renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 07:04:00 +08:00
Code
2570fe2586
linux-next/drivers/gpu/drm/tilcdc/Kconfig

26 lines
867 B
Plaintext
Raw Normal View History

drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
2013-01-09 05:04:28 +08:00
config DRM_TILCDC
tristate "DRM Support for TI LCDC Display Controller"
dma-mapping: always provide the dma_map_ops based implementation Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 07:02:05 +08:00
depends on DRM && OF && ARM
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
2013-01-09 05:04:28 +08:00
select DRM_KMS_HELPER
select DRM_KMS_CMA_HELPER
select DRM_GEM_CMA_HELPER
videomode: simplify videomode Kconfig and Makefile This patch simplifies videomode related Kconfig and Makefile. After this patch, there's only one non-user selectable Kconfig option left, VIDEOMODE_HELPERS. The reasons for the change: * Videomode helper functions are not something that should be shown in the kernel configuration options. The related code should just be included if it's needed, i.e. selected by drivers using videomode. * There's no need to have separate Kconfig options for videomode and display_timing. First of all, the amount of code for both is quite small. Second, videomode depends on display_timing, and display_timing in itself is not really useful, so both would be included in any case. * CONFIG_VIDEOMODE is a bit vague name, and CONFIG_VIDEOMODE_HELPERS describes better what's included. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-03-12 16:15:43 +08:00
select VIDEOMODE_HELPERS
drm/tilcdc: add support for LCD panels (v5) Add an output panel driver for LCD panels. Tested with LCD3 cape on beaglebone. v1: original v2: s/of_find_node_by_name()/of_get_child_by_name()/ from Pantelis Antoniou v3: add backlight support v4: rebase to latest of video timing helpers v5: remove some unneeded fields from panel-info struct, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
2012-12-19 07:34:16 +08:00
select BACKLIGHT_CLASS_DEVICE
drm/tilcd: select BACKLIGHT_LCD_SUPPORT The dependecies for BACKLIGHT_CLASS_DEVICE are defined a bit strange, but it seems one has to always select both BACKLIGHT_CLASS_DEVICE and BACKLIGHT_LCD_SUPPORT to avoid this error: drivers/gpu/drm/tilcdc/tilcdc_panel.c:396: undefined reference to `of_find_backlight_by_node' Cc: Rob Clark <robdclark@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-01 06:22:47 +08:00
select BACKLIGHT_LCD_SUPPORT
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
2013-01-09 05:04:28 +08:00
help
Choose this option if you have an TI SoC with LCDC display
controller, for example AM33xx in beagle-bone, DA8xx, or
OMAP-L1xx. This driver replaces the FB_DA8XX fbdev driver.
drm/tilcdc: Add DRM_TILCDC_SLAVE_COMPAT for ti,tilcdc,slave binding support Adds a CONFIG_DRM_TILCDC_SLAVE_COMPAT module for "ti,tilcdc,slave" node conversion. The implementation is in tilcdc_slave_compat.c and it uses tilcdc_slave_compat.dts as a basis for creating a DTS overlay. The DTS overlay adds an external tda998x encoder to tilcdc that corresponds to the old tda998x based slave encoder. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-18 17:24:03 +08:00
config DRM_TILCDC_SLAVE_COMPAT
bool "Support device tree blobs using TI LCDC Slave binding"
depends on DRM_TILCDC
default y
select OF_RESOLVE
select OF_OVERLAY
help
Choose this option if you need a kernel that is compatible
with device tree blobs using the obsolete "ti,tilcdc,slave"
binding. If you find "ti,tilcdc,slave"-string from your DTB,
you probably need this. Otherwise you do not.
Copy Permalink