u-boot/arch/arm/cpu/armv7/sunxi
Hans de Goede fc175434f9 sun6i: cpu_reset: Do not return from cpu_reset()
Currently on sun6i after a "reset" the prompt returns and the user can
even type stuff until the watchdog triggers and does the actual reset.

This is somewhat unexpected behavior for the "reset" command, this
commit adds an endless loop to wait for the watchdog to trigger so that
we do not return to the prompt.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-17 15:22:47 +02:00
..
board.c sun6i: cpu_reset: Do not return from cpu_reset() 2015-06-17 15:22:47 +02:00
clock_sun4i.c sunxi: sun4i: improve cpu clock selection method 2015-03-29 13:08:39 +02:00
clock_sun6i.c sunxi: Add support for A33 PLL11 (second DRAM pll) 2015-05-04 16:51:51 +02:00
clock_sun9i.c sun9i: Add sun9i (A80) clock setup support 2015-01-22 12:34:55 +01:00
clock.c sunxi: add sun7i clocks and timer support. 2014-05-25 16:12:12 +02:00
config.mk sunxi: Normalise FEL support 2015-02-16 20:15:09 +01:00
cpu_info.c sun9i: Basic sun9i (A80) support 2015-05-29 13:46:36 +02:00
dram_helpers.c sunxi: dram: Un-inline dram helper functions 2015-02-16 20:05:52 +01:00
dram_sun4i.c sunxi: Make DRAM_ODT_EN Kconfig setting a bool 2015-05-19 18:46:44 +02:00
dram_sun6i.c sunxi: Fix buggy sun6i/sun8i DRAM size detection logic 2015-01-14 14:56:37 +01:00
dram_sun8i_a23.c sunxi: Make DRAM_ODT_EN Kconfig setting a bool 2015-05-19 18:46:44 +02:00
dram_sun8i_a33.c sunxi: Make DRAM_ODT_EN Kconfig setting a bool 2015-05-19 18:46:44 +02:00
fel_utils.S sunxi: Support the FEL boot mode in the regular u-boot build 2015-02-16 20:23:52 +01:00
Makefile ARM: sunxi: Share sun6i PSCI backend with sun8i 2015-05-29 13:46:36 +02:00
p2wi.c sun6i: s/SUNXI_*P2WI*/SUN6I_*P2WI*/ 2015-01-14 14:56:36 +01:00
pinmux.c dm: sunxi: Add pinmux functions which take a bank parameter 2014-11-05 13:09:58 +01:00
pmic_bus.c sunxi: axp: Add support for i2c based PMICs to the pmic-bus helpers 2015-05-04 16:51:53 +02:00
prcm.c ARM: sunxi: Allow specifying module in prcm apb0 init function 2014-10-24 09:35:39 +02:00
psci_sun6i.S ARM: sunxi: Share sun6i PSCI backend with sun8i 2015-05-29 13:46:36 +02:00
psci_sun7i.S ARM: sunxi: Make PSCI code sun7i specific 2015-05-29 13:46:36 +02:00
rsb.c sunxi: GPIO pin mux hardware-feature-specific function index defines 2015-04-15 16:17:17 +02:00
start.c sunxi: add sun7i cpu, board and start of day support 2014-05-25 16:12:40 +02:00
timer.c sunxi: add sun7i clocks and timer support. 2014-05-25 16:12:12 +02:00
u-boot-spl.lds sunxi: Add i2c support 2014-07-18 19:41:30 +01:00
usb_phy.c sunxi: usb_phy: Swap check for disconnect threshold 2015-06-04 14:11:01 +02:00