2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
linux-next/arch/arm/mach-omap2/clockdomain44xx.c

152 lines
4.1 KiB
C
Raw Normal View History

/*
* OMAP4 clockdomain control
*
* Copyright (C) 2008-2010 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
*
* Derived from mach-omap2/clockdomain.c written by Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include "clockdomain.h"
#include "cminst44xx.h"
#include "cm44xx.h"
static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
clkdm1->prcm_partition,
clkdm1->cm_inst, clkdm1->clkdm_offs +
OMAP4_CM_STATICDEP);
return 0;
}
static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
clkdm1->prcm_partition,
clkdm1->cm_inst, clkdm1->clkdm_offs +
OMAP4_CM_STATICDEP);
return 0;
}
static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
clkdm1->cm_inst, clkdm1->clkdm_offs +
OMAP4_CM_STATICDEP,
(1 << clkdm2->dep_bit));
}
static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
{
struct clkdm_dep *cd;
u32 mask = 0;
if (!clkdm->prcm_partition)
return 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->wkdep_usecount, 0);
}
omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs +
OMAP4_CM_STATICDEP);
return 0;
}
static int omap4_clkdm_sleep(struct clockdomain *clkdm)
{
ARM: OMAP4: clockdomain/CM code: Update supported transition modes For OMAP3+ devices, the clock domains (CLKDMs) support one or more of the following transition modes ... NO_SLEEP (0x0) - A clock domain sleep transition is never initiated, irrespective of the hardware conditions. SW_SLEEP (0x1) - A software-forced sleep transition. The transition is initiated when the associated hardware conditions are satisfied SW_WKUP (0x2) - A software-forced clock domain wake-up transition is initiated, irrespective of the hardware conditions. HW_AUTO (0x3) - Hardware-controlled automatic sleep and wake-up transition is initiated by the PRCM module when the associated hardware conditions are satisfied. For OMAP4 devices, SW_SLEEP is equivalent to HW_AUTO and NO_SLEEP is equivalent to SW_WKUP. The only difference between HW_AUTO and SW_SLEEP for OMAP4 devices is that the PRM_IRQSTATUS_MPU.TRANSITION_ST interrupt status is set in case of SW_SLEEP transition, and not set in case of HW_AUTO transition. For OMAP4 devices, all CLKDMs support HW_AUTO and therefore we can place the CLKDMs in the HW_AUTO state instead of the SW_SLEEP mode. Hence, we do not need to use the SW_SLEEP mode. With regard to NO_SLEEP and SW_WKUP it is preferred to use SW_WKUP mode if the CLKDM supports it and so use this mode instead of NO_SLEEP where possible. For a software perspective the above 4 modes are represented by the following flags to indicate what modes are supported by each of the CLKDMs. CLKDM_CAN_DISABLE_AUTO --> NO_SLEEP CLKDM_CAN_ENABLE_AUTO --> HW_AUTO CLKDM_CAN_FORCE_SLEEP --> SW_SLEEP CLKDM_CAN_FORCE_WAKEUP --> SW_WKUP By eliminating the SW_SLEEP mode the the mapping of the flags for OMAP4 devices can becomes ... CLKDM_CAN_DISABLE_AUTO --> NO_SLEEP CLKDM_CAN_ENABLE_AUTO --> HW_AUTO CLKDM_CAN_FORCE_SLEEP --> HW_AUTO CLKDM_CAN_FORCE_WAKEUP --> SW_WKUP Cc: Ming Lei <ming.lei@canonical.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Reviewed-by: Benoit Cousson <b-cousson@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-07-04 17:45:53 +08:00
omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
{
omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
{
omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
}
static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
{
ARM: OMAP4: clockdomain/CM code: Update supported transition modes For OMAP3+ devices, the clock domains (CLKDMs) support one or more of the following transition modes ... NO_SLEEP (0x0) - A clock domain sleep transition is never initiated, irrespective of the hardware conditions. SW_SLEEP (0x1) - A software-forced sleep transition. The transition is initiated when the associated hardware conditions are satisfied SW_WKUP (0x2) - A software-forced clock domain wake-up transition is initiated, irrespective of the hardware conditions. HW_AUTO (0x3) - Hardware-controlled automatic sleep and wake-up transition is initiated by the PRCM module when the associated hardware conditions are satisfied. For OMAP4 devices, SW_SLEEP is equivalent to HW_AUTO and NO_SLEEP is equivalent to SW_WKUP. The only difference between HW_AUTO and SW_SLEEP for OMAP4 devices is that the PRM_IRQSTATUS_MPU.TRANSITION_ST interrupt status is set in case of SW_SLEEP transition, and not set in case of HW_AUTO transition. For OMAP4 devices, all CLKDMs support HW_AUTO and therefore we can place the CLKDMs in the HW_AUTO state instead of the SW_SLEEP mode. Hence, we do not need to use the SW_SLEEP mode. With regard to NO_SLEEP and SW_WKUP it is preferred to use SW_WKUP mode if the CLKDM supports it and so use this mode instead of NO_SLEEP where possible. For a software perspective the above 4 modes are represented by the following flags to indicate what modes are supported by each of the CLKDMs. CLKDM_CAN_DISABLE_AUTO --> NO_SLEEP CLKDM_CAN_ENABLE_AUTO --> HW_AUTO CLKDM_CAN_FORCE_SLEEP --> SW_SLEEP CLKDM_CAN_FORCE_WAKEUP --> SW_WKUP By eliminating the SW_SLEEP mode the the mapping of the flags for OMAP4 devices can becomes ... CLKDM_CAN_DISABLE_AUTO --> NO_SLEEP CLKDM_CAN_ENABLE_AUTO --> HW_AUTO CLKDM_CAN_FORCE_SLEEP --> HW_AUTO CLKDM_CAN_FORCE_WAKEUP --> SW_WKUP Cc: Ming Lei <ming.lei@canonical.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Reviewed-by: Benoit Cousson <b-cousson@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-07-04 17:45:53 +08:00
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap4_clkdm_wakeup(clkdm);
else
omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst,
clkdm->clkdm_offs);
}
static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
{
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
return omap4_clkdm_wakeup(clkdm);
return 0;
}
static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->prcm_partition)
return 0;
ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems The idle status of the IP blocks and clocks inside the EMU clockdomain isn't taken into account by the PRCM hardware when deciding whether the clockdomain is idle. Add a workaround flag in the clockdomain code, CLKDM_MISSING_IDLE_REPORTING, to deal with this problem, and add the code necessary to support it. If CLKDM_MISSING_IDLE_REPORTING is set on a clockdomain, the clockdomain will be forced active whenever an IP block inside that clockdomain is in use, even if the clockdomain supports hardware-supervised idle. When the kernel indicates that the last active IP block inside the clockdomain is no longer used, the clockdomain will be forced idle, or, if that mode is not supported in the hardware, it will be placed into hardware-supervised idle. This patch is an equal collaboration with Jon Hunter <jon-hunter@ti.com>. Ming Lei <ming.lei@canonical.com>, Will Deacon <will.deacon@arm.com>, Madhav Vij <mvij@ti.com>, Kevin Hilman <khilman@ti.com>, Benoît Cousson <b-cousson@ti.com>, and Santosh Shilimkar <santosh.shilimkar@ti.com> all made essential contributions to the understanding of EMU clockdomain power management on OMAP. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jon Hunter <jon-hunter@ti.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Madhav Vij <mvij@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Jon Hunter <jon-hunter@ti.com>
2012-09-24 07:28:28 +08:00
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
omap4_clkdm_allow_idle(clkdm);
return 0;
}
hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
omap4_clkdm_sleep(clkdm);
return 0;
}
struct clkdm_ops omap4_clkdm_operations = {
.clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep,
.clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep,
.clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep,
.clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
.clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep,
.clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep,
.clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep,
.clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
.clkdm_sleep = omap4_clkdm_sleep,
.clkdm_wakeup = omap4_clkdm_wakeup,
.clkdm_allow_idle = omap4_clkdm_allow_idle,
.clkdm_deny_idle = omap4_clkdm_deny_idle,
.clkdm_clk_enable = omap4_clkdm_clk_enable,
.clkdm_clk_disable = omap4_clkdm_clk_disable,
};