renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 06:04:14 +08:00
Code
3009adf5ac
linux-next/drivers/net/usb/Makefile

32 lines
1.1 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# Makefile for USB Network drivers
#
obj-$(CONFIG_USB_CATC) += catc.o
obj-$(CONFIG_USB_KAWETH) += kaweth.o
obj-$(CONFIG_USB_PEGASUS) += pegasus.o
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
HSO: add option hso driver This driver is for a number of different Option devices. Originally written by Option and Andrew Bird, but cleaned up massivly for acceptance into mainline by me and others. Many thanks to the following for their help in cleaning up the driver by providing feedback and patches to it: - Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - Oliver Neukum <oliver@neukum.org> - Alan Cox <alan@lxorguk.ukuu.org.uk> - Javier Marcet <javier@krausbeck.org> Cc: Andrew Bird <ajb@spheresystems.co.uk> Cc: Javier Marcet <javier@krausbeck.org> Cc: Filip Aben <f.aben@option.com> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-14 12:57:12 +08:00
obj-$(CONFIG_USB_HSO) += hso.o
[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters This patch moves the ASIX AX8817x driver into its own file, just using the "usbnet" infrastructure as a utility library. - As with "cdc_subset" this involved minor Kconfig/kbuild tweaks, moving code from one file to another, and exporting a few functions. - This includes updates from Jamie Painter to add (and use) a new hook to handle the different maximum transfer sizes for rx and tx sides. - Also from Jamie, some bugfixes: * MDIO byteorder (to address some PPC media negotiation problems); * Force alignment at key spots when using ax88772 framing (on some embedded hardware, the network stack will break otherwise); * Address some link reset problems. It also makes this driver use the standard (5 seconds vs half second) control timeouts used elsewhere in USB; and wraps a few lines before the 80th column (which previously needed it). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-01 00:53:10 +08:00
obj-$(CONFIG_USB_NET_AX8817X) += asix.o
[PATCH] USB: usbnet (7/9) module for CDC Ethernet Makes the CDC Ethernet support live in a separate driver module. This module is a bit special since it exports utility functions that are reused by the the Zaurus and RNDIS drivers, but it's not "core" like usbnet itself. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-01 00:54:20 +08:00
obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
usbnet: CDC EEM support (v5) This introduces a CDC Ethernet Emulation Model (EEM) host side driver to support USB EEM devices. EEM is different from the Ethernet Control Model (ECM) currently supported by the "CDC Ethernet" driver. One key difference is that it doesn't require of USB interface alternate settings to manage interface state; some maldesigned hardware can't handle that part of USB. It also avoids a separate USB interface for control and status updates. [ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet checks, improve fault handling, EEM conformance updates, cleanup ] Signed-off-by: Omar Laazimani <omar.oberthur@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-05 03:01:43 +08:00
obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
USB: Davicom DM9601 usbnet driver This patch adds a driver for the Davicom DM9601 USB 1.1 10/100Mbps ethernet adaptor using the usbnet framework. See http://www.davicom.com.tw/eng/products/dm9601.htm for details. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17 00:03:54 +08:00
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver This patch adds a driver for SMSC's LAN7500 family of USB 2.0 to gigabit ethernet adapters. It's loosely based on the smsc95xx driver but the device registers for LAN7500 are completely different. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 16:46:46 +08:00
obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o
net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver Attached is a driver for SMSC's LAN9500 USB2.0 10/100 ethernet adapter. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-02 13:27:57 +08:00
obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
[PATCH] USB: usbnet (5/9) module for genesys gl620a cables This moves the GeneSys GL620USB-A support into its own driver file. It also fixes a "return wrong skb" glitch in the rx unbatching, as recently reported, and adds some missing byteswaps in the special "genelink" headers (so it might now work on big-endian Linux). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-01 00:53:42 +08:00
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
[PATCH] USB: usbnet (4/9) module for net1080 cables As with the "cdc_subset" and "asix" drivers, this just moves the net1080 support into its one driver module. In this case there's a small bit of extra cleanup involved, moving some funky framing logic into the tx_fixup() routine (resolving a long overdue FIXME). Minor historical note: "usbnet" started out as "net1080", then got generalized to make it easier for other network drivers to reuse the urb queueing and fault management code here. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-01 00:53:26 +08:00
obj-$(CONFIG_USB_NET_NET1080) += net1080.o
[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables This wraps up the conversion of the "usbnet" driver structure, by moving the Prolific PL-2201/2302 minidriver to a module of its own. It also includes some minor cleanups to the remaining "usbnet" file, notably removing that long changelog at the top. Minor historical note: Linux 2.2 first called the driver for this hardware "plusb". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-01 00:54:50 +08:00
obj-$(CONFIG_USB_NET_PLUSB) += plusb.o
[PATCH] USB: usbnet (8/9) module for RNDIS devices This adds host-side RNDIS support to the "usbnet" driver, so Linux can talk to various devices (often based on WinCE) that otherwise only Windows could talk to. Tested with little-endian Linux talking to a Linux-USB Ethernet/RNDIS based peripheral. This also includes updates from Eddie C. Dost <ecd@brainaid.de> for big-endian SPARC Linux talking to a Nokia 9500 Communicator. It's still marked as EXPERIMENTAL because this code is so young. This ought to let Linux to work with various cable modems that previously would have been "Windows Only". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-01 00:54:36 +08:00
obj-$(CONFIG_USB_NET_RNDIS_HOST) += rndis_host.o
[PATCH] USB: usbnet (2/9) module for simple network links This patch creates the first of several separate "minidriver" modules for "usbnet". This one handles only the very simplest hardware, which can be handled almost entirely by the "usbnet" core. - Move device-specific bits into new "cdc_subset.c" driver, shrinking "usbnet" by a bunch; - Export the functions needed to support this minidriver (with EXPORT_SYMBOL_GPL); - Update Kconfig and kbuild accordingly. This one handles about a dozen different device types, with the most notable ones being Gumstix and most Linux-based PDAs (except Zaurus running that ancient code from Sharp). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-01 00:52:45 +08:00
obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o
[PATCH] USB: usbnet (6/9) module for Zaurii and compatibles This moves usbnet support for Zaurus and compatibles into its own module. Other than exporting a couple of helper functions, this just involved shuffling some code and updating the comments. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-01 00:53:58 +08:00
obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o
USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter This driver adds support for the DeLOCK USB ethernet adapter and potentially others based on the MosChip MCS7830 chip. It is based on the usbnet and asix drivers as well as the original device driver provided by MosChip, which in turn was based on the usbnet driver. It has been tested successfully on an OHCI, but interestingly there seems to be a problem with the mcs7830 when connected to the ICH6/EHCI in my thinkpad: it keeps receiving lots of broken packets in the RX interrupt. The problem goes away when I'm using an active USB hub, so I assume it's not related to the device driver, but rather to the hardware. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-09 06:08:00 +08:00
obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_USBNET) += usbnet.o
usb driver for intellon int51x1 based PLC like devolo dlan duo usb driver for intellon int51x1 based PLC like devolo dlan duo with improvements suggested by the guys of the mailinglist: - name and prefix with int51x1 (Florian Fainelli) - use conversion functions cpu_to_le16 / le16_to_cpu (Oliver Neukum) - use pskb_may_pull instead of skb->len (Ilpo Järvinen) - better code in tx_fixup (Ilpo Järvinen) - use gotos for error handling (Ilpo Järvinen) - better description (Jon Smirl) Signed-off-by: Peter Holik <peter@holik.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-18 15:24:21 +08:00
obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o
USB host CDC Phonet network interface driver Many Nokia handsets support a Phonet interface to the cellular modem via a vendor-specific USB interface. CDC Phonet follows the Communications Device Class model, with one control interface, and and a pair of inactive and active data alternative interface. The later has two bulk endpoint, one per direction. This was tested against Nokia E61, Nokia N95, and the existing Phonet gadget function for the Linux composite USB gadget framework. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-21 09:58:35 +08:00
obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o
drivers/net/usb: Add new driver ipheth Add new driver to use tethering with an iPhone device. After initial submission, apply fixes to fit the new driver into the kernel standards. There are still a couple of minor (almost cosmetic-level) issues, but the driver is fully functional right now. Signed-off-by: L. Alberto Giménez <agimenez@sysvalve.es> Signed-off-by: Diego Giagio <diego@giagio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-18 16:35:16 +08:00
obj-$(CONFIG_USB_IPHETH) += ipheth.o
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o
introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driver This patch introduces cx82310_eth driver - driver for USB ethernet port of ADSL routers based on Conexant CX82310 chips. Such routers usually have ethernet port(s) too which are bridged together with the USB ethernet port, allowing the USB-connected machine to communicate to the network (and also internet through the ADSL, of course). This is my first driver, so please check thoroughly. As there's no protocol documentation, it was done with usbsnoop dumps from Windows driver, some parts (the commands) inspired by cxacru driver and also other usbnet drivers. The driver passed my testing - some real work and also pings sized from 0 to 65507 B. The only problem I found is the ifconfig error counter. When I return 0 (or 1 but empty skb) from rx_fixup(), usbnet increases the error counter although it's not an error condition (because packets can cross URB boundaries). Maybe the usbnet should be fixed to allow rx_fixup() to return empty skbs (or some other value, e.g. 2)? The USB ID of my device is 0x0572:0xcb01 which conflicts with some ADSL modems using cxacru driver (they probably use the same chipset but simpler firmware). The modems seem to use bDeviceClass 0 and iProduct "ADSL USB MODEM", my router uses bDeviceClass 255 and iProduct "USB NET CARD". The driver matches only devices with class 255 and checks for the iProduct string during init. I already posted a patch for the cxacru driver to ignore these devices. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-04 10:39:34 +08:00
obj-$(CONFIG_USB_NET_CX82310_ETH) += cx82310_eth.o
USB CDC NCM host driver The patch provides USB CDC NCM host driver support in the Linux Kernel. Changes: drivers/net/usb/cdc_ncm.c: - initial submission of the CDC NCM host driver; - verified on Intel 32/64 bit, Intel Atom, ST-Ericsson U8500 (ARM) - throughput measured over 100 Mbits duplex; - driver supports 16-bit NTB format only, but it is more than enough for transfers up to 64K; - driver can handle up to 32 datagrams in received NTB; - timer is used to collect several packets in Tx direction drivers/net/usb/Kconfig: - a new entry to compile CDC NCM host driver drivers/net/usb/Makefile: - a new entry to compile CDC NCM host driver Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-30 07:23:28 +08:00
obj-$(CONFIG_USB_NET_CDC_NCM) += cdc_ncm.o
net/usb: Ethernet quirks for the LG-VL600 4G modem This adds a driver for the CDC Ethernet part of this modem. The device's ID is blacklisted in cdc_ether.c and is white-listed in this new driver because of the quirks needed to make it useful. The modem's firmware exposes a CDC ACM port for modem control and a CDC Ethernet port for network data. The descriptors look fine but both ports actually are some sort of multiplexers requiring non- standard headers added/removed from every packet or they get ignored. All information is based on a usb traffic log from a Windows machine. On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps. Userspace scripts are required to talk to the CDC ACM port. Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-28 20:56:33 +08:00
obj-$(CONFIG_USB_VL600) += lg-vl600.o
[PATCH] USB: move CONFIG_USB_DEBUG checks into the Makefile This lets us remove a lot of code in the drivers that were all checking the same thing. It also found some bugs in a few of the drivers, which has been fixed up. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-18 01:48:09 +08:00
Copy Permalink