2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
linux-next/drivers/mfd/intel_soc_pmic_bxtwc.c

618 lines
15 KiB
C
Raw Normal View History

/*
* MFD core driver for Intel Broxton Whiskey Cove PMIC
*
* Copyright (C) 2015 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/core.h>
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/mfd/intel_soc_pmic_bxtwc.h>
#include <asm/intel_pmc_ipc.h>
/* PMIC device registers */
#define REG_ADDR_MASK 0xFF00
#define REG_ADDR_SHIFT 8
#define REG_OFFSET_MASK 0xFF
/* Interrupt Status Registers */
#define BXTWC_IRQLVL1 0x4E02
#define BXTWC_PWRBTNIRQ 0x4E03
#define BXTWC_THRM0IRQ 0x4E04
#define BXTWC_THRM1IRQ 0x4E05
#define BXTWC_THRM2IRQ 0x4E06
#define BXTWC_BCUIRQ 0x4E07
#define BXTWC_ADCIRQ 0x4E08
#define BXTWC_CHGR0IRQ 0x4E09
#define BXTWC_CHGR1IRQ 0x4E0A
#define BXTWC_GPIOIRQ0 0x4E0B
#define BXTWC_GPIOIRQ1 0x4E0C
#define BXTWC_CRITIRQ 0x4E0D
#define BXTWC_TMUIRQ 0x4FB6
/* Interrupt MASK Registers */
#define BXTWC_MIRQLVL1 0x4E0E
#define BXTWC_MPWRTNIRQ 0x4E0F
#define BXTWC_MIRQLVL1_MCHGR BIT(5)
#define BXTWC_MTHRM0IRQ 0x4E12
#define BXTWC_MTHRM1IRQ 0x4E13
#define BXTWC_MTHRM2IRQ 0x4E14
#define BXTWC_MBCUIRQ 0x4E15
#define BXTWC_MADCIRQ 0x4E16
#define BXTWC_MCHGR0IRQ 0x4E17
#define BXTWC_MCHGR1IRQ 0x4E18
#define BXTWC_MGPIO0IRQ 0x4E19
#define BXTWC_MGPIO1IRQ 0x4E1A
#define BXTWC_MCRITIRQ 0x4E1B
#define BXTWC_MTMUIRQ 0x4FB7
/* Whiskey Cove PMIC share same ACPI ID between different platforms */
#define BROXTON_PMIC_WC_HRV 4
/* Manage in two IRQ chips since mask registers are not consecutive */
enum bxtwc_irqs {
/* Level 1 */
BXTWC_PWRBTN_LVL1_IRQ = 0,
BXTWC_TMU_LVL1_IRQ,
BXTWC_THRM_LVL1_IRQ,
BXTWC_BCU_LVL1_IRQ,
BXTWC_ADC_LVL1_IRQ,
BXTWC_CHGR_LVL1_IRQ,
BXTWC_GPIO_LVL1_IRQ,
BXTWC_CRIT_LVL1_IRQ,
/* Level 2 */
BXTWC_PWRBTN_IRQ,
};
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
enum bxtwc_irqs_bcu {
BXTWC_BCU_IRQ = 0,
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
};
enum bxtwc_irqs_adc {
BXTWC_ADC_IRQ = 0,
};
enum bxtwc_irqs_chgr {
BXTWC_USBC_IRQ = 0,
BXTWC_CHGR0_IRQ,
BXTWC_CHGR1_IRQ,
};
enum bxtwc_irqs_tmu {
BXTWC_TMU_IRQ = 0,
};
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
enum bxtwc_irqs_crit {
BXTWC_CRIT_IRQ = 0,
};
static const struct regmap_irq bxtwc_regmap_irqs[] = {
REGMAP_IRQ_REG(BXTWC_PWRBTN_LVL1_IRQ, 0, BIT(0)),
REGMAP_IRQ_REG(BXTWC_TMU_LVL1_IRQ, 0, BIT(1)),
REGMAP_IRQ_REG(BXTWC_THRM_LVL1_IRQ, 0, BIT(2)),
REGMAP_IRQ_REG(BXTWC_BCU_LVL1_IRQ, 0, BIT(3)),
REGMAP_IRQ_REG(BXTWC_ADC_LVL1_IRQ, 0, BIT(4)),
REGMAP_IRQ_REG(BXTWC_CHGR_LVL1_IRQ, 0, BIT(5)),
REGMAP_IRQ_REG(BXTWC_GPIO_LVL1_IRQ, 0, BIT(6)),
REGMAP_IRQ_REG(BXTWC_CRIT_LVL1_IRQ, 0, BIT(7)),
REGMAP_IRQ_REG(BXTWC_PWRBTN_IRQ, 1, 0x03),
};
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
static const struct regmap_irq bxtwc_regmap_irqs_bcu[] = {
REGMAP_IRQ_REG(BXTWC_BCU_IRQ, 0, 0x1f),
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
};
static const struct regmap_irq bxtwc_regmap_irqs_adc[] = {
REGMAP_IRQ_REG(BXTWC_ADC_IRQ, 0, 0xff),
};
static const struct regmap_irq bxtwc_regmap_irqs_chgr[] = {
REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 0, BIT(5)),
REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 0, 0x1f),
REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 1, 0x1f),
};
static const struct regmap_irq bxtwc_regmap_irqs_tmu[] = {
REGMAP_IRQ_REG(BXTWC_TMU_IRQ, 0, 0x06),
};
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
static const struct regmap_irq bxtwc_regmap_irqs_crit[] = {
REGMAP_IRQ_REG(BXTWC_CRIT_IRQ, 0, 0x03),
};
static struct regmap_irq_chip bxtwc_regmap_irq_chip = {
.name = "bxtwc_irq_chip",
.status_base = BXTWC_IRQLVL1,
.mask_base = BXTWC_MIRQLVL1,
.irqs = bxtwc_regmap_irqs,
.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs),
.num_regs = 2,
};
static struct regmap_irq_chip bxtwc_regmap_irq_chip_tmu = {
.name = "bxtwc_irq_chip_tmu",
.status_base = BXTWC_TMUIRQ,
.mask_base = BXTWC_MTMUIRQ,
.irqs = bxtwc_regmap_irqs_tmu,
.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_tmu),
.num_regs = 1,
};
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
static struct regmap_irq_chip bxtwc_regmap_irq_chip_bcu = {
.name = "bxtwc_irq_chip_bcu",
.status_base = BXTWC_BCUIRQ,
.mask_base = BXTWC_MBCUIRQ,
.irqs = bxtwc_regmap_irqs_bcu,
.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_bcu),
.num_regs = 1,
};
static struct regmap_irq_chip bxtwc_regmap_irq_chip_adc = {
.name = "bxtwc_irq_chip_adc",
.status_base = BXTWC_ADCIRQ,
.mask_base = BXTWC_MADCIRQ,
.irqs = bxtwc_regmap_irqs_adc,
.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_adc),
.num_regs = 1,
};
static struct regmap_irq_chip bxtwc_regmap_irq_chip_chgr = {
.name = "bxtwc_irq_chip_chgr",
.status_base = BXTWC_CHGR0IRQ,
.mask_base = BXTWC_MCHGR0IRQ,
.irqs = bxtwc_regmap_irqs_chgr,
.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_chgr),
.num_regs = 2,
};
static struct regmap_irq_chip bxtwc_regmap_irq_chip_crit = {
.name = "bxtwc_irq_chip_crit",
.status_base = BXTWC_CRITIRQ,
.mask_base = BXTWC_MCRITIRQ,
.irqs = bxtwc_regmap_irqs_crit,
.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_crit),
.num_regs = 1,
};
static struct resource gpio_resources[] = {
DEFINE_RES_IRQ_NAMED(BXTWC_GPIO_LVL1_IRQ, "GPIO"),
};
static struct resource adc_resources[] = {
DEFINE_RES_IRQ_NAMED(BXTWC_ADC_IRQ, "ADC"),
};
static struct resource usbc_resources[] = {
DEFINE_RES_IRQ(BXTWC_USBC_IRQ),
};
static struct resource charger_resources[] = {
DEFINE_RES_IRQ_NAMED(BXTWC_CHGR0_IRQ, "CHARGER"),
DEFINE_RES_IRQ_NAMED(BXTWC_CHGR1_IRQ, "CHARGER1"),
};
static struct resource thermal_resources[] = {
DEFINE_RES_IRQ(BXTWC_THRM_LVL1_IRQ),
};
static struct resource bcu_resources[] = {
DEFINE_RES_IRQ_NAMED(BXTWC_BCU_IRQ, "BCU"),
};
static struct resource tmu_resources[] = {
DEFINE_RES_IRQ_NAMED(BXTWC_TMU_IRQ, "TMU"),
};
static struct mfd_cell bxt_wc_dev[] = {
{
.name = "bxt_wcove_gpadc",
.num_resources = ARRAY_SIZE(adc_resources),
.resources = adc_resources,
},
{
.name = "bxt_wcove_thermal",
.num_resources = ARRAY_SIZE(thermal_resources),
.resources = thermal_resources,
},
{
.name = "bxt_wcove_usbc",
.num_resources = ARRAY_SIZE(usbc_resources),
.resources = usbc_resources,
},
{
.name = "bxt_wcove_ext_charger",
.num_resources = ARRAY_SIZE(charger_resources),
.resources = charger_resources,
},
{
.name = "bxt_wcove_bcu",
.num_resources = ARRAY_SIZE(bcu_resources),
.resources = bcu_resources,
},
{
.name = "bxt_wcove_tmu",
.num_resources = ARRAY_SIZE(tmu_resources),
.resources = tmu_resources,
},
{
.name = "bxt_wcove_gpio",
.num_resources = ARRAY_SIZE(gpio_resources),
.resources = gpio_resources,
},
{
.name = "bxt_wcove_region",
},
};
static int regmap_ipc_byte_reg_read(void *context, unsigned int reg,
unsigned int *val)
{
int ret;
int i2c_addr;
u8 ipc_in[2];
u8 ipc_out[4];
struct intel_soc_pmic *pmic = context;
if (!pmic)
return -EINVAL;
if (reg & REG_ADDR_MASK)
i2c_addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
else
i2c_addr = BXTWC_DEVICE1_ADDR;
reg &= REG_OFFSET_MASK;
ipc_in[0] = reg;
ipc_in[1] = i2c_addr;
ret = intel_pmc_ipc_command(PMC_IPC_PMIC_ACCESS,
PMC_IPC_PMIC_ACCESS_READ,
ipc_in, sizeof(ipc_in), (u32 *)ipc_out, 1);
if (ret) {
dev_err(pmic->dev, "Failed to read from PMIC\n");
return ret;
}
*val = ipc_out[0];
return 0;
}
static int regmap_ipc_byte_reg_write(void *context, unsigned int reg,
unsigned int val)
{
int ret;
int i2c_addr;
u8 ipc_in[3];
struct intel_soc_pmic *pmic = context;
if (!pmic)
return -EINVAL;
if (reg & REG_ADDR_MASK)
i2c_addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
else
i2c_addr = BXTWC_DEVICE1_ADDR;
reg &= REG_OFFSET_MASK;
ipc_in[0] = reg;
ipc_in[1] = i2c_addr;
ipc_in[2] = val;
ret = intel_pmc_ipc_command(PMC_IPC_PMIC_ACCESS,
PMC_IPC_PMIC_ACCESS_WRITE,
ipc_in, sizeof(ipc_in), NULL, 0);
if (ret) {
dev_err(pmic->dev, "Failed to write to PMIC\n");
return ret;
}
return 0;
}
/* sysfs interfaces to r/w PMIC registers, required by initial script */
static unsigned long bxtwc_reg_addr;
static ssize_t bxtwc_reg_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "0x%lx\n", bxtwc_reg_addr);
}
static ssize_t bxtwc_reg_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
if (kstrtoul(buf, 0, &bxtwc_reg_addr)) {
dev_err(dev, "Invalid register address\n");
return -EINVAL;
}
return (ssize_t)count;
}
static ssize_t bxtwc_val_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int ret;
unsigned int val;
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
ret = regmap_read(pmic->regmap, bxtwc_reg_addr, &val);
if (ret < 0) {
dev_err(dev, "Failed to read 0x%lx\n", bxtwc_reg_addr);
return -EIO;
}
return sprintf(buf, "0x%02x\n", val);
}
static ssize_t bxtwc_val_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
int ret;
unsigned int val;
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
ret = kstrtouint(buf, 0, &val);
if (ret)
return ret;
ret = regmap_write(pmic->regmap, bxtwc_reg_addr, val);
if (ret) {
dev_err(dev, "Failed to write value 0x%02x to address 0x%lx",
val, bxtwc_reg_addr);
return -EIO;
}
return count;
}
static DEVICE_ATTR(addr, S_IWUSR | S_IRUSR, bxtwc_reg_show, bxtwc_reg_store);
static DEVICE_ATTR(val, S_IWUSR | S_IRUSR, bxtwc_val_show, bxtwc_val_store);
static struct attribute *bxtwc_attrs[] = {
&dev_attr_addr.attr,
&dev_attr_val.attr,
NULL
};
static const struct attribute_group bxtwc_group = {
.attrs = bxtwc_attrs,
};
static const struct regmap_config bxtwc_regmap_config = {
.reg_bits = 16,
.val_bits = 8,
.reg_write = regmap_ipc_byte_reg_write,
.reg_read = regmap_ipc_byte_reg_read,
};
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
static int bxtwc_add_chained_irq_chip(struct intel_soc_pmic *pmic,
struct regmap_irq_chip_data *pdata,
int pirq, int irq_flags,
const struct regmap_irq_chip *chip,
struct regmap_irq_chip_data **data)
{
int irq;
irq = regmap_irq_get_virq(pdata, pirq);
if (irq < 0) {
dev_err(pmic->dev,
"Failed to get parent vIRQ(%d) for chip %s, ret:%d\n",
pirq, chip->name, irq);
return irq;
}
return devm_regmap_add_irq_chip(pmic->dev, pmic->regmap, irq, irq_flags,
0, chip, data);
}
static int bxtwc_probe(struct platform_device *pdev)
{
int ret;
acpi_handle handle;
acpi_status status;
unsigned long long hrv;
struct intel_soc_pmic *pmic;
handle = ACPI_HANDLE(&pdev->dev);
status = acpi_evaluate_integer(handle, "_HRV", NULL, &hrv);
if (ACPI_FAILURE(status)) {
dev_err(&pdev->dev, "Failed to get PMIC hardware revision\n");
return -ENODEV;
}
if (hrv != BROXTON_PMIC_WC_HRV) {
dev_err(&pdev->dev, "Invalid PMIC hardware revision: %llu\n",
hrv);
return -ENODEV;
}
pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
if (!pmic)
return -ENOMEM;
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
dev_err(&pdev->dev, "Invalid IRQ\n");
return ret;
}
pmic->irq = ret;
dev_set_drvdata(&pdev->dev, pmic);
pmic->dev = &pdev->dev;
pmic->regmap = devm_regmap_init(&pdev->dev, NULL, pmic,
&bxtwc_regmap_config);
if (IS_ERR(pmic->regmap)) {
ret = PTR_ERR(pmic->regmap);
dev_err(&pdev->dev, "Failed to initialise regmap: %d\n", ret);
return ret;
}
ret = devm_regmap_add_irq_chip(&pdev->dev, pmic->regmap, pmic->irq,
IRQF_ONESHOT | IRQF_SHARED,
0, &bxtwc_regmap_irq_chip,
&pmic->irq_chip_data);
if (ret) {
dev_err(&pdev->dev, "Failed to add IRQ chip\n");
return ret;
}
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
BXTWC_TMU_LVL1_IRQ,
IRQF_ONESHOT,
&bxtwc_regmap_irq_chip_tmu,
&pmic->irq_chip_data_tmu);
if (ret) {
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
dev_err(&pdev->dev, "Failed to add TMU IRQ chip\n");
return ret;
}
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
/* Add chained IRQ handler for BCU IRQs */
ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
BXTWC_BCU_LVL1_IRQ,
IRQF_ONESHOT,
&bxtwc_regmap_irq_chip_bcu,
&pmic->irq_chip_data_bcu);
if (ret) {
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-06 03:08:05 +08:00
dev_err(&pdev->dev, "Failed to add BUC IRQ chip\n");
return ret;
}
/* Add chained IRQ handler for ADC IRQs */
ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
BXTWC_ADC_LVL1_IRQ,
IRQF_ONESHOT,
&bxtwc_regmap_irq_chip_adc,
&pmic->irq_chip_data_adc);
if (ret) {
dev_err(&pdev->dev, "Failed to add ADC IRQ chip\n");
return ret;
}
/* Add chained IRQ handler for CHGR IRQs */
ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
BXTWC_CHGR_LVL1_IRQ,
IRQF_ONESHOT,
&bxtwc_regmap_irq_chip_chgr,
&pmic->irq_chip_data_chgr);
if (ret) {
dev_err(&pdev->dev, "Failed to add CHGR IRQ chip\n");
return ret;
}
/* Add chained IRQ handler for CRIT IRQs */
ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
BXTWC_CRIT_LVL1_IRQ,
IRQF_ONESHOT,
&bxtwc_regmap_irq_chip_crit,
&pmic->irq_chip_data_crit);
if (ret) {
dev_err(&pdev->dev, "Failed to add CRIT IRQ chip\n");
return ret;
}
ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, bxt_wc_dev,
ARRAY_SIZE(bxt_wc_dev), NULL, 0, NULL);
if (ret) {
dev_err(&pdev->dev, "Failed to add devices\n");
return ret;
}
ret = sysfs_create_group(&pdev->dev.kobj, &bxtwc_group);
if (ret) {
dev_err(&pdev->dev, "Failed to create sysfs group %d\n", ret);
return ret;
}
/*
* There is known hw bug. Upon reset BIT 5 of register
* BXTWC_CHGR_LVL1_IRQ is 0 which is the expected value. However,
* later it's set to 1(masked) automatically by hardware. So we
* have the software workaround here to unmaksed it in order to let
* charger interrutp work.
*/
regmap_update_bits(pmic->regmap, BXTWC_MIRQLVL1,
BXTWC_MIRQLVL1_MCHGR, 0);
return 0;
}
static int bxtwc_remove(struct platform_device *pdev)
{
sysfs_remove_group(&pdev->dev.kobj, &bxtwc_group);
return 0;
}
static void bxtwc_shutdown(struct platform_device *pdev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(&pdev->dev);
disable_irq(pmic->irq);
}
#ifdef CONFIG_PM_SLEEP
static int bxtwc_suspend(struct device *dev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
disable_irq(pmic->irq);
return 0;
}
static int bxtwc_resume(struct device *dev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
enable_irq(pmic->irq);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(bxtwc_pm_ops, bxtwc_suspend, bxtwc_resume);
static const struct acpi_device_id bxtwc_acpi_ids[] = {
{ "INT34D3", },
{ }
};
MODULE_DEVICE_TABLE(acpi, bxtwc_acpi_ids);
static struct platform_driver bxtwc_driver = {
.probe = bxtwc_probe,
.remove = bxtwc_remove,
.shutdown = bxtwc_shutdown,
.driver = {
.name = "BXTWC PMIC",
.pm = &bxtwc_pm_ops,
.acpi_match_table = ACPI_PTR(bxtwc_acpi_ids),
},
};
module_platform_driver(bxtwc_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Qipeng Zha<qipeng.zha@intel.com>");