2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
linux-next/drivers/clocksource/arm_arch_timer.c

795 lines
20 KiB
C
Raw Normal View History

/*
* linux/drivers/clocksource/arm_arch_timer.c
*
* Copyright (C) 2011 ARM Ltd.
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/sched_clock.h>
#include <asm/arch_timer.h>
#include <asm/virt.h>
#include <clocksource/arm_arch_timer.h>
#define CNTTIDR 0x08
#define CNTTIDR_VIRT(n) (BIT(1) << ((n) * 4))
#define CNTVCT_LO 0x08
#define CNTVCT_HI 0x0c
#define CNTFRQ 0x10
#define CNTP_TVAL 0x28
#define CNTP_CTL 0x2c
#define CNTV_TVAL 0x38
#define CNTV_CTL 0x3c
#define ARCH_CP15_TIMER BIT(0)
#define ARCH_MEM_TIMER BIT(1)
static unsigned arch_timers_present __initdata;
static void __iomem *arch_counter_base;
struct arch_timer {
void __iomem *base;
struct clock_event_device evt;
};
#define to_arch_timer(e) container_of(e, struct arch_timer, evt)
static u32 arch_timer_rate;
enum ppi_nr {
PHYS_SECURE_PPI,
PHYS_NONSECURE_PPI,
VIRT_PPI,
HYP_PPI,
MAX_TIMER_PPI
};
static int arch_timer_ppi[MAX_TIMER_PPI];
static struct clock_event_device __percpu *arch_timer_evt;
static bool arch_timer_use_virtual = true;
clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue ARM arch timers are tightly coupled with the CPU logic and lose context on platform implementing HW power management when cores are powered down at run-time. Marking the arch timers as C3STOP regardless of power management capabilities causes issues on platforms with no power management, since in that case the arch timers cannot possibly enter states where the timer loses context at runtime and therefore can always be used as a high resolution clockevent device. In order to fix the C3STOP issue in a way compliant with how real HW works, this patch adds a boolean property to the arch timer bindings to define if the arch timer is managed by an always-on power domain. This power domain is present on all ARM platforms to date, and manages HW that must not be turned off, whatever the state of other HW components (eg power controller). On platforms with no power management capabilities, it is the only power domain present, which encompasses and manages power supply for all HW components in the system. If the timer is powered by the always-on power domain, the always-on property must be present in the bindings which means that the timer cannot be shutdown at runtime, so it is not a C3STOP clockevent device. If the timer binding does not contain the always-on property, the timer is assumed to be power-gateable, hence it must be defined as a C3STOP clockevent device. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Magnus Damm <damm@opensource.se> Cc: Marc Carino <marc.ceeeee@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-04-08 17:04:32 +08:00
static bool arch_timer_c3stop;
static bool arch_timer_mem_use_virtual;
/*
* Architected system timer support.
*/
static __always_inline
void arch_timer_reg_write(int access, enum arch_timer_reg reg, u32 val,
struct clock_event_device *clk)
{
if (access == ARCH_TIMER_MEM_PHYS_ACCESS) {
struct arch_timer *timer = to_arch_timer(clk);
switch (reg) {
case ARCH_TIMER_REG_CTRL:
writel_relaxed(val, timer->base + CNTP_CTL);
break;
case ARCH_TIMER_REG_TVAL:
writel_relaxed(val, timer->base + CNTP_TVAL);
break;
}
} else if (access == ARCH_TIMER_MEM_VIRT_ACCESS) {
struct arch_timer *timer = to_arch_timer(clk);
switch (reg) {
case ARCH_TIMER_REG_CTRL:
writel_relaxed(val, timer->base + CNTV_CTL);
break;
case ARCH_TIMER_REG_TVAL:
writel_relaxed(val, timer->base + CNTV_TVAL);
break;
}
} else {
arch_timer_reg_write_cp15(access, reg, val);
}
}
static __always_inline
u32 arch_timer_reg_read(int access, enum arch_timer_reg reg,
struct clock_event_device *clk)
{
u32 val;
if (access == ARCH_TIMER_MEM_PHYS_ACCESS) {
struct arch_timer *timer = to_arch_timer(clk);
switch (reg) {
case ARCH_TIMER_REG_CTRL:
val = readl_relaxed(timer->base + CNTP_CTL);
break;
case ARCH_TIMER_REG_TVAL:
val = readl_relaxed(timer->base + CNTP_TVAL);
break;
}
} else if (access == ARCH_TIMER_MEM_VIRT_ACCESS) {
struct arch_timer *timer = to_arch_timer(clk);
switch (reg) {
case ARCH_TIMER_REG_CTRL:
val = readl_relaxed(timer->base + CNTV_CTL);
break;
case ARCH_TIMER_REG_TVAL:
val = readl_relaxed(timer->base + CNTV_TVAL);
break;
}
} else {
val = arch_timer_reg_read_cp15(access, reg);
}
return val;
}
static __always_inline irqreturn_t timer_handler(const int access,
struct clock_event_device *evt)
{
unsigned long ctrl;
ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, evt);
if (ctrl & ARCH_TIMER_CTRL_IT_STAT) {
ctrl |= ARCH_TIMER_CTRL_IT_MASK;
arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, evt);
evt->event_handler(evt);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static irqreturn_t arch_timer_handler_virt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
return timer_handler(ARCH_TIMER_VIRT_ACCESS, evt);
}
static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt);
}
static irqreturn_t arch_timer_handler_phys_mem(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
return timer_handler(ARCH_TIMER_MEM_PHYS_ACCESS, evt);
}
static irqreturn_t arch_timer_handler_virt_mem(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
return timer_handler(ARCH_TIMER_MEM_VIRT_ACCESS, evt);
}
static __always_inline void timer_set_mode(const int access, int mode,
struct clock_event_device *clk)
{
unsigned long ctrl;
switch (mode) {
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
break;
default:
break;
}
}
static void arch_timer_set_mode_virt(enum clock_event_mode mode,
struct clock_event_device *clk)
{
timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode, clk);
}
static void arch_timer_set_mode_phys(enum clock_event_mode mode,
struct clock_event_device *clk)
{
timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode, clk);
}
static void arch_timer_set_mode_virt_mem(enum clock_event_mode mode,
struct clock_event_device *clk)
{
timer_set_mode(ARCH_TIMER_MEM_VIRT_ACCESS, mode, clk);
}
static void arch_timer_set_mode_phys_mem(enum clock_event_mode mode,
struct clock_event_device *clk)
{
timer_set_mode(ARCH_TIMER_MEM_PHYS_ACCESS, mode, clk);
}
static __always_inline void set_next_event(const int access, unsigned long evt,
struct clock_event_device *clk)
{
unsigned long ctrl;
ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
ctrl |= ARCH_TIMER_CTRL_ENABLE;
ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
arch_timer_reg_write(access, ARCH_TIMER_REG_TVAL, evt, clk);
arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
}
static int arch_timer_set_next_event_virt(unsigned long evt,
struct clock_event_device *clk)
{
set_next_event(ARCH_TIMER_VIRT_ACCESS, evt, clk);
return 0;
}
static int arch_timer_set_next_event_phys(unsigned long evt,
struct clock_event_device *clk)
{
set_next_event(ARCH_TIMER_PHYS_ACCESS, evt, clk);
return 0;
}
static int arch_timer_set_next_event_virt_mem(unsigned long evt,
struct clock_event_device *clk)
{
set_next_event(ARCH_TIMER_MEM_VIRT_ACCESS, evt, clk);
return 0;
}
static int arch_timer_set_next_event_phys_mem(unsigned long evt,
struct clock_event_device *clk)
{
set_next_event(ARCH_TIMER_MEM_PHYS_ACCESS, evt, clk);
return 0;
}
static void __arch_timer_setup(unsigned type,
struct clock_event_device *clk)
{
clk->features = CLOCK_EVT_FEAT_ONESHOT;
if (type == ARCH_CP15_TIMER) {
clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue ARM arch timers are tightly coupled with the CPU logic and lose context on platform implementing HW power management when cores are powered down at run-time. Marking the arch timers as C3STOP regardless of power management capabilities causes issues on platforms with no power management, since in that case the arch timers cannot possibly enter states where the timer loses context at runtime and therefore can always be used as a high resolution clockevent device. In order to fix the C3STOP issue in a way compliant with how real HW works, this patch adds a boolean property to the arch timer bindings to define if the arch timer is managed by an always-on power domain. This power domain is present on all ARM platforms to date, and manages HW that must not be turned off, whatever the state of other HW components (eg power controller). On platforms with no power management capabilities, it is the only power domain present, which encompasses and manages power supply for all HW components in the system. If the timer is powered by the always-on power domain, the always-on property must be present in the bindings which means that the timer cannot be shutdown at runtime, so it is not a C3STOP clockevent device. If the timer binding does not contain the always-on property, the timer is assumed to be power-gateable, hence it must be defined as a C3STOP clockevent device. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Magnus Damm <damm@opensource.se> Cc: Marc Carino <marc.ceeeee@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-04-08 17:04:32 +08:00
if (arch_timer_c3stop)
clk->features |= CLOCK_EVT_FEAT_C3STOP;
clk->name = "arch_sys_timer";
clk->rating = 450;
clk->cpumask = cpumask_of(smp_processor_id());
if (arch_timer_use_virtual) {
clk->irq = arch_timer_ppi[VIRT_PPI];
clk->set_mode = arch_timer_set_mode_virt;
clk->set_next_event = arch_timer_set_next_event_virt;
} else {
clk->irq = arch_timer_ppi[PHYS_SECURE_PPI];
clk->set_mode = arch_timer_set_mode_phys;
clk->set_next_event = arch_timer_set_next_event_phys;
}
} else {
clk->features |= CLOCK_EVT_FEAT_DYNIRQ;
clk->name = "arch_mem_timer";
clk->rating = 400;
clk->cpumask = cpu_all_mask;
if (arch_timer_mem_use_virtual) {
clk->set_mode = arch_timer_set_mode_virt_mem;
clk->set_next_event =
arch_timer_set_next_event_virt_mem;
} else {
clk->set_mode = arch_timer_set_mode_phys_mem;
clk->set_next_event =
arch_timer_set_next_event_phys_mem;
}
}
clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, clk);
clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff);
}
static void arch_timer_evtstrm_enable(int divider)
{
u32 cntkctl = arch_timer_get_cntkctl();
cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
/* Set the divider and enable virtual event stream */
cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
| ARCH_TIMER_VIRT_EVT_EN;
arch_timer_set_cntkctl(cntkctl);
elf_hwcap |= HWCAP_EVTSTRM;
#ifdef CONFIG_COMPAT
compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
#endif
}
static void arch_timer_configure_evtstream(void)
{
int evt_stream_div, pos;
/* Find the closest power of two to the divisor */
evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ;
pos = fls(evt_stream_div);
if (pos > 1 && !(evt_stream_div & (1 << (pos - 2))))
pos--;
/* enable event stream */
arch_timer_evtstrm_enable(min(pos, 15));
}
static void arch_counter_set_user_access(void)
{
u32 cntkctl = arch_timer_get_cntkctl();
/* Disable user access to the timers and the physical counter */
/* Also disable virtual event stream */
cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
| ARCH_TIMER_USR_VT_ACCESS_EN
| ARCH_TIMER_VIRT_EVT_EN
| ARCH_TIMER_USR_PCT_ACCESS_EN);
/* Enable user access to the virtual counter */
cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN;
arch_timer_set_cntkctl(cntkctl);
}
static int arch_timer_setup(struct clock_event_device *clk)
{
__arch_timer_setup(ARCH_CP15_TIMER, clk);
if (arch_timer_use_virtual)
enable_percpu_irq(arch_timer_ppi[VIRT_PPI], 0);
else {
enable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], 0);
if (arch_timer_ppi[PHYS_NONSECURE_PPI])
enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0);
}
arch_counter_set_user_access();
if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM))
arch_timer_configure_evtstream();
return 0;
}
static void
arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
{
/* Who has more than one independent system counter? */
if (arch_timer_rate)
return;
/* Try to determine the frequency from the device tree or CNTFRQ */
if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
if (cntbase)
arch_timer_rate = readl_relaxed(cntbase + CNTFRQ);
else
arch_timer_rate = arch_timer_get_cntfrq();
}
/* Check the timer frequency. */
if (arch_timer_rate == 0)
pr_warn("Architected timer frequency not available\n");
}
static void arch_timer_banner(unsigned type)
{
pr_info("Architected %s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
type & ARCH_CP15_TIMER ? "cp15" : "",
type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
type & ARCH_MEM_TIMER ? "mmio" : "",
(unsigned long)arch_timer_rate / 1000000,
(unsigned long)(arch_timer_rate / 10000) % 100,
type & ARCH_CP15_TIMER ?
arch_timer_use_virtual ? "virt" : "phys" :
"",
type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
type & ARCH_MEM_TIMER ?
arch_timer_mem_use_virtual ? "virt" : "phys" :
"");
}
u32 arch_timer_get_rate(void)
{
return arch_timer_rate;
}
static u64 arch_counter_get_cntvct_mem(void)
{
u32 vct_lo, vct_hi, tmp_hi;
do {
vct_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
vct_lo = readl_relaxed(arch_counter_base + CNTVCT_LO);
tmp_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
} while (vct_hi != tmp_hi);
return ((u64) vct_hi << 32) | vct_lo;
}
/*
* Default to cp15 based access because arm64 uses this function for
* sched_clock() before DT is probed and the cp15 method is guaranteed
* to exist on arm64. arm doesn't use this before DT is probed so even
* if we don't have the cp15 accessors we won't have a problem.
*/
u64 (*arch_timer_read_counter)(void) = arch_counter_get_cntvct;
static cycle_t arch_counter_read(struct clocksource *cs)
{
return arch_timer_read_counter();
}
static cycle_t arch_counter_read_cc(const struct cyclecounter *cc)
{
return arch_timer_read_counter();
}
static struct clocksource clocksource_counter = {
.name = "arch_sys_counter",
.rating = 400,
.read = arch_counter_read,
.mask = CLOCKSOURCE_MASK(56),
.flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
};
static struct cyclecounter cyclecounter = {
.read = arch_counter_read_cc,
.mask = CLOCKSOURCE_MASK(56),
};
static struct timecounter timecounter;
struct timecounter *arch_timer_get_timecounter(void)
{
return &timecounter;
}
static void __init arch_counter_register(unsigned type)
{
u64 start_count;
/* Register the CP15 based counter if we have one */
if (type & ARCH_CP15_TIMER) {
arch_timer_read_counter = arch_counter_get_cntvct;
} else {
arch_timer_read_counter = arch_counter_get_cntvct_mem;
/* If the clocksource name is "arch_sys_counter" the
* VDSO will attempt to read the CP15-based counter.
* Ensure this does not happen when CP15-based
* counter is not available.
*/
clocksource_counter.name = "arch_mem_counter";
}
start_count = arch_timer_read_counter();
clocksource_register_hz(&clocksource_counter, arch_timer_rate);
cyclecounter.mult = clocksource_counter.mult;
cyclecounter.shift = clocksource_counter.shift;
timecounter_init(&timecounter, &cyclecounter, start_count);
/* 56 bits minimum, so we assume worst case rollover */
sched_clock_register(arch_timer_read_counter, 56, arch_timer_rate);
}
static void arch_timer_stop(struct clock_event_device *clk)
{
pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
clk->irq, smp_processor_id());
if (arch_timer_use_virtual)
disable_percpu_irq(arch_timer_ppi[VIRT_PPI]);
else {
disable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI]);
if (arch_timer_ppi[PHYS_NONSECURE_PPI])
disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]);
}
clk->set_mode(CLOCK_EVT_MODE_UNUSED, clk);
}
static int arch_timer_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
/*
* Grab cpu pointer in each case to avoid spurious
* preemptible warnings
*/
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_STARTING:
arch_timer_setup(this_cpu_ptr(arch_timer_evt));
break;
case CPU_DYING:
arch_timer_stop(this_cpu_ptr(arch_timer_evt));
break;
}
return NOTIFY_OK;
}
static struct notifier_block arch_timer_cpu_nb = {
.notifier_call = arch_timer_cpu_notify,
};
#ifdef CONFIG_CPU_PM
static unsigned int saved_cntkctl;
static int arch_timer_cpu_pm_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
if (action == CPU_PM_ENTER)
saved_cntkctl = arch_timer_get_cntkctl();
else if (action == CPU_PM_ENTER_FAILED || action == CPU_PM_EXIT)
arch_timer_set_cntkctl(saved_cntkctl);
return NOTIFY_OK;
}
static struct notifier_block arch_timer_cpu_pm_notifier = {
.notifier_call = arch_timer_cpu_pm_notify,
};
static int __init arch_timer_cpu_pm_init(void)
{
return cpu_pm_register_notifier(&arch_timer_cpu_pm_notifier);
}
#else
static int __init arch_timer_cpu_pm_init(void)
{
return 0;
}
#endif
static int __init arch_timer_register(void)
{
int err;
int ppi;
arch_timer_evt = alloc_percpu(struct clock_event_device);
if (!arch_timer_evt) {
err = -ENOMEM;
goto out;
}
if (arch_timer_use_virtual) {
ppi = arch_timer_ppi[VIRT_PPI];
err = request_percpu_irq(ppi, arch_timer_handler_virt,
"arch_timer", arch_timer_evt);
} else {
ppi = arch_timer_ppi[PHYS_SECURE_PPI];
err = request_percpu_irq(ppi, arch_timer_handler_phys,
"arch_timer", arch_timer_evt);
if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) {
ppi = arch_timer_ppi[PHYS_NONSECURE_PPI];
err = request_percpu_irq(ppi, arch_timer_handler_phys,
"arch_timer", arch_timer_evt);
if (err)
free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
arch_timer_evt);
}
}
if (err) {
pr_err("arch_timer: can't register interrupt %d (%d)\n",
ppi, err);
goto out_free;
}
err = register_cpu_notifier(&arch_timer_cpu_nb);
if (err)
goto out_free_irq;
err = arch_timer_cpu_pm_init();
if (err)
goto out_unreg_notify;
/* Immediately configure the timer on the boot CPU */
arch_timer_setup(this_cpu_ptr(arch_timer_evt));
return 0;
out_unreg_notify:
unregister_cpu_notifier(&arch_timer_cpu_nb);
out_free_irq:
if (arch_timer_use_virtual)
free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt);
else {
free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
arch_timer_evt);
if (arch_timer_ppi[PHYS_NONSECURE_PPI])
free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI],
arch_timer_evt);
}
out_free:
free_percpu(arch_timer_evt);
out:
return err;
}
static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
{
int ret;
irq_handler_t func;
struct arch_timer *t;
t = kzalloc(sizeof(*t), GFP_KERNEL);
if (!t)
return -ENOMEM;
t->base = base;
t->evt.irq = irq;
__arch_timer_setup(ARCH_MEM_TIMER, &t->evt);
if (arch_timer_mem_use_virtual)
func = arch_timer_handler_virt_mem;
else
func = arch_timer_handler_phys_mem;
ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &t->evt);
if (ret) {
pr_err("arch_timer: Failed to request mem timer irq\n");
kfree(t);
}
return ret;
}
static const struct of_device_id arch_timer_of_match[] __initconst = {
{ .compatible = "arm,armv7-timer", },
{ .compatible = "arm,armv8-timer", },
{},
};
static const struct of_device_id arch_timer_mem_of_match[] __initconst = {
{ .compatible = "arm,armv7-timer-mem", },
{},
};
static bool __init
arch_timer_probed(int type, const struct of_device_id *matches)
{
struct device_node *dn;
bool probed = false;
dn = of_find_matching_node(NULL, matches);
if (dn && of_device_is_available(dn) && (arch_timers_present & type))
probed = true;
of_node_put(dn);
return probed;
}
static void __init arch_timer_common_init(void)
{
unsigned mask = ARCH_CP15_TIMER | ARCH_MEM_TIMER;
/* Wait until both nodes are probed if we have two timers */
if ((arch_timers_present & mask) != mask) {
if (!arch_timer_probed(ARCH_MEM_TIMER, arch_timer_mem_of_match))
return;
if (!arch_timer_probed(ARCH_CP15_TIMER, arch_timer_of_match))
return;
}
arch_timer_banner(arch_timers_present);
arch_counter_register(arch_timers_present);
arch_timer_arch_init();
}
static void __init arch_timer_init(struct device_node *np)
{
int i;
if (arch_timers_present & ARCH_CP15_TIMER) {
pr_warn("arch_timer: multiple nodes in dt, skipping\n");
return;
}
arch_timers_present |= ARCH_CP15_TIMER;
for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
arch_timer_detect_rate(NULL, np);
/*
* If HYP mode is available, we know that the physical timer
* has been configured to be accessible from PL1. Use it, so
* that a guest can use the virtual timer instead.
*
* If no interrupt provided for virtual timer, we'll have to
* stick to the physical timer. It'd better be accessible...
*/
if (is_hyp_mode_available() || !arch_timer_ppi[VIRT_PPI]) {
arch_timer_use_virtual = false;
if (!arch_timer_ppi[PHYS_SECURE_PPI] ||
!arch_timer_ppi[PHYS_NONSECURE_PPI]) {
pr_warn("arch_timer: No interrupt available, giving up\n");
return;
}
}
clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue ARM arch timers are tightly coupled with the CPU logic and lose context on platform implementing HW power management when cores are powered down at run-time. Marking the arch timers as C3STOP regardless of power management capabilities causes issues on platforms with no power management, since in that case the arch timers cannot possibly enter states where the timer loses context at runtime and therefore can always be used as a high resolution clockevent device. In order to fix the C3STOP issue in a way compliant with how real HW works, this patch adds a boolean property to the arch timer bindings to define if the arch timer is managed by an always-on power domain. This power domain is present on all ARM platforms to date, and manages HW that must not be turned off, whatever the state of other HW components (eg power controller). On platforms with no power management capabilities, it is the only power domain present, which encompasses and manages power supply for all HW components in the system. If the timer is powered by the always-on power domain, the always-on property must be present in the bindings which means that the timer cannot be shutdown at runtime, so it is not a C3STOP clockevent device. If the timer binding does not contain the always-on property, the timer is assumed to be power-gateable, hence it must be defined as a C3STOP clockevent device. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Magnus Damm <damm@opensource.se> Cc: Marc Carino <marc.ceeeee@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-04-08 17:04:32 +08:00
arch_timer_c3stop = !of_property_read_bool(np, "always-on");
arch_timer_register();
arch_timer_common_init();
}
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init);
CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init);
static void __init arch_timer_mem_init(struct device_node *np)
{
struct device_node *frame, *best_frame = NULL;
void __iomem *cntctlbase, *base;
unsigned int irq;
u32 cnttidr;
arch_timers_present |= ARCH_MEM_TIMER;
cntctlbase = of_iomap(np, 0);
if (!cntctlbase) {
pr_err("arch_timer: Can't find CNTCTLBase\n");
return;
}
cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
iounmap(cntctlbase);
/*
* Try to find a virtual capable frame. Otherwise fall back to a
* physical capable frame.
*/
for_each_available_child_of_node(np, frame) {
int n;
if (of_property_read_u32(frame, "frame-number", &n)) {
pr_err("arch_timer: Missing frame-number\n");
of_node_put(best_frame);
of_node_put(frame);
return;
}
if (cnttidr & CNTTIDR_VIRT(n)) {
of_node_put(best_frame);
best_frame = frame;
arch_timer_mem_use_virtual = true;
break;
}
of_node_put(best_frame);
best_frame = of_node_get(frame);
}
base = arch_counter_base = of_iomap(best_frame, 0);
if (!base) {
pr_err("arch_timer: Can't map frame's registers\n");
of_node_put(best_frame);
return;
}
if (arch_timer_mem_use_virtual)
irq = irq_of_parse_and_map(best_frame, 1);
else
irq = irq_of_parse_and_map(best_frame, 0);
of_node_put(best_frame);
if (!irq) {
pr_err("arch_timer: Frame missing %s irq",
arch_timer_mem_use_virtual ? "virt" : "phys");
return;
}
arch_timer_detect_rate(base, np);
arch_timer_mem_register(base, irq);
arch_timer_common_init();
}
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
arch_timer_mem_init);