renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 06:04:14 +08:00
Code
191b79b088
linux-next/drivers/cpufreq/Kconfig.arm

152 lines
3.5 KiB
Plaintext
Raw Normal View History

[CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/ According to discussion of the ARM arch subsystem migration, ARM cpufreq drivers move to drivers/cpufreq. So this patch adds Kconfig.arm for ARM like x86 and adds Samsung S5PV210 and EXYNOS4210 cpufreq driver compile in there. As a note, otherw will be moved. Cc: Dave Jones <davej@redhat.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-06-02 05:18:22 +08:00
#
# ARM CPU Frequency scaling drivers
#
cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue big LITTLE is ARM's new Architecture focussing power/performance needs of modern world. More information about big LITTLE can be found here: http://www.arm.com/products/processors/technologies/biglittleprocessing.php http://lwn.net/Articles/481055/ In order to keep cpufreq support for all big LITTLE platforms simple/generic, this patch tries to add a generic cpufreq driver layer for all big LITTLE platforms. The driver is divided into two parts: - Core driver: Generic and shared across all big LITTLE SoC's - Glue drivers: Per platform drivers providing ops to the core driver This patch adds in a generic glue driver which would extract information from Device Tree. Future SoC's can either reuse the DT glue or write their own depending on the need. Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-01 20:57:49 +08:00
config ARM_BIG_LITTLE_CPUFREQ
tristate
depends on ARM_CPU_TOPOLOGY
config ARM_DT_BL_CPUFREQ
tristate "Generic ARM big LITTLE CPUfreq driver probed via DT"
select ARM_BIG_LITTLE_CPUFREQ
depends on OF && HAVE_CLK
help
This enables the Generic CPUfreq driver for ARM big.LITTLE platform.
This gets frequency tables from DT.
cpufreq: ARM: Arrange drivers in alphabetical order Normally we keep drivers in alphabetical inside Kconfig and Makefile and over time this was broken for ARM cpufreq drivers. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-04 20:54:09 +08:00
config ARM_EXYNOS_CPUFREQ
bool "SAMSUNG EXYNOS SoCs"
depends on ARCH_EXYNOS
default y
help
This adds the CPUFreq driver common part for Samsung
EXYNOS SoCs.
If in doubt, say N.
config ARM_EXYNOS4210_CPUFREQ
def_bool CPU_EXYNOS4210
help
This adds the CPUFreq driver for Samsung EXYNOS4210
SoC (S5PV310 or S5PC210).
config ARM_EXYNOS4X12_CPUFREQ
def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
help
This adds the CPUFreq driver for Samsung EXYNOS4X12
SoC (EXYNOS4212 or EXYNOS4412).
config ARM_EXYNOS5250_CPUFREQ
def_bool SOC_EXYNOS5250
help
This adds the CPUFreq driver for Samsung EXYNOS5250
SoC.
cpufreq: exynos: Add cpufreq driver for exynos5440 This patch adds dvfs support for exynos5440 SOC. This soc has 4 cores and they scale at same frequency. The nature of exynos5440 clock controller is different from previous exynos controllers so not using the common exynos cpufreq framework. The major difference being interrupt notification for frequency change. Also, OPP library is used for device tree parsing to get different parameters like frequency, voltage etc. Since the opp library sorts the frequency table in ascending order so they are again re-arranged in descending order. This will have one-to-one mapping with the clock controller state management logic. Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-08 17:57:34 +08:00
config ARM_EXYNOS5440_CPUFREQ
def_bool SOC_EXYNOS5440
depends on HAVE_CLK && PM_OPP && OF
help
This adds the CPUFreq driver for Samsung EXYNOS5440
SoC. The nature of exynos5440 clock controller is
different than previous exynos controllers so not using
the common exynos framework.
cpufreq: ARM: Arrange drivers in alphabetical order Normally we keep drivers in alphabetical inside Kconfig and Makefile and over time this was broken for ARM cpufreq drivers. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-04 20:54:09 +08:00
config ARM_HIGHBANK_CPUFREQ
tristate "Calxeda Highbank-based"
depends on ARCH_HIGHBANK
select CPU_FREQ_TABLE
select GENERIC_CPUFREQ_CPU0
select PM_OPP
select REGULATOR
default m
help
This adds the CPUFreq driver for Calxeda Highbank SoC
based boards.
If in doubt, say N.
config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6Q cpufreq support"
depends on SOC_IMX6Q
depends on REGULATOR_ANATOP
help
This adds cpufreq driver support for Freescale i.MX6Q SOC.
If in doubt, say N.
cpufreq: integrator: move cpufreq driver to drivers/cpufreq This patch moves cpufreq driver of ARM based integrator platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-04 20:54:14 +08:00
config ARM_INTEGRATOR
tristate "CPUfreq driver for ARM Integrator CPUs"
depends on ARCH_INTEGRATOR
default y
help
This enables the CPUfreq driver for ARM Integrator CPUs.
If in doubt, say Y.
cpufreq: ARM: Arrange drivers in alphabetical order Normally we keep drivers in alphabetical inside Kconfig and Makefile and over time this was broken for ARM cpufreq drivers. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-04 20:54:09 +08:00
config ARM_KIRKWOOD_CPUFREQ
def_bool ARCH_KIRKWOOD && OF
help
This adds the CPUFreq driver for Marvell Kirkwood
SoCs.
cpufreq: OMAP driver depends CPUfreq tables The OMAP driver depends on CPUfreq table support for creating a table of frequencies from the OPP layer. Ensure that it's build to avoid link-time errors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [khilman@ti.com: make user-selectable, but default y] Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-02-16 03:01:11 +08:00
config ARM_OMAP2PLUS_CPUFREQ
bool "TI OMAP2+"
cpufreq: OMAP: fix build errors: depends on ARCH_OMAP2PLUS The OMAP driver needs a 'depends on ARCH_OMAP2PLUS' since it only builds for OMAP2+ platforms. This 'depends on' was in the original patch from Russell King, but was erroneously removed by me when making this option user-selectable in commit b09db45c (cpufreq: OMAP driver depends CPUfreq tables.) This patch remedies that. Apologies to Russell King for breaking his originally working patch. Also, thanks to Grazvydas Ignotas for reporting the same problem. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-14 04:32:30 +08:00
depends on ARCH_OMAP2PLUS
cpufreq: OMAP driver depends CPUfreq tables The OMAP driver depends on CPUfreq table support for creating a table of frequencies from the OPP layer. Ensure that it's build to avoid link-time errors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [khilman@ti.com: make user-selectable, but default y] Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-02-16 03:01:11 +08:00
default ARCH_OMAP2PLUS
select CPU_FREQ_TABLE
[CPUFREQ] Add S3C2416/S3C2450 cpufreq driver The S3C2416/S3C2450 SoCs support two sources for the armclk. The first source is the so called armdiv which divides the msysclk down to provide necessary cpu rates. In this mode the core voltage must be always at 1.3V. The frequency from the armdiv is not allowed to be lower than the hclk frequency. In the second mode the armclk can be sourced directly from the hclk in the so called "dynamic voltags scaling" (dvs) mode. Here the armdiv isn't used at all. Also in this mode the core voltage may be lowered. Existing hardware and tests with it suggest 1.0V as sufficient. When changing the clock source to the armdiv from the hclk, the SoC shows stability issues if the new frequency is higher than the current hclk frequency. Hence the driver always forces the armdiv to the hclk frequency before the source change and lets the cpufreq issue another set_target call for higher frequencies. To mark the hclk frequency as lower as the corresponding armdiv frequency it is set 1MHz below the real frequency. This lets the cpufreq framework change between 133MHz based on hclk and 133MHz based on armdiv at will. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Andrey Gusakov <dron0gus@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
2012-02-16 18:42:32 +08:00
config ARM_S3C2416_CPUFREQ
bool "S3C2416 CPU Frequency scaling support"
depends on CPU_S3C2416
help
This adds the CPUFreq driver for the Samsung S3C2416 and
S3C2450 SoC. The S3C2416 supports changing the rate of the
armdiv clock source and also entering a so called dynamic
voltage scaling mode in which it is possible to reduce the
core voltage of the cpu.
If in doubt, say N.
config ARM_S3C2416_CPUFREQ_VCORESCALE
drivers/cpufreq: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-03 02:16:53 +08:00
bool "Allow voltage scaling for S3C2416 arm core"
depends on ARM_S3C2416_CPUFREQ && REGULATOR
[CPUFREQ] Add S3C2416/S3C2450 cpufreq driver The S3C2416/S3C2450 SoCs support two sources for the armclk. The first source is the so called armdiv which divides the msysclk down to provide necessary cpu rates. In this mode the core voltage must be always at 1.3V. The frequency from the armdiv is not allowed to be lower than the hclk frequency. In the second mode the armclk can be sourced directly from the hclk in the so called "dynamic voltags scaling" (dvs) mode. Here the armdiv isn't used at all. Also in this mode the core voltage may be lowered. Existing hardware and tests with it suggest 1.0V as sufficient. When changing the clock source to the armdiv from the hclk, the SoC shows stability issues if the new frequency is higher than the current hclk frequency. Hence the driver always forces the armdiv to the hclk frequency before the source change and lets the cpufreq issue another set_target call for higher frequencies. To mark the hclk frequency as lower as the corresponding armdiv frequency it is set 1MHz below the real frequency. This lets the cpufreq framework change between 133MHz based on hclk and 133MHz based on armdiv at will. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Andrey Gusakov <dron0gus@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
2012-02-16 18:42:32 +08:00
help
Enable CPU voltage scaling when entering the dvs mode.
It uses information gathered through existing hardware and
tests but not documented in any datasheet.
If in doubt, say N.
[CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-06-07 09:43:01 +08:00
config ARM_S3C64XX_CPUFREQ
bool "Samsung S3C64XX"
depends on CPU_S3C6410
default y
help
This adds the CPUFreq driver for Samsung S3C6410 SoC.
If in doubt, say N.
[CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/ According to discussion of the ARM arch subsystem migration, ARM cpufreq drivers move to drivers/cpufreq. So this patch adds Kconfig.arm for ARM like x86 and adds Samsung S5PV210 and EXYNOS4210 cpufreq driver compile in there. As a note, otherw will be moved. Cc: Dave Jones <davej@redhat.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-06-02 05:18:22 +08:00
config ARM_S5PV210_CPUFREQ
bool "Samsung S5PV210 and S5PC110"
depends on CPU_S5PV210
ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y For arm S5pv210 with allmodconfig, ARM_S5PV210_CPUFREQ need CONFIG_CPU_FREQ_TABLE=y, or will cause compiling issue. The related operation: + arm-linux-gnu-ld -EL -p --no-undefined -X --build-id -X -o .tmp_vmlinux1 -T /root/linux-next/arch/arm/kernel/vmlinux.lds arch/arm/kernel/head.o init/built-in.o --start-group usr/built-in.o arch/arm/nwfpe/built-in.o arch/arm/vfp/built-in.o arch/arm/kernel/built-in.o arch/arm/mm/built-in.o arch/arm/common/built-in.o arch/arm/net/built-in.o arch/arm/crypto/built-in.o arch/arm/mach-s5pv210/built-in.o arch/arm/plat-samsung/built-in.o kernel/built-in.o mm/built-in.o fs/built-in.o ipc/built-in.o security/built-in.o crypto/built-in.o block/built-in.o arch/arm/lib/lib.a lib/lib.a arch/arm/lib/built-in.o lib/built-in.o drivers/built-in.o sound/built-in.o firmware/built-in.o net/built-in.o --end-group The related errors: drivers/built-in.o: In function `s5pv210_target': drivers/cpufreq/s5pv210-cpufreq.c:225: undefined reference to `cpufreq_frequency_table_target' drivers/cpufreq/s5pv210-cpufreq.c:237: undefined reference to `cpufreq_frequency_table_target' drivers/built-in.o: In function `s5pv210_verify_speed': drivers/cpufreq/s5pv210-cpufreq.c:182: undefined reference to `cpufreq_frequency_table_verify' drivers/built-in.o: In function `s5pv210_cpu_init': drivers/cpufreq/s5pv210-cpufreq.c:556: undefined reference to `cpufreq_frequency_table_get_attr' drivers/cpufreq/s5pv210-cpufreq.c:560: undefined reference to `cpufreq_frequency_table_cpuinfo' make: *** [vmlinux] Error 1 Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-24 19:04:48 +08:00
select CPU_FREQ_TABLE
[CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/ According to discussion of the ARM arch subsystem migration, ARM cpufreq drivers move to drivers/cpufreq. So this patch adds Kconfig.arm for ARM like x86 and adds Samsung S5PV210 and EXYNOS4210 cpufreq driver compile in there. As a note, otherw will be moved. Cc: Dave Jones <davej@redhat.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-06-02 05:18:22 +08:00
default y
help
This adds the CPUFreq driver for Samsung S5PV210 and
S5PC110 SoCs.
If in doubt, say N.
cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq This patch moves cpufreq driver of ARM based sa11x0 platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-04 20:54:16 +08:00
config ARM_SA1100_CPUFREQ
bool
config ARM_SA1110_CPUFREQ
bool
cpufreq: SPEAr: Add CPUFreq driver SPEAr is an ARM based family of SoCs. This patch adds in support of cpufreq driver for SPEAr SoCs. It is supported via DT only and so bindings are present in binding document. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27 21:05:26 +08:00
config ARM_SPEAR_CPUFREQ
bool "SPEAr CPUFreq support"
depends on PLAT_SPEAR
default y
help
This adds the CPUFreq driver support for SPEAr SOCs.
Copy Permalink