaddr_storage));
sock_release(newsock);
return -1;
}
log_print("got connection from %d", nodeid);
/* Check to see if we already have a connection to this node. This
* could happen if the two nodes initiate a connection at roughly
* the same time and the connections cross on the wire.
* In this case we store the incoming one in "othercon"
*/
newcon = nodeid2con(nodeid, GFP_NOFS);
if (!newcon) {
result = -ENOMEM;
goto accept_err;
}
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
sock_set_mark(newsock->sk, mark);
mutex_lock(&newcon->sock_mutex);
if (newcon->sock) {
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
struct connection *othercon = newcon->othercon;
if (!othercon) {
othercon = kzalloc(sizeof(*othercon), GFP_NOFS);
if (!othercon) {
log_print("failed to allocate incoming socket");
mutex_unlock(&newcon->sock_mutex);
result = -ENOMEM;
goto accept_err;
}
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
result = dlm_con_init(othercon, nodeid);
if (result < 0) {
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
kfree(othercon);
mutex_unlock(&newcon->sock_mutex);
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
goto accept_err;
}
lockdep_set_subclass(&othercon->sock_mutex, 1);
newcon->othercon = othercon;
} else {
/* close other sock con if we have something new */
close_connection(othercon, false, true, false);
}
mutex_lock(&othercon->sock_mutex);
add_sock(newsock, othercon);
addcon = othercon;
mutex_unlock(&othercon->sock_mutex);
}
else {
/* accept copies the sk after we've saved the callbacks, so we
don't want to save them a second time or comm errors will
result in calling sk_error_report recursively. */
add_sock(newsock, newcon);
addcon = newcon;
}
set_bit(CF_CONNECTED, &addcon->flags);
mutex_unlock(&newcon->sock_mutex);
/*
* Add it to the active queue in case we got data
* between processing the accept adding the socket
* to the read_sockets list
*/
if (!test_and_set_bit(CF_READ_PENDING, &addcon->flags))
queue_work(recv_workqueue, &addcon->rwork);
return 0;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
accept_err:
if (newsock)
sock_release(newsock);
if (result != -EAGAIN)
log_print("error accepting connection from node: %d", result);
return result;
}
static void free_entry(struct writequeue_entry *e)
{
__free_page(e->page);
kfree(e);
}
/*
* writequeue_entry_complete - try to delete and free write queue entry
* @e: write queue entry to try to delete
* @completed: bytes completed
*
* writequeue_lock must be held.
*/
static void writequeue_entry_complete(struct writequeue_entry *e, int completed)
{
e->offset += completed;
e->len -= completed;
if (e->len == 0 && e->users == 0) {
list_del(&e->list);
free_entry(e);
}
}
/*
* sctp_bind_addrs - bind a SCTP socket to all our addresses
*/
static int sctp_bind_addrs(struct socket *sock, uint16_t port)
{
struct sockaddr_storage localaddr;
struct sockaddr *addr = (struct sockaddr *)&localaddr;
int i, addr_len, result = 0;
for (i = 0; i < dlm_local_count; i++) {
memcpy(&localaddr, dlm_local_addr[i], sizeof(localaddr));
make_sockaddr(&localaddr, port, &addr_len);
if (!i)
result = kernel_bind(sock, addr, addr_len);
else
result = sock_bind_add(sock->sk, addr, addr_len);
if (result < 0) {
log_print("Can't bind to %d addr number %d, %d.\n",
port, i + 1, result);
break;
}
}
return result;
}
/* Initiate an SCTP association.
This is a special case of send_to_sock() in that we don't yet have a
peeled-off socket for this association, so we use the listening socket
and add the primary IP address of the remote node.
*/
static void sctp_connect_to_sock(struct connection *con)
{
struct sockaddr_storage daddr;
int result;
int addr_len;
struct socket *sock;
unsigned int mark;
mutex_lock(&con->sock_mutex);
/* Some odd races can cause double-connects, ignore them */
if (con->retries++ > MAX_CONNECT_RETRIES)
goto out;
if (con->sock) {
log_print("node %d already connected.", con->nodeid);
goto out;
}
memset(&daddr, 0, sizeof(daddr));
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
result = nodeid_to_addr(con->nodeid, &daddr, NULL, true, &mark);
if (result < 0) {
log_print("no address for nodeid %d", con->nodeid);
goto out;
}
/* Create a socket to communicate with */
result = sock_create_kern(&init_net, dlm_local_addr[0]->ss_family,
SOCK_STREAM, IPPROTO_SCTP, &sock);
if (result < 0)
goto socket_err;
sock_set_mark(sock->sk, mark);
add_sock(sock, con);
/* Bind to all addresses. */
if (sctp_bind_addrs(con->sock, 0))
goto bind_err;
make_sockaddr(&daddr, dlm_config.ci_tcp_port, &addr_len);
log_print("connecting to %d", con->nodeid);
/* Turn off Nagle's algorithm */
sctp_sock_set_nodelay(sock->sk);
/*
* Make sock->ops->connect() function return in specified time,
* since O_NONBLOCK argument in connect() function does not work here,
* then, we should restore the default value of this attribute.
*/
sock_set_sndtimeo(sock->sk, 5);
result = sock->ops->connect(sock, (struct sockaddr *)&daddr, addr_len,
dlm: remove O_NONBLOCK flag in sctp_connect_to_sock We should remove O_NONBLOCK flag when calling sock->ops->connect() in sctp_connect_to_sock() function. Why? 1. up to now, sctp socket connect() function ignores the flag argument, that means O_NONBLOCK flag does not take effect, then we should remove it to avoid the confusion (but is not urgent). 2. for the future, there will be a patch to fix this problem, then the flag argument will take effect, the patch has been queued at https://git.kernel.o rg/pub/scm/linux/kernel/git/davem/net.git/commit/net/sctp?id=644fbdeacf1d3ed d366e44b8ba214de9d1dd66a9. But, the O_NONBLOCK flag will make sock->ops->connect() directly return without any wait time, then the connection will not be established, DLM kernel module will call sock->ops->connect() again and again, the bad results are, CPU usage is almost 100%, even trigger soft_lockup problem if the related configurations are enabled, DLM kernel module also prints lots of messages like, [Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592 [Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592 [Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592 [Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592 The upper application (e.g. ocfs2 mount command) is hanged at new_lockspace(), the whole backtrace is as below, tb0307-nd2:~ # cat /proc/2935/stack [<0>] new_lockspace+0x957/0xac0 [dlm] [<0>] dlm_new_lockspace+0xae/0x140 [dlm] [<0>] user_cluster_connect+0xc3/0x3a0 [ocfs2_stack_user] [<0>] ocfs2_cluster_connect+0x144/0x220 [ocfs2_stackglue] [<0>] ocfs2_dlm_init+0x215/0x440 [ocfs2] [<0>] ocfs2_fill_super+0xcb0/0x1290 [ocfs2] [<0>] mount_bdev+0x173/0x1b0 [<0>] mount_fs+0x35/0x150 [<0>] vfs_kern_mount.part.23+0x54/0x100 [<0>] do_mount+0x59a/0xc40 [<0>] SyS_mount+0x80/0xd0 [<0>] do_syscall_64+0x76/0x140 [<0>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [<0>] 0xffffffffffffffff So, I think we should remove O_NONBLOCK flag here, since DLM kernel module can not handle non-block sockect in connect() properly. Signed-off-by: Gang He <ghe@suse.com> Signed-off-by: David Teigland <teigland@redhat.com>
2018-05-29 11:09:22 +08:00
0);
sock_set_sndtimeo(sock->sk, 0);
if (result == -EINPROGRESS)
result = 0;
if (result == 0) {
if (!test_and_set_bit(CF_CONNECTED, &con->flags))
log_print("successful connected to node %d", con->nodeid);
goto out;
}
bind_err:
con->sock = NULL;
sock_release(sock);
socket_err:
/*
* Some errors are fatal and this list might need adjusting. For other
* errors we try again until the max number of retries is reached.
*/
if (result != -EHOSTUNREACH &&
result != -ENETUNREACH &&
result != -ENETDOWN &&
result != -EINVAL &&
result != -EPROTONOSUPPORT) {
log_print("connect %d try %d error %d", con->nodeid,
con->retries, result);
mutex_unlock(&con->sock_mutex);
msleep(1000);
lowcomms_connect_sock(con);
return;
}
out:
mutex_unlock(&con->sock_mutex);
}
/* Connect a new socket to its peer */
static void tcp_connect_to_sock(struct connection *con)
{
struct sockaddr_storage saddr, src_addr;
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
unsigned int mark;
int addr_len;
struct socket *sock = NULL;
int result;
mutex_lock(&con->sock_mutex);
if (con->retries++ > MAX_CONNECT_RETRIES)
goto out;
/* Some odd races can cause double-connects, ignore them */
if (con->sock)
goto out;
/* Create a socket to communicate with */
result = sock_create_kern(&init_net, dlm_local_addr[0]->ss_family,
SOCK_STREAM, IPPROTO_TCP, &sock);
if (result < 0)
goto out_err;
memset(&saddr, 0, sizeof(saddr));
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
result = nodeid_to_addr(con->nodeid, &saddr, NULL, false, &mark);
if (result < 0) {
log_print("no address for nodeid %d", con->nodeid);
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
goto out_err;
}
fs: dlm: fix mark setting deadlock This patch fixes an deadlock issue when dlm_lowcomms_close() is called. When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is held to remove configfs items. At this time we flushing (e.g. cancel_work_sync()) the workers of send and recv workqueue. Due the fact that we accessing configfs items (mark values), these workers will lock clusters_root.subsys.su_mutex as well which are already hold by dlm_lowcomms_close() and ends in a deadlock situation. [67170.703046] ====================================================== [67170.703965] WARNING: possible circular locking dependency detected [67170.704758] 5.11.0-rc4+ #22 Tainted: G W [67170.705433] ------------------------------------------------------ [67170.706228] dlm_controld/280 is trying to acquire lock: [67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0 [67170.708026] but task is already holding lock: [67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310 [67170.710016] which lock already depends on the new lock. The new behaviour adds the mark value to the node address configuration which doesn't require to held the clusters_root.subsys.su_mutex by accessing mark values in a separate datastructure. However the mark values can be set now only after a node address was set which is the case when the user is using dlm_controld. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:09 +08:00
sock_set_mark(sock->sk, mark);
add_sock(sock, con);
/* Bind to our cluster-known address connecting to avoid
routing problems */
memcpy(&src_addr, dlm_local_addr[0], sizeof(src_addr));
make_sockaddr(&src_addr, 0, &addr_len);
result = sock->ops->bind(sock, (struct sockaddr *) &src_addr,
addr_len);
if (result < 0) {
log_print("could not bind for connect: %d", result);
/* This *may* not indicate a critical error */
}
make_sockaddr(&saddr, dlm_config.ci_tcp_port, &addr_len);
log_print("connecting to %d", con->nodeid);
/* Turn off Nagle's algorithm */
tcp_sock_set_nodelay(sock->sk);
result = sock->ops->connect(sock, (struct sockaddr *)&saddr, addr_len,
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
O_NONBLOCK);
if (result == -EINPROGRESS)
result = 0;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
if (result == 0)
goto out;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
out_err:
if (con->sock) {
sock_release(con->sock);
con->sock = NULL;
} else if (sock) {
sock_release(sock);
}
/*
* Some errors are fatal and this list might need adjusting. For other
* errors we try again until the max number of retries is reached.
*/
if (result != -EHOSTUNREACH &&
result != -ENETUNREACH &&
result != -ENETDOWN &&
result != -EINVAL &&
result != -EPROTONOSUPPORT) {
log_print("connect %d try %d error %d", con->nodeid,
con->retries, result);
mutex_unlock(&con->sock_mutex);
msleep(1000);
lowcomms_connect_sock(con);
return;
}
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
out:
mutex_unlock(&con->sock_mutex);
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
return;
}
/* On error caller must run dlm_close_sock() for the
* listen connection socket.
*/
static int tcp_create_listen_sock(struct listen_connection *con,
struct sockaddr_storage *saddr)
{
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
struct socket *sock = NULL;
int result = 0;
int addr_len;
if (dlm_local_addr[0]->ss_family == AF_INET)
addr_len = sizeof(struct sockaddr_in);
else
addr_len = sizeof(struct sockaddr_in6);
/* Create a socket to communicate with */
result = sock_create_kern(&init_net, dlm_local_addr[0]->ss_family,
SOCK_STREAM, IPPROTO_TCP, &sock);
if (result < 0) {
log_print("Can't create listening comms socket");
goto create_out;
}
sock_set_mark(sock->sk, dlm_config.ci_mark);
/* Turn off Nagle's algorithm */
tcp_sock_set_nodelay(sock->sk);
sock_set_reuseaddr(sock->sk);
add_listen_sock(sock, con);
/* Bind to our port */
make_sockaddr(saddr, dlm_config.ci_tcp_port, &addr_len);
result = sock->ops->bind(sock, (struct sockaddr *) saddr, addr_len);
if (result < 0) {
log_print("Can't bind to port %d", dlm_config.ci_tcp_port);
goto create_out;
}
sock_set_keepalive(sock->sk);
result = sock->ops->listen(sock, 5);
if (result < 0) {
log_print("Can't listen on port %d", dlm_config.ci_tcp_port);
goto create_out;
}
return 0;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
create_out:
return result;
}
/* Get local addresses */
static void init_local(void)
{
struct sockaddr_storage sas, *addr;
int i;
dlm_local_count = 0;
for (i = 0; i < DLM_MAX_ADDR_COUNT; i++) {
if (dlm_our_addr(&sas, i))
break;
addr = kmemdup(&sas, sizeof(*addr), GFP_NOFS);
if (!addr)
break;
dlm_local_addr[dlm_local_count++] = addr;
}
}
static void deinit_local(void)
{
int i;
for (i = 0; i < dlm_local_count; i++)
kfree(dlm_local_addr[i]);
}
/* Initialise SCTP socket and bind to all interfaces
* On error caller must run dlm_close_sock() for the
* listen connection socket.
*/
static int sctp_listen_for_all(struct listen_connection *con)
{
struct socket *sock = NULL;
int result = -EINVAL;
log_print("Using SCTP for communications");
result = sock_create_kern(&init_net, dlm_local_addr[0]->ss_family,
SOCK_STREAM, IPPROTO_SCTP, &sock);
if (result < 0) {
log_print("Can't create comms socket, check SCTP is loaded");
goto out;
}
sock_set_rcvbuf(sock->sk, NEEDED_RMEM);
sock_set_mark(sock->sk, dlm_config.ci_mark);
sctp_sock_set_nodelay(sock->sk);
add_listen_sock(sock, con);
/* Bind to all addresses. */
result = sctp_bind_addrs(con->sock, dlm_config.ci_tcp_port);
if (result < 0)
goto out;
result = sock->ops->listen(sock, 5);
if (result < 0) {
log_print("Can't set socket listening");
goto out;
}
return 0;
out:
return result;
}
static int tcp_listen_for_all(void)
{
/* We don't support multi-homed hosts */
if (dlm_local_count > 1) {
log_print("TCP protocol can't handle multi-homed hosts, "
"try SCTP");
return -EINVAL;
}
log_print("Using TCP for communications");
return tcp_create_listen_sock(&listen_con, dlm_local_addr[0]);
}
static struct writequeue_entry *new_writequeue_entry(struct connection *con,
gfp_t allocation)
{
struct writequeue_entry *entry;
entry = kzalloc(sizeof(*entry), allocation);
if (!entry)
return NULL;
entry->page = alloc_page(allocation | __GFP_ZERO);
if (!entry->page) {
kfree(entry);
return NULL;
}
entry->con = con;
entry->users = 1;
return entry;
}
static struct writequeue_entry *new_wq_entry(struct connection *con, int len,
gfp_t allocation, char **ppc)
{
struct writequeue_entry *e;
spin_lock(&con->writequeue_lock);
if (!list_empty(&con->writequeue)) {
e = list_last_entry(&con->writequeue, struct writequeue_entry, list);
if (DLM_WQ_REMAIN_BYTES(e) >= len) {
*ppc = page_address(e->page) + e->end;
e->end += len;
e->users++;
spin_unlock(&con->writequeue_lock);
return e;
}
}
spin_unlock(&con->writequeue_lock);
e = new_writequeue_entry(con, allocation);
if (!e)
return NULL;
*ppc = page_address(e->page);
e->end += len;
spin_lock(&con->writequeue_lock);
list_add_tail(&e->list, &con->writequeue);
spin_unlock(&con->writequeue_lock);
return e;
};
void *dlm_lowcomms_get_buffer(int nodeid, int len, gfp_t allocation, char **ppc)
{
struct connection *con;
if (len > DEFAULT_BUFFER_SIZE ||
len < sizeof(struct dlm_header)) {
BUILD_BUG_ON(PAGE_SIZE < DEFAULT_BUFFER_SIZE);
log_print("failed to allocate a buffer of size %d", len);
WARN_ON(1);
return NULL;
}
con = nodeid2con(nodeid, allocation);
if (!con)
return NULL;
return new_wq_entry(con, len, allocation, ppc);
}
void dlm_lowcomms_commit_buffer(void *mh)
{
struct writequeue_entry *e = (struct writequeue_entry *)mh;
struct connection *con = e->con;
int users;
spin_lock(&con->writequeue_lock);
users = --e->users;
if (users)
goto out;
e->len = DLM_WQ_LENGTH_BYTES(e);
spin_unlock(&con->writequeue_lock);
queue_work(send_workqueue, &con->swork);
return;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
out:
spin_unlock(&con->writequeue_lock);
return;
}
/* Send a message */
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
static void send_to_sock(struct connection *con)
{
int ret = 0;
const int msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL;
struct writequeue_entry *e;
int len, offset;
int count = 0;
mutex_lock(&con->sock_mutex);
if (con->sock == NULL)
goto out_connect;
spin_lock(&con->writequeue_lock);
for (;;) {
if (list_empty(&con->writequeue))
break;
e = list_first_entry(&con->writequeue, struct writequeue_entry, list);
len = e->len;
offset = e->offset;
BUG_ON(len == 0 && e->users == 0);
spin_unlock(&con->writequeue_lock);
ret = 0;
if (len) {
ret = kernel_sendpage(con->sock, e->page, offset, len,
msg_flags);
if (ret == -EAGAIN || ret == 0) {
if (ret == -EAGAIN &&
test_bit(SOCKWQ_ASYNC_NOSPACE, &con->sock->flags) &&
!test_and_set_bit(CF_APP_LIMITED, &con->flags)) {
/* Notify TCP that we're limited by the
* application window size.
*/
set_bit(SOCK_NOSPACE, &con->sock->flags);
con->sock->sk->sk_write_pending++;
}
cond_resched();
goto out;
} else if (ret < 0)
goto send_error;
}
/* Don't starve people filling buffers */
if (++count >= MAX_SEND_MSG_COUNT) {
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
cond_resched();
count = 0;
}
spin_lock(&con->writequeue_lock);
writequeue_entry_complete(e, ret);
}
spin_unlock(&con->writequeue_lock);
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
out:
mutex_unlock(&con->sock_mutex);
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
return;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
send_error:
mutex_unlock(&con->sock_mutex);
close_connection(con, false, false, true);
/* Requeue the send work. When the work daemon runs again, it will try
a new connection, then call this function again. */
queue_work(send_workqueue, &con->swork);
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
return;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
out_connect:
mutex_unlock(&con->sock_mutex);
queue_work(send_workqueue, &con->swork);
cond_resched();
}
static void clean_one_writequeue(struct connection *con)
{
struct writequeue_entry *e, *safe;
spin_lock(&con->writequeue_lock);
list_for_each_entry_safe(e, safe, &con->writequeue, list) {
list_del(&e->list);
free_entry(e);
}
spin_unlock(&con->writequeue_lock);
}
/* Called from recovery when it knows that a node has
left the cluster */
int dlm_lowcomms_close(int nodeid)
{
struct connection *con;
struct dlm_node_addr *na;
log_print("closing connection to node %d", nodeid);
con = nodeid2con(nodeid, 0);
if (con) {
set_bit(CF_CLOSE, &con->flags);
close_connection(con, true, true, true);
clean_one_writequeue(con);
if (con->othercon)
clean_one_writequeue(con->othercon);
}
spin_lock(&dlm_node_addrs_spin);
na = find_node_addr(nodeid);
if (na) {
list_del(&na->list);
while (na->addr_count--)
kfree(na->addr[na->addr_count]);
kfree(na);
}
spin_unlock(&dlm_node_addrs_spin);
return 0;
}
/* Receive workqueue function */
static void process_recv_sockets(struct work_struct *work)
{
struct connection *con = container_of(work, struct connection, rwork);
int err;
clear_bit(CF_READ_PENDING, &con->flags);
do {
err = receive_from_sock(con);
} while (!err);
}
static void process_listen_recv_socket(struct work_struct *work)
{
accept_from_sock(&listen_con);
}
/* Send workqueue function */
static void process_send_sockets(struct work_struct *work)
{
struct connection *con = container_of(work, struct connection, swork);
clear_bit(CF_WRITE_PENDING, &con->flags);
if (con->sock == NULL) /* not mutex protected so check it inside too */
con->connect_action(con);
if (!list_empty(&con->writequeue))
send_to_sock(con);
}
static void work_stop(void)
{
if (recv_workqueue)
destroy_workqueue(recv_workqueue);
if (send_workqueue)
destroy_workqueue(send_workqueue);
}
static int work_start(void)
{
recv_workqueue = alloc_workqueue("dlm_recv",
WQ_UNBOUND | WQ_MEM_RECLAIM, 1);
if (!recv_workqueue) {
log_print("can't start dlm_recv");
return -ENOMEM;
}
send_workqueue = alloc_workqueue("dlm_send",
WQ_UNBOUND | WQ_MEM_RECLAIM, 1);
if (!send_workqueue) {
log_print("can't start dlm_send");
destroy_workqueue(recv_workqueue);
return -ENOMEM;
}
return 0;
}
fs: dlm: add shutdown hook This patch fixes issues which occurs when dlm lowcomms synchronize their workqueues but dlm application layer already released the lockspace. In such cases messages like: dlm: gfs2: release_lockspace final free dlm: invalid lockspace 3841231384 from 1 cmd 1 type 11 are printed on the kernel log. This patch is solving this issue by introducing a new "shutdown" hook before calling "stop" hook when the lockspace is going to be released finally. This should pretend any dlm messages sitting in the workqueues during or after lockspace removal. It's necessary to call dlm_scand_stop() as I instrumented dlm_lowcomms_get_buffer() code to report a warning after it's called after dlm_midcomms_shutdown() functionality, see below: WARNING: CPU: 1 PID: 3794 at fs/dlm/midcomms.c:1003 dlm_midcomms_get_buffer+0x167/0x180 Modules linked in: joydev iTCO_wdt intel_pmc_bxt iTCO_vendor_support drm_ttm_helper ttm pcspkr serio_raw i2c_i801 i2c_smbus drm_kms_helper virtio_scsi lpc_ich virtio_balloon virtio_console xhci_pci xhci_pci_renesas cec qemu_fw_cfg drm [last unloaded: qxl] CPU: 1 PID: 3794 Comm: dlm_scand Tainted: G W 5.11.0+ #26 Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014 RIP: 0010:dlm_midcomms_get_buffer+0x167/0x180 Code: 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 45 31 e4 5b 5d 4c 89 e0 41 5c 41 5d 41 5e 41 5f c3 4c 89 e7 45 31 e4 e8 3b f1 ec ff eb 86 <0f> 0b 4c 89 e7 45 31 e4 e8 2c f1 ec ff e9 74 ff ff ff 0f 1f 80 00 RSP: 0018:ffffa81503f8fe60 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8f969827f200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffad1e89a0 RDI: ffff8f96a5294160 RBP: 0000000000000001 R08: 0000000000000000 R09: ffff8f96a250bc60 R10: 00000000000045d3 R11: 0000000000000000 R12: ffff8f96a250bc60 R13: ffffa81503f8fec8 R14: 0000000000000070 R15: 0000000000000c40 FS: 0000000000000000(0000) GS:ffff8f96fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa3351c000 CR3: 000000010bf22000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dlm_scan_rsbs+0x420/0x670 ? dlm_uevent+0x20/0x20 dlm_scand+0xbf/0xe0 kthread+0x13a/0x150 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 To synchronize all dlm scand messages we stop it right before shutdown hook. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:20 +08:00
static void shutdown_conn(struct connection *con)
{
if (con->shutdown_action)
con->shutdown_action(con);
}
void dlm_lowcomms_shutdown(void)
{
/* Set all the flags to prevent any
* socket activity.
*/
dlm_allow_conn = 0;
if (recv_workqueue)
flush_workqueue(recv_workqueue);
if (send_workqueue)
flush_workqueue(send_workqueue);
dlm_close_sock(&listen_con.sock);
foreach_conn(shutdown_conn);
}
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
static void _stop_conn(struct connection *con, bool and_other)
{
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
mutex_lock(&con->sock_mutex);
set_bit(CF_CLOSE, &con->flags);
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
set_bit(CF_READ_PENDING, &con->flags);
set_bit(CF_WRITE_PENDING, &con->flags);
if (con->sock && con->sock->sk) {
write_lock_bh(&con->sock->sk->sk_callback_lock);
con->sock->sk->sk_user_data = NULL;
write_unlock_bh(&con->sock->sk->sk_callback_lock);
}
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
if (con->othercon && and_other)
_stop_conn(con->othercon, false);
mutex_unlock(&con->sock_mutex);
}
static void stop_conn(struct connection *con)
{
_stop_conn(con, true);
}
fs: dlm: rework receive handling This patch reworks the current receive handling of dlm. As I tried to change the send handling to fix reorder issues I took a look into the receive handling and simplified it, it works as the following: Each connection has a preallocated receive buffer with a minimum length of 4096. On receive, the upper layer protocol will process all dlm message until there is not enough data anymore. If there exists "leftover" data at the end of the receive buffer because the dlm message wasn't fully received it will be copied to the begin of the preallocated receive buffer. Next receive more data will be appended to the previous "leftover" data and processing will begin again. This will remove a lot of code of the current mechanism. Inside the processing functionality we will ensure with a memmove() that the dlm message should be memory aligned. To have a dlm message always started at the beginning of the buffer will reduce some amount of memmove() calls because src and dest pointers are the same. The cluster attribute "buffer_size" becomes a new meaning, it's now the size of application layer receive buffer size. If this is changed during runtime the receive buffer will be reallocated. It's important that the receive buffer size has at minimum the size of the maximum possible dlm message size otherwise the received message cannot be placed inside the receive buffer size. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2020-09-24 22:31:26 +08:00
static void connection_release(struct rcu_head *rcu)
{
struct connection *con = container_of(rcu, struct connection, rcu);
kfree(con->rx_buf);
kfree(con);
}
static void free_conn(struct connection *con)
{
close_connection(con, true, true, true);
spin_lock(&connections_lock);
hlist_del_rcu(&con->list);
spin_unlock(&connections_lock);
if (con->othercon) {
clean_one_writequeue(con->othercon);
call_srcu(&connections_srcu, &con->othercon->rcu,
connection_release);
}
clean_one_writequeue(con);
call_srcu(&connections_srcu, &con->rcu, connection_release);
}
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
static void work_flush(void)
{
int ok, idx;
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
int i;
struct connection *con;
do {
ok = 1;
foreach_conn(stop_conn);
if (recv_workqueue)
flush_workqueue(recv_workqueue);
if (send_workqueue)
flush_workqueue(send_workqueue);
idx = srcu_read_lock(&connections_srcu);
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
for (i = 0; i < CONN_HASH_SIZE && ok; i++) {
hlist_for_each_entry_rcu(con, &connection_hash[i],
list) {
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
ok &= test_bit(CF_READ_PENDING, &con->flags);
ok &= test_bit(CF_WRITE_PENDING, &con->flags);
if (con->othercon) {
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
ok &= test_bit(CF_READ_PENDING,
&con->othercon->flags);
ok &= test_bit(CF_WRITE_PENDING,
&con->othercon->flags);
}
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
}
}
srcu_read_unlock(&connections_srcu, idx);
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
} while (!ok);
}
void dlm_lowcomms_stop(void)
{
DLM: fix double list_del() dlm_lowcomms_stop() was not functioning properly. Correctly, we have to wait until all processing is finished with send_workqueue and recv_workqueue. This problem causes the following issue. Senario is 1. dlm_send thread: send_to_sock refers con->writequeue 2. main thread: dlm_lowcomms_stop calls list_del 3. dlm_send thread: send_to_sock calls list_del in writequeue_entry_complete [ 1925.770305] dlm: canceled swork for node 4 [ 1925.772374] general protection fault: 0000 [#1] SMP [ 1925.777930] Modules linked in: ocfs2_stack_user ocfs2 ocfs2_nodemanager ocfs2_stackglue dlm fmxnet(O) fmx_api(O) fmx_cu(O) igb(O) kvm_intel kvm irqbypass autofs4 [ 1925.794131] CPU: 3 PID: 6994 Comm: kworker/u8:0 Tainted: G O 4.4.39 #1 [ 1925.802684] Hardware name: TOSHIBA OX/OX, BIOS OX-P0015 12/03/2015 [ 1925.809595] Workqueue: dlm_send process_send_sockets [dlm] [ 1925.815714] task: ffff8804398d3c00 ti: ffff88046910c000 task.ti: ffff88046910c000 [ 1925.824072] RIP: 0010:[<ffffffffa04bd158>] [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1925.834480] RSP: 0018:ffff88046910fde0 EFLAGS: 00010246 [ 1925.840411] RAX: dead000000000200 RBX: 0000000000000001 RCX: 000000000000000a [ 1925.848372] RDX: ffff88046bd980c0 RSI: 0000000000000000 RDI: ffff8804673c5670 [ 1925.856341] RBP: ffff88046910fe20 R08: 00000000000000c9 R09: 0000000000000010 [ 1925.864311] R10: ffffffff81e22fc0 R11: 0000000000000000 R12: ffff8804673c56d8 [ 1925.872281] R13: ffff8804673c5660 R14: ffff88046bd98440 R15: 0000000000000058 [ 1925.880251] FS: 0000000000000000(0000) GS:ffff88047fd80000(0000) knlGS:0000000000000000 [ 1925.889280] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1925.895694] CR2: 00007fff09eadf58 CR3: 00000004690f5000 CR4: 00000000001006e0 [ 1925.903663] Stack: [ 1925.905903] ffff8804673c5630 ffff8804673c5620 ffff8804673c5670 ffff88007d219b40 [ 1925.914181] ffff88046f095800 0000000000000100 ffff8800717a1400 ffff8804673c56d8 [ 1925.922459] ffff88046910fe60 ffffffff81073db2 00ff880400000000 ffff88007d219b40 [ 1925.930736] Call Trace: [ 1925.933468] [<ffffffff81073db2>] process_one_work+0x162/0x450 [ 1925.939983] [<ffffffff81074459>] worker_thread+0x69/0x4a0 [ 1925.946109] [<ffffffff810743f0>] ? rescuer_thread+0x350/0x350 [ 1925.952622] [<ffffffff8107956f>] kthread+0xef/0x110 [ 1925.958165] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.964283] [<ffffffff8186ab2f>] ret_from_fork+0x3f/0x70 [ 1925.970312] [<ffffffff81079480>] ? kthread_park+0x60/0x60 [ 1925.976436] Code: 01 00 00 48 8b 7d d0 e8 07 d3 3a e1 45 01 7e 18 45 29 7e 1c 75 ab 41 8b 46 24 85 c0 75 a3 49 8b 16 49 8b 46 08 31 f6 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 49 8b 7e 10 49 89 06 66 [ 1925.997791] RIP [<ffffffffa04bd158>] process_send_sockets+0xf8/0x280 [dlm] [ 1926.005577] RSP <ffff88046910fde0> Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2017-09-12 16:55:40 +08:00
work_flush();
foreach_conn(free_conn);
work_stop();
deinit_local();
}
int dlm_lowcomms_start(void)
{
int error = -EINVAL;
int i;
for (i = 0; i < CONN_HASH_SIZE; i++)
INIT_HLIST_HEAD(&connection_hash[i]);
init_local();
if (!dlm_local_count) {
error = -ENOTCONN;
log_print("no local IP address has been set");
goto fail;
}
INIT_WORK(&listen_con.rwork, process_listen_recv_socket);
error = work_start();
if (error)
goto fail;
dlm_allow_conn = 1;
/* Start listening */
if (dlm_config.ci_protocol == 0)
error = tcp_listen_for_all();
else
error = sctp_listen_for_all(&listen_con);
if (error)
goto fail_unlisten;
return 0;
[DLM] Clean up lowcomms This fixes up most of the things pointed out by akpm and Pavel Machek with comments below indicating why some things have been left: Andrew Morton wrote: > >> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc) >> +{ >> + struct nodeinfo *ni; >> + int r; >> + int n; >> + >> + down_read(&nodeinfo_lock); > > Given that this function can sleep, I wonder if `alloc' is useful. > > I see lots of callers passing in a literal "0" for `alloc'. That's in fact > a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really > meant. Particularly as the code could at least have used __GFP_WAIT (aka > GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the > least reliable mode possible. > > IOW, this is all bollixed up. When 0 is passed into nodeid2nodeinfo the function does not try to allocate a new structure at all. it's an indication that the caller only wants the nodeinfo struct for that nodeid if there actually is one in existance. I've tidied the function itself so it's more obvious, (and tidier!) >> +/* Data received from remote end */ >> +static int receive_from_sock(void) >> +{ >> + int ret = 0; >> + struct msghdr msg; >> + struct kvec iov[2]; >> + unsigned len; >> + int r; >> + struct sctp_sndrcvinfo *sinfo; >> + struct cmsghdr *cmsg; >> + struct nodeinfo *ni; >> + >> + /* These two are marginally too big for stack allocation, but this >> + * function is (currently) only called by dlm_recvd so static should be >> + * OK. >> + */ >> + static struct sockaddr_storage msgname; >> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > whoa. This is globally singly-threaded code?? Yes. it is only ever run in the context of dlm_recvd. >> >> +static void initiate_association(int nodeid) >> +{ >> + struct sockaddr_storage rem_addr; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Another static buffer to worry about. Globally singly-threaded code? Yes. Only ever called by dlm_sendd. >> + >> +/* Send a message */ >> +static int send_to_sock(struct nodeinfo *ni) >> +{ >> + int ret = 0; >> + struct writequeue_entry *e; >> + int len, offset; >> + struct msghdr outmsg; >> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))]; > > Singly-threaded? Yep. >> >> +static void dealloc_nodeinfo(void) >> +{ >> + int i; >> + >> + for (i=1; i<=max_nodeid; i++) { >> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0); >> + if (ni) { >> + idr_remove(&nodeinfo_idr, i); > > Didn't that need locking? Not. it's only ever called at DLM shutdown after all the other threads have been stopped. >> >> +static int write_list_empty(void) >> +{ >> + int status; >> + >> + spin_lock_bh(&write_nodes_lock); >> + status = list_empty(&write_nodes); >> + spin_unlock_bh(&write_nodes_lock); >> + >> + return status; >> +} > > This function's return value is meaningless. As soon as the lock gets > dropped, the return value can get out of sync with reality. > > Looking at the caller, this _might_ happen to be OK, but it's a nasty and > dangerous thing. Really the locking should be moved into the caller. It's just an optimisation to allow the caller to schedule if there is no work to do. if something arrives immediately afterwards then it will get picked up when the process re-awakes (and it will be woken by that arrival). The 'accepting' atomic has gone completely. as Andrew pointed out it didn't really achieve much anyway. I suspect it was a plaster over some other startup or shutdown bug to be honest. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Pavel Machek <pavel@ucw.cz>
2006-12-06 23:10:37 +08:00
fail_unlisten:
dlm_allow_conn = 0;
dlm_close_sock(&listen_con.sock);
fail:
return error;
}
void dlm_lowcomms_exit(void)
{
struct dlm_node_addr *na, *safe;
spin_lock(&dlm_node_addrs_spin);
list_for_each_entry_safe(na, safe, &dlm_node_addrs, list) {
list_del(&na->list);
while (na->addr_count--)
kfree(na->addr[na->addr_count]);
kfree(na);
}
spin_unlock(&dlm_node_addrs_spin);
}