571 lines
22 KiB
Plaintext
571 lines
22 KiB
Plaintext
//
|
|
//CPU Aggregator Device -- Required for Thermal Parking
|
|
Device(AGR0)
|
|
{
|
|
Name(_HID, "ACPI000C")
|
|
Name(_PUR, Package() {1, 0})
|
|
Method(_OST, 0x3, NotSerialized)
|
|
{
|
|
Store(Arg2, \_SB_.PEP0.ROST)
|
|
}
|
|
}
|
|
|
|
//---------------------------------------------------------------------
|
|
//
|
|
// Thermal Zones for QC reference hardware
|
|
//
|
|
//TZ0 - TZ39 are thermal zones developed by QC for reference hardware
|
|
//and can be modified by the OEMs.
|
|
//---------------------------------------------------------------------
|
|
|
|
//---------------------------------------------------------------------
|
|
// Thermal Zones(0-19) for CPU sensors
|
|
//24AD - Little CPU virtual sensor
|
|
//24AE - Big CPU virtual sensor
|
|
// This thermal zone is only used for temperature logging for little CPUs
|
|
// as you may notice that _PSV, _TC1, _TC2, _TSP params are removed.
|
|
// This is the passive cooling mechanism by dialing down frequency is now
|
|
// done actively by hardware.
|
|
//---------------------------------------------------------------------
|
|
ThermalZone (TZ0) {
|
|
Name (_HID, "QCOM02B0")
|
|
Name (_UID, 0)
|
|
Name(_TZD, Package (){\_SB.SYSM.CLUS.CPU0, \_SB.SYSM.CLUS.CPU1, \_SB.SYSM.CLUS.CPU2, \_SB.SYSM.CLUS.CPU3})
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0})
|
|
}
|
|
} // end of TZ0
|
|
|
|
//Regular Thermal Zone for Little CPU TSENS to Park cores at 110C
|
|
ThermalZone (TZ1) {
|
|
Name (_HID, "QCOM02B0")
|
|
Name (_UID, 1)
|
|
Name(_TZD, Package (){\_SB.PEP0})
|
|
Name(TPSV, 3830)
|
|
Method(_PSV) { Return (\_SB.TZ1.TPSV) }
|
|
Name(_MTL, 20) // minimum throttle limit
|
|
//Control how aggressively the thermal manager applies thermal
|
|
//throttling performance against temperature change.
|
|
Name(TTC1, 0)
|
|
Method(_TC1) { Return (\_SB.TZ1.TTC1) }
|
|
|
|
// _TC2 Controls how aggressively the thermal manager applies thermal
|
|
// throttling performance against temperature delta between the
|
|
// current temperature and _PSV.
|
|
// once the temp goes above _PSV, we like to have aggressive
|
|
// throttling based on how far above the temp is above the threshold.
|
|
// Since that is controlled via _TC2, we like it to be high.
|
|
// please refer to the ACPI spec 6.0 to understand the significance of
|
|
// _TC2 or take a look at the explanation at the top of this file.
|
|
Name(TTC2, 1)
|
|
Method(_TC2) { Return (\_SB.TZ1.TTC2) }
|
|
|
|
// Appropriate temperature sampling interval for the zone in tenths
|
|
// of a second. The thermal manager uses this interval to determine
|
|
// how often it should evaluate the thermal throttling performance.
|
|
// Must be greater than zero. For more information, see Thermal
|
|
// throttling algorithm on msdn page
|
|
// https://msdn.microsoft.com/en-us/library/windows/hardware/mt643928(v=vs.85).aspx
|
|
Name(TTSP, 50)
|
|
Method(_TSP) { Return (\_SB.TZ1.TTSP) }
|
|
|
|
// This optional object evaluates to a recommended polling frequency
|
|
// (in tenths of seconds) for this thermal zone. A value of zero indicates
|
|
// that OSPM does not need to poll the temperature of this thermal zone in
|
|
// order to detect temperature changes (the hardware is capable of
|
|
// generating asynchronous notifications).
|
|
// TZP should be marked 0 for all thermal zones as our TSENS sensors
|
|
// generate interrupts to complete thermal IOCTL read call.
|
|
Name(_TZP, 0)
|
|
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0})
|
|
}
|
|
} // end of TZ1
|
|
|
|
// This thermal zone is only used for temperature logging for Big CPUs
|
|
// as you may notice that _PSV, _TC1, _TC2, _TSP params are removed.
|
|
// This is the passive cooling mechanism by dialing down frequency is now
|
|
// done actively by hardware.
|
|
ThermalZone (TZ2) {
|
|
Name (_HID, "QCOM02B1")
|
|
Name (_UID, 0)
|
|
Name(_TZD, Package (){\_SB.SYSM.CLUS.CPU4, \_SB.SYSM.CLUS.CPU5, \_SB.SYSM.CLUS.CPU6, \_SB.SYSM.CLUS.CPU7})
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0})
|
|
}
|
|
} // end of TZ2
|
|
|
|
//Regular Thermal Zone for BigCPU TSENS to Park cores at 110C
|
|
ThermalZone (TZ3) {
|
|
Name (_HID, "QCOM02B1")
|
|
Name (_UID, 1)
|
|
Name(_TZD, Package (){\_SB.PEP0})
|
|
|
|
Name(TPSV, 3830)
|
|
Method(_PSV) { Return (\_SB.TZ3.TPSV) }
|
|
Name(TTC1, 0)
|
|
Method(_TC1) { Return (\_SB.TZ3.TTC1) }
|
|
Name(TTC2, 1)
|
|
Method(_TC2) { Return (\_SB.TZ3.TTC2) }
|
|
Name(TTSP, 1)
|
|
Method(_TSP) { Return (\_SB.TZ3.TTSP) }
|
|
Name(_MTL, 20) // minimum throttle limit
|
|
Name(_TZP, 0)
|
|
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0})
|
|
}
|
|
} // end of TZ3
|
|
|
|
//---------------------------------------------------------------------
|
|
// Thermal Zones(20-21) for GPU TSENS
|
|
//
|
|
// \_SB.GPU0 should be used for GPU thermal mitigation, and
|
|
// \_SB.GPU0.AVS0 should be used for MDSS/Video thermal mitigation.
|
|
// Currently there is no handling for Video thermal mitigation.
|
|
// When needed, Video will be added to GPU0.AVS0 interface.
|
|
//---------------------------------------------------------------------
|
|
//Thermal zone for TSENS11 dial back GPUs at 95C
|
|
ThermalZone (TZ20) {
|
|
Name (_HID, "QCOM02AB")
|
|
Name (_UID, 0)
|
|
Name(_TZD, Package (){\_SB.GPU0})
|
|
Name(TPSV, 3680)
|
|
Method(_PSV) { Return (\_SB.TZ20.TPSV) }
|
|
Name(TTC1, 1)
|
|
Method(_TC1) { Return (\_SB.TZ20.TTC1) }
|
|
// For non-cpu devices, tc2 should be atleast 5, please refer to the
|
|
// explanation at the top of the file or msdn link for thermal guide.
|
|
Name(TTC2, 2)
|
|
Method(_TC2) { Return (\_SB.TZ20.TTC2) }
|
|
// For non-cpu devices, _tsp should be 20 or 30
|
|
Name(TTSP, 2)
|
|
Method(_TSP) { Return (\_SB.TZ20.TTSP) }
|
|
Name(_TZP, 0)
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0})
|
|
}
|
|
} // end of TZ20
|
|
|
|
//Thermal zone for TSENS12 to dial back GPUs at 95C
|
|
ThermalZone (TZ21) {
|
|
Name (_HID, "QCOM02AC")
|
|
Name (_UID, 0)
|
|
Name(_TZD, Package (){\_SB.GPU0})
|
|
Name(TPSV, 3680)
|
|
Method(_PSV) { Return (\_SB.TZ21.TPSV) }
|
|
Name(TTC1, 1)
|
|
Method(_TC1) { Return (\_SB.TZ21.TTC1) }
|
|
Name(TTC2, 2)
|
|
Method(_TC2) { Return (\_SB.TZ21.TTC2) }
|
|
Name(TTSP, 2)
|
|
Method(_TSP) { Return (\_SB.TZ21.TTSP) }
|
|
Name(_TZP, 0)
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0})
|
|
}
|
|
} // end of TZ21
|
|
|
|
//---------------------------------------------------------------------
|
|
// Thermal Zones for QDSP TSENS
|
|
//4/16/15: TODO waiting to get a new HID assigned for TSENS17
|
|
//---------------------------------------------------------------------
|
|
//Thermall zone for TSENS14 dial back MSM at 95C
|
|
//ThermalZone (TZ31) {
|
|
//Name (_HID, "QCOM02AE")
|
|
//Name (_UID, 0)
|
|
//Name(_TZD, Package (){
|
|
//\_SB.SYSM.CLUS.CPU0, \_SB.SYSM.CLUS.CPU1, \_SB.SYSM.CLUS.CPU2, \_SB.SYSM.CLUS.CPU3,
|
|
//\_SB.PEP0, \_SB.GPU0.MON0, \_SB.GPU0})
|
|
//Method(_PSV) { Return (3680) }
|
|
//Name(_TC1, 1)
|
|
//Name(_TC2, 2)
|
|
//Name(_TSP, 10)
|
|
//Name(_TZP, 0)
|
|
//Method(_DEP) {
|
|
// Return (Package() {\_SB.PEP0})
|
|
//}
|
|
//} // end of TZ31
|
|
|
|
//---------------------------------------------------------------------
|
|
// Thermal Zones for Camera TSENS
|
|
//---------------------------------------------------------------------
|
|
//Thermal zone for TSENS17 to dial back MSM at 95C
|
|
// ThermalZone (TZ32) {
|
|
// Name (_HID, "QCOM02C9")
|
|
// Name (_UID, 0)
|
|
// Name(_TZD, Package (){\_SB.GPU0.AVS0})
|
|
// Name(TPSV, 3680)
|
|
// Method(_PSV) { Return (\_SB.TZ32.TPSV) }
|
|
// Name(TTC1, 1)
|
|
// Method(_TC1) { Return (\_SB.TZ32.TTC1) }
|
|
// // For non-cpu devices, tc2 should be atleast 5, please refer to the
|
|
// // explanation at the top of the file or msdn link for thermal guide.
|
|
// Name(TTC2, 2)
|
|
// Method(_TC2) { Return (\_SB.TZ32.TTC2) }
|
|
// // For non-cpu devices, _tsp should be 20 or 30
|
|
// Name(TTSP, 10)
|
|
// Method(_TSP) { Return (\_SB.TZ32.TTSP) }
|
|
// Name(_TZP, 0)
|
|
// Method(_DEP) {
|
|
// Return (Package() {\_SB.PEP0})
|
|
// }
|
|
// } // end of TZ32
|
|
|
|
ThermalZone (TZ33) {
|
|
Name (_HID, "QCOM02CB")
|
|
Name (_UID, 1)
|
|
Name(_TZD, Package (){\_SB.AMSS})
|
|
|
|
Name(TPSV, 3680)
|
|
Method(_PSV) { Return (\_SB.TZ33.TPSV) }
|
|
|
|
Name(TTC1, 1)
|
|
Method(_TC1) { Return (\_SB.TZ33.TTC1) }
|
|
|
|
Name(TTC2, 2)
|
|
Method(_TC2) { Return (\_SB.TZ33.TTC2) }
|
|
|
|
Name(TTSP, 10)
|
|
Method(_TSP) { Return (\_SB.TZ33.TTSP) }
|
|
|
|
Name(_TZP, 0)
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0})
|
|
}
|
|
}
|
|
|
|
//---------------------------------------------------------------------
|
|
// Thermal Zones for MDSS TENS (Display Subsystem)
|
|
// Only the MDP Blt engine and Rotator engines on the MDSS are cooled
|
|
// using this interface. Display cooling is not supported currently.
|
|
//---------------------------------------------------------------------
|
|
//Thermal zone for TSENS18 to dial back MSM at 95C
|
|
//ThermalZone (TZ34) {
|
|
//Name (_HID, "QCOM02CA")
|
|
//Name (_UID, 0)
|
|
//Name(_TZD, Package (){\_SB.GPU0.AVS0})
|
|
//Method(_PSV) { Return (3680) }
|
|
//Name(_TC1, 1)
|
|
//Name(_TC2, 2)
|
|
//Name(_TSP, 10)
|
|
//Name(_TZP, 0)
|
|
//Method(_DEP) {
|
|
// Return (Package() {\_SB.PEP0})
|
|
//}
|
|
//} // end of TZ34
|
|
|
|
//---------------------------------------------------------------------
|
|
// Thermal Zones for ADC Channels
|
|
//---------------------------------------------------------------------
|
|
//Thermal zone for PMIC_THERM
|
|
ThermalZone (TZ36) {
|
|
Name (_HID, "QCOM029E")
|
|
Name (_UID, 0)
|
|
Name(_TZD, Package (){
|
|
\_SB.SYSM.CLUS.CPU0, \_SB.SYSM.CLUS.CPU1, \_SB.SYSM.CLUS.CPU2, \_SB.SYSM.CLUS.CPU3,
|
|
\_SB.SYSM.CLUS.CPU4, \_SB.SYSM.CLUS.CPU5, \_SB.SYSM.CLUS.CPU6, \_SB.SYSM.CLUS.CPU7,
|
|
\_SB.PMBM})
|
|
|
|
Name(TPSV, 3780)
|
|
Method(_PSV) { Return (\_SB.TZ36.TPSV) }
|
|
|
|
Name(TTC1, 4)
|
|
Method(_TC1) { Return (\_SB.TZ36.TTC1) }
|
|
|
|
Name(TTC2, 3)
|
|
Method(_TC2) { Return (\_SB.TZ36.TTC2) }
|
|
|
|
Name(TTSP, 50)
|
|
Method(_TSP) { Return (\_SB.TZ36.TTSP) }
|
|
|
|
Name(_TZP, 0)
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0, \_SB.ADC1})
|
|
}
|
|
} // end of TZ36
|
|
|
|
//Thermal zone for PMIC_THERM
|
|
ThermalZone (TZ37) {
|
|
Name (_HID, "QCOM029E")
|
|
Name (_UID, 1)
|
|
Name(_TZD, Package (){
|
|
\_SB.PEP0, \_SB.PMBM})
|
|
Name(TPSV, 3980)
|
|
Method(_PSV) { Return (\_SB.TZ37.TPSV) }
|
|
Name(TCRT, 4180)
|
|
Method(_CRT) { Return (\_SB.TZ37.TCRT) }
|
|
Name(TTC1, 4)
|
|
Method(_TC1) { Return (\_SB.TZ37.TTC1) }
|
|
Name(TTC2, 3)
|
|
Method(_TC2) { Return (\_SB.TZ37.TTC2) }
|
|
Name(TTSP, 50)
|
|
Method(_TSP) { Return (\_SB.TZ37.TTSP) }
|
|
|
|
Name(_TZP, 0)
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0, \_SB.ADC1})
|
|
}
|
|
} // end of TZ37
|
|
|
|
//Example: Inverse Thermal zone for PMIC_THERM
|
|
ThermalZone (TZ38) {
|
|
Name (_HID, "QCOM029E")
|
|
Name (_UID, 2) //Update UID on addition of new thermal zone with same HID
|
|
Name(_TZD, Package (){
|
|
\_SB.PEP0})
|
|
Method(INVT) { Return (1) }
|
|
Method(_MTL) { Return (60) }
|
|
Name(TPSV, 2830)
|
|
Method(_PSV) { Return (\_SB.TZ38.TPSV) }
|
|
Name(TTC1, 4)
|
|
Method(_TC1) { Return (\_SB.TZ38.TTC1) }
|
|
Name(TTC2, 3)
|
|
Method(_TC2) { Return (\_SB.TZ38.TTC2) }
|
|
Name(TTSP, 10)
|
|
Method(_TSP) { Return (\_SB.TZ38.TTSP) }
|
|
Name(_TZP, 0)
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0, \_SB.ADC1})
|
|
}
|
|
} // end of TZ38
|
|
|
|
//------------------------------------------------------------------------
|
|
// Thermal Zones for Wlan
|
|
//------------------------------------------------------------------------
|
|
//Thermal zone for iHelium, Wlan MAC&PHY on SOC
|
|
ThermalZone (TZ40) {
|
|
Name (_HID, "QCOM02AF")
|
|
Name (_UID, 0)
|
|
Name(_TZD, Package (){\_SB.COEX})
|
|
|
|
Name(TPSV, 3580)
|
|
Method(_PSV) { Return (\_SB.TZ40.TPSV) }
|
|
Name(TTC1, 1)
|
|
Method(_TC1) { Return (\_SB.TZ40.TTC1) }
|
|
Name(TTC2, 5) // For non-cpu devices, tc2 should be atleast 5
|
|
Method(_TC2) { Return (\_SB.TZ40.TTC2) }
|
|
Name(TTSP, 30) // For non-cpu devices, _tsp should be 20 or 30
|
|
Method(_TSP) { Return (\_SB.TZ40.TTSP) }
|
|
|
|
Name(_TZP, 0)
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0})
|
|
}
|
|
} // end of TZ40
|
|
//Thermal zone for Cherokee, Wlan radio on WCN3990
|
|
ThermalZone (TZ41) {
|
|
Name (_HID, "QCOM0295")//virtual sensor by wlan WMI thermal interface
|
|
Name (_UID, 1)
|
|
//Name(_TZD, Package (){\_SB.COEX}) // Temperature report only
|
|
//Method(_PSV) { Return (4030) }
|
|
//Name(_TC1, 4)
|
|
//Name(_TC2, 3)
|
|
Name(_TSP, 50)
|
|
Name(_TZP, 0)
|
|
} // end of TZ41
|
|
|
|
//------------------------------------------------------------------------
|
|
// Thermal Zones for DDR/POP
|
|
//------------------------------------------------------------------------
|
|
//Thermal zone for DDR
|
|
//Thermal zone for TSENS20 to dial back Big CPU's at 95C
|
|
|
|
ThermalZone (TZ44) {
|
|
Name (_HID, "QCOM02CC")
|
|
Name (_UID, 0)
|
|
Name(_TZD, Package (){\_SB.SYSM.CLUS.CPU4, \_SB.SYSM.CLUS.CPU5, \_SB.SYSM.CLUS.CPU6, \_SB.SYSM.CLUS.CPU7})
|
|
Name(TPSV, 3680)
|
|
Method(_PSV) { Return (\_SB.TZ44.TPSV) }
|
|
Name(TTC1, 0)
|
|
Method(_TC1) { Return (\_SB.TZ44.TTC1) }
|
|
Name(TTC2, 1)
|
|
Method(_TC2) { Return (\_SB.TZ44.TTC2) }
|
|
Name(TTSP, 1)
|
|
Method(_TSP) { Return (\_SB.TZ44.TTSP) }
|
|
Name(_TZP, 0)
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0})
|
|
}
|
|
} // end of TZ44
|
|
|
|
//---------------------------------------------------------------------
|
|
//
|
|
// QC Recommended thermal limits starts
|
|
//
|
|
//TZ80 - TZ98 represent the thermal zones corresponding to QC
|
|
//recommended thermal limits. These thermal zones must not be removed
|
|
//or tampered with.
|
|
//---------------------------------------------------------------------
|
|
//Thermal zone for TSENS2 at 70C to match the LA thermal limits
|
|
//ThermalZone (TZ80) {
|
|
//Name (_HID, "QCOM2472")
|
|
//Name (_UID, 0)
|
|
//Name(_TZD, Package (){
|
|
// \_SB.SYSM.CLUS.CPU0, \_SB.SYSM.CLUS.CPU1, \_SB.SYSM.CLUS.CPU2, \_SB.SYSM.CLUS.CPU3,
|
|
//Method(_PSV) { Return (3430) }
|
|
//Name(_TC1, 1)
|
|
//Name(_TC2, 2)
|
|
//Name(_TSP, 10)
|
|
//Name(_TZP, 0)
|
|
//Method(_DEP) {
|
|
// Return (Package() {\_SB.PEP0})
|
|
//}
|
|
//} // end of TZ80
|
|
|
|
//Thermal zone near for TSENS2 to shutdown the system at 85C to match LA
|
|
//thermal limits
|
|
//ThermalZone (TZ81) {
|
|
//Name (_HID, "QCOM2472")
|
|
//Name (_UID, 1)
|
|
//Name(_TZD, Package (){
|
|
// \_SB.SYSM.CLUS.CPU0, \_SB.SYSM.CLUS.CPU1, \_SB.SYSM.CLUS.CPU2, \_SB.SYSM.CLUS.CPU3,
|
|
// \_SB.PEP0})
|
|
//Method(_PSV) { Return (3530) }
|
|
//Method(_CRT) { Return (3580) }
|
|
//Name(_TC1, 1)
|
|
//Name(_TC2, 2)
|
|
//Name(_TSP, 10)
|
|
//Name(_TZP, 0)
|
|
//Method(_DEP) {
|
|
// Return (Package() {\_SB.PEP0})
|
|
//}
|
|
//} // end of TZ81
|
|
|
|
//Entry for BCL thermal zone
|
|
ThermalZone (TZ98) {
|
|
Name (_HID, "QCOM0294")
|
|
Name (_UID, 0)
|
|
Name(_TZD, Package (){
|
|
\_SB.GPU0.MON0, \_SB.GPU0})
|
|
|
|
Name(TPSV, 3630)
|
|
Method(_PSV) { Return (\_SB.TZ98.TPSV) }
|
|
Name(TTC1, 1)
|
|
Method(_TC1) { Return (\_SB.TZ98.TTC1) }
|
|
//Method(_CRT) { Return (5630) }
|
|
Name(TTC2, 5)
|
|
Method(_TC2) { Return (\_SB.TZ98.TTC2) }
|
|
Name(TTSP, 20)
|
|
Method(_TSP) { Return (\_SB.TZ98.TTSP) }
|
|
|
|
Name(_TZP, 0)
|
|
Method(_DEP) {
|
|
Return (Package(0x2) {\_SB.PEP0,\_SB_.BCL1})
|
|
}
|
|
} // end of TZ98
|
|
|
|
//---------------------------------------------------------------------
|
|
// Critical Thermal Zones for ALL TSENS
|
|
//This sensor aggregates all the on chip TSENS into a single sensor
|
|
//for ACPI thermal manager. By having a critical thermal zone on this
|
|
//"virtual sensor" we don't have to add a critical thermal zone on every
|
|
//sensor and hence reduce the number of thermal zones.
|
|
//---------------------------------------------------------------------
|
|
//Critical Thermal zone on MSM virtual sensor to shutdown entire system
|
|
//at 110C.
|
|
ThermalZone (TZ99) {
|
|
Name (_HID, "QCOM02B2")
|
|
Name (_UID, 100)
|
|
|
|
Name(TCRT, 3830)
|
|
Method(_CRT) { Return (\_SB.TZ99.TCRT) }
|
|
Name(TTC1, 4)
|
|
Method(_TC1) { Return (\_SB.TZ99.TTC1) }
|
|
Name(TTC2, 3)
|
|
Method(_TC2) { Return (\_SB.TZ99.TTC2) }
|
|
Name(TTSP, 10)
|
|
Method(_TSP) { Return (\_SB.TZ99.TTSP) }
|
|
Name(_TZP, 0)
|
|
|
|
Method(_DEP) {
|
|
Return (Package() {\_SB.PEP0})
|
|
}
|
|
} // end of TZ99
|
|
|
|
//---------------------------------------------------------------------
|
|
// QC Recommended thermal limits ends
|
|
//---------------------------------------------------------------------
|
|
|
|
//---------------------------------------------------------------------
|
|
//
|
|
// Sample Thermal Zones for OEMs TZ40 - TZ79
|
|
//
|
|
//Sample TSENS thermal zone that can be added on any TSENS
|
|
//---------------------------------------------------------------------
|
|
//ThermalZone (TZ40) {
|
|
//Name (_HID, "QCOM2470")
|
|
//Name (_UID, 0)
|
|
//Name(_TZD, Package (){
|
|
//\_SB.SYSM.CLUS.CPU0, \_SB.SYSM.CLUS.CPU1, \_SB.SYSM.CLUS.CPU2, \_SB.SYSM.CLUS.CPU3,\_SB.SYSM.CLUS.CPU4, \_SB.SYSM.CLUS.CPU5,
|
|
//\_SB.PEP0, <Your cooling device>})
|
|
//Method(_PSV) { Return (3730) }
|
|
//Method(_CRT) { Return (3780) }
|
|
//Name(_TC1, 1)
|
|
//Name(_TC2, 2)
|
|
//Name(_TSP, 10) //Sampling rate of 1sec
|
|
//Name(_TZP, 0)
|
|
//Method(_DEP) {
|
|
// Return (Package() {\_SB.PEP0})
|
|
//}
|
|
//} // end of TZ40
|
|
|
|
//ThermalZone (TZ41) {
|
|
//Name (_HID, "QCOM2470")
|
|
//Name (_UID, 0)
|
|
//Name(_TZD, Package (){
|
|
//\_SB.SYSM.CLUS.CPU0, \_SB.SYSM.CLUS.CPU1, \_SB.SYSM.CLUS.CPU2, \_SB.SYSM.CLUS.CPU3,\_SB.SYSM.CLUS.CPU4, \_SB.SYSM.CLUS.CPU5,
|
|
//\_SB.PEP0, <Your cooling device>})
|
|
//Method(_PSV) { Return (3730) }
|
|
//Method(_CRT) { Return (3780) }
|
|
//Name(_TC1, 1)
|
|
//Name(_TC2, 2)
|
|
//Name(_TSP, 50) //Sampling rate of 5sec
|
|
//Name(_TZP, 0)
|
|
//Method(_DEP) {
|
|
// Return (Package() {\_SB.PEP0})
|
|
//}
|
|
//} // end of TZ41
|
|
|
|
|
|
//--------------------------------------------------------------------------//
|
|
//
|
|
// Sample VADC Thermal zones for OEMs
|
|
//
|
|
//Following are sample thermal zones that use the off chip ADC thermistors
|
|
//they are all currently using CPUs as a cooling device for a lack of better
|
|
//option. The OEMs should change this.
|
|
//--------------------------------------------------------------------------//
|
|
|
|
//Thermal zone for SYS_THERM2
|
|
// ThermalZone (TZ51) {
|
|
// Name (_HID, "QCOM248D")
|
|
// Name (_UID, 0)
|
|
// Name(_TZD, Package (){
|
|
//\_SB.SYSM.CLUS.CPU0, \_SB.SYSM.CLUS.CPU1, \_SB.SYSM.CLUS.CPU2, \_SB.SYSM.CLUS.CPU3,\_SB.SYSM.CLUS.CPU4, \_SB.SYSM.CLUS.CPU5,})
|
|
// Method(_PSV) { Return (3830) }
|
|
//Name(_TC1, 4)
|
|
//Name(_TC2, 3)
|
|
// Name(_TSP, 50)
|
|
//Name(_TZP, 0)
|
|
//Method(_DEP) {
|
|
// Return (Package() {\_SB.PEP0})
|
|
//}
|
|
// } // end of TZ51
|
|
|
|
//Thermal zone for PA_THERM1
|
|
// ThermalZone (TZ52) {
|
|
// Name (_HID, "QCOM248E")
|
|
// Name (_UID, 0)
|
|
// Name(_TZD, Package (){\_SB.SYSM.CLUS.CPU0, \_SB.SYSM.CLUS.CPU1, \_SB.SYSM.CLUS.CPU2, \_SB.SYSM.CLUS.CPU3})
|
|
// Method(_PSV) { Return (3430) }
|
|
// Name(_TC1, 4)
|
|
// Name(_TC2, 3)
|
|
// Name(_TSP, 50)
|
|
// Name(_TZP, 0)
|
|
//Method(_DEP) {
|
|
// Return (Package() {\_SB.PEP0})
|
|
//}
|
|
// } // end of TZ52
|