2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 07:34:06 +08:00
linux-next/drivers/net/netxen/netxen_nic_main.c

1477 lines
40 KiB
C
Raw Normal View History

/*
* Copyright (C) 2003 - 2006 NetXen, Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston,
* MA 02111-1307, USA.
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.
*
* Contact Information:
* info@netxen.com
* NetXen,
* 3965 Freedom Circle, Fourth floor,
* Santa Clara, CA 95054
*
*
* Main source file for NetXen NIC Driver on Linux
*
*/
#include <linux/vmalloc.h>
#include <linux/highmem.h>
#include "netxen_nic_hw.h"
#include "netxen_nic.h"
#include "netxen_nic_phan_reg.h"
#include <linux/dma-mapping.h>
#include <net/ip.h>
MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID);
char netxen_nic_driver_name[] = "netxen_nic";
static char netxen_nic_driver_string[] = "NetXen Network Driver version "
NETXEN_NIC_LINUX_VERSIONID;
static int port_mode = NETXEN_PORT_MODE_AUTO_NEG;
/* Default to restricted 1G auto-neg mode */
static int wol_port_mode = 5;
static int use_msi = 1;
static int use_msi_x = 1;
#define NETXEN_NETDEV_WEIGHT 120
#define NETXEN_ADAPTER_UP_MAGIC 777
#define NETXEN_NIC_PEG_TUNE 0
/* Local functions to NetXen NIC driver */
static int __devinit netxen_nic_probe(struct pci_dev *pdev,
const struct pci_device_id *ent);
static void __devexit netxen_nic_remove(struct pci_dev *pdev);
static int netxen_nic_open(struct net_device *netdev);
static int netxen_nic_close(struct net_device *netdev);
static int netxen_nic_xmit_frame(struct sk_buff *, struct net_device *);
static void netxen_tx_timeout(struct net_device *netdev);
static void netxen_tx_timeout_task(struct work_struct *work);
static void netxen_watchdog(unsigned long);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static int netxen_nic_poll(struct napi_struct *napi, int budget);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void netxen_nic_poll_controller(struct net_device *netdev);
#endif
static irqreturn_t netxen_intr(int irq, void *data);
static irqreturn_t netxen_msi_intr(int irq, void *data);
/* PCI Device ID Table */
#define ENTRY(device) \
{PCI_DEVICE(0x4040, (device)), \
.class = PCI_CLASS_NETWORK_ETHERNET << 8, .class_mask = ~0}
static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
ENTRY(0x0001),
ENTRY(0x0002),
ENTRY(0x0003),
ENTRY(0x0004),
ENTRY(0x0005),
ENTRY(0x0024),
ENTRY(0x0025),
ENTRY(0x0100),
{0,}
};
MODULE_DEVICE_TABLE(pci, netxen_pci_tbl);
/*
* In netxen_nic_down(), we must wait for any pending callback requests into
* netxen_watchdog_task() to complete; eg otherwise the watchdog_timer could be
* reenabled right after it is deleted in netxen_nic_down().
* FLUSH_SCHEDULED_WORK() does this synchronization.
*
* Normally, schedule_work()/flush_scheduled_work() could have worked, but
* netxen_nic_close() is invoked with kernel rtnl lock held. netif_carrier_off()
* call in netxen_nic_close() triggers a schedule_work(&linkwatch_work), and a
* subsequent call to flush_scheduled_work() in netxen_nic_down() would cause
* linkwatch_event() to be executed which also attempts to acquire the rtnl
* lock thus causing a deadlock.
*/
static struct workqueue_struct *netxen_workq;
#define SCHEDULE_WORK(tp) queue_work(netxen_workq, tp)
#define FLUSH_SCHEDULED_WORK() flush_workqueue(netxen_workq)
static void netxen_watchdog(unsigned long);
static uint32_t crb_cmd_producer[4] = {
CRB_CMD_PRODUCER_OFFSET, CRB_CMD_PRODUCER_OFFSET_1,
CRB_CMD_PRODUCER_OFFSET_2, CRB_CMD_PRODUCER_OFFSET_3
};
static inline void
netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
uint32_t crb_producer)
{
adapter->pci_write_normalize(adapter,
adapter->crb_addr_cmd_producer, crb_producer);
}
static uint32_t crb_cmd_consumer[4] = {
CRB_CMD_CONSUMER_OFFSET, CRB_CMD_CONSUMER_OFFSET_1,
CRB_CMD_CONSUMER_OFFSET_2, CRB_CMD_CONSUMER_OFFSET_3
};
static inline void
netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter,
u32 crb_consumer)
{
adapter->pci_write_normalize(adapter,
adapter->crb_addr_cmd_consumer, crb_consumer);
}
static uint32_t msi_tgt_status[8] = {
ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1,
ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3,
ISR_INT_TARGET_STATUS_F4, ISR_INT_TARGET_STATUS_F5,
ISR_INT_TARGET_STATUS_F6, ISR_INT_TARGET_STATUS_F7
};
static uint32_t sw_int_mask[4] = {
CRB_SW_INT_MASK_0, CRB_SW_INT_MASK_1,
CRB_SW_INT_MASK_2, CRB_SW_INT_MASK_3
};
static struct netxen_legacy_intr_set legacy_intr[] = NX_LEGACY_INTR_CONFIG;
static void netxen_nic_disable_int(struct netxen_adapter *adapter)
{
u32 mask = 0x7ff;
int retries = 32;
int port = adapter->portnum;
int pci_fn = adapter->ahw.pci_func;
if (adapter->msi_mode != MSI_MODE_MULTIFUNC)
adapter->pci_write_normalize(adapter, sw_int_mask[port], 0);
if (adapter->intr_scheme != -1 &&
adapter->intr_scheme != INTR_SCHEME_PERPORT)
adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
if (!NETXEN_IS_MSI_FAMILY(adapter)) {
do {
adapter->pci_write_immediate(adapter,
ISR_INT_TARGET_STATUS, 0xffffffff);
mask = adapter->pci_read_immediate(adapter,
ISR_INT_VECTOR);
if (!(mask & 0x80))
break;
udelay(10);
} while (--retries);
if (!retries) {
printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
netxen_nic_driver_name);
}
} else {
if (adapter->msi_mode == MSI_MODE_MULTIFUNC) {
adapter->pci_write_immediate(adapter,
msi_tgt_status[pci_fn], 0xffffffff);
}
}
}
static void netxen_nic_enable_int(struct netxen_adapter *adapter)
{
u32 mask;
int port = adapter->portnum;
DPRINTK(1, INFO, "Entered ISR Enable \n");
if (adapter->intr_scheme != -1 &&
adapter->intr_scheme != INTR_SCHEME_PERPORT) {
switch (adapter->ahw.board_type) {
case NETXEN_NIC_GBE:
mask = 0x77b;
break;
case NETXEN_NIC_XGBE:
mask = 0x77f;
break;
default:
mask = 0x7ff;
break;
}
adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
}
adapter->pci_write_normalize(adapter, sw_int_mask[port], 0x1);
if (!NETXEN_IS_MSI_FAMILY(adapter)) {
mask = 0xbff;
if (adapter->intr_scheme != -1 &&
adapter->intr_scheme != INTR_SCHEME_PERPORT) {
adapter->pci_write_normalize(adapter,
CRB_INT_VECTOR, 0);
}
adapter->pci_write_immediate(adapter,
ISR_INT_TARGET_MASK, mask);
}
DPRINTK(1, INFO, "Done with enable Int\n");
}
static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
{
struct pci_dev *pdev = adapter->pdev;
int err;
uint64_t mask;
#ifdef CONFIG_IA64
adapter->dma_mask = DMA_32BIT_MASK;
#else
if (revision_id >= NX_P3_B0) {
/* should go to DMA_64BIT_MASK */
adapter->dma_mask = DMA_39BIT_MASK;
mask = DMA_39BIT_MASK;
} else if (revision_id == NX_P3_A2) {
adapter->dma_mask = DMA_39BIT_MASK;
mask = DMA_39BIT_MASK;
} else if (revision_id == NX_P2_C1) {
adapter->dma_mask = DMA_35BIT_MASK;
mask = DMA_35BIT_MASK;
} else {
adapter->dma_mask = DMA_32BIT_MASK;
mask = DMA_32BIT_MASK;
goto set_32_bit_mask;
}
/*
* Consistent DMA mask is set to 32 bit because it cannot be set to
* 35 bits. For P3 also leave it at 32 bits for now. Only the rings
* come off this pool.
*/
if (pci_set_dma_mask(pdev, mask) == 0 &&
pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) == 0) {
adapter->pci_using_dac = 1;
return 0;
}
#endif /* CONFIG_IA64 */
set_32_bit_mask:
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (!err)
err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
DPRINTK(ERR, "No usable DMA configuration, aborting:%d\n", err);
return err;
}
adapter->pci_using_dac = 0;
return 0;
}
static void netxen_check_options(struct netxen_adapter *adapter)
{
switch (adapter->ahw.boardcfg.board_type) {
case NETXEN_BRDTYPE_P3_HMEZ:
case NETXEN_BRDTYPE_P3_XG_LOM:
case NETXEN_BRDTYPE_P3_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4_LP:
case NETXEN_BRDTYPE_P3_IMEZ:
case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
case NETXEN_BRDTYPE_P3_10G_XFP:
case NETXEN_BRDTYPE_P3_10000_BASE_T:
adapter->msix_supported = !!use_msi_x;
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
break;
case NETXEN_BRDTYPE_P2_SB31_10G:
case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
adapter->msix_supported = 0;
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
break;
case NETXEN_BRDTYPE_P3_REF_QG:
case NETXEN_BRDTYPE_P3_4_GB:
case NETXEN_BRDTYPE_P3_4_GB_MM:
case NETXEN_BRDTYPE_P2_SB35_4G:
case NETXEN_BRDTYPE_P2_SB31_2G:
adapter->msix_supported = 0;
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
break;
default:
adapter->msix_supported = 0;
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
printk(KERN_WARNING "Unknown board type(0x%x)\n",
adapter->ahw.boardcfg.board_type);
break;
}
adapter->max_tx_desc_count = MAX_CMD_DESCRIPTORS_HOST;
adapter->max_jumbo_rx_desc_count = MAX_JUMBO_RCV_DESCRIPTORS;
adapter->max_lro_rx_desc_count = MAX_LRO_RCV_DESCRIPTORS;
adapter->max_possible_rss_rings = 1;
return;
}
static int
netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
{
int ret = 0;
if (first_boot == 0x55555555) {
/* This is the first boot after power up */
/* PCI bus master workaround */
adapter->hw_read_wx(adapter,
NETXEN_PCIE_REG(0x4), &first_boot, 4);
if (!(first_boot & 0x4)) {
first_boot |= 0x4;
adapter->hw_write_wx(adapter,
NETXEN_PCIE_REG(0x4), &first_boot, 4);
adapter->hw_read_wx(adapter,
NETXEN_PCIE_REG(0x4), &first_boot, 4);
}
/* This is the first boot after power up */
adapter->hw_read_wx(adapter,
NETXEN_ROMUSB_GLB_SW_RESET, &first_boot, 4);
if (first_boot != 0x80000f) {
/* clear the register for future unloads/loads */
adapter->pci_write_normalize(adapter,
NETXEN_CAM_RAM(0x1fc), 0);
ret = -1;
}
if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
/* Start P2 boot loader */
adapter->pci_write_normalize(adapter,
NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
adapter->pci_write_normalize(adapter,
NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
}
}
return ret;
}
static void netxen_set_port_mode(struct netxen_adapter *adapter)
{
u32 val, data;
val = adapter->ahw.boardcfg.board_type;
if ((val == NETXEN_BRDTYPE_P3_HMEZ) ||
(val == NETXEN_BRDTYPE_P3_XG_LOM)) {
if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
data = NETXEN_PORT_MODE_802_3_AP;
adapter->hw_write_wx(adapter,
NETXEN_PORT_MODE_ADDR, &data, 4);
} else if (port_mode == NETXEN_PORT_MODE_XG) {
data = NETXEN_PORT_MODE_XG;
adapter->hw_write_wx(adapter,
NETXEN_PORT_MODE_ADDR, &data, 4);
} else if (port_mode == NETXEN_PORT_MODE_AUTO_NEG_1G) {
data = NETXEN_PORT_MODE_AUTO_NEG_1G;
adapter->hw_write_wx(adapter,
NETXEN_PORT_MODE_ADDR, &data, 4);
} else if (port_mode == NETXEN_PORT_MODE_AUTO_NEG_XG) {
data = NETXEN_PORT_MODE_AUTO_NEG_XG;
adapter->hw_write_wx(adapter,
NETXEN_PORT_MODE_ADDR, &data, 4);
} else {
data = NETXEN_PORT_MODE_AUTO_NEG;
adapter->hw_write_wx(adapter,
NETXEN_PORT_MODE_ADDR, &data, 4);
}
if ((wol_port_mode != NETXEN_PORT_MODE_802_3_AP) &&
(wol_port_mode != NETXEN_PORT_MODE_XG) &&
(wol_port_mode != NETXEN_PORT_MODE_AUTO_NEG_1G) &&
(wol_port_mode != NETXEN_PORT_MODE_AUTO_NEG_XG)) {
wol_port_mode = NETXEN_PORT_MODE_AUTO_NEG;
}
adapter->hw_write_wx(adapter, NETXEN_WOL_PORT_MODE,
&wol_port_mode, 4);
}
}
#define PCI_CAP_ID_GEN 0x10
static void netxen_pcie_strap_init(struct netxen_adapter *adapter)
{
u32 pdevfuncsave;
u32 c8c9value = 0;
u32 chicken = 0;
u32 control = 0;
int i, pos;
struct pci_dev *pdev;
pdev = pci_get_device(0x1166, 0x0140, NULL);
if (pdev) {
pci_dev_put(pdev);
adapter->hw_read_wx(adapter,
NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
chicken |= 0x4000;
adapter->hw_write_wx(adapter,
NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
}
pdev = adapter->pdev;
adapter->hw_read_wx(adapter,
NETXEN_PCIE_REG(PCIE_CHICKEN3), &chicken, 4);
/* clear chicken3.25:24 */
chicken &= 0xFCFFFFFF;
/*
* if gen1 and B0, set F1020 - if gen 2, do nothing
* if gen2 set to F1000
*/
pos = pci_find_capability(pdev, PCI_CAP_ID_GEN);
if (pos == 0xC0) {
pci_read_config_dword(pdev, pos + 0x10, &control);
if ((control & 0x000F0000) != 0x00020000) {
/* set chicken3.24 if gen1 */
chicken |= 0x01000000;
}
printk(KERN_INFO "%s Gen2 strapping detected\n",
netxen_nic_driver_name);
c8c9value = 0xF1000;
} else {
/* set chicken3.24 if gen1 */
chicken |= 0x01000000;
printk(KERN_INFO "%s Gen1 strapping detected\n",
netxen_nic_driver_name);
if (adapter->ahw.revision_id == NX_P3_B0)
c8c9value = 0xF1020;
else
c8c9value = 0;
}
adapter->hw_write_wx(adapter,
NETXEN_PCIE_REG(PCIE_CHICKEN3), &chicken, 4);
if (!c8c9value)
return;
pdevfuncsave = pdev->devfn;
if (pdevfuncsave & 0x07)
return;
for (i = 0; i < 8; i++) {
pci_read_config_dword(pdev, pos + 8, &control);
pci_read_config_dword(pdev, pos + 8, &control);
pci_write_config_dword(pdev, pos + 8, c8c9value);
pdev->devfn++;
}
pdev->devfn = pdevfuncsave;
}
static void netxen_set_msix_bit(struct pci_dev *pdev, int enable)
{
u32 control;
int pos;
pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
if (pos) {
pci_read_config_dword(pdev, pos, &control);
if (enable)
control |= PCI_MSIX_FLAGS_ENABLE;
else
control = 0;
pci_write_config_dword(pdev, pos, control);
}
}
static void netxen_init_msix_entries(struct netxen_adapter *adapter)
{
int i;
for (i = 0; i < MSIX_ENTRIES_PER_ADAPTER; i++)
adapter->msix_entries[i].entry = i;
}
/*
* netxen_nic_probe()
*
* The Linux system will invoke this after identifying the vendor ID and
* device Id in the pci_tbl supported by this module.
*
* A quad port card has one operational PCI config space, (function 0),
* which is used to access all four ports.
*
* This routine will initialize the adapter, and setup the global parameters
* along with the port's specific structure.
*/
static int __devinit
netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct net_device *netdev = NULL;
struct netxen_adapter *adapter = NULL;
void __iomem *mem_ptr0 = NULL;
void __iomem *mem_ptr1 = NULL;
void __iomem *mem_ptr2 = NULL;
unsigned long first_page_group_end;
unsigned long first_page_group_start;
u8 __iomem *db_ptr = NULL;
unsigned long mem_base, mem_len, db_base, db_len, pci_len0 = 0;
int i = 0, err;
int first_driver, first_boot;
__le64 mac_addr[FLASH_NUM_PORTS + 1];
u32 val;
int pci_func_id = PCI_FUNC(pdev->devfn);
DECLARE_MAC_BUF(mac);
struct netxen_legacy_intr_set *legacy_intrp;
uint8_t revision_id;
if (pci_func_id == 0)
printk(KERN_INFO "%s\n", netxen_nic_driver_string);
if (pdev->class != 0x020000) {
printk(KERN_DEBUG "NetXen function %d, class %x will not "
"be enabled.\n",pci_func_id, pdev->class);
return -ENODEV;
}
if ((err = pci_enable_device(pdev)))
return err;
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
err = -ENODEV;
goto err_out_disable_pdev;
}
if ((err = pci_request_regions(pdev, netxen_nic_driver_name)))
goto err_out_disable_pdev;
pci_set_master(pdev);
netdev = alloc_etherdev(sizeof(struct netxen_adapter));
if(!netdev) {
printk(KERN_ERR"%s: Failed to allocate memory for the "
"device block.Check system memory resource"
" usage.\n", netxen_nic_driver_name);
goto err_out_free_res;
}
SET_NETDEV_DEV(netdev, &pdev->dev);
adapter = netdev->priv;
adapter->netdev = netdev;
adapter->pdev = pdev;
adapter->ahw.pci_func = pci_func_id;
revision_id = pdev->revision;
adapter->ahw.revision_id = revision_id;
err = nx_set_dma_mask(adapter, revision_id);
if (err)
goto err_out_free_netdev;
rwlock_init(&adapter->adapter_lock);
adapter->ahw.qdr_sn_window = -1;
adapter->ahw.ddr_mn_window = -1;
/* remap phys address */
mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */
mem_len = pci_resource_len(pdev, 0);
pci_len0 = 0;
adapter->hw_write_wx = netxen_nic_hw_write_wx_128M;
adapter->hw_read_wx = netxen_nic_hw_read_wx_128M;
adapter->pci_read_immediate = netxen_nic_pci_read_immediate_128M;
adapter->pci_write_immediate = netxen_nic_pci_write_immediate_128M;
adapter->pci_read_normalize = netxen_nic_pci_read_normalize_128M;
adapter->pci_write_normalize = netxen_nic_pci_write_normalize_128M;
adapter->pci_set_window = netxen_nic_pci_set_window_128M;
adapter->pci_mem_read = netxen_nic_pci_mem_read_128M;
adapter->pci_mem_write = netxen_nic_pci_mem_write_128M;
/* 128 Meg of memory */
if (mem_len == NETXEN_PCI_128MB_SIZE) {
mem_ptr0 = ioremap(mem_base, FIRST_PAGE_GROUP_SIZE);
mem_ptr1 = ioremap(mem_base + SECOND_PAGE_GROUP_START,
SECOND_PAGE_GROUP_SIZE);
mem_ptr2 = ioremap(mem_base + THIRD_PAGE_GROUP_START,
THIRD_PAGE_GROUP_SIZE);
first_page_group_start = FIRST_PAGE_GROUP_START;
first_page_group_end = FIRST_PAGE_GROUP_END;
} else if (mem_len == NETXEN_PCI_32MB_SIZE) {
mem_ptr1 = ioremap(mem_base, SECOND_PAGE_GROUP_SIZE);
mem_ptr2 = ioremap(mem_base + THIRD_PAGE_GROUP_START -
SECOND_PAGE_GROUP_START, THIRD_PAGE_GROUP_SIZE);
first_page_group_start = 0;
first_page_group_end = 0;
} else if (mem_len == NETXEN_PCI_2MB_SIZE) {
adapter->hw_write_wx = netxen_nic_hw_write_wx_2M;
adapter->hw_read_wx = netxen_nic_hw_read_wx_2M;
adapter->pci_read_immediate = netxen_nic_pci_read_immediate_2M;
adapter->pci_write_immediate =
netxen_nic_pci_write_immediate_2M;
adapter->pci_read_normalize = netxen_nic_pci_read_normalize_2M;
adapter->pci_write_normalize =
netxen_nic_pci_write_normalize_2M;
adapter->pci_set_window = netxen_nic_pci_set_window_2M;
adapter->pci_mem_read = netxen_nic_pci_mem_read_2M;
adapter->pci_mem_write = netxen_nic_pci_mem_write_2M;
mem_ptr0 = ioremap(mem_base, mem_len);
pci_len0 = mem_len;
first_page_group_start = 0;
first_page_group_end = 0;
adapter->ahw.ddr_mn_window = 0;
adapter->ahw.qdr_sn_window = 0;
adapter->ahw.mn_win_crb = 0x100000 + PCIX_MN_WINDOW +
(pci_func_id * 0x20);
adapter->ahw.ms_win_crb = 0x100000 + PCIX_SN_WINDOW;
if (pci_func_id < 4)
adapter->ahw.ms_win_crb += (pci_func_id * 0x20);
else
adapter->ahw.ms_win_crb +=
0xA0 + ((pci_func_id - 4) * 0x10);
} else {
err = -EIO;
goto err_out_free_netdev;
}
dev_info(&pdev->dev, "%dMB memory map\n", (int)(mem_len>>20));
db_base = pci_resource_start(pdev, 4); /* doorbell is on bar 4 */
db_len = pci_resource_len(pdev, 4);
if (db_len == 0) {
printk(KERN_ERR "%s: doorbell is disabled\n",
netxen_nic_driver_name);
err = -EIO;
goto err_out_iounmap;
}
DPRINTK(INFO, "doorbell ioremap from %lx a size of %lx\n", db_base,
db_len);
db_ptr = ioremap(db_base, NETXEN_DB_MAPSIZE_BYTES);
if (!db_ptr) {
printk(KERN_ERR "%s: Failed to allocate doorbell map.",
netxen_nic_driver_name);
err = -EIO;
goto err_out_iounmap;
}
DPRINTK(INFO, "doorbell ioremaped at %p\n", db_ptr);
adapter->ahw.pci_base0 = mem_ptr0;
adapter->ahw.pci_len0 = pci_len0;
adapter->ahw.first_page_group_start = first_page_group_start;
adapter->ahw.first_page_group_end = first_page_group_end;
adapter->ahw.pci_base1 = mem_ptr1;
adapter->ahw.pci_base2 = mem_ptr2;
adapter->ahw.db_base = db_ptr;
adapter->ahw.db_len = db_len;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
netif_napi_add(netdev, &adapter->napi,
netxen_nic_poll, NETXEN_NETDEV_WEIGHT);
if (revision_id >= NX_P3_B0)
legacy_intrp = &legacy_intr[pci_func_id];
else
legacy_intrp = &legacy_intr[0];
adapter->legacy_intr.int_vec_bit = legacy_intrp->int_vec_bit;
adapter->legacy_intr.tgt_status_reg = legacy_intrp->tgt_status_reg;
adapter->legacy_intr.tgt_mask_reg = legacy_intrp->tgt_mask_reg;
adapter->legacy_intr.pci_int_reg = legacy_intrp->pci_int_reg;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
/* this will be read from FW later */
adapter->intr_scheme = -1;
adapter->msi_mode = -1;
/* This will be reset for mezz cards */
adapter->portnum = pci_func_id;
adapter->status &= ~NETXEN_NETDEV_STATUS;
adapter->rx_csum = 1;
adapter->mc_enabled = 0;
if (NX_IS_REVISION_P3(revision_id))
adapter->max_mc_count = 38;
else
adapter->max_mc_count = 16;
netdev->open = netxen_nic_open;
netdev->stop = netxen_nic_close;
netdev->hard_start_xmit = netxen_nic_xmit_frame;
netdev->get_stats = netxen_nic_get_stats;
netdev->set_multicast_list = netxen_nic_set_multi;
netdev->set_mac_address = netxen_nic_set_mac;
netdev->change_mtu = netxen_nic_change_mtu;
netdev->tx_timeout = netxen_tx_timeout;
netdev->watchdog_timeo = 2*HZ;
netxen_nic_change_mtu(netdev, netdev->mtu);
SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
#ifdef CONFIG_NET_POLL_CONTROLLER
netdev->poll_controller = netxen_nic_poll_controller;
#endif
/* ScatterGather support */
netdev->features = NETIF_F_SG;
netdev->features |= NETIF_F_IP_CSUM;
netdev->features |= NETIF_F_TSO;
if (NX_IS_REVISION_P3(revision_id))
netdev->features |= NETIF_F_TSO6;
if (adapter->pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
/*
* Set the CRB window to invalid. If any register in window 0 is
* accessed it should set the window to 0 and then reset it to 1.
*/
adapter->curr_window = 255;
if (netxen_nic_get_board_info(adapter) != 0) {
printk("%s: Error getting board config info.\n",
netxen_nic_driver_name);
err = -EIO;
goto err_out_iounmap;
}
netxen_initialize_adapter_ops(adapter);
/* Mezz cards have PCI function 0,2,3 enabled */
switch (adapter->ahw.boardcfg.board_type) {
case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
if (pci_func_id >= 2)
adapter->portnum = pci_func_id - 2;
break;
default:
break;
}
/*
* This call will setup various max rx/tx counts.
* It must be done before any buffer/ring allocations.
*/
netxen_check_options(adapter);
first_driver = 0;
if (NX_IS_REVISION_P3(revision_id)) {
if (adapter->ahw.pci_func == 0)
first_driver = 1;
} else {
if (adapter->portnum == 0)
first_driver = 1;
}
adapter->crb_addr_cmd_producer = crb_cmd_producer[adapter->portnum];
adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum];
netxen_nic_update_cmd_producer(adapter, 0);
netxen_nic_update_cmd_consumer(adapter, 0);
if (first_driver) {
first_boot = adapter->pci_read_normalize(adapter,
NETXEN_CAM_RAM(0x1fc));
err = netxen_check_hw_init(adapter, first_boot);
if (err) {
printk(KERN_ERR "%s: error in init HW init sequence\n",
netxen_nic_driver_name);
goto err_out_iounmap;
}
if (NX_IS_REVISION_P3(revision_id))
netxen_set_port_mode(adapter);
if (first_boot != 0x55555555) {
adapter->pci_write_normalize(adapter,
CRB_CMDPEG_STATE, 0);
netxen_pinit_from_rom(adapter, 0);
msleep(1);
netxen_load_firmware(adapter);
}
if (NX_IS_REVISION_P3(revision_id))
netxen_pcie_strap_init(adapter);
if (NX_IS_REVISION_P2(revision_id)) {
/* Initialize multicast addr pool owners */
val = 0x7654;
if (adapter->ahw.board_type == NETXEN_NIC_XGBE)
val |= 0x0f000000;
netxen_crb_writelit_adapter(adapter,
NETXEN_MAC_ADDR_CNTL_REG, val);
}
if ((first_boot == 0x55555555) &&
(NX_IS_REVISION_P2(revision_id))) {
/* Unlock the HW, prompting the boot sequence */
adapter->pci_write_normalize(adapter,
NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
}
err = netxen_initialize_adapter_offload(adapter);
if (err)
goto err_out_iounmap;
/*
* Tell the hardware our version number.
*/
i = (_NETXEN_NIC_LINUX_MAJOR << 16)
| ((_NETXEN_NIC_LINUX_MINOR << 8))
| (_NETXEN_NIC_LINUX_SUBVERSION);
adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, i);
/* Handshake with the card before we register the devices. */
netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
if (NX_IS_REVISION_P3(revision_id)) {
adapter->hw_read_wx(adapter,
NETXEN_MIU_MN_CONTROL, &val, 4);
adapter->ahw.cut_through = (val & 0x4) ? 1 : 0;
dev_info(&pdev->dev, "firmware running in %s mode\n",
adapter->ahw.cut_through ? "cut through" : "legacy");
}
} /* first_driver */
netxen_nic_flash_print(adapter);
/*
* See if the firmware gave us a virtual-physical port mapping.
*/
adapter->physical_port = adapter->portnum;
i = adapter->pci_read_normalize(adapter, CRB_V2P(adapter->portnum));
if (i != 0x55555555)
adapter->physical_port = i;
adapter->flags &= ~(NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED);
netxen_set_msix_bit(pdev, 0);
if (NX_IS_REVISION_P3(revision_id)) {
if ((mem_len != NETXEN_PCI_128MB_SIZE) &&
mem_len != NETXEN_PCI_2MB_SIZE)
adapter->msix_supported = 0;
}
if (adapter->msix_supported) {
netxen_init_msix_entries(adapter);
if (pci_enable_msix(pdev, adapter->msix_entries,
MSIX_ENTRIES_PER_ADAPTER))
goto request_msi;
adapter->flags |= NETXEN_NIC_MSIX_ENABLED;
netxen_set_msix_bit(pdev, 1);
dev_info(&pdev->dev, "using msi-x interrupts\n");
} else {
request_msi:
if (use_msi && !pci_enable_msi(pdev)) {
adapter->flags |= NETXEN_NIC_MSI_ENABLED;
dev_info(&pdev->dev, "using msi interrupts\n");
} else
dev_info(&pdev->dev, "using legacy interrupts\n");
}
if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
netdev->irq = adapter->msix_entries[0].vector;
else
netdev->irq = pdev->irq;
err = netxen_receive_peg_ready(adapter);
if (err)
goto err_out_disable_msi;
init_timer(&adapter->watchdog_timer);
adapter->ahw.xg_linkup = 0;
adapter->watchdog_timer.function = &netxen_watchdog;
adapter->watchdog_timer.data = (unsigned long)adapter;
INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
if (netxen_is_flash_supported(adapter) == 0 &&
netxen_get_flash_mac_addr(adapter, mac_addr) == 0) {
unsigned char *p;
p = (unsigned char *)&mac_addr[adapter->portnum];
netdev->dev_addr[0] = *(p + 5);
netdev->dev_addr[1] = *(p + 4);
netdev->dev_addr[2] = *(p + 3);
netdev->dev_addr[3] = *(p + 2);
netdev->dev_addr[4] = *(p + 1);
netdev->dev_addr[5] = *(p + 0);
memcpy(netdev->perm_addr, netdev->dev_addr,
netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr)) {
printk(KERN_ERR "%s: Bad MAC address %s.\n",
netxen_nic_driver_name,
print_mac(mac, netdev->dev_addr));
} else {
adapter->macaddr_set(adapter, netdev->dev_addr);
}
}
netif_carrier_off(netdev);
netif_stop_queue(netdev);
if ((err = register_netdev(netdev))) {
printk(KERN_ERR "%s: register_netdev failed port #%d"
" aborting\n", netxen_nic_driver_name,
adapter->portnum);
err = -EIO;
goto err_out_disable_msi;
}
pci_set_drvdata(pdev, adapter);
switch (adapter->ahw.board_type) {
case NETXEN_NIC_GBE:
dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
adapter->netdev->name);
break;
case NETXEN_NIC_XGBE:
dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n",
adapter->netdev->name);
break;
}
return 0;
err_out_disable_msi:
if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
pci_disable_msix(pdev);
if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
pci_disable_msi(pdev);
if (first_driver)
netxen_free_adapter_offload(adapter);
err_out_iounmap:
if (db_ptr)
iounmap(db_ptr);
if (mem_ptr0)
iounmap(mem_ptr0);
if (mem_ptr1)
iounmap(mem_ptr1);
if (mem_ptr2)
iounmap(mem_ptr2);
err_out_free_netdev:
free_netdev(netdev);
err_out_free_res:
pci_release_regions(pdev);
err_out_disable_pdev:
pci_set_drvdata(pdev, NULL);
pci_disable_device(pdev);
return err;
}
static void __devexit netxen_nic_remove(struct pci_dev *pdev)
{
struct netxen_adapter *adapter;
struct net_device *netdev;
adapter = pci_get_drvdata(pdev);
if (adapter == NULL)
return;
netdev = adapter->netdev;
unregister_netdev(netdev);
if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
netxen_free_hw_resources(adapter);
netxen_free_sw_resources(adapter);
}
if (adapter->portnum == 0)
netxen_free_adapter_offload(adapter);
if (adapter->irq)
free_irq(adapter->irq, adapter);
if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
pci_disable_msix(pdev);
if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
pci_disable_msi(pdev);
iounmap(adapter->ahw.db_base);
iounmap(adapter->ahw.pci_base0);
iounmap(adapter->ahw.pci_base1);
iounmap(adapter->ahw.pci_base2);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
free_netdev(netdev);
}
/*
* Called when a network interface is made active
* @returns 0 on success, negative value on failure
*/
static int netxen_nic_open(struct net_device *netdev)
{
struct netxen_adapter *adapter = (struct netxen_adapter *)netdev->priv;
int err = 0;
int ctx, ring;
irq_handler_t handler;
unsigned long flags = IRQF_SAMPLE_RANDOM;
if (adapter->driver_mismatch)
return -EIO;
if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) {
err = netxen_init_firmware(adapter);
if (err != 0) {
printk(KERN_ERR "Failed to init firmware\n");
return -EIO;
}
err = netxen_alloc_sw_resources(adapter);
if (err) {
printk(KERN_ERR "%s: Error in setting sw resources\n",
netdev->name);
return err;
}
netxen_nic_clear_stats(adapter);
err = netxen_alloc_hw_resources(adapter);
if (err) {
printk(KERN_ERR "%s: Error in setting hw resources\n",
netdev->name);
goto err_out_free_sw;
}
if (adapter->fw_major < 4) {
adapter->crb_addr_cmd_producer =
crb_cmd_producer[adapter->portnum];
adapter->crb_addr_cmd_consumer =
crb_cmd_consumer[adapter->portnum];
}
netxen_nic_update_cmd_producer(adapter, 0);
netxen_nic_update_cmd_consumer(adapter, 0);
for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++)
netxen_post_rx_buffers(adapter, ctx, ring);
}
if (NETXEN_IS_MSI_FAMILY(adapter))
handler = netxen_msi_intr;
else {
flags |= IRQF_SHARED;
handler = netxen_intr;
}
adapter->irq = netdev->irq;
err = request_irq(adapter->irq, handler,
flags, netdev->name, adapter);
if (err) {
printk(KERN_ERR "request_irq failed with: %d\n", err);
goto err_out_free_hw;
}
adapter->is_up = NETXEN_ADAPTER_UP_MAGIC;
}
/* Done here again so that even if phantom sw overwrote it,
* we set it */
err = adapter->init_port(adapter, adapter->portnum);
if (err) {
printk(KERN_ERR "%s: Failed to initialize port %d\n",
netxen_nic_driver_name, adapter->portnum);
goto err_out_free_irq;
}
adapter->macaddr_set(adapter, netdev->dev_addr);
netxen_nic_set_link_parameters(adapter);
netxen_nic_set_multi(netdev);
adapter->set_mtu(adapter, netdev->mtu);
mod_timer(&adapter->watchdog_timer, jiffies);
napi_enable(&adapter->napi);
netxen_nic_enable_int(adapter);
netif_start_queue(netdev);
return 0;
err_out_free_irq:
free_irq(adapter->irq, adapter);
err_out_free_hw:
netxen_free_hw_resources(adapter);
err_out_free_sw:
netxen_free_sw_resources(adapter);
return err;
}
/*
* netxen_nic_close - Disables a network interface entry point
*/
static int netxen_nic_close(struct net_device *netdev)
{
struct netxen_adapter *adapter = netdev_priv(netdev);
netif_carrier_off(netdev);
netif_stop_queue(netdev);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
napi_disable(&adapter->napi);
if (adapter->stop_port)
adapter->stop_port(adapter);
netxen_nic_disable_int(adapter);
netxen_release_tx_buffers(adapter);
if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
FLUSH_SCHEDULED_WORK();
del_timer_sync(&adapter->watchdog_timer);
}
return 0;
}
static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
struct netxen_adapter *adapter = netdev_priv(netdev);
struct netxen_hardware_context *hw = &adapter->ahw;
unsigned int first_seg_len = skb->len - skb->data_len;
struct netxen_skb_frag *buffrag;
unsigned int i;
u32 producer, consumer;
u32 saved_producer = 0;
struct cmd_desc_type0 *hwdesc;
int k;
struct netxen_cmd_buffer *pbuf = NULL;
int frag_count;
int no_of_desc;
u32 num_txd = adapter->max_tx_desc_count;
frag_count = skb_shinfo(skb)->nr_frags + 1;
/* There 4 fragments per descriptor */
no_of_desc = (frag_count + 3) >> 2;
if (netdev->features & NETIF_F_TSO) {
if (skb_shinfo(skb)->gso_size > 0) {
no_of_desc++;
if ((ip_hdrlen(skb) + tcp_hdrlen(skb) +
sizeof(struct ethhdr)) >
(sizeof(struct cmd_desc_type0) - 2)) {
no_of_desc++;
}
}
}
producer = adapter->cmd_producer;
smp_mb();
consumer = adapter->last_cmd_consumer;
if ((no_of_desc+2) > find_diff_among(producer, consumer, num_txd)) {
netif_stop_queue(netdev);
smp_mb();
return NETDEV_TX_BUSY;
}
/* Copy the descriptors into the hardware */
saved_producer = producer;
hwdesc = &hw->cmd_desc_head[producer];
memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
/* Take skb->data itself */
pbuf = &adapter->cmd_buf_arr[producer];
if ((netdev->features & NETIF_F_TSO) && skb_shinfo(skb)->gso_size > 0) {
pbuf->mss = skb_shinfo(skb)->gso_size;
hwdesc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
} else {
pbuf->mss = 0;
hwdesc->mss = 0;
}
pbuf->total_length = skb->len;
pbuf->skb = skb;
pbuf->cmd = TX_ETHER_PKT;
pbuf->frag_count = frag_count;
pbuf->port = adapter->portnum;
buffrag = &pbuf->frag_array[0];
buffrag->dma = pci_map_single(adapter->pdev, skb->data, first_seg_len,
PCI_DMA_TODEVICE);
buffrag->length = first_seg_len;
netxen_set_cmd_desc_totallength(hwdesc, skb->len);
netxen_set_cmd_desc_num_of_buff(hwdesc, frag_count);
netxen_set_cmd_desc_opcode(hwdesc, TX_ETHER_PKT);
netxen_set_cmd_desc_port(hwdesc, adapter->portnum);
netxen_set_cmd_desc_ctxid(hwdesc, adapter->portnum);
hwdesc->buffer1_length = cpu_to_le16(first_seg_len);
hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma);
for (i = 1, k = 1; i < frag_count; i++, k++) {
struct skb_frag_struct *frag;
int len, temp_len;
unsigned long offset;
dma_addr_t temp_dma;
/* move to next desc. if there is a need */
if ((i & 0x3) == 0) {
k = 0;
producer = get_next_index(producer, num_txd);
hwdesc = &hw->cmd_desc_head[producer];
memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
pbuf = &adapter->cmd_buf_arr[producer];
pbuf->skb = NULL;
}
frag = &skb_shinfo(skb)->frags[i - 1];
len = frag->size;
offset = frag->page_offset;
temp_len = len;
temp_dma = pci_map_page(adapter->pdev, frag->page, offset,
len, PCI_DMA_TODEVICE);
buffrag++;
buffrag->dma = temp_dma;
buffrag->length = temp_len;
switch (k) {
case 0:
hwdesc->buffer1_length = cpu_to_le16(temp_len);
hwdesc->addr_buffer1 = cpu_to_le64(temp_dma);
break;
case 1:
hwdesc->buffer2_length = cpu_to_le16(temp_len);
hwdesc->addr_buffer2 = cpu_to_le64(temp_dma);
break;
case 2:
hwdesc->buffer3_length = cpu_to_le16(temp_len);
hwdesc->addr_buffer3 = cpu_to_le64(temp_dma);
break;
case 3:
hwdesc->buffer4_length = cpu_to_le16(temp_len);
hwdesc->addr_buffer4 = cpu_to_le64(temp_dma);
break;
}
frag++;
}
producer = get_next_index(producer, num_txd);
/* might change opcode to TX_TCP_LSO */
netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb);
/* For LSO, we need to copy the MAC/IP/TCP headers into
* the descriptor ring
*/
if (netxen_get_cmd_desc_opcode(&hw->cmd_desc_head[saved_producer])
== TX_TCP_LSO) {
int hdr_len, first_hdr_len, more_hdr;
hdr_len = hw->cmd_desc_head[saved_producer].total_hdr_length;
if (hdr_len > (sizeof(struct cmd_desc_type0) - 2)) {
first_hdr_len = sizeof(struct cmd_desc_type0) - 2;
more_hdr = 1;
} else {
first_hdr_len = hdr_len;
more_hdr = 0;
}
/* copy the MAC/IP/TCP headers to the cmd descriptor list */
hwdesc = &hw->cmd_desc_head[producer];
pbuf = &adapter->cmd_buf_arr[producer];
pbuf->skb = NULL;
/* copy the first 64 bytes */
memcpy(((void *)hwdesc) + 2,
(void *)(skb->data), first_hdr_len);
producer = get_next_index(producer, num_txd);
if (more_hdr) {
hwdesc = &hw->cmd_desc_head[producer];
pbuf = &adapter->cmd_buf_arr[producer];
pbuf->skb = NULL;
/* copy the next 64 bytes - should be enough except
* for pathological case
*/
skb_copy_from_linear_data_offset(skb, first_hdr_len,
hwdesc,
(hdr_len -
first_hdr_len));
producer = get_next_index(producer, num_txd);
}
}
adapter->cmd_producer = producer;
adapter->stats.txbytes += skb->len;
netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
adapter->stats.xmitcalled++;
netdev->trans_start = jiffies;
return NETDEV_TX_OK;
}
static void netxen_watchdog(unsigned long v)
{
struct netxen_adapter *adapter = (struct netxen_adapter *)v;
SCHEDULE_WORK(&adapter->watchdog_task);
}
static void netxen_tx_timeout(struct net_device *netdev)
{
struct netxen_adapter *adapter = (struct netxen_adapter *)
netdev_priv(netdev);
SCHEDULE_WORK(&adapter->tx_timeout_task);
}
static void netxen_tx_timeout_task(struct work_struct *work)
{
struct netxen_adapter *adapter =
container_of(work, struct netxen_adapter, tx_timeout_task);
printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
netxen_nic_driver_name, adapter->netdev->name);
netxen_nic_disable_int(adapter);
napi_disable(&adapter->napi);
adapter->netdev->trans_start = jiffies;
napi_enable(&adapter->napi);
netxen_nic_enable_int(adapter);
netif_wake_queue(adapter->netdev);
}
static inline void
netxen_handle_int(struct netxen_adapter *adapter)
{
netxen_nic_disable_int(adapter);
napi_schedule(&adapter->napi);
}
static irqreturn_t netxen_intr(int irq, void *data)
{
struct netxen_adapter *adapter = data;
u32 our_int = 0;
our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
/* not our interrupt */
if ((our_int & (0x80 << adapter->portnum)) == 0)
return IRQ_NONE;
if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
/* claim interrupt */
adapter->pci_write_normalize(adapter, CRB_INT_VECTOR,
our_int & ~((u32)(0x80 << adapter->portnum)));
}
netxen_handle_int(adapter);
return IRQ_HANDLED;
}
static irqreturn_t netxen_msi_intr(int irq, void *data)
{
struct netxen_adapter *adapter = data;
netxen_handle_int(adapter);
return IRQ_HANDLED;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static int netxen_nic_poll(struct napi_struct *napi, int budget)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct netxen_adapter *adapter = container_of(napi, struct netxen_adapter, napi);
int tx_complete;
int ctx;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
int work_done;
tx_complete = netxen_process_cmd_ring(adapter);
work_done = 0;
for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
/*
* Fairness issue. This will give undue weight to the
* receive context 0.
*/
/*
* To avoid starvation, we give each of our receivers,
* a fraction of the quota. Sometimes, it might happen that we
* have enough quota to process every packet, but since all the
* packets are on one context, it gets only half of the quota,
* and ends up not processing it.
*/
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
work_done += netxen_process_rcv_ring(adapter, ctx,
budget / MAX_RCV_CTX);
}
if ((work_done < budget) && tx_complete) {
netif_rx_complete(adapter->netdev, &adapter->napi);
netxen_nic_enable_int(adapter);
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
return work_done;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
static void netxen_nic_poll_controller(struct net_device *netdev)
{
struct netxen_adapter *adapter = netdev_priv(netdev);
disable_irq(adapter->irq);
netxen_intr(adapter->irq, adapter);
enable_irq(adapter->irq);
}
#endif
static struct pci_driver netxen_driver = {
.name = netxen_nic_driver_name,
.id_table = netxen_pci_tbl,
.probe = netxen_nic_probe,
.remove = __devexit_p(netxen_nic_remove)
};
/* Driver Registration on NetXen card */
static int __init netxen_init_module(void)
{
if ((netxen_workq = create_singlethread_workqueue("netxen")) == NULL)
return -ENOMEM;
return pci_register_driver(&netxen_driver);
}
module_init(netxen_init_module);
static void __exit netxen_exit_module(void)
{
pci_unregister_driver(&netxen_driver);
destroy_workqueue(netxen_workq);
}
module_exit(netxen_exit_module);