2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 04:03:58 +08:00
linux-next/drivers/mmc/host/pxamci.c

733 lines
16 KiB
C
Raw Normal View History

/*
* linux/drivers/mmc/host/pxa.c - PXA MMCI driver
*
* Copyright (C) 2003 Russell King, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This hardware is really sick:
* - No way to clear interrupts.
* - Have to turn off the clock whenever we touch the device.
* - Doesn't tell you how many data blocks were transferred.
* Yuck!
*
* 1 and 3 byte data transfers not supported
* max block length up to 1023
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mmc/host.h>
#include <linux/io.h>
#include <asm/sizes.h>
#include <mach/dma.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/mmc.h>
#include "pxamci.h"
#define DRIVER_NAME "pxa2xx-mci"
#define NR_SG 1
#define CLKRT_OFF (~0)
struct pxamci_host {
struct mmc_host *mmc;
spinlock_t lock;
struct resource *res;
void __iomem *base;
struct clk *clk;
unsigned long clkrate;
int irq;
int dma;
unsigned int clkrt;
unsigned int cmdat;
unsigned int imask;
unsigned int power_mode;
struct pxamci_platform_data *pdata;
struct mmc_request *mrq;
struct mmc_command *cmd;
struct mmc_data *data;
dma_addr_t sg_dma;
struct pxa_dma_desc *sg_cpu;
unsigned int dma_len;
unsigned int dma_dir;
unsigned int dma_drcmrrx;
unsigned int dma_drcmrtx;
};
static void pxamci_stop_clock(struct pxamci_host *host)
{
if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
unsigned long timeout = 10000;
unsigned int v;
writel(STOP_CLOCK, host->base + MMC_STRPCL);
do {
v = readl(host->base + MMC_STAT);
if (!(v & STAT_CLK_EN))
break;
udelay(1);
} while (timeout--);
if (v & STAT_CLK_EN)
dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
}
}
static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
{
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
host->imask &= ~mask;
writel(host->imask, host->base + MMC_I_MASK);
spin_unlock_irqrestore(&host->lock, flags);
}
static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
{
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
host->imask |= mask;
writel(host->imask, host->base + MMC_I_MASK);
spin_unlock_irqrestore(&host->lock, flags);
}
static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
{
unsigned int nob = data->blocks;
unsigned long long clks;
unsigned int timeout;
bool dalgn = 0;
u32 dcmd;
int i;
host->data = data;
if (data->flags & MMC_DATA_STREAM)
nob = 0xffff;
writel(nob, host->base + MMC_NOB);
writel(data->blksz, host->base + MMC_BLKLEN);
clks = (unsigned long long)data->timeout_ns * host->clkrate;
do_div(clks, 1000000000UL);
timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
writel((timeout + 255) / 256, host->base + MMC_RDTO);
if (data->flags & MMC_DATA_READ) {
host->dma_dir = DMA_FROM_DEVICE;
dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
DRCMR(host->dma_drcmrtx) = 0;
DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
} else {
host->dma_dir = DMA_TO_DEVICE;
dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
DRCMR(host->dma_drcmrrx) = 0;
DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
}
dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
host->dma_dir);
for (i = 0; i < host->dma_len; i++) {
unsigned int length = sg_dma_len(&data->sg[i]);
host->sg_cpu[i].dcmd = dcmd | length;
if (length & 31 && !(data->flags & MMC_DATA_READ))
host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
/* Not aligned to 8-byte boundary? */
if (sg_dma_address(&data->sg[i]) & 0x7)
dalgn = 1;
if (data->flags & MMC_DATA_READ) {
host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
} else {
host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]);
host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO;
}
host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) *
sizeof(struct pxa_dma_desc);
}
host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
wmb();
/*
* The PXA27x DMA controller encounters overhead when working with
* unaligned (to 8-byte boundaries) data, so switch on byte alignment
* mode only if we have unaligned data.
*/
if (dalgn)
DALGN |= (1 << host->dma);
else
DALGN &= ~(1 << host->dma);
DDADR(host->dma) = host->sg_dma;
DCSR(host->dma) = DCSR_RUN;
}
static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
{
WARN_ON(host->cmd != NULL);
host->cmd = cmd;
if (cmd->flags & MMC_RSP_BUSY)
cmdat |= CMDAT_BUSY;
#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
switch (RSP_TYPE(mmc_resp_type(cmd))) {
case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
cmdat |= CMDAT_RESP_SHORT;
break;
case RSP_TYPE(MMC_RSP_R3):
cmdat |= CMDAT_RESP_R3;
break;
case RSP_TYPE(MMC_RSP_R2):
cmdat |= CMDAT_RESP_R2;
break;
default:
break;
}
writel(cmd->opcode, host->base + MMC_CMD);
writel(cmd->arg >> 16, host->base + MMC_ARGH);
writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
writel(cmdat, host->base + MMC_CMDAT);
writel(host->clkrt, host->base + MMC_CLKRT);
writel(START_CLOCK, host->base + MMC_STRPCL);
pxamci_enable_irq(host, END_CMD_RES);
}
static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
{
host->mrq = NULL;
host->cmd = NULL;
host->data = NULL;
mmc_request_done(host->mmc, mrq);
}
static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
{
struct mmc_command *cmd = host->cmd;
int i;
u32 v;
if (!cmd)
return 0;
host->cmd = NULL;
/*
* Did I mention this is Sick. We always need to
* discard the upper 8 bits of the first 16-bit word.
*/
v = readl(host->base + MMC_RES) & 0xffff;
for (i = 0; i < 4; i++) {
u32 w1 = readl(host->base + MMC_RES) & 0xffff;
u32 w2 = readl(host->base + MMC_RES) & 0xffff;
cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
v = w2;
}
if (stat & STAT_TIME_OUT_RESPONSE) {
cmd->error = -ETIMEDOUT;
} else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
#ifdef CONFIG_PXA27x
/*
* workaround for erratum #42:
* Intel PXA27x Family Processor Specification Update Rev 001
* A bogus CRC error can appear if the msb of a 136 bit
* response is a one.
*/
if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) {
pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
} else
#endif
cmd->error = -EILSEQ;
}
pxamci_disable_irq(host, END_CMD_RES);
if (host->data && !cmd->error) {
pxamci_enable_irq(host, DATA_TRAN_DONE);
} else {
pxamci_finish_request(host, host->mrq);
}
return 1;
}
static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
{
struct mmc_data *data = host->data;
if (!data)
return 0;
DCSR(host->dma) = 0;
dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
host->dma_dir);
if (stat & STAT_READ_TIME_OUT)
data->error = -ETIMEDOUT;
else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
data->error = -EILSEQ;
/*
* There appears to be a hardware design bug here. There seems to
* be no way to find out how much data was transferred to the card.
* This means that if there was an error on any block, we mark all
* data blocks as being in error.
*/
if (!data->error)
data->bytes_xfered = data->blocks * data->blksz;
else
data->bytes_xfered = 0;
pxamci_disable_irq(host, DATA_TRAN_DONE);
host->data = NULL;
if (host->mrq->stop) {
pxamci_stop_clock(host);
pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
} else {
pxamci_finish_request(host, host->mrq);
}
return 1;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t pxamci_irq(int irq, void *devid)
{
struct pxamci_host *host = devid;
unsigned int ireg;
int handled = 0;
ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK);
if (ireg) {
unsigned stat = readl(host->base + MMC_STAT);
pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
if (ireg & END_CMD_RES)
handled |= pxamci_cmd_done(host, stat);
if (ireg & DATA_TRAN_DONE)
handled |= pxamci_data_done(host, stat);
if (ireg & SDIO_INT) {
mmc_signal_sdio_irq(host->mmc);
handled = 1;
}
}
return IRQ_RETVAL(handled);
}
static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct pxamci_host *host = mmc_priv(mmc);
unsigned int cmdat;
WARN_ON(host->mrq != NULL);
host->mrq = mrq;
pxamci_stop_clock(host);
cmdat = host->cmdat;
host->cmdat &= ~CMDAT_INIT;
if (mrq->data) {
pxamci_setup_data(host, mrq->data);
cmdat &= ~CMDAT_BUSY;
cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
if (mrq->data->flags & MMC_DATA_WRITE)
cmdat |= CMDAT_WRITE;
if (mrq->data->flags & MMC_DATA_STREAM)
cmdat |= CMDAT_STREAM;
}
pxamci_start_cmd(host, mrq->cmd, cmdat);
}
static int pxamci_get_ro(struct mmc_host *mmc)
{
struct pxamci_host *host = mmc_priv(mmc);
if (host->pdata && host->pdata->get_ro)
return !!host->pdata->get_ro(mmc_dev(mmc));
/*
* Board doesn't support read only detection; let the mmc core
* decide what to do.
*/
return -ENOSYS;
}
static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct pxamci_host *host = mmc_priv(mmc);
if (ios->clock) {
unsigned long rate = host->clkrate;
unsigned int clk = rate / ios->clock;
if (host->clkrt == CLKRT_OFF)
clk_enable(host->clk);
if (ios->clock == 26000000) {
/* to support 26MHz on pxa300/pxa310 */
host->clkrt = 7;
} else {
/* to handle (19.5MHz, 26MHz) */
if (!clk)
clk = 1;
/*
* clk might result in a lower divisor than we
* desire. check for that condition and adjust
* as appropriate.
*/
if (rate / clk > ios->clock)
clk <<= 1;
host->clkrt = fls(clk) - 1;
}
/*
* we write clkrt on the next command
*/
} else {
pxamci_stop_clock(host);
if (host->clkrt != CLKRT_OFF) {
host->clkrt = CLKRT_OFF;
clk_disable(host->clk);
}
}
if (host->power_mode != ios->power_mode) {
host->power_mode = ios->power_mode;
if (host->pdata && host->pdata->setpower)
host->pdata->setpower(mmc_dev(mmc), ios->vdd);
if (ios->power_mode == MMC_POWER_ON)
host->cmdat |= CMDAT_INIT;
}
if (ios->bus_width == MMC_BUS_WIDTH_4)
host->cmdat |= CMDAT_SD_4DAT;
else
host->cmdat &= ~CMDAT_SD_4DAT;
pr_debug("PXAMCI: clkrt = %x cmdat = %x\n",
host->clkrt, host->cmdat);
}
static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
{
struct pxamci_host *pxa_host = mmc_priv(host);
if (enable)
pxamci_enable_irq(pxa_host, SDIO_INT);
else
pxamci_disable_irq(pxa_host, SDIO_INT);
}
static const struct mmc_host_ops pxamci_ops = {
.request = pxamci_request,
.get_ro = pxamci_get_ro,
.set_ios = pxamci_set_ios,
.enable_sdio_irq = pxamci_enable_sdio_irq,
};
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static void pxamci_dma_irq(int dma, void *devid)
{
struct pxamci_host *host = devid;
int dcsr = DCSR(dma);
DCSR(dma) = dcsr & ~DCSR_STOPIRQEN;
if (dcsr & DCSR_ENDINTR) {
writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
} else {
printk(KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n",
mmc_hostname(host->mmc), dma, dcsr);
host->data->error = -EIO;
pxamci_data_done(host, 0);
}
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t pxamci_detect_irq(int irq, void *devid)
{
struct pxamci_host *host = mmc_priv(devid);
mmc_detect_change(devid, host->pdata->detect_delay);
return IRQ_HANDLED;
}
static int pxamci_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
struct pxamci_host *host = NULL;
struct resource *r, *dmarx, *dmatx;
int ret, irq;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!r || irq < 0)
return -ENXIO;
r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
if (!r)
return -EBUSY;
mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev);
if (!mmc) {
ret = -ENOMEM;
goto out;
}
mmc->ops = &pxamci_ops;
/*
* We can do SG-DMA, but we don't because we never know how much
* data we successfully wrote to the card.
*/
mmc->max_phys_segs = NR_SG;
/*
* Our hardware DMA can handle a maximum of one page per SG entry.
*/
mmc->max_seg_size = PAGE_SIZE;
/*
* Block length register is only 10 bits before PXA27x.
*/
mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048;
/*
* Block count register is 16 bits.
*/
mmc->max_blk_count = 65535;
host = mmc_priv(mmc);
host->mmc = mmc;
host->dma = -1;
host->pdata = pdev->dev.platform_data;
host->clkrt = CLKRT_OFF;
host->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
host->clk = NULL;
goto out;
}
host->clkrate = clk_get_rate(host->clk);
/*
* Calculate minimum clock rate, rounding up.
*/
mmc->f_min = (host->clkrate + 63) / 64;
mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
: host->clkrate;
mmc->ocr_avail = host->pdata ?
host->pdata->ocr_mask :
MMC_VDD_32_33|MMC_VDD_33_34;
mmc->caps = 0;
host->cmdat = 0;
if (!cpu_is_pxa25x()) {
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
host->cmdat |= CMDAT_SDIO_INT_EN;
if (cpu_is_pxa300() || cpu_is_pxa310())
mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
MMC_CAP_SD_HIGHSPEED;
}
host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
if (!host->sg_cpu) {
ret = -ENOMEM;
goto out;
}
spin_lock_init(&host->lock);
host->res = r;
host->irq = irq;
host->imask = MMC_I_MASK_ALL;
host->base = ioremap(r->start, SZ_4K);
if (!host->base) {
ret = -ENOMEM;
goto out;
}
/*
* Ensure that the host controller is shut down, and setup
* with our defaults.
*/
pxamci_stop_clock(host);
writel(0, host->base + MMC_SPI);
writel(64, host->base + MMC_RESTO);
writel(host->imask, host->base + MMC_I_MASK);
host->dma = pxa_request_dma(DRIVER_NAME, DMA_PRIO_LOW,
pxamci_dma_irq, host);
if (host->dma < 0) {
ret = -EBUSY;
goto out;
}
ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
if (ret)
goto out;
platform_set_drvdata(pdev, mmc);
dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (!dmarx) {
ret = -ENXIO;
goto out;
}
host->dma_drcmrrx = dmarx->start;
dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (!dmatx) {
ret = -ENXIO;
goto out;
}
host->dma_drcmrtx = dmatx->start;
if (host->pdata && host->pdata->init)
host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
mmc_add_host(mmc);
return 0;
out:
if (host) {
if (host->dma >= 0)
pxa_free_dma(host->dma);
if (host->base)
iounmap(host->base);
if (host->sg_cpu)
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
if (host->clk)
clk_put(host->clk);
}
if (mmc)
mmc_free_host(mmc);
release_resource(r);
return ret;
}
static int pxamci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
if (mmc) {
struct pxamci_host *host = mmc_priv(mmc);
if (host->pdata && host->pdata->exit)
host->pdata->exit(&pdev->dev, mmc);
mmc_remove_host(mmc);
pxamci_stop_clock(host);
writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
host->base + MMC_I_MASK);
DRCMR(host->dma_drcmrrx) = 0;
DRCMR(host->dma_drcmrtx) = 0;
free_irq(host->irq, host);
pxa_free_dma(host->dma);
iounmap(host->base);
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
clk_put(host->clk);
release_resource(host->res);
mmc_free_host(mmc);
}
return 0;
}
#ifdef CONFIG_PM
static int pxamci_suspend(struct platform_device *dev, pm_message_t state)
{
struct mmc_host *mmc = platform_get_drvdata(dev);
int ret = 0;
if (mmc)
ret = mmc_suspend_host(mmc, state);
return ret;
}
static int pxamci_resume(struct platform_device *dev)
{
struct mmc_host *mmc = platform_get_drvdata(dev);
int ret = 0;
if (mmc)
ret = mmc_resume_host(mmc);
return ret;
}
#else
#define pxamci_suspend NULL
#define pxamci_resume NULL
#endif
static struct platform_driver pxamci_driver = {
.probe = pxamci_probe,
.remove = pxamci_remove,
.suspend = pxamci_suspend,
.resume = pxamci_resume,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
},
};
static int __init pxamci_init(void)
{
return platform_driver_register(&pxamci_driver);
}
static void __exit pxamci_exit(void)
{
platform_driver_unregister(&pxamci_driver);
}
module_init(pxamci_init);
module_exit(pxamci_exit);
MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pxa2xx-mci");