renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
Code
3e3a5b8ebd
linux-next/drivers/lightnvm/pblk-recovery.c

1033 lines
25 KiB
C
Raw Normal View History

lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
/*
* Copyright (C) 2016 CNEX Labs
* Initial: Javier Gonzalez <javier@cnexlabs.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* pblk-recovery.c - pblk's recovery path
*/
#include "pblk.h"
void pblk_submit_rec(struct work_struct *work)
{
struct pblk_rec_ctx *recovery =
container_of(work, struct pblk_rec_ctx, ws_rec);
struct pblk *pblk = recovery->pblk;
struct nvm_tgt_dev *dev = pblk->dev;
struct nvm_rq *rqd = recovery->rqd;
struct pblk_c_ctx *c_ctx = nvm_rq_to_pdu(rqd);
int max_secs = nvm_max_phys_sects(dev);
struct bio *bio;
unsigned int nr_rec_secs;
unsigned int pgs_read;
int ret;
nr_rec_secs = bitmap_weight((unsigned long int *)&rqd->ppa_status,
max_secs);
bio = bio_alloc(GFP_KERNEL, nr_rec_secs);
bio->bi_iter.bi_sector = 0;
bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
rqd->bio = bio;
rqd->nr_ppas = nr_rec_secs;
pgs_read = pblk_rb_read_to_bio_list(&pblk->rwb, bio, &recovery->failed,
nr_rec_secs);
if (pgs_read != nr_rec_secs) {
pr_err("pblk: could not read recovery entries\n");
goto err;
}
if (pblk_setup_w_rec_rq(pblk, rqd, c_ctx)) {
pr_err("pblk: could not setup recovery request\n");
goto err;
}
#ifdef CONFIG_NVM_DEBUG
atomic_long_add(nr_rec_secs, &pblk->recov_writes);
#endif
ret = pblk_submit_io(pblk, rqd);
if (ret) {
pr_err("pblk: I/O submission failed: %d\n", ret);
goto err;
}
mempool_free(recovery, pblk->rec_pool);
return;
err:
bio_put(bio);
lightnvm: pblk: improve naming for internal req. Each request type sent to the LightNVM subsystem requires different metadata. Until now, we have tailored this metadata based on write, read and erase commands. However, pblk uses different metadata for internal writes that do not hit the write buffer. Instead of abusing the metadata for reads, create a new request type - internal write to improve code readability. In the process, create internal values for each I/O type instead of abusing the READ/WRITE macros, as suggested by Christoph. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:19 +08:00
pblk_free_rqd(pblk, rqd, PBLK_WRITE);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
}
int pblk_recov_setup_rq(struct pblk *pblk, struct pblk_c_ctx *c_ctx,
struct pblk_rec_ctx *recovery, u64 *comp_bits,
unsigned int comp)
{
struct nvm_tgt_dev *dev = pblk->dev;
int max_secs = nvm_max_phys_sects(dev);
struct nvm_rq *rec_rqd;
struct pblk_c_ctx *rec_ctx;
int nr_entries = c_ctx->nr_valid + c_ctx->nr_padded;
lightnvm: pblk: improve naming for internal req. Each request type sent to the LightNVM subsystem requires different metadata. Until now, we have tailored this metadata based on write, read and erase commands. However, pblk uses different metadata for internal writes that do not hit the write buffer. Instead of abusing the metadata for reads, create a new request type - internal write to improve code readability. In the process, create internal values for each I/O type instead of abusing the READ/WRITE macros, as suggested by Christoph. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:19 +08:00
rec_rqd = pblk_alloc_rqd(pblk, PBLK_WRITE);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
rec_ctx = nvm_rq_to_pdu(rec_rqd);
/* Copy completion bitmap, but exclude the first X completed entries */
bitmap_shift_right((unsigned long int *)&rec_rqd->ppa_status,
(unsigned long int *)comp_bits,
comp, max_secs);
/* Save the context for the entries that need to be re-written and
* update current context with the completed entries.
*/
rec_ctx->sentry = pblk_rb_wrap_pos(&pblk->rwb, c_ctx->sentry + comp);
if (comp >= c_ctx->nr_valid) {
rec_ctx->nr_valid = 0;
rec_ctx->nr_padded = nr_entries - comp;
c_ctx->nr_padded = comp - c_ctx->nr_valid;
} else {
rec_ctx->nr_valid = c_ctx->nr_valid - comp;
rec_ctx->nr_padded = c_ctx->nr_padded;
c_ctx->nr_valid = comp;
c_ctx->nr_padded = 0;
}
recovery->rqd = rec_rqd;
recovery->pblk = pblk;
return 0;
}
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
__le64 *pblk_recov_get_lba_list(struct pblk *pblk, struct line_emeta *emeta_buf)
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
{
u32 crc;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
crc = pblk_calc_emeta_crc(pblk, emeta_buf);
if (le32_to_cpu(emeta_buf->crc) != crc)
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
return NULL;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
if (le32_to_cpu(emeta_buf->header.identifier) != PBLK_MAGIC)
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
return NULL;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
return emeta_to_lbas(pblk, emeta_buf);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
}
static int pblk_recov_l2p_from_emeta(struct pblk *pblk, struct pblk_line *line)
{
struct nvm_tgt_dev *dev = pblk->dev;
struct nvm_geo *geo = &dev->geo;
struct pblk_line_meta *lm = &pblk->lm;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
struct pblk_emeta *emeta = line->emeta;
struct line_emeta *emeta_buf = emeta->buf;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
__le64 *lba_list;
int data_start;
int nr_data_lbas, nr_valid_lbas, nr_lbas = 0;
int i;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
lba_list = pblk_recov_get_lba_list(pblk, emeta_buf);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
if (!lba_list)
return 1;
data_start = pblk_line_smeta_start(pblk, line) + lm->smeta_sec;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
nr_data_lbas = lm->sec_per_line - lm->emeta_sec[0];
nr_valid_lbas = le64_to_cpu(emeta_buf->nr_valid_lbas);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
for (i = data_start; i < nr_data_lbas && nr_lbas < nr_valid_lbas; i++) {
struct ppa_addr ppa;
int pos;
ppa = addr_to_pblk_ppa(pblk, i, line->id);
pos = pblk_ppa_to_pos(geo, ppa);
/* Do not update bad blocks */
if (test_bit(pos, line->blk_bitmap))
continue;
if (le64_to_cpu(lba_list[i]) == ADDR_EMPTY) {
spin_lock(&line->lock);
if (test_and_set_bit(i, line->invalid_bitmap))
lightnvm: fix some WARN() messages WARN_ON() takes a condition, not an error message. I slightly tweaked some conditions so hopefully it's more clear. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:52 +08:00
WARN_ONCE(1, "pblk: rec. double invalidate:\n");
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
else
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
le32_add_cpu(line->vsc, -1);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
spin_unlock(&line->lock);
continue;
}
pblk_update_map(pblk, le64_to_cpu(lba_list[i]), ppa);
nr_lbas++;
}
if (nr_valid_lbas != nr_lbas)
pr_err("pblk: line %d - inconsistent lba list(%llu/%d)\n",
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
line->id, emeta_buf->nr_valid_lbas, nr_lbas);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
line->left_msecs = 0;
return 0;
}
static int pblk_calc_sec_in_line(struct pblk *pblk, struct pblk_line *line)
{
struct nvm_tgt_dev *dev = pblk->dev;
struct nvm_geo *geo = &dev->geo;
struct pblk_line_meta *lm = &pblk->lm;
int nr_bb = bitmap_weight(line->blk_bitmap, lm->blk_per_line);
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
return lm->sec_per_line - lm->smeta_sec - lm->emeta_sec[0] -
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
nr_bb * geo->sec_per_blk;
}
struct pblk_recov_alloc {
struct ppa_addr *ppa_list;
struct pblk_sec_meta *meta_list;
struct nvm_rq *rqd;
void *data;
dma_addr_t dma_ppa_list;
dma_addr_t dma_meta_list;
};
static int pblk_recov_read_oob(struct pblk *pblk, struct pblk_line *line,
struct pblk_recov_alloc p, u64 r_ptr)
{
struct nvm_tgt_dev *dev = pblk->dev;
struct nvm_geo *geo = &dev->geo;
struct ppa_addr *ppa_list;
struct pblk_sec_meta *meta_list;
struct nvm_rq *rqd;
struct bio *bio;
void *data;
dma_addr_t dma_ppa_list, dma_meta_list;
u64 r_ptr_int;
int left_ppas;
int rq_ppas, rq_len;
int i, j;
int ret = 0;
DECLARE_COMPLETION_ONSTACK(wait);
ppa_list = p.ppa_list;
meta_list = p.meta_list;
rqd = p.rqd;
data = p.data;
dma_ppa_list = p.dma_ppa_list;
dma_meta_list = p.dma_meta_list;
left_ppas = line->cur_sec - r_ptr;
if (!left_ppas)
return 0;
r_ptr_int = r_ptr;
next_read_rq:
lightnvm: pblk: rename read request pool Read requests allocate some extra memory to store its per I/O context. Instead of requiring yet another memory pool for other type of requests, generalize this context allocation (and change naming accordingly). Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27 06:27:13 +08:00
memset(rqd, 0, pblk_g_rq_size);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
rq_ppas = pblk_calc_secs(pblk, left_ppas, 0);
if (!rq_ppas)
rq_ppas = pblk->min_write_pgs;
rq_len = rq_ppas * geo->sec_size;
bio = bio_map_kern(dev->q, data, rq_len, GFP_KERNEL);
if (IS_ERR(bio))
return PTR_ERR(bio);
bio->bi_iter.bi_sector = 0; /* internal bio */
bio_set_op_attrs(bio, REQ_OP_READ, 0);
rqd->bio = bio;
rqd->opcode = NVM_OP_PREAD;
rqd->meta_list = meta_list;
rqd->nr_ppas = rq_ppas;
rqd->ppa_list = ppa_list;
rqd->dma_ppa_list = dma_ppa_list;
rqd->dma_meta_list = dma_meta_list;
rqd->end_io = pblk_end_io_sync;
rqd->private = &wait;
lightnvm: pblk: issue multiplane reads if possible If a read request is sequential and its size aligns with a multi-plane page size, use the multi-plane hint to process the I/O in parallel in the controller. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:20 +08:00
if (pblk_io_aligned(pblk, rq_ppas))
rqd->flags = pblk_set_read_mode(pblk, PBLK_READ_SEQUENTIAL);
else
rqd->flags = pblk_set_read_mode(pblk, PBLK_READ_RANDOM);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
for (i = 0; i < rqd->nr_ppas; ) {
struct ppa_addr ppa;
int pos;
ppa = addr_to_gen_ppa(pblk, r_ptr_int, line->id);
pos = pblk_dev_ppa_to_pos(geo, ppa);
while (test_bit(pos, line->blk_bitmap)) {
r_ptr_int += pblk->min_write_pgs;
ppa = addr_to_gen_ppa(pblk, r_ptr_int, line->id);
pos = pblk_dev_ppa_to_pos(geo, ppa);
}
for (j = 0; j < pblk->min_write_pgs; j++, i++, r_ptr_int++)
rqd->ppa_list[i] =
addr_to_gen_ppa(pblk, r_ptr_int, line->id);
}
/* If read fails, more padding is needed */
ret = pblk_submit_io(pblk, rqd);
if (ret) {
pr_err("pblk: I/O submission failed: %d\n", ret);
return ret;
}
if (!wait_for_completion_io_timeout(&wait,
msecs_to_jiffies(PBLK_COMMAND_TIMEOUT_MS))) {
pr_err("pblk: L2P recovery read timed out\n");
return -EINTR;
}
lightnvm: pblk: fail gracefully on irrec. error Due to user writes being decoupled from media writes because of the need of an intermediate write buffer, irrecoverable media write errors lead to pblk stalling; user writes fill up the buffer and end up in an infinite retry loop. In order to let user writes fail gracefully, it is necessary for pblk to keep track of its own internal state and prevent further writes from being placed into the write buffer. This patch implements a state machine to keep track of internal errors and, in case of failure, fail further user writes in an standard way. Depending on the type of error, pblk will do its best to persist buffered writes (which are already acknowledged) and close down on a graceful manner. This way, data might be recovered by re-instantiating pblk. Such state machine paves out the way for a state-based FTL log. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:29 +08:00
atomic_dec(&pblk->inflight_io);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
reinit_completion(&wait);
/* At this point, the read should not fail. If it does, it is a problem
* we cannot recover from here. Need FTL log.
*/
if (rqd->error) {
pr_err("pblk: L2P recovery failed (%d)\n", rqd->error);
return -EINTR;
}
for (i = 0; i < rqd->nr_ppas; i++) {
u64 lba = le64_to_cpu(meta_list[i].lba);
if (lba == ADDR_EMPTY || lba > pblk->rl.nr_secs)
continue;
pblk_update_map(pblk, lba, rqd->ppa_list[i]);
}
left_ppas -= rq_ppas;
if (left_ppas > 0)
goto next_read_rq;
return 0;
}
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
static void pblk_recov_complete(struct kref *ref)
{
struct pblk_pad_rq *pad_rq = container_of(ref, struct pblk_pad_rq, ref);
complete(&pad_rq->wait);
}
static void pblk_end_io_recov(struct nvm_rq *rqd)
{
struct pblk_pad_rq *pad_rq = rqd->private;
struct pblk *pblk = pad_rq->pblk;
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
pblk_up_page(pblk, rqd->ppa_list, rqd->nr_ppas);
lightnvm: pblk: improve naming for internal req. Each request type sent to the LightNVM subsystem requires different metadata. Until now, we have tailored this metadata based on write, read and erase commands. However, pblk uses different metadata for internal writes that do not hit the write buffer. Instead of abusing the metadata for reads, create a new request type - internal write to improve code readability. In the process, create internal values for each I/O type instead of abusing the READ/WRITE macros, as suggested by Christoph. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:19 +08:00
pblk_free_rqd(pblk, rqd, PBLK_WRITE_INT);
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
atomic_dec(&pblk->inflight_io);
kref_put(&pad_rq->ref, pblk_recov_complete);
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
}
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
static int pblk_recov_pad_oob(struct pblk *pblk, struct pblk_line *line,
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
int left_ppas)
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
{
struct nvm_tgt_dev *dev = pblk->dev;
struct nvm_geo *geo = &dev->geo;
struct ppa_addr *ppa_list;
struct pblk_sec_meta *meta_list;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
struct pblk_pad_rq *pad_rq;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
struct nvm_rq *rqd;
struct bio *bio;
void *data;
dma_addr_t dma_ppa_list, dma_meta_list;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
__le64 *lba_list = emeta_to_lbas(pblk, line->emeta->buf);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
u64 w_ptr = line->cur_sec;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
int left_line_ppas, rq_ppas, rq_len;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
int i, j;
int ret = 0;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
spin_lock(&line->lock);
left_line_ppas = line->left_msecs;
spin_unlock(&line->lock);
pad_rq = kmalloc(sizeof(struct pblk_pad_rq), GFP_KERNEL);
if (!pad_rq)
return -ENOMEM;
data = vzalloc(pblk->max_write_pgs * geo->sec_size);
if (!data) {
ret = -ENOMEM;
goto free_rq;
}
pad_rq->pblk = pblk;
init_completion(&pad_rq->wait);
kref_init(&pad_rq->ref);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
next_pad_rq:
rq_ppas = pblk_calc_secs(pblk, left_ppas, 0);
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
if (rq_ppas < pblk->min_write_pgs) {
pr_err("pblk: corrupted pad line %d\n", line->id);
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
goto fail_free_pad;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
}
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
rq_len = rq_ppas * geo->sec_size;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
meta_list = nvm_dev_dma_alloc(dev->parent, GFP_KERNEL, &dma_meta_list);
if (!meta_list) {
ret = -ENOMEM;
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
goto fail_free_pad;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
}
ppa_list = (void *)(meta_list) + pblk_dma_meta_size;
dma_ppa_list = dma_meta_list + pblk_dma_meta_size;
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
bio = pblk_bio_map_addr(pblk, data, rq_ppas, rq_len,
PBLK_VMALLOC_META, GFP_KERNEL);
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
if (IS_ERR(bio)) {
ret = PTR_ERR(bio);
lightnvm: pblk: remove checks on mempool alloc. As part of the mempool audit on pblk, remove unnecessary mempool allocation checks on mempools. Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:10 +08:00
goto fail_free_meta;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
}
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
bio->bi_iter.bi_sector = 0; /* internal bio */
bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
lightnvm: pblk: improve naming for internal req. Each request type sent to the LightNVM subsystem requires different metadata. Until now, we have tailored this metadata based on write, read and erase commands. However, pblk uses different metadata for internal writes that do not hit the write buffer. Instead of abusing the metadata for reads, create a new request type - internal write to improve code readability. In the process, create internal values for each I/O type instead of abusing the READ/WRITE macros, as suggested by Christoph. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:19 +08:00
rqd = pblk_alloc_rqd(pblk, PBLK_WRITE_INT);
lightnvm: pblk: remove checks on mempool alloc. As part of the mempool audit on pblk, remove unnecessary mempool allocation checks on mempools. Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:10 +08:00
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
rqd->bio = bio;
rqd->opcode = NVM_OP_PWRITE;
lightnvm: pblk: improve naming for internal req. Each request type sent to the LightNVM subsystem requires different metadata. Until now, we have tailored this metadata based on write, read and erase commands. However, pblk uses different metadata for internal writes that do not hit the write buffer. Instead of abusing the metadata for reads, create a new request type - internal write to improve code readability. In the process, create internal values for each I/O type instead of abusing the READ/WRITE macros, as suggested by Christoph. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:19 +08:00
rqd->flags = pblk_set_progr_mode(pblk, PBLK_WRITE);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
rqd->meta_list = meta_list;
rqd->nr_ppas = rq_ppas;
rqd->ppa_list = ppa_list;
rqd->dma_ppa_list = dma_ppa_list;
rqd->dma_meta_list = dma_meta_list;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
rqd->end_io = pblk_end_io_recov;
rqd->private = pad_rq;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
for (i = 0; i < rqd->nr_ppas; ) {
struct ppa_addr ppa;
int pos;
w_ptr = pblk_alloc_page(pblk, line, pblk->min_write_pgs);
ppa = addr_to_pblk_ppa(pblk, w_ptr, line->id);
pos = pblk_ppa_to_pos(geo, ppa);
while (test_bit(pos, line->blk_bitmap)) {
w_ptr += pblk->min_write_pgs;
ppa = addr_to_pblk_ppa(pblk, w_ptr, line->id);
pos = pblk_ppa_to_pos(geo, ppa);
}
for (j = 0; j < pblk->min_write_pgs; j++, i++, w_ptr++) {
struct ppa_addr dev_ppa;
lightnvm: pblk: fix bad le64 assignations Use the right types and conversions on le64 variables. Reported by sparse. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:34 +08:00
__le64 addr_empty = cpu_to_le64(ADDR_EMPTY);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
dev_ppa = addr_to_gen_ppa(pblk, w_ptr, line->id);
pblk_map_invalidate(pblk, dev_ppa);
lightnvm: pblk: spare double cpu_to_le64 calc. Spare a double calculation on the fast write path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:12 +08:00
lba_list[w_ptr] = meta_list[i].lba = addr_empty;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
rqd->ppa_list[i] = dev_ppa;
}
}
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
kref_get(&pad_rq->ref);
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
pblk_down_page(pblk, rqd->ppa_list, rqd->nr_ppas);
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
ret = pblk_submit_io(pblk, rqd);
if (ret) {
pr_err("pblk: I/O submission failed: %d\n", ret);
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
pblk_up_page(pblk, rqd->ppa_list, rqd->nr_ppas);
goto fail_free_bio;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
}
left_line_ppas -= rq_ppas;
left_ppas -= rq_ppas;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
if (left_ppas && left_line_ppas)
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
goto next_pad_rq;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
kref_put(&pad_rq->ref, pblk_recov_complete);
if (!wait_for_completion_io_timeout(&pad_rq->wait,
msecs_to_jiffies(PBLK_COMMAND_TIMEOUT_MS))) {
pr_err("pblk: pad write timed out\n");
ret = -ETIME;
}
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
if (!pblk_line_is_full(line))
pr_err("pblk: corrupted padded line: %d\n", line->id);
vfree(data);
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
free_rq:
kfree(pad_rq);
return ret;
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
fail_free_bio:
bio_put(bio);
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
fail_free_meta:
nvm_dev_dma_free(dev->parent, meta_list, dma_meta_list);
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
fail_free_pad:
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
kfree(pad_rq);
lightnvm: pblk: control I/O flow also on tear down When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-08 03:08:52 +08:00
vfree(data);
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
return ret;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
}
/* When this function is called, it means that not all upper pages have been
* written in a page that contains valid data. In order to recover this data, we
* first find the write pointer on the device, then we pad all necessary
* sectors, and finally attempt to read the valid data
*/
static int pblk_recov_scan_all_oob(struct pblk *pblk, struct pblk_line *line,
struct pblk_recov_alloc p)
{
struct nvm_tgt_dev *dev = pblk->dev;
struct nvm_geo *geo = &dev->geo;
struct ppa_addr *ppa_list;
struct pblk_sec_meta *meta_list;
struct nvm_rq *rqd;
struct bio *bio;
void *data;
dma_addr_t dma_ppa_list, dma_meta_list;
u64 w_ptr = 0, r_ptr;
int rq_ppas, rq_len;
int i, j;
int ret = 0;
int rec_round;
int left_ppas = pblk_calc_sec_in_line(pblk, line) - line->cur_sec;
DECLARE_COMPLETION_ONSTACK(wait);
ppa_list = p.ppa_list;
meta_list = p.meta_list;
rqd = p.rqd;
data = p.data;
dma_ppa_list = p.dma_ppa_list;
dma_meta_list = p.dma_meta_list;
/* we could recover up until the line write pointer */
r_ptr = line->cur_sec;
rec_round = 0;
next_rq:
lightnvm: pblk: rename read request pool Read requests allocate some extra memory to store its per I/O context. Instead of requiring yet another memory pool for other type of requests, generalize this context allocation (and change naming accordingly). Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27 06:27:13 +08:00
memset(rqd, 0, pblk_g_rq_size);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
rq_ppas = pblk_calc_secs(pblk, left_ppas, 0);
if (!rq_ppas)
rq_ppas = pblk->min_write_pgs;
rq_len = rq_ppas * geo->sec_size;
bio = bio_map_kern(dev->q, data, rq_len, GFP_KERNEL);
if (IS_ERR(bio))
return PTR_ERR(bio);
bio->bi_iter.bi_sector = 0; /* internal bio */
bio_set_op_attrs(bio, REQ_OP_READ, 0);
rqd->bio = bio;
rqd->opcode = NVM_OP_PREAD;
rqd->meta_list = meta_list;
rqd->nr_ppas = rq_ppas;
rqd->ppa_list = ppa_list;
rqd->dma_ppa_list = dma_ppa_list;
rqd->dma_meta_list = dma_meta_list;
rqd->end_io = pblk_end_io_sync;
rqd->private = &wait;
lightnvm: pblk: issue multiplane reads if possible If a read request is sequential and its size aligns with a multi-plane page size, use the multi-plane hint to process the I/O in parallel in the controller. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:20 +08:00
if (pblk_io_aligned(pblk, rq_ppas))
rqd->flags = pblk_set_read_mode(pblk, PBLK_READ_SEQUENTIAL);
else
rqd->flags = pblk_set_read_mode(pblk, PBLK_READ_RANDOM);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
for (i = 0; i < rqd->nr_ppas; ) {
struct ppa_addr ppa;
int pos;
w_ptr = pblk_alloc_page(pblk, line, pblk->min_write_pgs);
ppa = addr_to_gen_ppa(pblk, w_ptr, line->id);
pos = pblk_dev_ppa_to_pos(geo, ppa);
while (test_bit(pos, line->blk_bitmap)) {
w_ptr += pblk->min_write_pgs;
ppa = addr_to_gen_ppa(pblk, w_ptr, line->id);
pos = pblk_dev_ppa_to_pos(geo, ppa);
}
for (j = 0; j < pblk->min_write_pgs; j++, i++, w_ptr++)
rqd->ppa_list[i] =
addr_to_gen_ppa(pblk, w_ptr, line->id);
}
ret = pblk_submit_io(pblk, rqd);
if (ret) {
pr_err("pblk: I/O submission failed: %d\n", ret);
return ret;
}
if (!wait_for_completion_io_timeout(&wait,
msecs_to_jiffies(PBLK_COMMAND_TIMEOUT_MS))) {
pr_err("pblk: L2P recovery read timed out\n");
}
lightnvm: pblk: fail gracefully on irrec. error Due to user writes being decoupled from media writes because of the need of an intermediate write buffer, irrecoverable media write errors lead to pblk stalling; user writes fill up the buffer and end up in an infinite retry loop. In order to let user writes fail gracefully, it is necessary for pblk to keep track of its own internal state and prevent further writes from being placed into the write buffer. This patch implements a state machine to keep track of internal errors and, in case of failure, fail further user writes in an standard way. Depending on the type of error, pblk will do its best to persist buffered writes (which are already acknowledged) and close down on a graceful manner. This way, data might be recovered by re-instantiating pblk. Such state machine paves out the way for a state-based FTL log. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:29 +08:00
atomic_dec(&pblk->inflight_io);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
reinit_completion(&wait);
/* This should not happen since the read failed during normal recovery,
* but the media works funny sometimes...
*/
if (!rec_round++ && !rqd->error) {
rec_round = 0;
for (i = 0; i < rqd->nr_ppas; i++, r_ptr++) {
u64 lba = le64_to_cpu(meta_list[i].lba);
if (lba == ADDR_EMPTY || lba > pblk->rl.nr_secs)
continue;
pblk_update_map(pblk, lba, rqd->ppa_list[i]);
}
}
/* Reached the end of the written line */
if (rqd->error == NVM_RSP_ERR_EMPTYPAGE) {
int pad_secs, nr_error_bits, bit;
int ret;
bit = find_first_bit((void *)&rqd->ppa_status, rqd->nr_ppas);
nr_error_bits = rqd->nr_ppas - bit;
/* Roll back failed sectors */
line->cur_sec -= nr_error_bits;
line->left_msecs += nr_error_bits;
bitmap_clear(line->map_bitmap, line->cur_sec, nr_error_bits);
pad_secs = pblk_pad_distance(pblk);
if (pad_secs > line->left_msecs)
pad_secs = line->left_msecs;
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
ret = pblk_recov_pad_oob(pblk, line, pad_secs);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
if (ret)
pr_err("pblk: OOB padding failed (err:%d)\n", ret);
ret = pblk_recov_read_oob(pblk, line, p, r_ptr);
if (ret)
pr_err("pblk: OOB read failed (err:%d)\n", ret);
left_ppas = 0;
}
left_ppas -= rq_ppas;
if (left_ppas > 0)
goto next_rq;
return ret;
}
static int pblk_recov_scan_oob(struct pblk *pblk, struct pblk_line *line,
struct pblk_recov_alloc p, int *done)
{
struct nvm_tgt_dev *dev = pblk->dev;
struct nvm_geo *geo = &dev->geo;
struct ppa_addr *ppa_list;
struct pblk_sec_meta *meta_list;
struct nvm_rq *rqd;
struct bio *bio;
void *data;
dma_addr_t dma_ppa_list, dma_meta_list;
u64 paddr;
int rq_ppas, rq_len;
int i, j;
int ret = 0;
int left_ppas = pblk_calc_sec_in_line(pblk, line);
DECLARE_COMPLETION_ONSTACK(wait);
ppa_list = p.ppa_list;
meta_list = p.meta_list;
rqd = p.rqd;
data = p.data;
dma_ppa_list = p.dma_ppa_list;
dma_meta_list = p.dma_meta_list;
*done = 1;
next_rq:
lightnvm: pblk: rename read request pool Read requests allocate some extra memory to store its per I/O context. Instead of requiring yet another memory pool for other type of requests, generalize this context allocation (and change naming accordingly). Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27 06:27:13 +08:00
memset(rqd, 0, pblk_g_rq_size);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
rq_ppas = pblk_calc_secs(pblk, left_ppas, 0);
if (!rq_ppas)
rq_ppas = pblk->min_write_pgs;
rq_len = rq_ppas * geo->sec_size;
bio = bio_map_kern(dev->q, data, rq_len, GFP_KERNEL);
if (IS_ERR(bio))
return PTR_ERR(bio);
bio->bi_iter.bi_sector = 0; /* internal bio */
bio_set_op_attrs(bio, REQ_OP_READ, 0);
rqd->bio = bio;
rqd->opcode = NVM_OP_PREAD;
rqd->meta_list = meta_list;
rqd->nr_ppas = rq_ppas;
rqd->ppa_list = ppa_list;
rqd->dma_ppa_list = dma_ppa_list;
rqd->dma_meta_list = dma_meta_list;
rqd->end_io = pblk_end_io_sync;
rqd->private = &wait;
lightnvm: pblk: issue multiplane reads if possible If a read request is sequential and its size aligns with a multi-plane page size, use the multi-plane hint to process the I/O in parallel in the controller. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:20 +08:00
if (pblk_io_aligned(pblk, rq_ppas))
rqd->flags = pblk_set_read_mode(pblk, PBLK_READ_SEQUENTIAL);
else
rqd->flags = pblk_set_read_mode(pblk, PBLK_READ_RANDOM);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
for (i = 0; i < rqd->nr_ppas; ) {
struct ppa_addr ppa;
int pos;
paddr = pblk_alloc_page(pblk, line, pblk->min_write_pgs);
ppa = addr_to_gen_ppa(pblk, paddr, line->id);
pos = pblk_dev_ppa_to_pos(geo, ppa);
while (test_bit(pos, line->blk_bitmap)) {
paddr += pblk->min_write_pgs;
ppa = addr_to_gen_ppa(pblk, paddr, line->id);
pos = pblk_dev_ppa_to_pos(geo, ppa);
}
for (j = 0; j < pblk->min_write_pgs; j++, i++, paddr++)
rqd->ppa_list[i] =
addr_to_gen_ppa(pblk, paddr, line->id);
}
ret = pblk_submit_io(pblk, rqd);
if (ret) {
pr_err("pblk: I/O submission failed: %d\n", ret);
bio_put(bio);
return ret;
}
if (!wait_for_completion_io_timeout(&wait,
msecs_to_jiffies(PBLK_COMMAND_TIMEOUT_MS))) {
pr_err("pblk: L2P recovery read timed out\n");
}
lightnvm: pblk: fail gracefully on irrec. error Due to user writes being decoupled from media writes because of the need of an intermediate write buffer, irrecoverable media write errors lead to pblk stalling; user writes fill up the buffer and end up in an infinite retry loop. In order to let user writes fail gracefully, it is necessary for pblk to keep track of its own internal state and prevent further writes from being placed into the write buffer. This patch implements a state machine to keep track of internal errors and, in case of failure, fail further user writes in an standard way. Depending on the type of error, pblk will do its best to persist buffered writes (which are already acknowledged) and close down on a graceful manner. This way, data might be recovered by re-instantiating pblk. Such state machine paves out the way for a state-based FTL log. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:29 +08:00
atomic_dec(&pblk->inflight_io);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
reinit_completion(&wait);
/* Reached the end of the written line */
if (rqd->error) {
int nr_error_bits, bit;
bit = find_first_bit((void *)&rqd->ppa_status, rqd->nr_ppas);
nr_error_bits = rqd->nr_ppas - bit;
/* Roll back failed sectors */
line->cur_sec -= nr_error_bits;
line->left_msecs += nr_error_bits;
bitmap_clear(line->map_bitmap, line->cur_sec, nr_error_bits);
left_ppas = 0;
rqd->nr_ppas = bit;
if (rqd->error != NVM_RSP_ERR_EMPTYPAGE)
*done = 0;
}
for (i = 0; i < rqd->nr_ppas; i++) {
u64 lba = le64_to_cpu(meta_list[i].lba);
if (lba == ADDR_EMPTY || lba > pblk->rl.nr_secs)
continue;
pblk_update_map(pblk, lba, rqd->ppa_list[i]);
}
left_ppas -= rq_ppas;
if (left_ppas > 0)
goto next_rq;
return ret;
}
/* Scan line for lbas on out of bound area */
static int pblk_recov_l2p_from_oob(struct pblk *pblk, struct pblk_line *line)
{
struct nvm_tgt_dev *dev = pblk->dev;
struct nvm_geo *geo = &dev->geo;
struct nvm_rq *rqd;
struct ppa_addr *ppa_list;
struct pblk_sec_meta *meta_list;
struct pblk_recov_alloc p;
void *data;
dma_addr_t dma_ppa_list, dma_meta_list;
int done, ret = 0;
meta_list = nvm_dev_dma_alloc(dev->parent, GFP_KERNEL, &dma_meta_list);
lightnvm: pblk: remove checks on mempool alloc. As part of the mempool audit on pblk, remove unnecessary mempool allocation checks on mempools. Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:10 +08:00
if (!meta_list)
return -ENOMEM;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
ppa_list = (void *)(meta_list) + pblk_dma_meta_size;
dma_ppa_list = dma_meta_list + pblk_dma_meta_size;
data = kcalloc(pblk->max_write_pgs, geo->sec_size, GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
goto free_meta_list;
}
lightnvm: pblk: improve naming for internal req. Each request type sent to the LightNVM subsystem requires different metadata. Until now, we have tailored this metadata based on write, read and erase commands. However, pblk uses different metadata for internal writes that do not hit the write buffer. Instead of abusing the metadata for reads, create a new request type - internal write to improve code readability. In the process, create internal values for each I/O type instead of abusing the READ/WRITE macros, as suggested by Christoph. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:19 +08:00
rqd = pblk_alloc_rqd(pblk, PBLK_READ);
lightnvm: pblk: remove checks on mempool alloc. As part of the mempool audit on pblk, remove unnecessary mempool allocation checks on mempools. Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:10 +08:00
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
p.ppa_list = ppa_list;
p.meta_list = meta_list;
p.rqd = rqd;
p.data = data;
p.dma_ppa_list = dma_ppa_list;
p.dma_meta_list = dma_meta_list;
ret = pblk_recov_scan_oob(pblk, line, p, &done);
if (ret) {
pr_err("pblk: could not recover L2P from OOB\n");
goto out;
}
if (!done) {
ret = pblk_recov_scan_all_oob(pblk, line, p);
if (ret) {
pr_err("pblk: could not recover L2P from OOB\n");
goto out;
}
}
if (pblk_line_is_full(line))
pblk_line_recov_close(pblk, line);
out:
kfree(data);
free_meta_list:
nvm_dev_dma_free(dev->parent, meta_list, dma_meta_list);
return ret;
}
/* Insert lines ordered by sequence number (seq_num) on list */
static void pblk_recov_line_add_ordered(struct list_head *head,
struct pblk_line *line)
{
struct pblk_line *t = NULL;
list_for_each_entry(t, head, list)
if (t->seq_nr > line->seq_nr)
break;
__list_add(&line->list, t->list.prev, &t->list);
}
struct pblk_line *pblk_recov_l2p(struct pblk *pblk)
{
struct nvm_tgt_dev *dev = pblk->dev;
struct nvm_geo *geo = &dev->geo;
struct pblk_line_meta *lm = &pblk->lm;
struct pblk_line_mgmt *l_mg = &pblk->l_mg;
struct pblk_line *line, *tline, *data_line = NULL;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
struct pblk_smeta *smeta;
struct pblk_emeta *emeta;
struct line_smeta *smeta_buf;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
int found_lines = 0, recovered_lines = 0, open_lines = 0;
int is_next = 0;
int meta_line;
int i, valid_uuid = 0;
LIST_HEAD(recov_list);
/* TODO: Implement FTL snapshot */
/* Scan recovery - takes place when FTL snapshot fails */
spin_lock(&l_mg->free_lock);
meta_line = find_first_zero_bit(&l_mg->meta_bitmap, PBLK_DATA_LINES);
set_bit(meta_line, &l_mg->meta_bitmap);
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
smeta = l_mg->sline_meta[meta_line];
emeta = l_mg->eline_meta[meta_line];
lightnvm: pblk: use right metadata buffer for recovery Fix bad metadata buffer assignations introduced when refactoring the medatada write path. Fixes: dd2a43437337 lightnvm: pblk: sched. metadata on write thread Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:38 +08:00
smeta_buf = (struct line_smeta *)smeta;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
spin_unlock(&l_mg->free_lock);
/* Order data lines using their sequence number */
for (i = 0; i < l_mg->nr_lines; i++) {
u32 crc;
line = &pblk->lines[i];
memset(smeta, 0, lm->smeta_len);
line->smeta = smeta;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
line->lun_bitmap = ((void *)(smeta_buf)) +
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
sizeof(struct line_smeta);
/* Lines that cannot be read are assumed as not written here */
if (pblk_line_read_smeta(pblk, line))
continue;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
crc = pblk_calc_smeta_crc(pblk, smeta_buf);
if (le32_to_cpu(smeta_buf->crc) != crc)
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
continue;
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
if (le32_to_cpu(smeta_buf->header.identifier) != PBLK_MAGIC)
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
continue;
lightnvm: pblk: print incompatible line version correctly Correct it by converting little endian to cpu endian and also define a macro for line version so that maintenance is easy. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:45:59 +08:00
if (smeta_buf->header.version != SMETA_VERSION) {
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
pr_err("pblk: found incompatible line version %u\n",
lightnvm: pblk: print incompatible line version correctly Correct it by converting little endian to cpu endian and also define a macro for line version so that maintenance is easy. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:45:59 +08:00
le16_to_cpu(smeta_buf->header.version));
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
return ERR_PTR(-EINVAL);
}
/* The first valid instance uuid is used for initialization */
if (!valid_uuid) {
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
memcpy(pblk->instance_uuid, smeta_buf->header.uuid, 16);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
valid_uuid = 1;
}
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
if (memcmp(pblk->instance_uuid, smeta_buf->header.uuid, 16)) {
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
pr_debug("pblk: ignore line %u due to uuid mismatch\n",
i);
continue;
}
/* Update line metadata */
spin_lock(&line->lock);
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
line->id = le32_to_cpu(smeta_buf->header.id);
line->type = le16_to_cpu(smeta_buf->header.type);
line->seq_nr = le64_to_cpu(smeta_buf->seq_nr);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
spin_unlock(&line->lock);
/* Update general metadata */
spin_lock(&l_mg->free_lock);
if (line->seq_nr >= l_mg->d_seq_nr)
l_mg->d_seq_nr = line->seq_nr + 1;
l_mg->nr_free_lines--;
spin_unlock(&l_mg->free_lock);
if (pblk_line_recov_alloc(pblk, line))
goto out;
pblk_recov_line_add_ordered(&recov_list, line);
found_lines++;
pr_debug("pblk: recovering data line %d, seq:%llu\n",
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
line->id, smeta_buf->seq_nr);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
}
if (!found_lines) {
pblk_setup_uuid(pblk);
spin_lock(&l_mg->free_lock);
WARN_ON_ONCE(!test_and_clear_bit(meta_line,
&l_mg->meta_bitmap));
spin_unlock(&l_mg->free_lock);
goto out;
}
/* Verify closed blocks and recover this portion of L2P table*/
list_for_each_entry_safe(line, tline, &recov_list, list) {
int off, nr_bb;
recovered_lines++;
/* Calculate where emeta starts based on the line bb */
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
off = lm->sec_per_line - lm->emeta_sec[0];
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
nr_bb = bitmap_weight(line->blk_bitmap, lm->blk_per_line);
off -= nr_bb * geo->sec_per_pl;
line->emeta_ssec = off;
lightnvm: pblk: use right metadata buffer for recovery Fix bad metadata buffer assignations introduced when refactoring the medatada write path. Fixes: dd2a43437337 lightnvm: pblk: sched. metadata on write thread Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:38 +08:00
line->emeta = emeta;
memset(line->emeta->buf, 0, lm->emeta_len[0]);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
lightnvm: pblk: sched. metadata on write thread At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:17 +08:00
if (pblk_line_read_emeta(pblk, line, line->emeta->buf)) {
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
pblk_recov_l2p_from_oob(pblk, line);
goto next;
}
if (pblk_recov_l2p_from_emeta(pblk, line))
pblk_recov_l2p_from_oob(pblk, line);
next:
if (pblk_line_is_full(line)) {
struct list_head *move_list;
spin_lock(&line->lock);
line->state = PBLK_LINESTATE_CLOSED;
move_list = pblk_line_gc_list(pblk, line);
spin_unlock(&line->lock);
spin_lock(&l_mg->gc_lock);
list_move_tail(&line->list, move_list);
spin_unlock(&l_mg->gc_lock);
lightnvm: pblk: do not use a mempool for line bitmaps pblk holds two sector bitmaps: one to keep track of the mapped sectors while the line is active and another one to keep track of the invalid sectors. The latter is kept during the whole live of the line, until it is recycled. Since we cannot guarantee forward progress for the mempool in this case, get rid of the mempool and simply allocate memory through kmalloc. Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 20:46:09 +08:00
kfree(line->map_bitmap);
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
line->map_bitmap = NULL;
line->smeta = NULL;
line->emeta = NULL;
} else {
if (open_lines > 1)
pr_err("pblk: failed to recover L2P\n");
open_lines++;
line->meta_line = meta_line;
data_line = line;
}
}
spin_lock(&l_mg->free_lock);
if (!open_lines) {
WARN_ON_ONCE(!test_and_clear_bit(meta_line,
&l_mg->meta_bitmap));
pblk_line_replace_data(pblk);
} else {
/* Allocate next line for preparation */
l_mg->data_next = pblk_line_get(pblk);
if (l_mg->data_next) {
l_mg->data_next->seq_nr = l_mg->d_seq_nr++;
l_mg->data_next->type = PBLK_LINETYPE_DATA;
is_next = 1;
}
}
spin_unlock(&l_mg->free_lock);
if (is_next) {
pblk_line_erase(pblk, l_mg->data_next);
pblk_rl_free_lines_dec(&pblk->rl, l_mg->data_next);
}
out:
if (found_lines != recovered_lines)
pr_err("pblk: failed to recover all found lines %d/%d\n",
found_lines, recovered_lines);
return data_line;
}
/*
lightnvm: pblk: fail gracefully on irrec. error Due to user writes being decoupled from media writes because of the need of an intermediate write buffer, irrecoverable media write errors lead to pblk stalling; user writes fill up the buffer and end up in an infinite retry loop. In order to let user writes fail gracefully, it is necessary for pblk to keep track of its own internal state and prevent further writes from being placed into the write buffer. This patch implements a state machine to keep track of internal errors and, in case of failure, fail further user writes in an standard way. Depending on the type of error, pblk will do its best to persist buffered writes (which are already acknowledged) and close down on a graceful manner. This way, data might be recovered by re-instantiating pblk. Such state machine paves out the way for a state-based FTL log. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:29 +08:00
* Pad current line
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
*/
lightnvm: pblk: fail gracefully on irrec. error Due to user writes being decoupled from media writes because of the need of an intermediate write buffer, irrecoverable media write errors lead to pblk stalling; user writes fill up the buffer and end up in an infinite retry loop. In order to let user writes fail gracefully, it is necessary for pblk to keep track of its own internal state and prevent further writes from being placed into the write buffer. This patch implements a state machine to keep track of internal errors and, in case of failure, fail further user writes in an standard way. Depending on the type of error, pblk will do its best to persist buffered writes (which are already acknowledged) and close down on a graceful manner. This way, data might be recovered by re-instantiating pblk. Such state machine paves out the way for a state-based FTL log. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:29 +08:00
int pblk_recov_pad(struct pblk *pblk)
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
{
struct pblk_line *line;
struct pblk_line_mgmt *l_mg = &pblk->l_mg;
lightnvm: pblk: fail gracefully on irrec. error Due to user writes being decoupled from media writes because of the need of an intermediate write buffer, irrecoverable media write errors lead to pblk stalling; user writes fill up the buffer and end up in an infinite retry loop. In order to let user writes fail gracefully, it is necessary for pblk to keep track of its own internal state and prevent further writes from being placed into the write buffer. This patch implements a state machine to keep track of internal errors and, in case of failure, fail further user writes in an standard way. Depending on the type of error, pblk will do its best to persist buffered writes (which are already acknowledged) and close down on a graceful manner. This way, data might be recovered by re-instantiating pblk. Such state machine paves out the way for a state-based FTL log. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:29 +08:00
int left_msecs;
int ret = 0;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
spin_lock(&l_mg->free_lock);
line = l_mg->data_line;
lightnvm: pblk: fail gracefully on irrec. error Due to user writes being decoupled from media writes because of the need of an intermediate write buffer, irrecoverable media write errors lead to pblk stalling; user writes fill up the buffer and end up in an infinite retry loop. In order to let user writes fail gracefully, it is necessary for pblk to keep track of its own internal state and prevent further writes from being placed into the write buffer. This patch implements a state machine to keep track of internal errors and, in case of failure, fail further user writes in an standard way. Depending on the type of error, pblk will do its best to persist buffered writes (which are already acknowledged) and close down on a graceful manner. This way, data might be recovered by re-instantiating pblk. Such state machine paves out the way for a state-based FTL log. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:29 +08:00
left_msecs = line->left_msecs;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
spin_unlock(&l_mg->free_lock);
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
ret = pblk_recov_pad_oob(pblk, line, left_msecs);
lightnvm: pblk: fail gracefully on irrec. error Due to user writes being decoupled from media writes because of the need of an intermediate write buffer, irrecoverable media write errors lead to pblk stalling; user writes fill up the buffer and end up in an infinite retry loop. In order to let user writes fail gracefully, it is necessary for pblk to keep track of its own internal state and prevent further writes from being placed into the write buffer. This patch implements a state machine to keep track of internal errors and, in case of failure, fail further user writes in an standard way. Depending on the type of error, pblk will do its best to persist buffered writes (which are already acknowledged) and close down on a graceful manner. This way, data might be recovered by re-instantiating pblk. Such state machine paves out the way for a state-based FTL log. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:29 +08:00
if (ret) {
pr_err("pblk: Tear down padding failed (%d)\n", ret);
lightnvm: pblk: remove target using async. I/Os When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30 23:56:40 +08:00
return ret;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
}
lightnvm: pblk: fail gracefully on irrec. error Due to user writes being decoupled from media writes because of the need of an intermediate write buffer, irrecoverable media write errors lead to pblk stalling; user writes fill up the buffer and end up in an infinite retry loop. In order to let user writes fail gracefully, it is necessary for pblk to keep track of its own internal state and prevent further writes from being placed into the write buffer. This patch implements a state machine to keep track of internal errors and, in case of failure, fail further user writes in an standard way. Depending on the type of error, pblk will do its best to persist buffered writes (which are already acknowledged) and close down on a graceful manner. This way, data might be recovered by re-instantiating pblk. Such state machine paves out the way for a state-based FTL log. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 17:57:29 +08:00
pblk_line_close_meta(pblk, line);
return ret;
lightnvm: physical block device (pblk) target This patch introduces pblk, a host-side translation layer for Open-Channel SSDs to expose them like block devices. The translation layer allows data placement decisions, and I/O scheduling to be managed by the host, enabling users to optimize the SSD for their specific workloads. An open-channel SSD has a set of LUNs (parallel units) and a collection of blocks. Each block can be read in any order, but writes must be sequential. Writes may also fail, and if a block requires it, must also be reset before new writes can be applied. To manage the constraints, pblk maintains a logical to physical address (L2P) table, write cache, garbage collection logic, recovery scheme, and logic to rate-limit user I/Os versus garbage collection I/Os. The L2P table is fully-associative and manages sectors at a 4KB granularity. Pblk stores the L2P table in two places, in the out-of-band area of the media and on the last page of a line. In the cause of a power failure, pblk will perform a scan to recover the L2P table. The user data is organized into lines. A line is data striped across blocks and LUNs. The lines enable the host to reduce the amount of metadata to maintain besides the user data and makes it easier to implement RAID or erasure coding in the future. pblk implements multi-tenant support and can be instantiated multiple times on the same drive. Each instance owns a portion of the SSD - both regarding I/O bandwidth and capacity - providing I/O isolation for each case. Finally, pblk also exposes a sysfs interface that allows user-space to peek into the internals of pblk. The interface is available at /dev/block/*/pblk/ where * is the block device name exposed. This work also contains contributions from: Matias Bjørling <matias@cnexlabs.com> Simon A. F. Lund <slund@cnexlabs.com> Young Tack Jin <youngtack.jin@gmail.com> Huaicheng Li <huaicheng@cs.uchicago.edu> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 02:55:50 +08:00
}
Copy Permalink