2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-11-23 18:14:04 +08:00
linux-next/drivers/regulator/s2mpa01.c

391 lines
10 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0+
//
// Copyright (c) 2013 Samsung Electronics Co., Ltd
// http://www.samsung.com
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mpa01.h>
struct s2mpa01_info {
int ramp_delay24;
int ramp_delay3;
int ramp_delay5;
int ramp_delay16;
int ramp_delay7;
int ramp_delay8910;
};
static int get_ramp_delay(int ramp_delay)
{
unsigned char cnt = 0;
ramp_delay /= 6250;
while (true) {
ramp_delay = ramp_delay >> 1;
if (ramp_delay == 0)
break;
cnt++;
}
if (cnt > 3)
cnt = 3;
return cnt;
}
static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
unsigned int ramp_delay = 0;
int old_volt, new_volt;
switch (rdev_get_id(rdev)) {
case S2MPA01_BUCK2:
case S2MPA01_BUCK4:
ramp_delay = s2mpa01->ramp_delay24;
break;
case S2MPA01_BUCK3:
ramp_delay = s2mpa01->ramp_delay3;
break;
case S2MPA01_BUCK5:
ramp_delay = s2mpa01->ramp_delay5;
break;
case S2MPA01_BUCK1:
case S2MPA01_BUCK6:
ramp_delay = s2mpa01->ramp_delay16;
break;
case S2MPA01_BUCK7:
ramp_delay = s2mpa01->ramp_delay7;
break;
case S2MPA01_BUCK8:
case S2MPA01_BUCK9:
case S2MPA01_BUCK10:
ramp_delay = s2mpa01->ramp_delay8910;
break;
}
if (ramp_delay == 0)
ramp_delay = rdev->desc->ramp_delay;
old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
}
static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2;
unsigned int ramp_enable = 1, enable_shift = 0;
int ret;
switch (rdev_get_id(rdev)) {
case S2MPA01_BUCK1:
enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mpa01->ramp_delay16)
s2mpa01->ramp_delay16 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay16;
ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
break;
case S2MPA01_BUCK2:
enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mpa01->ramp_delay24)
s2mpa01->ramp_delay24 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay24;
ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
ramp_reg = S2MPA01_REG_RAMP1;
break;
case S2MPA01_BUCK3:
enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
s2mpa01->ramp_delay3 = ramp_delay;
ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT;
ramp_reg = S2MPA01_REG_RAMP1;
break;
case S2MPA01_BUCK4:
enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mpa01->ramp_delay24)
s2mpa01->ramp_delay24 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay24;
ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
ramp_reg = S2MPA01_REG_RAMP1;
break;
case S2MPA01_BUCK5:
s2mpa01->ramp_delay5 = ramp_delay;
ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT;
break;
case S2MPA01_BUCK6:
if (ramp_delay > s2mpa01->ramp_delay16)
s2mpa01->ramp_delay16 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay16;
ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
break;
case S2MPA01_BUCK7:
s2mpa01->ramp_delay7 = ramp_delay;
ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT;
break;
case S2MPA01_BUCK8:
case S2MPA01_BUCK9:
case S2MPA01_BUCK10:
if (ramp_delay > s2mpa01->ramp_delay8910)
s2mpa01->ramp_delay8910 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay8910;
ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT;
break;
default:
return 0;
}
if (!ramp_enable)
goto ramp_disable;
/* Ramp delay can be enabled/disabled only for buck[1234] */
if (rdev_get_id(rdev) >= S2MPA01_BUCK1 &&
rdev_get_id(rdev) <= S2MPA01_BUCK4) {
ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
1 << enable_shift, 1 << enable_shift);
if (ret) {
dev_err(&rdev->dev, "failed to enable ramp rate\n");
return ret;
}
}
ramp_val = get_ramp_delay(ramp_delay);
return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
ramp_val << ramp_shift);
ramp_disable:
return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
1 << enable_shift, 0);
}
static const struct regulator_ops s2mpa01_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
static const struct regulator_ops s2mpa01_buck_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = s2mpa01_regulator_set_voltage_time_sel,
.set_ramp_delay = s2mpa01_set_ramp_delay,
};
#define regulator_desc_ldo(num, step) { \
.name = "LDO"#num, \
.of_match = of_match_ptr("LDO"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = S2MPA01_LDO##num, \
.ops = &s2mpa01_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MIN_800_MV, \
.uV_step = step, \
.n_voltages = S2MPA01_LDO_N_VOLTAGES, \
.vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPA01_LDO_VSEL_MASK, \
.enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck1_4(num) { \
.name = "BUCK"#num, \
.of_match = of_match_ptr("BUCK"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = S2MPA01_BUCK##num, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MIN_600_MV, \
.uV_step = STEP_6_25_MV, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B1CTRL1 + (num - 1) * 2, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck5 { \
.name = "BUCK5", \
.of_match = of_match_ptr("BUCK5"), \
.regulators_node = of_match_ptr("regulators"), \
.id = S2MPA01_BUCK5, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MIN_800_MV, \
.uV_step = STEP_6_25_MV, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B5CTRL2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B5CTRL1, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck6_10(num, min, step) { \
.name = "BUCK"#num, \
.of_match = of_match_ptr("BUCK"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = S2MPA01_BUCK##num, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = min, \
.uV_step = step, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B6CTRL1 + (num - 6) * 2, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
static const struct regulator_desc regulators[] = {
regulator_desc_ldo(1, STEP_25_MV),
regulator_desc_ldo(2, STEP_50_MV),
regulator_desc_ldo(3, STEP_50_MV),
regulator_desc_ldo(4, STEP_50_MV),
regulator_desc_ldo(5, STEP_25_MV),
regulator_desc_ldo(6, STEP_25_MV),
regulator_desc_ldo(7, STEP_50_MV),
regulator_desc_ldo(8, STEP_50_MV),
regulator_desc_ldo(9, STEP_50_MV),
regulator_desc_ldo(10, STEP_50_MV),
regulator_desc_ldo(11, STEP_50_MV),
regulator_desc_ldo(12, STEP_50_MV),
regulator_desc_ldo(13, STEP_50_MV),
regulator_desc_ldo(14, STEP_50_MV),
regulator_desc_ldo(15, STEP_50_MV),
regulator_desc_ldo(16, STEP_50_MV),
regulator_desc_ldo(17, STEP_50_MV),
regulator_desc_ldo(18, STEP_50_MV),
regulator_desc_ldo(19, STEP_50_MV),
regulator_desc_ldo(20, STEP_50_MV),
regulator_desc_ldo(21, STEP_50_MV),
regulator_desc_ldo(22, STEP_50_MV),
regulator_desc_ldo(23, STEP_50_MV),
regulator_desc_ldo(24, STEP_50_MV),
regulator_desc_ldo(25, STEP_50_MV),
regulator_desc_ldo(26, STEP_25_MV),
regulator_desc_buck1_4(1),
regulator_desc_buck1_4(2),
regulator_desc_buck1_4(3),
regulator_desc_buck1_4(4),
regulator_desc_buck5,
regulator_desc_buck6_10(6, MIN_600_MV, STEP_6_25_MV),
regulator_desc_buck6_10(7, MIN_600_MV, STEP_6_25_MV),
regulator_desc_buck6_10(8, MIN_800_MV, STEP_12_5_MV),
regulator_desc_buck6_10(9, MIN_1500_MV, STEP_12_5_MV),
regulator_desc_buck6_10(10, MIN_1000_MV, STEP_12_5_MV),
};
static int s2mpa01_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct s2mpa01_info *s2mpa01;
int i;
s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
if (!s2mpa01)
return -ENOMEM;
config.dev = iodev->dev;
config.regmap = iodev->regmap_pmic;
config.driver_data = s2mpa01;
for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
struct regulator_dev *rdev;
rdev = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "regulator init failed for %d\n",
i);
return PTR_ERR(rdev);
}
}
return 0;
}
static const struct platform_device_id s2mpa01_pmic_id[] = {
{ "s2mpa01-pmic", 0},
{ },
};
MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id);
static struct platform_driver s2mpa01_pmic_driver = {
.driver = {
.name = "s2mpa01-pmic",
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14 Probing of regulators can be a slow operation and can contribute to slower boot times. This is especially true if a regulator is turned on at probe time (with regulator-boot-on or regulator-always-on) and the regulator requires delays (off-on-time, ramp time, etc). While the overall kernel is not ready to switch to async probe by default, as per the discussion on the mailing lists [1] it is believed that the regulator subsystem is in good shape and we can move regulator drivers over wholesale. There is no way to just magically opt in all regulators (regulators are just normal drivers like platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all regulators found in 'drivers/regulator' individually. Given the number of drivers touched and the impossibility to test this ahead of time, it wouldn't be shocking at all if this caused a regression for someone. If there is a regression caused by this patch, it's likely to be one of the cases talked about in [1]. As a "quick fix", drivers involved in the regression could be fixed by changing them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix would be to directly fix the problem that caused the issue with async probe. The approach here follows a similar approach that was used for the mmc subsystem several years ago [2]. In fact, I ran nearly the same python script to auto-generate the changes. The only thing I changed was to search for "i2c_driver", "spmi_driver", and "spi_driver" in addition to "platform_driver". [1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk [2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/ Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-17 03:54:38 +08:00
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
.probe = s2mpa01_pmic_probe,
.id_table = s2mpa01_pmic_id,
};
module_platform_driver(s2mpa01_pmic_driver);
/* Module information */
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
MODULE_DESCRIPTION("Samsung S2MPA01 Regulator Driver");
MODULE_LICENSE("GPL");