renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2025-01-10 06:34:17 +08:00
Code
0a3eba3ad6
linux-next/drivers/tty/serial/amba-pl011.h

35 lines
426 B
C
Raw Normal View History

tty: amba-pl011: prepare REG_* register indexes Prepare for REG_* register accessors. This change involves introducing pl011_reg_to_offset() to convert REG_* to the hardware register offset, and converting all call sites to use REG_* names. We need to fix up locations where we check for equivalence of register offsets as well. Much of this change was made via these sed expressions: s/ST_UART01[1x]\(_[^_]*\|_LCRH_[TR]X\)\>/REG_ST\1/ s/UART01[1x]_\(DR\|RSR\|ECR\|FR\|ILPR\|[IF]BRD\|LCRH\|CR\|IFLS\|IMSC\|RIS\|MIS\|ICR\|DMACR\)\>/REG_\1/g Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-03 22:51:13 +08:00
#ifndef AMBA_PL011_H
#define AMBA_PL011_H
enum {
tty: amba-pl011: add register lookup table Add a register lookup table, which allows the register offsets to be adjusted on a per-port basis. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-17 01:40:26 +08:00
REG_DR,
REG_ST_DMAWM,
REG_ST_TIMEOUT,
REG_FR,
tty: amba-pl011: clean up LCR register offsets As we can detect when the LCR register is split between TX and RX, we don't need three entries in the table to deal with this. Reduce this down to two entries by converting the REG_ST_LCRH_* entries to standard REG_LCRH_* and remove REG_LCRH. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-17 01:40:41 +08:00
REG_LCRH_RX,
REG_LCRH_TX,
tty: amba-pl011: add register lookup table Add a register lookup table, which allows the register offsets to be adjusted on a per-port basis. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-17 01:40:26 +08:00
REG_IBRD,
REG_FBRD,
REG_CR,
REG_IFLS,
REG_IMSC,
REG_RIS,
REG_MIS,
REG_ICR,
REG_DMACR,
REG_ST_XFCR,
REG_ST_XON1,
REG_ST_XON2,
REG_ST_XOFF1,
REG_ST_XOFF2,
REG_ST_ITCR,
REG_ST_ITIP,
REG_ST_ABCR,
REG_ST_ABIMSC,
/* The size of the array - must be last */
REG_ARRAY_SIZE,
tty: amba-pl011: prepare REG_* register indexes Prepare for REG_* register accessors. This change involves introducing pl011_reg_to_offset() to convert REG_* to the hardware register offset, and converting all call sites to use REG_* names. We need to fix up locations where we check for equivalence of register offsets as well. Much of this change was made via these sed expressions: s/ST_UART01[1x]\(_[^_]*\|_LCRH_[TR]X\)\>/REG_ST\1/ s/UART01[1x]_\(DR\|RSR\|ECR\|FR\|ILPR\|[IF]BRD\|LCRH\|CR\|IFLS\|IMSC\|RIS\|MIS\|ICR\|DMACR\)\>/REG_\1/g Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-03 22:51:13 +08:00
};
#endif
Copy Permalink