522 lines
31 KiB
Plaintext
522 lines
31 KiB
Plaintext
Include("cust_pmic_batt_enchilada.asl")
|
||
|
||
//
|
||
// PMIC Battery Manger Driver
|
||
//
|
||
Device (PMBT) {
|
||
Name (_HID, "QCOM0264")
|
||
Alias(\_SB.PSUB, _SUB)
|
||
Name (_DEP, Package(0x2) {
|
||
\_SB_.PMIC,
|
||
\_SB_.ADC1,
|
||
//\_SB_.PEIC
|
||
})
|
||
|
||
Method (_STA) {
|
||
Return (0xB) // Device is installable, functional & should not be visible in OSPM/Device Manager
|
||
}
|
||
|
||
Method (_CRS, 0x0, NotSerialized) {
|
||
Name (RBUF, ResourceTemplate ()
|
||
{
|
||
//GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.PM01",,,,) {208} // 0x80 - PM_INT__SCHG_CHGR__CHGR_ERROR_RT_STS - Charger Error Interrupt
|
||
//GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {336} // 0x210 - PM_INT__FG_BCL__IBT_HI - IBAT greater than threshold Interrupt.
|
||
//GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {337} // 0x211 - PM_INT__FG_BCL__IBT_THI - VBatt less than threshold Interrupt
|
||
//GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {352} // 0x220 - PM_INT__FG_MEM_IF__IMA_RDY - MEMIF access Interrupt
|
||
//GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {215} // 0x87 - PM_INT__SCHG_CHGR__CHGR_7 - Termination Current Interrupt
|
||
//GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {209} // 0x81 - PM_INT__SCHG_CHGR__CHARGING_STATE_CHANGE - Charger Inhibit Interrupt
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {329} // 0x209 - PM_INT__FG_BATT_INFO__VBT_LOW - VBAT_LOW Interrupt
|
||
//GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.PM01",,,,) {240} // 0xA0 - PM_INT__SCHG_DC__DCIN_COLLAPSE - Qi Wireless Charger Interrupt
|
||
GpioInt(Edge, ActiveHigh, Exclusive, PullUp, 0, "\\_SB.PM01",,,,) {331} // 0x20B - PM_INT__FG_BATT_INFO__BT_MISS - BATT_MISSING Interrupt
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {237} // 0x9D - PM_INT__SCHG_USB__USBIN_SOURCE_CHANGE - AICL_DONE IRQ (Rising Only)
|
||
//GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {232} // 0x98 - PM_INT__SCHG_USB__USBIN_COLLAPSE - USB_UV IRQ (Rising Only)
|
||
//GpioInt(Edge, ActiveHigh, Exclusive, PullUp, 0, "\\_SB.PM01",,,,) {322} // 0x202 - PM_INT__FG_BATT_SOC__BSOC_DELTA - FULL_SOC Interrupt
|
||
//GpioInt(Edge, ActiveHigh, Exclusive, PullUp, 0, "\\_SB.PM01",,,,) {323} // 0x203 - PM_INT__FG_BATT_SOC__MSOC_DELTA - EMPTY_SOC Interrupt
|
||
// GpioInt(Edge, ActiveHigh, Exclusive, PullUp, 0, "\\_SB.PM01",,,,) {213} // 0x85 - PM_INT__SCHG_CHGR__FG_FVCAL_QUALIFIED - FVCAL_QUALIFIED IRQ
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {224} // 0x90 - PM_INT__SCHG_BATIF__BAT_TEMP - Jeita limit interrupt
|
||
|
||
})
|
||
Return (RBUF)
|
||
}
|
||
|
||
//ACPI methods for Battery Manager Device
|
||
Method (BMNR) {
|
||
Name (CFG0,
|
||
Package(){
|
||
1, //* 0: Select Platform: 0- No HW, 1- SMChg+FGGge, 2- SMB3pChg+SMB3pGge, 3- LBChg+VMBMS
|
||
0, //* 1: Error State Handling: 0- Don’t Shutdown, 1- Shutdown
|
||
1, //* 2: Listen to BatteryClass: 0- No 1- Yes
|
||
0, //* 3: Test Mode Power Flag: 0- Discharging, 1- PowerOnline+Charging
|
||
"CUST_PMIC" //* 4: cust_pmic config identifier
|
||
})
|
||
Store(CUST, Index(CFG0, 4))
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for Timer
|
||
Method (BTIM) {
|
||
Name (CFG0,
|
||
Package(){
|
||
30000, // Charging Heartbeat Timer
|
||
10000, // Charging Tolerable Delay
|
||
300000, // Discharging Heartbeat Timer
|
||
120000, // Discharging Tolerable Delay
|
||
0, // Poll Timer , 0=Timer not used.
|
||
0, // Poll Tolerable Delay
|
||
28080000, //Charging Timeout (TDone) Timer
|
||
0, //Charging Timeout(TDone) Tolerable Delay
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
|
||
|
||
//ACPI methods for Battery Info
|
||
Method (BBAT) {
|
||
Name (CFG0,
|
||
Package(){
|
||
1, //* 0: Battery Technology
|
||
0x4C494F4E, //* 1: Battery Chemistry: hex(LION)
|
||
0xFFFFFFFF, //* 2: BFCC: (mWh), Design Capacity
|
||
0xFFFFFFFF, //* 3: BFCC: (mWh), Full Charge Capacity
|
||
0xFFFFFFFF, //* 4: PCT1: (% of FCC), Default Alert 1
|
||
0xFFFFFFFF, //* 5: PCT2: (% of FCC), Default Alert 2
|
||
"QCOMBATT01", //* 6: Device Name
|
||
"Qualcomm", //* 7: Manufacture Name
|
||
"QCOMBAT01_07012011", //* 8: Battery Unique ID
|
||
"07012011", //* 9: Battery Serial Number
|
||
19, //* 10: Battery Manufacture Date
|
||
04, //* 11: Battery Manufacture Month
|
||
2014 //* 12: Battery Manufacture Year
|
||
})
|
||
//Local2 = Default Alert1 = PCT1 * BFCC / 100
|
||
Multiply(PCT1,BFCC,Local0)
|
||
Divide(Local0, 100, Local1, Local2)
|
||
//Local3 = Default Alert2 = PCT2 * BFCC / 100
|
||
Multiply(PCT2,BFCC,Local0)
|
||
Divide(Local0, 100, Local1, Local3)
|
||
Store(BFCC, Index(CFG0, 2))
|
||
Store(BFCC, Index(CFG0, 3))
|
||
Store(Local2, Index(CFG0, 4))
|
||
Store(Local3, Index(CFG0, 5))
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for Proprietary chargers
|
||
Method (BPCH) {
|
||
Name (CFG0,
|
||
Package(){
|
||
3000, // QC2.0 charger current = 3000mA
|
||
3000, // QC3.0 charger current = 3000mA
|
||
1500 // Invalid Wall charger current = 1500mA
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for foldback chargers
|
||
Method (BFCH) {
|
||
Name (CFG0,
|
||
Package(){
|
||
1, // Feature enable/disable
|
||
5, // No of consecutive times charger attach/detach
|
||
5000, // msecs, Time elapsed between attach/detach
|
||
900, // mA, Current setting for foldback charger
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for coin cell charger
|
||
Method (BCCC) {
|
||
Name (CFG0,
|
||
Package(){
|
||
1, //Enable coin cell charger; 1 = enable, 0 = disable
|
||
0, // RSET, 0=2K1, 1=1K7, 2=1K2, 3 = 0K8
|
||
0 // VSET, 0=2V5, 1=3V2, 2=3V1, 3=3V0
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for Recharge/Maintenance Mode
|
||
Method (BRCH) {
|
||
Name (CFG0,
|
||
Package(){
|
||
100, // Delta V Recharge threshold = 100mV
|
||
0 // Delta V Recharge Reduction below Normal= 0mV
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for Qi Charging
|
||
Method (_BQI) {
|
||
Name (CFG0,
|
||
Package(){
|
||
0,
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for Interrupt Name
|
||
Method (BIRQ) {
|
||
Name (CFG0,
|
||
Package(){
|
||
//"ChgError", //Charger Error
|
||
//"BclIrq1", //IBAT greater than threshold IRQ
|
||
//"BclIrq2", // VBAT less than threshold IRQ
|
||
//"MEMIFaccess", //MEMIF access granted IRQ
|
||
//"TccReached", // Termination Current IRQ
|
||
// "ChargerInhibit" // Charger Inhibit IRQ
|
||
"VbatLow", // VBAT LOW IRQ
|
||
//"QiWlcDet", // Qi charging
|
||
"BattMissing", // BATT_MISSING IRQ
|
||
"AiclDone", // AICL Done
|
||
// "UsbUv", //USB UV
|
||
//"SOCFull", //SOC Full IRQ
|
||
//"SOCEmpty", //SOC Empty IRQ
|
||
//"FvCal", //FVCAl IRQ
|
||
"JeitaLimit" //JEITA limit IRQ
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
//ACPI methods for Platform File
|
||
Method (BPLT) {
|
||
Name (CFG0,
|
||
Package(){
|
||
1024, //* 0: ACPI Version
|
||
0xFFFFFFFF, //* 1: VNOM: (mV), Nominal Battery Voltage
|
||
0xFFFFFFFF, //* 2: VLOW: (mV), Low Battery Voltage
|
||
0xFFFFFFFF, //* 3: EMPT: (mV), VcutOff
|
||
0xFFFFFFFF, //* 4: DCMA: (mA), DC Current
|
||
1, //* 5: ChargePath Priority: Select 0 for DC, 1 for USB
|
||
50, //* 6: RSLOW for maxFlashCurrentPrediction
|
||
50, //* 7: RPARA for maxFlashCurrentPrediction
|
||
5000, //* 8: VINFLASH for maxFlashCurrentPrediction
|
||
8, //* 9: FlashParam for maxFlashCurrentPrediction
|
||
1, //* 10: AFP Mode Supported
|
||
80, //* 11: AFP Trigger Max Battery Temp (+80 deg C)
|
||
0xFFFFFFEC, //* 12: AFP Trigger Min Battery Temp (-20 deg C)
|
||
72, //* 13: Watchdog timer in secs
|
||
100, //* 14: Charger iterm 100 mA for now
|
||
30, //* 15: SRAM logging timer
|
||
5, //* 16: VBATT average Window Size
|
||
6, //* 17: Emergency Shutdown Initial SOC
|
||
500, //* 18: SoC convergent point
|
||
126, //* 19: LM_Threshold
|
||
400, //* 20: MH_Threshold
|
||
0xFFFFFFFF, //* 21: BOCP: (mA), OCP current used in BCL
|
||
750, //* 22: soc (75%) below which no soc linearization even in CV charging
|
||
1, //* 23: BMD - Battery Missing Detection Source when source is attached: BATT_ID (1=BATT_ID, 4=HW Misssing Algorithm)
|
||
2, //* 24: ibat src sensing : 0 for batfet and 1 for external sensing
|
||
50, //* 25: IFGD: (mA), FG Iterm delta; (iterm + this value) determines when FG report 100%
|
||
10, //* 26: VFGD: (mV), CC to CV Vdelta; (Vfloat - this value) determine when FG report 100%
|
||
1, //* 27: 0 - disable SOC linearization; 1 (nonzero): enable SOC linearization
|
||
0xFFFFFFEC, //* 28: (Celcius), Temperature threshold do have different SOC slope limiter
|
||
10, //* 29: (milli%) - SOC slope limiter when charging and at lower temperature than threshold
|
||
10, //* 30: (milli%) - SOC slope limiter when charging and at higher temperature than threshold
|
||
10, //* 31: (milli%) - SOC slope limiter when discharging and at lower temperature than threshold
|
||
10, //* 32: (milli%) - SOC slope limiter when discharging and at higher temperature than threshold
|
||
1, //* 33: 0 - disable FCC learning; 1 (nonzero): enable FCC leearning
|
||
150, //* 34: maximum starting SOC (in tenth percent)at which FCC learning would be turned on during charging
|
||
100, //* 35: maximum allowable decrement (in tenth percent) of battery capacity in FCC learning
|
||
5, //* 36: maximum allowable increment (in tenth percent) of battery capacity in FCC learning
|
||
10, //* 37: battery temperature in degree C below which switch to low temp ESR update steps
|
||
0x02, //* 38: ESR update step tight, (2 * 0.001953 = 0.0039 = 0.4% max change each update)
|
||
0x33, //* 39: ESR update step broad, (51* 0.001953 = 0.099603 = 10% max change each update)
|
||
0x02, //* 40: ESR update step tight at low temp (below 10 degree, 0.4% max change each update)
|
||
0x0A, //* 41: ESR update step broad at low temp (below 10 degree, 2% max change each update)
|
||
0, //* 42: mOhm, RConn
|
||
0, //* 43: Type C Thermal Mitigation Enable
|
||
70, //* 44: Temperature to arm mitigation (degree C)
|
||
50, //* 45: ICL adjustment (percent)
|
||
60 //* 46: Temperature to disarm mitigation (degree C)
|
||
})
|
||
Store(VNOM, Index(CFG0, 1))
|
||
Store(VLOW, Index(CFG0, 2))
|
||
Store(EMPT, Index(CFG0, 3))
|
||
Store(DCMA, Index(CFG0, 4))
|
||
Store(BOCP, Index(CFG0, 21))
|
||
Store(IFGD, Index(CFG0, 25))
|
||
Store(VFGD, Index(CFG0, 26))
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for Platform File
|
||
Method (BPTM) {
|
||
Name (CFG0,
|
||
Package(){
|
||
15000, // Emergency Timer
|
||
0, // Emergency Tolerable Delay
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
|
||
//*****************************************************
|
||
// Battery Charge Table 1 (BCT1)
|
||
// Notes: used in Method(BJTA) & Method (BAT1)
|
||
//*****************************************************
|
||
Name (BCT1, Package(){
|
||
4350, //* 0: VDD1: (mV), Float Voltage (FV)
|
||
2100, //* 1: FCC1: (mA), Full Charge Current (FCC)
|
||
0, //* 2: HCLI: (C) hard cold limit - at which temperature charging will be disabled
|
||
10, //* 3: SCLI: (C) soft cold limit - at which temperature charge current/float voltage will be reduced to JEITA compensated value
|
||
45, //* 4: SHLI: (C) soft hot limit - at which temperature float voltage/charge current will be reduced to JEITA compensated value
|
||
55, //* 5: HHLI: (C) hard hot limit - at which temperature charging will be disabled
|
||
105, //* 6: FVC1: (mV) Float Voltage compensation (amount of FV reduction) when in battery hot-soft limit
|
||
0, //* 7: (mV) Float Voltage compensation (amount of FV reduction) when in battery cold-soft limit
|
||
//* notes: put 0 value to disable
|
||
//* These values (10 vs 11) should be the same when HW JEITA is enabled
|
||
0, //* 8: (mA) Charge Current compensation (amount of CC reduction) when in battery hot-soft limit
|
||
1000, //* 9: CCC1: (mA) Charge Current compensation (amount of CC reduction) when in battery cold-soft limit
|
||
//* notes: put 0 value to disable
|
||
//* These values (12 vs 13) should be the same when HW JEITA is enabled
|
||
})
|
||
|
||
//ACPI methods for JEITA
|
||
Method (BJTA) {
|
||
Name (CFG0,
|
||
Package(){
|
||
2, //* 0: Select JEITA Configuration: 0- No JEITA, 1- SW JEITA, 2- HW JEITA
|
||
2, //* 1: Temperature Hysteresis (in deg C)
|
||
Package(0xa){0,0,0,0,0,0,0,0,0,0}
|
||
//* 2: Structure for default charge table
|
||
})
|
||
Store(VDD1, Index(\_SB_.PMBT.BCT1, 0))
|
||
Store(FCC1, Index(\_SB_.PMBT.BCT1, 1))
|
||
Store(HCLI, Index(\_SB_.PMBT.BCT1, 2))
|
||
Store(SCLI, Index(\_SB_.PMBT.BCT1, 3))
|
||
Store(SHLI, Index(\_SB_.PMBT.BCT1, 4))
|
||
Store(HHLI, Index(\_SB_.PMBT.BCT1, 5))
|
||
Store(FVC1, Index(\_SB_.PMBT.BCT1, 6))
|
||
Store(CCC1, Index(\_SB_.PMBT.BCT1, 9))
|
||
|
||
//Use BCT1 as the Default Charge Table
|
||
Store(\_SB_.PMBT.BCT1, Index(CFG0, 2))
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for Battery-1 (Ascent 860-82209-0000 3450mAh)
|
||
Method (BAT1)
|
||
{
|
||
Name (CFG0,
|
||
Package(){
|
||
0, //* 0: Battery Category: 0-NORMAL, 1-SMART
|
||
0xFFFFFFEC, //* 1: min operating battery temp (-20 deg C)
|
||
65, //* 2: max operating battery temp (+65 deg C)
|
||
Package(4){0,0,0,0}, //* 3: 128-bit battery info for future expansion
|
||
Package(0xa){0,0,0,0,0,0,0,0,0,0}
|
||
//* 4: Structure for charge table
|
||
})
|
||
|
||
//assign Charge Table to BCT1
|
||
//Notes: 1) If the default charge table and desire charge table are different,
|
||
// Create another table (ex: BCT2) with the same structure as BCT1 and modify BCT1 below with the new table name
|
||
// 2) Method(BJTA) is parsed before this(BAT1) method in Battmngr module
|
||
// Method(BJTA) may be updating BCT1 parameters using configuration from cust_pmic_batt.asl (refer to BJTA method details)
|
||
// If BAT1 desires different value to be used (than what used in BJTA), pls change/update relevant parameter(s) here.
|
||
Store(\_SB_.PMBT.BCT1, Index(CFG0, 4))
|
||
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for Battery Error Handling
|
||
Method (BEHC)
|
||
{
|
||
//Actions for Battery Error Handling
|
||
// 0x0 - Do Nothing
|
||
// 0x1 - Reload Charge Table
|
||
// 0x2 - Error Shutdown
|
||
// 0x4 - Emergency Shutdown
|
||
// 0x8 - Enter Test Mode
|
||
Name (CFG0,
|
||
Package(){
|
||
1, //1-Feature Enable, 0-Feature Disable
|
||
0x8, //Action(s) for DEBUG state -> Enter Test Mode
|
||
0x1, //Action(s) for NORMAL state -> Reload Charge Table
|
||
0x0, //Action(s) for SMART_AUTHENTICATED state -> Do nothing
|
||
0x0, //Action(s) for UNKNOWN state -> Do nothing
|
||
0x2, //Action(s) for NOT_PRESENT state -> Error Shutdown
|
||
0x2, //Action(s) for INVALID state -> Error Shutdown
|
||
0x4 //Action(s) for OUT_OP_RANGE state -> AFP for out of operational range
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for Charge Table Management Configuration
|
||
Method (CTMC)
|
||
{
|
||
Name (CFG0,
|
||
Package(){
|
||
2000, //* 0: min RID for DEBUG category: 2K
|
||
14000, //* 1: max RID for DEBUG category: 14K
|
||
0xFFFFFFFF, //* 2: RID2: min RID for NORMAL category: 15K
|
||
0xFFFFFFFF, //* 3: RID3: max RID for NORMAL category: 140K
|
||
240000, //* 4: min RID for SMART category: 240K
|
||
450000, //* 5: max RID for SMART category: 450K
|
||
1, //* 6: Number of charging table
|
||
})
|
||
Store(RID2, Index(CFG0, 2))
|
||
Store(RID3, Index(CFG0, 3))
|
||
Return (CFG0)
|
||
}
|
||
|
||
//ACPI methods for Parallel Charging
|
||
Method (BMPC) {
|
||
Name (CFG0,
|
||
Package(){
|
||
0, //* 0: Feaature Enable. 1: Enabled, 0: Disable
|
||
1, //* 1: Input Power Disctribution (HW) configuration: 0: MID-MID, 1: USBIN-USBIN
|
||
7000, //* 2: (mW) Input Power Threshold to decide if parallel charging to be enabled or not
|
||
//* Note: Not applicable for MID-MID configuration
|
||
1000, //* 3: (mA) Charge Current Threshold to decide if parallel charging to be enabled or not
|
||
50, //* 4: (%) Slave Charger Initial Power Distribution
|
||
60, //* 5: (mV) Slave Charger Float Voltage Headroom
|
||
500, //* 6: (mA) Slave Charger Charge Current Done Threshold
|
||
90, //* 7: Slave Charger Minimum Efficiency
|
||
0, //* 8: Slave Charger HW ID. 0: SMB1380/1
|
||
70, //* 9: (%)Slave Charger Max Power Distribution: 70%
|
||
0, //* 10: (%)Slave Charger Min Power Distribution: 0%
|
||
Package(0x4)//* 11: Thermal Balancing Configuration
|
||
{
|
||
5, //11.1: (C)Temperature Difference to trigger thermal balancing. 0 to disable the feature
|
||
5, //11.2: (%)Step to redistrubute the power
|
||
120, //11.3: (Sec)Minimum Wait Time for each redistribution attempt
|
||
5, //11.4: (C)Temperature Margin for Master Charger
|
||
}
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
}
|
||
|
||
//
|
||
// PMIC Battery Miniclass Driver
|
||
//
|
||
Device (PMBM) {
|
||
Name (_HID, "QCOM0263")
|
||
Alias(\_SB.PSUB, _SUB)
|
||
Name (_DEP, Package(0x1)
|
||
{
|
||
\_SB_.PMBT
|
||
})
|
||
|
||
Method (_CRS, 0x0, NotSerialized) {
|
||
Name (RBUF, ResourceTemplate () {
|
||
})
|
||
Return (RBUF)
|
||
}
|
||
|
||
Method (_STA) {
|
||
Return (0xB) // Device is installable, functional & should not be visible in OSPM/Device Manager
|
||
}
|
||
}
|
||
|
||
//
|
||
//FGBCL Driver
|
||
//
|
||
Device (BCL1) {
|
||
Name (_HID, "QCOM02D6")
|
||
Alias(\_SB.PSUB, _SUB)
|
||
Name (_DEP, Package(0x1)
|
||
{
|
||
\_SB_.PMIC
|
||
})
|
||
|
||
Method (_STA) {
|
||
Return (0xB) // Device is installable, functional & should not be visible in OSPM/Device Manager
|
||
}
|
||
|
||
Method (_CRS, 0x0, NotSerialized) {
|
||
Name (RBUF, ResourceTemplate () {
|
||
GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.PM01",,,,RawDataBuffer(){0x08}) {64} // 0x1E8 - PM_INT__BCL_COMP__VCOMP_LOW0 - VCOMP_LOW0 IRQ
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {65} // 0x1E9 - PM_INT__BCL_COMP__VCOMP_LOW1 - VCOMP_LOW1 IRQ
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {66} // 0x1EA - PM_INT__BCL_COMP__VCOMP_LOW2 - VCOMP_LOW2 IRQ
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {67} // 0x1EB - PM_INT__BCL_COMP__VCOMP_HI - VCOMP_HI IRQ
|
||
//GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {68} // 0x1EC - PM_INT__BCL_COMP__SYS_OK - SYS_OK IRQ
|
||
//GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {72} // 0x1F0 - PM_INT__BCL_PLM__VCOMP_LVL0_PLM - LVL0_PLM IRQ
|
||
//GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {74} // 0x1F2 -PM_INT__BCL_PLM__VCOMP_LVL2_PLM - LVL2_PLM IRQ
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {75} // 0x1F3 - PM_INT__BCL_PLM__VCOMP_BA - BAN alarm IRQ
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {336} // 0x210 - PM_INT__FG_BCL__IBT_HI - ibatt high IRQ
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {337} // 0x211 - PM_INT__FG_BCL__IBT_THI - ibatt too high IRQ
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {339} // 0x213 - PM_INT__FG_BCL__VBT_LO_CMP - vbatt low irq
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {340} // 0x214 - PM_INT__FG_BCL__VBT_TLO_CMP - vbatt too low irq
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {324} // 0x204 - PM_INT__FG_BATT_SOC__MSOC_LOW - MSOC_Low Interrupt
|
||
GpioInt(Edge, ActiveHigh, Shared, PullUp, 0, "\\_SB.PM01",,,,) {326} // 0x206 - PM_INT__FG_BATT_SOC__MSOC_HIGH - MSOC_HI Interrupt
|
||
GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.PM01",,,,RawDataBuffer(){0x08}) {344} // 0x218 - PM_INT__FG_LMH__LMH_LVL0 - LMH_LVL0 IRQ
|
||
GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.PM01",,,,RawDataBuffer(){0x08}) {345} // 0x219 - PM_INT__FG_LMH__LMH_LVL1 - LMH_LVL1 IRQ
|
||
GpioInt(Edge, ActiveBoth, Shared, PullUp, 0, "\\_SB.PM01",,,,RawDataBuffer(){0x08}) {346} // 0x21A - PM_INT__FG_LMH__LMH_LVL2 - LMH_LVL2 IRQ
|
||
|
||
})
|
||
Return (RBUF)
|
||
}
|
||
//ACPI methods for FGBCL device
|
||
Method (BCLS) {
|
||
Name (CFG0,
|
||
Package(){
|
||
3, //* FGBCL ACPI revision
|
||
7, //* 0: BCL disabled, 1: vph_pwr bcl enabled, 2: fg vbatt enabled, 4: fg ibatt enabled
|
||
5000, //* battery ocp current
|
||
80, //* ibatt high threshold is set to 80 for 80% of OCP
|
||
90, //* ibatt too high is set to 90 for 90% of OCP
|
||
2800, //* vbatt low is set to 2800 mV
|
||
2600, //* vbatt too low is set to 2600 mV
|
||
3200, //* vcomp_low0 threshold is 3200 mv
|
||
2750, //* vcomp_low1 threshold is 2750 mv
|
||
2500, //* vcomp_low2 threshold is 2500 mV
|
||
10, //* poll timer for battery soc polling.
|
||
1, //* 1- enable battery percent notification. 0-disable battery percent notification
|
||
2000, //* debug board Min battery ID in Ohm
|
||
14000 //* debug board Max battery ID in Ohm
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
//ACPI methods for Interrupt Name
|
||
Method (BCLQ) {
|
||
Name (CFG0,
|
||
Package(){
|
||
"VCOMP_LOW0", //vcomp_low0 IRQ
|
||
"VCOMP_LOW1", //vcomp_low1 IRQ
|
||
"VCOMP_LOW2", //vcomp_low2 IRQ
|
||
"VCOMP_HI", //vcomp_hi IRQ
|
||
//"SYS_OK", // sys_ok irq
|
||
//"LVL0_PLM", // LVL0_PLM IRQ
|
||
//"LVL1_PLM" // LVL1_PLM IRQ
|
||
//"LVL2_PLM", //LVL2_PLM IRQ
|
||
"BAN_ALARM", // BAN_ALARM IRQ
|
||
"IBATT_HI", // IBATT HIGH IRQ
|
||
"IBATT_THI", // IBATT TOO HIGH IRQ
|
||
"VBATT_LOW", // VBATT_LOW IRQ
|
||
"VBATT_TLOW", // VBATT TOO LOW IRQ
|
||
"MSOC_LOW", //monotonic soc low IRQ
|
||
"MSOC_HI", //monotonic soc high IRQ
|
||
"LMH_LVL0", //LMH_LVL0 IRQ
|
||
"LMH_LVL1", //LMH_LVL1 IRQ
|
||
"LMH_LVL2", //LMH_LVL2 IRQ
|
||
})
|
||
Return (CFG0)
|
||
}
|
||
}
|
||
|
||
//
|
||
//PMIC Type-C Controler Driver (PMICTCC) Driver
|
||
//
|
||
Device(PTCC)
|
||
{
|
||
Name (_HID, "QCOM02E6")
|
||
Alias(\_SB.PSUB, _SUB)
|
||
Name (_DEP, Package(0x1) {\_SB_.PMIC})
|
||
Method (_CRS, 0x0, NotSerialized) {
|
||
Name (RBUF, ResourceTemplate () {
|
||
GpioInt(Edge, ActiveHigh, SharedAndWake, PullNone, 0, "\\_SB.PM01",,,,) {239} // 0x9F - PM_INT__SCHG_USB__TYPE_C_OR_RID_DETECTION_CHANGE - CC State Changed IRQ
|
||
GpioInt(Edge, ActiveHigh, SharedAndWake, PullNone, 0, "\\_SB.PM01",,,,) {270} // 0xBE - PM_INT__USB_PD__MESSAGE_RX_DISCARDED - Message RX Discarded IRQ
|
||
GpioInt(Edge, ActiveHigh, SharedAndWake, PullNone, 0, "\\_SB.PM01",,,,) {269} // 0xBD - PM_INT__USB_PD__MESSAGE_TX_DISCARDED - Message TX Discarded IRQ
|
||
GpioInt(Edge, ActiveHigh, SharedAndWake, PullNone, 0, "\\_SB.PM01",,,,) {268} // 0xBC - PM_INT__USB_PD__MESSAGE_TX_FAILED - Message TX Failed IRQ
|
||
GpioInt(Edge, ActiveHigh, SharedAndWake, PullNone, 0, "\\_SB.PM01",,,,) {267} // 0xBB - PM_INT__USB_PD__MESSAGE_RECEIVED - Message Received IRQ
|
||
GpioInt(Edge, ActiveHigh, SharedAndWake, PullNone, 0, "\\_SB.PM01",,,,) {266} // 0xBA - PM_INT__USB_PD__MESSAGE_SENT - Message Sent IRQ
|
||
GpioInt(Edge, ActiveHigh, SharedAndWake, PullNone, 0, "\\_SB.PM01",,,,) {265} // 0xB9 - PM_INT__USB_PD__SIGNAL_RECEIVED - Singal Received IRQ
|
||
GpioInt(Edge, ActiveHigh, SharedAndWake, PullNone, 0, "\\_SB.PM01",,,,) {264} // 0xB8 - PM_INT__USB_PD__SIGNAL_SENT - Signal Sent IRQ
|
||
GpioInt(Edge, ActiveHigh, Exclusive, PullUp, 0, "\\_SB.PM01",,,,) {217} // 0x89 - PM_INT__SCHG_OTG__OTG_OVERCURRENT - OTG_OC_IRQ
|
||
GpioInt(Edge, ActiveBoth, Exclusive, PullUp, 0, "\\_SB.PM01",,,,) {263} // 0xB7 - PM_INT__SCHG_MISC__SWITCHER_POWER_OK - SWITCHER_POWER_OK (CHG_MISC)
|
||
GpioInt(Edge, ActiveHigh, Exclusive, PullUp, 0, "\\_SB.PM01",,,,) {235} // 0x9B - PM_INT__SCHG_USB__USBIN_OV - USBIN_OV (CHG_USB)
|
||
// GpioIo (Exclusive, PullUp, 0, 0, , "\\_SB.PM01", , , , ) {493} // 0x668 - PM_INT__PM2_GPIO14__GPIO_IN_STS - GPIO14B – For Type-C Debug Accessory Mode
|
||
})
|
||
Return (RBUF)
|
||
}
|
||
}
|