2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
linux-next/net/mac80211/chan.c

350 lines
8.3 KiB
C
Raw Normal View History

cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 21:25:02 +08:00
/*
* mac80211 - channel management
*/
#include <linux/nl80211.h>
#include <linux/export.h>
mac80211: Don't let regulatory make us deaf When regulatory information changes our HT behavior (e.g, when we get a country code from the AP we have just associated with), we should use this information to change the power with which we transmit, and what channels we transmit. Sometimes the channel parameters we derive from regulatory information contradicts the parameters we used in association. For example, we could have associated specifying HT40, but the regulatory rules we apply may forbid HT40 operation. In the situation above, we should reconfigure ourselves to transmit in HT20 only, however it makes no sense for us to disable receive in HT40, since if we associated with these parameters, the AP has every reason to expect we can and will receive packets this way. The code in mac80211 does not have the capability of sending the appropriate action frames to signal a change in HT behaviour so the AP has no clue we can no longer receive frames encoded this way. In some broken AP implementations, this can leave us effectively deaf if the AP never retries in lower HT rates. This change breaks up the channel_type parameter in the ieee80211_enable_ht function into a separate receive and transmit part. It honors the channel flags set by regulatory in order to configure the rate control algorithm, but uses the capability flags to configure the channel on the radio, since these were used in association to set the AP's transmit rate. Signed-off-by: Paul Stewart <pstew@chromium.org> Cc: Sam Leffler <sleffler@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R Rodriguez <mcgrof@frijolero.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13 22:46:18 +08:00
#include <net/cfg80211.h>
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 21:25:02 +08:00
#include "ieee80211_i.h"
#include "driver-ops.h"
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 21:25:02 +08:00
static void ieee80211_change_chandef(struct ieee80211_local *local,
struct ieee80211_chanctx *ctx,
const struct cfg80211_chan_def *chandef)
{
if (cfg80211_chandef_identical(&ctx->conf.def, chandef))
return;
WARN_ON(!cfg80211_chandef_compatible(&ctx->conf.def, chandef));
ctx->conf.def = *chandef;
drv_change_chanctx(local, ctx, IEEE80211_CHANCTX_CHANGE_WIDTH);
if (!local->use_chanctx) {
local->_oper_channel_type = cfg80211_get_chandef_type(chandef);
ieee80211_hw_config(local, 0);
}
}
static struct ieee80211_chanctx *
ieee80211_find_chanctx(struct ieee80211_local *local,
const struct cfg80211_chan_def *chandef,
enum ieee80211_chanctx_mode mode)
{
struct ieee80211_chanctx *ctx;
lockdep_assert_held(&local->chanctx_mtx);
if (mode == IEEE80211_CHANCTX_EXCLUSIVE)
return NULL;
list_for_each_entry(ctx, &local->chanctx_list, list) {
const struct cfg80211_chan_def *compat;
if (ctx->mode == IEEE80211_CHANCTX_EXCLUSIVE)
continue;
compat = cfg80211_chandef_compatible(&ctx->conf.def, chandef);
if (!compat)
continue;
ieee80211_change_chandef(local, ctx, compat);
return ctx;
}
return NULL;
}
static struct ieee80211_chanctx *
ieee80211_new_chanctx(struct ieee80211_local *local,
const struct cfg80211_chan_def *chandef,
enum ieee80211_chanctx_mode mode)
{
struct ieee80211_chanctx *ctx;
int err;
lockdep_assert_held(&local->chanctx_mtx);
ctx = kzalloc(sizeof(*ctx) + local->hw.chanctx_data_size, GFP_KERNEL);
if (!ctx)
return ERR_PTR(-ENOMEM);
ctx->conf.def = *chandef;
ctx->conf.rx_chains_static = 1;
ctx->conf.rx_chains_dynamic = 1;
ctx->mode = mode;
if (!local->use_chanctx) {
local->_oper_channel_type =
cfg80211_get_chandef_type(chandef);
local->_oper_channel = chandef->chan;
ieee80211_hw_config(local, 0);
} else {
err = drv_add_chanctx(local, ctx);
if (err) {
kfree(ctx);
return ERR_PTR(err);
}
}
list_add_rcu(&ctx->list, &local->chanctx_list);
return ctx;
}
static void ieee80211_free_chanctx(struct ieee80211_local *local,
struct ieee80211_chanctx *ctx)
{
lockdep_assert_held(&local->chanctx_mtx);
WARN_ON_ONCE(ctx->refcount != 0);
if (!local->use_chanctx) {
local->_oper_channel_type = NL80211_CHAN_NO_HT;
ieee80211_hw_config(local, 0);
} else {
drv_remove_chanctx(local, ctx);
}
list_del_rcu(&ctx->list);
kfree_rcu(ctx, rcu_head);
}
static int ieee80211_assign_vif_chanctx(struct ieee80211_sub_if_data *sdata,
struct ieee80211_chanctx *ctx)
{
struct ieee80211_local *local = sdata->local;
int ret;
lockdep_assert_held(&local->chanctx_mtx);
ret = drv_assign_vif_chanctx(local, sdata, ctx);
if (ret)
return ret;
rcu_assign_pointer(sdata->vif.chanctx_conf, &ctx->conf);
ctx->refcount++;
ieee80211_recalc_txpower(sdata);
return 0;
}
static void ieee80211_recalc_chanctx_chantype(struct ieee80211_local *local,
struct ieee80211_chanctx *ctx)
{
struct ieee80211_chanctx_conf *conf = &ctx->conf;
struct ieee80211_sub_if_data *sdata;
const struct cfg80211_chan_def *compat = NULL;
lockdep_assert_held(&local->chanctx_mtx);
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
if (rcu_access_pointer(sdata->vif.chanctx_conf) != conf)
continue;
if (!compat)
compat = &sdata->vif.bss_conf.chandef;
compat = cfg80211_chandef_compatible(
&sdata->vif.bss_conf.chandef, compat);
if (!compat)
break;
}
rcu_read_unlock();
if (WARN_ON_ONCE(!compat))
return;
ieee80211_change_chandef(local, ctx, compat);
}
static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata,
struct ieee80211_chanctx *ctx)
{
struct ieee80211_local *local = sdata->local;
lockdep_assert_held(&local->chanctx_mtx);
ctx->refcount--;
rcu_assign_pointer(sdata->vif.chanctx_conf, NULL);
drv_unassign_vif_chanctx(local, sdata, ctx);
if (ctx->refcount > 0) {
ieee80211_recalc_chanctx_chantype(sdata->local, ctx);
ieee80211_recalc_smps_chanctx(local, ctx);
}
}
static void __ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_chanctx_conf *conf;
struct ieee80211_chanctx *ctx;
lockdep_assert_held(&local->chanctx_mtx);
conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
lockdep_is_held(&local->chanctx_mtx));
if (!conf)
return;
ctx = container_of(conf, struct ieee80211_chanctx, conf);
ieee80211_unassign_vif_chanctx(sdata, ctx);
if (ctx->refcount == 0)
ieee80211_free_chanctx(local, ctx);
}
void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local,
struct ieee80211_chanctx *chanctx)
{
struct ieee80211_sub_if_data *sdata;
u8 rx_chains_static, rx_chains_dynamic;
lockdep_assert_held(&local->chanctx_mtx);
rx_chains_static = 1;
rx_chains_dynamic = 1;
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
u8 needed_static, needed_dynamic;
if (!ieee80211_sdata_running(sdata))
continue;
if (rcu_access_pointer(sdata->vif.chanctx_conf) !=
&chanctx->conf)
continue;
switch (sdata->vif.type) {
case NL80211_IFTYPE_P2P_DEVICE:
continue;
case NL80211_IFTYPE_STATION:
if (!sdata->u.mgd.associated)
continue;
break;
case NL80211_IFTYPE_AP_VLAN:
continue;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_MESH_POINT:
break;
default:
WARN_ON_ONCE(1);
}
switch (sdata->smps_mode) {
default:
WARN_ONCE(1, "Invalid SMPS mode %d\n",
sdata->smps_mode);
/* fall through */
case IEEE80211_SMPS_OFF:
needed_static = sdata->needed_rx_chains;
needed_dynamic = sdata->needed_rx_chains;
break;
case IEEE80211_SMPS_DYNAMIC:
needed_static = 1;
needed_dynamic = sdata->needed_rx_chains;
break;
case IEEE80211_SMPS_STATIC:
needed_static = 1;
needed_dynamic = 1;
break;
}
rx_chains_static = max(rx_chains_static, needed_static);
rx_chains_dynamic = max(rx_chains_dynamic, needed_dynamic);
}
rcu_read_unlock();
if (!local->use_chanctx) {
if (rx_chains_static > 1)
local->smps_mode = IEEE80211_SMPS_OFF;
else if (rx_chains_dynamic > 1)
local->smps_mode = IEEE80211_SMPS_DYNAMIC;
else
local->smps_mode = IEEE80211_SMPS_STATIC;
ieee80211_hw_config(local, 0);
}
if (rx_chains_static == chanctx->conf.rx_chains_static &&
rx_chains_dynamic == chanctx->conf.rx_chains_dynamic)
return;
chanctx->conf.rx_chains_static = rx_chains_static;
chanctx->conf.rx_chains_dynamic = rx_chains_dynamic;
drv_change_chanctx(local, chanctx, IEEE80211_CHANCTX_CHANGE_RX_CHAINS);
}
int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata,
const struct cfg80211_chan_def *chandef,
enum ieee80211_chanctx_mode mode)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_chanctx *ctx;
int ret;
WARN_ON(sdata->dev && netif_carrier_ok(sdata->dev));
mutex_lock(&local->chanctx_mtx);
__ieee80211_vif_release_channel(sdata);
ctx = ieee80211_find_chanctx(local, chandef, mode);
if (!ctx)
ctx = ieee80211_new_chanctx(local, chandef, mode);
if (IS_ERR(ctx)) {
ret = PTR_ERR(ctx);
goto out;
}
sdata->vif.bss_conf.chandef = *chandef;
ret = ieee80211_assign_vif_chanctx(sdata, ctx);
if (ret) {
/* if assign fails refcount stays the same */
if (ctx->refcount == 0)
ieee80211_free_chanctx(local, ctx);
goto out;
}
ieee80211_recalc_smps_chanctx(local, ctx);
out:
mutex_unlock(&local->chanctx_mtx);
return ret;
}
void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata)
{
WARN_ON(sdata->dev && netif_carrier_ok(sdata->dev));
mutex_lock(&sdata->local->chanctx_mtx);
__ieee80211_vif_release_channel(sdata);
mutex_unlock(&sdata->local->chanctx_mtx);
}
void ieee80211_iter_chan_contexts_atomic(
struct ieee80211_hw *hw,
void (*iter)(struct ieee80211_hw *hw,
struct ieee80211_chanctx_conf *chanctx_conf,
void *data),
void *iter_data)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_chanctx *ctx;
rcu_read_lock();
list_for_each_entry_rcu(ctx, &local->chanctx_list, list)
iter(hw, &ctx->conf, iter_data);
rcu_read_unlock();
}
EXPORT_SYMBOL_GPL(ieee80211_iter_chan_contexts_atomic);