renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 22:53:55 +08:00
Code
3aa3e8407a
linux-next/arch/arm/mach-ep93xx/include/mach/platform.h

58 lines
1.6 KiB
C
Raw Normal View History

[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 01:10:13 +08:00
/*
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-05 23:14:15 +08:00
* arch/arm/mach-ep93xx/include/mach/platform.h
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 01:10:13 +08:00
*/
#ifndef __ASSEMBLY__
ARM: 5754/1: ep93xx: update i2c support Update the ep93xx i2c support: 1) The platform init code passes the configuration data for the i2c-gpio driver. This allows any gpio pin do be used for the sda and scl pins. It also allows the platform to specify the udelay and timeout. 2) Program the gpio configuration register to enable/disable the open drain drivers. Note that this really only works if the sda and scl pins are set to EP93XX_GPIO_LINE_EEDAT and EP93XX_GPIO_LINE_EECLK. 3) Update the edb93xx.c platform init to use the new support. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-08 07:45:00 +08:00
struct i2c_gpio_platform_data;
[ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_info Fix build warnings due to struct i2c_board_info in <mach/platform.h> Patch "5311/1: add core support for built in i2c bus" is causing 11 of 39 the build warnings with Kautobuild for ep93xx_defconfig on kernel 2.6.29-rc5-git4. This patch fixes it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-06 00:33:50 +08:00
struct i2c_board_info;
ARM: 6124/1: ep93xx: SPI driver platform support code This patch adds platform side support code for the EP93xx SPI driver. This includes clock, resources and muxing. There is a new function: ep93xx_register_spi() which can be used by board support code to register new SPI devices for the board. This patch depends on patch 5998/1 ep93xx: added chip revision reading function Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Martin Guy <martinwguy@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-11 22:34:54 +08:00
struct spi_board_info;
ARM: 5628/1: ep93xx: Introduce Pulse Width Modulator (PWM) driver The EP93xx features two PWMs (one on the EP9307) with the following features: * Configurable dual output * Separate input clocks for each PWM output * 16-bit resolution * Programmable pulse width (duty cycle), interval (frequency), and polarity This adds the necessary core support as well as the driver. A sysfs interface is provided to control the PWM outputs. Signed-off-by: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30 05:41:06 +08:00
struct platform_device;
ep93xx video driver platform support Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Daniele Venzano <linux@brownhat.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:47:09 +08:00
struct ep93xxfb_mach_info;
ARM: 5775/1: ep93xx: add keypad core support Add the core support needed by the ep93xx matrix keypad driver. The keypad driver unfortunately was merged early and the core support is missing. The clkdev support has been resolved and is now merged. This adds the platform device to the ep93xx core and supplies the functions needed to acquire/free the gpio pins and actually enable/disable the controller peripheral. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-29 04:04:46 +08:00
struct ep93xx_keypad_platform_data;
ARM: 6124/1: ep93xx: SPI driver platform support code This patch adds platform side support code for the EP93xx SPI driver. This includes clock, resources and muxing. There is a new function: ep93xx_register_spi() which can be used by board support code to register new SPI devices for the board. This patch depends on patch 5998/1 ep93xx: added chip revision reading function Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Martin Guy <martinwguy@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-11 22:34:54 +08:00
struct ep93xx_spi_info;
[ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_info Fix build warnings due to struct i2c_board_info in <mach/platform.h> Patch "5311/1: add core support for built in i2c bus" is causing 11 of 39 the build warnings with Kautobuild for ep93xx_defconfig on kernel 2.6.29-rc5-git4. This patch fixes it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-06 00:33:50 +08:00
[PATCH] Cirrus Logic ep93xx ethernet driver The Cirrus Logic ep93xx is an ARM SoC that includes an ethernet MAC -- this patch adds a driver for that ethernet MAC. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-22 08:28:13 +08:00
struct ep93xx_eth_data
{
unsigned char dev_addr[6];
unsigned char phy_id;
};
[ARM] 5273/2: ep93xx: move ethernet support into core.c All EP93xx based systems can support Ethernet. This patch moves the platform_device setup from the various board support files into the core support file. The Ethernet driver data still remains in the individual platform setup files to allow specific platform configuration. This also adds Ethernet support to the edb9302, edb9312, and edb9315 platforms. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-05 03:01:49 +08:00
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
[ARM] 5577/2: ep93xx: syscon locked register functions Add core functions to handle writes to the ep93xx software locked registers. There are a number of registers in the EP93xx System Controller that require a write to the software lock register before they can be updated. This patch adds a number of exported functions to the ep93xx core that handle this access. The software locked clock divider registers, VidClkDiv, MIRClkDiv, I2SClkDiv and KeyTchClkDiv would typically involve writing a specific value to the register. To support this the ep93xx_syscon_swlocked_write() function is provided. For the DeviceCfg register it's more typical to only need to set or clear a single bit. A generic ep93xx_devcfg_set_clear() function is provided to handle both operations. Two inline functions, ep93xx_devcfg_set_bits() and ep93xx_devcfg_clear_bits() are also provided to improve code readability. In addition, the remaining bits in the System Controller Device Config Register have been documented and the previously defined names shortened. All code paths that use this functionality have been updated except for arch/arm/kernel/crunch.c. That code is in a context switch path, which is not reentrant, so it is safe against itself. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-08 09:00:49 +08:00
ARM: 5998/1: ep93xx: added chip revision reading function Added a new function: ep93xx_chip_revision() which reads chip revision from the sysconfig register. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-27 19:05:14 +08:00
#define EP93XX_CHIP_REV_D0 3
#define EP93XX_CHIP_REV_D1 4
#define EP93XX_CHIP_REV_E0 5
#define EP93XX_CHIP_REV_E1 6
#define EP93XX_CHIP_REV_E2 7
unsigned int ep93xx_chip_revision(void);
ARM: 6168/1: ep93xx: move physmap flash registration into core.c Create a core.c __init function to handle the physmap flash registration for all the ep93xx platforms. Also, modify all the ep93xx platforms to use this new function. This simplifies all the ep93xx platform init code and reduces the size of the kernel when including multiple ep93xx boards. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Martin Guy <martinwguy@gmail.com> Acked-by: Hubert Feurstein <hubert.feurstein@contec.at> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-10 23:19:08 +08:00
void ep93xx_register_flash(unsigned int width,
resource_size_t start, resource_size_t size);
[ARM] 5273/2: ep93xx: move ethernet support into core.c All EP93xx based systems can support Ethernet. This patch moves the platform_device setup from the various board support files into the core support file. The Ethernet driver data still remains in the individual platform setup files to allow specific platform configuration. This also adds Ethernet support to the edb9302, edb9312, and edb9315 platforms. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-05 03:01:49 +08:00
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
ARM: 5754/1: ep93xx: update i2c support Update the ep93xx i2c support: 1) The platform init code passes the configuration data for the i2c-gpio driver. This allows any gpio pin do be used for the sda and scl pins. It also allows the platform to specify the udelay and timeout. 2) Program the gpio configuration register to enable/disable the open drain drivers. Note that this really only works if the sda and scl pins are set to EP93XX_GPIO_LINE_EEDAT and EP93XX_GPIO_LINE_EECLK. 3) Update the edb93xx.c platform init to use the new support. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-08 07:45:00 +08:00
void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
struct i2c_board_info *devices, int num);
ARM: 6124/1: ep93xx: SPI driver platform support code This patch adds platform side support code for the EP93xx SPI driver. This includes clock, resources and muxing. There is a new function: ep93xx_register_spi() which can be used by board support code to register new SPI devices for the board. This patch depends on patch 5998/1 ep93xx: added chip revision reading function Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Martin Guy <martinwguy@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-11 22:34:54 +08:00
void ep93xx_register_spi(struct ep93xx_spi_info *info,
struct spi_board_info *devices, int num);
ep93xx video driver platform support Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Daniele Venzano <linux@brownhat.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:47:09 +08:00
void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
ARM: 5628/1: ep93xx: Introduce Pulse Width Modulator (PWM) driver The EP93xx features two PWMs (one on the EP9307) with the following features: * Configurable dual output * Separate input clocks for each PWM output * 16-bit resolution * Programmable pulse width (duty cycle), interval (frequency), and polarity This adds the necessary core support as well as the driver. A sysfs interface is provided to control the PWM outputs. Signed-off-by: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30 05:41:06 +08:00
void ep93xx_register_pwm(int pwm0, int pwm1);
int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
void ep93xx_pwm_release_gpio(struct platform_device *pdev);
ARM: 5775/1: ep93xx: add keypad core support Add the core support needed by the ep93xx matrix keypad driver. The keypad driver unfortunately was merged early and the core support is missing. The clkdev support has been resolved and is now merged. This adds the platform device to the ep93xx core and supplies the functions needed to acquire/free the gpio pins and actually enable/disable the controller peripheral. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-29 04:04:46 +08:00
void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
void ep93xx_keypad_release_gpio(struct platform_device *pdev);
EP93xx: Add i2s core support Add core support for EP93xx i2s audio Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-06-08 18:01:10 +08:00
void ep93xx_register_i2s(void);
ep93xx: Don't use system controller defines in audio drivers Both the Snapper CL15 and EDB93xx audio drivers set the same audio configuration in ep93xx_i2s_acquire. Remove the arguments to ep93xx_i2s_acquire so that the audio drivers no longer need the EP93XX_SYSCON defines exported. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com>
2012-01-11 08:04:42 +08:00
int ep93xx_i2s_acquire(void);
EP93xx: Add i2s core support Add core support for EP93xx i2s audio Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-06-08 18:01:10 +08:00
void ep93xx_i2s_release(void);
ARM: ep93xx: add AC97 platform support Add platform support for the EP93xx AC97 controller driver. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-14 22:49:07 +08:00
void ep93xx_register_ac97(void);
[ARM] 5577/2: ep93xx: syscon locked register functions Add core functions to handle writes to the ep93xx software locked registers. There are a number of registers in the EP93xx System Controller that require a write to the software lock register before they can be updated. This patch adds a number of exported functions to the ep93xx core that handle this access. The software locked clock divider registers, VidClkDiv, MIRClkDiv, I2SClkDiv and KeyTchClkDiv would typically involve writing a specific value to the register. To support this the ep93xx_syscon_swlocked_write() function is provided. For the DeviceCfg register it's more typical to only need to set or clear a single bit. A generic ep93xx_devcfg_set_clear() function is provided to handle both operations. Two inline functions, ep93xx_devcfg_set_bits() and ep93xx_devcfg_clear_bits() are also provided to improve code readability. In addition, the remaining bits in the System Controller Device Config Register have been documented and the previously defined names shortened. All code paths that use this functionality have been updated except for arch/arm/kernel/crunch.c. That code is in a context switch path, which is not reentrant, so it is safe against itself. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-08 09:00:49 +08:00
[ARM] 5273/2: ep93xx: move ethernet support into core.c All EP93xx based systems can support Ethernet. This patch moves the platform_device setup from the various board support files into the core support file. The Ethernet driver data still remains in the individual platform setup files to allow specific platform configuration. This also adds Ethernet support to the edb9302, edb9312, and edb9315 platforms. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-05 03:01:49 +08:00
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 01:10:13 +08:00
ARM: restart: ep93xx: use new restart hook Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-05 17:54:14 +08:00
void ep93xx_restart(char, const char *);
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 01:10:13 +08:00
#endif
Copy Permalink