2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
linux-next/net/tipc/msg.c

575 lines
15 KiB
C
Raw Normal View History

/*
* net/tipc/msg.c: TIPC message header routines
*
* Copyright (c) 2000-2006, 2014-2015, Ericsson AB
* Copyright (c) 2005, 2010-2011, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <net/sock.h>
#include "core.h"
#include "msg.h"
#include "addr.h"
#include "name_table.h"
#define MAX_FORWARD_SIZE 1024
static unsigned int align(unsigned int i)
{
return (i + 3) & ~3u;
}
/**
* tipc_buf_acquire - creates a TIPC message buffer
* @size: message size (including TIPC header)
*
* Returns a new buffer with data pointers set to the specified size.
*
* NOTE: Headroom is reserved to allow prepending of a data link header.
* There may also be unrequested tailroom present at the buffer's end.
*/
struct sk_buff *tipc_buf_acquire(u32 size)
{
struct sk_buff *skb;
unsigned int buf_size = (BUF_HEADROOM + size + 3) & ~3u;
skb = alloc_skb_fclone(buf_size, GFP_ATOMIC);
if (skb) {
skb_reserve(skb, BUF_HEADROOM);
skb_put(skb, size);
skb->next = NULL;
}
return skb;
}
2015-02-05 21:36:36 +08:00
void tipc_msg_init(u32 own_node, struct tipc_msg *m, u32 user, u32 type,
u32 hsize, u32 dnode)
{
memset(m, 0, hsize);
msg_set_version(m);
msg_set_user(m, user);
msg_set_hdr_sz(m, hsize);
msg_set_size(m, hsize);
2015-02-05 21:36:36 +08:00
msg_set_prevnode(m, own_node);
msg_set_type(m, type);
if (hsize > SHORT_H_SIZE) {
2015-02-05 21:36:36 +08:00
msg_set_orignode(m, own_node);
msg_set_destnode(m, dnode);
}
}
2015-02-05 21:36:36 +08:00
struct sk_buff *tipc_msg_create(uint user, uint type,
uint hdr_sz, uint data_sz, u32 dnode,
u32 onode, u32 dport, u32 oport, int errcode)
{
struct tipc_msg *msg;
struct sk_buff *buf;
buf = tipc_buf_acquire(hdr_sz + data_sz);
if (unlikely(!buf))
return NULL;
msg = buf_msg(buf);
2015-02-05 21:36:36 +08:00
tipc_msg_init(onode, msg, user, type, hdr_sz, dnode);
msg_set_size(msg, hdr_sz + data_sz);
msg_set_origport(msg, oport);
msg_set_destport(msg, dport);
msg_set_errcode(msg, errcode);
if (hdr_sz > SHORT_H_SIZE) {
msg_set_orignode(msg, onode);
msg_set_destnode(msg, dnode);
}
return buf;
}
/* tipc_buf_append(): Append a buffer to the fragment list of another buffer
* @*headbuf: in: NULL for first frag, otherwise value returned from prev call
* out: set when successful non-complete reassembly, otherwise NULL
* @*buf: in: the buffer to append. Always defined
* out: head buf after successful complete reassembly, otherwise NULL
* Returns 1 when reassembly complete, otherwise 0
*/
int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf)
{
struct sk_buff *head = *headbuf;
struct sk_buff *frag = *buf;
struct sk_buff *tail;
struct tipc_msg *msg;
u32 fragid;
int delta;
bool headstolen;
if (!frag)
goto err;
msg = buf_msg(frag);
fragid = msg_type(msg);
frag->next = NULL;
skb_pull(frag, msg_hdr_sz(msg));
if (fragid == FIRST_FRAGMENT) {
if (unlikely(head))
goto err;
if (unlikely(skb_unclone(frag, GFP_ATOMIC)))
goto err;
head = *headbuf = frag;
skb_frag_list_init(head);
TIPC_SKB_CB(head)->tail = NULL;
*buf = NULL;
return 0;
}
if (!head)
goto err;
if (skb_try_coalesce(head, frag, &headstolen, &delta)) {
kfree_skb_partial(frag, headstolen);
} else {
tail = TIPC_SKB_CB(head)->tail;
if (!skb_has_frag_list(head))
skb_shinfo(head)->frag_list = frag;
else
tail->next = frag;
head->truesize += frag->truesize;
head->data_len += frag->len;
head->len += frag->len;
TIPC_SKB_CB(head)->tail = frag;
}
if (fragid == LAST_FRAGMENT) {
TIPC_SKB_CB(head)->validated = false;
if (unlikely(!tipc_msg_validate(head)))
goto err;
*buf = head;
TIPC_SKB_CB(head)->tail = NULL;
*headbuf = NULL;
return 1;
}
*buf = NULL;
return 0;
err:
pr_warn_ratelimited("Unable to build fragment list\n");
kfree_skb(*buf);
kfree_skb(*headbuf);
*buf = *headbuf = NULL;
return 0;
}
/* tipc_msg_validate - validate basic format of received message
*
* This routine ensures a TIPC message has an acceptable header, and at least
* as much data as the header indicates it should. The routine also ensures
* that the entire message header is stored in the main fragment of the message
* buffer, to simplify future access to message header fields.
*
* Note: Having extra info present in the message header or data areas is OK.
* TIPC will ignore the excess, under the assumption that it is optional info
* introduced by a later release of the protocol.
*/
bool tipc_msg_validate(struct sk_buff *skb)
{
struct tipc_msg *msg;
int msz, hsz;
if (unlikely(TIPC_SKB_CB(skb)->validated))
return true;
if (unlikely(!pskb_may_pull(skb, MIN_H_SIZE)))
return false;
hsz = msg_hdr_sz(buf_msg(skb));
if (unlikely(hsz < MIN_H_SIZE) || (hsz > MAX_H_SIZE))
return false;
if (unlikely(!pskb_may_pull(skb, hsz)))
return false;
msg = buf_msg(skb);
if (unlikely(msg_version(msg) != TIPC_VERSION))
return false;
msz = msg_size(msg);
if (unlikely(msz < hsz))
return false;
if (unlikely((msz - hsz) > TIPC_MAX_USER_MSG_SIZE))
return false;
if (unlikely(skb->len < msz))
return false;
TIPC_SKB_CB(skb)->validated = true;
return true;
}
/**
* tipc_msg_build - create buffer chain containing specified header and data
* @mhdr: Message header, to be prepended to data
* @m: User message
* @dsz: Total length of user data
* @pktmax: Max packet size that can be used
* @list: Buffer or chain of buffers to be returned to caller
*
* Returns message data size or errno: -ENOMEM, -EFAULT
*/
2015-02-05 21:36:36 +08:00
int tipc_msg_build(struct tipc_msg *mhdr, struct msghdr *m,
int offset, int dsz, int pktmax, struct sk_buff_head *list)
{
int mhsz = msg_hdr_sz(mhdr);
int msz = mhsz + dsz;
int pktno = 1;
int pktsz;
int pktrem = pktmax;
int drem = dsz;
struct tipc_msg pkthdr;
struct sk_buff *skb;
char *pktpos;
int rc;
msg_set_size(mhdr, msz);
/* No fragmentation needed? */
if (likely(msz <= pktmax)) {
skb = tipc_buf_acquire(msz);
if (unlikely(!skb))
return -ENOMEM;
skb_orphan(skb);
__skb_queue_tail(list, skb);
skb_copy_to_linear_data(skb, mhdr, mhsz);
pktpos = skb->data + mhsz;
if (copy_from_iter(pktpos, dsz, &m->msg_iter) == dsz)
return dsz;
rc = -EFAULT;
goto error;
}
/* Prepare reusable fragment header */
2015-02-05 21:36:36 +08:00
tipc_msg_init(msg_prevnode(mhdr), &pkthdr, MSG_FRAGMENTER,
FIRST_FRAGMENT, INT_H_SIZE, msg_destnode(mhdr));
msg_set_size(&pkthdr, pktmax);
msg_set_fragm_no(&pkthdr, pktno);
tipc: clean up handling of message priorities Messages transferred by TIPC are assigned an "importance priority", -an integer value indicating how to treat the message when there is link or destination socket congestion. There is no separate header field for this value. Instead, the message user values have been chosen in ascending order according to perceived importance, so that the message user field can be used for this. This is not a good solution. First, we have many more users than the needed priority levels, so we end up with treating more priority levels than necessary. Second, the user field cannot always accurately reflect the priority of the message. E.g., a message fragment packet should really have the priority of the enveloped user data message, and not the priority of the MSG_FRAGMENTER user. Until now, we have been working around this problem in different ways, but it is now time to implement a consistent way of handling such priorities, although still within the constraint that we cannot allocate any more bits in the regular data message header for this. In this commit, we define a new priority level, TIPC_SYSTEM_IMPORTANCE, that will be the only one used apart from the four (lower) user data levels. All non-data messages map down to this priority. Furthermore, we take some free bits from the MSG_FRAGMENTER header and allocate them to store the priority of the enveloped message. We then adjust the functions msg_importance()/msg_set_importance() so that they read/set the correct header fields depending on user type. This small protocol change is fully compatible, because the code at the receiving end of a link currently reads the importance level only from user data messages, where there is no change. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14 04:08:11 +08:00
msg_set_importance(&pkthdr, msg_importance(mhdr));
/* Prepare first fragment */
skb = tipc_buf_acquire(pktmax);
if (!skb)
return -ENOMEM;
skb_orphan(skb);
__skb_queue_tail(list, skb);
pktpos = skb->data;
skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE);
pktpos += INT_H_SIZE;
pktrem -= INT_H_SIZE;
skb_copy_to_linear_data_offset(skb, INT_H_SIZE, mhdr, mhsz);
pktpos += mhsz;
pktrem -= mhsz;
do {
if (drem < pktrem)
pktrem = drem;
if (copy_from_iter(pktpos, pktrem, &m->msg_iter) != pktrem) {
rc = -EFAULT;
goto error;
}
drem -= pktrem;
if (!drem)
break;
/* Prepare new fragment: */
if (drem < (pktmax - INT_H_SIZE))
pktsz = drem + INT_H_SIZE;
else
pktsz = pktmax;
skb = tipc_buf_acquire(pktsz);
if (!skb) {
rc = -ENOMEM;
goto error;
}
skb_orphan(skb);
__skb_queue_tail(list, skb);
msg_set_type(&pkthdr, FRAGMENT);
msg_set_size(&pkthdr, pktsz);
msg_set_fragm_no(&pkthdr, ++pktno);
skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE);
pktpos = skb->data + INT_H_SIZE;
pktrem = pktsz - INT_H_SIZE;
} while (1);
msg_set_type(buf_msg(skb), LAST_FRAGMENT);
return dsz;
error:
__skb_queue_purge(list);
__skb_queue_head_init(list);
return rc;
}
/**
* tipc_msg_bundle(): Append contents of a buffer to tail of an existing one
* @bskb: the buffer to append to ("bundle")
* @skb: buffer to be appended
* @mtu: max allowable size for the bundle buffer
* Consumes buffer if successful
* Returns true if bundling could be performed, otherwise false
*/
bool tipc_msg_bundle(struct sk_buff *bskb, struct sk_buff *skb, u32 mtu)
{
struct tipc_msg *bmsg;
struct tipc_msg *msg = buf_msg(skb);
unsigned int bsz;
unsigned int msz = msg_size(msg);
u32 start, pad;
u32 max = mtu - INT_H_SIZE;
if (likely(msg_user(msg) == MSG_FRAGMENTER))
return false;
if (!bskb)
return false;
bmsg = buf_msg(bskb);
bsz = msg_size(bmsg);
start = align(bsz);
pad = start - bsz;
if (unlikely(msg_user(msg) == CHANGEOVER_PROTOCOL))
return false;
if (unlikely(msg_user(msg) == BCAST_PROTOCOL))
return false;
if (likely(msg_user(bmsg) != MSG_BUNDLER))
return false;
if (unlikely(skb_tailroom(bskb) < (pad + msz)))
return false;
if (unlikely(max < (start + msz)))
return false;
skb_put(bskb, pad + msz);
skb_copy_to_linear_data_offset(bskb, start, skb->data, msz);
msg_set_size(bmsg, start + msz);
msg_set_msgcnt(bmsg, msg_msgcnt(bmsg) + 1);
kfree_skb(skb);
return true;
}
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 21:36:41 +08:00
/**
* tipc_msg_extract(): extract bundled inner packet from buffer
* @skb: buffer to be extracted from.
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 21:36:41 +08:00
* @iskb: extracted inner buffer, to be returned
* @pos: position in outer message of msg to be extracted.
* Returns position of next msg
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 21:36:41 +08:00
* Consumes outer buffer when last packet extracted
* Returns true when when there is an extracted buffer, otherwise false
*/
bool tipc_msg_extract(struct sk_buff *skb, struct sk_buff **iskb, int *pos)
{
struct tipc_msg *msg;
int imsz, offset;
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 21:36:41 +08:00
*iskb = NULL;
if (unlikely(skb_linearize(skb)))
goto none;
msg = buf_msg(skb);
offset = msg_hdr_sz(msg) + *pos;
if (unlikely(offset > (msg_size(msg) - MIN_H_SIZE)))
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 21:36:41 +08:00
goto none;
*iskb = skb_clone(skb, GFP_ATOMIC);
if (unlikely(!*iskb))
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 21:36:41 +08:00
goto none;
skb_pull(*iskb, offset);
imsz = msg_size(buf_msg(*iskb));
skb_trim(*iskb, imsz);
if (unlikely(!tipc_msg_validate(*iskb)))
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 21:36:41 +08:00
goto none;
*pos += align(imsz);
return true;
none:
kfree_skb(skb);
kfree_skb(*iskb);
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 21:36:41 +08:00
*iskb = NULL;
return false;
}
/**
* tipc_msg_make_bundle(): Create bundle buf and append message to its tail
* @list: the buffer chain
* @skb: buffer to be appended and replaced
* @mtu: max allowable size for the bundle buffer, inclusive header
* @dnode: destination node for message. (Not always present in header)
* Replaces buffer if successful
* Returns true if success, otherwise false
*/
bool tipc_msg_make_bundle(struct sk_buff **skb, u32 mtu, u32 dnode)
{
struct sk_buff *bskb;
struct tipc_msg *bmsg;
struct tipc_msg *msg = buf_msg(*skb);
u32 msz = msg_size(msg);
u32 max = mtu - INT_H_SIZE;
if (msg_user(msg) == MSG_FRAGMENTER)
return false;
if (msg_user(msg) == CHANGEOVER_PROTOCOL)
return false;
if (msg_user(msg) == BCAST_PROTOCOL)
return false;
if (msz > (max / 2))
return false;
bskb = tipc_buf_acquire(max);
if (!bskb)
return false;
skb_trim(bskb, INT_H_SIZE);
bmsg = buf_msg(bskb);
2015-02-05 21:36:36 +08:00
tipc_msg_init(msg_prevnode(msg), bmsg, MSG_BUNDLER, 0,
INT_H_SIZE, dnode);
msg_set_seqno(bmsg, msg_seqno(msg));
msg_set_ack(bmsg, msg_ack(msg));
msg_set_bcast_ack(bmsg, msg_bcast_ack(msg));
tipc_msg_bundle(bskb, *skb, mtu);
*skb = bskb;
return true;
}
/**
* tipc_msg_reverse(): swap source and destination addresses and add error code
* @buf: buffer containing message to be reversed
* @dnode: return value: node where to send message after reversal
* @err: error code to be set in message
* Consumes buffer if failure
* Returns true if success, otherwise false
*/
2015-02-05 21:36:36 +08:00
bool tipc_msg_reverse(u32 own_addr, struct sk_buff *buf, u32 *dnode,
int err)
{
struct tipc_msg *msg = buf_msg(buf);
struct tipc_msg ohdr;
uint rdsz = min_t(uint, msg_data_sz(msg), MAX_FORWARD_SIZE);
if (skb_linearize(buf))
goto exit;
msg = buf_msg(buf);
if (msg_dest_droppable(msg))
goto exit;
if (msg_errcode(msg))
goto exit;
memcpy(&ohdr, msg, msg_hdr_sz(msg));
msg_set_errcode(msg, err);
msg_set_origport(msg, msg_destport(&ohdr));
msg_set_destport(msg, msg_origport(&ohdr));
2015-02-05 21:36:36 +08:00
msg_set_prevnode(msg, own_addr);
if (!msg_short(msg)) {
msg_set_orignode(msg, msg_destnode(&ohdr));
msg_set_destnode(msg, msg_orignode(&ohdr));
}
msg_set_size(msg, msg_hdr_sz(msg) + rdsz);
skb_trim(buf, msg_size(msg));
skb_orphan(buf);
*dnode = msg_orignode(&ohdr);
return true;
exit:
kfree_skb(buf);
*dnode = 0;
return false;
}
/**
* tipc_msg_lookup_dest(): try to find new destination for named message
* @skb: the buffer containing the message.
* @dnode: return value: next-hop node, if destination found
* @err: return value: error code to use, if message to be rejected
* Does not consume buffer
* Returns true if a destination is found, false otherwise
*/
bool tipc_msg_lookup_dest(struct net *net, struct sk_buff *skb,
u32 *dnode, int *err)
{
struct tipc_msg *msg = buf_msg(skb);
u32 dport;
u32 own_addr = tipc_own_addr(net);
if (!msg_isdata(msg))
return false;
if (!msg_named(msg))
return false;
if (msg_errcode(msg))
return false;
*err = -TIPC_ERR_NO_NAME;
if (skb_linearize(skb))
return false;
if (msg_reroute_cnt(msg))
return false;
*dnode = addr_domain(net, msg_lookup_scope(msg));
dport = tipc_nametbl_translate(net, msg_nametype(msg),
msg_nameinst(msg), dnode);
if (!dport)
return false;
msg_incr_reroute_cnt(msg);
if (*dnode != own_addr)
msg_set_prevnode(msg, own_addr);
msg_set_destnode(msg, *dnode);
msg_set_destport(msg, dport);
*err = TIPC_OK;
return true;
}
/* tipc_msg_reassemble() - clone a buffer chain of fragments and
* reassemble the clones into one message
*/
struct sk_buff *tipc_msg_reassemble(struct sk_buff_head *list)
{
struct sk_buff *skb;
struct sk_buff *frag = NULL;
struct sk_buff *head = NULL;
int hdr_sz;
/* Copy header if single buffer */
if (skb_queue_len(list) == 1) {
skb = skb_peek(list);
hdr_sz = skb_headroom(skb) + msg_hdr_sz(buf_msg(skb));
return __pskb_copy(skb, hdr_sz, GFP_ATOMIC);
}
/* Clone all fragments and reassemble */
skb_queue_walk(list, skb) {
frag = skb_clone(skb, GFP_ATOMIC);
if (!frag)
goto error;
frag->next = NULL;
if (tipc_buf_append(&head, &frag))
break;
if (!head)
goto error;
}
return frag;
error:
pr_warn("Failed do clone local mcast rcv buffer\n");
kfree_skb(head);
return NULL;
}