renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
Code
4268b48077
linux-next/fs/xfs/xfs_icache.h

86 lines
2.8 KiB
C
Raw Normal View History

xfs: convert to SPDX license tags Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 10:42:14 +08:00
// SPDX-License-Identifier: GPL-2.0
[XFS] move xfssyncd code to xfs_sync.c Move all the xfssyncd code to the new xfs_sync.c file. This places it closer to the actual code that it interacts with, rather than just being associated with high level VFS code. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32283a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:18 +08:00
/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* All Rights Reserved.
*/
[XFS] move sync code to its own file The sync code in XFS is spread around several files. While it used to make sense to have such a distribution, the code is about to be cleaned up and so centralising it in one spot as the first step makes sense. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32282a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:08 +08:00
#ifndef XFS_SYNC_H
#define XFS_SYNC_H 1
[XFS] move xfssyncd code to xfs_sync.c Move all the xfssyncd code to the new xfs_sync.c file. This places it closer to the actual code that it interacts with, rather than just being associated with high level VFS code. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32283a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:18 +08:00
struct xfs_mount;
xfs: get rid of indirections in the quotaops implementation Currently we call from the nicely abstracted linux quotaops into a ugly multiplexer just to split the calls out at the same boundary again. Rewrite the quota ops handling to remove that obfucation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-09 15:47:34 +08:00
struct xfs_perag;
[XFS] move xfssyncd code to xfs_sync.c Move all the xfssyncd code to the new xfs_sync.c file. This places it closer to the actual code that it interacts with, rather than just being associated with high level VFS code. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32283a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:18 +08:00
xfs: rename struct xfs_eofblocks to xfs_icwalk The xfs_eofblocks structure is no longer well-named -- nowadays it provides optional filtering criteria to any walk of the incore inode cache. Only one of the cache walk goals has anything to do with clearing of speculative post-EOF preallocations, so change the name to be more appropriate. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-06-08 00:34:51 +08:00
struct xfs_icwalk {
__u32 icw_flags;
kuid_t icw_uid;
kgid_t icw_gid;
prid_t icw_prid;
__u64 icw_min_file_size;
xfs: fix type mismatches in the inode reclaim functions It's currently unlikely that we will ever end up with more than 4 billion inodes waiting for reclamation, but the fs object code uses long int for object counts and we're certainly capable of generating that many. Instead of truncating the internal counters, widen them and report the object counts correctly. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-06-19 02:57:06 +08:00
long icw_scan_limit;
xfs: create internal eofblocks structure with kuid_t types Have eofblocks ioctl convert uid_t to kuid_t into internal structure. Update internal filter matching to compare ids with kuid_t types. Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-16 02:08:02 +08:00
};
xfs: change the prefix of XFS_EOF_FLAGS_* to XFS_ICWALK_FLAG_ In preparation for renaming struct xfs_eofblocks to struct xfs_icwalk, change the prefix of the existing XFS_EOF_FLAGS_* flags to XFS_ICWALK_FLAG_ and convert all the existing users. This adds a degree of interface separation between the ioctl definitions and the incore parameters. Since FLAGS_UNION is only used in xfs_icache.c, move it there as a private flag. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2021-06-08 00:34:51 +08:00
/* Flags that reflect xfs_fs_eofblocks functionality. */
#define XFS_ICWALK_FLAG_SYNC (1U << 0) /* sync/wait mode scan */
#define XFS_ICWALK_FLAG_UID (1U << 1) /* filter by uid */
#define XFS_ICWALK_FLAG_GID (1U << 2) /* filter by gid */
#define XFS_ICWALK_FLAG_PRID (1U << 3) /* filter by project id */
#define XFS_ICWALK_FLAG_MINFILESIZE (1U << 4) /* filter by min file size */
#define XFS_ICWALK_FLAGS_VALID (XFS_ICWALK_FLAG_SYNC | \
XFS_ICWALK_FLAG_UID | \
XFS_ICWALK_FLAG_GID | \
XFS_ICWALK_FLAG_PRID | \
XFS_ICWALK_FLAG_MINFILESIZE)
xfs: move unrelated definitions out of xfs_inode.h Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 18:49:34 +08:00
/*
* Flags for xfs_iget()
*/
#define XFS_IGET_CREATE 0x1
#define XFS_IGET_UNTRUSTED 0x2
#define XFS_IGET_DONTCACHE 0x4
xfs: check if an inode is cached and allocated Check the inode cache for a particular inode number. If it's in the cache, check that it's not currently being reclaimed. If it's not being reclaimed, return zero if the inode is allocated. This function will be used by various scrubbers to decide if the cache is more up to date than the disk in terms of checking if an inode is allocated. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2017-06-19 23:58:56 +08:00
#define XFS_IGET_INCORE 0x8 /* don't read from disk or reinit */
xfs: move unrelated definitions out of xfs_inode.h Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 18:49:34 +08:00
xfs: remove xfs_iget.c The inode cache functions remaining in xfs_iget.c can be moved to xfs_icache.c along with the other inode cache functions. This removes all functionality from xfs_iget.c, so the file can simply be removed. This move results in various functions now only having the scope of a single file (e.g. xfs_inode_free()), so clean up all the definitions and exported prototypes in xfs_icache.[ch] and xfs_inode.h appropriately. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 18:56:11 +08:00
int xfs_iget(struct xfs_mount *mp, struct xfs_trans *tp, xfs_ino_t ino,
uint flags, uint lock_flags, xfs_inode_t **ipp);
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:45 +08:00
/* recovery needs direct inode allocation capability */
struct xfs_inode * xfs_inode_alloc(struct xfs_mount *mp, xfs_ino_t ino);
void xfs_inode_free(struct xfs_inode *ip);
xfs: xfs_syncd_stop must die xfs_syncd_start and xfs_syncd_stop tie a bunch of unrelated functionailty together that actually have different start and stop requirements. Kill these functions and open code the start/stop methods for each of the background functions. Subsequent patches will move the start/stop functions around to the correct places to avoid races and shutdown issues. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 18:55:59 +08:00
void xfs_reclaim_worker(struct work_struct *work);
[XFS] move xfssyncd code to xfs_sync.c Move all the xfssyncd code to the new xfs_sync.c file. This places it closer to the actual code that it interacts with, rather than just being associated with high level VFS code. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32283a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:18 +08:00
xfs: remove SYNC_WAIT from xfs_reclaim_inodes() Clean up xfs_reclaim_inodes() callers. Most callers want blocking behaviour, so just make the existing SYNC_WAIT behaviour the default. For the xfs_reclaim_worker(), just call xfs_reclaim_inodes_ag() directly because we just want optimistic clean inode reclaim to be done in the background. For xfs_quiesce_attr() we can just remove the inode reclaim calls as they are a historic relic that was required to flush dirty inodes that contained unlogged changes. We now log all changes to the inodes, so the sync AIL push from xfs_log_quiesce() called by xfs_quiesce_attr() will do all the required inode writeback for freeze. Seeing as we now want to loop until all reclaimable inodes have been reclaimed, make xfs_reclaim_inodes() loop on the XFS_ICI_RECLAIM_TAG tag rather than having xfs_reclaim_inodes_ag() tell it that inodes were skipped. This is much more reliable and will always loop until all reclaimable inodes are reclaimed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-07-02 01:21:28 +08:00
void xfs_reclaim_inodes(struct xfs_mount *mp);
xfs: fix type mismatches in the inode reclaim functions It's currently unlikely that we will ever end up with more than 4 billion inodes waiting for reclamation, but the fs object code uses long int for object counts and we're certainly capable of generating that many. Instead of truncating the internal counters, widen them and report the object counts correctly. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-06-19 02:57:06 +08:00
long xfs_reclaim_inodes_count(struct xfs_mount *mp);
long xfs_reclaim_inodes_nr(struct xfs_mount *mp, unsigned long nr_to_scan);
[XFS] move inode reclaim functions to xfs_sync.c Background inode reclaim is run by the xfssyncd. Move the reclaim worker functions to be close to the sync code as the are very similar in structure and are both run from the same background thread. SGI-PV: 988142 SGI-Modid: xfs-linux-melb:xfs-kern:32329a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:37:03 +08:00
xfs: refactor per-AG inode tagging functions In preparation for adding another incore inode tree tag, refactor the code that sets and clears tags from the per-AG inode tree and the tree of per-AG structures, and remove the open-coded versions used by the blockgc code. Note: For reclaim, we now rely on the radix tree tags instead of the reclaimable inode count more heavily than we used to. The conversion should be fine, but the logic isn't 100% identical. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-06-01 02:32:02 +08:00
void xfs_inode_mark_reclaimable(struct xfs_inode *ip);
xfs: use generic inode iterator in xfs_qm_dqrele_all_inodes Use xfs_inode_ag_iterator instead of opencoding the inode walk in the quota code. Mark xfs_inode_ag_iterator and xfs_sync_inode_valid non-static to allow using them from the quota code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:35:27 +08:00
xfs: flush eof/cowblocks if we can't reserve quota for inode creation If an inode creation is unable to reserve enough quota to handle the modification, try clearing whatever space the filesystem might have been hanging onto in the hopes of speeding up the filesystem. The flushing behavior will become particularly important when we add deferred inode inactivation because that will increase the amount of space that isn't actively tied to user data. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com>
2021-01-23 08:48:37 +08:00
int xfs_blockgc_free_dquots(struct xfs_mount *mp, struct xfs_dquot *udqp,
struct xfs_dquot *gdqp, struct xfs_dquot *pdqp,
xfs: change the prefix of XFS_EOF_FLAGS_* to XFS_ICWALK_FLAG_ In preparation for renaming struct xfs_eofblocks to struct xfs_icwalk, change the prefix of the existing XFS_EOF_FLAGS_* flags to XFS_ICWALK_FLAG_ and convert all the existing users. This adds a degree of interface separation between the ioctl definitions and the incore parameters. Since FLAGS_UNION is only used in xfs_icache.c, move it there as a private flag. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2021-06-08 00:34:51 +08:00
unsigned int iwalk_flags);
int xfs_blockgc_free_quota(struct xfs_inode *ip, unsigned int iwalk_flags);
xfs: rename struct xfs_eofblocks to xfs_icwalk The xfs_eofblocks structure is no longer well-named -- nowadays it provides optional filtering criteria to any walk of the incore inode cache. Only one of the cache walk goals has anything to do with clearing of speculative post-EOF preallocations, so change the name to be more appropriate. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-06-08 00:34:51 +08:00
int xfs_blockgc_free_space(struct xfs_mount *mp, struct xfs_icwalk *icm);
xfs: use background worker pool when transactions can't get free space In xfs_trans_alloc, if the block reservation call returns ENOSPC, we call xfs_blockgc_free_space with a NULL icwalk structure to try to free space. Each frontend thread that encounters this situation starts its own walk of the inode cache to see if it can find anything, which is wasteful since we don't have any additional selection criteria. For this one common case, create a function that reschedules all pending background work immediately and flushes the workqueue so that the scan can run in parallel. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-07 02:05:42 +08:00
void xfs_blockgc_flush_all(struct xfs_mount *mp);
xfs: trigger all block gc scans when low on quota space The functions to run an eof/cowblocks scan to try to reduce quota usage are kind of a mess -- the logic repeatedly initializes an eofb structure and there are logic bugs in the code that result in the cowblocks scan never actually happening. Replace all three functions with a single function that fills out an eofb and runs both eof and cowblocks scans. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com>
2021-01-23 08:48:34 +08:00
xfs: add EOFBLOCKS inode tagging/untagging Add the XFS_ICI_EOFBLOCKS_TAG inode tag to identify inodes with speculatively preallocated blocks beyond EOF. An inode is tagged when speculative preallocation occurs and untagged either via truncate down or when post-EOF blocks are freed via release or reclaim. The tag management is intentionally not aggressive to prefer simplicity over the complexity of handling all the corner cases under which post-EOF blocks could be freed (i.e., forward truncation, fallocate, write error conditions, etc.). This means that a tagged inode may or may not have post-EOF blocks after a period of time. The tag is eventually cleared when the inode is released or reclaimed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-06 22:50:38 +08:00
void xfs_inode_set_eofblocks_tag(struct xfs_inode *ip);
void xfs_inode_clear_eofblocks_tag(struct xfs_inode *ip);
xfs: garbage collect old cowextsz reservations Trim CoW reservations made on behalf of a cowextsz hint if they get too old or we run low on quota, so long as we don't have dirty data awaiting writeback or directio operations in progress. Garbage collection of the cowextsize extents are kept separate from prealloc extent reaping because setting the CoW prealloc lifetime to a (much) higher value than the regular prealloc extent lifetime has been useful for combatting CoW fragmentation on VM hosts where the VMs experience bursty write behaviors and we can keep the utilization ratios low enough that we don't start to run out of space. IOWs, it benefits us to keep the CoW fork reservations around for as long as we can unless we run out of blocks or hit inode reclaim. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:46 +08:00
void xfs_inode_set_cowblocks_tag(struct xfs_inode *ip);
void xfs_inode_clear_cowblocks_tag(struct xfs_inode *ip);
xfs: consolidate the eofblocks and cowblocks workers Remove the separate cowblocks work items and knob so that we can control and run everything from a single blockgc work queue. Note that the speculative_prealloc_lifetime sysfs knob retains its historical name even though the functions move to prefix xfs_blockgc_*. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-01-23 08:48:43 +08:00
void xfs_blockgc_worker(struct work_struct *work);
xfs: garbage collect old cowextsz reservations Trim CoW reservations made on behalf of a cowextsz hint if they get too old or we run low on quota, so long as we don't have dirty data awaiting writeback or directio operations in progress. Garbage collection of the cowextsize extents are kept separate from prealloc extent reaping because setting the CoW prealloc lifetime to a (much) higher value than the regular prealloc extent lifetime has been useful for combatting CoW fragmentation on VM hosts where the VMs experience bursty write behaviors and we can keep the utilization ratios low enough that we don't start to run out of space. IOWs, it benefits us to keep the CoW fork reservations around for as long as we can unless we run out of blocks or hit inode reclaim. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:46 +08:00
xfs: check if an inode is cached and allocated Check the inode cache for a particular inode number. If it's in the cache, check that it's not currently being reclaimed. If it's not being reclaimed, return zero if the inode is allocated. This function will be used by various scrubbers to decide if the cache is more up to date than the disk in terms of checking if an inode is allocated. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2017-06-19 23:58:56 +08:00
int xfs_icache_inode_is_allocated(struct xfs_mount *mp, struct xfs_trans *tp,
xfs_ino_t ino, bool *inuse);
xfs: rename block gc start and stop functions Shorten the names of the two functions that start and stop block preallocation garbage collection and move them up to the other blockgc functions. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-01-23 08:48:44 +08:00
void xfs_blockgc_stop(struct xfs_mount *mp);
void xfs_blockgc_start(struct xfs_mount *mp);
xfs: halt auto-reclamation activities while rebuilding rmap Rebuilding the reverse-mapping tree requires us to quiesce all inodes in the filesystem, so we must stop background reclamation of post-EOF and CoW prealloc blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2018-05-10 01:03:56 +08:00
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-07 02:05:39 +08:00
void xfs_inodegc_worker(struct work_struct *work);
void xfs_inodegc_flush(struct xfs_mount *mp);
void xfs_inodegc_stop(struct xfs_mount *mp);
void xfs_inodegc_start(struct xfs_mount *mp);
void xfs_inodegc_cpu_dead(struct xfs_mount *mp, unsigned int cpu);
xfs: throttle inode inactivation queuing on memory reclaim Now that we defer inode inactivation, we've decoupled the process of unlinking or closing an inode from the process of inactivating it. In theory this should lead to better throughput since we now inactivate the queued inodes in batches instead of one at a time. Unfortunately, one of the primary risks with this decoupling is the loss of rate control feedback between the frontend and background threads. In other words, a rm -rf /* thread can run the system out of memory if it can queue inodes for inactivation and jump to a new CPU faster than the background threads can actually clear the deferred work. The workers can get scheduled off the CPU if they have to do IO, etc. To solve this problem, we configure a shrinker so that it will activate the /second/ time the shrinkers are called. The custom shrinker will queue all percpu deferred inactivation workers immediately and set a flag to force frontend callers who are releasing a vfs inode to wait for the inactivation workers. On my test VM with 560M of RAM and a 2TB filesystem, this seems to solve most of the OOMing problem when deleting 10 million inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-07 02:05:43 +08:00
int xfs_inodegc_register_shrinker(struct xfs_mount *mp);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-07 02:05:39 +08:00
[XFS] move sync code to its own file The sync code in XFS is spread around several files. While it used to make sense to have such a distribution, the code is about to be cleaned up and so centralising it in one spot as the first step makes sense. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32282a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:08 +08:00
#endif
Copy Permalink