renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 22:53:55 +08:00
Code
15afa044cb
linux-next/drivers/clk/mvebu/armada-37xx-periph.c

724 lines
20 KiB
C
Raw Normal View History

clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
/*
* Marvell Armada 37xx SoC Peripheral clocks
*
* Copyright (C) 2016 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2 or later. This program is licensed "as is"
* without any warranty of any kind, whether express or implied.
*
* Most of the peripheral clocks can be modelled like this:
* _____ _______ _______
* TBG-A-P --| | | | | | ______
* TBG-B-P --| Mux |--| /div1 |--| /div2 |--| Gate |--> perip_clk
* TBG-A-S --| | | | | | |______|
* TBG-B-S --|_____| |_______| |_______|
*
* However some clocks may use only one or two block or and use the
* xtal clock as parent.
*/
#include <linux/clk-provider.h>
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
#include <linux/mfd/syscon.h>
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
#include <linux/regmap.h>
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
#include <linux/slab.h>
#define TBG_SEL 0x0
#define DIV_SEL0 0x4
#define DIV_SEL1 0x8
#define DIV_SEL2 0xC
#define CLK_SEL 0x10
#define CLK_DIS 0x14
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
#define LOAD_LEVEL_NR 4
#define ARMADA_37XX_NB_L0L1 0x18
#define ARMADA_37XX_NB_L2L3 0x1C
#define ARMADA_37XX_NB_TBG_DIV_OFF 13
#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7
#define ARMADA_37XX_NB_CLK_SEL_OFF 11
#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1
#define ARMADA_37XX_NB_TBG_SEL_OFF 9
#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3
#define ARMADA_37XX_NB_CONFIG_SHIFT 16
#define ARMADA_37XX_NB_DYN_MOD 0x24
#define ARMADA_37XX_NB_DFS_EN 31
#define ARMADA_37XX_NB_CPU_LOAD 0x30
#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3
#define ARMADA_37XX_DVFS_LOAD_0 0
#define ARMADA_37XX_DVFS_LOAD_1 1
#define ARMADA_37XX_DVFS_LOAD_2 2
#define ARMADA_37XX_DVFS_LOAD_3 3
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
struct clk_periph_driver_data {
struct clk_hw_onecell_data *hw_data;
spinlock_t lock;
};
struct clk_double_div {
struct clk_hw hw;
void __iomem *reg1;
u8 shift1;
void __iomem *reg2;
u8 shift2;
};
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
struct clk_pm_cpu {
struct clk_hw hw;
void __iomem *reg_mux;
u8 shift_mux;
u32 mask_mux;
void __iomem *reg_div;
u8 shift_div;
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
struct regmap *nb_pm_base;
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
};
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
#define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
#define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw)
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
struct clk_periph_data {
const char *name;
const char * const *parent_names;
int num_parents;
struct clk_hw *mux_hw;
struct clk_hw *rate_hw;
struct clk_hw *gate_hw;
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
struct clk_hw *muxrate_hw;
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
bool is_double_div;
};
static const struct clk_div_table clk_table6[] = {
{ .val = 1, .div = 1, },
{ .val = 2, .div = 2, },
{ .val = 3, .div = 3, },
{ .val = 4, .div = 4, },
{ .val = 5, .div = 5, },
{ .val = 6, .div = 6, },
{ .val = 0, .div = 0, }, /* last entry */
};
static const struct clk_div_table clk_table1[] = {
{ .val = 0, .div = 1, },
{ .val = 1, .div = 2, },
{ .val = 0, .div = 0, }, /* last entry */
};
static const struct clk_div_table clk_table2[] = {
{ .val = 0, .div = 2, },
{ .val = 1, .div = 4, },
{ .val = 0, .div = 0, }, /* last entry */
};
clk: mvebu: armada-37xx-periph: cosmetic changes This patches fixes few cosmetic issues such as alignment, blank lines and required space. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:27 +08:00
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
static const struct clk_ops clk_double_div_ops;
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
static const struct clk_ops clk_pm_cpu_ops;
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
#define PERIPH_GATE(_name, _bit) \
struct clk_gate gate_##_name = { \
.reg = (void *)CLK_DIS, \
.bit_idx = _bit, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_gate_ops, \
} \
};
#define PERIPH_MUX(_name, _shift) \
struct clk_mux mux_##_name = { \
.reg = (void *)TBG_SEL, \
.shift = _shift, \
.mask = 3, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_mux_ro_ops, \
} \
};
#define PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2) \
struct clk_double_div rate_##_name = { \
.reg1 = (void *)_reg1, \
.reg2 = (void *)_reg2, \
.shift1 = _shift1, \
.shift2 = _shift2, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_double_div_ops, \
} \
};
#define PERIPH_DIV(_name, _reg, _shift, _table) \
struct clk_divider rate_##_name = { \
.reg = (void *)_reg, \
.table = _table, \
.shift = _shift, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_divider_ro_ops, \
} \
};
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
#define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2) \
struct clk_pm_cpu muxrate_##_name = { \
.reg_mux = (void *)TBG_SEL, \
.mask_mux = 3, \
.shift_mux = _shift1, \
.reg_div = (void *)_reg, \
.shift_div = _shift2, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_pm_cpu_ops, \
} \
};
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
#define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\
static PERIPH_GATE(_name, _bit); \
static PERIPH_MUX(_name, _shift); \
static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
#define PERIPH_CLK_FULL(_name, _bit, _shift, _reg, _shift1, _table) \
static PERIPH_GATE(_name, _bit); \
static PERIPH_MUX(_name, _shift); \
static PERIPH_DIV(_name, _reg, _shift1, _table);
#define PERIPH_CLK_GATE_DIV(_name, _bit, _reg, _shift, _table) \
static PERIPH_GATE(_name, _bit); \
static PERIPH_DIV(_name, _reg, _shift, _table);
#define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\
static PERIPH_MUX(_name, _shift); \
static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
#define REF_CLK_FULL(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.mux_hw = &mux_##_name.hw, \
.gate_hw = &gate_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
}
#define REF_CLK_FULL_DD(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.mux_hw = &mux_##_name.hw, \
.gate_hw = &gate_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
.is_double_div = true, \
}
#define REF_CLK_GATE(_name, _parent_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ _parent_name}, \
.num_parents = 1, \
.gate_hw = &gate_##_name.hw, \
}
#define REF_CLK_GATE_DIV(_name, _parent_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ _parent_name}, \
.num_parents = 1, \
.gate_hw = &gate_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
}
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
#define REF_CLK_PM_CPU(_name) \
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
.muxrate_hw = &muxrate_##_name.hw, \
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
}
#define REF_CLK_MUX_DD(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.mux_hw = &mux_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
.is_double_div = true, \
}
/* NB periph clocks */
PERIPH_CLK_FULL_DD(mmc, 2, 0, DIV_SEL2, DIV_SEL2, 16, 13);
PERIPH_CLK_FULL_DD(sata_host, 3, 2, DIV_SEL2, DIV_SEL2, 10, 7);
PERIPH_CLK_FULL_DD(sec_at, 6, 4, DIV_SEL1, DIV_SEL1, 3, 0);
PERIPH_CLK_FULL_DD(sec_dap, 7, 6, DIV_SEL1, DIV_SEL1, 9, 6);
PERIPH_CLK_FULL_DD(tscem, 8, 8, DIV_SEL1, DIV_SEL1, 15, 12);
PERIPH_CLK_FULL(tscem_tmx, 10, 10, DIV_SEL1, 18, clk_table6);
static PERIPH_GATE(avs, 11);
PERIPH_CLK_FULL_DD(pwm, 13, 14, DIV_SEL0, DIV_SEL0, 3, 0);
PERIPH_CLK_FULL_DD(sqf, 12, 12, DIV_SEL1, DIV_SEL1, 27, 24);
static PERIPH_GATE(i2c_2, 16);
static PERIPH_GATE(i2c_1, 17);
PERIPH_CLK_GATE_DIV(ddr_phy, 19, DIV_SEL0, 18, clk_table2);
PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV_SEL0, DIV_SEL0, 15, 12);
PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6);
PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6);
PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28);
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
clk: mvebu: armada-37xx-periph: cosmetic changes This patches fixes few cosmetic issues such as alignment, blank lines and required space. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:27 +08:00
static struct clk_periph_data data_nb[] = {
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
REF_CLK_FULL_DD(mmc),
REF_CLK_FULL_DD(sata_host),
REF_CLK_FULL_DD(sec_at),
REF_CLK_FULL_DD(sec_dap),
REF_CLK_FULL_DD(tscem),
REF_CLK_FULL(tscem_tmx),
REF_CLK_GATE(avs, "xtal"),
REF_CLK_FULL_DD(sqf),
REF_CLK_FULL_DD(pwm),
REF_CLK_GATE(i2c_2, "xtal"),
REF_CLK_GATE(i2c_1, "xtal"),
REF_CLK_GATE_DIV(ddr_phy, "TBG-A-S"),
REF_CLK_FULL_DD(ddr_fclk),
REF_CLK_FULL(trace),
REF_CLK_FULL(counter),
REF_CLK_FULL_DD(eip97),
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
REF_CLK_PM_CPU(cpu),
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
{ },
};
/* SB periph clocks */
PERIPH_CLK_MUX_DD(gbe_50, 6, DIV_SEL2, DIV_SEL2, 6, 9);
PERIPH_CLK_MUX_DD(gbe_core, 8, DIV_SEL1, DIV_SEL1, 18, 21);
PERIPH_CLK_MUX_DD(gbe_125, 10, DIV_SEL1, DIV_SEL1, 6, 9);
static PERIPH_GATE(gbe1_50, 0);
static PERIPH_GATE(gbe0_50, 1);
static PERIPH_GATE(gbe1_125, 2);
static PERIPH_GATE(gbe0_125, 3);
PERIPH_CLK_GATE_DIV(gbe1_core, 4, DIV_SEL1, 13, clk_table1);
PERIPH_CLK_GATE_DIV(gbe0_core, 5, DIV_SEL1, 14, clk_table1);
PERIPH_CLK_GATE_DIV(gbe_bm, 12, DIV_SEL1, 0, clk_table1);
PERIPH_CLK_FULL_DD(sdio, 11, 14, DIV_SEL0, DIV_SEL0, 3, 6);
PERIPH_CLK_FULL_DD(usb32_usb2_sys, 16, 16, DIV_SEL0, DIV_SEL0, 9, 12);
PERIPH_CLK_FULL_DD(usb32_ss_sys, 17, 18, DIV_SEL0, DIV_SEL0, 15, 18);
static struct clk_periph_data data_sb[] = {
REF_CLK_MUX_DD(gbe_50),
REF_CLK_MUX_DD(gbe_core),
REF_CLK_MUX_DD(gbe_125),
REF_CLK_GATE(gbe1_50, "gbe_50"),
REF_CLK_GATE(gbe0_50, "gbe_50"),
REF_CLK_GATE(gbe1_125, "gbe_125"),
REF_CLK_GATE(gbe0_125, "gbe_125"),
REF_CLK_GATE_DIV(gbe1_core, "gbe_core"),
REF_CLK_GATE_DIV(gbe0_core, "gbe_core"),
REF_CLK_GATE_DIV(gbe_bm, "gbe_core"),
REF_CLK_FULL_DD(sdio),
REF_CLK_FULL_DD(usb32_usb2_sys),
REF_CLK_FULL_DD(usb32_ss_sys),
{ },
};
static unsigned int get_div(void __iomem *reg, int shift)
{
u32 val;
val = (readl(reg) >> shift) & 0x7;
if (val > 6)
return 0;
return val;
}
static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
clk: mvebu: armada-37xx-periph: cosmetic changes This patches fixes few cosmetic issues such as alignment, blank lines and required space. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:27 +08:00
unsigned long parent_rate)
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
{
struct clk_double_div *double_div = to_clk_double_div(hw);
unsigned int div;
div = get_div(double_div->reg1, double_div->shift1);
div *= get_div(double_div->reg2, double_div->shift2);
return DIV_ROUND_UP_ULL((u64)parent_rate, div);
}
static const struct clk_ops clk_double_div_ops = {
.recalc_rate = clk_double_div_recalc_rate,
};
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
static void armada_3700_pm_dvfs_update_regs(unsigned int load_level,
unsigned int *reg,
unsigned int *offset)
{
if (load_level <= ARMADA_37XX_DVFS_LOAD_1)
*reg = ARMADA_37XX_NB_L0L1;
else
*reg = ARMADA_37XX_NB_L2L3;
if (load_level == ARMADA_37XX_DVFS_LOAD_0 ||
load_level == ARMADA_37XX_DVFS_LOAD_2)
*offset += ARMADA_37XX_NB_CONFIG_SHIFT;
}
static bool armada_3700_pm_dvfs_is_enabled(struct regmap *base)
{
unsigned int val, reg = ARMADA_37XX_NB_DYN_MOD;
if (IS_ERR(base))
return false;
regmap_read(base, reg, &val);
return !!(val & BIT(ARMADA_37XX_NB_DFS_EN));
}
static unsigned int armada_3700_pm_dvfs_get_cpu_div(struct regmap *base)
{
unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
unsigned int offset = ARMADA_37XX_NB_TBG_DIV_OFF;
unsigned int load_level, div;
/*
* This function is always called after the function
* armada_3700_pm_dvfs_is_enabled, so no need to check again
* if the base is valid.
*/
regmap_read(base, reg, &load_level);
/*
* The register and the offset inside this register accessed to
* read the current divider depend on the load level
*/
load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
regmap_read(base, reg, &div);
return (div >> offset) & ARMADA_37XX_NB_TBG_DIV_MASK;
}
static unsigned int armada_3700_pm_dvfs_get_cpu_parent(struct regmap *base)
{
unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
unsigned int offset = ARMADA_37XX_NB_TBG_SEL_OFF;
unsigned int load_level, sel;
/*
* This function is always called after the function
* armada_3700_pm_dvfs_is_enabled, so no need to check again
* if the base is valid
*/
regmap_read(base, reg, &load_level);
/*
* The register and the offset inside this register accessed to
* read the current divider depend on the load level
*/
load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
regmap_read(base, reg, &sel);
return (sel >> offset) & ARMADA_37XX_NB_TBG_SEL_MASK;
}
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
{
struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
int num_parents = clk_hw_get_num_parents(hw);
u32 val;
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) {
val = armada_3700_pm_dvfs_get_cpu_parent(pm_cpu->nb_pm_base);
} else {
val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
val &= pm_cpu->mask_mux;
}
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
if (val >= num_parents)
return -EINVAL;
return val;
}
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
static int clk_pm_cpu_set_parent(struct clk_hw *hw, u8 index)
{
struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
struct regmap *base = pm_cpu->nb_pm_base;
int load_level;
/*
* We set the clock parent only if the DVFS is available but
* not enabled.
*/
if (IS_ERR(base) || armada_3700_pm_dvfs_is_enabled(base))
return -EINVAL;
/* Set the parent clock for all the load level */
for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
unsigned int reg, mask, val,
offset = ARMADA_37XX_NB_TBG_SEL_OFF;
armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
val = index << offset;
mask = ARMADA_37XX_NB_TBG_SEL_MASK << offset;
regmap_update_bits(base, reg, mask, val);
}
return 0;
}
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
unsigned int div;
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base))
div = armada_3700_pm_dvfs_get_cpu_div(pm_cpu->nb_pm_base);
else
div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
return DIV_ROUND_UP_ULL((u64)parent_rate, div);
}
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
struct regmap *base = pm_cpu->nb_pm_base;
unsigned int div = *parent_rate / rate;
unsigned int load_level;
/* only available when DVFS is enabled */
if (!armada_3700_pm_dvfs_is_enabled(base))
return -EINVAL;
for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
unsigned int reg, val, offset = ARMADA_37XX_NB_TBG_DIV_OFF;
armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
regmap_read(base, reg, &val);
val >>= offset;
val &= ARMADA_37XX_NB_TBG_DIV_MASK;
if (val == div)
/*
* We found a load level matching the target
* divider, switch to this load level and
* return.
*/
return *parent_rate / div;
}
/* We didn't find any valid divider */
return -EINVAL;
}
static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
struct regmap *base = pm_cpu->nb_pm_base;
unsigned int div = parent_rate / rate;
unsigned int load_level;
/* only available when DVFS is enabled */
if (!armada_3700_pm_dvfs_is_enabled(base))
return -EINVAL;
for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
unsigned int reg, mask, val,
offset = ARMADA_37XX_NB_TBG_DIV_OFF;
armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
regmap_read(base, reg, &val);
val >>= offset;
val &= ARMADA_37XX_NB_TBG_DIV_MASK;
if (val == div) {
/*
* We found a load level matching the target
* divider, switch to this load level and
* return.
*/
reg = ARMADA_37XX_NB_CPU_LOAD;
mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
regmap_update_bits(base, reg, mask, load_level);
return rate;
}
}
/* We didn't find any valid divider */
return -EINVAL;
}
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
static const struct clk_ops clk_pm_cpu_ops = {
.get_parent = clk_pm_cpu_get_parent,
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
.set_parent = clk_pm_cpu_set_parent,
.round_rate = clk_pm_cpu_round_rate,
.set_rate = clk_pm_cpu_set_rate,
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
.recalc_rate = clk_pm_cpu_recalc_rate,
};
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
static const struct of_device_id armada_3700_periph_clock_of_match[] = {
{ .compatible = "marvell,armada-3700-periph-clock-nb",
.data = data_nb, },
{ .compatible = "marvell,armada-3700-periph-clock-sb",
.data = data_sb, },
{ }
};
clk: mvebu: armada-37xx-periph: cosmetic changes This patches fixes few cosmetic issues such as alignment, blank lines and required space. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:27 +08:00
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
static int armada_3700_add_composite_clk(const struct clk_periph_data *data,
void __iomem *reg, spinlock_t *lock,
clk: mvebu: armada-37xx-periph: Fix the clock provider registration While trying using a peripheral clock on a driver, I saw that the clock pointer returned by the provider was NULL. The problem was a missing indirection. It was the pointer stored in the hws array which needed to be updated not the value it contains. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: 8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-29 22:28:55 +08:00
struct device *dev, struct clk_hw **hw)
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
{
const struct clk_ops *mux_ops = NULL, *gate_ops = NULL,
*rate_ops = NULL;
struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *rate_hw = NULL;
if (data->mux_hw) {
struct clk_mux *mux;
mux_hw = data->mux_hw;
mux = to_clk_mux(mux_hw);
mux->lock = lock;
mux_ops = mux_hw->init->ops;
mux->reg = reg + (u64)mux->reg;
}
if (data->gate_hw) {
struct clk_gate *gate;
gate_hw = data->gate_hw;
gate = to_clk_gate(gate_hw);
gate->lock = lock;
gate_ops = gate_hw->init->ops;
gate->reg = reg + (u64)gate->reg;
clk: mvebu: armada-37xx-periph: Fix the clock gate flag For the gate part of the peripheral clock setting the bit disables the clock and clearing it enables the clock. This is not the default behavior of clk_gate component, so we need to use the CLK_GATE_SET_TO_DISABLE flag. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: 8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-30 16:33:59 +08:00
gate->flags = CLK_GATE_SET_TO_DISABLE;
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
}
if (data->rate_hw) {
rate_hw = data->rate_hw;
rate_ops = rate_hw->init->ops;
if (data->is_double_div) {
struct clk_double_div *rate;
rate = to_clk_double_div(rate_hw);
rate->reg1 = reg + (u64)rate->reg1;
rate->reg2 = reg + (u64)rate->reg2;
} else {
struct clk_divider *rate = to_clk_divider(rate_hw);
const struct clk_div_table *clkt;
int table_size = 0;
rate->reg = reg + (u64)rate->reg;
for (clkt = rate->table; clkt->div; clkt++)
table_size++;
rate->width = order_base_2(table_size);
rate->lock = lock;
}
}
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
if (data->muxrate_hw) {
struct clk_pm_cpu *pmcpu_clk;
struct clk_hw *muxrate_hw = data->muxrate_hw;
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
struct regmap *map;
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
pmcpu_clk = to_clk_pm_cpu(muxrate_hw);
pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div;
mux_hw = muxrate_hw;
rate_hw = muxrate_hw;
mux_ops = muxrate_hw->init->ops;
rate_ops = muxrate_hw->init->ops;
clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks When DVFS is enabled the CPU clock setting is done using an other set of registers. These Power Management registers are exposed through a syscon as they will also be used by other drivers such as the cpufreq. This patch add the possibility to modify the CPU frequency using the associate load level matching the target frequency. Then all the frequency switch is handle by the hardware. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [sboyd@codeaurora.org: Grow a local variable for regmap pointer to keep lines shorter] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:29 +08:00
map = syscon_regmap_lookup_by_compatible(
"marvell,armada-3700-nb-pm");
pmcpu_clk->nb_pm_base = map;
clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS When DVFS will be enabled then the cpu clk will use a different set of register at run time. That means that we won't be able to use the common callback and need to use our own ones. This patch prepares this change by switching on our own set of callbacks without modifying the behavior of the clocks. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:28 +08:00
}
clk: mvebu: armada-37xx-periph: Fix the clock provider registration While trying using a peripheral clock on a driver, I saw that the clock pointer returned by the provider was NULL. The problem was a missing indirection. It was the pointer stored in the hws array which needed to be updated not the value it contains. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: 8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-29 22:28:55 +08:00
*hw = clk_hw_register_composite(dev, data->name, data->parent_names,
clk: mvebu: armada-37xx-periph: cosmetic changes This patches fixes few cosmetic issues such as alignment, blank lines and required space. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:27 +08:00
data->num_parents, mux_hw,
mux_ops, rate_hw, rate_ops,
gate_hw, gate_ops, CLK_IGNORE_UNUSED);
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
clk: mvebu: armada-37xx-periph: Use PTR_ERR_OR_ZERO() Fix ptr_ret.cocci warnings: drivers/clk/mvebu/armada-37xx-periph.c:362:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-29 07:04:06 +08:00
return PTR_ERR_OR_ZERO(*hw);
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
}
static int armada_3700_periph_clock_probe(struct platform_device *pdev)
{
struct clk_periph_driver_data *driver_data;
struct device_node *np = pdev->dev.of_node;
const struct clk_periph_data *data;
struct device *dev = &pdev->dev;
int num_periph = 0, i, ret;
struct resource *res;
void __iomem *reg;
data = of_device_get_match_data(dev);
if (!data)
return -ENODEV;
while (data[num_periph].name)
num_periph++;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg = devm_ioremap_resource(dev, res);
clk: mvebu: Remove redundant dev_err call in armada_3700_periph_clock_probe() There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-20 23:31:05 +08:00
if (IS_ERR(reg))
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
return PTR_ERR(reg);
driver_data = devm_kzalloc(dev, sizeof(*driver_data), GFP_KERNEL);
if (!driver_data)
return -ENOMEM;
driver_data->hw_data = devm_kzalloc(dev, sizeof(*driver_data->hw_data) +
sizeof(*driver_data->hw_data->hws) * num_periph,
GFP_KERNEL);
if (!driver_data->hw_data)
return -ENOMEM;
driver_data->hw_data->num = num_periph;
spin_lock_init(&driver_data->lock);
for (i = 0; i < num_periph; i++) {
clk: mvebu: armada-37xx-periph: Fix the clock provider registration While trying using a peripheral clock on a driver, I saw that the clock pointer returned by the provider was NULL. The problem was a missing indirection. It was the pointer stored in the hws array which needed to be updated not the value it contains. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: 8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-29 22:28:55 +08:00
struct clk_hw **hw = &driver_data->hw_data->hws[i];
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
if (armada_3700_add_composite_clk(&data[i], reg,
&driver_data->lock, dev, hw))
dev_err(dev, "Can't register periph clock %s\n",
clk: mvebu: armada-37xx-periph: cosmetic changes This patches fixes few cosmetic issues such as alignment, blank lines and required space. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:27 +08:00
data[i].name);
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
}
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
clk: mvebu: armada-37xx-periph: cosmetic changes This patches fixes few cosmetic issues such as alignment, blank lines and required space. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 21:40:27 +08:00
driver_data->hw_data);
clk: mvebu: Add the peripheral clock driver for Armada 3700 These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19 21:42:22 +08:00
if (ret) {
for (i = 0; i < num_periph; i++)
clk_hw_unregister(driver_data->hw_data->hws[i]);
return ret;
}
platform_set_drvdata(pdev, driver_data);
return 0;
}
static int armada_3700_periph_clock_remove(struct platform_device *pdev)
{
struct clk_periph_driver_data *data = platform_get_drvdata(pdev);
struct clk_hw_onecell_data *hw_data = data->hw_data;
int i;
of_clk_del_provider(pdev->dev.of_node);
for (i = 0; i < hw_data->num; i++)
clk_hw_unregister(hw_data->hws[i]);
return 0;
}
static struct platform_driver armada_3700_periph_clock_driver = {
.probe = armada_3700_periph_clock_probe,
.remove = armada_3700_periph_clock_remove,
.driver = {
.name = "marvell-armada-3700-periph-clock",
.of_match_table = armada_3700_periph_clock_of_match,
},
};
builtin_platform_driver(armada_3700_periph_clock_driver);
Copy Permalink