u-boot/arch/nios2/dts/3c120_devboard.dts
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

201 lines
4.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2013 Altera Corporation
*
* This file is generated by sopc2dts.
*/
/dts-v1/;
/ {
model = "altr,qsys_ghrd_3c120";
compatible = "altr,qsys_ghrd_3c120";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu: cpu@0x0 {
device_type = "cpu";
compatible = "altr,nios2-1.0";
reg = <0x00000000>;
interrupt-controller;
#interrupt-cells = <1>;
clock-frequency = <125000000>;
dcache-line-size = <32>;
icache-line-size = <32>;
dcache-size = <32768>;
icache-size = <32768>;
altr,implementation = "fast";
altr,pid-num-bits = <8>;
altr,tlb-num-ways = <16>;
altr,tlb-num-entries = <128>;
altr,tlb-ptr-sz = <7>;
altr,has-div = <1>;
altr,has-mul = <1>;
altr,reset-addr = <0xc2800000>;
altr,fast-tlb-miss-addr = <0xc7fff400>;
altr,exception-addr = <0xd0000020>;
altr,has-initda = <1>;
altr,has-mmu = <1>;
};
};
memory@0 {
device_type = "memory";
reg = <0x10000000 0x08000000>,
<0x07fff400 0x00000400>;
};
sopc@0 {
device_type = "soc";
ranges;
#address-cells = <1>;
#size-cells = <1>;
compatible = "altr,avalon", "simple-bus";
bus-frequency = <125000000>;
pb_cpu_to_io: bridge@0x8000000 {
compatible = "simple-bus";
reg = <0x08000000 0x00800000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00002000 0x08002000 0x00002000>,
<0x00004000 0x08004000 0x00000400>,
<0x00004400 0x08004400 0x00000040>,
<0x00004800 0x08004800 0x00000040>,
<0x00004c80 0x08004c80 0x00000020>,
<0x00004cc0 0x08004cc0 0x00000010>,
<0x00004ce0 0x08004ce0 0x00000010>,
<0x00004d00 0x08004d00 0x00000010>,
<0x00004d40 0x08004d40 0x00000008>,
<0x00004d50 0x08004d50 0x00000008>,
<0x00008000 0x08008000 0x00000020>,
<0x00400000 0x08400000 0x00000020>;
timer_1ms: timer@0x400000 {
compatible = "altr,timer-1.0";
reg = <0x00400000 0x00000020>;
interrupt-parent = <&cpu>;
interrupts = <11>;
clock-frequency = <125000000>;
};
timer_0: timer@0x8000 {
compatible = "altr,timer-1.0";
reg = < 0x00008000 0x00000020 >;
interrupt-parent = < &cpu >;
interrupts = < 5 >;
clock-frequency = < 125000000 >;
};
sysid: sysid@0x4d40 {
compatible = "altr,sysid-1.0";
reg = <0x00004d40 0x00000008>;
};
jtag_uart: serial@0x4d50 {
compatible = "altr,juart-1.0";
reg = <0x00004d50 0x00000008>;
interrupt-parent = <&cpu>;
interrupts = <1>;
};
tse_mac: ethernet@0x4000 {
compatible = "altr,tse-1.0";
reg = <0x00004000 0x00000400>,
<0x00004400 0x00000040>,
<0x00004800 0x00000040>,
<0x00002000 0x00002000>;
reg-names = "control_port", "rx_csr", "tx_csr", "s1";
interrupt-parent = <&cpu>;
interrupts = <2 3>;
interrupt-names = "rx_irq", "tx_irq";
rx-fifo-depth = <8192>;
tx-fifo-depth = <8192>;
max-frame-size = <1518>;
local-mac-address = [ 00 00 00 00 00 00 ];
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
tse_mac_mdio: mdio {
compatible = "altr,tse-mdio";
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@18 {
reg = <18>;
device_type = "ethernet-phy";
};
};
};
uart: serial@0x4c80 {
compatible = "altr,uart-1.0";
reg = <0x00004c80 0x00000020>;
interrupt-parent = <&cpu>;
interrupts = <10>;
current-speed = <115200>;
clock-frequency = <62500000>;
};
user_led_pio_8out: gpio@0x4cc0 {
compatible = "altr,pio-1.0";
reg = <0x00004cc0 0x00000010>;
resetvalue = <255>;
altr,gpio-bank-width = <8>;
#gpio-cells = <2>;
gpio-controller;
gpio-bank-name = "led";
};
user_dipsw_pio_8in: gpio@0x4ce0 {
compatible = "altr,pio-1.0";
reg = <0x00004ce0 0x00000010>;
interrupt-parent = <&cpu>;
interrupts = <8>;
edge_type = <2>;
level_trigger = <0>;
resetvalue = <0>;
altr,gpio-bank-width = <8>;
#gpio-cells = <2>;
gpio-controller;
gpio-bank-name = "dipsw";
};
user_pb_pio_4in: gpio@0x4d00 {
compatible = "altr,pio-1.0";
reg = <0x00004d00 0x00000010>;
interrupt-parent = <&cpu>;
interrupts = <9>;
edge_type = <2>;
level_trigger = <0>;
resetvalue = <0>;
altr,gpio-bank-width = <4>;
#gpio-cells = <2>;
gpio-controller;
gpio-bank-name = "pb";
};
};
cfi_flash_64m: flash@0x0 {
compatible = "cfi-flash";
reg = <0x00000000 0x04000000>;
bank-width = <2>;
device-width = <1>;
#address-cells = <1>;
#size-cells = <1>;
partition@800000 {
reg = <0x00800000 0x01e00000>;
label = "JFFS2 Filesystem";
};
};
};
chosen {
bootargs = "debug console=ttyJ0,115200";
stdout-path = &jtag_uart;
};
};