Adds documentation to help and man pages for legacy pass-through behavior
when force is set and destination is stdout. Documents --pass-through in
man pages
Fixes#3211.
Adds the `--[no-]pass-through` flag which enables/disables pass-through mode.
* `zstdcat`, `zcat`, and `gzcat` default to `--pass-through`.
Pass-through mode can be disabled by passing `--no-pass-through`.
* All other binaries default to not setting pass-through mode.
However, we preserve the legacy behavior of enabling pass-through
mode when writing to stdout with `-f` set, unless pass-through
mode is explicitly disabled with `--no-pass-through`.
Adds a new test for this behavior that should codify the behavior we want.
fileio_types.h cannot be parsed by itself
because it relies on basic types defined in `lib/common/mem.h`.
As for #3231, it likely wasn't detected because `mem.h` was probably included before within target files.
But this is not proper.
A "easy" solution would be to add the missing include,
but each dependency should be considered "bad" by default,
and only allowed if it brings some tangible value.
In this case, since these types are only used to declare internal structure variables
which are effectively only flags,
I believe it's really not valuable to add a dependency on `mem.h` for this purpose
while the standard `int` type can do the same job.
I was expecting some compiler warnings following this change,
but it turns out we don't use `-Wconversion` by default on `zstd` source code,
so there is none.
Nevertheless, I enabled `-Wconversion` locally and proceeded to fix a few conversion warnings in the process.
Adding `-Wconversion` to the list of flags used for `zstd` is something I would be favorable over the long term,
but it cannot be done overnight,
because the nb of places where this warning is triggered is daunting.
Better progressively reduce the nb of triggered `-Wconversion` warnings before enabling this flag by default.
Fixes#3212.
Long literal and match lengths had an off-by-one error in ZSTD_getSequenceLength.
Fix the off-by-one error, and add a golden compression test that catches the bug.
Also run all the golden tests in the cli-tests framework.
The discussion for this task is here: facebook/zstd#3128.
This task can probably be scoped to the first part: marking these functions deprecated.
We'll later look at removal when we roll out v1.6.0.
When user pass in argument for both decompression and multi-thread, print a warning message
to indicate that multi-threaded decompression is not supported.
* Add warning when multi-thread decompression is requested
* add test case for multi-threaded decoding warning
Expectation is for -d -T0 we will not throw any warning,
and see warning for any other -d -T(>1) inputs
In zlib 1.2.12 the OF macro was changed to _Z_OF breaking any
project that used zlibWrapper. To fix this the OF has been
changed to _Z_OF everywhere and _Z_OF is defined as OF in the
case it is not yet defined for zlib 1.2.11 and older.
Fixes: https://github.com/facebook/zstd/issues/3216
* Fixing compiler warnings
* Replace the old -s flag with the -Wl,-s flag
* Fixing compiler warnings
* Fixing the linker strip flag and tests/code not working as expected on AIX
With statistic data of test data files of silesia
the chance of position beyond highThreshold is very
low (~1.3%@L8 in most cases, all <2.5%), and is in
"lowprob area". Add the branch hint so compiler can
get better pipiline codegen.
With this change it is observed ~1% of mozilla and
xml, and slight (0.3%~0.8%) but consistent uplift on
other files on Arm N1.
Signed-off-by: Jun He <jun.he@arm.com>
Change-Id: Id9ba1d5c767e975290b5c1bf0ecce906544f4ade
match is used for following sequence copy. It is
only updated when extDict is needed, which is a
low probability case. So it can be prefetched to
reduce cache miss.
The benchmarks on various Arm platforms showed
uplift from 1% ~ 14% with gcc-11/clang-14.
Signed-off-by: Jun He <jun.he@arm.com>
Change-Id: If201af4799d2455d74c79f8387404439d7f684ae
Summary:
Freeing an uninitialized pointer is undefined behavior. This caused a segfault
when compiling the benchmark with Clang -O3 and benching decompression.
V2: always create compressInstructions but check if cctxParams is NULL before
setting CCtx params to avoid segfault.
Test Plan:
make and run
Summary:
Added an option -p# where -p0 (default) sets the aggregation method to fastest
speed while -p1 sets the aggregation method to median. Also added a new column
in the csv file to report this option's value.
Test Plan:
``
$ ./largeNbDicts -1 --nbDicts=1 -D ~/benchmarks/html/html_8_16K.32K.dict
~/benchmarks/html/html_8_16K/*
loading 7450 files...
created src buffer of size 83.4 MB
split input into 7450 blocks
loading dictionary /home/zhuhan/benchmarks/html/html_8_16K.32K.dict
compressing at level 1 without dictionary : Ratio=3.03 (28827863 bytes)
compressed using a 32768 bytes dictionary : Ratio=4.28 (20410262 bytes)
generating 1 dictionaries, using 0.1 MB of memory
Compression Speed : 306.0 MB/s
Fastest Speed : 310.6 MB/s
$ ./largeNbDicts -1 --nbDicts=1 -p1 -D ~/benchmarks/html/html_8_16K.32K.dict
~/benchmarks/html/html_8_16K/*
loading 7450 files...
created src buffer of size 83.4 MB
split input into 7450 blocks
loading dictionary /home/zhuhan/benchmarks/html/html_8_16K.32K.dict
compressing at level 1 without dictionary : Ratio=3.03 (28827863 bytes)
compressed using a 32768 bytes dictionary : Ratio=4.28 (20410262 bytes)
generating 1 dictionaries, using 0.1 MB of memory
Compression Speed : 306.9 MB/s
Median Speed : 298.4 MB/s
```
Summary:
Add column headers and data for whether it's a compression or a decompression
run, compression level, nbDicts and dictAttachPref in additional to
compr/decompr speed.
Test Plan:
Example output:
```
./largeNbDicts
Compression/Decompression,Level,nbDicts,dictAttachPref,Speed
Compression,1,1,0,300.9
Compression,1,1,1,296.4
Compression,1,1,2,307.8
Compression,1,10,0,292.3
Compression,1,100,0,293.3
Compression,3,110,0,106.0
Decompression,-1,110,-1,155.6
Decompression,-1,110,-1,709.4
Decompression,-1,120,-1,709.1
Decompression,-1,120,-1,734.6
```
Benchmarking decompression results in a segfault in `createCompressInstructions`
because `cctxParams` is NULL. Skip running that function if we are not benching
compression.
* Intial commit to address 3090. Added support to decompress empty block
* Update zstd_decompress_block.c
Addressed review comments for the case of 'set_basic'
* Update lib/decompress/zstd_decompress_block.c
Co-authored-by: Nick Terrell <nickrterrell@gmail.com>
* Update lib/decompress/zstd_decompress_block.c
Co-authored-by: Nick Terrell <nickrterrell@gmail.com>
Co-authored-by: Nick Terrell <nickrterrell@gmail.com>
The discussion for this task is here: facebook/zstd#3128.
This task can probably be scoped to the first part: marking these functions deprecated.
We'll later look at removal when we roll out v1.6.0.
