renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Code
3f2290e1b5
linux-next/arch/powerpc/kernel/mce.c

445 lines
13 KiB
C
Raw Normal View History

powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
/*
* Machine check exception handling.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright 2013 IBM Corporation
* Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
*/
#undef DEBUG
#define pr_fmt(fmt) "mce: " fmt
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/percpu.h>
#include <linux/export.h>
Move precessing of MCE queued event out from syscall exit path. Huge Dickins reported an issue that b5ff4211a829 "powerpc/book3s: Queue up and process delayed MCE events" breaks the PowerMac G5 boot. This patch fixes it by moving the mce even processing away from syscall exit, which was wrong to do that in first place, and using irq work framework to delay processing of mce event. Reported-by: Hugh Dickins <hughd@google.com Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-14 18:15:09 +08:00
#include <linux/irq_work.h>
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
#include <asm/mce.h>
static DEFINE_PER_CPU(int, mce_nest_count);
static DEFINE_PER_CPU(struct machine_check_event[MAX_MC_EVT], mce_event);
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
/* Queue for delayed MCE events. */
static DEFINE_PER_CPU(int, mce_queue_count);
static DEFINE_PER_CPU(struct machine_check_event[MAX_MC_EVT], mce_event_queue);
Move precessing of MCE queued event out from syscall exit path. Huge Dickins reported an issue that b5ff4211a829 "powerpc/book3s: Queue up and process delayed MCE events" breaks the PowerMac G5 boot. This patch fixes it by moving the mce even processing away from syscall exit, which was wrong to do that in first place, and using irq work framework to delay processing of mce event. Reported-by: Hugh Dickins <hughd@google.com Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-14 18:15:09 +08:00
static void machine_check_process_queued_event(struct irq_work *work);
powerpc: sparse: static-ify some things As sparse suggests, these should be made static. Signed-off-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-01-06 08:45:50 +08:00
static struct irq_work mce_event_process_work = {
Move precessing of MCE queued event out from syscall exit path. Huge Dickins reported an issue that b5ff4211a829 "powerpc/book3s: Queue up and process delayed MCE events" breaks the PowerMac G5 boot. This patch fixes it by moving the mce even processing away from syscall exit, which was wrong to do that in first place, and using irq work framework to delay processing of mce event. Reported-by: Hugh Dickins <hughd@google.com Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-14 18:15:09 +08:00
.func = machine_check_process_queued_event,
};
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
static void mce_set_error_info(struct machine_check_event *mce,
struct mce_error_info *mce_err)
{
mce->error_type = mce_err->error_type;
switch (mce_err->error_type) {
case MCE_ERROR_TYPE_UE:
mce->u.ue_error.ue_error_type = mce_err->u.ue_error_type;
break;
case MCE_ERROR_TYPE_SLB:
mce->u.slb_error.slb_error_type = mce_err->u.slb_error_type;
break;
case MCE_ERROR_TYPE_ERAT:
mce->u.erat_error.erat_error_type = mce_err->u.erat_error_type;
break;
case MCE_ERROR_TYPE_TLB:
mce->u.tlb_error.tlb_error_type = mce_err->u.tlb_error_type;
break;
powerpc/64s: POWER9 machine check handler Add POWER9 machine check handler. There are several new types of errors added, so logging messages for those are also added. This doesn't attempt to reuse any of the P7/8 defines or functions, because that becomes too complex. The better option in future is to use a table driven approach. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-28 10:00:48 +08:00
case MCE_ERROR_TYPE_USER:
mce->u.user_error.user_error_type = mce_err->u.user_error_type;
break;
case MCE_ERROR_TYPE_RA:
mce->u.ra_error.ra_error_type = mce_err->u.ra_error_type;
break;
case MCE_ERROR_TYPE_LINK:
mce->u.link_error.link_error_type = mce_err->u.link_error_type;
break;
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
case MCE_ERROR_TYPE_UNKNOWN:
default:
break;
}
}
/*
* Decode and save high level MCE information into per cpu buffer which
* is an array of machine_check_event structure.
*/
void save_mce_event(struct pt_regs *regs, long handled,
struct mce_error_info *mce_err,
powerpc/book3s: Recover from MC in sapphire on SCOM read via MMIO. Detect and recover from machine check when inside opal on a special scom load instructions. On specific SCOM read via MMIO we may get a machine check exception with SRR0 pointing inside opal. To recover from MC in this scenario, get a recovery instruction address and return to it from MC. OPAL will export the machine check recoverable ranges through device tree node mcheck-recoverable-ranges under ibm,opal: # hexdump /proc/device-tree/ibm,opal/mcheck-recoverable-ranges 0000000 0000 0000 3000 2804 0000 000c 0000 0000 0000010 3000 2814 0000 0000 3000 27f0 0000 000c 0000020 0000 0000 3000 2814 xxxx xxxx xxxx xxxx 0000030 llll llll yyyy yyyy yyyy yyyy ... ... # where: xxxx xxxx xxxx xxxx = Starting instruction address llll llll = Length of the address range. yyyy yyyy yyyy yyyy = recovery address Each recoverable address range entry is (start address, len, recovery address), 2 cells each for start and recovery address, 1 cell for len, totalling 5 cells per entry. During kernel boot time, build up the recovery table with the list of recovery ranges from device-tree node which will be used during machine check exception to recover from MMIO SCOM UE. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-16 13:16:24 +08:00
uint64_t nip, uint64_t addr)
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
{
powerpc/mce: fix off by one errors in mce event handling Before 69111bac42f5 ("powerpc: Replace __get_cpu_var uses"), in save_mce_event, index got the value of mce_nest_count, and mce_nest_count was incremented *after* index was set. However, that patch changed the behaviour so that mce_nest count was incremented *before* setting index. This causes an off-by-one error, as get_mce_event sets index as mce_nest_count - 1 before reading mce_event. Thus get_mce_event reads bogus data, causing warnings like "Machine Check Exception, Unknown event version 0 !" and breaking MCEs handling. Restore the old behaviour and unbreak MCE handling by subtracting one from the newly incremented value. The same broken change occured in machine_check_queue_event (which set a queue read by machine_check_process_queued_event). Fix that too, unbreaking printing of MCE information. Fixes: 69111bac42f5 ("powerpc: Replace __get_cpu_var uses") CC: stable@vger.kernel.org CC: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> CC: Christoph Lameter <cl@linux.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-12 11:23:59 +08:00
int index = __this_cpu_inc_return(mce_nest_count) - 1;
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
struct machine_check_event *mce = this_cpu_ptr(&mce_event[index]);
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
/*
* Return if we don't have enough space to log mce event.
* mce_nest_count may go beyond MAX_MC_EVT but that's ok,
* the check below will stop buffer overrun.
*/
if (index >= MAX_MC_EVT)
return;
/* Populate generic machine check info */
mce->version = MCE_V1;
powerpc/book3s: Recover from MC in sapphire on SCOM read via MMIO. Detect and recover from machine check when inside opal on a special scom load instructions. On specific SCOM read via MMIO we may get a machine check exception with SRR0 pointing inside opal. To recover from MC in this scenario, get a recovery instruction address and return to it from MC. OPAL will export the machine check recoverable ranges through device tree node mcheck-recoverable-ranges under ibm,opal: # hexdump /proc/device-tree/ibm,opal/mcheck-recoverable-ranges 0000000 0000 0000 3000 2804 0000 000c 0000 0000 0000010 3000 2814 0000 0000 3000 27f0 0000 000c 0000020 0000 0000 3000 2814 xxxx xxxx xxxx xxxx 0000030 llll llll yyyy yyyy yyyy yyyy ... ... # where: xxxx xxxx xxxx xxxx = Starting instruction address llll llll = Length of the address range. yyyy yyyy yyyy yyyy = recovery address Each recoverable address range entry is (start address, len, recovery address), 2 cells each for start and recovery address, 1 cell for len, totalling 5 cells per entry. During kernel boot time, build up the recovery table with the list of recovery ranges from device-tree node which will be used during machine check exception to recover from MMIO SCOM UE. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-16 13:16:24 +08:00
mce->srr0 = nip;
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
mce->srr1 = regs->msr;
mce->gpr3 = regs->gpr[3];
mce->in_use = 1;
powerpc/book3s: Fix MCE console messages for unrecoverable MCE. When machine check occurs with MSR(RI=0), it means MC interrupt is unrecoverable and kernel goes down to panic path. But the console message still shows it as recovered. This patch fixes the MCE console messages. Fixes: 36df96f8acaf ("powerpc/book3s: Decode and save machine check event.") Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09 13:09:13 +08:00
/* Mark it recovered if we have handled it and MSR(RI=1). */
if (handled && (regs->msr & MSR_RI))
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
mce->disposition = MCE_DISPOSITION_RECOVERED;
else
mce->disposition = MCE_DISPOSITION_NOT_RECOVERED;
powerpc/64s: allow machine check handler to set severity and initiator Currently severity and initiator are always set to MCE_SEV_ERROR_SYNC and MCE_INITIATOR_CPU in the core mce code. Allow them to be set by the machine specific mce handlers. No functional change for existing handlers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-28 10:00:47 +08:00
mce->initiator = mce_err->initiator;
mce->severity = mce_err->severity;
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
/*
* Populate the mce error_type and type-specific error_type.
*/
mce_set_error_info(mce, mce_err);
if (!addr)
return;
if (mce->error_type == MCE_ERROR_TYPE_TLB) {
mce->u.tlb_error.effective_address_provided = true;
mce->u.tlb_error.effective_address = addr;
} else if (mce->error_type == MCE_ERROR_TYPE_SLB) {
mce->u.slb_error.effective_address_provided = true;
mce->u.slb_error.effective_address = addr;
} else if (mce->error_type == MCE_ERROR_TYPE_ERAT) {
mce->u.erat_error.effective_address_provided = true;
mce->u.erat_error.effective_address = addr;
powerpc/64s: POWER9 machine check handler Add POWER9 machine check handler. There are several new types of errors added, so logging messages for those are also added. This doesn't attempt to reuse any of the P7/8 defines or functions, because that becomes too complex. The better option in future is to use a table driven approach. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-28 10:00:48 +08:00
} else if (mce->error_type == MCE_ERROR_TYPE_USER) {
mce->u.user_error.effective_address_provided = true;
mce->u.user_error.effective_address = addr;
} else if (mce->error_type == MCE_ERROR_TYPE_RA) {
mce->u.ra_error.effective_address_provided = true;
mce->u.ra_error.effective_address = addr;
} else if (mce->error_type == MCE_ERROR_TYPE_LINK) {
mce->u.link_error.effective_address_provided = true;
mce->u.link_error.effective_address = addr;
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
} else if (mce->error_type == MCE_ERROR_TYPE_UE) {
mce->u.ue_error.effective_address_provided = true;
mce->u.ue_error.effective_address = addr;
}
return;
}
/*
* get_mce_event:
* mce Pointer to machine_check_event structure to be filled.
* release Flag to indicate whether to free the event slot or not.
* 0 <= do not release the mce event. Caller will invoke
* release_mce_event() once event has been consumed.
* 1 <= release the slot.
*
* return 1 = success
* 0 = failure
*
* get_mce_event() will be called by platform specific machine check
* handle routine and in KVM.
* When we call get_mce_event(), we are still in interrupt context and
* preemption will not be scheduled until ret_from_expect() routine
* is called.
*/
int get_mce_event(struct machine_check_event *mce, bool release)
{
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
int index = __this_cpu_read(mce_nest_count) - 1;
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
struct machine_check_event *mc_evt;
int ret = 0;
/* Sanity check */
if (index < 0)
return ret;
/* Check if we have MCE info to process. */
if (index < MAX_MC_EVT) {
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
mc_evt = this_cpu_ptr(&mce_event[index]);
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
/* Copy the event structure and release the original */
if (mce)
*mce = *mc_evt;
if (release)
mc_evt->in_use = 0;
ret = 1;
}
/* Decrement the count to free the slot. */
if (release)
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
__this_cpu_dec(mce_nest_count);
powerpc/book3s: Decode and save machine check event. Now that we handle machine check in linux, the MCE decoding should also take place in linux host. This info is crucial to log before we go down in case we can not handle the machine check errors. This patch decodes and populates a machine check event which contain high level meaning full MCE information. We do this in real mode C code with ME bit on. The MCE information is still available on emergency stack (in pt_regs structure format). Even if we take another exception at this point the MCE early handler will allocate a new stack frame on top of current one. So when we return back here we still have our MCE information safe on current stack. We use per cpu buffer to save high level MCE information. Each per cpu buffer is an array of machine check event structure indexed by per cpu counter mce_nest_count. The mce_nest_count is incremented every time we enter machine check early handler in real mode to get the current free slot (index = mce_nest_count - 1). The mce_nest_count is decremented once the MCE info is consumed by virtual mode machine exception handler. This patch provides save_mce_event(), get_mce_event() and release_mce_event() generic routines that can be used by machine check handlers to populate and retrieve the event. The routine release_mce_event() will free the event slot so that it can be reused. Caller can invoke get_mce_event() with a release flag either to release the event slot immediately OR keep it so that it can be fetched again. The event slot can be also released anytime by invoking release_mce_event(). This patch also updates kvm code to invoke get_mce_event to retrieve generic mce event rather than paca->opal_mce_evt. The KVM code always calls get_mce_event() with release flags set to false so that event is available for linus host machine If machine check occurs while we are in guest, KVM tries to handle the error. If KVM is able to handle MC error successfully, it enters the guest and delivers the machine check to guest. If KVM is not able to handle MC error, it exists the guest and passes the control to linux host machine check handler which then logs MC event and decides how to handle it in linux host. In failure case, KVM needs to make sure that the MC event is available for linux host to consume. Hence KVM always calls get_mce_event() with release flags set to false and later it invokes release_mce_event() only if it succeeds to handle error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:40 +08:00
return ret;
}
void release_mce_event(void)
{
get_mce_event(NULL, true);
}
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
/*
* Queue up the MCE event which then can be handled later.
*/
void machine_check_queue_event(void)
{
int index;
struct machine_check_event evt;
if (!get_mce_event(&evt, MCE_EVENT_RELEASE))
return;
powerpc/mce: fix off by one errors in mce event handling Before 69111bac42f5 ("powerpc: Replace __get_cpu_var uses"), in save_mce_event, index got the value of mce_nest_count, and mce_nest_count was incremented *after* index was set. However, that patch changed the behaviour so that mce_nest count was incremented *before* setting index. This causes an off-by-one error, as get_mce_event sets index as mce_nest_count - 1 before reading mce_event. Thus get_mce_event reads bogus data, causing warnings like "Machine Check Exception, Unknown event version 0 !" and breaking MCEs handling. Restore the old behaviour and unbreak MCE handling by subtracting one from the newly incremented value. The same broken change occured in machine_check_queue_event (which set a queue read by machine_check_process_queued_event). Fix that too, unbreaking printing of MCE information. Fixes: 69111bac42f5 ("powerpc: Replace __get_cpu_var uses") CC: stable@vger.kernel.org CC: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> CC: Christoph Lameter <cl@linux.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-12 11:23:59 +08:00
index = __this_cpu_inc_return(mce_queue_count) - 1;
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
/* If queue is full, just return for now. */
if (index >= MAX_MC_EVT) {
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
__this_cpu_dec(mce_queue_count);
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
return;
}
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
memcpy(this_cpu_ptr(&mce_event_queue[index]), &evt, sizeof(evt));
Move precessing of MCE queued event out from syscall exit path. Huge Dickins reported an issue that b5ff4211a829 "powerpc/book3s: Queue up and process delayed MCE events" breaks the PowerMac G5 boot. This patch fixes it by moving the mce even processing away from syscall exit, which was wrong to do that in first place, and using irq work framework to delay processing of mce event. Reported-by: Hugh Dickins <hughd@google.com Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-14 18:15:09 +08:00
/* Queue irq work to process this event later. */
irq_work_queue(&mce_event_process_work);
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
}
/*
* process pending MCE event from the mce event queue. This function will be
* called during syscall exit.
*/
Move precessing of MCE queued event out from syscall exit path. Huge Dickins reported an issue that b5ff4211a829 "powerpc/book3s: Queue up and process delayed MCE events" breaks the PowerMac G5 boot. This patch fixes it by moving the mce even processing away from syscall exit, which was wrong to do that in first place, and using irq work framework to delay processing of mce event. Reported-by: Hugh Dickins <hughd@google.com Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-14 18:15:09 +08:00
static void machine_check_process_queued_event(struct irq_work *work)
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
{
int index;
/*
* For now just print it to console.
* TODO: log this error event to FSP or nvram.
*/
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
while (__this_cpu_read(mce_queue_count) > 0) {
index = __this_cpu_read(mce_queue_count) - 1;
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
machine_check_print_event_info(
powerpc/book3s: Print task info if we take a machine check in user mode For an MCE (Machine Check Exception) that hits while in user mode MSR(PR=1), print the task info to the console MCE error log. This may help to identify an application that triggered the MCE. After this patch the MCE console looks like: Severe Machine check interrupt [Recovered] NIP: [0000000010039778] PID: 762 Comm: ebizzy Initiator: CPU Error type: SLB [Multihit] Effective address: 0000000010039778 Severe Machine check interrupt [Not recovered] NIP: [0000000010039778] PID: 763 Comm: ebizzy Initiator: CPU Error type: UE [Page table walk ifetch] Effective address: 0000000010039778 ebizzy[763]: unhandled signal 7 at 0000000010039778 nip 0000000010039778 lr 0000000010001b44 code 30004 Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-03 13:29:34 +08:00
this_cpu_ptr(&mce_event_queue[index]), false);
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
__this_cpu_dec(mce_queue_count);
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
}
}
powerpc/book3s: Print task info if we take a machine check in user mode For an MCE (Machine Check Exception) that hits while in user mode MSR(PR=1), print the task info to the console MCE error log. This may help to identify an application that triggered the MCE. After this patch the MCE console looks like: Severe Machine check interrupt [Recovered] NIP: [0000000010039778] PID: 762 Comm: ebizzy Initiator: CPU Error type: SLB [Multihit] Effective address: 0000000010039778 Severe Machine check interrupt [Not recovered] NIP: [0000000010039778] PID: 763 Comm: ebizzy Initiator: CPU Error type: UE [Page table walk ifetch] Effective address: 0000000010039778 ebizzy[763]: unhandled signal 7 at 0000000010039778 nip 0000000010039778 lr 0000000010001b44 code 30004 Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-03 13:29:34 +08:00
void machine_check_print_event_info(struct machine_check_event *evt,
bool user_mode)
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
{
const char *level, *sevstr, *subtype;
static const char *mc_ue_types[] = {
"Indeterminate",
"Instruction fetch",
"Page table walk ifetch",
"Load/Store",
"Page table walk Load/Store",
};
static const char *mc_slb_types[] = {
"Indeterminate",
"Parity",
"Multihit",
};
static const char *mc_erat_types[] = {
"Indeterminate",
"Parity",
"Multihit",
};
static const char *mc_tlb_types[] = {
"Indeterminate",
"Parity",
"Multihit",
};
powerpc/64s: POWER9 machine check handler Add POWER9 machine check handler. There are several new types of errors added, so logging messages for those are also added. This doesn't attempt to reuse any of the P7/8 defines or functions, because that becomes too complex. The better option in future is to use a table driven approach. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-28 10:00:48 +08:00
static const char *mc_user_types[] = {
"Indeterminate",
"tlbie(l) invalid",
};
static const char *mc_ra_types[] = {
"Indeterminate",
"Instruction fetch (bad)",
"Page table walk ifetch (bad)",
"Page table walk ifetch (foreign)",
"Load (bad)",
"Store (bad)",
"Page table walk Load/Store (bad)",
"Page table walk Load/Store (foreign)",
"Load/Store (foreign)",
};
static const char *mc_link_types[] = {
"Indeterminate",
"Instruction fetch (timeout)",
"Page table walk ifetch (timeout)",
"Load (timeout)",
"Store (timeout)",
"Page table walk Load/Store (timeout)",
};
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
/* Print things out */
if (evt->version != MCE_V1) {
pr_err("Machine Check Exception, Unknown event version %d !\n",
evt->version);
return;
}
switch (evt->severity) {
case MCE_SEV_NO_ERROR:
level = KERN_INFO;
sevstr = "Harmless";
break;
case MCE_SEV_WARNING:
level = KERN_WARNING;
sevstr = "";
break;
case MCE_SEV_ERROR_SYNC:
level = KERN_ERR;
sevstr = "Severe";
break;
case MCE_SEV_FATAL:
default:
level = KERN_ERR;
sevstr = "Fatal";
break;
}
printk("%s%s Machine check interrupt [%s]\n", level, sevstr,
evt->disposition == MCE_DISPOSITION_RECOVERED ?
powerpc/64s: Machine check print NIP Print the faulting address of the machine check that may help with debugging. The effective address reported can be a target memory address rather than the faulting instruction address. Fix up a dangling bracket while here. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-14 20:36:43 +08:00
"Recovered" : "Not recovered");
powerpc/book3s: Print task info if we take a machine check in user mode For an MCE (Machine Check Exception) that hits while in user mode MSR(PR=1), print the task info to the console MCE error log. This may help to identify an application that triggered the MCE. After this patch the MCE console looks like: Severe Machine check interrupt [Recovered] NIP: [0000000010039778] PID: 762 Comm: ebizzy Initiator: CPU Error type: SLB [Multihit] Effective address: 0000000010039778 Severe Machine check interrupt [Not recovered] NIP: [0000000010039778] PID: 763 Comm: ebizzy Initiator: CPU Error type: UE [Page table walk ifetch] Effective address: 0000000010039778 ebizzy[763]: unhandled signal 7 at 0000000010039778 nip 0000000010039778 lr 0000000010001b44 code 30004 Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-03 13:29:34 +08:00
if (user_mode) {
printk("%s NIP: [%016llx] PID: %d Comm: %s\n", level,
evt->srr0, current->pid, current->comm);
} else {
printk("%s NIP [%016llx]: %pS\n", level, evt->srr0,
(void *)evt->srr0);
}
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
printk("%s Initiator: %s\n", level,
evt->initiator == MCE_INITIATOR_CPU ? "CPU" : "Unknown");
switch (evt->error_type) {
case MCE_ERROR_TYPE_UE:
subtype = evt->u.ue_error.ue_error_type <
ARRAY_SIZE(mc_ue_types) ?
mc_ue_types[evt->u.ue_error.ue_error_type]
: "Unknown";
printk("%s Error type: UE [%s]\n", level, subtype);
if (evt->u.ue_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt->u.ue_error.effective_address);
if (evt->u.ue_error.physical_address_provided)
treewide: Fix typos in printk This patch fix spelling typos in printk from various part of the codes. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-19 23:27:33 +08:00
printk("%s Physical address: %016llx\n",
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
level, evt->u.ue_error.physical_address);
break;
case MCE_ERROR_TYPE_SLB:
subtype = evt->u.slb_error.slb_error_type <
ARRAY_SIZE(mc_slb_types) ?
mc_slb_types[evt->u.slb_error.slb_error_type]
: "Unknown";
printk("%s Error type: SLB [%s]\n", level, subtype);
if (evt->u.slb_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt->u.slb_error.effective_address);
break;
case MCE_ERROR_TYPE_ERAT:
subtype = evt->u.erat_error.erat_error_type <
ARRAY_SIZE(mc_erat_types) ?
mc_erat_types[evt->u.erat_error.erat_error_type]
: "Unknown";
printk("%s Error type: ERAT [%s]\n", level, subtype);
if (evt->u.erat_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt->u.erat_error.effective_address);
break;
case MCE_ERROR_TYPE_TLB:
subtype = evt->u.tlb_error.tlb_error_type <
ARRAY_SIZE(mc_tlb_types) ?
mc_tlb_types[evt->u.tlb_error.tlb_error_type]
: "Unknown";
printk("%s Error type: TLB [%s]\n", level, subtype);
if (evt->u.tlb_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt->u.tlb_error.effective_address);
break;
powerpc/64s: POWER9 machine check handler Add POWER9 machine check handler. There are several new types of errors added, so logging messages for those are also added. This doesn't attempt to reuse any of the P7/8 defines or functions, because that becomes too complex. The better option in future is to use a table driven approach. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-28 10:00:48 +08:00
case MCE_ERROR_TYPE_USER:
subtype = evt->u.user_error.user_error_type <
ARRAY_SIZE(mc_user_types) ?
mc_user_types[evt->u.user_error.user_error_type]
: "Unknown";
printk("%s Error type: User [%s]\n", level, subtype);
if (evt->u.user_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt->u.user_error.effective_address);
break;
case MCE_ERROR_TYPE_RA:
subtype = evt->u.ra_error.ra_error_type <
ARRAY_SIZE(mc_ra_types) ?
mc_ra_types[evt->u.ra_error.ra_error_type]
: "Unknown";
printk("%s Error type: Real address [%s]\n", level, subtype);
if (evt->u.ra_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt->u.ra_error.effective_address);
break;
case MCE_ERROR_TYPE_LINK:
subtype = evt->u.link_error.link_error_type <
ARRAY_SIZE(mc_link_types) ?
mc_link_types[evt->u.link_error.link_error_type]
: "Unknown";
printk("%s Error type: Link [%s]\n", level, subtype);
if (evt->u.link_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt->u.link_error.effective_address);
break;
powerpc/book3s: Queue up and process delayed MCE events. When machine check real mode handler can not continue into host kernel in V mode, it returns from the interrupt and we loose MCE event which never gets logged. In such a situation queue up the MCE event so that we can log it later when we get back into host kernel with r1 pointing to kernel stack e.g. during syscall exit. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:35:49 +08:00
default:
case MCE_ERROR_TYPE_UNKNOWN:
printk("%s Error type: Unknown\n", level);
break;
}
}
powerpc/powernv: Machine check exception handling. Add basic error handling in machine check exception handler. - If MSR_RI isn't set, we can not recover. - Check if disposition set to OpalMCE_DISPOSITION_RECOVERED. - Check if address at fault is inside kernel address space, if not then send SIGBUS to process if we hit exception when in userspace. - If address at fault is not provided then and if we get a synchronous machine check while in userspace then kill the task. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:36:13 +08:00
uint64_t get_mce_fault_addr(struct machine_check_event *evt)
{
switch (evt->error_type) {
case MCE_ERROR_TYPE_UE:
if (evt->u.ue_error.effective_address_provided)
return evt->u.ue_error.effective_address;
break;
case MCE_ERROR_TYPE_SLB:
if (evt->u.slb_error.effective_address_provided)
return evt->u.slb_error.effective_address;
break;
case MCE_ERROR_TYPE_ERAT:
if (evt->u.erat_error.effective_address_provided)
return evt->u.erat_error.effective_address;
break;
case MCE_ERROR_TYPE_TLB:
if (evt->u.tlb_error.effective_address_provided)
return evt->u.tlb_error.effective_address;
break;
powerpc/64s: POWER9 machine check handler Add POWER9 machine check handler. There are several new types of errors added, so logging messages for those are also added. This doesn't attempt to reuse any of the P7/8 defines or functions, because that becomes too complex. The better option in future is to use a table driven approach. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-28 10:00:48 +08:00
case MCE_ERROR_TYPE_USER:
if (evt->u.user_error.effective_address_provided)
return evt->u.user_error.effective_address;
break;
case MCE_ERROR_TYPE_RA:
if (evt->u.ra_error.effective_address_provided)
return evt->u.ra_error.effective_address;
break;
case MCE_ERROR_TYPE_LINK:
if (evt->u.link_error.effective_address_provided)
return evt->u.link_error.effective_address;
break;
powerpc/powernv: Machine check exception handling. Add basic error handling in machine check exception handler. - If MSR_RI isn't set, we can not recover. - Check if disposition set to OpalMCE_DISPOSITION_RECOVERED. - Check if address at fault is inside kernel address space, if not then send SIGBUS to process if we hit exception when in userspace. - If address at fault is not provided then and if we get a synchronous machine check while in userspace then kill the task. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:36:13 +08:00
default:
case MCE_ERROR_TYPE_UNKNOWN:
break;
}
return 0;
}
EXPORT_SYMBOL(get_mce_fault_addr);
Copy Permalink