renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-17 01:34:00 +08:00
Code
04659febcb
linux-next/net/switchdev/switchdev.c

1136 lines
28 KiB
C
Raw Normal View History

net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 21:34:17 +08:00
/*
* net/switchdev/switchdev.c - Switch device API
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
* Copyright (c) 2014-2015 Jiri Pirko <jiri@resnulli.us>
switchdev: add netlink flags to IPv4 FIB add op Pass in the netlink flags (NLM_F_*) into switchdev driver for IPv4 FIB add op to allow driver to 1) optimize hardware updates, 2) handle ip route prepend and append commands correctly. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10 04:59:09 +08:00
* Copyright (c) 2014-2015 Scott Feldman <sfeldma@gmail.com>
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 21:34:17 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
#include <linux/mutex.h>
#include <linux/notifier.h>
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 21:34:17 +08:00
#include <linux/netdevice.h>
switchdev: remove pointers from switchdev objects When object is used in deferred work, we cannot use pointers in switchdev object structures because the memory they point at may be already used by someone else. So rather do local copy of the value. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:51 +08:00
#include <linux/etherdevice.h>
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
#include <linux/if_bridge.h>
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
#include <linux/list.h>
switchdev: introduce switchdev deferred ops infrastructure Introduce infrastructure which will be used internally to defer ops. Note that the deferred ops are queued up and either are processed by scheduled work or explicitly by user calling deferred_process function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:48 +08:00
#include <linux/workqueue.h>
switchdev: check if the vlan id is in the proper vlan range VLANs 0 and 4095 are reserved and shouldn't be used, add checks to switchdev similar to the bridge. Also make sure ids above 4095 cannot be passed either. Fixes: 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 20:31:01 +08:00
#include <linux/if_vlan.h>
switchdev: Require RTNL mutex to be held when sending FDB notifications When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c281234 ("switchdev: introduce switchdev notifier") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-27 22:16:43 +08:00
#include <linux/rtnetlink.h>
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 21:34:17 +08:00
#include <net/switchdev.h>
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
/**
* switchdev_trans_item_enqueue - Enqueue data item to transaction queue
*
* @trans: transaction
* @data: pointer to data being queued
* @destructor: data destructor
* @tritem: transaction item being queued
*
* Enqeueue data item to transaction queue. tritem is typically placed in
* cointainter pointed at by data pointer. Destructor is called on
* transaction abort and after successful commit phase in case
* the caller did not dequeue the item before.
*/
void switchdev_trans_item_enqueue(struct switchdev_trans *trans,
void *data, void (*destructor)(void const *),
struct switchdev_trans_item *tritem)
{
tritem->data = data;
tritem->destructor = destructor;
list_add_tail(&tritem->list, &trans->item_list);
}
EXPORT_SYMBOL_GPL(switchdev_trans_item_enqueue);
static struct switchdev_trans_item *
__switchdev_trans_item_dequeue(struct switchdev_trans *trans)
{
struct switchdev_trans_item *tritem;
if (list_empty(&trans->item_list))
return NULL;
tritem = list_first_entry(&trans->item_list,
struct switchdev_trans_item, list);
list_del(&tritem->list);
return tritem;
}
/**
* switchdev_trans_item_dequeue - Dequeue data item from transaction queue
*
* @trans: transaction
*/
void *switchdev_trans_item_dequeue(struct switchdev_trans *trans)
{
struct switchdev_trans_item *tritem;
tritem = __switchdev_trans_item_dequeue(trans);
BUG_ON(!tritem);
return tritem->data;
}
EXPORT_SYMBOL_GPL(switchdev_trans_item_dequeue);
static void switchdev_trans_init(struct switchdev_trans *trans)
{
INIT_LIST_HEAD(&trans->item_list);
}
static void switchdev_trans_items_destroy(struct switchdev_trans *trans)
{
struct switchdev_trans_item *tritem;
while ((tritem = __switchdev_trans_item_dequeue(trans)))
tritem->destructor(tritem->data);
}
static void switchdev_trans_items_warn_destroy(struct net_device *dev,
struct switchdev_trans *trans)
{
WARN(!list_empty(&trans->item_list), "%s: transaction item queue is not empty.\n",
dev->name);
switchdev_trans_items_destroy(trans);
}
switchdev: introduce switchdev deferred ops infrastructure Introduce infrastructure which will be used internally to defer ops. Note that the deferred ops are queued up and either are processed by scheduled work or explicitly by user calling deferred_process function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:48 +08:00
static LIST_HEAD(deferred);
static DEFINE_SPINLOCK(deferred_lock);
typedef void switchdev_deferred_func_t(struct net_device *dev,
const void *data);
struct switchdev_deferred_item {
struct list_head list;
struct net_device *dev;
switchdev_deferred_func_t *func;
unsigned long data[0];
};
static struct switchdev_deferred_item *switchdev_deferred_dequeue(void)
{
struct switchdev_deferred_item *dfitem;
spin_lock_bh(&deferred_lock);
if (list_empty(&deferred)) {
dfitem = NULL;
goto unlock;
}
dfitem = list_first_entry(&deferred,
struct switchdev_deferred_item, list);
list_del(&dfitem->list);
unlock:
spin_unlock_bh(&deferred_lock);
return dfitem;
}
/**
* switchdev_deferred_process - Process ops in deferred queue
*
* Called to flush the ops currently queued in deferred ops queue.
* rtnl_lock must be held.
*/
void switchdev_deferred_process(void)
{
struct switchdev_deferred_item *dfitem;
ASSERT_RTNL();
while ((dfitem = switchdev_deferred_dequeue())) {
dfitem->func(dfitem->dev, dfitem->data);
dev_put(dfitem->dev);
kfree(dfitem);
}
}
EXPORT_SYMBOL_GPL(switchdev_deferred_process);
static void switchdev_deferred_process_work(struct work_struct *work)
{
rtnl_lock();
switchdev_deferred_process();
rtnl_unlock();
}
static DECLARE_WORK(deferred_process_work, switchdev_deferred_process_work);
static int switchdev_deferred_enqueue(struct net_device *dev,
const void *data, size_t data_len,
switchdev_deferred_func_t *func)
{
struct switchdev_deferred_item *dfitem;
dfitem = kmalloc(sizeof(*dfitem) + data_len, GFP_ATOMIC);
if (!dfitem)
return -ENOMEM;
dfitem->dev = dev;
dfitem->func = func;
memcpy(dfitem->data, data, data_len);
dev_hold(dev);
spin_lock_bh(&deferred_lock);
list_add_tail(&dfitem->list, &deferred);
spin_unlock_bh(&deferred_lock);
schedule_work(&deferred_process_work);
return 0;
}
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
/**
* switchdev_port_attr_get - Get port attribute
*
* @dev: port device
* @attr: attribute to get
*/
int switchdev_port_attr_get(struct net_device *dev, struct switchdev_attr *attr)
{
const struct switchdev_ops *ops = dev->switchdev_ops;
struct net_device *lower_dev;
struct list_head *iter;
struct switchdev_attr first = {
switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_* To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:42 +08:00
.id = SWITCHDEV_ATTR_ID_UNDEFINED
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
};
int err = -EOPNOTSUPP;
if (ops && ops->switchdev_port_attr_get)
return ops->switchdev_port_attr_get(dev, attr);
if (attr->flags & SWITCHDEV_F_NO_RECURSE)
return err;
/* Switch device port(s) may be stacked under
* bond/team/vlan dev, so recurse down to get attr on
* each port. Return -ENODATA if attr values don't
* compare across ports.
*/
netdev_for_each_lower_dev(dev, lower_dev, iter) {
err = switchdev_port_attr_get(lower_dev, attr);
if (err)
break;
switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_* To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:42 +08:00
if (first.id == SWITCHDEV_ATTR_ID_UNDEFINED)
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
first = *attr;
else if (memcmp(&first, attr, sizeof(*attr)))
return -ENODATA;
}
return err;
}
EXPORT_SYMBOL_GPL(switchdev_port_attr_get);
static int __switchdev_port_attr_set(struct net_device *dev,
switchdev: make struct switchdev_attr parameter const for attr_set calls Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:49 +08:00
const struct switchdev_attr *attr,
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
struct switchdev_trans *trans)
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
{
const struct switchdev_ops *ops = dev->switchdev_ops;
struct net_device *lower_dev;
struct list_head *iter;
int err = -EOPNOTSUPP;
switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion Caller passing down the SKIP_EOPNOTSUPP switchdev flag expects that -EOPNOTSUPP cannot be returned. But in case of direct op call without recurtion, this may happen. So fix this by checking it always on the end of __switchdev_port_attr_set function. Fixes: 464314ea6c11 ("switchdev: skip over ports returning -EOPNOTSUPP when recursing ports") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04 00:40:53 +08:00
if (ops && ops->switchdev_port_attr_set) {
err = ops->switchdev_port_attr_set(dev, attr, trans);
goto done;
}
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
if (attr->flags & SWITCHDEV_F_NO_RECURSE)
switchdev: skip over ports returning -EOPNOTSUPP when recursing ports This allows us to recurse over all the ports, skipping over unsupporting ports. Without the change, the recursion would stop at first unsupported port. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09 10:23:18 +08:00
goto done;
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
/* Switch device port(s) may be stacked under
* bond/team/vlan dev, so recurse down to set attr on
* each port.
*/
netdev_for_each_lower_dev(dev, lower_dev, iter) {
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
err = __switchdev_port_attr_set(lower_dev, attr, trans);
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
if (err)
break;
}
switchdev: skip over ports returning -EOPNOTSUPP when recursing ports This allows us to recurse over all the ports, skipping over unsupporting ports. Without the change, the recursion would stop at first unsupported port. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09 10:23:18 +08:00
done:
if (err == -EOPNOTSUPP && attr->flags & SWITCHDEV_F_SKIP_EOPNOTSUPP)
err = 0;
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
return err;
}
switchdev: allow caller to explicitly request attr_set as deferred Caller should know if he can call attr_set directly (when holding RTNL) or if he has to defer the att_set processing for later. This also allows drivers to sleep inside attr_set and report operation status back to switchdev core. Switchdev core then warns if status is not ok, instead of silent errors happening in drivers. Benefit from newly introduced switchdev deferred ops infrastructure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:50 +08:00
static int switchdev_port_attr_set_now(struct net_device *dev,
const struct switchdev_attr *attr)
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
{
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
struct switchdev_trans trans;
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
int err;
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
switchdev_trans_init(&trans);
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
/* Phase I: prepare for attr set. Driver/device should fail
* here if there are going to be issues in the commit phase,
* such as lack of resources or support. The driver/device
* should reserve resources needed for the commit phase here,
* but should not commit the attr.
*/
switchdev: reduce transaction phase enum down to a boolean Now, since we have only 2 values for transaction phase, just use bool. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:49 +08:00
trans.ph_prepare = true;
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
err = __switchdev_port_attr_set(dev, attr, &trans);
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
if (err) {
/* Prepare phase failed: abort the transaction. Any
* resources reserved in the prepare phase are
* released.
*/
switchdev: remove "ABORT" transaction phase No longer used by drivers, as transaction queue with item destructors takes care of abort phase internally in switchdev code. So kill it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:47 +08:00
if (err != -EOPNOTSUPP)
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
switchdev_trans_items_destroy(&trans);
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
return err;
}
/* Phase II: commit attr set. This cannot fail as a fault
* of driver/device. If it does, it's a bug in the driver/device
* because the driver said everythings was OK in phase I.
*/
switchdev: reduce transaction phase enum down to a boolean Now, since we have only 2 values for transaction phase, just use bool. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:49 +08:00
trans.ph_prepare = false;
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
err = __switchdev_port_attr_set(dev, attr, &trans);
switchdev: change BUG_ON to WARN for attr set failure case This particular BUG_ON condition was checking for attr set err in the COMMIT phase, which isn't expected (it's a driver bug if PREPARE phase is OK but COMMIT fails). But BUG_ON() is too strong for this case, so change to WARN(). BUG_ON() would be warranted if the system was corrupted beyond repair, but this is not the case here. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12 02:20:42 +08:00
WARN(err, "%s: Commit of attribute (id=%d) failed.\n",
dev->name, attr->id);
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
switchdev_trans_items_warn_destroy(dev, &trans);
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
return err;
}
switchdev: allow caller to explicitly request attr_set as deferred Caller should know if he can call attr_set directly (when holding RTNL) or if he has to defer the att_set processing for later. This also allows drivers to sleep inside attr_set and report operation status back to switchdev core. Switchdev core then warns if status is not ok, instead of silent errors happening in drivers. Benefit from newly introduced switchdev deferred ops infrastructure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:50 +08:00
static void switchdev_port_attr_set_deferred(struct net_device *dev,
const void *data)
{
const struct switchdev_attr *attr = data;
int err;
err = switchdev_port_attr_set_now(dev, attr);
if (err && err != -EOPNOTSUPP)
netdev_err(dev, "failed (err=%d) to set attribute (id=%d)\n",
err, attr->id);
switchdev: Adding complete operation to deferred switchdev ops When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation is executed in different context and the application doesn't have any way to get the operation real status. Adding a completion callback fixes that. This patch adds fields to switchdev_attr and switchdev_obj "complete_priv" field which is used by the "complete" callback. Application can set a complete function which will be called once the operation executed. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21 18:52:43 +08:00
if (attr->complete)
attr->complete(dev, err, attr->complete_priv);
switchdev: allow caller to explicitly request attr_set as deferred Caller should know if he can call attr_set directly (when holding RTNL) or if he has to defer the att_set processing for later. This also allows drivers to sleep inside attr_set and report operation status back to switchdev core. Switchdev core then warns if status is not ok, instead of silent errors happening in drivers. Benefit from newly introduced switchdev deferred ops infrastructure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:50 +08:00
}
static int switchdev_port_attr_set_defer(struct net_device *dev,
const struct switchdev_attr *attr)
{
return switchdev_deferred_enqueue(dev, attr, sizeof(*attr),
switchdev_port_attr_set_deferred);
}
/**
* switchdev_port_attr_set - Set port attribute
*
* @dev: port device
* @attr: attribute to set
*
* Use a 2-phase prepare-commit transaction model to ensure
* system is not left in a partially updated state due to
* failure from driver/device.
*
* rtnl_lock must be held and must not be in atomic section,
* in case SWITCHDEV_F_DEFER flag is not set.
*/
int switchdev_port_attr_set(struct net_device *dev,
const struct switchdev_attr *attr)
{
if (attr->flags & SWITCHDEV_F_DEFER)
return switchdev_port_attr_set_defer(dev, attr);
ASSERT_RTNL();
return switchdev_port_attr_set_now(dev, attr);
}
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
EXPORT_SYMBOL_GPL(switchdev_port_attr_set);
switchdev: fix: pass correct obj size when deferring obj add Fixes: 4d429c5dd ("switchdev: introduce possibility to defer obj_add/del") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-29 14:17:31 +08:00
static size_t switchdev_obj_size(const struct switchdev_obj *obj)
{
switch (obj->id) {
case SWITCHDEV_OBJ_ID_PORT_VLAN:
return sizeof(struct switchdev_obj_port_vlan);
case SWITCHDEV_OBJ_ID_PORT_FDB:
return sizeof(struct switchdev_obj_port_fdb);
switchdev: Adding MDB entry offload Define HW multicast entry: MAC and VID. Using a MAC address simplifies support for both IPV4 and IPv6. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11 04:06:22 +08:00
case SWITCHDEV_OBJ_ID_PORT_MDB:
return sizeof(struct switchdev_obj_port_mdb);
switchdev: fix: pass correct obj size when deferring obj add Fixes: 4d429c5dd ("switchdev: introduce possibility to defer obj_add/del") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-29 14:17:31 +08:00
default:
BUG();
}
return 0;
}
switchdev: sparse warning: make __switchdev_port_obj_add static Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 14:03:51 +08:00
static int __switchdev_port_obj_add(struct net_device *dev,
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:45 +08:00
const struct switchdev_obj *obj,
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
struct switchdev_trans *trans)
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
{
const struct switchdev_ops *ops = dev->switchdev_ops;
struct net_device *lower_dev;
struct list_head *iter;
int err = -EOPNOTSUPP;
if (ops && ops->switchdev_port_obj_add)
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
return ops->switchdev_port_obj_add(dev, obj, trans);
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
/* Switch device port(s) may be stacked under
* bond/team/vlan dev, so recurse down to add object on
* each port.
*/
netdev_for_each_lower_dev(dev, lower_dev, iter) {
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
err = __switchdev_port_obj_add(lower_dev, obj, trans);
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
if (err)
break;
}
return err;
}
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
static int switchdev_port_obj_add_now(struct net_device *dev,
const struct switchdev_obj *obj)
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
{
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
struct switchdev_trans trans;
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
int err;
ASSERT_RTNL();
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
switchdev_trans_init(&trans);
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
/* Phase I: prepare for obj add. Driver/device should fail
* here if there are going to be issues in the commit phase,
* such as lack of resources or support. The driver/device
* should reserve resources needed for the commit phase here,
* but should not commit the obj.
*/
switchdev: reduce transaction phase enum down to a boolean Now, since we have only 2 values for transaction phase, just use bool. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:49 +08:00
trans.ph_prepare = true;
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
err = __switchdev_port_obj_add(dev, obj, &trans);
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
if (err) {
/* Prepare phase failed: abort the transaction. Any
* resources reserved in the prepare phase are
* released.
*/
switchdev: remove "ABORT" transaction phase No longer used by drivers, as transaction queue with item destructors takes care of abort phase internally in switchdev code. So kill it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:47 +08:00
if (err != -EOPNOTSUPP)
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
switchdev_trans_items_destroy(&trans);
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
return err;
}
/* Phase II: commit obj add. This cannot fail as a fault
* of driver/device. If it does, it's a bug in the driver/device
* because the driver said everythings was OK in phase I.
*/
switchdev: reduce transaction phase enum down to a boolean Now, since we have only 2 values for transaction phase, just use bool. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:49 +08:00
trans.ph_prepare = false;
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
err = __switchdev_port_obj_add(dev, obj, &trans);
WARN(err, "%s: Commit of object (id=%d) failed.\n", dev->name, obj->id);
switchdev: introduce transaction item queue for attr_set and obj_add Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:41 +08:00
switchdev_trans_items_warn_destroy(dev, &trans);
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
return err;
}
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
static void switchdev_port_obj_add_deferred(struct net_device *dev,
const void *data)
{
const struct switchdev_obj *obj = data;
int err;
err = switchdev_port_obj_add_now(dev, obj);
if (err && err != -EOPNOTSUPP)
netdev_err(dev, "failed (err=%d) to add object (id=%d)\n",
err, obj->id);
switchdev: Adding complete operation to deferred switchdev ops When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation is executed in different context and the application doesn't have any way to get the operation real status. Adding a completion callback fixes that. This patch adds fields to switchdev_attr and switchdev_obj "complete_priv" field which is used by the "complete" callback. Application can set a complete function which will be called once the operation executed. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21 18:52:43 +08:00
if (obj->complete)
obj->complete(dev, err, obj->complete_priv);
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
}
static int switchdev_port_obj_add_defer(struct net_device *dev,
const struct switchdev_obj *obj)
{
switchdev: fix: pass correct obj size when deferring obj add Fixes: 4d429c5dd ("switchdev: introduce possibility to defer obj_add/del") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-29 14:17:31 +08:00
return switchdev_deferred_enqueue(dev, obj, switchdev_obj_size(obj),
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
switchdev_port_obj_add_deferred);
}
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
/**
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
* switchdev_port_obj_add - Add port object
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
*
* @dev: port device
net: switchdev: abstract object in add/del ops Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:17 +08:00
* @id: object ID
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
* @obj: object to add
*
* Use a 2-phase prepare-commit transaction model to ensure
* system is not left in a partially updated state due to
* failure from driver/device.
*
* rtnl_lock must be held and must not be in atomic section,
* in case SWITCHDEV_F_DEFER flag is not set.
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
*/
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
int switchdev_port_obj_add(struct net_device *dev,
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:45 +08:00
const struct switchdev_obj *obj)
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
{
if (obj->flags & SWITCHDEV_F_DEFER)
return switchdev_port_obj_add_defer(dev, obj);
ASSERT_RTNL();
return switchdev_port_obj_add_now(dev, obj);
}
EXPORT_SYMBOL_GPL(switchdev_port_obj_add);
static int switchdev_port_obj_del_now(struct net_device *dev,
const struct switchdev_obj *obj)
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
{
const struct switchdev_ops *ops = dev->switchdev_ops;
struct net_device *lower_dev;
struct list_head *iter;
int err = -EOPNOTSUPP;
if (ops && ops->switchdev_port_obj_del)
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
return ops->switchdev_port_obj_del(dev, obj);
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
/* Switch device port(s) may be stacked under
* bond/team/vlan dev, so recurse down to delete object on
* each port.
*/
netdev_for_each_lower_dev(dev, lower_dev, iter) {
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
err = switchdev_port_obj_del_now(lower_dev, obj);
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
if (err)
break;
}
return err;
}
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
static void switchdev_port_obj_del_deferred(struct net_device *dev,
const void *data)
{
const struct switchdev_obj *obj = data;
int err;
err = switchdev_port_obj_del_now(dev, obj);
if (err && err != -EOPNOTSUPP)
netdev_err(dev, "failed (err=%d) to del object (id=%d)\n",
err, obj->id);
switchdev: Adding complete operation to deferred switchdev ops When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation is executed in different context and the application doesn't have any way to get the operation real status. Adding a completion callback fixes that. This patch adds fields to switchdev_attr and switchdev_obj "complete_priv" field which is used by the "complete" callback. Application can set a complete function which will be called once the operation executed. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21 18:52:43 +08:00
if (obj->complete)
obj->complete(dev, err, obj->complete_priv);
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
}
static int switchdev_port_obj_del_defer(struct net_device *dev,
const struct switchdev_obj *obj)
{
switchdev: fix: pass correct obj size when deferring obj add Fixes: 4d429c5dd ("switchdev: introduce possibility to defer obj_add/del") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-29 14:17:31 +08:00
return switchdev_deferred_enqueue(dev, obj, switchdev_obj_size(obj),
switchdev: introduce possibility to defer obj_add/del Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:52 +08:00
switchdev_port_obj_del_deferred);
}
/**
* switchdev_port_obj_del - Delete port object
*
* @dev: port device
* @id: object ID
* @obj: object to delete
*
* rtnl_lock must be held and must not be in atomic section,
* in case SWITCHDEV_F_DEFER flag is not set.
*/
int switchdev_port_obj_del(struct net_device *dev,
const struct switchdev_obj *obj)
{
if (obj->flags & SWITCHDEV_F_DEFER)
return switchdev_port_obj_del_defer(dev, obj);
ASSERT_RTNL();
return switchdev_port_obj_del_now(dev, obj);
}
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
EXPORT_SYMBOL_GPL(switchdev_port_obj_del);
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
/**
* switchdev_port_obj_dump - Dump port objects
*
* @dev: port device
net: switchdev: pass callback to dump operation Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev dump operation to: int switchdev_port_obj_dump(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of dump operation can now expect this specific structure and call the callback with it. Drivers have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:16 +08:00
* @id: object ID
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
* @obj: object to dump
net: switchdev: pass callback to dump operation Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev dump operation to: int switchdev_port_obj_dump(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of dump operation can now expect this specific structure and call the callback with it. Drivers have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:16 +08:00
* @cb: function to call with a filled object
switchdev: assert rtnl mutex when going over lower netdevs netdev_for_each_lower_dev has to be called with rtnl mutex held. So better enforce it in switchdev functions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:55 +08:00
*
* rtnl_lock must be held.
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
*/
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
int switchdev_port_obj_dump(struct net_device *dev, struct switchdev_obj *obj,
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:45 +08:00
switchdev_obj_dump_cb_t *cb)
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
{
const struct switchdev_ops *ops = dev->switchdev_ops;
struct net_device *lower_dev;
struct list_head *iter;
int err = -EOPNOTSUPP;
switchdev: assert rtnl mutex when going over lower netdevs netdev_for_each_lower_dev has to be called with rtnl mutex held. So better enforce it in switchdev functions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:55 +08:00
ASSERT_RTNL();
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
if (ops && ops->switchdev_port_obj_dump)
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
return ops->switchdev_port_obj_dump(dev, obj, cb);
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
/* Switch device port(s) may be stacked under
* bond/team/vlan dev, so recurse down to dump objects on
* first port at bottom of stack.
*/
netdev_for_each_lower_dev(dev, lower_dev, iter) {
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
err = switchdev_port_obj_dump(lower_dev, obj, cb);
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
break;
}
return err;
}
EXPORT_SYMBOL_GPL(switchdev_port_obj_dump);
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
static RAW_NOTIFIER_HEAD(switchdev_notif_chain);
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
/**
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
* register_switchdev_notifier - Register notifier
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
* @nb: notifier_block
*
* Register switch device notifier. This should be used by code
* which needs to monitor events happening in particular device.
* Return values are same as for atomic_notifier_chain_register().
*/
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
int register_switchdev_notifier(struct notifier_block *nb)
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
{
int err;
switchdev: Require RTNL mutex to be held when sending FDB notifications When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c281234 ("switchdev: introduce switchdev notifier") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-27 22:16:43 +08:00
rtnl_lock();
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
err = raw_notifier_chain_register(&switchdev_notif_chain, nb);
switchdev: Require RTNL mutex to be held when sending FDB notifications When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c281234 ("switchdev: introduce switchdev notifier") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-27 22:16:43 +08:00
rtnl_unlock();
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
return err;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
EXPORT_SYMBOL_GPL(register_switchdev_notifier);
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
/**
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
* unregister_switchdev_notifier - Unregister notifier
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
* @nb: notifier_block
*
* Unregister switch device notifier.
* Return values are same as for atomic_notifier_chain_unregister().
*/
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
int unregister_switchdev_notifier(struct notifier_block *nb)
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
{
int err;
switchdev: Require RTNL mutex to be held when sending FDB notifications When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c281234 ("switchdev: introduce switchdev notifier") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-27 22:16:43 +08:00
rtnl_lock();
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
err = raw_notifier_chain_unregister(&switchdev_notif_chain, nb);
switchdev: Require RTNL mutex to be held when sending FDB notifications When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c281234 ("switchdev: introduce switchdev notifier") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-27 22:16:43 +08:00
rtnl_unlock();
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
return err;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
EXPORT_SYMBOL_GPL(unregister_switchdev_notifier);
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
/**
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
* call_switchdev_notifiers - Call notifiers
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
* @val: value passed unmodified to notifier function
* @dev: port device
* @info: notifier information data
*
* Call all network notifier blocks. This should be called by driver
* when it needs to propagate hardware event.
* Return values are same as for atomic_notifier_call_chain().
switchdev: Require RTNL mutex to be held when sending FDB notifications When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c281234 ("switchdev: introduce switchdev notifier") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-27 22:16:43 +08:00
* rtnl_lock must be held.
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
*/
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
int call_switchdev_notifiers(unsigned long val, struct net_device *dev,
struct switchdev_notifier_info *info)
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
{
int err;
switchdev: Require RTNL mutex to be held when sending FDB notifications When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c281234 ("switchdev: introduce switchdev notifier") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-27 22:16:43 +08:00
ASSERT_RTNL();
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
info->dev = dev;
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
err = raw_notifier_call_chain(&switchdev_notif_chain, val, info);
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
return err;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
EXPORT_SYMBOL_GPL(call_switchdev_notifiers);
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
struct switchdev_vlan_dump {
switchdev: rename switchdev_obj_vlan to switchdev_obj_port_vlan Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:43 +08:00
struct switchdev_obj_port_vlan vlan;
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
struct sk_buff *skb;
u32 filter_mask;
u16 flags;
u16 begin;
u16 end;
};
net: switchdev: remove dev in port_vlan_dump_put The static switchdev_port_vlan_dump_put function does not need the net_device parameter, so remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:13 +08:00
static int switchdev_port_vlan_dump_put(struct switchdev_vlan_dump *dump)
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
{
struct bridge_vlan_info vinfo;
vinfo.flags = dump->flags;
if (dump->begin == 0 && dump->end == 0) {
return 0;
} else if (dump->begin == dump->end) {
vinfo.vid = dump->begin;
if (nla_put(dump->skb, IFLA_BRIDGE_VLAN_INFO,
sizeof(vinfo), &vinfo))
return -EMSGSIZE;
} else {
vinfo.vid = dump->begin;
vinfo.flags |= BRIDGE_VLAN_INFO_RANGE_BEGIN;
if (nla_put(dump->skb, IFLA_BRIDGE_VLAN_INFO,
sizeof(vinfo), &vinfo))
return -EMSGSIZE;
vinfo.vid = dump->end;
vinfo.flags &= ~BRIDGE_VLAN_INFO_RANGE_BEGIN;
vinfo.flags |= BRIDGE_VLAN_INFO_RANGE_END;
if (nla_put(dump->skb, IFLA_BRIDGE_VLAN_INFO,
sizeof(vinfo), &vinfo))
return -EMSGSIZE;
}
return 0;
}
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:45 +08:00
static int switchdev_port_vlan_dump_cb(struct switchdev_obj *obj)
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
{
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:45 +08:00
struct switchdev_obj_port_vlan *vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
struct switchdev_vlan_dump *dump =
net: switchdev: pass callback to dump operation Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev dump operation to: int switchdev_port_obj_dump(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of dump operation can now expect this specific structure and call the callback with it. Drivers have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:16 +08:00
container_of(vlan, struct switchdev_vlan_dump, vlan);
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
int err = 0;
if (vlan->vid_begin > vlan->vid_end)
return -EINVAL;
if (dump->filter_mask & RTEXT_FILTER_BRVLAN) {
dump->flags = vlan->flags;
for (dump->begin = dump->end = vlan->vid_begin;
dump->begin <= vlan->vid_end;
dump->begin++, dump->end++) {
net: switchdev: remove dev in port_vlan_dump_put The static switchdev_port_vlan_dump_put function does not need the net_device parameter, so remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:13 +08:00
err = switchdev_port_vlan_dump_put(dump);
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
if (err)
return err;
}
} else if (dump->filter_mask & RTEXT_FILTER_BRVLAN_COMPRESSED) {
if (dump->begin > vlan->vid_begin &&
dump->begin >= vlan->vid_end) {
if ((dump->begin - 1) == vlan->vid_end &&
dump->flags == vlan->flags) {
/* prepend */
dump->begin = vlan->vid_begin;
} else {
net: switchdev: remove dev in port_vlan_dump_put The static switchdev_port_vlan_dump_put function does not need the net_device parameter, so remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:13 +08:00
err = switchdev_port_vlan_dump_put(dump);
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
dump->flags = vlan->flags;
dump->begin = vlan->vid_begin;
dump->end = vlan->vid_end;
}
} else if (dump->end <= vlan->vid_begin &&
dump->end < vlan->vid_end) {
if ((dump->end + 1) == vlan->vid_begin &&
dump->flags == vlan->flags) {
/* append */
dump->end = vlan->vid_end;
} else {
net: switchdev: remove dev in port_vlan_dump_put The static switchdev_port_vlan_dump_put function does not need the net_device parameter, so remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:13 +08:00
err = switchdev_port_vlan_dump_put(dump);
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
dump->flags = vlan->flags;
dump->begin = vlan->vid_begin;
dump->end = vlan->vid_end;
}
} else {
err = -EINVAL;
}
}
return err;
}
static int switchdev_port_vlan_fill(struct sk_buff *skb, struct net_device *dev,
u32 filter_mask)
{
struct switchdev_vlan_dump dump = {
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 23:03:35 +08:00
.vlan.obj.orig_dev = dev,
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
.vlan.obj.id = SWITCHDEV_OBJ_ID_PORT_VLAN,
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
.skb = skb,
.filter_mask = filter_mask,
};
int err = 0;
if ((filter_mask & RTEXT_FILTER_BRVLAN) ||
(filter_mask & RTEXT_FILTER_BRVLAN_COMPRESSED)) {
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
err = switchdev_port_obj_dump(dev, &dump.vlan.obj,
net: switchdev: pass callback to dump operation Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev dump operation to: int switchdev_port_obj_dump(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of dump operation can now expect this specific structure and call the callback with it. Drivers have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:16 +08:00
switchdev_port_vlan_dump_cb);
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
if (err)
goto err_out;
if (filter_mask & RTEXT_FILTER_BRVLAN_COMPRESSED)
/* last one */
net: switchdev: remove dev in port_vlan_dump_put The static switchdev_port_vlan_dump_put function does not need the net_device parameter, so remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:13 +08:00
err = switchdev_port_vlan_dump_put(&dump);
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
}
err_out:
return err == -EOPNOTSUPP ? 0 : err;
}
switchdev: add new switchdev_port_bridge_getlink Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and call into port driver to get port attrs. For now, only BR_LEARNING and BR_LEARNING_SYNC are returned. To add more, we'll probably want to break away from ndo_dflt_bridge_getlink() and build the netlink skb directly in the switchdev code. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:04 +08:00
/**
* switchdev_port_bridge_getlink - Get bridge port attributes
*
* @dev: port device
*
* Called for SELF on rtnl_bridge_getlink to get bridge port
* attributes.
*/
int switchdev_port_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
struct net_device *dev, u32 filter_mask,
int nlflags)
{
struct switchdev_attr attr = {
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 23:03:35 +08:00
.orig_dev = dev,
switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_* To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:42 +08:00
.id = SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS,
switchdev: add new switchdev_port_bridge_getlink Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and call into port driver to get port attrs. For now, only BR_LEARNING and BR_LEARNING_SYNC are returned. To add more, we'll probably want to break away from ndo_dflt_bridge_getlink() and build the netlink skb directly in the switchdev code. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:04 +08:00
};
u16 mode = BRIDGE_MODE_UNDEF;
switchdev: Add support for flood control Allow devices supporting this feature to control the flooding of unknown unicast traffic, by making switchdev infrastructure propagate this setting to the switch driver. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28 17:16:54 +08:00
u32 mask = BR_LEARNING | BR_LEARNING_SYNC | BR_FLOOD;
switchdev: add new switchdev_port_bridge_getlink Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and call into port driver to get port attrs. For now, only BR_LEARNING and BR_LEARNING_SYNC are returned. To add more, we'll probably want to break away from ndo_dflt_bridge_getlink() and build the netlink skb directly in the switchdev code. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:04 +08:00
int err;
switchdev: Execute bridge ndos only for bridge ports We recently got the following warning after setting up a vlan device on top of an offloaded bridge and executing 'bridge link': WARNING: CPU: 0 PID: 18566 at drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:81 mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [...] CPU: 0 PID: 18566 Comm: bridge Not tainted 4.8.0-rc7 #1 Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 0000000000000286 00000000e64ab94f ffff880406e6f8f0 ffffffff8135eaa3 0000000000000000 0000000000000000 ffff880406e6f930 ffffffff8108c43b 0000005106e6f988 ffff8803df398840 ffff880403c60108 ffff880406e6f990 Call Trace: [<ffffffff8135eaa3>] dump_stack+0x63/0x90 [<ffffffff8108c43b>] __warn+0xcb/0xf0 [<ffffffff8108c56d>] warn_slowpath_null+0x1d/0x20 [<ffffffffa01420d5>] mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [<ffffffffa0142195>] mlxsw_sp_port_attr_get+0xa5/0xb0 [mlxsw_spectrum] [<ffffffff816f151f>] switchdev_port_attr_get+0x4f/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f1d6b>] switchdev_port_bridge_getlink+0x5b/0xc0 [<ffffffff816f2680>] ? switchdev_port_fdb_dump+0x90/0x90 [<ffffffff815f5427>] rtnl_bridge_getlink+0xe7/0x190 [<ffffffff8161a1b2>] netlink_dump+0x122/0x290 [<ffffffff8161b0df>] __netlink_dump_start+0x15f/0x190 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fab46>] rtnetlink_rcv_msg+0x1a6/0x220 [<ffffffff81208118>] ? __kmalloc_node_track_caller+0x208/0x2c0 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fa9a0>] ? rtnl_newlink+0x890/0x890 [<ffffffff8161cf54>] netlink_rcv_skb+0xa4/0xc0 [<ffffffff815f56f8>] rtnetlink_rcv+0x28/0x30 [<ffffffff8161c92c>] netlink_unicast+0x18c/0x240 [<ffffffff8161ccdb>] netlink_sendmsg+0x2fb/0x3a0 [<ffffffff815c5a48>] sock_sendmsg+0x38/0x50 [<ffffffff815c6031>] SYSC_sendto+0x101/0x190 [<ffffffff815c7111>] ? __sys_recvmsg+0x51/0x90 [<ffffffff815c6b6e>] SyS_sendto+0xe/0x10 [<ffffffff817017f2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 The problem is that the 8021q module propagates the call to ndo_bridge_getlink() via switchdev ops, but the switch driver doesn't recognize the netdev, as it's not offloaded. While we can ignore calls being made to non-bridge ports inside the driver, a better fix would be to push this check up to the switchdev layer. Note that these ndos can be called for non-bridged netdev, but this only happens in certain PF drivers which don't call the corresponding switchdev functions anyway. Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19 00:50:23 +08:00
if (!netif_is_bridge_port(dev))
return -EOPNOTSUPP;
switchdev: add new switchdev_port_bridge_getlink Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and call into port driver to get port attrs. For now, only BR_LEARNING and BR_LEARNING_SYNC are returned. To add more, we'll probably want to break away from ndo_dflt_bridge_getlink() and build the netlink skb directly in the switchdev code. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:04 +08:00
err = switchdev_port_attr_get(dev, &attr);
net: switchdev: ignore unsupported bridge flags switchdev_port_bridge_getlink() queries SWITCHDEV_ATTR_PORT_BRIDGE_FLAGS attributes, but a driver doesn't need to implement this in order to get bridge link information. So error out only on errors different than -EOPNOTSUPP. (This is a follow-up patch for 7d4f8d8.) Fixes: 8793d0a664a8 ("switchdev: add new switchdev_port_bridge_getlink") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23 22:26:04 +08:00
if (err && err != -EOPNOTSUPP)
switchdev: add new switchdev_port_bridge_getlink Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and call into port driver to get port attrs. For now, only BR_LEARNING and BR_LEARNING_SYNC are returned. To add more, we'll probably want to break away from ndo_dflt_bridge_getlink() and build the netlink skb directly in the switchdev code. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:04 +08:00
return err;
return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode,
switchdev; add VLAN support for port's bridge_getlink One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:17 +08:00
attr.u.brport_flags, mask, nlflags,
filter_mask, switchdev_port_vlan_fill);
switchdev: add new switchdev_port_bridge_getlink Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and call into port driver to get port attrs. For now, only BR_LEARNING and BR_LEARNING_SYNC are returned. To add more, we'll probably want to break away from ndo_dflt_bridge_getlink() and build the netlink skb directly in the switchdev code. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:04 +08:00
}
EXPORT_SYMBOL_GPL(switchdev_port_bridge_getlink);
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
static int switchdev_port_br_setflag(struct net_device *dev,
struct nlattr *nlattr,
unsigned long brport_flag)
{
struct switchdev_attr attr = {
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 23:03:35 +08:00
.orig_dev = dev,
switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_* To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:42 +08:00
.id = SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS,
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
};
u8 flag = nla_get_u8(nlattr);
int err;
err = switchdev_port_attr_get(dev, &attr);
if (err)
return err;
if (flag)
switchdev: don't use anonymous union on switchdev attr/obj structs Older gcc versions (e.g. gcc version 4.4.6) don't like anonymous unions which was causing build issues on the newly added switchdev attr/obj structs. Fix this by using named union on structs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 02:16:50 +08:00
attr.u.brport_flags |= brport_flag;
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
else
switchdev: don't use anonymous union on switchdev attr/obj structs Older gcc versions (e.g. gcc version 4.4.6) don't like anonymous unions which was causing build issues on the newly added switchdev attr/obj structs. Fix this by using named union on structs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 02:16:50 +08:00
attr.u.brport_flags &= ~brport_flag;
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
return switchdev_port_attr_set(dev, &attr);
}
static const struct nla_policy
switchdev_port_bridge_policy[IFLA_BRPORT_MAX + 1] = {
[IFLA_BRPORT_STATE] = { .type = NLA_U8 },
[IFLA_BRPORT_COST] = { .type = NLA_U32 },
[IFLA_BRPORT_PRIORITY] = { .type = NLA_U16 },
[IFLA_BRPORT_MODE] = { .type = NLA_U8 },
[IFLA_BRPORT_GUARD] = { .type = NLA_U8 },
[IFLA_BRPORT_PROTECT] = { .type = NLA_U8 },
[IFLA_BRPORT_FAST_LEAVE] = { .type = NLA_U8 },
[IFLA_BRPORT_LEARNING] = { .type = NLA_U8 },
[IFLA_BRPORT_LEARNING_SYNC] = { .type = NLA_U8 },
[IFLA_BRPORT_UNICAST_FLOOD] = { .type = NLA_U8 },
};
static int switchdev_port_br_setlink_protinfo(struct net_device *dev,
struct nlattr *protinfo)
{
struct nlattr *attr;
int rem;
int err;
err = nla_validate_nested(protinfo, IFLA_BRPORT_MAX,
switchdev_port_bridge_policy);
if (err)
return err;
nla_for_each_nested(attr, protinfo, rem) {
switch (nla_type(attr)) {
case IFLA_BRPORT_LEARNING:
err = switchdev_port_br_setflag(dev, attr,
BR_LEARNING);
break;
case IFLA_BRPORT_LEARNING_SYNC:
err = switchdev_port_br_setflag(dev, attr,
BR_LEARNING_SYNC);
break;
switchdev: Add support for flood control Allow devices supporting this feature to control the flooding of unknown unicast traffic, by making switchdev infrastructure propagate this setting to the switch driver. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28 17:16:54 +08:00
case IFLA_BRPORT_UNICAST_FLOOD:
err = switchdev_port_br_setflag(dev, attr, BR_FLOOD);
break;
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
default:
err = -EOPNOTSUPP;
break;
}
if (err)
return err;
}
return 0;
}
static int switchdev_port_br_afspec(struct net_device *dev,
struct nlattr *afspec,
int (*f)(struct net_device *dev,
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:45 +08:00
const struct switchdev_obj *obj))
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
{
struct nlattr *attr;
struct bridge_vlan_info *vinfo;
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
struct switchdev_obj_port_vlan vlan = {
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 23:03:35 +08:00
.obj.orig_dev = dev,
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
.obj.id = SWITCHDEV_OBJ_ID_PORT_VLAN,
};
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
int rem;
int err;
nla_for_each_nested(attr, afspec, rem) {
if (nla_type(attr) != IFLA_BRIDGE_VLAN_INFO)
continue;
if (nla_len(attr) != sizeof(struct bridge_vlan_info))
return -EINVAL;
vinfo = nla_data(attr);
switchdev: check if the vlan id is in the proper vlan range VLANs 0 and 4095 are reserved and shouldn't be used, add checks to switchdev similar to the bridge. Also make sure ids above 4095 cannot be passed either. Fixes: 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 20:31:01 +08:00
if (!vinfo->vid || vinfo->vid >= VLAN_VID_MASK)
return -EINVAL;
net: switchdev: abstract object in add/del ops Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:17 +08:00
vlan.flags = vinfo->flags;
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
if (vinfo->flags & BRIDGE_VLAN_INFO_RANGE_BEGIN) {
net: switchdev: abstract object in add/del ops Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:17 +08:00
if (vlan.vid_begin)
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
return -EINVAL;
net: switchdev: abstract object in add/del ops Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:17 +08:00
vlan.vid_begin = vinfo->vid;
switchdev: enforce no pvid flag in vlan ranges We shouldn't allow BRIDGE_VLAN_INFO_PVID flag in VLAN ranges. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Elad Raz <eladr@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 20:01:39 +08:00
/* don't allow range of pvids */
if (vlan.flags & BRIDGE_VLAN_INFO_PVID)
return -EINVAL;
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
} else if (vinfo->flags & BRIDGE_VLAN_INFO_RANGE_END) {
net: switchdev: abstract object in add/del ops Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:17 +08:00
if (!vlan.vid_begin)
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
return -EINVAL;
net: switchdev: abstract object in add/del ops Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:17 +08:00
vlan.vid_end = vinfo->vid;
if (vlan.vid_end <= vlan.vid_begin)
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
return -EINVAL;
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
err = f(dev, &vlan.obj);
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
if (err)
return err;
switchdev: fix: erasing too much of vlan obj when handling multiple vlan specs When adding vlans with multiple IFLA_BRIDGE_VLAN_INFO attrs set in AFSPEC, we would wipe the vlan obj struct after the first IFLA_BRIDGE_VLAN_INFO. Fix this by only clearing what's necessary on each IFLA_BRIDGE_VLAN_INFO iteration. Fixes: 9e8f4a54 ("switchdev: push object ID back to object structure") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-29 14:17:30 +08:00
vlan.vid_begin = 0;
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
} else {
net: switchdev: abstract object in add/del ops Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:17 +08:00
if (vlan.vid_begin)
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
return -EINVAL;
net: switchdev: abstract object in add/del ops Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:17 +08:00
vlan.vid_begin = vinfo->vid;
vlan.vid_end = vinfo->vid;
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
err = f(dev, &vlan.obj);
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
if (err)
return err;
switchdev: fix: erasing too much of vlan obj when handling multiple vlan specs When adding vlans with multiple IFLA_BRIDGE_VLAN_INFO attrs set in AFSPEC, we would wipe the vlan obj struct after the first IFLA_BRIDGE_VLAN_INFO. Fix this by only clearing what's necessary on each IFLA_BRIDGE_VLAN_INFO iteration. Fixes: 9e8f4a54 ("switchdev: push object ID back to object structure") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-29 14:17:30 +08:00
vlan.vid_begin = 0;
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
}
}
return 0;
}
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
/**
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
* switchdev_port_bridge_setlink - Set bridge port attributes
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
*
* @dev: port device
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
* @nlh: netlink header
* @flags: netlink flags
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
*
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
* Called for SELF on rtnl_bridge_setlink to set bridge port
* attributes.
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
*/
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
int switchdev_port_bridge_setlink(struct net_device *dev,
struct nlmsghdr *nlh, u16 flags)
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
{
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
struct nlattr *protinfo;
struct nlattr *afspec;
int err = 0;
switchdev: Execute bridge ndos only for bridge ports We recently got the following warning after setting up a vlan device on top of an offloaded bridge and executing 'bridge link': WARNING: CPU: 0 PID: 18566 at drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:81 mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [...] CPU: 0 PID: 18566 Comm: bridge Not tainted 4.8.0-rc7 #1 Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 0000000000000286 00000000e64ab94f ffff880406e6f8f0 ffffffff8135eaa3 0000000000000000 0000000000000000 ffff880406e6f930 ffffffff8108c43b 0000005106e6f988 ffff8803df398840 ffff880403c60108 ffff880406e6f990 Call Trace: [<ffffffff8135eaa3>] dump_stack+0x63/0x90 [<ffffffff8108c43b>] __warn+0xcb/0xf0 [<ffffffff8108c56d>] warn_slowpath_null+0x1d/0x20 [<ffffffffa01420d5>] mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [<ffffffffa0142195>] mlxsw_sp_port_attr_get+0xa5/0xb0 [mlxsw_spectrum] [<ffffffff816f151f>] switchdev_port_attr_get+0x4f/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f1d6b>] switchdev_port_bridge_getlink+0x5b/0xc0 [<ffffffff816f2680>] ? switchdev_port_fdb_dump+0x90/0x90 [<ffffffff815f5427>] rtnl_bridge_getlink+0xe7/0x190 [<ffffffff8161a1b2>] netlink_dump+0x122/0x290 [<ffffffff8161b0df>] __netlink_dump_start+0x15f/0x190 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fab46>] rtnetlink_rcv_msg+0x1a6/0x220 [<ffffffff81208118>] ? __kmalloc_node_track_caller+0x208/0x2c0 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fa9a0>] ? rtnl_newlink+0x890/0x890 [<ffffffff8161cf54>] netlink_rcv_skb+0xa4/0xc0 [<ffffffff815f56f8>] rtnetlink_rcv+0x28/0x30 [<ffffffff8161c92c>] netlink_unicast+0x18c/0x240 [<ffffffff8161ccdb>] netlink_sendmsg+0x2fb/0x3a0 [<ffffffff815c5a48>] sock_sendmsg+0x38/0x50 [<ffffffff815c6031>] SYSC_sendto+0x101/0x190 [<ffffffff815c7111>] ? __sys_recvmsg+0x51/0x90 [<ffffffff815c6b6e>] SyS_sendto+0xe/0x10 [<ffffffff817017f2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 The problem is that the 8021q module propagates the call to ndo_bridge_getlink() via switchdev ops, but the switch driver doesn't recognize the netdev, as it's not offloaded. While we can ignore calls being made to non-bridge ports inside the driver, a better fix would be to push this check up to the switchdev layer. Note that these ndos can be called for non-bridged netdev, but this only happens in certain PF drivers which don't call the corresponding switchdev functions anyway. Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19 00:50:23 +08:00
if (!netif_is_bridge_port(dev))
return -EOPNOTSUPP;
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
protinfo = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg),
IFLA_PROTINFO);
if (protinfo) {
err = switchdev_port_br_setlink_protinfo(dev, protinfo);
if (err)
return err;
}
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
afspec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg),
IFLA_AF_SPEC);
if (afspec)
err = switchdev_port_br_afspec(dev, afspec,
switchdev_port_obj_add);
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
switchdev: add new switchdev bridge setlink Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:56 +08:00
return err;
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
EXPORT_SYMBOL_GPL(switchdev_port_bridge_setlink);
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
/**
switchdev: add new switchdev_port_bridge_dellink Same change as setlink. Provide the wrapper op for SELF ndo_bridge_dellink and call into the switchdev driver to delete afspec VLANs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:00 +08:00
* switchdev_port_bridge_dellink - Set bridge port attributes
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
*
* @dev: port device
switchdev: add new switchdev_port_bridge_dellink Same change as setlink. Provide the wrapper op for SELF ndo_bridge_dellink and call into the switchdev driver to delete afspec VLANs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:00 +08:00
* @nlh: netlink header
* @flags: netlink flags
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
*
switchdev: add new switchdev_port_bridge_dellink Same change as setlink. Provide the wrapper op for SELF ndo_bridge_dellink and call into the switchdev driver to delete afspec VLANs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:00 +08:00
* Called for SELF on rtnl_bridge_dellink to set bridge port
* attributes.
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
*/
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
int switchdev_port_bridge_dellink(struct net_device *dev,
struct nlmsghdr *nlh, u16 flags)
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
{
switchdev: add new switchdev_port_bridge_dellink Same change as setlink. Provide the wrapper op for SELF ndo_bridge_dellink and call into the switchdev driver to delete afspec VLANs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:00 +08:00
struct nlattr *afspec;
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
switchdev: Execute bridge ndos only for bridge ports We recently got the following warning after setting up a vlan device on top of an offloaded bridge and executing 'bridge link': WARNING: CPU: 0 PID: 18566 at drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:81 mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [...] CPU: 0 PID: 18566 Comm: bridge Not tainted 4.8.0-rc7 #1 Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 0000000000000286 00000000e64ab94f ffff880406e6f8f0 ffffffff8135eaa3 0000000000000000 0000000000000000 ffff880406e6f930 ffffffff8108c43b 0000005106e6f988 ffff8803df398840 ffff880403c60108 ffff880406e6f990 Call Trace: [<ffffffff8135eaa3>] dump_stack+0x63/0x90 [<ffffffff8108c43b>] __warn+0xcb/0xf0 [<ffffffff8108c56d>] warn_slowpath_null+0x1d/0x20 [<ffffffffa01420d5>] mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [<ffffffffa0142195>] mlxsw_sp_port_attr_get+0xa5/0xb0 [mlxsw_spectrum] [<ffffffff816f151f>] switchdev_port_attr_get+0x4f/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f1d6b>] switchdev_port_bridge_getlink+0x5b/0xc0 [<ffffffff816f2680>] ? switchdev_port_fdb_dump+0x90/0x90 [<ffffffff815f5427>] rtnl_bridge_getlink+0xe7/0x190 [<ffffffff8161a1b2>] netlink_dump+0x122/0x290 [<ffffffff8161b0df>] __netlink_dump_start+0x15f/0x190 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fab46>] rtnetlink_rcv_msg+0x1a6/0x220 [<ffffffff81208118>] ? __kmalloc_node_track_caller+0x208/0x2c0 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fa9a0>] ? rtnl_newlink+0x890/0x890 [<ffffffff8161cf54>] netlink_rcv_skb+0xa4/0xc0 [<ffffffff815f56f8>] rtnetlink_rcv+0x28/0x30 [<ffffffff8161c92c>] netlink_unicast+0x18c/0x240 [<ffffffff8161ccdb>] netlink_sendmsg+0x2fb/0x3a0 [<ffffffff815c5a48>] sock_sendmsg+0x38/0x50 [<ffffffff815c6031>] SYSC_sendto+0x101/0x190 [<ffffffff815c7111>] ? __sys_recvmsg+0x51/0x90 [<ffffffff815c6b6e>] SyS_sendto+0xe/0x10 [<ffffffff817017f2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 The problem is that the 8021q module propagates the call to ndo_bridge_getlink() via switchdev ops, but the switch driver doesn't recognize the netdev, as it's not offloaded. While we can ignore calls being made to non-bridge ports inside the driver, a better fix would be to push this check up to the switchdev layer. Note that these ndos can be called for non-bridged netdev, but this only happens in certain PF drivers which don't call the corresponding switchdev functions anyway. Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19 00:50:23 +08:00
if (!netif_is_bridge_port(dev))
return -EOPNOTSUPP;
switchdev: add new switchdev_port_bridge_dellink Same change as setlink. Provide the wrapper op for SELF ndo_bridge_dellink and call into the switchdev driver to delete afspec VLANs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:00 +08:00
afspec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg),
IFLA_AF_SPEC);
if (afspec)
return switchdev_port_br_afspec(dev, afspec,
switchdev_port_obj_del);
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
switchdev: add new switchdev_port_bridge_dellink Same change as setlink. Provide the wrapper op for SELF ndo_bridge_dellink and call into the switchdev driver to delete afspec VLANs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:00 +08:00
return 0;
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
EXPORT_SYMBOL_GPL(switchdev_port_bridge_dellink);
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
/**
* switchdev_port_fdb_add - Add FDB (MAC/VLAN) entry to port
*
* @ndmsg: netlink hdr
* @nlattr: netlink attributes
* @dev: port device
* @addr: MAC address to add
* @vid: VLAN to add
*
* Add FDB entry to switch device.
*/
int switchdev_port_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
struct net_device *dev, const unsigned char *addr,
u16 vid, u16 nlm_flags)
{
switchdev: rename switchdev_obj_fdb to switchdev_obj_port_fdb Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:44 +08:00
struct switchdev_obj_port_fdb fdb = {
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 23:03:35 +08:00
.obj.orig_dev = dev,
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
.obj.id = SWITCHDEV_OBJ_ID_PORT_FDB,
net: switchdev: abstract object in add/del ops Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:17 +08:00
.vid = vid,
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
};
switchdev: remove pointers from switchdev objects When object is used in deferred work, we cannot use pointers in switchdev object structures because the memory they point at may be already used by someone else. So rather do local copy of the value. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:51 +08:00
ether_addr_copy(fdb.addr, addr);
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
return switchdev_port_obj_add(dev, &fdb.obj);
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
}
EXPORT_SYMBOL_GPL(switchdev_port_fdb_add);
/**
* switchdev_port_fdb_del - Delete FDB (MAC/VLAN) entry from port
*
* @ndmsg: netlink hdr
* @nlattr: netlink attributes
* @dev: port device
* @addr: MAC address to delete
* @vid: VLAN to delete
*
* Delete FDB entry from switch device.
*/
int switchdev_port_fdb_del(struct ndmsg *ndm, struct nlattr *tb[],
struct net_device *dev, const unsigned char *addr,
u16 vid)
{
switchdev: rename switchdev_obj_fdb to switchdev_obj_port_fdb Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:44 +08:00
struct switchdev_obj_port_fdb fdb = {
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 23:03:35 +08:00
.obj.orig_dev = dev,
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
.obj.id = SWITCHDEV_OBJ_ID_PORT_FDB,
net: switchdev: abstract object in add/del ops Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:17 +08:00
.vid = vid,
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
};
switchdev: remove pointers from switchdev objects When object is used in deferred work, we cannot use pointers in switchdev object structures because the memory they point at may be already used by someone else. So rather do local copy of the value. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 01:40:51 +08:00
ether_addr_copy(fdb.addr, addr);
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
return switchdev_port_obj_del(dev, &fdb.obj);
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
}
EXPORT_SYMBOL_GPL(switchdev_port_fdb_del);
struct switchdev_fdb_dump {
switchdev: rename switchdev_obj_fdb to switchdev_obj_port_fdb Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:44 +08:00
struct switchdev_obj_port_fdb fdb;
net: switchdev: move dev in switchdev_fdb_dump The FDB dump callback requires the related net_device so move it to the struct switchdev_fdb_dump superset instead of using a callback param. With this done, it'll be simpler to change the dump function signature. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:14 +08:00
struct net_device *dev;
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
struct sk_buff *skb;
struct netlink_callback *cb;
int idx;
};
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:45 +08:00
static int switchdev_port_fdb_dump_cb(struct switchdev_obj *obj)
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
{
switchdev: bring back switchdev_obj and use it as a generic object param Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:45 +08:00
struct switchdev_obj_port_fdb *fdb = SWITCHDEV_OBJ_PORT_FDB(obj);
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
struct switchdev_fdb_dump *dump =
net: switchdev: pass callback to dump operation Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev dump operation to: int switchdev_port_obj_dump(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of dump operation can now expect this specific structure and call the callback with it. Drivers have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:16 +08:00
container_of(fdb, struct switchdev_fdb_dump, fdb);
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
u32 portid = NETLINK_CB(dump->cb->skb).portid;
u32 seq = dump->cb->nlh->nlmsg_seq;
struct nlmsghdr *nlh;
struct ndmsg *ndm;
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 12:56:45 +08:00
if (dump->idx < dump->cb->args[2])
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
goto skip;
nlh = nlmsg_put(dump->skb, portid, seq, RTM_NEWNEIGH,
sizeof(*ndm), NLM_F_MULTI);
if (!nlh)
return -EMSGSIZE;
ndm = nlmsg_data(nlh);
ndm->ndm_family = AF_BRIDGE;
ndm->ndm_pad1 = 0;
ndm->ndm_pad2 = 0;
ndm->ndm_flags = NTF_SELF;
ndm->ndm_type = 0;
net: switchdev: move dev in switchdev_fdb_dump The FDB dump callback requires the related net_device so move it to the struct switchdev_fdb_dump superset instead of using a callback param. With this done, it'll be simpler to change the dump function signature. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:14 +08:00
ndm->ndm_ifindex = dump->dev->ifindex;
net: switchdev: pass callback to dump operation Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev dump operation to: int switchdev_port_obj_dump(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of dump operation can now expect this specific structure and call the callback with it. Drivers have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:16 +08:00
ndm->ndm_state = fdb->ndm_state;
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
net: switchdev: pass callback to dump operation Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev dump operation to: int switchdev_port_obj_dump(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of dump operation can now expect this specific structure and call the callback with it. Drivers have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:16 +08:00
if (nla_put(dump->skb, NDA_LLADDR, ETH_ALEN, fdb->addr))
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
goto nla_put_failure;
net: switchdev: pass callback to dump operation Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev dump operation to: int switchdev_port_obj_dump(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of dump operation can now expect this specific structure and call the callback with it. Drivers have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:16 +08:00
if (fdb->vid && nla_put_u16(dump->skb, NDA_VLAN, fdb->vid))
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
goto nla_put_failure;
nlmsg_end(dump->skb, nlh);
skip:
dump->idx++;
return 0;
nla_put_failure:
nlmsg_cancel(dump->skb, nlh);
return -EMSGSIZE;
}
/**
* switchdev_port_fdb_dump - Dump port FDB (MAC/VLAN) entries
*
* @skb: netlink skb
* @cb: netlink callback
* @dev: port device
* @filter_dev: filter device
* @idx:
*
switchdev: fix typo in comments/doc Two minor typo. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-24 23:50:00 +08:00
* Dump FDB entries from switch device.
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
*/
int switchdev_port_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb,
struct net_device *dev,
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 12:56:45 +08:00
struct net_device *filter_dev, int *idx)
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
{
struct switchdev_fdb_dump dump = {
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 23:03:35 +08:00
.fdb.obj.orig_dev = dev,
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:46 +08:00
.fdb.obj.id = SWITCHDEV_OBJ_ID_PORT_FDB,
net: switchdev: move dev in switchdev_fdb_dump The FDB dump callback requires the related net_device so move it to the struct switchdev_fdb_dump superset instead of using a callback param. With this done, it'll be simpler to change the dump function signature. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 00:07:14 +08:00
.dev = dev,
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
.skb = skb,
.cb = cb,
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 12:56:45 +08:00
.idx = *idx,
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
};
net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump. When the send skbuff reaches the end, nlmsg_put and friends returns -EMSGSIZE but it is silently thrown away in ndo_fdb_dump. It is called within a for_each_netdev loop and the first fdb entry of a following netdev could fit in the remaining skbuff. This breaks the mechanism of cb->args[0] and idx to keep track of the entries that are already dumped, which results missing entries in bridge fdb show command. Signed-off-by: Minoura Makoto <minoura@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25 13:20:48 +08:00
int err;
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump. When the send skbuff reaches the end, nlmsg_put and friends returns -EMSGSIZE but it is silently thrown away in ndo_fdb_dump. It is called within a for_each_netdev loop and the first fdb entry of a following netdev could fit in the remaining skbuff. This breaks the mechanism of cb->args[0] and idx to keep track of the entries that are already dumped, which results missing entries in bridge fdb show command. Signed-off-by: Minoura Makoto <minoura@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25 13:20:48 +08:00
err = switchdev_port_obj_dump(dev, &dump.fdb.obj,
switchdev_port_fdb_dump_cb);
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 12:56:45 +08:00
*idx = dump.idx;
return err;
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
}
EXPORT_SYMBOL_GPL(switchdev_port_fdb_dump);
net/switchdev: Export the same parent ID service function This helper serves to know if two switchdev port netdevices belong to the same HW ASIC, e.g to figure out if forwarding offload is possible between them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14 15:32:43 +08:00
bool switchdev_port_same_parent_id(struct net_device *a,
struct net_device *b)
switchdev: add offload_fwd_mark generator helper skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be unique for device and may even be unique for a sub-set of ports within device, so add switchdev helper function to generate unique marks based on port's switch ID and group_ifindex. group_ifindex would typically be the container dev's ifindex, such as the bridge's ifindex. The generator uses a global hash table to store offload_fwd_marks hashed by {switch ID, group_ifindex} key. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-19 09:24:50 +08:00
{
struct switchdev_attr a_attr = {
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 23:03:35 +08:00
.orig_dev = a,
switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_* To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:42 +08:00
.id = SWITCHDEV_ATTR_ID_PORT_PARENT_ID,
switchdev: add offload_fwd_mark generator helper skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be unique for device and may even be unique for a sub-set of ports within device, so add switchdev helper function to generate unique marks based on port's switch ID and group_ifindex. group_ifindex would typically be the container dev's ifindex, such as the bridge's ifindex. The generator uses a global hash table to store offload_fwd_marks hashed by {switch ID, group_ifindex} key. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-19 09:24:50 +08:00
};
struct switchdev_attr b_attr = {
switchdev: Pass original device to port netdev driver switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 23:03:35 +08:00
.orig_dev = b,
switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_* To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 17:03:42 +08:00
.id = SWITCHDEV_ATTR_ID_PORT_PARENT_ID,
switchdev: add offload_fwd_mark generator helper skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be unique for device and may even be unique for a sub-set of ports within device, so add switchdev helper function to generate unique marks based on port's switch ID and group_ifindex. group_ifindex would typically be the container dev's ifindex, such as the bridge's ifindex. The generator uses a global hash table to store offload_fwd_marks hashed by {switch ID, group_ifindex} key. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-19 09:24:50 +08:00
};
if (switchdev_port_attr_get(a, &a_attr) ||
switchdev_port_attr_get(b, &b_attr))
return false;
return netdev_phys_item_id_same(&a_attr.u.ppid, &b_attr.u.ppid);
}
switchdev: Put export declaration in the right place Move exporting of switchdev_port_same_parent_id to be right below it and not elsewhere. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15 19:51:54 +08:00
EXPORT_SYMBOL_GPL(switchdev_port_same_parent_id);
Copy Permalink